Professional Documents
Culture Documents
SanDisk Sansa Interface Pinout and Wiring @
SanDisk Sansa Interface Pinout and Wiring @
ru
http://pinouts.ru/PortableDevices/sandisk_sansa_pinout.shtml
Connector is JAE (Japan Aviation Electronics) DD1 series The plug is JAE part # DD1P030MA1. The pinout shown is the rear (cable connection end) view of what are 2 rows of IDC pins. These can be used with a 1mm thick pcb sandwiched between the two rows. The apparent counterintuitive offset is a result of the shape of the pin inserts themselves.
se [02] [04] [06] [08] [10] [12] [14] [16] [18] [20] [22] [24] [26] [28] [30]-[01] [03] [05] [07] [09] [11] [13] [15] [17] [19] [21] [23] [25] [27] [29]
Pin 1,2 +5V shorted to GND in USB cable Signal Description
3 and GND? 6 4 5 7 8 9 14 27 28 USB Data + USB Data Video + Audio Right (line out) Audio Left (line out) Video + Audio Right + (line out) Audio Left + (line out)
Is this document
correct or
incorrect?.
Ads by Google
9 Pin Connector
USB Connector
Connector Pins
Wiring Diagram
Pinouts.ru > MP3 players and other portable devices pinouts listing > Pinout of SanDisk Sansa interface and layout of connector
Last updated 2010-10-17 10:05:50.
This page contain parts under Copyright 2000-2011 by pinouts.ru team. No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases. Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
1 of 1
05.04.2012 10:37