Professional Documents
Culture Documents
Electrical
Electrical
Electrical
5 58 16 8 0 -3 -6 6 18 58 16 8 -5 -3 -6 6
TLFE OL RE
ONLNECOM I .
H 3 CONTENTS 4 L
ELECTRICAL PARTS & ACCESSORIES INCLUDING HEADLIGHT & TAILLIGHT BRACKETS, LICENSE PLATE HOLDERS, & HORNS.
1/1
H 3 CONTENTS 4 L
A. THUNDERVOLT BATTERIES
Maintenance-free 12V motorcycle batteries featuring gas recombination technology. These 20 amp hour batteries have 270 cold cranking amps producing a high rate of discharge current, giving consistent starting and excellent reserve capacity. SOLD EACH
1-110 PART NO. APPLICATION / YEARS OEM NO. JIS NO. VOLTS
AMP HOURS
LENGTH
WIDTH
HEIGHT
ASSY
+
STANDARD BATTERIES
1-97 1-33 1-76 1-67 1-98 1-71 FL & FLH models 1965/1984. Sportster models electric start 1967/1978, except XLCR. FX & XL models (kickstart only) 1970/1978. FX models (electric start) 1973 & later. FXR models 1982 & later. Softail models 1984/1990. Sportster 1979/1996. XLCR 1977 & 1978. FLT, FLHT & FLHR models 1980/1996. All Softail & Dyna models 1991/1996. Custom 12V; use with early 6V style tanks. 66007-84 66006-70 65991-75C 66010-82 65989-90A YHD-12 12N7-4A YB16-B Y50-N18L-A YB16HL-A-LM 12N5.5A-3B
12
12 12
12 12 12
260 255 60
20 19 5.5
3-9/16 4 3-9/16
1-58
Softail 1984 thru 1990. Electric start FX & FXR, 1973 thru 1994. XL 1979 thru 1996. All Softail & FXD models 1997 & later. XL models 883 & 1200 1997 & later. Buell S3, S3T Thunderbolt models 1997 & later. Buell X1 Lightning models 1999. Buell M2 Cyclone models 1997 & later. FX models (electric start) 1971 & later. FXD models 1991/1996 NOTE 1. All Softail models 1984/1990. XL models 1979/1996. Buell models 1987/1996. Custom application. This is a very small battery; excellent for use where space or height is an issue. See example photo above. FLH & FLHT models 1997 & later. XL & XLH (Sportster) models 2004 & later.
65991-82A
YB-16-B-LM
12
240
19
6-7/8
6-1/8
MAINTENANCE-FREE BATTERIES
1-55 65989-97 YTX20L-BS
12 270 18 6-7/8 3-7/16 6-1/8
+
12
270
18
6-7/8
3-7/16
6-1/8
+ -
12
230
11
3-7/16
4-3/8
+ -
12 12
335 200
30 12
6-9/16 6
5 3.4375
6-7/8 5.75
NOTE 1: Requires use of below battery installation kit for Dyna Glide models 1991 thru 1996.
1/2
H 3 CONTENTS 4 L
A. THUNDERVOLT AGM BATTERIES
Ultimas AGM Thundervolt batteries are the highest performance batteries we offer today! These are an industry first, with a direct fit aftermarket replacement for OEM# 65989-97A. These batteries provide some of the highest power ratings available in the Aftermarket. FEATURES: A Patented post design reduces internal battery resistance by replacing 3 internal connections with 1. Flush mount, threaded terminals allow for easy connection to bike terminals. Nonspillable, sealed AGM Valve Regulated Lead Acid (VRLA) design is maintenance free and meets all requirements for shipment via air carrier. Rugged construction has been lab tested and field tested to ensure long life, even in demanding V-Twin applications. Higher AH capacity than OEM means more starting capacity before wearing battery down, particulararly useful for those stubborn steeds. Manufactured by an ISO 9001:2000 registered factory Patented Cast-On-Stip (COS) manufacturing technology ensures consistent long battery life. Ultima OEM Part No. Part No. Applications 1-140 65989-97B Softail 1997/later, XL 1997/2003, Dyna 1997/later, VROD (except VRSCR) 2007/later 1-141 66007-84 FL & FLH models 1965/1984. Sportster models electric start 1967/1978, except XLCR. 1-142 66010-97B FLH, FLT 1997/later 1-143 65958-04 XL models 2004 1-144 65989-90B Dyna & Softail models 1991/1996 1-145 65991-82B Electric start FX and FXR 1973/1994; XLCR 1977/1978, XL models 1979/1996; Softail models 1984/1990; FXR models 1999/2000 1-146 66010-82B FLHR, FLHT, and FLT Touring models 1980/1996 1-147 65948-00 VRSC models 2002/2006, VRSCR 2007 1-148 66006-70 FX & XL models (kickstart only) 1970/1978. 1-150 V-Twin Terminals. Replacement terminals & screw for above battery. Except 1-148 & 1-141.
1-140
1-151
1-155
1-152
1-154
1/3
H 3 CONTENTS 4 L
A. BATTERY TENDER
Battery Tender Plus is a 1.25 amp battery charger without the damaging effects of a trickle charger. Includes quick-connect harness for hard-to-reach areas. Requires 115 VAC. 1-105 Battery Tender Plus; 12V @ 1.25A. SOLD EACH
1-105
Battery Tender Junior is perfect for all lead acid, sealed maintenance free and gel cell batteries. Includes quick-connect harness for hard-toreach areas. Requires 115 VAC. 1-104 Battery Tender Junior; 12V @ 750 mA. SOLD EACH
The answer to starting that bike with a dead battery & no kick starter. This set of heavy duty cables measures over 5 feet long and is still compact enough to carry with you. 97-5 Jumper cables. SOLD EACH
C
78-3
D
CHROME PLATED
Complete support bracket with grommet. 14-25 For XLH 1967 thru 1978. Replaces OEM 66480-67 and OEM 11422.
SOLD EACH
H
CHROME PLATED
1/4
H 3 CONTENTS 4 L
A. BATTERY ACID CATCH TANKS
Protects chrome and paint from battery acid discharged from the vent tube. Easy to install on any model. Several types to choose from. Economical plastic catch tank with tie wraps for mounting and vent tube. 1-15 Battery acid catch tank. SOLD EACH
1
A
89-3
14-31
89-36
5-72
CHROME PLATED
CHROME PLATED
E
CHROME PLATED RIBBED
1/5
H 3 CONTENTS 4 L
A
CHROME PLATED HEAVY GAUGE STEEL
89-181
89-120
C. ELECTRIC CABLES
89-119 89-230
POSITIVE BATTERY CABLES SOLD EACH 18-106 Battery positive terminal cable for Super Glide, all models 1971 thru 1981. Measures center to center 16-34. Cable end holes are 38 & 516. OEM 70069-65A. 18-107 Battery positive terminal cable for Sportster 1975 thru 1977. Measures center to center 13. Cable end holes are 38 & 516. OEM 70097-75. NEGATIVE BATTERY GROUND STRAP/CABLE 18-109 Ground strap for electric start Sportster 1968 thru 1977. Measures center to center 9-18. Strap end holes on both ends are 516. OEM 70235-67. 18-108 Ground cable for FL & FLH, 1965 thru 1978. Measures center to center 9-14. Cable end holes are 38 & 516. OEM 70209-65. SOLD EACH
14-21 14-23
D. BATTERY STRAPS
Part No. 5-129 & 5-220 are made of black rubber. The other straps are manufactured to meet or exceed H-D specifications from 18 gauge stainless steel with plated eye bolts to prevent rust. 5-30 1967 Thru 1978 XLH & Sportster. OEM 66470-67.
C
18-109
SOLD EACH
18-106
1970 And later FLH, FL & H-D 74. OEM 66383-70. 1970 And later XLCH & FX. OEM 66470-70. 1973 And later all FX, electric start and 883cc, 1100cc & 1200cc Evolution. OEM 66476-73. 5-129* 1984/1991 FXST & FLT and 1979 Sportster. OEM 66105-77. 5-220* 1992/1999 Softail. 2 Piece. OEM 66109-93 & 66111-93. *Part No. 5-129 & 5-220 are interchangeable.
5-129 5-31
5-30
5-220
1/6
H 3 CONTENTS 4 L
R YOU ROM Y WITH TF MOS TER THE ND BAT ET G RA S RTE STA A CABLE IM ULT
ALL FLH & FLT DRESSER MODELS 18-701 18-731 1965 / 1979 18-702 18-732 1980 / 1988 18-703 18-733 1989 / 1992 18-704 18-734 1993 -LATER ALL FXST & FLST SOFTAIL 18-705 18-735 1984 / 1988 18-706 18-736 1989 / 2001 18-707 18-737 1989 - LATER ALL FXR LOW RIDER 18-708 18-738 1982 / 1988 18-709 18-739 1989 - LATER ALL FXD DYNA 18-710 18-740 1991 / 2002 18-711 18-741 2003 - LATER ALL SPORTSTER 18-712 18-742 1981 - LATER
18-728 18-758
C. SHOP PAKS
Includes 1 of each cable above. 18-199 Clear SOLD AS PKG. 18-198 Smoke
1/7
H 3 CONTENTS 4 L
1
A
11-34 Cable. Used as positive battery cable on FXST models. 18-257 Replaces OEM 70078-91. SOLD AS PKG. OF 6 Heavy duty kits for late models. 18-470 For Softail 1989 thru 2003; 10 & 12. 18-471 For Dyna 1991 thru 2003; 10 & 15. 18-472 For FXR 1989 thru 2003; 12 & 16. 18-473 For FLT 1992 thru 2003; 13 & 14. 18-474 For XL 1981 thru 2003; 11 & 16.
Sumax Extreme Duty cables are a very flexible 2 gauge 180amp rated copper core, with closed barrel style terminals (1/4 & 1/16 eyelets) made of tinned copper insulated by black heat shrink sleeves. These very fat and very flexible cables will transfer more cranking power with less voltage drop than any other cable on the market. They are designed to work with all your big horsepower motors on the market today. 100% Made in the U.S.A. 18-475 For Softail 1989 thru 2004; SOLD AS KIT 10 & 12. 18-476 For Dyna 1991 thru 2004; 10 & 15. 18-477 For FXR 1989 thru 1994; 12 & 16. 18-478 For FLT 1993 thru 2004; 13 & 14. 18-479 For XL 1981 thru 2003; 11 & 16.
SOLD AS KIT
STRAIGHT
B. L.E.D. BULBS
Water and vibration proof. Will last up to 100,000 hours. 31 LEDs per bulb. 1-5/8 O.D. NOTE: Dual contact = 1157, single contact = 1156. DESCRIPTION Angled, single contact Angled, dual contact Straight, single contact Straight, dual contact RED LEDS 6-5 6-6 6-3 6-4 AMBER LEDS 6-9 6-10 6-7 6-8
ANGLED
SOLD EACH
1/8
H 3 CONTENTS 4 L
A. WEDGE MOUNT LED BULBS
Stock style wedge mount bulbs for late 2003 applications. 6-68 3156 Wedge mount single element. SOLD EACH 6-69 3157 Wedge mount dual element. Custom wedge mount bulbs. SOLD EACH 6-112 Wedge mount single element Amber. 6-113 Wedge mount dual element Red. 6-114 Wedge mount dual element Amber.
