Professional Documents
Culture Documents
BSC Clear Codes and Phases
BSC Clear Codes and Phases
More information about BSC clear codes and phases is available in document Call Related DX-Causes in BSC in the BSC documentation library. Note During the creation of the plan for Clear Code Observation measurement type of BSC, select at least one additional parameter (BTC/BSIC).
Phases Table: BSC clear codes and phases Dec Hex Phase 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0x1 Paging/Initial MS (CCCH and SDCCH or TCH) 0x2 MM-signalling (SDCCH or TCH) 0x3 Basic assignment (SDCCH or TCH) 0x4 Release (SDCCH or TCH) 0x5 FACCH assignment (TCH) 0x6 SMS- establishing (TCH) 0x7 SMS- establishing (SDCCH) 0x8 Ciphering (SDCCH or TCH) 0x9 External HO (SDCCH or TCH, source) 0xA Internal HO Intra (SDCCH or TCH, source) 0xB Internal HO Inter (SDCCH or TCH, source) 0xC External HO (SDCCH or TCH, target) 0xD Internal HO Intra (SDCCH or TCH, target) 0xE Internal HO Inter (SDCCH or TCH, target) 0xF Conversation.
Successful causes (cause in or cause out in observations) Table: Successful causes Value Release Cause 10 20 21 22 23 24 25 26 27 40 41 42 43 44 45 46 S6 S6 S7 Location update FACCH emergency call FACCH re-establishment FACCH answ er to paging FACCH mo speech call FACCH mo data call FACCH other procedure FACCH calls, for w hich the establishment cause is a mobile terminating data call. Number of IMSI detaches on the TCH channel due to SDCCH congestion. Basic emergency call Basic re-establishment Basic answ er to paging Basic mo speech call Basic mo data call Basic other procedure Basic calls, for w hich the establishment cause is a mobile terminating data call.
46 47 80 81 82 83 84 85 86 87 88 89 90 91 92 93 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117
S6 S7
Basic calls, for w hich the establishment cause is a mobile terminating data call. Number of IMSI detaches on the SDCCH channel. External incoming ho uplink quality External incoming ho uplink strength External incoming ho dow nlink quality External incoming ho dow nlink strength External incoming ho distance External incoming ho O&M intervention External incoming ho response to MSC invocation External incoming ho better cell External incoming ho directed retry External incoming ho unexpected
S6 S8 S8 S10.5
Incoming external handover attempt for changing the A interface circuit pool. Incoming external handover. The handover set-up cause is preemption. Incoming external handover. The handover set-up cause is a BSC traffic reason handover. Incoming external inter-system handover. External outgoing ho dow nlink RX level External outgoing ho uplink RX level External outgoing ho dow nlink RX quality External outgoing ho uplink RX quality External outgoing ho dow nlink interference External outgoing ho uplink interference External outgoing ho distance External outgoing ho pow er budget External outgoing ho umbrella External outgoing ho forced External outgoing ho directed retry External outgoing ho traffic reason External outgoing ho intelligent directed retry External outgoing ho pre-emption
S6 S6 S6 S6
Outgoing external handover. The handover set-up cause is a rapid field drop. Outgoing external handover. The handover set-up cause is a low distance (extended cell radius feature). Outgoing external handover attempt for changing the A interface circuit pool. Outgoing external handover. The handover set-up cause is a Slow Moving MS in the Macro Cell. The slow moving detection is based on the received measurement of adjacent micro cells and on the umbrella like handover criteria. Outgoing external handover. The handover set-up cause is the low speed of the MS. The slow moving detection is based on the MS speed indications sent by the BTS. Outgoing external handover. The handover set-up cause is the high speed of the MS. The fast moving detection is based on the MS speed indications sent by the BTS. Internal inter ho dow nlink RX level Internal inter ho uplink RX level Internal inter ho dow nlink RX quality Internal inter ho uplink RX quality Internal inter ho dow nlink interference Internal inter ho uplink interference Internal inter ho distance Internal inter ho pow er budget Internal inter ho umbrella Internal inter ho forced Internal inter ho directed retry Internal inter ho traffic reason
118 119 120 121 122 123 124 125 126 127 128 129 130 131 132
S6 S6
Internal inter ho intelligent directed retry Internal inter ho pre-emption Internal inter handover. The handover set-up cause is a rapid field drop. Internal inter handover. The handover set-up cause is a low distance (extended cell radius feature). Internal inter handover. The handover set-up cause is an OK C/I ratio (Underlay-overlay handover). Internal inter handover. The handover set-up cause is a bad C/I ratio (Underlay-overlay handover). Internal inter handover. The handover set-up cause is a Slow Moving MS in the Macro Cell. The slow moving detection is based on the received measurement of adjacent micro cells and on the umbrella like handover criteria. Internal inter handover. The handover set-up cause is the low speed of the MS. The slow moving detection is based on the MS speed indications sent by the BTS. Intra ho dow nlink interference Intra ho uplink interference Intra ho forced S6 S6 S6 S6 S6 Internal intra handover. The handover set-up cause is the dow nlink RX quality. Internal intra handover. The handover set-up cause is an OK C/I ratio (Underlay-overlay handover). Internal intra handover. The handover set-up cause is a bad C/I ratio (Underlay-overlay handover). Internal intra cell handover. The handover set-up cause is pre-emption handover. Intra cell handover from a normal area to an extended area. Intra cell handover from a normal area to an extended area is performed w hen the timing advance (TA) of the MS is equal to or more than the parameter maxMSDistanceHOThreshold defines. Intra cell handover from an extended area to a normal area. Intra cell handover from an extended area to a normal area is performed w hen the timing advance (TA) of the MS is equal to or less than the parameter minMSDistanceHOThreshold defines. Assignment attempt from a SDCCH to a super-reuse frequency. The counter indicates the number of successful internal intra-cell handovers from a dedicated control channel to a super-reuse TRX. Handover set-up cause is the direct access procedure. An internal inter handover. The handover set-up cause is the high speed of the MS. The fast moving detection is based on the MS speed indications sent by the BTS. Handover cause for Enhanced Field Drop handover. The counter indicates the number of successful internal inter-cell handovers from a dedicated control channel to a super-reuse TRX. Handover set-up cause is the direct access procedure. Internal inter handover w hose set-up cause is a BSC traffic reason handover. Internal inter handover w hose set-up cause is the Direct Access to Desired Layer/Band feature. Handover cause for Enhanced Field Drop handover. Outgoing external handover w hose set-up cause is a BSC traffic reason handover. TCH-TCH handover from an UltraSite BTS to a Talk Family BTS due to load reasons w ithin a segment. SDCCH-SDCCH handover started based on SDCCH reservation duration from an UltraSite BTS to a Talk Family BTS w ithin a segment. Intra cell handover made to enable an HSCSD upgrade. TCH-TCH handover from non-BCCH frequency layer betw een BTSs on different frequency bands of a segment due to w eak dow nlink signal level.
