Professional Documents
Culture Documents
STDesign 3
STDesign 3
Openings: None.
Natural Axis Loads Vu: 200.0 kN Mux: 0.0 kN-m Muy: 0.0 kN-m Stresses Maximum shear stress, vu: 0.5668 MPa at x = 375.0 mm, y = 0.0 mm
Critical Section Perimeter, b0: 2352 mm Principal Axis Properties Centroid coordinate, e1: 0.0 mm Centroid coordinate, e2: 0.0 mm Section moment of inertia, I1: 2.4651010 mm4 Section moment of inertia, I2: 2.4651010 mm4 Principal axis rotation, (theta): 0.0 degrees Moment fraction, v1: 0.400 Moment fraction, v2: 0.400 Principal Axis Loads Vu: 200.0 kN Mu1: 0.0 kN-m Mu2: 0.0 kN-m Shear resistance, vn (concrete only): 1.970 MPa Shear resistance, vn (upper limit): 2.047 MPa
Outer Critical Section (d/2 outside of reinforced zone): N/A Design Comments: Studrails are not required. The maximum factored shear stress, vu, is only 0.5668 MPa, but the resistance without Studrails, vc, is 1.970 MPa.
ELEVATION VIEW