Professional Documents
Culture Documents
RF Gun Config - in Simple Steps
RF Gun Config - in Simple Steps
Place RF Gun on Docket and connect with PC (Make sure that Windows Mobile Center is installed on the PC to which you wish to connect) You can install Windows Mobile Center from software shelf: Application Name WINDOWS MOBILE DEVICE CENTER (ACTIVESYNC) 32 64 . It should be installed without any approval. If is not installed you can raise ticket to Remote Desktop team & can talk to someone from software installation team to install the same.
2. Windows Mobile Center will be Launched on the PC 3. Click on Connect without Setting up your device
4. Click on File Management and then Browse the content of your device
You may also open the content directly from Window Explorer 5. In the Explorer you would fine a device Called Windows CE
6. Delete all the contents from Folder Application and Platform only .Press Shift +Delete to Delete is permantly
Hit Yes on the message above. 7. Click on Skip All in case a message below occurs
8. Copy Contents of Application folder from your PC to Windows CE and Platform for Platform of Windows CE
10.
Click on and hit Yes Repeat the same for Application Folder Remove the RF Gun from docket station and Warm Boot the Device. After warm boot ,Make sure that Telnet is pointing to Production on the Telnet Login Screen
How to Validate/Configure the Host Profile If the telnet is point to any instance other Production, please follow the steps below. 1. If the device is currently at telnet Login screen , Press Blue Key on ur RF GUN and then Press CTRL to activate ALT mode /key .Then Press the Blue Key again and then F10 This will activate the Options Menu..
4. It will ask for the admin password .Enter SYSTEM and press OK 5. Make sure the below entries are correct
Alias : SSH Test Address: cpggieamwa.cummins.com Port : 10210 Then Hit Save.. NOTE: Admin password for Apps Center is symbol