S6
148
S6
149 150 156 157 158 159 160 163 164 166 167 168 169
Unsuccessful causes: (cause out in observations) Table: Unsuccessful causes Value Release Cause 300 301 302 303 304 305 306 307 Channel blocking caused by the user. Channel blocking caused by the netw ork Channel blocking caused by BTS failure. Channel blocking caused by LAPD failure. Channel blocking caused by Abis failure. The packing of the Abis interface message fails. The Abis interface receives an ASSIGNMENT_FAILURE message from the MS during a Basic Call. Channel blocking caused by some other reason than the ones given above.
308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344
The Abis interface receives a CHANNEL_ACTIVATION_NACK message or its contents have been corrupted. The Abis interface receives a CHANNEL_ACTIVATION_NACK message, and the cause is "O&M intervention". The Abis interface receives a CHANNEL_ACTIVATION_NACK message, and the cause is "equipment failure". The Abis interface receives a CHANNEL_ACTIVATION_NACK message and the cause is an "encryption algorithm not supported". The Abis interface receives a CHANNEL_ACTIVATION_NACK message and the cause is "radio channel already allocated". The Abis interface receives a CHANNEL_ACTIVATION_NACK message and the cause is that the "service is not available". The Abis interface receives a CHANNEL_ACTIVATION_NACK message and its contents have been corrupted or a timer expires w hile w aiting for the message. The Abis interface receives a CONNECTION_FAILURE message. The Abis interface receives a CONNECTION_FAILURE message and its cause is "radio interface failure". The Abis interface receives a CONNECTION_FAILURE message and its cause is "radio link failure". The Abis interface receives a CONNECTION_FAILURE message and its cause is "remote transcoder failure". The Abis interface receives a DATA_INDICATION message w hose contents have been corrupted. The Abis interface receives an ERROR_INDICATION message. The Abis interface receives an ESTABLISH_INDICATION message w hose contents have been corrupted or a timer expires w hile w aiting for the message. The Abis interface receives an ESTABLISH_CONFIRM message. The contents of the message have been corrupted or a timer expires w hile w aiting for the message. The handover has failed and the MS returns to the source channel. The MS has sent an assignment failure or a handover failure message to the netw ork during the handover. The Abis interface receives an HO_DETECT message. The contents of the message have been corrupted or a timer expires w hile w aiting for the message. The Abis interface receives a MODE_MODIFY_NACK message. The Abis interface receives a MODE_MODIFY_ACK message w hose contents have been corrupted or a timer expires w hile w aiting for the message. No measurement result messages from the BTS. Timer expires because the co-process does not respond. A BSC internal failure. The Abis interface receives a PHYSICAL_CONTEXT_CONFIRM message. The contents have been corrupted or a timer expires w hile w aiting for the message. The Abis interface receives an RCS_ALGORITHM_START_ACK message w hose contents have been corrupted or a timer expires w hile w aiting for the message. BSC internal signalling. The Abis interface receives an RCS_ALGORITHM_CLEAR_ACK message w hose contents have been corrupted or a timer expires w hile w aiting for the message. BSC internal signalling. The Abis interface receives an RCO_DISCONNECT_IND message from RC0. The Abis interface receives an RF_CH_REL_ACK message w hose contents have been corrupted or a timer expires w hile w aiting for the message. The Abis interface receives a RELEASE_INDICATION message. The Abis interface receives a RELEASE_INDICATION message. The contents of the message have been corrupted or a timer expires w hile w aiting for the message. DTAP signalling fails. An attempt to activate a blocked channel in the Abis interface. An attempt to activate a channel w ith the w rong information in the Abis interface. Forced TCH release. Rejected phantom reservations caused by the w rong establishment cause in the channel required message from the MS or a too long distance betw een the MS and the BTS. Overload message from the BTS. The BCSU sw itchover has been started. During the SMS establishment the Abis interface receives a RELEASE_INDICATION message or the ESTABLISH_INDICATION message received has been corrupted. The Abis interface receives an MS_PAGING message and the channel has been blocked.
345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 S6 S6 S6 S6 S6 S6 S6 S6 S6 S7 S7 S7 S7 S7 S7 S7 S7 S7 S7 S7
The Abis interface receives a CHANNEL_REQUIRED message w hose contents have been corrupted. The Abis interface receives a MODE_MODIFY_NACK message w ith the cause "equipment failure". The Abis interface receives a MODE_MODIFY_NACK message w ith the cause "requested transcoding/rate adaption not available". The Abis interface receives an RRM_CH_SERV_REQ_NACK message. The Abis interface receives a CH_MODE_MODIFY_ACK message and the mode has not been the same as the mode requested. Timer expires w hile w aiting for the ASSIGNMENT_COMPLETE message. Directed retry procedure fails. A failure has occurred in co-process. An ERROR_REPORT message is received from BTS and the cause is "encryption algorithm not implemented". An ERROR_REPORT message received from the BTS. The Abis interface receives a CHANNEL_ACTIVATION_NACK message and the failure cause is either the "not implemented unspecified" or "mandatory IE error". The Abis interface receives a CHANNEL_ACTIVATION_NACK message and the failure cause is the "general IE error". The Abis interface receives an assignment_failure message or handover_failure message from the MS during an assignment or handover and the RR cause is channel mode unacceptable. When random access buffering is used in an extended range cell, if tw o incoming random accesses have the same frame number, the latter one is ignored. Reconfiguration of a dynamic SDCCH resource has been failed at the time of the immediate assignment. All of the SDCCH resources under the control of the BCSU are already in use. If an assignment procedure is started before the MS is assigned to move to a new channel, the handover attempt is terminated w ith DX cause ho_interrupted_c. Number of channel releases caused by a dow ngrade. Number of HO starts rejected due to other ongoing procedures. Number of upgrades, dow ngrades and ALAs rejected due to other ongoing procedures. Number of failed configuration changes due to mode modify NACK or no answ er from the BTS. Number of failed configuration changes due to configuration change reject or no answ er from the MS. Number of channel releases caused by a failure in another channel in the HSCSD configuration. Number of timer expires due to sub-channel not responding to the main channel in the HSCSD connection. Number of TCH pre-emption releases. Number of upgrade procedure failures. Causes set by the Radio Connection Supervision Program Block (RCSPRB).
