Professional Documents
Culture Documents
Proper Wrist Strap Checking
Proper Wrist Strap Checking
Wrist straps Uses conductive cuffs and a ground cord with a built-in 1 mega ohm resistor for electrical hazard protection Must be properly grounded and make contact with the skin!!! Should not be dirty or loose People with dry skin might need to use lotion or DI water Should be tested periodically (every start of the shift)
Pass P as s Fail F a il
LO
HI O K
Note : Shake your hands while wrist strap testing. No intermittent reading shall be observe. If found reading inconsistent reading (pass/fail) report immediately for your group leader for immediate replacement