Professional Documents
Culture Documents
Ip Ospf 1 Area 0: Show Spanning-Tree
Ip Ospf 1 Area 0: Show Spanning-Tree
by defaultly spanning tree is assigned to every vlan on the switch spanning tree is used for selected vlans by using spannin tree vlan 1, 10, 20-21, etc RAPID SPANNING : o Spainning- tree mode rapid-pvst
OSPF: Int s0/0 o o o No shut Clock rate 64000 Ip add 192.168.10.1 255.255.255.0
o Ip ospf 1 area 0
o Exit Int s0/1 No shut Clock rate 64000 Ip add 192.168.20.1 255.255.255.0 Exit Router ospf 1 Network 192.168.10.0 0.0.0.255 area 0 Network 192.168.20.0 0.0.0.255 area 0 -----------------------------------------------------Int f0/0 Ip ospf 4 area 146 Sh ip osp data
Debug ip ospf hell Do un all ----------------------Vlannnnnnnnnnnnnnnnnnnnn o o o Area 1 virtual-link 2.2.2.2 Area 1 virtual-ling 3.3.3.3 Sh ip ospf virtual-link
Ospf authentication
Int f0/0 o Ip ospf authent-key cisco (giving password o Ip ospf authentication (set pass word) o No ip ospf authenticao o Ip ospf authentic null Sh run int f0/0
Virtual link: Router ospf 1 o Area 146 virtual-link (destination router-id) Sh ip ospf virtual
o o o o o o o o o o On 2 router Config)# no loggine console Int s0/0 No shut Encap fram Int s0/0.1 point-to-point Ip add 192.168.100.2 255.255.255.252 Do sh frma pvc Frame-realy interface-dlci 202 Show frame pvc Spoke configurtationwr No logging console R#CONFIG)#int s0/0 No shut Encapsulation frame-relay Int s0/0.1 point-to-point Ip add 192.168.100.1 255.255.255.252 Frame-relay interface-dlci 101 Int s0/0.2 point-to-point Ip add 192.168.100.5 255.255.255.252 Frame-relay interface-dlci 102