MicroCell fault has occurred. Power is on and there are no faults. No connection. Physical connection but no IP address. No configuration. Initialization is in process. Flashes may be short or medium in length.
MicroCell fault has occurred. Power is on and there are no faults. No connection. Physical connection but no IP address. No configuration. Initialization is in process. Flashes may be short or medium in length.
MicroCell fault has occurred. Power is on and there are no faults. No connection. Physical connection but no IP address. No configuration. Initialization is in process. Flashes may be short or medium in length.
button to close this document and return to the course.
AT&T 3G MicroCell Overview
AT&T MicroCell LED Status Status Indicator Color / State Off Red/Steady Power Green/Steady Description No power. MicroCell fault has occurred. Power is on and there are no faults. No connection. Physical connection but no IP address. AT&T network connection Initial state. This state lasts for several minutes after power is connected. Searching for GPS signal and/or location fix. This follows the initial state. Location fix acquired. No connection. Ethernet link, passing traffic. Ethernet link, no traffic. No configuration. Initialization is in process. Flashes may be short or medium in length. Fault condition(s) present that impact service. MicroCell service available.
Off Ethernet (Broadband Connect) Green/Flashing
Green/Steady
Off
Green/Flashing GPS Green/Steady Off Green/Flashing PC (PC/Router Connection) Green/Steady Off Green/Flashing 3G (MicroCell Connection) Red/Flashing