6-68
1
6-114
E
6-101,6-102 19 PIECE
E. LED BULBS
PART NO. 6-101 6-102 6-103 6-104 NO. OF PIECES COLOR 19 19 19 19 Red Amber Red Amber FILAMENT Dual Dual Single Single REPLACES 1157 1157 1156 1156
TRI BAR
SOLD EACH
F. INDICATOR LAMPS
These 3/8 diameter one-piece indicator lights are perfect for custom or stock applications. Theyre used on many 1984 thru 1993 models. 6 Long leads with wiring pins. 8-157 Red. Replaces OEM 68489-86. SOLD EACH 8-158 Amber. Replaces OEM 67864-86. 8-159 Green. Replaces OEM 68574-86. 8-160 Blue. Replaces OEM 67862-86. 8-161 Replacement clip. OEM 68608-83.
G. REPLACEMENT HEADLAMPS
Replacement headlamps, H4 55/60W bulb included, available with or without tri bar. 4-1/2 DIAMETER 8-436 Lamp unit, tri bar. 8-437 Lamp unit, plain. 5-3/4 DIAMETER 8-438 Lamp unit, tri bar. 8-439 Lamp unit, plain.
SOLD EACH
SOLD EACH
1/9
H 3 CONTENTS 4 L
25.5
25.5
45
45
18.5
STOCK BULBS
AMERICAN 6-11 A4813/1154 6-54 A62 B D D A B B B B B B B B B B B 6V 183W 6V 3W 12V 3W 12V 12V 186W 6V 183W 12V 186W 6V 183W 12V 186W 6V 183W 12V 186W 6V 183W 12V 186W 6V 183W 12V 18/6W Taillight. Instrument light Hi-Lo. Instrument light Hi-Lo. Turn signal. All taillights. Taillight. Taillight. Taillight. Taillight. Taillight. Taillight. Taillight. Taillight. Taillight. Taillight. H-D No. 68165-47 H-D No. 68462-49 H-D No. 68462-64 H-D No. 68572-64A H-D No. 68165-64 6V models. 12V models. 6V models. 12V models. 6V models. 12V models. 6V models. 12V models. 6V models. 12V models.
12
35
6-55
A72
21.5
F G
5" MOL
6-40 1156 6-43 GE1034 / 1157 ENGLISH 6-11 A4813 6-43 GE1034 / 1157 HONDA 6-11 A4813 6-43 GE1034 / 1157 KAWASAKI 6-11 A4813 6-43 GE1034 / 1157 SUZUKI 6-11 A4813 6-43 GE1034 / 1157 YAMAHA 6-11 A4813 6-43 GE1034 / 1157
CUSTOM BULBS
4" MOL
7.031" MAX.
5.700" MAX.
B B E F G G G C D
6V 18/3W 12V 18/6W 12V 2W 12V 55W 6V 60/55W 12V 60/55W 12V 100/55W 12V 15W 12V 3W
All taillights. All taillights. VDO instruments. Quartz iodide. Quartz iodide. M.W. part No. 7-45 & 7-46 lights. Quartz iodide. M.W. part No. 7-45 & 7-46 lights. Quartz iodide. M.W. part No. 7-45 & 7-46 lights. King marker. M.W. part No. 8-80 lights. Queen marker. M.W. part No. 8-82 & 8-83 lights.
1/10
H 3 CONTENTS 4 L
A. ULTIMA HALO L.E.D. REPLACEMENT
HEADLAMP
Light it up with these all new Ultima L.E.D. headlamps. We have combined an L.E.D. halo with a halogen bulb wired seperately so as not to interfere with everyday highway usage. Just flip the switch at the next parade or bike show & you have instant crowd gathering illumination. L.E.D. colors available in Red, White, Blue or Amber. 5-3/4 diameters, H4 55/60 W. DOT approved. SOLD EACH 5-3/4" HEADLAMPS (LAMP ONLY) W/TRI-BAR 8-440 Ultima L.E.D. headlamp, red. 8-441 Ultima L.E.D. headlamp, clear/white. 8-442 Ultima L.E.D. headlamp, blue. 8-443 Ultima L.E.D. headlamp, amber.
1
A
8-336
SOLD EACH
E
8-339 8-340
E. CHROME HEADLIGHTS
Chromed aluminum headlights are w/o tri-bar, 3-1/2 in dia, 5-1/2 long, 12V H4-55/60W-hi and low Beam. SOLD EACH 8-339 8-340 Headlight w/visor. Headlight w/o visor.
F
CHROME PLATED
1/11
H 3 CONTENTS 4 L
8-20
8-331
8-335
8-332
8-21
8-252
8-334
8-333
8-251
1/12
H 3 CONTENTS 4 L
A. V-STYLE SPOTLIGHT BARS
Chrome plated spotlight bars with distinctive V-styling. Check out the V-style rear signal kit on page 1-36. 11-147 Fits FLST 1986 thru 2003. SOLD EACH 11-148 Fits Road King 1994 thru 2003.
1
A
CHROME PLATED
B. SPOTLIGHT BARS
U.S.A. MADE light bars designed for use with National Cycles Heavy Duty windshield series. Light bars are fully assembled and are prewired for easy installation. Includes turn signals. Chrome plated. 11-116 For XL 1987 & later, Dyna 1993 & later, SOLD AS KIT FXR & FXRS 1982 thru 1994, and FXLR 1987 thru 1994. (Narrow Glides). 11-117 For FXDWG 1993 & later, FXWG 1980 thru 1985, FXDG 1983, FXST/I 1984 thru 1990 and 1999 & later, FXSTD/I 2000 & later, FXSTB/I 1999 & later, and FXSTC 1987 thru 1999. Will not fit FXSTF.
CHROME PLATED
C. 5-3/4 HEADLIGHTS
Classically styled 5-3/4 chrome headlights come completely assembled. Includes blue high beam indicator and mounting block. DOT 9809 approved. 12V; includes a 55/60 watt H4 bulb. Brighter is better! 8-195 Bottom mount headlight. SOLD EACH 8-196 Side mount headlight.
D. 7 CHROME HEADLIGHT
Beautifully chromed 7 diameter headlight. OEM style, bottom mount FL style is perfect for restoration or custom FL applications. Includes H4 55/60 watt bulb. No high beam indicator. DOT 9913-A approved. 8-197 7 headlight. SOLD EACH 6-52 Replacement bulb only.
CHROME PLATED
CHROME PLATED
F. CHROME SPOTLIGHT
The below lights with diamond cut reflectors have 35/35 Watt bulb.
SOLD EACH
F
DIAMOND CUT REFLECTOR CHROME PLATED
8-143 8-144
Replacement composite light beam with 30 Watt bulb. Replacement composite light beam with 35/35 Watt bulb.
CHROME PLATED
G
CHROME PLATED
1/13
H 3 CONTENTS 4 L
1
A
CHROME PLATED
B
CHROME PLATED SMOOTH ALL PARTS CHROME PLATED 11-54
Replacement spotlamp housing for OEM 68671-69. Used on 1965 & later Big Twin. Mounts like stock passing light. 8-138 Spotlamp with sealed beam. OEM 68671-69. SOLD EACH 8-95 Spotlamp housing only. Spotlight mounting bracket sets. 11-100 For early FL, 1949 thru 1961. SOLD AS PAIR OEM 68603-49 & 68604-49. 11-54 For late FL, 1961 thru 1984. OEM 68603-62. 11-201 Springer style. For FLST 1984 & later. OEM 58092-87.
D E
CHROME PLATED
F
17-116 39-152
86-58 7-39
E. CONVERSION HEADLIGHTS
Headlight Conversions are exact replacements for sealed beam used on most big bikes. They provide substantially improved lighting with little or no modifying, at a modest cost. A dual filament bulb allows high or low beam operation. Quartz iodide/350,000 candlepower. 7-45* Quartz unit 12V, 7 dia. SOLD EACH 7-46* Quartz unit 12V, 5-34 dia. 6-52 12V Replacement bulb, 60/55W. 6-61 12V Replacement bulb, 100/55W. 6-32 6V Replacement bulb, 60/55W. *For 6V applications order 12V conversion kit and replace bulb with our part No. 6-32 H4 bulb.
39-153
F. HEADLIGHT RELAY
Allows the use of a 1-wire (horn button). type switch to operate high/low beam headlights on 12V systems. Perfect for custom handlebar switch set-up. 17-116 Headlight relay. SOLD EACH 39-152 Headlight relay for 00-03 FLT, 00-09 Dyna & Softail. OEM 31522-00/00B/00C. 39-153 Headlight relay for 05-08 Sportster. OEM 31601-04.
1/14
H 3 CONTENTS 4 L
A. SEALED BEAM HEADLAMPS
Hi-Lo beam indicator light glows when high beam is on. 5.70 Diameter sealed beam. 8-16 12V Bottom mount sealed beam headSOLD EACH lamp. Mounting bolt included. 8-139 12V Bottom mount sealed beam headlamp with halogen motorcycle sealed beam. 86-69 Replacement chrome ring. 7-39 6V Replacement sealed beam. 6-54 6V Replacement indicator bulb. 7-26 12V Sealed beam quartz halogen. 5-34 Dia. Replaces OEM 67698-81B. 6-55 12V Replacement indicator bulb.
1
A
CHROME PLATED BOTTOM MOUNT
8-147
B
CHROME PLATED
86-104
86-103
CHROME PLATED
D. WAVE HEADLIGHTS
Bottom mount headlight has two H3 12V/55 w bulbs. The housings are hand polished and chrome plated. They are ECE approved for high beam and fog lamp. Measures 152mm x 70.4mm x 60.6mm. 8-315 Headlight with Clear lens. SOLD EACH 8-316 Headlight with Blue lens. 8-317 Blue replacement lens. 8-318 Clear replacement lens.
D
CHROME PLATED
CHROME PLATED
1/15
H 3 CONTENTS 4 L
1
A B
7 Bullet style 12V headlamp similar to the early Springer headlamp with high beam indicator light. 8-140 Headlamp with sealed beam. SOLD EACH 7-47 Replacement 12V sealed beam.
11-40
SOLD EACH
E F
CHROME PLATED CHROME PLATED CHROME PLATED
11-108 11-109
11-113
Fits FXWG 1980 thru early 1985 and FXST/C, 1984 & 1985. OEM 67773-80. Fits FXST/C 1986 & later. OEM 67773-80A.
H
CHROME PLATED 11-59 11-113
1/16
H 3 CONTENTS 4 L
A. HEADLIGHT MOUNT FOR HYDRA GLIDE
To mount M.W. part No. 8-77 7 headlight to H-D Big Twin Wide Glide front fork. 11-45 For 1949 thru 1976. OEM 67810-48. SOLD EACH 11-51 For 1977 & later. Fits all FXWG front ends. 4 Center to center mount. 516 Mounting hole.
1
CHROME PLATED
D. HEADLIGHT BRACKETS
11-155 11-156 11-157 11-158 11-159 Mounts headlight to the bottom bolt of the shock absorber on Paughco springers. For Wide Glide triple trees. For FLST with tin covers. 7/8 tall post. For 1993-1999 FXSTS.
