Professional Documents
Culture Documents
Mega - Type Series Booklet
Mega - Type Series Booklet
Centrifugal Pump
Application
The KSB Ajax Mega centrifugal pump is suitable for handling
water, condensate, oil, some aggressive chemical products
and other liquids mainly used in the following applications:
Water supply
Irrigation
Air conditioning
Fire fighting
Drainage
Heating
Chemical and petrochemical
Sugar and alcohol industry
Boiler feed
Auxilary circuits in refineries
Auxilary circuits in industry (paper, food, synthetic
fibres, others)
Design
Horizontal, single stage, end suction centrifugal pump dimensionally built to ISO 2858 and technical specification ISO 5199.
The back pull out design allows for easy maintenance and
repair as the rotating element may be removed without disturbing the pipework. Pump has wear rings as standard and
lifting eye on bearing bracket.
Designation
M
80
160
Model / Type
Discharge diameter (mm)
Nominal impeller diameter (mm)
Operating Data
Pump sizes
Flow
Head
Temperature
Speed
up to
up to
up to
up to
50 Hz
60 Hz
32 mm to 150 mm
150 L/s
175 L/s
160m
o
160 C
2900rpm
3500rpm
Mega
Selection Chart
1450 RPM
Selection Chart
2900 RPM
Mega
Construction
Accessories
Drive
The pump is only recommended for direct drive via a flexible
spacer coupling. Spacer couplings enable utilisation of the
back pull out feature.
Casing
Self-venting horizontal volute casing with horizontal end suction and vertical discharge. The casing has supporting feet
and is fitted with a wear ring. The suction nozzle includes a
vane to reduce prerotation.
Shaft
The shaft is of the dry type, with protection sleeve to prevent
contact with the pumped liquid (for packed gland only). For
standard mechanical seal models the shaft is in contact with
the pumped liquid.
Bearings
Grease lubrication Standard
Max. Pump temperature 105oC
The bearing arrangement consists of two deep groove ball
bearings lubricated by grease. Bearings are shielded and
greased for life.
Note: MH models have oil lubrication as standard.
Oil lubrication Option L1
Max. Pump temperature 160oC
The use of oil as a bearing lubricant is available as an option.
Constant level oiler is provided to ensure optimum oil level is
maintained.
Shaft Seal
The shaft sealing is carried out by means of gland packing or
by mechanical seal.
The standard mechanical seal is a single, unbalanced, elastomer bellows seal. The seal is self-aligning and automatic
adjustment compensates for abnormal shaft end play, runout
and primary seal wear. The mechanical drive eliminates overstressing of the elastomer bellows and the single coil spring
is not affected by a build up of solids. The seal can be replaced in the field to minimise downtime.
Seal operating temperature 30oC to +105oC.
Seal Materials:
Seal O Ring
Seal Face
Bellows
Retainer
Drive Band
Spring Holder
Spring Holder
Seat
Std.
Nitrile
Carbon
Nitrile
Hard Faces
High Pressure
Option M3
Option M1
Nitrile
Nitrile
Silicon Carbide
Carbon
Nitrile
Nitrile
316
316
316
Ceramic
Silicon Carbide
Ceramic
Where belt drives are necessary a separate jack (intermediate) shaft with bearings to carry the belt loads may be required.
All drive systems, where supplied by KSB Ajax, are appropriately protected by suitable guards.
Baseplate
Baseplates for electronic drives are available in a variety of
styles.
Standard:
Fixed and grouted directly to the foundation.
Anti vibration: Rigid baseplate on rubber mounts.
Rigid baseplate on spring mounts.
Rigid baseplate with inertia block and spring
mounts.
Pump Selection
For pump selection the hydraulic performance curves should
be used. These curves are based on water at 15oC and SG
equal to 1.0.
NPSH values are indicated on the performance curves. At
least 0.5m must be added as a safety margin.
To overcome variations between actual and design system
requirements it is recommended that the driver power exceeds the absorbed pump shaft power:
Absorbed Pump
Shaft kW
Up to 1.5
Up to 12
Above 12
Driver Power
Reserve
Approx. 30%
Approx. 20%
Approx. 10%
Peripheral Speed
After determining the pump operating speed and checking its
maximum discharge pressure, the impeller material must
be checked to ensure that it is suitable with regards to its
peripheral speed, observing the following limits.
