Professional Documents
Culture Documents
Wiring Diagram and Special Instructions
Wiring Diagram and Special Instructions
Before carrying any welding activity, ensure spark plug cable removed
and remove Battery terminal cables. This will prevent burning of wiring harness and HT Coil.
Do not tamper Engine Intake System including Air Filter & its Position.
Tampering Intake system will reduce power and may yield in misfiring during vehicle retardation.
Fill the measured quantity of luboil from the Rocker Cover Filling Cap,
wait for 10 minutes to allow oil to reach bottom portion in crankcase and then measure the level. If necessary, drain the excess oil by loosening side drain plugs. Luboil level must be between lower and upper mark of Dipstick. Level to be checked when vehicle on horizontal road.