Professional Documents
Culture Documents
Click To Edit Master Subtitle Style
Click To Edit Master Subtitle Style
4/30/12
1. FJSCXXBUFXY1
Feedback: Rx and above drive strength cells need auxiliary M2 connection with boundary layer. For Yx type cell wiring width need to be 0.12um or maximum possible.
4/30/12
4/30/12
4/30/12
Modification: The cell was modified according to FVD feedback as shown below.
4/30/12
3.FJSCXXINVXY1
Feedback: Two another M2 is necessary. Addition of two M2 is required Reason: Mistake
4/30/12
4/30/12
Feedback: It is possible to put high priority secondary label M1_2V. Reason: Mistake
4.FJSCXXNOR4BBBXCA
4/30/12
4/30/12
5. FJSCXXON22X Feedback: The Nch side B1 diffusion contact can be increased from 1 piece to 2 pieces. Reason: Mistake
Modification: The cell was modified according to FVD feedback as shown below.
4/30/12
6. FJSCXXNAND4BXPA
Feedback: Increase the metal width to .1um Reason: Mistake
4/30/12
Modification: The cell was modified according to FVD feedback as shown below.
4/30/12
Modification: The cell was modified according to FVD feedback as shown below.
4/30/12
8. FJSCXXXOR4XB1
Feedback : When move metal1,then it is possible to put M1_2V. Reason: Mistake FJSCXXXOR4XB1: Before Modification
4/30/12
Modification: The cell was modified according to FVD feedback as shown below. FJSCXXXOR4XB1: After Modification.
4/30/12