Professional Documents
Culture Documents
SM Lab QP
SM Lab QP
1. Conduct the tensile test on the Mild steel specimen by using Universal Testing Machine and calculate the tensile properties. Also draw the Stress Strain Curve. 2. Calculate the Impact strength of the given specimen by conducting CHARPY Impact test. 3. Conduct the Rockwell Hardness Test and measure the hardness number of the given Specimens. 4. Determine the Modulus of Rigidity of the circular bar by using Torsion testing machine. Draw suitable graphs. 5. Conduct an experiment on the given springs by compression and calculate the stiffness and modulus of rigidity of the spring. Also draw load - deflection curvature. 6. Calculate the Impact strength of the given specimen by conducting IZOD Impact test. 7. Conduct the Brinell Hardness Test and calculate the hardness number of the given specimens. 8. Determine the Youngs modulus of the given material by using simply supported at the ends and carrying a concentrated load at the centre. Also draw load deflection curvature.
9.
Conduct an experiment on the given springs by tension and calculate the stiffness and modulus of rigidity of the spring. Also draw load - deflection curvature.
INTERNAL EXAMINER EXTERNAL EXAMINER