Professional Documents
Culture Documents
Certificate of Calibration: Whitlock Instrument
Certificate of Calibration: Whitlock Instrument
Certificate of Calibration
Certificate Number:G232094:1287150951 Customer ID:10340
This instrument listed below was calibrated for the following Customer:
4023 S C.R. 1282 Odessa, TX 79765 (432)-563-3390 Perma-Cal Manufacturer: Model Number: Description: Asset Number: Serial Number: N/A
Instrument Received: IN TOLERANCE Instrument Returned: IN TOLERANCE Temperature: Humidity: Calibrated By: 23.37 C 34.1 % Ray Garcia
Procedure Name:Pressure Gauge 500 PSI 1/4% FS Accuracy CAL VER Procedure Rev: $Revision: 1.0 $
Notes: Whitlock Instrument certifies that the above listed instrument meets or exceeds all specifications as stated in the referenced procedure (unless otherwise noted). It has been calibrated using measurement standards traceable to the National Institute of Standards and Technology (NIST), or to NIST accepted intrinsic standards of measurement, or derived by the ratio type of self-calibration techniques. This calibration complies with MIL-STD-45662A and ANSI/NCSL Z540.1-1999 (R2002). This report may not be reproduced, except in full, unless permission for the publication of an approved abstract is obtained in writing from the calibration organization issuing this report. The Data Type that could be found in this certificate is interpreted as follows: AS FOUND - The instrument needed adjustment and/or repair. AS LEFT - The instrument was adjusted and/or repaired. AS FOUND-AS LEFT - The instrument was calibrated without any adjustments and/or repairs.
Standards Used
Asset # 97581 Manufacturer Ametek Model Number T-150 Description Dual Piston Deadweight Tester Serial Number(s) 97581 Cal Date 11/18/2009 Due Date 11/19/2010
Test Results
Test Description
Applied Pressure = 100 PSI 100.0 psi Applied Pressure = 200 PSI 200.0 psi Applied Pressure = 300 PSI 300.0 psi Applied Pressure = 400 PSI 400.0 psi Applied Pressure = 500 PSI 500.0 psi 500.00 498.75 501.25 psi Pass 400.00 398.75 401.25 psi Pass 300.00 298.75 301.25 psi Pass 199.00 198.75 201.25 psi Pass 100.00 98.75 101.25 psi Pass
Test Result
Lower limit
Upper limit
Units
Pass/Fail
TUR
CALIBRATED BY:
Form Revision : 1.0 : 03/10 c:\metcal\AsFound_AsLeft_Report_w_DATA.rpt
Page 1 of 1