SOLD EACH 11-159 11-156
11-155
11-158
E
CHROME PLATED
F
89-107 86-70
G
LEFT 89-257 CHROME PLATED ALUMINUM
1/17
H 3 CONTENTS 4 L
89-426
B
8-4
8-8
L.E.D. TAILLIGHTS LIGHT Why use L.E.D. taillights EMITTING Low current draw very efficient. Does not generate heat. DIODES Two times brighter than a halogen bulb. More vibrant red color. Vibration proof no filament to break away. Life expectancy is 100,000 hours. Flush mount lights are almost invisible when not energized. 8-9 Large tear drop; 4-1/2 x 2 red lens. SOLD EACH
D
8-221 LENS
RED LEDs 60 48 60
WHITE LEDs 3 3 3
BRAKING 6w 4.5w 6w
E
CHROME PLATED
1/18
H 3 CONTENTS 4 L
A. LATE STYLE L.E.D. TAILLAMP
Our new late H-D style taillight features an LED array for those who want the brightest taillight available. 8-193 Fits XL, FX & all Big Twin 1973 SOLD EACH & thru 1999. Replaces OEM 68008-73.
CHROME PLATED
1
B
CHROME PLATED 8-185 CLEAR LENS
C. CATEYE TAILLIGHT
Beautiful oval taillight with large license illumination lens. Flat back for universal mounting. Mounting screws 2 center to center. Will mount on part No. 11-39 taillight mount, but for something special, use on the CHROME HORSE stainless steel side mount part No. 11-120. 8-79 12V Taillight with plain lens. SOLD EACH 8-136 12V Taillight with blue dot lens. 86-71 Red plain lens only. 86-98 Blue dot lens only.
D E
CHROME PLATED CHROME PLATED
CHROME PLATED
G
CHROME PLATED
I. BOLTED TAILLIGHTS
8-245 8-246 Polished body w/brass bolts & ring. Black body w/brass bolts & ring.
SOLD EACH
1/19
H 3 CONTENTS 4 L
A. DRILLED TAILLIGHTS
Custom taillight assy. w/license bracket. 8-216 Drilled taillight, brass. 8-217 Drilled taillight, aluminum. 8-218 Drilled taillight, black. 8-247 Mini Drilled taillight, aluminum.
SOLD EACH
1/20
H 3 CONTENTS 4 L
A. TOMBSTONE TAILLIGHT
Tombstone taillights are available in both standard 12V bulb or with LED array. Both are all metal replica of H-D early style taillight used as original equipment on 1947 thru 1954 models, OEM 68003-47T. Superbly crafted & chromed. Universal fender mounting for most applications. Includes chrome plated license mount, black rubber mounting gasket for paint protection, and either 12V bulb or LED array. 8-56 Complete taillight with 12V bulb. OEM 68003-47. SOLD EACH 8-191 Complete taillight with LED array. 8-6 LED Conversion array ONLY for tombstone taillights. See page 1-20. 86-34 Red replacement lens. OEM 68090-47. NOTE: Taillight not recommended for street use.
CHROME PLATED
A
8-191
CHROME PLATED
E
BRACKETS CHROME PLATED 8-131 CHROME PLATED
F G
CHROME PLATED
H
CHROME PLATED
1/21
H 3 CONTENTS 4 L
A
CHROME PLATED
B
RING CHROME PLATED
U.S.A. MADE license bracket fits SOLD EACH various license back plates, or mount plate directly.
B. BLUE DOTS
Bring back that nostalgic look by customizing any lens with the Blue Dot. Can be installed by drilling hole in lens and is held in place by chrome ring. May not be approved in some states. 86-72 Chrome ring & blue jewel. SOLD EACH
8-255
CHROME PLATED
E
86-42
86-130
86-154
86-133 86-134
F
CHROME PLATED
Chrome plated covers for popular style taillights. 89-390 Die cast skull cover gives a unique touch to SOLD EACH your tombstone taillight. Fits all tombstone taillights. 89-391 Die cast cover with eagle fits all cateye taillights without blue dots. 89-392 Steel cover fits all cateye taillights with or with-out blue dots.
1/22
H 3 CONTENTS 4 L
A. EARLY H-D STYLE TAILLIGHT & LENS
Original style taillight in chrome, with 12V bulb. Fits 1955 thru 1972 Sportster, Big Twin, and many custom applications. 8-59 Chrome plated taillight. OEM 68010-64B. SOLD EACH 8-8 LED Conversion array only for 1955 thru 1972 OEM style taillights. See page 1-20. 11-44 License bracket; 2 hole. OEM 59995-55A. 11-99 License bracket; 3 hole. OEM 59998-75T. 86-41 Red lens only. OEM 68090-69.
CHROME PLATED
11-44
A
8-59
86-86
B
CHROME PLATED CHROME PLATED
CHROME PLATED
8-125
D
CHROME PLATED 8-97
CHROME PLATED
CHROME PLATED
F
CHROME PLATED
1/23
H 3 CONTENTS 4 L
1
A
8-82 CHROME PLATED
Custom marker lights of chrome plated cast alloy. The hooded lens opening & wedge shape make these marker lights stand out. Both King and Queen are 12V. The King is available in single or double filament models, the Queen in single filament only. The point-of-sale display packaging lets the consumer view the light from all angles. KING MARKER 8-93 Red light, dual filament. SOLD EACH 8-94 Amber light, dual filament. 6-57 Replacement bulb; 12V, single filament. Will also work with our bullet lights (at left). 6-58 Replacement bulb; 12V, dual filament. Will also work with our bullet lights (at left). QUEEN MARKER 8-82 Red light, single filament. SOLD EACH 8-83 Amber light, single filament. 6-55 Replacement bulb; 12V, single filament.
E
CHROME PLATED
F
DIAMOND CHROME PLATED BANTAM
1/24
H 3 CONTENTS 4 L
A. CHROME BULLET LIGHTS
Bullet lights add a custom look to choppers or dressers. Single element, 3 length, 1-1/2 from stand off to top, 5/16 mount stud with rubber grommet. BULB BULB LED LED LENS SMOOTH BALL MILL SMOOTH BALL MILL COLOR 8-122 8-303 8-309 8-305 Amber 8-123 8-304 8-311 8-307 Red 8-310 Clear 8-312 Blue
SOLD AS PAIR
A
SMOOTH CHROME PLATED BALL MILL
B
CHROME PLATED
17-125
2-1/4 Diameter x 2-1/2 long, chrome plated, die cast halogen light withSOLD AS PAIR multi-faceted reflector. All lenses use a rubber gasket to seal the unit. NOTE: Not DOT approved for show use only. Clear 50w lights can be used as touring lights. Red lens units can be used as rear turn signals (35w). Amber lens can be used as front turn signals (20w). D REPLACEMENT PARTS 86-116 Lens gasket. SOLD EACH 86-118 Chrome bezel. SOLD EACH
17-132
CHROME PLATED
C. FLASHERS
17-125 12V Rectangular flasher. For XL 1965 & later, FL 1965 thru 1984, FLT 1980 & later, FX 1971 & later and FXR 1982 & later. 12V Rectangular flasher. SOLD EACH LOAD EQUALIZER 17-132 Load equalizer. Used to prevent irregular lighting when small LED turn signals are installed. SOLD EACH
86-120
86-121
86-122
11-205
8-273
1/25
H 3 CONTENTS 4 L
These LED lights feature dual function bright LEDs, a clear lens (ECE approved) and a show chrome quality finish. SOLD AS PAIR FITS XL, FLSTC, FLSTS, FLSTF, FXSTS, FITS 86-95 TOURING 8-356 LED turnsignal, amber. FXD, FXDL, FXDWG 8-366 LED turnsignal, amber. 8-357 LED turnsignal, red. 8-367 LED turnsignal, red. FITS 86-UP FLT/FXRT 8-358 LED turnsignal, amber. W/CLAMP FOR 39MM FORK TUBES 8-362 LED turnsignal, amber. 8-359 LED turnsignal, red. 8-363 LED turnsignal, red. FITS 84-99 SOFTAIL 8-360 LED turnsignal, amber. W/CLAMP FOR 41MM FORK TUBES 8-364 LED turnsignal, amber. 8-361 LED turnsignal, red. 8-365 LED turnsignal, red.
8-342
8-269
8-188
1/26
H 3 CONTENTS 4 L
A. TURN SIGNAL MOUNTING HARDWARE for H-D
These U.S.A. MADE brackets & hardware are available individually and will work with all M.W. H-D style turn signals. 11-78 Bracket to lamp. OEM 68477-73. SOLD EACH 11-79 Rear turn signal support with screw. SOLD EACH OEM 68480-73. 11-98 Rear turn signal support. OEM 68480-93. SOLD EACH Fits Dyna Glide, FXDL & FXDWG, 1993 and later and Sportster 1993 & later. 11-1 Rear turn signal support. OEM 68480-02. SOLD EACH Fits Softail FXSTI, FXSTFI, FLSTSI, FXSTST, and FXSTBI. 11-2 Rear turn signal support. OEM 68821-00. SOLD EACH Fits Softail FXSTD & FXSDI, 2000 & later. 11-80 Handlebar clamp with screw. OEM 68487-82 SOLD EACH & 68486-82A. 11-81 Rear turn signal stud (1-7/8 long), with SOLD AS PAIR nut. OEM 68493-87. 11-82 Rear short stud only (1-14 long). SOLD AS PAIR Moves signal in close for sleeker look. 11-85 Rear short stud only (58 long). SOLD AS PAIR 11-83 Stud with spacer. OEM 68528-77A. SOLD EACH 11-86 Low head socket screw. OEM 4070. SOLD EACH 11-87 14 Chrome spacer. SOLD EACH 11-88 12 Chrome spacer. SOLD EACH 11-89 34 Chrome spacer. SOLD EACH 11-90 1 Chrome spacer. SOLD EACH 11-91 1-14 Chrome spacer. SOLD EACH 11-92 11-3 Chrome spacer assortment. Includes one each of above individual spacers. Directional signal mount kit for front signals for most H-D. OEM 68185-00.
SOLD AS PKG. 11-86 SOLD AS KIT 11-87 THRU 11-91
1
A
11-98
11-1 11-78
11-79
11-2
11-80
11-83
11-3
B
CHROME PLATED
11-103
1/27
H 3 CONTENTS 4 L
1
A
CHROME PLATED
Fits 1974 thru 1984 4 speed FL, 1986 & later Heritage Softail, 1991 & later FLT, FLHT, FLHS, & Road King models. Check out the V-style spotlight mounting bar on page 1-13. 11-202 Chrome V-bracket only. SOLD EACH 8-241 LED Amber marker lights (extra red SOLD AS PAIR lenses included).
A
8-85 86-122 CHROME PLATED 86-89
REPLICA TURN SIGNALS CAN BE USED ON ANY MOTORCYCLE. 8-85 Complete early amber turn signal. OEM 68557-70A. SOLD EACH 8-84 Complete single element early amber turn signal. 8-86 Complete early red turn signal. 86-87 Early amber lens only. OEM 68571-63A.* 86-88 Early red lens only. OEM 68570-63.* 86-93 Early red lens with blue dot installed, only.* 86-121 Early clear lens, for front only.* 8-88 8-87 86-89 86-90 86-94 86-122 Complete late amber turn signal. OEM 68400-86. Complete late red turn signal.* Late amber lens only. OEM 68440-86.* Late red lens only.* Late red lens with blue dot installed, only.* Late clear lens for front only.*
SOLD EACH
*Chris Products
B.
