A nna
pura!
DURABILITY. PERFORMANCE. RELIABILITY.About DuraMAx.
ee
Te Guess ine gen ntt (Buna nontiePotetnl de nres
Hoh rts sou seson, | emerge Tak Ou an Stanton Fore |B
environment, aggregate surfaces and |” ™ Watertight Quick Motor Disconnectors fe
multiple pool application conditions were |» Wireless Remote Control (Guidance or Automatic Modes) [ov
all taken into account in the total design + Patented BodyGUARD™ Corner Wheels “Vv
reliability and performance DuraMAX is
grade features are now available standard on _*_ Debris settling feature allows a programmable 1-hour delayed start -€&
DureMAX Harsh Environment Drive Tra
[ StayCoo!™ All: Weather-Resistant Power Supply
Valwlol
= a
All DurMAX cleaners come standard
—=,_| with EasyService™ Watertight Quick
* Motor Disconnections. This feature
-- ‘enables you to disconnect motor parts
‘without messy splicing or damage to any
important wires, enabling in-the-field
‘on-the-spot motor replacement- without
the need to send an entire cleaner out for
service repair.
Patented BodySUARD™
Corner Wheels
DuraMAX Harsh
Environment Drive Tai
DureTRAX™ Long Last
Durable Direct Drive Tracks
Located on the inside ofthe bottom lid andnear the vacuum
intake port is the Vacuum Port Velocity Adjustment. f the
selector switch is moved towards the “LESS” markings the
inet flaps will be kept from fully opening. This will increase ‘Separate Individually Sealed Single All Surface DeepClean’
‘the suction power ofthe cleaner, which is ideal for removal Pump andTwo Drive Motors ‘Super Brushes
of fine silt and pollen and heavy sand,Durable Lightweight 120’ / 150’ Thermoplastic Rubber Encased 16 Gauge 1/2" Diameter 2 Wire Buoyant Cable
(DuraMAX Trio: 3/4” (16 gauge, 4 wire) Cable)
Each Body Contains a 34 /45 Quart Capacity, High Strength, Mildew Resistant Reusable MicrofilterBag
‘Vacuum Port Extensions Lowers the Suction Points For Enhanced Removal of Embedded Dirt: Ideal for Porous Surfaces (on select units)
‘Vacuum Port Velocity Adjustment Increases Suction Flow: Ideal for Heavy Sand and Fine Silt and Pollen Removal (on select units)
Largest Debris Intake Ports of Any Cleaner Accommodate The Largest Debris and Are Offset To Avoid Clogging (on select units)
NoverStuck™ Rollers with Center Concave Point for Traversing Anti-Entrapment Main Drains (an select units) (ASME/ANSI Standards
‘Vacuum Port Extensions lowers Power Washing/Hydroscrubbing
the suetion points for enhanced Jets help push debris towards
removal of embedded cit, the intake porte.
silt and sand: idea! for porous
surfec
The pa
washing jet f
‘of the pump motors propeller resides an
impellor with a small pump housing around
it. This forces filtered water under high
pressure to then be thrusted through tubes
to eject the water underneath the cleaner as
HydroScrubbing power wi
NoverStuck®
rollers protect
the undercarriage
and roll over
and rollover ,, Each body contains a 34/45 Quart
J high strength, mildew
Resistant Rousable Microfilter Bag
‘and largest debris Intake Ports
‘of any cleaner accommodate the
largest debris and are offset to avoid
clogging,
L__.-304’ Stainiess Stee! 1/2" Diameter Full Length Axle Cores