CEM365CB 36" Cem Black Ceramic Electric Mechanical Knobs Cooktop

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Thermador -specs/dimensions

Page 1 of 4

CEM365CB 36" CEM BLACK CERAMIC ELECTRIC MECHANICAL KNOBS COOKTOP

GENERAL INFORMATION
Approximate Shipping Weight (LBS.) Access. Griddle (AEGRIDDLE) Front Left Element (Watts) Front Right Element (Watts) Rear Left Element (Watts) Rear Middle Element (Watts) Rear Right Element (Watts) 1200 1800 Bridge 750/2200 1100/2500 1800 Bridge 45

TECHNICAL INFORMATION
208-240 Volts, 3 Wire, 60 Hz AMPS 40

DIMENSIONS (INCHES)
Overall Dimensions - A Overall Dimensions - B Overall Dimensions - C Cutout Dimensions* D Cutout Dimensions* E Cutout Width (CVS Downdraft) Cutout Width (UCV Downdraft) Cutout Depth (CVS Downdraft) Cutout Depth (UCV Downdraft) Overall Width (CVS Downdraft) Overall Width (UCV Downdraft) Overall Depth (CVS Downdraft) Overall Depth (UCV Downdraft) Set Back Min. (CVS Downdraft) Set Back Min. (UCV Downdraft) 37 21 3/8 3 5/8 34 3/4- 34 7/8 19 7/8- 20 34 3/4 34 3/4 22 7/16 22 1/8 37 37 23 3/4 23 7/8 2 1/2 2 1/2

Diagrams

http://www.thermador.com/products/specs_dimensions_popup.aspx?product_id=597

5/22/2008

Thermador -specs/dimensions

Page 2 of 4

http://www.thermador.com/products/specs_dimensions_popup.aspx?product_id=597

5/22/2008

Thermador -specs/dimensions

Page 3 of 4

http://www.thermador.com/products/specs_dimensions_popup.aspx?product_id=597

5/22/2008

Thermador -specs/dimensions

Page 4 of 4

Click Here to View Features


Note: All heights, width and depth dimensions are shown in inches. * Please refer to installation instructions prior to making cutout. Installation instructions are available at www.thermador.com. Countertop must be 26" wide overall for best fit. When the under cabinet measures 24" front to back (outside dimensions) it must be positioned so the counter top has a 1" overhang. **"BT" (Backsplash Thickness) = 0 Special Notes: The countertop must have a 25" flat area so no problems can occur with a backsplash. Important to measure it from the front edge of the countertop. All cutouts start at 2 1/2" from the front edge of the countertop. Cooktops are UL and CUL approved with the exception of the CEM365, CEM456 and CEP456 which are UL approved only.

http://www.thermador.com/products/specs_dimensions_popup.aspx?product_id=597

5/22/2008

You might also like