This document summarizes ASTM standard A307-02 for carbon steel bolts and studs with a minimum tensile strength of 60,000 psi. It specifies that the bolts and studs must have a diameter between 1/4 inch to 1 inch. The standard covers three types of bolts and studs: (A) general application bolts and studs with 60,000 psi minimum tensile strength, (B) higher strength bolts and studs with tensile strength between 60,000-100,000 psi, and (C) non-headed anchor bolts conforming to ASTM A36 steel and having 11⁄2 inch diameter maximum.
This document summarizes ASTM standard A307-02 for carbon steel bolts and studs with a minimum tensile strength of 60,000 psi. It specifies that the bolts and studs must have a diameter between 1/4 inch to 1 inch. The standard covers three types of bolts and studs: (A) general application bolts and studs with 60,000 psi minimum tensile strength, (B) higher strength bolts and studs with tensile strength between 60,000-100,000 psi, and (C) non-headed anchor bolts conforming to ASTM A36 steel and having 11⁄2 inch diameter maximum.
This document summarizes ASTM standard A307-02 for carbon steel bolts and studs with a minimum tensile strength of 60,000 psi. It specifies that the bolts and studs must have a diameter between 1/4 inch to 1 inch. The standard covers three types of bolts and studs: (A) general application bolts and studs with 60,000 psi minimum tensile strength, (B) higher strength bolts and studs with tensile strength between 60,000-100,000 psi, and (C) non-headed anchor bolts conforming to ASTM A36 steel and having 11⁄2 inch diameter maximum.