- Cast Iron
- to 40 m/sec.
- Zinc Free Bronze
- to 60 m/sec.
* Peripheral speed of 250mm diameter impellers at 3000
rpm is 39/sec.
Painting
KSB Ajax standard red oxide undercoat and one coat of
industrial enamel finish coat.
Mega
Mechanical Seal Suction Pressure Limits At Various Speeds
S haft S ize
1450 rpm
1750 rpm
2900 rpm
3500 rpm
A30
Std.
A40
Opt. M1
Std.
A50
Opt. M1
Std.
Std.
Opt. M1
16 bar
10 bar
16 bar
10 bar
16 bar
10 bar
16 bar
16 bar
10 bar
16 bar
10 bar
16 bar
10 bar
14 bar
10 bar
16 bar
10 bar
16 bar
10 bar
12 bar
800kPa
800kPa
800kPa
800kPa
600kPa
600kPa
8 bar
8 bar
8 bar
8 bar
6 bar
6 bar
A60
Opt. M1
kgm 2
rpm
Max. Dia.
mm
Min Dia.
mm
Width
mm
No. of Vanes
mm
Eye Dia.
mm
Front Seal Dia. mm
Rear Seal Dia. mm
Axial Thrust
Balance
Max. Suction
Max. Discharge
Max. Test
Min/Max. with
o
C
Packing
Min/Max. with
o
C
Mech. Seal
Min/Max.
Rate of Flow
Rotation
Corrosion
mm
Allowance
Flanges
Bearings
Lubrication
Maxim um (1)
kW/rpm
Drive Rating (2)
Shaft Deflection
mm
Sleeve O D
mm
Chamber I D
mm
Packing
mm
Depth
mm
Net Weight
kg
WR 2 with water
Maxim um Speed
Units
M32-160
0.0238
44
209
173
9
6
68
80
95
38
49
35
55
0.013
0.00743
42
47
219
178
12
6
75
90
95
M40-200
0.0640
174
135
16
6
75
90
95
M50-160
0.0394
6306
174
138
12
6
70
85
95
34
209
178
6
6
56
70
95
M32-200
0.0786
176
148
5.6
6
56
70
95
M50-200
0.0750
A30
3500
73
10 X 10
73
72 70 81
(10 bar)
(16 bar)
(24 bar)
3.3
-30 to 160
-10 to 105
1000 kPa
1600 kPa
2400 kPa
332
280
23
6
142
160
155
M50-315
0.4800 3100
265
216
27
6
145
160
180
M65-250
0.2232 3500
404
330
13
6
123
150
180
M80-200
0.1568 3400
332
281
18
6
115
135
155
M80-250
0.2904 3000
320
270
13
6
101
120
155
M100-160
0.1040 3500
219
179
32
6
142
160
155
M100-200
0.1800 2900
185
155
36
6
142
160
155
M65-315
0.5120 3100
266
220
19
6
115
135
140
M80-315
0.5698 2950
219
180
23
6
115
135
155
M80-400
1.2788 2450
260
220
13
6
98
120
140
M100-250
0.3172 2950
320
270
9
6
87
110
105
218
162
40
6
159
180
180
404
329
17
6
140
160
180
6312
328
264
39
6
192
210
180
70
95
417
330
25
6
162
180
180
60
85
0.097
0.074
30310
265
218
37
6
162
180
155
332
280
30
6
162
180
155
A50HD
404
329
17
6
140
160
180
M150-400
1.8600 1650
332
280
23
6
142
160
155
MH100-315
0.6100 2950
413
329
33
6
192
210
180
0.116
0.0584
265
220
48
6
192
210
180
MH100-400
1.3832 2450
A60
MH125-315
0.7740 2500
ps=Suction Pressure
pr=Differential Pressure
Pm=Maximum Pressure
Q=Actual pump flow rate
Q opt=Pump flow rate at best effeciency rate
(2)
(1)
Shaft Material
Impeller Material
Shaft Material
Impeller Material
AS 2837-Gr.431
AS 1830-Gr.T260
AS 2837-Gr.431
AS 1565-C90250
12.5 X 12.5
90.5
92 106 105 108 126 132 162 132 142 178 136 157 156 193 183 192 254 280 142 178 157 156 193
218
158
60
5
180
200
180
M125-200
0.2230 3300
419
330
25
6
162
180
180
M125-250
0.4100 2550
332
280
30
6
162
180
155
M125-315
0.7740 2050
265
218
37
6
162
180
180
M125-400
1.6912 1800
A50
M150-200
0.2918 2530
333
278
9
6
72
85
105
M100-315
0.6100 2600
89 104 108 89
172
122
31
6
124
135
115
M40-250
0.1880
219
180
17
6
93
110
115
M50-250
0.1920
172
131
21
6
92
110
115
M65-160
0.0521
260
220
12
5
80
90
80
M65-200
0.0985
260
214
8
5
70
85
80
M80-160
0.0641
Pm=ps+pr (Q=O)
68
260
212
8
5
58
70
80
A40
M150-250
0.4656 2500
Pump Size
M40-160
0.0336
M32-250
0.1820
M40-315
0.4396
M100-400
1.3832 2450
M150-315
0.8680 2150
MH125-250
0.4100 2900
Tech. Data
Bearing Bracket
Impeller
Pressure
Temp.