CHROME PLATED
8-107
86-87
FLAT STYLE LENS SINGLE FILAMENT TURN SIGNAL AND RUNNING LIGHTS. 8-107 Complete amber turn signal with threads. SOLD EACH Dual filament. 8-108 Complete amber turn signal light with threads. S ingle filament. 86-87 Amber lens only. OEM 68571-63A. 86-88 Red lens only. OEM 68570-63. 86-93 Red lens with blue dot installed, only. 86-121 Clear lens, for front only.
C.
8-99
CHROME PLATED
86-120
DUAL FILAMENT AMBER TURN SIGNAL UNIT. FITS MOST H-D MODELS, 1986 & LATER. 8-99 Complete amber turn signal without threads. OEM 68404-86. 8-150 Complete red turn signal without threads. 8-200 Complete red turn signal with threads. 86-83 Amber lens only. OEM 68457-86. 86-84 Red lens only. 86-92 Red lens with blue dot installed, only. 86-120 Clear lens, for front only. SOLD EACH
D.
8-71
CHROME PLATED
86-85
AMBER TURN SIGNAL UNIT WITH SINGLE FILAMENT FOR FX, FXR, & XL, 1973 THRU 1985. 8-71 Complete amber turn signal with SOLD EACH threads. OEM 68514-73. 8-101 Complete amber turn signal without threads. OEM 68515-77A. 86-50 Amber lens only. OEM 68483-73. 86-85 Red lens only. 86-91 Red lens with blue dot installed, only.
1/28
H 3 CONTENTS 4 L
DIRECTIONAL SIGNAL LIGHT KITS ORIGINAL H-D STYLE
12V, U.S.A. MADE, flat lens turn signal kit. A variable load flasher such as part No. 17-125 (see page 1-66) must be used to activate lamp assemblies. NOTE: Kit does NOT include any mounting brackets, clamps or extra lenses. They MUST be ordered separately. 8-109 Flat lens style turn signal kit. SOLD AS KIT Replacement parts and mounting hardware for above kit: MIDWEST OEM NO. PART NO. DESCRIPTION 8-107 Signal w/amber lens. 68487-82 & 11-80 Handlebar clamps. 68486-82A 68477-73 11-78 Bracket to lamp. 68480-73 11-79 Rear signal support. 68570-63 86-88 Extra red lenses. 68571-63A 86-121 Clear lens, flat, small. This 12V, U.S.A. MADE, early style turn signal kit includes: MIDWEST QTY. OEM NO. PART NO. DESCRIPTION 4 68514-73 8-71 Signal w/amber lens. 2 68487-82 & 11-80 Handlebar clamps. 68486-82A 2 68477-73 11-78 Bracket to lamp. 2 68480-73 11-79 Rear signal support. 2 86-85 Extra red lenses. 8-110 Early style (1973 thru 1986) turn signal kit.
SOLD AS KIT
This 12V, U.S.A. MADE, late style turn signal kit includes: MIDWEST OEM NO. PART NO. DESCRIPTION 68406-86 Signal w/amber lens. 68487-82 & 11-80 Handlebar clamps 68486-82A 68477-73 11-78 Bracket to lamp. 68480-73 11-79 Rear signal support. 86-84 Extra red lenses. 86-92 Extra red lenses. 68457-86 86-120 Clear lens (available separately). 8-111 Late style (1986 & later) turn signal kit.
SOLD AS KIT
LOAD EQUALIZERS
17-145
17-146
17-146
Dual version of the above - two inputs, two outputs. Does Run & Stop or High & Low. Does Run & Turn for a pair of turn signals with one module. Runs up to 100 watts total for Driving Lights (2x50W, 4x25W). SOLD EACH Fits any 12 volt system!
1/29
H 3 CONTENTS 4 L
1
A
17-83
A. LOAD EQUALIZERS
LOAD EQUALIZER
Designed to return amperage draw to the correct factory specification when aftermarket marker lights are used to replace stock turn signals on H-Ds which have a self-cancelling system. Can also be used in place of a heavy duty flasher on early model bikes when small marker lamps with wedge bulbs are being used as turn signals. 17-83 Load Equalizer SOLD EACH
LOAD EQUALIZER II
Performs the exact same function of part No. 17-83 above with the added feature of allowing retention of the emergency flasher capability. This unit has a built-in thermoster which retains the resistors heat while your bike is functioning in the emergency flasher mode. 17-111 Load Equalizer II. SOLD EACH
17-123
17-143
Fits H-Ds: XL, FX and FL models from 73 thru 84, and Custom Motorcycles. Also fits any motorcycle with modified wiring or without factory plugs. 17-112 The Illuminator I. SOLD EACH
1/30
H 3 CONTENTS 4 L
A. THE PLUG-IN ILLUMINATOR MODULE
Same features and functions as the original Illuminator, but with an added plug-in feature. Plugs Fit H-Ds: FLH models from 85 thru 90, Softail and FXR models from 86 thru 95, Dyna models from 95 thru 96, XL models from 86 thru 90, with OEM 6 pin taillight connector and wires in the OEM location. 17-136 The Plug-In Illuminator. SOLD EACH Security System compatible! Fits H-D: FLH models 97 to present, Softail models from 96 to present including Deuce Softails (not Rockers, see below), Dyna models from 97 to present, XL models from 99 thru 03. 17-137 The Plug-In Illuminator. SOLD EACH Security compatible! Fits H-D: Sportsters models 04 to present 17-138 The Plug-In Illuminator. SOLD EACH Fits H-D: Rockers (for changing out OEM Rear Turn Signals only) 17-139 The Plug-In Illuminator. SOLD EACH
1
A
17-136
17-110
17-142
NOTE: Newer Harley-Davidsons run the ignition circuit through the OEM 12 pin security & selfcanceling modules. Check your service manual schematic, to make sure your module does not include this circuit. You can not use our 12 pin module if your security or self canceling module includes this circuit.
1/31
H 3 CONTENTS 4 L
1
A
89-95 89-96 89-98 89-243
89-97
A. VISORS
APPLICATION Headlight Headlight Spotlight Marker light Turn signal Taillight PART NO. 89-243 89-107 89-97 89-95 89-96 89-98 DESCRIPTION UNIT Fits Sportster 5-34 headlights. Will also fit 7 headlight, but shorter & SOLD EACH much more stylish than below part No. 89-107. OEM 67750-88T. Fits all 7 Big Twin headlights 1949 & later part No. 8-77. OEM 67752-77T. SOLD EACH Designed to fit the H-D 6V or 12V spotlight. OEM 67783-78T. SOLD AS PAIR Designed to fit the bullet shaped marker lamps. OEM 67785-78T. SOLD AS PAIR Designed to fit late style H-D turn signals. OEM 67737-88T. SOLD AS PAIR Designed to fit H-D 74 taillight 1955 thru 1972 part No. 8-59. SOLD EACH OEM 68014-88T.
CHROME PLATED
CHROME PLATED
SOLD EACH
VISOR
This light and license mounting plate adapts to most any cycle. Its made from heavy 18 gauge steel, and measures 7 wide and 7 high. 11-39 Fits taillights part No. 8-73, 8-79, SOLD EACH 8-185, and 8-186.
1/32
H 3 CONTENTS 4 L
A. LAY DOWN LICENSE PLATE BRACKET
Die cast chrome plated license plate bracket has 3 hole mounting like stock H-D bracket. Rubber spacers help eliminate vibration, and lets you adjust plate angle. 11-96 Fits all H-D models with 3 or 2 hole SOLD EACH mounting. Can be used on many custom applications.
CHROME PLATED
11-124
11-120
11-128
11-126
11-129
11-125
E. MALTESE KROMETS
A decorative fastener that can be used anywhere on the bike but is best suited for license plate mounting. Excellent finish and detail. Removable stud, nylock nut and washers. 41-99 Maltese krommets. SOLD AS PAIR
11-127
11-144
D
11-44
E
11-99 3/8 SHOULDER CHROME PLATED 3/4 APPROX.
1/33
H 3 CONTENTS 4 L
DIE CAST
License plate frame measures 7-14 x 4-14. 11-37 Plain license plate frame.
SOLD EACH
This horizontal side mount license bracket bolts to softail belt guard tabs and has a LED license plate light. 11-308 Left side horizontal mount. SOLD EACH
F H
G 1/34
H 3 CONTENTS 4 L
A. CHROME BILLET LICENSE PLATE FRAME
WITH LED TAILLIGHT
These license plate mounts are CNC made form 6061-T6 alum and are beautifully chrome plated. They feature high intensity LED taillights and include wiring & mounting hardware as needed. Fits both 1 & 3/4 dia. axles w/use of an insert styled spacer included. DIAMOND LED TAILLIGHT 11-301 Mounts on rear fender. Fits most models 1973 thru 2003 Softail. SOLD EACH 11-302 Radius side mount. Fits 1986 & later Softail. 11-303 Horizontal side mount. Fits 1986 & later Softail. 8-285 Die cast, chrome plated diamond taillight only, with LED illumination. 8-291 Replacement LED board for above part numbers. CYCLOPS LED TAILLIGHT 8-370 Side mount Horizontal Cyclops LED taillight. SOLD EACH 8-371 Side mount Radius Cyclops LED taillight. 8-372 Side mount Vertical Cyclops LED taillight. 8-373 Cyclops LED taillight fender mount license plate & rubber mount. 8-374 Cyclops replacement light for above part numbers.
11-302
8-285
11-301
11-303
8-370 8-372
Skull, horizontal side mount for Softail.. Replacement LED board for above part numbers.
8-371
8-373
8-227
1/35
H 3 CONTENTS 4 L
1
8-275
B
8-148
8-354
8-355
C
11-309 11-310
1/36
H 3 CONTENTS 4 L
A. LOUVERED LICENSE BACKING PLATE
A neat dress-up for the back of license, this chrome plated steel backing plated fits 7 x 4 plates. 11-97 Louvered backing plate. OEM 59899-88T. SOLD EACH
1
CHROME PLATED
CHROME PLATED
C
CHROME PLATED 11-28 CHROME PLATED
E
TORNADO TWIST
1/37
H 3 CONTENTS 4 L
CHROME PLATED
ELECTRIC
FOR GENERATORS
Hard-to-find parts needed to rebuild generators for HarleyDavidsons. 77-113 Fits No. 32E & 52 generators, 1936 SOLD AS KIT thru 1957 Big Twins. American made. 77-114 Fits Big Twin 1958 thru 1969 and Sportster 1958 thru 1981.
C. ARMATURES
Imported armature for H-D. 53-152 For H-D 65, 12 volt. OEM 30851-65TA. U.S.A. MADE armature for H-D. 53-215 For H-D 65, 12 volt. OEM 30851-65A.
SOLD EACH SOLD EACH
D. FIELD COILS E
70-117
70-196
Fits H-D generators. Each set consists of one shunt & one regulating coil. These coils feature high strength warp-free iron laminates, heat resistant, heavy gauge copper core wiring, wrapped woven cloth insulation (not paper), soldered field & ground terminals, and are matched paired for exact amperage values. SOLD EACH 53-214 Model 65A. Imported. OEM 30201-65T.
E. MIDWESTS GENERATORS
Our top of the line 12 volt generator fits Big Twin, Sportster & ServiCar with 12V system. 516 Mounting screws. We also carry many of the repair & replacement parts for these generators. 70-117 Black generator. OEM 29975-65TA. SOLD EACH 70-121 Chrome generator. OEM 29976-83T. NO EXCHANGE NECESSARY 70-196 Black generator with finned built-in regulator. 70-197 Chrome generator with finned built-in regulator.