S10
Number of the ESTABLISH_INDICATION messages w hich the Abis interface receives because of the corrupted contents of the message. The call is released after the distance betw een the MS and the BTS has reached the maximum value allow ed, i.e. the MS has exceeded the planned cell boundaries.
S6 S6 S7 S7
The Radio Resource Management Program Block (RRMPRB) w ill set this cause in the TCH resource request negative acknow ledgement message in order to indicate the A interface circuit pool change request. The requested speech version is not supported by the target BTS. Resource that is not supported by BTS has been requested. Resource that is not supported by MS has been requested. Causes set by the A interface Signalling Program Block in BSC (AIVPRB).
S8
The traffic channel allocation in the external handover has failed. The Handover Request message received by the BSS indicates a target cell w hich is not controlled by the BSS. External handover w as not allow ed during a FACCH call set-up, external DR handover w as disabled, or all candidate cells for an external handover w ere n-areas of the extended cells. No radio resources in the BTS for channel reservation during handover signalling. Signalling w ith the internal processes has failed during handover signalling. Target channel reservation has failed during handover signalling. No answ er to the radio resource request. Target channel reservation has failed. Channel activation acknow ledgement has not been received, a timer for that has expired. No clear command has been received from the A interface during external source handover signalling.
No clear command has been received from the A interface during external source handover signalling. The timer t3107, t3103 or t9113 has expired. The assignment complete or handover complete message has not been received. The MS has not established a channel to the target side. Problems in sending the handover performed message by the BSC. Sw itchover has been started and the handover has failed. Failure in the target channel. Failure in the source channel. The master has failed to create a hand. The handover attempt w as interrupted w hen the BSC noticed that the target cell information (BCCH frequency and/or BSIC) received in the handover command message from the MSC is not correct. This counter indicates that information in the source BSS Radio Netw ork Configuration Database concerning adjacent cells is w rong. Activation of a hand process fails in the AIVPRB master. SCCP connection establishment is not possible because the subsystem is in the prohibited status. The situation is detected by the AIVPRB master. SCCP connection establishment fails. A CREF message is received from the MSC. No response from the MSC to the SCCP connection establishment. Abnormal release of the SCCP connection (RLSD received). State change of an SCCP subsystem or a RESET message from the MSC. No DTAP message from the MSC after a successful SCCP connection establishment. Starting the handover is not allow ed because an assignment procedure is in progress. Starting the handover is not allow ed because the ciphering procedure is in progress. Starting the handover is not allow ed because the call clearing procedure is in progress. Starting the external SDCCH handover is not allow ed because the SCCP connection establishment is not complete. Expiry of the GSM timer T7. Expiry of the GSM timer T10. Timeout in the AIVPRB w hile allocating an A interface speech circuit. Timeout in the AIVPRB w hile connecting an A interface speech circuit. Timeout in the AIVPRB w hile disconnecting an A interface speech circuit. Timeout in the AIVPRB w hile releasing an A interface speech circuit. Timeout in the AIVPRB in BSC internal communication. The BSC internal supervision timer, w hich supervises the communication betw een the Abis and the A interface, has expired. An erroneous message, w hich leads to the clearing of the call, has been received from the MSC. S6 S6 Message received concerning an unknow n A interface circuit. Handover is denied w hen the AIVPRB receives the handover inquiry message from the Handover Attempt Supervisor Program Block (HASPRB) w ith the cause "sw itch circuit pool" and there is no proper A interface circuit fitting in w ith the pool list of the inquiry message. The radio interface data rate requirement is totally contradictory to the TCH channel rate request of the channel type IE included in the normal Assignment Request or Handover Request. In the Assignment Request related to the In Call Modification or the FACCH call set-up, the TCH channel rate request or the data rate request are totally contradictory to the type of TCH w here the call is maintained. The TCH type requested by the MSC is not supported. The speech coder version requested by the MSC is not supported. A paging message is received from the MSC w hen the BCSU unit load is too high. The load is observed by the number of unhandled messages in the unit. Timeout in the connection refreshing procedure. The connection refreshing procedure has failed. The RC0PRB master fails to activate a hand process. Assignment of a speech circuit w hich has already been allocated. Connection error in marker w hile connecting an A interface speech circuit. Timeout in the RC0PRB w hile connecting an A interface speech circuit. Requested speech circuit not found in the circuit control table. Circuit release error in marker w hile releasing an A interface speech circuit. The requested channel rate corresponding to the A interface circuit pool has not been defined on the A
600 601 602 603 604 606 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623
624
S6
625 626 627 628 629 700 701 702 703 704 705 706
S6 S6 S9 S10 S10
S6
706 707 708 709 710 711 712 713 714 715 800 801 802 803 804 805 806 807 808 809 810 811 813 815 817 819 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922
The requested channel rate corresponding to the A interface circuit pool has not been defined on the A interface. The circuit type A is totally contradictory to the TCH channel rate requirement, or the data rate requirement implies a circuit pool change. The radio interface data rate requirement is totally contradictory to the A interface pool configuration. BSC has received either an Assignment Request or a Handover Request message containing speech codec versions none of w hich are supported by the BSC. There is no free place for the call in the hunting queue. There is no free circuit for the call. The content of the hunting request message is invalid. The hunted circuit is from the w rong circuit pool. The hunting queue is full. An emergency call has taken priority over the ordinary call. An interface circuit reservation fails because no pool is available on the hunting list. A request to connect, disconnect or release a speech circuit is received from a process w hich is not recorded as a user of the circuit in the internal control tables of SC7PRB. Timeout in the SC7PRB w hile allocating an A interface speech circuit. Timeout in the SC7PRB w hile connecting an A interface speech circuit. Timeout in the SC7PRB w hile disconnecting an A interface speech circuit. Timeout in the SC7PRB w hile releasing an A interface speech circuit. Assignment of a circuit that is blocked. Assignment of a circuit w hose status is unknow n. Access to the Line Signalling File (LSIGNL) failed. Access to the System-controlled Circuit State File (SCCTST) failed. The circuit concerned is not defined in the LSIGNL file. The SC7PRB has detected a situation w hich has been caused by hardw are problems. The reset circuit message has been received from the MSC. An error caused by the "SCCP prohibited" status. The situation has been detected by the SC7PRB. A fault has been detected in the 2 Mbit PCM connection. A speech circuit has been removed from use. State change of the ET has occurred. Cause value 0x00 "radio interface message failure" received from the MSC. Cause value 0x01 "radio interface failure" received from the MSC. Cause value 0x02 "uplink quality" received from the MSC. Cause value 0x03 "uplink strength" received from the MSC. Cause value 0x04 "dow nlink quality" received from the MSC. Cause value 0x05 "dow nlink strength" received from the MSC. Cause value 0x06 "distance" received from the MSC. Cause value 0x07 "O and M intervention" received from the MSC. Cause value 0x08 "response to MSC invocation" received from the MSC. Cause value 0x09 "call control" received from the MSC. Cause value 0x0A "radio interface failure, reversion to old channel" received from the MSC. Cause value 0x0B "handover successful" received from the MSC. Cause value 0x0C "better cell" received from the MSC. Cause value 0x0D "directed retry" received from the MSC. Cause value 0x20 "equipment failure" received from the MSC. Cause value 0x21 "no radio resource available" received from the MSC. Cause value 0x22 "requested terrestrial resource unavailable" received from the MSC. Cause value 0x23 "CCCH overload" received from the MSC. Cause value 0x24 "processor overload" received from the MSC. Cause value 0x25 "BSS not equipped" received from the MSC. Cause value 0x26 "MS not equipped" received from the MSC. Cause value 0x30 "requested transcoding/rate adaption unavailable" received from the MSC. Cause value 0x40 "ciphering algorithm not supported" received from the MSC.