Stuffing Box
MH125-400
1.6912 2900
Technical Data
Mega
Mega
NOTE:
BEARING COVERS ITEM
360 ROTATED 90O FOR
CLARITY
ITEM 902, 920, 901.1,
901.2, 901.3, 901.4, 554.1
& 452 ALSO ROTATED
FOR CLARITY
ITEM
DESCRIPTION
QTY
102
163
165
183
210
321
330
360
400.1
400.2
400.3
400.4
400.5
411.1
411.2
411.3
411.4
412.2
412.3
412.4
421
433
452
458
461
471
502.1
502.2
507
524
525
554.1
554.2
554.3
565
901.2
901.4
901.5
901.6
901.7
902
903.1
903.2
903.3
903.4
920
940.1
940.2
970
Casing
Discharge Cover
Cooling Cover
Bracket Support
Shaft
Bearing
Bearing Bracket
Bearing Cover
Gasket, Sft Slv
Gasket, Casing
Gasket, Brg Cover
Gasket, Imp Washer
Gasket, Seal Plate
Gasket, plug (1)
Gasket plug (1)
Gasket plug (1)
Gasket plug (1)
O Ring, Imp. Bolt
O Ring, Cooling Cover
O Ring, Cooling Cover
Lip Seal
Mechanical Seal
Gland, Split
Lantern Ring
Packing
Seal Plate
Wear ring, Casing
Wear ring, Impeller
Slinger
Shaft Sleeve
Spring Sleeve
Washer, Csg Setscrew
Impeller Washer
Washer, Sup Foot
Drive Screw
Setscrew, Casing
Setscrew, B/c & Hsg
Setscrew, Brg Cvr
Setscrew, Foot
Setscrew, Impeller
Stud, Gland
Plug, Cgs/Suct
Plug, Csg/Disch
Plug, Drain
Plug, Stfg/Box
Nut, Gland
Key, Impeller
Key, Coupling
Nameplate
1
1
1
1
1
2
1
2
1
1
2
1
1
1
1
1
1
1
1
1
2
1
1
1
1 set
1
1
1
1
1
1
(4)
1
1
14
(4)
(5)
8
1
1
2
1
1
1
2
2
1
1
1
MATERIAL COMBINATION
G (03, 06)
GB (04, 07)
Cast Iron AS 1830-T260
Cast Iron AS 1830-T260
Cast Iron AS 1830-T260
Cast Iron AS 1830-T260
Cast Iron
Cast Iron
Steel
Steel
St. St AS2837-410
St. St AS2837-410
Steel
Steel
Cast Iron
Cast Iron
Cast Iron
Cast Iron
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
Kevlar-NBR
NBR
NBR
NBR
NBR
NBR
NBR
NBR
NBR
Ceramic/Carbon (2)
Ceramic/Carbon (2)
Cast Iron
Cast Iron
Cast Iron
Cast Iron
PTFE Packing
PTFE Packing
Cast Iron
Cast Iron
Cast Iron
Cast Iron (3)
Cast Iron
Bronze
NBR
NBR
St. St AS2837-316
St. St AS2837-316
St. St
St. St
Steel
Steel
St. St AS2837-316
St. St AS2837-316
Steel
Steel
St. St
St. St
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
St. St AS2837-316
St. St AS2837-316
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
St. St
St. St
NOTES:
1 Plug gaskets not fitted where taper
plugs are installed
2 Option - silicon carbide / silicon
carbide
3 Option - bronze
4 Quantity:
8 off sizes: M32-200, M40-200,
M50-200, M65-200, M80-200,
M100-160, M100-200
10 off sizes: M32-250, M40-250,
M50-250, M80-250, M100-250,
M125-250, M150-250
12 off sizes: M40-315, M50-315,
M65-315, M80-315, M100-315,
M125-315
16 off sizes: M80-400, M100-400,
M125-400, M150-400
5 Quantity:
6 off bearing bracket A30, A40/R
8 off bearing bracket A50, A60
Mega
Sealing Arrangements
