Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 3

Mechanism Problems

1) A pulley system with a belt is connected to a motor which turns at 900 rpm with a driver pulley of 10cm and a driven pulley of 30cm. Work out: a) Draw the mechanism b) Calculate the velocity of the driven pulley c) Calculate the velocity ratio

2) In a pulley system with a belt we know the following data: V1 = 1000rpm; D1 =10cm; D2 =20cm. Calculate: a) The velocity of the driven pulley b) Calculate the velocity ratio

3) If we have a motor which turns at 1000rpm with a pulley of 20cm in its axle, and the driven pulley is 60cm wide, calculate: a) The velocity of the driven pulley b) Calculate the velocity ratio c) Is it a multiplying system or a reducing system?

4) If we have a motor which turns at 1000rpm with a pulley of 50cm in its axle, and the driven pulley is 10cm wide, calculate: d) The velocity of the driven pulley e) Calculate the velocity ratio f) Is it a multiplying system or a reducing system?

5) Calculate the turning speed of the pulley 2 and label the direction of the turn for each one of them. Where D is diameter of the pulley and w is the turning speed.

You might also like