Professional Documents
Culture Documents
Form U-Dr-1 User'S Design Requirements For Single Chamber Pressure Vessels
Form U-Dr-1 User'S Design Requirements For Single Chamber Pressure Vessels
Form U-Dr-1 User'S Design Requirements For Single Chamber Pressure Vessels
): National Board Registration Required: Yes No Canadian Registration Required: Yes No Operator: Country of Installation: Liquid Level: Specific Gravity: Length, Tangent-to-Tangent: Special Service: Lethal (L) Direct Firing (DF) Unfired Steam Boiler (UB) Minimum Pressure Maximum Pressure State/Province of Installation: Item No.: Type: Vertical Horizontal Sphere City of Installation:
Overpressure Protection: Valve Rupture Disk Other System Design Minimum Temperature Maximum Temperature
OPERATING CONDITIONS: Case 1 Case 2 DESIGN CONDITIONS: Internal Design Pressure: External Design Pressure: MAWP Internal: MAWP External: Minimum Design Metal Temperature (MDMT) Case 1 Minimum Design Metal Temperature (MDMT) Case 2 Corrosion Allowance: Shell Int. Cyclic Service: Yes Wind Loading: UBC Other ASCE 7 IBC None No Ext.
Pressure
Temperature
Same as Design Pressure Same as Design Pressure Deg @ Deg @ Heads Int. Ext. Nozzles Int. Ext. Jacket Int. Ext. Int. Coil
Calculated by Manufacturer: Calculated by Manufacturer: Due to: Due to: Process Other Ambient Temperature
Ext. years
Process Other Ambient Temperature Supports Internals Corrosive Service? Int. Ext. Yes No Yes No Elevation
Exposure Category
Seismic Loading: ASCE 7 UBC IBC Other None Insulated: Yes No By Manufacturer By Others
Thickness
Skirt
Fireproofing: Yes No MATERIALS Component Ellipsoidal Head Torispherical Head Conical Head Flanges
Type:
Rating (hr):
Component Shell Hemispherical Head Toriconical Head Nozzles Stiffener Rings Attachments Reinforcing Pads Description
Specification
Specification
Pressure Retaining Bolts Internals Other Number Required Size Flange Type NOZZLE SCHEDULE Class Description Number Required Size Flange Type Class
05/08
JOINT LOCATION UW-3 Category A Category B Head-to-Shell Other Category C Body Flanges Nozzle Flanges Category D
BODY FLANGE REQUIREMENTS Description Type Facing/Surface Finish Gasket Style Joint Assembly (See ASME PCC-1)
SKETCH
GENERAL NOTES
CERTIFICATION We certify that the statements made in this form are accurate and represent all details of design as per the user or his designated agent [see U-2(a), Footnote 4]
Registration Identification:
(Optional)
03/08