922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 S6 S6 S6 S6 S6 S6 S6 S6 S6 S6 S8 S8
Cause value 0x40 "ciphering algorithm not supported" received from the MSC. Cause value 0x50 "terrestrial circuit already allocated" received from the MSC. Cause value 0x60 "protocol error betw een BSC and MSC" received from the MSC. Unexpected failure from the MSC. Cause value 0x27 "invalid cell" received from the MSC. Cause value 0x51 "invalid message contents" received from the MSC. Cause value 0x52 "information element or field missing" received from the MSC. Cause value 0x53 "incorrect value" received from the MSC. Cause value 0x54 "unknow n message type" received from the MSC. Cause value 0x55 "unknow n information element" received from the MSC. Cause value 0x30 "requested transcoding/rate adaption unavailable" received from the MSC. Cause value 0x31 "circuit pool mismatch" received from the MSC. Cause value 0x32 "sw itch circuit pool" received from the MSC. Cause value 0x31 "requested speech version unavailable" received from the MSC. Cause value 0x29 preemption received from the MSC. Cause value 0x0F traffic received from the MSC.
P_NBSC_CC table P_NBSC_CC table show s in the NBR_OF_CALLS column, the number of calls per clear code ID. The field names listed below are visible in NetActs reporting tools only. Table: BSC clear codes mapped to the CLEAR_CODE_ID column in the P_NBSC_CC table NE counter nam e Clearcode ID Field nam e 0 USER_ACT_BLOCK
ID 500300
Release Since S4
1 2 3 4 5 6
Channel blocking caused by the netw ork Since S4 Channel blocking caused by the BTS failure Channel blocking caused by the LAPD failure Channel blocking caused by the Abis failure The message packing fails on the Abis interface to the BTS or the MS. Since S4 Since S4 Since S4 Since S4
The Abis receives an Since S4 ASSIGNMENT_FAILURE message from the MS during a Basic Call. Channel blocking caused by some other reason than the ones given above. The Abis receives a CHANNEL_ACTIVATION_NACK message or its contents has been corrupted. The Abis receives a CHANNEL_ACTIVATION_NACK message and the cause is O&M intervention. The Abis receives a CHANNEL_ACTIVATION_NACK message and the cause is equipment failure. Since S4 Since S4
500307 500308
7 8
BLOCK_SLAVE CH_ACT_NACK
500309
CH_ACT_NACK_OM_INTER
Since S4
500310
10
CH_ACT_NACK_EQUIP_FAIL
Since S4
500311
11
CH_ACT_NACK_ENCRYP_ALG
The Abis receives a Since S4 CHANNEL_ACTIVATION_NACK message and the cause is an encryption algorithm not supported. The Abis receives a Since S4
500312
12
CH_ACT_NACK_CH_RAD_ALR_A
500312
12
CH_ACT_NACK_CH_RAD_ALR_A
The Abis receives a CHANNEL_ACTIVATION_NACK message and the cause is that the radio channel has already been allocated. The Abis receives a CHANNEL_ACTIVATION_NACK message and the cause is that the service is not available. The Abis receives a CHANNEL_ACTIVATION_NACK message. The contents of the message has been corrupted or a timer expires w hile w aiting for the message. The Abis interface receives a CONNECTION_FAILURE message.
