Professional Documents
Culture Documents
Students How To Set Up Simulation Profiles
Students How To Set Up Simulation Profiles
How to Setup a Simulation Profile in OrCAD Capture (PSpice Student Version 9.1)
Figure 1: Make Root Go to PSpice menu in the main Capture window and select New Simulation Profile option.
Figure 2: New Simulation Profile A window will pop up asking for the name of the profile. Enter a descriptive name
Figure 3: Enter the Name Another window with analysis options will appear. You can choose the type analysis to be one of: Time Domain, AC Sweep, DC Sweep, Bias Point
Figure 4: Select Analysis Type Now you must select the library which contains models for the devices being used in the simulations
The newly setup simulation profile will appear under Simulation Profiles in PSpice Resources Right-click on the desired simulation profiles, you are presented with options to either edit or simulate the selected profile.
Figure 6: Simulate Upon running the simulation, you will see the simulation results window Click on the Trace menu to choose which output to display
Figure 8: Perform Functions on the results Lastly, you can utilize cursors to read any specific point on the output waveforms as shown below.