Option
Code
Packing
Application
Standard
Clean, non aggressive liquids, temperature up to
105oC internal sealing
S21
S22
S4
Water applications where the suction pressure
exceeds 300kPa (3 bar)
10E
10S
Mega
Sealing Arrangements
Option
Code
Standard
Mechanical Seal
Application
M3
M1
ps+pr
+ 100) kPa
2
ps = suction pressure
pr = differential pressure
S3
Any of the above mechanical seals with seal flush
arrangement in accordance with API plan 11.
S1
Mega
Dimensions
PUMP
SIZE
M 32-160
M 32-200
M 32-250
FLA NGE
P UM P
DN1 DN2 a
f
h1 h2 b1 b2
b
50
32
80 385 132 160 111 120 50
50
32
80 385 160 180 125 135 50
50
32 100 500 180 225 162 171 65
g1 g2 i1 m1 m 2
15 8 42 100 70
15 8 43 100 70
18 8 39 125 95
FOOT
m3 n1 n2 n3 n4 s1
65 240 190 155 110 14
65 240 190 155 110 14
65 320 250 155 110 14
S HAFT
s2
v
w
d
l
14 100 285 24 50
14 100 285 24 50
14 130 370 32 80
END W T.
x
kg
100 34
100 44
100 68
M 40-160
M 40-200
M 40-250
M 40-315
65
65
65
65
40
40
40
40
80
100
100
125
385
385
500
500
132
160
180
200
160
180
225
250
114
135
163
189
128
148
174
199
50
50
65
65
15 8
15 8
18 8
18 12
42
43
39
39
100
100
125
125
70
70
95
95
65
65
65
65
240
265
320
345
190
212
250
280
155
155
155
155
110
110
110
110
14
14
14
14
14
14
14
14
100
100
130
130
285
285
370
370
24
24
32
32
50
50
80
80
100 38
100 49
100 73
100 104
M 50-160
M 50-200
M 50-250
M 50-315
80
80
80
80
50
50
50
50
100
100
125
125
385
385
500
500
160
160
180
225
180
200
225
280
124
143
165
197
144
161
181
212
50
50
65
65
15 8
15 8
18 8
18 12
43
43
39
42
100
100
125
125
70
70
95
95
65
65
65
65
265
265
320
345
212
212
250
280
155
155
155
155
110
110
110
110
14
14
14
14
14
14
14
14
100
100
130
130
285
285
370
370
24
24
32
32
50
50
80
80
100 42
100 47
100 72
100 108
M 65-160
M 65-200
M 65-250
M 65-315
100
100
100
100
65
65
65
65
100
100
125
125
500
500
500
530
160
180
200
225
200
225
250
280
127
151
177
206
155
174
197
226
65
65
80
80
18 8 39
18 8 43
19 12 40
19 12 39
125 95
125 95
160 120
160 120
65
65
65
65
280
320
360
400
212
250
280
315
155
155
155
155
110
110
110
110
14
14
18
18
14
14
14
14
130
130
130
160
370
370
370
370
32 80
32 80
32 80
42 110
100 70
100 81
100 89
140 126
M 80-160
M 80-200
M 80-250
M 80-315
M 80-400
125
125
125
125
125
80
80
80
80
80
125
125
125
125
125
500
500
500
530
530
180
180
225
250
280
225
250
280
315
355
134
154
181
217
255
170
183
206
241
278
65
65
80
80
80
18 8 39 125 95
18 8 39 125 95
19 12 42 160 120
19 12 39 160 120
19 12 39 160 120
65
65
65
65
65
320
345
400
400
435
250
280
315
315
355
155
155
155
155
155
110
110
110
110
110
14
14
18
18
18
14
14
14
14
14
130
130
130
160
130
370
370
370
370
370
32 80 140 89