Since S4
500313
13
CH_ACT_NACK_SERV_NOT_AVA
Since S4
500314
14
CH_ACT_FAIL
Since S4
500315 500316
15 16
CONN_FAIL CONN_FAIL_RAD_INF_FAIL
Since S4
The Abis interface receives a Since S4 CONNECTION_FAILURE message and its cause is radio interface failure. The Abis interface receives a Since S4 CONNECTION_FAILURE message and its cause is radio link failure. The Abis interface receives a Since S4 CONNECTION_FAILURE message and its cause is remote transcoder failure. The Abis interface receives a DATA_INDICATION message w hose contents has been corrupted. The Abis interface receives a ERROR_INDICATION message. The Abis receives an ESTABLISH_INDICATION message. The contents of the message has been corrupted or a timer expires w hile w aiting for the message. The Abis receives an ESTABLISH_CONFIRM message. The contents of the message has been corrupted or a timer expires w hile w aiting for the message. Since S4
500317
17
CONN_FAIL_RAD_LINK_FAIL
500318
18
CONN_FAIL_REM_TRANS_FAIL
500319
19
DATA_IND_CORRUP
500320 500321
20 21
ERR_IND ESTAB_IND_FAIL
Since S4 Since S4
500322
22
ESTAB_CONV_FAIL
Since S4
500323
23
HO_FAIL
The handover has been failed and the Since S4 MS returns to the source channel. The MS has sent an assignment failure or a handover failure message to the netw ork during the handover. The Abis receives an HO_DETECT message. The contents of the message has been corrupted or a timer expires w hile w aiting for the message. The Abis receives a MODE_MODIFY_NACK message. The Abis receives a MODE_MODIFY_ACK message. The contents of the message has been corrupted or a timer expires w hile w aiting for the message. No measurement result message from the BTS. Since S4
500324
24
HO_DETECT_FAIL
500325 500326
25 26
MODE_MOD_NACK MODE_MOD_ACK_FAIL
Since S4 Since S4
27 28 29
Since S4
Timer expires because co-process does Since S4 not respond. A BSC-internal failure. The Abis receives a PHYSICAL_CONTEXT_CONFIRM message. The contents of the message has been corrupted or a timer expires w hile w aiting for the message. The Abis receives a Since S4
500330
30
RCS_ALG_START_ACK_FAIL
Since S4
500330
30
RCS_ALG_START_ACK_FAIL
500331
31
RCS_ALG_CL_ACK_FAIL
The Abis receives a RCS_ALGORITHM_START_ACK message. The contents of the message has been corrupted or a timer expires w hile w aiting for the message. The Abis receives a RCS_ALGORITHM_CLEAR_ACK message. The contents of the message has been corrupted or a timer expires w hile w aiting for the message. BSCinternal signalling
Since S4
Since S4
500332
32
RCO_DISCO_IND
The Abis receives a Since S4 RCO_DISCONNECT_IND message from RC0. The Abis receives an RF_CH_REL_ACK Since S4 message. The contents of the message has been corrupted or a timer expires w hile w aiting for the message. The Abis receives a RELEASE_INDICATION message from. Since S4
500333
33
RF_CH_REL_ACK_FAIL
500334
34
REL_IND
500335
35
REL_IND_FAIL
The Abis receives a Since S4 RELEASE_INDICATION message. The contents of the message has been corrupted or a timer expires w hile w aiting for the message. DTAP signalling fails. Since S4
36 37 38 39 40
An attempt to activate a blocked channel Since S4 in the Abis interface. An attempt to activate a channel w ith w rong information in the Abis interface. Forced TCH release. Rejected phantom reservations. The w rong establishment cause w ithin the channel required message from the MS. Overload message from the BTS. Number of unsuccessful calls set-ups during the BCSU sw itchover. IMPACT: Call set-up failures Since S4 Since S4 Since S4
500341 500342
41 42
OVERLOAD ABI_SWITCHOVER
Since S4 Since S4
500343
43
SAPI_3_FAIL
During the SMS establishment the Abis interface receives a RELEASE_INDICATION message or the ESTABLISH_INDICATION message received has been corrupted. The Abis interface receives an MS_PAGING message and the channel has been blocked. The Abis receives a CHANNEL_REQUIRED message. The contents of the message has been corrupted. The Abis receives a MODE_MODIFY_NACK message w ith the cause equipment failure. The Abis receives a MODE_MODIFY_NACK message w ith the cause requested transcoding/rate adaption not available. The Abis receives an RRM_CH_SERV_REQ_NACK message. The Abis receives a CH_MODE_MODIFY_ACK message and the mode has not been the same as requested. Timer expires w hile w aiting
Since S4
500344
44
PAGING_MSG_FAIL
Since S4
500345
45
CH_REQUIRED_FAIL
Since S4
500346
46
MODE_MOD_NACK_EQUIP_FAIL
Since S4
500347
47
MODE_MOD_NACK_TRC_RAT_UN
Since S4
500348 500349
48 49
RRM_SERV_REQ_NACK CH_MODE_MOD_FAIL
Since S4 Since S4
500350
50
ASS_FAIL
Since S4
50 51 52 53
Timer expires w hile w aiting ASSIGNMENT_COMPLETE message. Directed retry procedure fails.
Since S4 Since S4
A failure has occurred in the co process. Since S4 ERROR_REPORT message received from Since S4 BTS and the cause is encryption algorithm not implemented. The ERROR_REPORT message received Since S4 from BTS. Since S5 UPDATED: When the Abis interface receives a CHANNEL_ACTIVATION_NACK message w here the failure cause is either the Not implemented Unspecified or the Mandatory IE Error. IMPACT: Call Clear
500354 500355
54 55
ERROR_REPORT CH_ACT_NACK_CH_MODE_ERR
500356
56
CH_ACT_NACK_GEN_IE_ERR
UPDATED: When the Abis interface receives a CHANNEL_ACTIVATION_NACK message w here the failure cause is General IE Error. IMPACT: Call Clear
Since S5
500357
57
SPEECH_VERSION_UNAVAIL
UPDATED: When the Abis interface receives Assignment or Handover Failure from MS w here RR-cause is Channel mode Unacceptable. IMPACT: Call Clear/HO-failure
Since S5
500358 500359
58 59
IGNORED_DOUBLE_RAND_ACC RTSL_RECONF
Number of ignored double rand acc. Number of failed reconfigurations of a dynamic SDCCH. UPDATED: When the reconfiguration of a dynamic SDCCH resource is failed at the time of an immediate assignment because all of the SDCCH resources under the control of the BCSU are already in use. IMPACT: Call cleared
Since S6 Since S7
500400 500401
60 61
TIMING_ADVANCE RRM_SWITCH_CRC_POOL
Since S4
UPDATED: RRMPRB w ill set this cause in Since S5 the TCH resource request negative acknow ledgement message in order to indicate the A-interface circuit pool change request. Number of requests for channel type rejected because the speech coder versions requested are not supported. Number of requests for the resources that are not supported by the BTS. This counter is mapped to BSSMAP cause Requested transcoding/rate adaption unavailable (0x30). UPDATED: When the BTS does not support the requested resource. Since S6
500402
62
RRM_SPEECH_VER_UNAVAIL
500403
63
RRM_BTS_NOT_SUPPORTING
Since S7
500404
64
RRM_MS_NOT_SUPPORTING
Since S7 Number of requests for the resources that are not supported by the MS. This counter is mapped to BSSMAP cause MS not equipped (0x26). UPDATED: When the MS does not support the requested resource.
