This document provides instructions for making paper props for a party. It outlines a 4 step process: 1) Print pictures of props, 2) Adhere the printed pictures to foam core with spray mount, 3) Cut out the prop shapes with an exacto knife, 4) Tape a dowel to the back of each prop for display. The materials needed are listed as 8.5x11 paper, foam core, spray mount, exacto knife, tape, and dowels.
This document provides instructions for making paper props for a party. It outlines a 4 step process: 1) Print pictures of props, 2) Adhere the printed pictures to foam core with spray mount, 3) Cut out the prop shapes with an exacto knife, 4) Tape a dowel to the back of each prop for display. The materials needed are listed as 8.5x11 paper, foam core, spray mount, exacto knife, tape, and dowels.
This document provides instructions for making paper props for a party. It outlines a 4 step process: 1) Print pictures of props, 2) Adhere the printed pictures to foam core with spray mount, 3) Cut out the prop shapes with an exacto knife, 4) Tape a dowel to the back of each prop for display. The materials needed are listed as 8.5x11 paper, foam core, spray mount, exacto knife, tape, and dowels.
This document provides instructions for making paper props for a party. It outlines a 4 step process: 1) Print pictures of props, 2) Adhere the printed pictures to foam core with spray mount, 3) Cut out the prop shapes with an exacto knife, 4) Tape a dowel to the back of each prop for display. The materials needed are listed as 8.5x11 paper, foam core, spray mount, exacto knife, tape, and dowels.
Materials: 8.511 paper paper or heavy cardstock. You can also print on paper and clue to foam or cardboatd and cut out. Dowels Foam core Spray Mount Exacto Knife Tape Step One: Print out pictures of the props. Step Two: Using the spray mount adhere the paper to the foam core. Step Three: Using a sharp exacto knife cut out the shapes of the props. Step Four: Tape a wood dowel to the backside of the prop.