Professional Documents
Culture Documents
Piston - Groove Dimensions + - : Disclaimer
Piston - Groove Dimensions + - : Disclaimer
Piston - Groove Dimensions + - : Disclaimer
groove diameter (mm) groove width (mm) radius (mm) inner diameter stretch at inst (%)
+ Steel (Ck45 etc.) 20 98.00 0.054 97.70 -0.036 93.20 0 3.59 0.2 0.2 0
Application Sealing principle design temperature (C) movement pressure compression (%) Results at Installation Piston Design Groove 21 static over pressure 20
O-Ring compound chemical volume swell (%) inner diameter (mm) cross section diameter (mm) NBR 0 90 3
0.76 0.1
min. 10.36 13.79 2.59 min. 10.36 13.79 2.59 2.40 0.17 2.65 2.21 0.00
nom. 16.30 20.00 3.56 nom. 16.30 20.00 3.56 2.40 0.15
max. 19.57 31.85 4.44 max. 19.57 31.85 4.44 2.47 0.21 25.79 2.68 0.42
Calculated Values at Centrical Position of Piston: O-Ring Compression (%) Free Groove Volume (%) O-Ring Inner Diameter Stretch (%) Results at Service Calculated Values at Centrical Position of Piston: O-Ring Compression (%) Free Groove Volume (%) O-Ring Inner Diameter Stretch (%) Groove Depth incl. Gap (mm) Sealing Gap (mm) Calculated Values at Excentrical Position of Piston: O-Ring Compression (%) Groove Depth incl. Gap (mm) Sealing Gap (mm) Comments Results at Installation Results at Service Disclaimer
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data have been obtained by tests we consider as reliable. We don't assure that the same results can be obtained in other laboratories, using different conditions by the preparation and evaluation of the samples.