500500
65
HO_NOT_ALLOWED
500500
65
HO_NOT_ALLOWED
66 67 68 69 70
External HO not allow ed during a FACCH Since S4 call set-up, or disabling in external DR HO. No radio resources in the BTS for Since S4 channel reservation during HO signalling. Spare Signalling w ith the internal processes has failed during HO signalling. Target channel reservation has failed during HO signalling. Target channel reservation has failed. Channel activation acknow ledgement has not been received, a timer has expired. No clear command has been received from the A-interface during external source HO signalling Since S4 Since S4 Since S4 Since S4
500506
71
CLEAR_CMD_NOT_RECEIVED
Since S4
500507
72
MS_IS_LOST
The timer t3107, t3103 or t9113 has Since S4 expired. The assignment complete or HO complete message has not been received. The MS has not established a channel to the target cell. Problems in sending the HO performed message by the BSC. Since S4
73 74 75 76 77 78
Sw itchover has been started and the HO Since S4 has failed. Failure in the target channel. Failure in the source channel. The master has failed to create a hand. Since S4 Since S4 Since S4
UPDATED: When the handover attempt Since S5 has been interrupted w hen the BSC notices that the target cell information (BCCH frequency and/or BSIC) received in the HANDOVER COMMAND message from the MSC is not correct. This counter indicates that information in the BSS Radio Netw ork Configuration Database concerning adjacent cells is w rong. IMPACT: HO-failed REASON: Internal
79 80 81 82 83 84 85
Spare Spare Spare Spare Spare Spare Activation of a hand process fails in the AIVPRB master. UPDATED: When the AIVPRB master fails to create a hand process for the call. IMPACT: Call attempt fails Since S4
500601
86
AIV_SSP
The SCCP connection establishment not Since S4 possible because the subsystem is in the prohibited status. UPDATED: When the AIVPRB rejects the call attempt because the MSC is not reachable. IMPACT: Call attempt fails
500602
87
SCCP_CONN_FAIL
500602
87
SCCP_CONN_FAIL
The SCCP connection establishment fails. Since S4 A cref message received from the MSC. UPDATED: When a CREF message is received from the MSC. IMPACT: Call attempt fails
500603
88
SCCP_CONN_TIMEOUT
No response from the MSC to SCCP connection establishment. UPDATED: When the GSM timer T9105 expires. IMPACT: Call attempt fails
Since S4
500604
89
SCCP_RELEASE
Abnormal release of the SCCP connection. UPDATED: Whenever the MSC clears a call by releasing the SCCP connection w ithout first clearing the upper layers (BSSMAP). IMPACT: Call dropped
Since S4
500605 500606
90 91
SPARE500605 GLOBAL_RESET
Spare State change of a SCCP subsystem or a Since S4 reset message from the MSC. UPDATED: - When the state of a SCCP subsystem changes so that the MSC becomes unattainable - When a reset message is received from the MSC IMPACT: Call dropped
500607 500608
92 93
SPARE500607 NO_DTAP_FROM_MSC
Spare No DTAP message from the MSC after successful SCCP establishment. UPDATED: When the SCCP connection is established w ithout user data in CR and CC messages and a timer that supervises reception of further messages from the MSC expires. IMPACT: Call attempt fails Since S4
500609
94
HO_DENIED_ASSIGN
Starting the HO is not allow ed because Since S4 an assignment procedure is in progress. UPDATED: When the HO attempt is interrupted. IMPACT: HO attempt interrupted
500610
95
HO_DENIED_CIPHERING
Starting the HO is not allow ed because the ciphering procedure is in progress. UPDATED: When the HO attempt is interrupted. IMPACT: HO attempt interrupted
Since S4
500611
96
HO_DENIED_CLEAR
Starting the HO is not allow ed because the call clearing procedure is in progress. UPDATED: When the HO attempt is interrupted. IMPACT: HO attempt interrupted
Since S4
500612
97
HO_DENIED_NO_SCCP_CONN
Starting the external SDCCH HO is not allow ed because the SCCP connection
Since S4
establishment is not complete. UPDATED: When the HO attempt is interrupted. IMPACT: HO attempt interrupted Expiry of the GSM timer T7. UPDATED: When the HO attempt is interrupted. IMPACT: HO attempt interrupted 500614 99 T10 _EXPIRY Expiry of the GSM timer T10. UPDATED: When the call is cleared. IMPACT: The assignment procedure fails on A interface. The call / call attempt is likely to be cleared by the MSC. 500615 100 AIV_CRCT_RE_TIMEOUT Timeout in the AIVPRB w hile allocating an Since S4 A-interface speech circuit. UPDATED: When the call is cleared or the HO attempt fails. IMPACT: Call / HO attempt fails. 500616 101 AIV_CRCT_CONN_TIMEOUT Timeout in the AIVPRB w hile connecting an A-interface speech circuit. UPDATED: When the call is cleared or the HO attempt fails. IMPACT: Call / HO attempt fails 500617 102 AIV_CRCT_DISCONN_TIMEOUT Timeout in the AIVPRB w hile disconnecting an A-interface speech circuit. Since S4 Since S4 Since S4
500613
98
T7_EXPIRY
Since S4
Timeout in the AIVPRB w hile releasing an Since S4 A-interface speech circuit. Timeout in the AIVPRB in BSC-internal communication. The BSC-internal supervision timer, w hich supervises the communication betw een the Abis and the A-interface, has expired. UPDATED: When the call is cleared. IMPACT: Call dropped Since S4 Since S4
500621
106
INVALID_BSSMAP_MSG
An erroneous message, w hich leads to the clearing of the call, has been received from the MSC. IMPACT: Call dropped
Since S4
500622 500623
107 108
UNKNOWN_A_PCM HO_DENIED_NO_PROPER_CRC
Message received concerning unknow n Since S4 A-interface PCM multiplex. Number of HO enquiries rejected due to no circuit available. UPDATED: When the AIVPRB receives a request for an HO from the HASPRB w ith cause sw itch_ circuit_pool and no A interface circuit matches those in the pool list of the enquiry. IMPACT: HO attempt interrupted Since S4
500624
109
CH_TYPE_MISMATCH
The radio interface data rate requirement Since S5 is totally contradictory w ith the TCH channel rate request of the channel type IE included in the normal ASSIGNMENT_REQUEST or the HANDOVER_REQUEST message. In the
ASSIGNMENT_REQUEST message related to the IN_CALL_MODIFICATION message or the FACCH call set-up the TCH channel rate request, or the data rate request is totally contradictory w ith the type of the TCH on w hich the call is maintained. UPDATED: When the above mentioned conditions are fulfilled during the assignment or the HO resource allocation procedures. IMPACT: The assignment procedure fails on A interface or in case of HO the HO attempt fails. Number of assignment or HO requests Since S5 failed because the TCH type requested is not supported by the A interface pools. Number of assignment or HO requests rejected because the speech coder versions requested are not supported. Since S5
500625
110
AIV_TRANSC_OR_RATE_UNAVA
500626
111
AIV_SPEECH_VERSION_UNAVA
500627
112
AIV_PAGING_REFUSED_BIG_LOAD Updated w hen a paging message is Since S9 received from the MSC and there is too big load in the same BCSU unit. Big load is observed by the amount of unhandled messages in the unit. UPDATED: When bsc_dx_cause 627 is set because of too many unhandled messages in the BCSU unit.