70-197
F
CHROME PLATED
Heavy gauge steel stamping, finest quality. Easy to install. SOLD EACH 89-32 For Sportster & 74 C.I. 1958 & later. OEM 31081-83T.
1/38
H 3 CONTENTS 4 L
A. GENERATOR END REGULATOR
Solid state 12V regulator hides inside of end cap. Great for custom bikes where you dont want a lot of stuff hanging off or you want to trash that old mechanical regulator. 53-421 Regulator; hides inside chrome end SOLD EACH cover (included). 53-601 Black finned generator end cap with regulator & bearing. 53-602 Chrome finned generator end cap with regulator & bearing.
53-602
1
A
53-421
B
HIGH QUALITY CHROME PLATED
C. ROTORS
These rotors have enclosed magnets; no chance that they can come loose. Fits Big Twin 1981 & later. Replaces OEM 29957-81B & 2995785A. Rotors will work on all H-D Big Twin with correctly matched stator and volt pak. Refer to service manual for proper spacing due to different sprocket shaft lengths and compensator stack heights. 53-603 Heavy duty rotor; 22/32 amp. SOLD EACH 15/32 Thick at splines. No tear out. 53-604 Late OEM style rotor; 22-32 amp. .195 Thick at splines. Supplied with two washer spacers: OEM 29961-85 (1.75 O.D. x .093 thick) and OEM 29960-85 (2.81 O.D x .219 thick). 53-52 Rotor; 38 amp. OEM 29981-95. 53-615 Rotor; 45 amp. OEM 29999-97. 53-678 32 amp rotor kit. Replaces SOLD AS KIT OEM 29957-81B. Fits 1976 thru 1999 models.
C
53-603
53-605
D. CHARGING SYSTEM
Kit includes chrome solid state voltage regulator, stator, rotor (your choice of heavy duty or late OEM style), and mounting hardware. Fits 1970 thru 1999. 53-605 Kit with heavy duty rotor; 32 amp. SOLD AS KIT 53-606 Kit with late OEM style rotor; amp. SOLD AS KIT 53-55 Kit with 38 amp components. Twin Cam. SOLD AS KIT 53-630 Rotor spacer, small. OEM 29961-85. SOLD EACH 53-631 Rotor spacer, large. OEM 29960-85. SOLD EACH
53-630
53-631
53-606 53-55
1/39
H 3 CONTENTS 4 L
GENERATOR PARTS
ALL PARTS SOLD EACH EXCEPT AS NOTED
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
95-174 96-241 53-324 95-103 53-185 53-256 53-144 53-253 95-102 95-101 53-311 53-252 53-193 53-161 53-298 53-146 53-144
NEEDLE BEARING 74 1961/1969 SPORTSTER 1961/1981 (OEM 9064) LOCKWASHER 14 (OEM 7036) CHROME END COVER COMMUTATOR 65A MODEL GENERATOR OEM 30132-61A) OIL SEAL BRUSH END NEEDLE BEARING TYPE 74 1961/1969, SPORTSTER 1961/1976 SERVI-CAR 1961/1966 (OEM 12002) BRUSH HOLDER 12 VOLT H-D 65A GENERATOR (OEM 30350-65) POLE SHOE SCREW (USE 2) 58 & 65A (OEM 30280-58) BRUSHES 74 1958 & LATER, XL, XLCH, SERVI-CAR (OEM 30426-58) SOLD EACH GENERATOR DRIVE END COVER 58 & 65A. ALUMINUM (OEM 30095-61) OIL SEAL GEAR END 61 & 74 OHV 1946 & LATER FLATHEADS, & 45 (OEM 30145-46A) BEARING GEAR END (OEM 9007) U.S.A. MADE SNAP RING (OEM 11004) U.S.A. MADE GEN. FRAME SCREW SPORTSTER 1958/1980 74 1958/1969 (OEM 30012-58) DEFLECTOR 1958 & LATER (OEM 31035-58) GEAR 14 TOOTH (OEM 31073-63A) OIL SEPARATOR WASHER (OEM 31067-63) BRUSHES ALL BIG TWINS 1953/1957 ACCUMAX (OEM 30425-51) SOLD AS SET (3 BRUSH SET) BRUSHES 74 1958 & LATER, XL, XLCH, SERVI-CAR (OEM 30426-58) SOLD EACH
1 2
6 4 5
7 11 10 14 13 16
15
12
16
1/40
H 3 CONTENTS 4 L
A. STATORS
BIG TWIN 53-186 Fits 1970 thru 1975 H-D 74 4 Wire, SOLD EACH 15 amp. OEM 29965-70. 53-128 Fits 1976 thru 1980 H-D 74 & 80. 2 Wire, 17.8 amp. OEM 29965-75. 53-251 Fits 1981 thru 1988 H-D 80 2 Wire, 22 amp. OEM 29965-81. 53-319 Fits all models 1989 thru 1999 H-D 80. 32 Amp. OEM 29970-88. Will also work on earlier models when equipped with high output 32 amp alternator kit. 53-54 38 Amp. Replaces OEM 30017-01. 53-680 40 Amp, 3 phase. Fits 2006-2008 Dyna. Replaces OEM 30017-07. 53-720 Fits 99-00 Softails & 00-02 Dyna, 32 amp. OEM 29951-99. 53-721 Fits 97-98 EVO FLT, 45 amp. OEM 29987-97. 53-722 Fits 99-01 FLT, 45 amp. OEM 29987-99. 53-723 Fits 02-04 FLT, 45 amp. OEM 29987-02. SPORTSTER 53-300 Fits Sportster 883cc, 1100cc and SOLD EACH 1200cc, 1986 thru 1990. 19 Amp. OEM 29967-84A. 53-320 Fits Sportster 883cc & 1200cc, 1991 & later. 22 Amp. OEM 29967-89. 53-216 Stator locking kit; fits all Big Twins 1970 thru 1986.
SOLD AS KIT
A
53-128
29967-84A 1985 / 1990 XL 29967-84 1985 / 1990 XL 29967-89 1991 & Later XL
SOLD EACH
D
PLASTIC
1/41
H 3 CONTENTS 4 L
1
BLACK
CHROME PLATED
A CONNECTOR TYPES E APPLICATION FL & FLH. XL, XLH & XLCH. FL & FLH. FX & FXE. FL, FLH, FLH-80, FLT & Classic FX, FXE, FXS, FXS-80 & FXEF-80. XLCH. XLH, XLCH & XLS. FLH 80 & Classic. FX, FXE, FXEF, FXS & FXB. FXWG. FLT & FLHT Classic FXR, FXRS, FXRT & FXRP. Softail models. XL, XLS & XLX. XL. All Big Twin models. XL. XL 883 / 1200. F YEAR
D
CONNECTOR TYPE
H CHARGING SYSTEM Replaces 12V mechanical regulator or 12V generator. 15 Amp alternator. 17.8 Amp alternator 12V Generator 22 Amp alternator.
1965/1969 1965/1977 1970/1975 1971/1975 1976/1980 1976/1980 1977 1978/1981 1981/1984 1981/1985 1981/1986 1981/1988 1982/1988 1986/1988 1982/1984 Late 1986/ 1990 1989 & Later 1991/1993 1994 & Later
H A B E D
74504-82 12V Generator. 74523-84A 19 Amp alternator. 74519-88 32 Amp alternator. 74523-91 22 Amp alternator. 74523-94A
SOLD EACH
F G C G
1/42
H 3 CONTENTS 4 L
MIDWESTS POWERPAKS
U.S.A. MADE POWERPAKS, solid state voltage control units, significantly & economically upgrade the electrical system of motorcycles. They exceed all factory design specifications, delivering improved electrical performance for lighting, battery charging & ignition while preventing damage to all power sources (generators, alternators, flywheel magnetos, etc.) and wiring systems. Lights deliver increased brilliance, last longer, and normally stop flickering. Batteries are kept at precise charging levels and will not boil over or go flat. Exact voltage control for other systems, particularly ignition, results in easier starting, increased performance and elimination of high speed miss due to faulty current control. Many motorcycles can be converted to batteryless (battery elimination) mode for special applications when these Powerpaks are used in conjunction with our part No. 53-125 capacitor. Among the most advanced & reliable voltage control units available, they are impervious to heat, cold, vibration, shock, moisture, oil, dust, dirt, & virtually all common elements. There are no moving parts and they never require adjustment or maintenance. Easily & compatibly installed to stock wiring. Eliminate unreliable stock regulators, rectifiers, relays, zenor diodes, capacitors, ballast resistors, & inductors with our POWERPAKS. ONE YEAR WARRANTY: All warranteed solid state electronics are guaranteed against any manufacturing defects for one year from the date of purchase. Each unit is warranteed against normal use failure from moisture, corrosion, engine vibration, ambient heat and cold when properly installed. MIDWEST waives responsibility for failure of faulty OEM, aftermarket or other replacement electrical parts (lights, fuses, wiring shorts, etc.). All warranty claims must be processed through our MIDWEST customer service department. All warranty claims must be accompanied by MIDWEST invoice number and purchase date.
53-53
SOFTAIL 2001 & LATER This unit is 38 amp, chrome. Replaces OEM 74610-01 & 74540-01 (imported). PLUG NOT SHOWN. 53-53 For Softail 2001 & later. SOLD EACH CONNECTOR TYPES A B C
CHROME PLATED
CHROME PLATED
D
CHROME PLATED
1/43
H 3 CONTENTS 4 L
1
A
53-274
53-269
53-275
53-577
C. REGULATOR COVERS
CHROME PLATED
Cover kit for 1989 thru 1999 Softail. OEM 74578-97. Cover kit for 1991 & later Dyna. OEM 74577-97. Cover kit for 1985 & later XL (shown). OEM 74579-97. Cover kit for 2001-2006 Softail. OEM 74597-01.
SOLD AS KIT
F
CHROME PLATED
Chrome relay cover fits all FL 1965 thru 1984. OEM 66425-68. 89-282 Relay cover.
SOLD EACH
1/44
H 3 CONTENTS 4 L
A. STARTER COVERS
89-1 89-280 For Prestolite starter motor on FL 4 speed (except Classic) 1966 thru 1982, and XLH 1967 thru 1980. OEM 31350-83T. For all 5 speeds 1980 thru 1988. OEM 31507-87T.
SOLD EACH
89-280
89-1
31489-79B
SOLD EACH
E. SOLENOID COVER
Fits all models 1991 & later except V-Rod. 89-8 Chrome cover. Replaces OEM 31783-00 & 31688-90.
SOLD EACH
E F
CHROME PLATED 53-294 53-293
G. STARTER SHAFT
70-111 Fits FL 1970 thru 1982, FX 1971 thru 1984, FXWG 1980 thru 1983, chain drive 4 speed models. OEM 31482-70.
