Professional Documents
Culture Documents
Non Return Valve
Non Return Valve
Non Return Valve
/8
Type M-SR
Sizes 6 to 30 Component series X Maximum operating pressure 35 bar Maximum flow 400 l/min
H7004
Table of contents
Contents Features Ordering code Standard types Symbols Sections Technical data Characteristic curves angle valve Characteristic curves straight valve Mounting cavity angle valve Mounting cavity straight valve Page 2 2 2 3 3 4 5 6, 7 8
Features
For installation in manifold blocks as angle valve as straight valve Leak-free closure in one direction Various cracking pressures, optional (see ordering code)
2/8
Bosch Rexroth AG
Hydraulics
M-SR
RE 20380/11.06
1X
*
Further details in clear text Seal material NBR seals FKM seals (with angle valve only) Important! Observe compatibility of seals with hydraulic fluid used!
1X = Component series 0 to 9 (0 to 9: unchanged installation and connection dimensions) Cracking pressure (see characteristic curves on pages 4 and 5) 00 = Without spring (not for straight valve) 02 = 05 = (Standard) 15 = 30 = 50 =
Standard types
Type M-SR 6 KD05-X/ M-SR 8 KE02-X/ M-SR 8 KE05-X/ M-SR 0 KE05-X/ M-SR 5 KE02-X/ M-SR 5 KE05-X/ Material number R90030889 R900357438 R900346083 R900344549 R900348943 R900345372 Type M-SR 20 KE02-X/ M-SR 20 KE05-X/ M-SR 25 KE05-X/ M-SR 30 KE05-X/ Material number R900345744 R900340979 R900344778 R90034499
Further standard types and components can be found in the EPS (standard price list).
Symbols
With spring Without spring
RE 20380/11.06
M-SR
3/8
Sections
Angle valve Straight valve
Size 8 0
2
1)
5 20 25 30
L 0,1
T1 1)
A 1
Technical data (for applications outside these parameters, please consult us!)
General
Sizes Weight Angle valve Straight valve Installation orientation Ambeint temperature range Size kg kg 6 0.05 Optional C 20 to +80 (NBR seals) 20 to +80 (FKM seals) 8 0.03 0.05 0 0.05 0.05 5 0.08 0. 20 0.4 0.2 25 0.32 0.25 30 0.47 0.3
Hydraulic
Maximum operating pressure Cracking pressure Maximum flow Hydraulic fluid bar 35 bar See characteristic curves on pages 4 and 5 l/min See characteristic curves on pages 4 and 5 Mineral oil (HL, HLP) to DIN 5524 ); fast bio-degradable hydraulic fluids to VDMA 24568 (see also RE 9022); HETG (rape seed oil) ); HEPG (polyglycols) 2); HEES (synthetic esters) 2); other hydraulic fluids on enquiry C 30 to +80 (for NBR seals) 20 to +80 (for FKM seals) mm2/s 2.8 to 500 Class 20/8/5 3)
3)
Hydraulic fluid temperature range Viscosity range Max. permissible degree of contamination of the hydraulic fluid - cleanliness class to ISO 4406 (c)
) 2)
Suitable for NBR and FKM seals Suitable only for FKM seals
The cleanliness classes specified for components must be adhered to in hydraulic systems. Effective filtration prevents malfunction and, at the same time, prolongs the service life of components. For the selection of filters, see data sheets RE 50070, RE 50076, RE 5008, RE 50086 and RE 50088.