500628
113
AIV_CONN_REFRESH_TIMEOUT
The A interface connection is refreshed from time to time during a call. This counter indicates that the timer for the connection refresh procedure has expired. The A interface connection is refreshed from time to time. This counter indicates that the connection refresh procedure has failed. RC0PRB master fails to activate a hand process. Assignment of a speech circuit w hich has already been allocated. Connection error in marker w hile connecting an A-interface speech circuit.
Since S10
500629
114
AIV_CONN_REFRESH_FAILED
Since S10
Timeout in the RC0PRB w hile connecting Since S4 an A-interface speech circuit. Requested speech circuit not found in the circuit control table Circuit release error in marker w hile releasing an A-interface speech circuit. UPDATED: When the requested channel rate corresponding A-interface circuit pool has not been defined on the Ainterface. Since S4 Since S4 Since S5
500707
122
RCO_CIP_TYPE_MISMATCH
Since S5 UPDATED: When the A-circuit type is totally contradictory w ith the TCH channel rate requirement or the data rate requirement implies the circuit pool change. UPDATED: When the radio interface data Since S5 rate requirement is totally contradictory w ith the A-interface pool configuration Number of requests for channel type Since S6
500708
123
RCO_INV_MSG_CONTENTS
500709
124
RCO_REQ_SPEECH_VER_UNAVA
500709
124
RCO_REQ_SPEECH_VER_UNAVA
Number of requests for channel type rejected because the speech coder versions requested are not supported. Number of times w hen there is no free place for the call in the hunting queue. Number of times w hen there is no free circuit for the call.
Since S6
Number of times w hen the content of the Since hunting request message is invalid. S10 Number of times w hen the hunted circuit Since is from the w rong circuit pool. S10 Number of times w hen the hunting queue Since is full and an emergency call has taken S10 priority over an ordinary call. A request to connect, disconnect or Since S4 release a speech circuit is received from a process, w hich is not recorded as a user of the circuit in SC7PRBs internal control tables. Timeout in the SC7PRB w hile allocating an A-interface speech circuit. Since S4
500713 500714
128 129
RC0_CRCT_POOL_MISMATCH RC0_REJ_DUE_EME_CALL
500800
130
A_TSL_USER_MISMATCH
Timeout in the SC7PRB w hile connecting Since S4 an A-interface speech circuit. Timeout in the SC7PRB w hile disconnecting an A-interface speech circuit. Timeout in the SC7PRB w hile releasing an A-interface speech circuit. Assignment of a circuit that is blocked. Assignment of a circuit w hich status is unknow n. Access to the file LSINGL failed Access to the file SCCTST failed. The circuit concerned is not defined in the LSIGNL file. The SC7PRB has detected a situation w hich has been caused by hardw are problems. The RESET_CIRCUIT message has been received from the MSC. Spare An error caused by the SCCP prohibited Since S4 -status. The status has been detected by the SC7PRB. Spare A fault detected in the 2-Mbit PCM connection. Spare A speech circuit has been removed from Since S4 use. Spare State change of the ET has occurred. Spare Spare Spare Spare Spare Spare Spare Since S4 Since S4 Since S4
Since S4
500814 500815 500816 500817 500818 500819 500820 500821 500822 500823 500824 500825 500826
144 145 146 147 148 149 150 151 152 153 154 155 156
SPARE500814 A_PCM_FAULT SPARE500816 A_CRCT_REMOVED SPARE500818 A_ET_STATE_CHANGE SPARE500820 SPARE500821 SPARE500822 SPARE500823 SPARE500824 SPARE500825 SPARE500826
500827 500828 500829 500900 500901 500902 500903 500904 500905 500906 500907 500908 500909 500910
157 158 159 160 161 162 163 164 165 166 167 168 169 170
SPARE500827 SPARE500828 SPARE500829 M_RADIO_IF_MESS_FAIL M_RADIO_IF_FAIL M_UPLINK_QUALITY M_UPLINK_STRENGTH M_DOWNLINK_QUALITY M_DOWNLINK_STRENGTH M_DISTANCE M_O_AND_M_INTER M_RESP_TO_MSC_INVOC M_CALL_CONTROL M_R_IF_F_REV_TO_OLD
Spare Spare Spare Cause value 0x00, radio interface message failure, received from MSC. Since S4
Cause value 0x01, radio interface failure, Since S4 received from MSC. Cause value 0x02, uplink quality, received from MSC. Cause value 0x03, uplink strength, received from MSC. Cause value 0x04, dow nlink quality, received from MSC. Cause value 0x05, dow nlink strength, received from MSC. Cause value 0x06, distance, received from MSC. Cause value 0x07, O&M intervention, received from MSC. Cause value 0x08, response to MSC invocation, received from MSC. Cause value 0x09, call control, received from MSC. Cause value 0x0A, radio interface failure, reversion to old channel, received from MSC. Cause value 0x0B, HO successful, received from MSC. Cause value 0x0C, better cell, received from MSC. Cause value 0x0D, directed retry, received from MSC. Cause value 0x20, equipment failure, received from MSC. Cause value 0x21, no radio resource available, received from MSC. Since S4 Since S4 Since S4 Since S4 Since S4 Since S4 Since S4 Since S4 Since S4
Cause value 0x22, requested terrestrial Since S4 resource unavailable, and received from MSC. Cause value 0x23, ccch overload, received from MSC. Cause value 0x24, processor overload, received from MSC. Cause value 0x25, bss not equipped, received from MSC. Cause value 0x26, ms not equipped, received from MSC. Cause value 0x30, requested transcoding/rate adaption unavailable, and received from MSC. Cause value 0x40, ciphering algorithm not supported, received from MSC. This includes the follow ing: cause value 0x50, terrestrial circuit already allocated, cause value 0x51, invalid message contents, cause value 0x52, information element or Since S4 Since S4 Since S4 Since S4 Since S4
500922 500923
182 183