SOLD EACH
1/45
H 3 CONTENTS 4 L
1 2 3 4 5 6 7 8 9
95-413 95-226 96-310 78-155 70-111 53-295 95-598 70-109 70-110 96-241
THRUST WASHER FL & FX 1965/1985 (OEM 31502-65) SOLD AS PAIR NEEDLE BEARING (OEM 9063) RET. RING (OEM 11039) U.S.A. MADE GASKET FL, FLH & FX, 1965/1982 (OEM 60559-80) STARTER SHAFT FL 1970/1982 FX 1971/1983 EXCEPT FXB & FXSB (OEM 31482-70) OIL DEFLECTOR PLATE 1965/1982 (OEM 60516-65A) STARTER SHAFT BEARING TORRINGTON (OEM 9062) STARTER HOUSING PRESTOLITE TYPE STARTER. 1965/E. 1979. (OEM 31465-65) STARTER HOUSING HITACHI TYPE STARTER 1973/E. 1979. (OEM 31572-73) LOCKWASHER (OEM 7036)
2 4 3
7 6
2 7
1/46
H 3 CONTENTS 4 L
ULTIMA THUNDER FIRE HEAVY DUTY STARTERS 89-06
Ultima is setting the standard in Starter performance and value with the new Heavy Duty series Thunder Fire starters for 1989 thru 2006 model Big Twins, except 2006 Dynas. These Starters are built with all new tooling and all parts are new not Re-manufactured like some of our competitors. We have made improvements to the key components in these starters to insure long life and exceptional performance. We are sure you will agree these are a best value product.
Black Wrinkle finish 1.4 KW Series Top Post 1.75 KW Series
1.4 KW SERIES
Availible in Black or Chrome Fits all 89/05 model Big Twins with no clearance issues Works with OEM battery Each Starter is individually tested with data sheet included Great upgrade for stock and 1.4 Kw starters. Made for trouble free starting of most small strokers Fits some stock applications on Big Twins where 3/4 longer body is not a problem. Includes manual push button cap on solenoid Works with OEM battery Each Starter is individually tested with data sheet included Made for Big Inch engines Heavier Clutch Gears Fits some stock applications on Big Twins where 7/8 longer body is not a problem. Fits FLT and Dyna when used with 89-14 oil filler spacer Includes manual push button cap on solenoid Requires a 300 amp Battery and good cables for best results Each Starter is individually tested with data sheet included Made to Start anything Big Inch Heavier Clutch Gears Includes manual push button cap on solenoid Requires a 300 Amp Battery and good cables for best results Each Starter is individually tested with data sheet included STARTER BOLTS 70-218 Starter Bolt; 1/4-20 x 5-1/4 70-219 Starter Bolt; 10-32 x 6 TOP POST STARTERS 70-220 1.4 Kw Chrome Plated 70-221 1.4 Kw Wrinkle Black 70-224 1.75 Kw Chrome Plated 70-226 2.0 Kw Chrome Plated 70-228 2.4 Kw Chrome Plated ANGLED POST STARTERS 70-222 1.4Kw Chrome Plated 70-223 1.4Kw Wrinkle Black 70-225 1.75 Kw Chrome Plated 70-227 2.0 Kw Chrome Plated 70-229 2.4 Kw Chrome Plated
1.75KW SERIES
2.4 KW Series
2.0 KW SERIES
2.4 KW SERIES
1/47
H 3 CONTENTS 4 L
Item Number 1 2
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
Description Connector Electro-magnetic Switch Assembly and Housing (Angled Post), Chrome, includes # 1,20,28 Electro-magnetic Switch Assembly and Housing (Angled Post), Black, includes # 1,20,28 Electro-magnetic Switch Assembly and Housing (Top Post), Chrome, includes # 1,20,28 Electro-magnetic Switch Assembly and Housing (Top Post), Black, includes # 1,20,28 Starter Seal/Gasket Kit Yoke Assembly, Includes Internals plus 2 Brushes and Connector (for 1.4KW Starter), Chrome Yoke Assembly, Includes Internals plus 2 Brushes and Connector (for 1.4KW Starter), Black Yoke Assembly, Includes Internals plus 2 Brushes and Connector (for 1.75KW Starter), Chrome Insulating Boot Bearing, Armature, 6002 Series Armature Assembly (for 1.4KW Starter), includes # 6,8 Armature Assembly (for 1.75KW Starter), includes # 6,8 Bearing, Armature, 608 Series Spring, Brush - Includes 2 springs Brush Plate Assembly, Includes 2 Brushes and 2 Springs Starter End Cap, Chrome Starter End Cap, Black Fastener Kit, Brush Plate (2 Screws), Chrome Fastener Kit, Brush Plate (2 Screws), Black Fastener Kit, Starter Housing (2 Screws), 1.4 KW, Chrome Fastener Kit, Starter Housing (2 Screws), 1.4 KW, Black Fastener Kit, Starter Housing (2 Screws), 1.75 KW, Chrome Steel Ball Spring Plunger Assembly Solenoid Cover Assembly (for 1.4KW Starter), Chrome Solenoid Cover Assembly (for 1.4KW Starter), Black Solenoid Cover Assembly w/push button (for 1.75KW Starter) Idler Gear Bearing and Shaft Assembly, Idler Gear Starter Post Assembly, Main Power (long post) Fastener Kit, Starter Housing (2 Screws) Face Plate, Starter Housing, Chrome Face Plate, Starter Housing, Black Bearing, Clutch, 6004 Series Clutch Assembly, Starter, includes # 23,25 Bearing, Clutch, 6904 Series Spring Output Shaft, Starter Starter Post Assembly, Solenoid to Starter Motor (short post)
1/48
Part Number 70-201 70-204 70-203 70-266 70-290 70-212 70-213 70-207 70-214 70-215 70-217 70-205 70-206 70-267 70-268 70-208 70-269 70-263 70-270 70-264 70-271 70-265 70-307 70-272 70-273 70-250 70-251 70-261 70-274 70-252 70-253 70-254 70-255 70-256 70-262 70-257 70-211 70-258 70-259 70-260 70-283
H 3 CONTENTS 4 L
ULTIMA 2.0 & 2.4 KW THUNDERFIRE STARTERS
Item Number 1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
Description Electro-magnetic Switch Assembly and Housing (Angled Post), 2.0 KW, includes # 2,11,27 Electro-magnetic Switch Assembly and Housing (Top Post), 2.0 KW, includes # 2,11,27 Electro-magnetic Switch Assembly and Housing (Angled Post), 2.4 KW, includes # 2,11,27 Electro-magnetic Switch Assembly and Housing (Top Post), 2.4 KW, includes # 2,11,27 Connector Starter Seal/Gasket Kit, 2.0 KW Starter Seal/Gasket Kit, 2.4 KW Spring, Brush, 2.0 KW - Includes 2 springs Spring, Brush, 2.4 KW - Includes 2 springs Brush Plate Assembly, 2.0 KW, Includes 2 Brushes and 2 Springs Brush Plate Assembly, 2.4 KW, Includes 2 Brushes and 2 Springs Bearing, Armature, 6200 Series Armature Assembly (for 2.0KW Starter), includes # 6,8 Armature Assembly (for 2.4KW Starter), includes # 6,8 Bearing, Armature, 608 Series Yoke Nut-Pin (2 Nut-Pins) Yoke Assembly, Includes Internals plus 2 Brushes and # 9 (for 2.0KW Starter) Yoke Assembly, Includes Internals plus 2 Brushes and # 9 (for 2.4KW Starter) Starter Post Assembly, Main Power (long post) Steel Ball Spring Plunger Assembly Insulating Boot Solenoid Cover Assembly, w/Push Button Fastener Kit, Starter Housing (2 Screws) Fastener Kit, Starter Housing (2 Screws, 2 Washers) Drive Gear, Armature Idler Gear 2.0 kw Idler Gear 2.4 kw Bearing and Shaft Assembly Face Plate, 2.0 KW, Starter Housing Face Plate, 2.4 KW, Starter Housing Bearing, Clutch, 6004 Series Clutch Assembly Spring Output Shaft, Starter Starter Post Assembly, Solenoid to Starter (short post)
Part Number 70-275 70-285 70-299 70-301 70-276 70-277 70-302 70-278 70-303 70-279 70-304 70-280 70-281 70-282 70-267 70-284 70-286 70-287 70-288 70-272 70-273 70-289 70-291 70-292 70-293 70-294 70-295 70-296 70-305 70-297 70-298 70-306 70-257 70-247 70-248 70-249 70-300
1/49
H 3 CONTENTS 4 L
ULTIMA THUNDER FIRE HEAVY DUTY STARTERS FOR 1965 THRU 1986 MODEL BIG TWINS
70-230
70-231
Our Starters are designed to replace the obsolete designs of the Prestolite and Hitachi starters used on 1965 thru 1986 model Big Twins. Based on all new tooling some of these models will offer over two times as much cranking power over their older designed counterparts. These starters boast a 1.4 + KW rating and will turn over Stockers and Strokers with ease. These are a highly recommended upgrade for older models. 70-231 70-230 70-232 70-233
70-232
1980/1985 FLT, FLHT, FXR models rubber mounted engine, 5 speed transmission and exposed rear chain. All Big Twin models 1986 thru 1988. 1979/Early '84 models with 4 speed transmission and rear chain drive. All Big Twin models 1967/ Early 1979 with solid mount engine.
70-233
70-234
1/50
H 3 CONTENTS 4 L
A. ULTIMA THUNDER FIRE PRESTOLITE-TYPE STARTER MOTORS
Fits FL 1966 thru 1981, FLT 1980 thru 1982, FXR 1982, XL 1967 thru 1973, and XL 1977 thru 1980. A fine restoration item, this reproduction of the H-D OEM Prestolite electric starter motor is available in chrome or black. We also offer many of the replacements parts for this starter motor. 70-130 Complete black starter motor assembly. OEM 31458-66A.
SOLD EACH
1
A
70-131
SOLD EACH
70-139
SOLD EACH
1/51
H 3 CONTENTS 4 L
70-209 70-210
B. STARTER GEAR
U.S.A. MADE Bendix 5 roller starter gear. For 1965 thru 1988. Replaces OEM 31443-65. 53-157 Midwest brand (best buy). SOLD EACH 53-367 Accel.
C. ELECTRICAL RELAY
Heavy duty multi use 14VDC electrical relay. Fits Big Twin & Sportster models and custom applications. 53-695 Multi use electrical relay 14VDC. OEM 31504-91A. SOLD EACH
D
17-301
F. MINI RELAY E
This mini relay can be used as a starter or headlight relay. Replacement relay for Ultima and other aftermarket wiring modules. 18-535 Replacement starter/headlight relay. SOLD EACH
1/52
H 3 CONTENTS 4 L
STARTER/SOLENOID PARTS FOR H-D ALL YEARS
SOLD EACH EXCEPT AS NOTED
2 3 4 5 6
STARTER RELAY FL & FLH 1965/1973, XLH 1967/E. 1968, AND XLH L. 1971 / 1974. ZINC FINISH (OEM 71455-67) STARTER RELAY 1980/1992 MOST MODELS BIG TWIN & SPORTSTER. MIDWEST (BEST BUY) (OEM 31506-79B) STARTER RELAY 1980/1992 MOST MODELS BIG TWIN & SPORTSTER. ACCEL (OEM 31506-79B) MULTI USE ELECTRICAL RELAY 14VDC. OEM 31504-91A. NOTE: DUE TO MID YEAR CHANGE, EARLY 1993 APPLICATION IS NOT LISTED. YOU MUST CHECK THE RELAY TO DETERMINE WHICH TYPE YOU NEED. FITS L. 1993 & LATER MODELS BIG TWIN & SPORTSTER (OEM 31504-91A). ALSO USED AS BRAKE LIGHT RELAY ON 1991 & LATER FLT MODELS. BLUE STREAK STARTER RELAY (OEM 71463-73) U.S.A. MADE STARTER RELAY (OEM 71463-73) OVER RUN SPRING BIG TWIN 1956/1988 AND SPORTSTER 1965/1980 (OEM 31438-65A) CHROME SOLENOID COVER BLACK RUBBER SOLENOID BOOT ALL MODELS (OEM 31444-65A) CHROME SOLENOID END COVER ALL MODELS. FITS OVER RUBBER SOLENOID BOOT RUBBER SOLENOID INNER BOOT BIG TWIN 1965/1988 AND SPORTSTER 1967/1980 (OEM 31441-65A)
5 4
B C
CHROME PLATED
CHROME PLATED
1/53
H 3 CONTENTS 4 L
SWITCH
Virtually waterproof. Enclosed terminals. Swivel mounted 5 length. 17-19 Universal application on motorcycles, SOLD EACH mini-bikes and snowmobiles.