32 80 140 92
32 80 140 106
42 110 140 132
42 110 140 162
M100-160
M100-200
M100-250
M100-315
M100-400
125
125
125
125
125
100
100
100
100
100
125
125
140
140
140
500
500
530
530
530
200
200
225
250
280
280
280
280
315
355
176
168
183
223
254
222
207
214
252
282
80
80
80
80
100
19
18
20
18
20
12
12
12
12
12
40
40
39
39
39
160
160
160
160
200
120
120
120
120
150
65
65
65
65
65
360
360
400
400
500
280
280
315
315
400
155
155
155
155
155
110
110
110
110
110
18
18
18
18
22
14
14
14
14
14
130
130
160
160
160
370
370
370
370
370
32 80 140 105
32 80 140 108
42 110 140 132
42 110 140 142
42 110 140 178
M125-200
M125-250
M125-315
M125-400
150
150
150
150
125
125
125
125
140
140
140
140
530
530
530
530
250
250
280
315
315
355
355
400
181
223
231
275
235
271
271
307
80
80
100
100
20
18
20
20
12
12
12
12
39
39
39
39
160
160
200
200
120
120
150
150
65
65
65
65
400
400
500
500
315
315
400
400
155
155
155
155
110
110
110
110
18
18
22
22
14
14
14
14
160
160
160
160
370
370
370
370
42
42
42
42
110
110
110
110
140
140
140
140
136
157
156
193
M150-200
M150-250
M150-315
M150-400
200
200
200
200
150
150
150
150
160
160
160
160
530
530
670
670
280
280
315
315
400
375
400
450
230
228
253
284
305
302
301
326
100
100
100
100
20
20
20
20
12
12
15
15
39
39
38
38
200
200
200
200
150
150
150
150
65
65
68
68
550
500
550
550
450
400
450
450
155
155
210
210
110
110
140
140
22
22
22
22
14
14
20
20
160
160
170
170
370
370
500
500
42
42
48
48
110
110
110
110
180
180
180
180
183
192
254
280
MH100-315
MH100-400
MH125-250
MH125-315
MH125-400
125
125
150
150
150
100
100
125
125
125
140
140
140
140
140
530
530
530
530
530
250
280
250
280
315
315
355
355
355
400
223
254
223
231
275
252
282
271
271
307
80
100
80
100
100
18
20
18
20
20
12
12
12
12
12
39
39
39
39
39
160
200
160
200
200
120
150
120
150
150
65
65
65
65
65
400
500
400
500
500
315
400
315
400
400
155
155
155
155
155
110
110
110
110
110
18
22
18
22
22
14
14
14
14
14
160
160
160
160
160
370
370
370
370
370
42
42
42
42
42
110
110
110
110
110
140
140
140
140
140
142
178
157
156
193
9
Mega
Flange Dimensions
B RA NCH FLA NG E
S IZE
D
b
RA IS E D
FA CE
DRILLING *
B OLTING
d1
No.
d2
32
140
18
78
18
100
M 16
40
150
18
88
18
110
M 16
50
165
20
102
18
125
M 16
65
185
20
122
18
145
M 16
80
200
22
138
18
160
M 16
100
220
24
158
18
180
M 16
125
250
26
188
18
210
M 16
150
285
26
212
22
240
M 20
200
340
30
268
12
22
295
M 20
FLANGE DIMENSIONS AND DRILLING ACCORDING TO AS/NZS 4331.2, ISO 7005 - 2 - 16 BAR
(DIN 2533 / PN16)
*HOLES - EQUALLY SPACED OFF CENTRE
OPTIONS: FLANGE DRILLING ACCORDING TO AS129 TABLE E, ANSI B16-1 125lB
Shaft Dimensions
COUPLING END
SHAFT
DIAMETER
TOL.
