Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Mega Bright, Round Type LED Lamps (5mm)

DESCRIPTION:
The 333 Mega Bright series is conventional LED Lamps utilizing higher intensity material to achieve the brightest performance. The semi-conductor materials used are: AlGalnP for (333RTSC, 333YTSC) GaN/Sic for (333B432C) InGaN/Sic for (333B472C, 333BG2C, 333PG2C, 333W2C)

GB-333 SERIES

PACKAGE DIMENSIONS
Unit: mm Tol: +/- 0.2mm 5.9

f5.0

ABSOLUTE MAXIMUM RATINGS: (Ta=25 C)


Reverse Voltage Reverse Current (Vr =5V) Operating Temperature Range Storage Temperature Range Lead Soldering Temperature (1.6mm (1/16)From Body) 5 Volt 100A -40oC To 85oC -40oC To 100oC 260oC For 5 Seconds
1.0 Max.

8.6 1.0

25.4 Min. 0.5 1.0 2.54 o

NOTES : 1. All dimensions are in millimeters. 2. Lead spacing is measured where the leads emerge from the package. 3. Protuded resin under flange is 1.5 mm (0.059") Max.

PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT)


Part No. Emitted Color Lens Color Peak Wavelength p (nm) 635 590 430 470 505 525
TYPICAL CHROMATICITY COORDINATES X 0.31 Y 0.32

Vf (v) Min Max

Rec. If (mA).

Iv (mcd) Min Typ.

View Angle 2q1/2(Deg) 16 16 16 16 16 16 16

GB-333RTSC GB-333YTSC GB-333B432C GB-333B472C GB-333BG2C GB-333PG2C GB-333W2C

Ultra Red Ultra Yellow Blue Blue Bluish Green Pure Green White

Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear

2.0 2.0 2.8 2.8 2.8 2.8 3.0

2.8 2.8 4.5 4.5 4.5 4.5 4.5

20 20 20 20 20 20 20

3800.0 3600.0 75.0 1750.0 3000.0 3000.0 3000.0

4200.0 4800.0 120.0 2800.0 5000.0 5000.0 5000.0

CAUTION: Handing with care against static electricity

TESTING CONDITION FOR EACH PARAMETER :


PARAMETER: REVERSE VOLTAGE REVERSE CURRENT FORWARD VOLTAGE LUMINOUS INTENSITY VIEWING ANGLE RECOMMENDED OPERATING CURRENT SYMBOL Vr Ir Vf Iv 2q1/2 If (Rec) UNIT VOLT A VOLT MCD DEGREE mA TEST CONDITION Vr = 5.0 Volt If = 20mA If = 20mA If = 20mA

0o

10o

20o 30o

C 1.0 0.9 0.8 0.7 40o 50o 60o 70o 80o 90o 0.5 0.3 0.1 0.2 0.4 0.6

NOTE : The typical emission color (White) is described by the chromaticity coordinates X=0.31, Y=0.32 using the C I E Chromaticity Diagram.

SPATIAL DISTRIBUTION

You might also like