39-149
39-149 72023-51D
C
17-61
YEAR 1951/1973 1958/1970 1979/2002 1971/1984 1971 & 1972 1979/1983 1982 & 1983 Late 1984 & Later 1991 & 1992 2003/2008 2005/2007 2004/2008 2007/2008
MODEL Servi-Car 750cc/45). FL & FLH(1200cc/74). XL, all models. FL (1200cc/74, 1340cc/80). FX (1200cc/74). FX (1200cc/74, 1340cc/80). FXR (1340cc/80). All Evolution Big Twin Twin (1340cc/80, including Dyna Wide Glide). Touring, Sportster Dyna Softails V-Rod
17-65
Protect your Harleys engine with reliable U.S.A. MADE oil pressure switches. These oil pressure switches are designed to stringent quality control specifications, assuring accurate pressure thresholds. Heavyduty electrical contacts, brass pressure ferrules, rugged thermoplastic insulators, and corrosion-resistant plated steel shells are used for maximum dependability. PART NO. OEM NO. YEAR 17-61 26552-72 1980/1992 1980/1983 1982 & 1983 1971/1984 17-64 17-65 MODEL FL, FLHT & FLH-80. FLT & FLHT. FXR, FXRS & FXRT. FX, FXE, FXS1200, FXEF-80, FXS-80, FXB-80 & FXWG-80. 26554-77 1977/2009 Sportster 26561-84 1984/1986 All FX Models 1987/1992 All FXR Models 1984/1999 All Softail Models 1991/1999 All Dyna Wide Glide models. 1986 FXR 1984 & 1985 FXRT & FXRS. 1984 & 1985 FLT Classic, FLHT Classic. 26561-99 1999/2008 Dyna, Touring 2000/2008 Softail 2003/2008 V-Rod
SOLD EACH
39-148
D
17-703 PLAIN METAL 17-72
39-148
1/54
H 3 CONTENTS 4 L
A. STAINLESS PUSH BUTTON SWITCHES
Heavy duty 12v switch measures 7/8 dia. and flush mounts to any flat surface. 17-133 Polished stainless push button switch. SOLD EACH
1
17-133
E. IGNITION SWITCHES
17-74 17-60 Fits FX, FXE, XLH & XLCH, 1973 thru SOLD EACH 1977. OEM 70124-75. Fits FX 1978 thru 1985, FXR 1982 thru 1988 and XL 1978 thru 1988. OEM 71425-77.
CHROME PLATED
17-60
1/55
H 3 CONTENTS 4 L
1
A
CHROME PLATED
CHROME PLATED
Reproduction of late style switch retrofits to earlier models to give the ease of electronic ignition. Resists corrosion & vibration. Includes reversible keys and both styles of switch caps. 17-109 Switch with all stainless steel SOLD EACH construction (best quality). 17-802 Standard switch with round key. 17-85 Standard switch. 17-804 Stainless steel switch with round key.
E
CHROME PLATED
U.S.A. MADE toggle switches available in 2 position on-off or 3 position on-off-on. Butt mount thru 12 hole. 17-46 2 Position, on-off. SOLD EACH 17-47 3 Position, on-off-on.
G. HANDLEBAR SWITCH
17-36 Handlebar light switch to fit H-D. Replaces OEM 71840-29.
SOLD EACH
CHROME PLATED
1/56
H 3 CONTENTS 4 L
A. HANDLEBAR PUSH BUTTON SWITCH
17-35 Handlebar starter or horn switch to fit H-D. OEM 71800-26A.
SOLD EACH
1
A
CHROME PLATED
17-131
Mini switch. Installation requires SOLD EACH a 9/32 (7.1mm) drill and 5/16 UNF tap. Includes two 20 wires.
17-3
E. DIMMER SWITCH
Cateye dash mounting plate dimmer switch with knob. Includes two rivets and set screw. OEM 71600-39. 17-57 Fits part No. 21-129 & 21-131 SOLD EACH cateye mounting plates.
E
CHROME PLATED KNOB
1/57
H 3 CONTENTS 4 L
1
A
17-87 17-49
Switch assemblies with color coded wire already soldered for easy installation. Available in factory color black or chrome style.
17-86
C
CHROME PLATED
1982 THRU 1995 CHROME BLACK OEM NO. 17-86 71574-82 71590-92 17-91 17-95 71589-92 17-92 17-96 71591-92 17-93 17-97 71597-92 17-94 17-98 71599-92 1996 & LATER CHROME BLACK OEM NO. 17-101 17-102 17-103 17-104 17-100 17-105 17-106 17-107 17-108 71590-96 71589-96 71591-96 71597-96 71598-96
DESCRIPTION Handlebar stoplight switch. Engine run/off, starter. Right turn switch. High/Lo, horn. Left turn switch. DESCRIPTION Handlebar stoplight switch. Engine run/off, starter. Right turn switch. High/Lo, horn. Left turn switch.
SOLD EACH
SOLD EACH
53-655
SELF ASSEMBLY KITS SOLD EACH 53-653 Set at 3 of mercury. 53-654 Set at 4 of mercury. 53-655 Set at 5 of mercury. 53-656 Set at 6 of mercury.
MODEL All Sportsters. FXST. FLT. XL, XLS & XLX. All FXR. All FXST & FLST.
1/58
H 3 CONTENTS 4 L
WIRE PLUS MODULAR MOTORCYCLE WIRING SYSTEMS & ACCESSORIES
Wire Plus offers a complete line of self-diagnostic wiring systems to fit any stock or custom application. All Wire Plus systems feature solid state breaker technology, (breakers that never need to be replaced) and all components are combined in one compact weatherproof design.
Wire Plus offers a complete line of self-diagnostic wiring systems to fit any stock or custom application. All Wire Plus systems modules feature Solid State breaker technology, (breakers that never need to be replaced) and a replaceable start relay that can be purchased at an auto parts store. These components are molded into an epoxy encapsulated module that is waterproof and vibration resistant. Most systems include a compact pre-assembled harness for easy installation, extended for any frame style. Systems feature onboard LEDs that diagnose breakers, start circuits and momentary switch functions, and are available in chopper style. (for use with minimal system switches) All Wire Plus system connectors are now Deutsch weather proof connectors for their small size and reliability! 18-490 Two Plug ignition harness that provides all sensor wires required by stock, and after market, ignition modules. Includes wires and connectors for: M.A.P. sensor, Crank sensor, Bank Angle sensor, Ign. Coil, Ign. module, service engine light, tachometer and Data Link. SOLD AS KIT
Rectangular Instrument panels provide speedometer, bar graph tachometer, trip, odometer and all indicator light functions and new flat panel design that reduces module depth to less than 1 deep with all electronics onboard. (no external brain box) unit measures 2W x 3.35L. Features super bright display technology for true daylight readability with a light sensor for auto-dimming at night. Mounting brackets available for most T-bars and 2 piece riser applications. (mounting bracket is required and sold seperatly) Digital speedometer with bar graph tachometer. 57-310 Bar mount speedo/tach combination. SOLD AS KIT 57-311 Panel mount speedo/tach combination. Mounting brackets - required except for panel mount. SOLD EACH 57-312 Mounting bracket for 1 handlebars. 57-313 Mounting bracket for 1-1/4 handlebars. 57-314 Mounting bracket for 1-1/2 handlebars. 57-315 Tab mount for aftermarket digital speedo mounts.
MOUNTING BRACKETS
1/59
H 3 CONTENTS 4 L
1
A
WIRE PLUS
MODULAR MOTORCYCLE WIRING SYSTEMS & ACCESSORIES A. AUTOMOTIVE START MID FRAME SYSTEM
This new system is the ultimate chopper style wiring system. The preassembled harness is configured for an automotive style start switch (sold seperatly) which eliminates start circuit wiring in the harness. It features a solid-state breaker pack (breakers that will never burn out) that measures approx. 1x 1 and is molded in waterproof epoxy with diagnostic Leds. This system is supplied with an installation kit that allows the builder to add indicator and turn signal wires. 18-497 This kit mounts breaker module and ignition SOLD AS KIT switch at the motor mount area. 18-498 Mid Frame system with chopper style harness for automotive style start. These new systems have the smallest power modules ever! Designed for Bobber and Chopper style bikes with a round oil tank or springs under the seat with no place to hide anything. This module is supplied with a billet aluminum cover, for visible mounting, with holes for viewing diagnostic lights and measures just 1.8 W x 2 H x .85 Deep! Mounts anywhere in the oil tank area. Auto-cancel module sold separately. 18-527 Mid Frame system with harness for stock style handlebar controls.With or without turns or auto-cancel. SOLD EACH 18-528 Mid Frame system with chopper style harness for minimal system switches. With or without turns. 18-524 Mid Frame system with harness for stock style handlebar controls. Includes a seperate 15 amp breaker and wiring for correct connection of compression releases needed for big inch motors. With lighting control module included. C. Z1 STANDARD MID FRAME SYSTEM Same features as Z1 Mini but supplied with longer billet cover for mounting of both modules in one compact location. SOLD EACH 18-525 Mid Frame system with harness for stock style handlebar controls. Includes a separate 15 amp breaker and wiring for correct connection of compression releases needed for big inch motors. With lighting control module included. D. BILLET TOP MOTOR MOUNT Chromed billet construction, provides a coil mounting location that is up and behind the normal top motor mount leaving this area open for Wire Plus switch housings and other billet products. Mounts Twin Cam coils and most new style coils that do not have the electrical connections on the ends. (Crane Hi-4, Dyna 2000i) NOTE: Due to motor and frame variations and this coil mounting location this part will require custom fitting to your applicaton. Spacing will be required. 5-249 Fits all Twin Cam & Evolution engines up to 100 C.I. SOLD EACH 5-250 Fits all Twin Cam & Evolution engines 101 C.I. and up.