/8
Bosch Rexroth AG
Hydraulics
M-SR
RE 20380/11.06
Flow in l/min
30 15 00
120
30
300
Flow in l/min
RE 20380/11.06
M-SR
5/8
50
30 15
Flow in l/min 7 6 5 4 3 2 1 0 Size 30 50 05 50 100 Flow in l/min Pressure differential in bar 7 6 5 4 3 2 1 0 100 05 200 Flow in l/min 300 400 30 15 150 200 15 30 Size 20 50 Pressure differential in bar 7 6 5 4 3 2 1 0 05 30 15 Size 25
Flow in l/min
50
100
200
300
Flow in l/min
6/8
Bosch Rexroth AG
Hydraulics
M-SR
RE 20380/11.06
Mounting cavity: Angle valve for plug screw to RN 13.21 (nominal dimensions in mm)
Z B T71) B
D1 D2 D33)
45
0,1 A
Rz 8 T5 T6
T44)
1
Rz 16 X Rz 8 D5 D6 D4 DH8 4 8 24 30 38 44 T8+0.2 X 8 9 24 30 43 48
T24) T3
T1
20
0,02 A A 1 Area for drain bore pN in bar 35 35 35 35 250 250 T3 38.5 43.5 50 56.5 72.5 79.5 T 20 24 26 26 28 3 D1 23 28 33 4 5 56 T5 5 8 20.5 20.5 22 22
Size 8 10 15 20 25 30 Size 8 10 15 20 25 30
)
Plug screws 2) Material no. R900002423 R900002422 R9000209 R900002424 R900024 R9000242 T1+0.1 48.5 53.5 62 7.5 90.5 99.5 T2 47.5 52.5 60.5 70 88 96.5
D5 8 0 5 20 25 30
T7+0.5 6 6 6 7 7 7
Dimension for countersinking the screw head. When installing the cartridge more deeply, extend dimension T7 accordingly. With NBR seal Pipe thread "G" to ISO 228/ Depth of fit
2) 3) 4)
RE 20380/11.06
M-SR
7/8
Mounting cavity: Angle valve for plug screw to RN 13.28 (nominal dimensions in mm)
D1 0,015 B B 0,1 B T71) Rz 16 D2 D33) Rz 8 2 T8 T44) T5 T6
30
60
0,1 A Rz 16
T24) T3
T1
Rz 16
1
X Rz 8
20
Size 25 30 Size 25 30
Plug scews 2) Material no. R900323609 R90032360 T1+0.1 06.5 5.5 T2 04 2.5 T3 88.5 95.5
pN in bar 35 35 T 45 48 D1 56+0.5 62+0.5 T5 39 39 D2 44H8 50H8 T6 33 33 D3 M42 x .5 3) M48 x .5 3) T7+0.5 5 5 DH8 38 44 T8+0.2 2 2 X 43 48 D5 25 30 D6H7 36 42 Z
)
Dimension for countersinking the screw head. When installing the cartridge more deeply, extend dimension T7 accordingly. With NBR seal Metric ISO fine thread to DIN 3 Depth of fit
2) 3) 4)
8/8
Bosch Rexroth AG
Hydraulics
M-SR
RE 20380/11.06
T5 Rz 8
45
T1 T23) T3
T43)
Rz 4
0,02 A A Size 6 8 10 15 20 25 30 Size 6 8 10 15 20 25 30 D1H7 0 3 7 22 28 36 42 T10.1 29.8 32.8 38.8 48.4 59 73 83 D2 6 8 0 5 20 25 30 T2 27.8 30.8 36.8 46.4 57 7 8
) 2) 3)
T6 Pipe thread "G" to ISO 228/ Metric ISO fine thread to DIN 3 Depth of fit D50.1 1) 3.6 7. 2.4 26.8 33.8 42.5 48.5 T5 2 2 4 6 8 20 22
45
D 2) M4 x .5 M8 x .5 M22 x .5 M27 x 2 M33 x 2 M42 x 2 M48 x 2 T6 6 6 9 2 24 26 28
D50.1 2) 4.4 8.4 22.4 27.4 33.5 42.5 48.5 Z 0.05 0.05 0.05 0.05 0.05 0. 0.
D6 25 28 34 42 47 58 65 Poppet stroke 4 4 4 5 5 7 7
Bosch Rexroth AG Hydraulics Zum Eisengieer 9786 Lohr am Main, Germany Phone +49 (0) 93 52 / 8-0 Fax +49 (0) 93 52 / 8-23 58 documentation@boschrexroth.de www.boschrexroth.de
This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be reproduced or given to third parties without its consent. The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.