Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 15

Oscillators and multivibrators using opamp

SIGNAL GENERATORS /OSCILLATORS


A positive-feedback loop is formed by an amplifier and a frequency-selective network In an actual oscillator circuit, no input signal will be present
2

Oscillator-frequency stability

Wien-bridge oscillator

without amplitude stabilization


.

Phase Shift Oscillator

Phase Shift Oscillator

Bistable Operation

Bistable

Hysteresis

10

Noisy Signal

11

Limiter
(VZ2 + VD),

(b) L+ = VZ + VD1 + VD2 and L = (VZ + VD3 + VD4).

a) L+ = VZ1 + VD and L =

Limiter circuits = more precise output levels for bistable circuit. R according to current required for the proper operation of the zener diodes.
12

Astable Multivibrator

Abistable multivibrator with inverting transfer characteristics in a feedback loop with an RC circuit results in a square-wave generator.

13

The circuit obtained when the bistable multivibrator is implemented with the circuit

(This circuit is called an astable multivibrator.) c) Waveforms at various nodes of the circuit in (b).

14

MONOSTABLE MULTIVIBRATOR

(a) An op-amp monostable circuit. (b) Signal waveforms in the circuit of (a).

15

You might also like