1/60
H 3 CONTENTS 4 L
WIRE PLUS
MODULAR MOTORCYCLE WIRING SYSTEMS & ACCESSORIES A. SEAT POST WIRING SYSTEMS
Wire Plus seat post wiring systems are billet construction with built in ignition switch. Mounts to the seat post coil bracket on Big Twins from 1941 thru 1984 and custom frames using the same style coil mount. Includes a built in power module, with diagnostic LEDs, that provides a complete breaker system for the protection of all components, including electric compression releases. Also features a replaceable start relay, circuitry for headlight off at startup & optional connections for neutral and clutch switch safety found on 2007 & up controls. 18-499 Chrome Seat Post system with pre-assembled harness for stock style handlebar controls. Includes auto-cancel / lighting control module to run rear turns as running lights brake lights and turn signals. SOLD AS KIT 18-500 Chrome Seat Post system with Automotive start switch and pre-assembled chopper style harness for minimal system switches. Can be used with or without turn signals. SOLD AS KIT
1
A
Billet construction with built in ignition switch. Mounts to most FXR style top motor mounts. Includes a built in power module, with diagnostic LEDs, that provides a complete breaker system for the protection of all components, including electric compression releases. Also features a replaceable start relay, circuitry for headlight off at startup & optional connections for neutral and clutch switch safety found on 2007 & up controls. 18-502 Chrome Motor Mount system with pre-assembled harness for stock style handlebar controls. Includes auto-cancel / lighting control module to run rear turns as running lights brake lights and turn signals. C. WINGED BILLET IGNITION SWITCH HOUSINGS 17-126 Mounts to most FXR style top motor mounts that do not have threaded mounting holes. It houses the 1996 & up Fat Bob style ignition switch (with removable barrel key) usually found between Fat Bob style gas tanks. Chromed billet construction. Ignition Switch not included. SOLD EACH
E. BILLET IGNITION SWITCH HOUSING WITH COIL BRACKET 18-521 Mounts to most FXR style top motor mounts that do not have threaded mounting holes. Houses the 1996 & up Fat Bob style ignition switch (with removable barrel key) usually found between Fat Bob style gas tanks. For use with most coils that do not have electrical connections on the ends. Chromed billet construction. Ignition switch not included (Fits new style: Crane HI-4, Dyna 2000i Twin Fire, ect) SOLD EACH
1/61
H 3 CONTENTS 4 L
1
A
WIRE PLUS
MODULAR MOTORCYCLE WIRING SYSTEMS & ACCESSORIES A. BILLET COIL COVER
Chrome billet coil cover for use with most coils that do not have electrical connections on the ends. Mounts to most FXR style top motor mounts that do not have threaded mounting holes. Chromed billet construction. (Crane HI-4, Dyna 2000i Twin Fire, ect) SOLD EACH B. WIRE PLUS ACCESSORIES 17-130 Ignition switch housing for motor mount SOLD EACH applications. Includes three position switch. 18-515 Auto cancel turn signal module with load SOLD EACH equalization. 18-518 High/low latching module (momentary SOLD EACH input with latching output). 18-519 Switch control module. Provides latching SOLD EACH circuits for momentary (petite) style switches with auto cancel. 18-520 Lighting control module. Provides autoSOLD EACH cancel circuit with turn signals as running and brake lights with modulation. 89-287
C
89-608
1/62
H 3 CONTENTS 4 L
A. WIRING HARNESSES
U.S.A. MADE stock length black harnesses come in kit form and includes main wiring harness for each model. Color coded with preattached wire ends. BIG TWIN SOLD AS KIT 18-187 For 1948 thru 1957 WL, UL, FL and FLH. OEM 70321-48. 18-188 For 1958 thru 1964 FL and FLH. OEM 70321-58. 18-189 For FLH 1965 thru 1969. OEM 70321-65. 18-190 For FLH 1970 thru 1972. OEM 70320-70. 18-191 For FLH 1973 thru 1977. OEM 70320-73. 18-258 For FLH 1978 & 1979. OEM 70320-78. 18-259 For FLH 1980 thru 1984. OEM 70320-80. 18-192 For FX 1970 thru 1972. OEM 70326-70. 18-193 For FX 1973 thru 1977. OEM 70326-73. 18-260 For FXWG 1980 thru 1985. OEM 70214-80A. 18-264 Turn signal wiring kit for FL & FLH, SOLD AS KIT 1957 thru 1969. SPORTSTER 18-261 For 1968 & 1969 XLH electric start. SOLD AS KIT 18-262 For 1970 thru 1972 XLH electric start. 18-263 For 1975 & 1976 XLH electric start. 18-265 XLH auxiliary wiring harness for use in SOLD AS KIT conjunction with above main harnesses. For headlight, taillight, handlebar switches,etc.
1
A
18-331
1/63
H 3 CONTENTS 4 L
1
A
1/64
H 3 CONTENTS 4 L
A. MICRO HARNESS CONTROLLER
Thunder Heart Performance is pleased to announce the availability of their new Micro harness Controller! The Micro Harness Controller consolidates all of the electronic functions of a motorcycle (with the exception of instrumentation and engine management) into one, easyto-hide system! The Micro Harness Controller avoids the wiring birds nest of other systems so you spend less time wiring your bike...and more time riding! Perfect for choppers and saddle tank bikes, the system includes a billet aluminum controller housing, un-terminated fantail harness, shrink tubing, and all necessary connectors, and a comprehensive instruction and troubleshooting manual. The result is a durable, professional installation. 18-532 Wire Harness sold as kit
B
SOLD AS KIT
DASH LIGHT COMPONENTS 18-341 Panel for L.E.D. dash mounted lights. SOLD EACH 18-338 Panel for incandescent dash mounted lights. 18-340 Harness; 16 long for above dash panels. 18-339 Harness; 6 long for handlebar mounted indicator lights. 18-535 Relay
18-341
18-339 18-338
18-340
CAD PLATED
D. TERMINAL BLOCK
This U.S.A. MADE terminal block is another trick item for custom bikes that gives the wiring job a professional look. Available with 4 terminal studs. 10 - 24 Thread for long life. ABS base for rugged use. 17-81 Terminal block, 412 long. SOLD EACH
1/65
H 3 CONTENTS 4 L
1
A
17-120 39-144 39-147
D B. FUSE HOLDER
18-18
18-19
U.S.A. MADE fuse holder. Complete with SOLD EACH 6 of 16 gauge wire looped, and 20 amp fuse.
C. FLASHER
17-125
18-20
12V Rectangular flasher. For XL 1965 & later, FL 1965 thru 1984, FLT 1980 & later, FX 1971 & later and FXR 1982 & later.
SOLD EACH
1/66
H 3 CONTENTS 4 L
DEUTSCH CONNECTORS
A
SOLD EACH 97-305
C. DEUTSCH RECEPTACLES
REQUIRE DEUTSCH OPEN OR SOLID CRIMP PINS 2-WIRE CONNECTOR 18-569 Grey, OEM 72102-94GY. 18-601 Black, OEM 72102-94BK. 3-WIRE CONNECTOR 18-602 Grey, OEM 72103-94GY. 18-603 Black, OEM 72103-94BK. 4-WIRE CONNECTOR 18-604 Grey, OEM 72104-94GY. 18-605 Black, OEM 72104-94BK 6-WIRE CONNECTOR 18-606 Grey, OEM 72106-94GY. 18-607 Black, OEM 72106-94BK. 8-WIRE CONNECTOR 18-608 Grey, OEM 72108-94GY. 18-609 Black, OEM 72108-94BK. 12-WIRE CONNECTOR 18-610 Grey, OEM 72109-94GY. 18-611 Black, OEM 72109-94BK.
B
18-565 18-566
SOLD EACH
D. DEUTSCH PLUGS
REQUIRE DEUTSCH OPEN OR SOLID CRIMP SOCKETS 2-WIRE CONNECTOR 18-612 Grey, OEM 72112-94GY. 18-613 Black, OEM 72112-94BK. 3-WIRE CONNECTOR 18-614 Grey, OEM 72113-94GY. 18-615 Black, OEM 72113-94BK. 4-WIRE CONNECTOR 18-616 Grey, OEM 72114-94GY. 18-617 Black, OEM 72114-94BK. 6-WIRE CONNECTOR 18-618 Grey, OEM 72116-94GY. 18-619 Black, OEM 72116-94BK. 8-WIRE CONNECTOR 18-620 Grey, OEM 72118-94GY. 18-621 Black, OEM 72118-94BK. 12-WIRE CONNECTOR 18-622 Grey, OEM 72119-94GY. 18-623 Black, OEM 721129-94BK.
18-602 18-607
18-615
18-618
SOLD EACH
DELPHI CONNECTORS
F. DELPHI TOOLS
97-306 97-307 Removes terminals from connectors. Crimps most U-barrel terminals
SOLD EACH SOLD EACH
G. DELPHI TERMINALS
18-634 18-635 Male open crimp style. Female open crimp style.
PKG. OF 50 PKG. OF 50
1/67
H 3 CONTENTS 4 L
AMP MULTILOCK
18-655 18-656
Open crimp style pins. OEM 72038-71. Open crimp style sockets. OEM 72039-71.
1/68
H 3 CONTENTS 4 L
A. HEAT SHRINK TUBING
This U.S.A. MADE insulation tubing is the only thing to use for safe, clean, custom wiring jobs. Cut to length, thread your wires, carefully apply heat and watch what happens. The insulation shrinks to a perfect custom fit around your wires. Easy to use. Available in bulk or precut lengths. 18-91 14 x 5 Tubing. SOLD EACH 18-93 38 x 5 Tubing. 18-92 14 x 50 Tubing. 18-94 38 x 50 Tubing.
97-105
Compact and sturdy U.S.A. MADE tool that tightens and cuts cable ties in one operation. Adjustable tension control to 50 lbs. This tool works well in hard-to-get-at places. 97-105 Cable tie tool. SOLD EACH
C. ELECTRIC HORN
This air horn produces total sound output of 107 decibels. Ideally suited for application on motorcycles and autos where mounting space is limited and air horns cannot be used. Relay, brackets and hardware included in blister packed set. 16-17 Electric horn, 107 decibles. SOLD AS SET
CHROME PLATED
D
CHROME
F G
G. ELECTRIC HORN
2-1/2 dia., 12V horn, chrome. 16-24 Chrome, 12V Horn.
SOLD EACH CHROME PLATED
1/69
H 3 CONTENTS 4 L
A. TRUMPET HORN
This is a chrome plated reproduction of the original 1949 thru 1958 Pan horn and added special brackets to fit Evolutions & Shovels. With slight modifications the horn will fit all Big Twin motors. 16-31 12V Horn assy. for Softail models SOLD AS KIT 1984 thru 1990. Works with the stock exhaust system and air cleaner.
B. HORN COVER
Stock style horn cover. Chrome plated. 89-414 Fits 1986 thru 1992 Sportster and 1991 & 1992 FLT & Softail. OEM 69012-86A.
SOLD EACH
C. SINGLE HORN
CHROME PLATED
High quality chrome finish. Comes with mounting bracket. 16-21 6 Volt horn. 16-22 12 Volt horn.
SOLD EACH
B C
CHROME PLATED
E. CIGARETTE LIGHTER
Cigarette lighter and mounting bracket, with wire. 18-83 Cigarette lighter; fits any bike.
SOLD EACH
F. SKULL KROMETS
A decorative fastener that can be used anywhere on the bike but is best suited for license plate mounting. The finish and detail of the skull is top quality. Comes with removable stud, nut, lock and flat washer. 1 High, 58 wide. 14-20. CHROME SKULLS 41-960 Painted Black eyes. SOLD EACH 41-961 Purple jeweled eyes. 41-962 Indigo Blue jeweled eyes. 41-963 Crimson Red jeweled eyes. 41-964 Emerald Green jeweled eyes. 41-965 Golden jeweled eyes. GOLD SKULLS 41-966 Painted Black eyes.
CHECK QUANTITY DISCOUNT FOR BEST PRICE SEE SECTION 14 FOR BIG DADDY SKULLS SOLD EACH
CHROME PLATED
1/70