MODULE
j6
A30
24
-0.004
SEAT
DEPTH
40
20
70
10
27
100
12
37
100
14
42.5
+0.009
A40
32
-0.005
+0.011
A50
42
-0.005
+0.011
A60
48
-0.005
+0.011
10
Mega
Service Connections
CODE DESCRIPTION
CONN. A-30
A-40
A-50
A-60
1M1
Pressure Gauge
BSP
3/8"
3/8"
1/2"
1/2"
1M2
Pressure Gauge
BSP
3/8"
3/8"
1/2"
1/2"
3M
Pressure Gauge
BSP
3/8"
3/8"
1/2"
1/2"
6D
Drain - Casing
BSP
3/8"
3/8"
1/2"
1/2"
8D
BSP
1/2"
1/2"
3/4"
3/4"
7E
Cooling Inlet
BSP
1/2"
1/2"
1/2"
1/2"
7S
Cooling Outlet
BSP
1/2"
1/2"
1/2"
1/2"
10E
External Sealing In
BSP
1/2"
1/2"
1/2"
1/2"
10S
BSP
1/2"
1/2"
1/2"
1/2"
13E
Oil Filling
BSP
1/2"
1/2"
1/2"
1/2"
13D
Oil Drain
BSP
1/4"
1/4"
1/4"
1/4"
Bearing
Bearing Bracket
Bearing Cover
Gasket
Gasket
Gasket
Gasket
O-Ring
Seal Ring
Gland
Lantern Ring
Packing
Wear Ring
Slinger
Impeller Nut
Key
Key
321
330
360
400.1
400.2
400.3
400.4
412.1
421
452
458
461
502.1
502.2
507
524
922
940.1
940.2
2
3
2
3
3
3
4
4
4
5
4
4
6
7
6
4
7
6
6
10
8
9
10
8
9
8
8
9
11
9
9
12
12
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
3
4
6
7
9
10
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
2
3
4
4
1
2
4
5
5
7
2
5
6
7
7
8
8
6
7
9
8
8
8
10
10
10
10
11
12
12
12
13
13
13
13
13
13
3
3
3
15
15
15
14
14
16
18
16
18
18
17
17
10
10
17
10
10
10
17
10
10
10
10
10
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
4
4
Wear Ring
Impeller
230
1
2
1
2
1
2
3
3
3
4
5
4
8
8
7
6
7
6
6
11
11
12
10
11
12
9
10
11
12
9
10
13
14
Back Cover
4
6
8
9
11
12
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Casing
Shaft
A 60
210
A 50
Support Foot
A 40
183
A 30
163
32-160
32-200
40-160
40-200
50-160
50-200
32-250
40-250
50-250
65-160
65-200
80-160
40-315
50-315
65-250
80-200
80-250
100-160
100-200
65-315
80-315
80-400
100-250
100-315
100-400
125-200
125-250
125-315
125-400
150-200
150-250
150-315
150-400
102
Shaft Unit
P um p
Interchangeability of Components
11
Mega
Queensland
Carberry St,
Ebbw Vale, 4304
Tel: +61 (07) 3282 1766
Fax: +61 (07) 3816 0225
South Australia
Unit 4, 348 Richmond Rd,
Netley, 5037
Tel: +61 (08) 8234 0066
Fax: +61 (08) 8443 5411
Western Australia
Unit 2, 86 Catalano Circuit,
Canning Vale, 6155
Tel: +61 (08) 9455 7900
Fax: +61 (08) 9455 7800
New Zealand
Unit 2, 5 Civil Place,
Albany, Auckland
Tel: +64 (09) 476 4047
Fax: +64 (09) 476 4048
ksbvicsales@ksbajax.com.au
ksbnswsales@ksbajax.com.au
ksbqldsales@ksbajax.com.au
ksbsasales@ksbajax.com.au
ksbwasales@ksbajax.com.au
pumps@ksbajax.co.nz
WEBSITE: www.ksbajax.com.au
Due to our policy of constant research and development, product specification may change without notice.