M_CIPH_ALG_NOT_SUPP M_TERR_CHAN_ALR_ALLC
Since S4 Since S4
field missing, cause value 0x53, incorrect value, cause value 0x54, unknow n message, cause value 0x55, unknow n information element, 500924 184 M_PROT_ERR_B_BSC_MSC received from the MSC Number of messages received from the MSC w hich report protocol error betw een the BSC and the MSC. UPDATED: If the BSC detects the failure w hich causes the clearing of a call or if the MSC sends a clear command during a non-transparent procedure. 500925 500926 500927 500928 500929 500930 500931 500932 185 186 187 188 189 190 191 192 M_UNEXPECTED M_INVALID_CELL M_INVALID_MSG_CONT M_IE_OR_FIELD_MISSING INCORRECT_VALUE UNKNOWN_MSG_TYPE UNKNOWN_IE M_TRANSC_OR_RATE_UNAVAIL Unexpected failure from the MSC. Cause value 0x27 "invalid cell" received from MSC Cause value 0x51 "invalid message contents" received from MSC. Cause value 0x52 "information element or field missing" received from MSC. Cause value 0x53 "incorrect value" received from MSC. Cause value 0x54 "unknow n message type" received from MSC. Since S4 Since S4 Since S4 Since S4 Since S4 Since S4 Since S4
Cause value 0x55 "unknow n information Since S4 element" received from MSC. Cause value 0x30 requested transcoding/rate adaptation unavailable received from the MSC Since S5
Cause value 0x31 circuit pool mismatch Since S5 received from the MSC Cause value 0x32 sw itch circuit pool received from the MSC. Cause value 0x31 requested speech version unavailable received from the MSC Number of messages received from the MSC w hich reports the pre-emption. UPDATED: When the cause value is 0x29. Since S5 Since S5
500936
196
M_PRE_EMPTION
Since S8
500937
197
M_TRAFFIC
Number of messages received from the MSC w hich reports the cause traffic. UPDATED: When the cause value is 0x0F.
Since S8
198
NBR_OF_CALLS
Number of messages received from the Since MSC w hich report BSSMAP cause traffic S12 load. UPDATED: When the BSSMAP cause value is 0x28. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode
Spare Spare Number of interrupted HOs. UPDATED: When an assignment procedure is started before the MS is assigned to move to a new channel and Since S7
HO attempt is terminated w ith cause ho_interrupted. 500361 202 DOWNGRADE_WITH_HSCSD IMPACT: HO interrupted Number of channel releases caused by dow ngrade. UPDATED: When dow ngrade procedure is completed successfully. IMPACT: Channel release 500362 203 HO_NOT_STARTED Number of HO starts rejected due to other ongoing procedures. UPDATED: When the HO start is rejected due to another ongoing procedure. IMPACT: HO interrupted 500363 204 CONF_CHANGE_NOT_ALLOWED Number of upgrades, dow ngrades, subsequent assignments and ALAs rejected due to other ongoing procedures. UPDATED: When the upgrade, dow ngrade or ALA is rejected due to another ongoing procedure. IMPACT: Possible call clear 500364 205 CONF_CHANGE_BTS_FAIL Number of failed configuration changes Since S7 due to BTS sending a MODE MODIFY NACK message or BTS not answ ering at all. UPDATED: When the configuration change fails because the BTS sends a MODE_MODIFY_NACK message or the BTS does not answ er at all. IMPACT: Possible call clear 500365 206 CONF_CHANGE_MS_FAIL Number of failed configuration changes due to MS sending a CONFIGURATION CHANGE REJECT message or MS not answ ering at all. UPDATED: When the configuration change fails because the MS rejects the configuration change or the MS does not answ er at all. IMPACT: Possible call clear 500366 207 HSCSD_COPRO_FAIL Number of channel releases caused by a Since S7 failure in another channel in an HSCSD configuration. UPDATED: When a channel is released due to failure in another channel in an HSCSD configuration. IMPACT: Possible call clear 500367 208 SUB_TIMER Number of timer expires due to subchannel not responding to main channel in an HSCSD connection. UPDATED: When a timer expires because the subchannel does not respond to the main channel in an HSCSD connection. IMPACT: Call cleared 500368 209 FORCED_HO_BLOCK Number of blocked TCHs after a forced HO attempt. This counter is mapped to BSSMAP cause O and M intervention Since S7 Since S7 Since S7 Since S7 Since S7 Since S7
(0x07). IMPACT: Call cleared Number of upgrade procedure failures. This counter is mapped to BSSMAP cause Equipment failure (0x20). UPDATED: When upgrade procedure fails. IMPACT: Channel release 500370 211 ESTAB_IND_CORRUPTED Number of corrupted ESTABLISH_INDICATION messages received by the Abis interface. Spare Spare Since S10 Since S11 Since S11
500369
210
UPGRADE_FAIL
Since S7
Number of unsuccessful channel setups Since occurring w hen the BSC-BSC conflict S12 control is used. This counter is mapped to the BSSMAP cause call_control (0x09). Impact: A TCH channel is released due to a BSC-BSC conflict situation. UPDATED: When a TCH channel is released due to a BSC-BSC conflict situation.
215
NBR_OF_CALLS
Number of TCH or SDCCH channel Since releases that occur because the global S12 CN ID that w ould match w ith the mobile's IMSI is not found in the BSC for the CS PAGING RESPONSE message. UPDATED: When a TCH or SDCCH channel is released because the global CN ID is not found. DOMAIN LEVEL FEATURES: BSS20092, Multipoint A-interface
Number of failed traffic channel allocations in external handover. UPDATED: When a target cell is not controlled by the BSS. DEPENDENCIES WITH OTHER COUNTERS: Tw o counters of the Handover measurement are incremented along w ith this DX cause: - Number of unsuccessful handovers due to the lack of resources (new cell side) (004001). Number of unsuccessful handovers due to the lack of resources (old cell side) (004055). IMPACT: HO failed
Since S8
500630 500631 500632 500633 500634 500635 500636 500637 500638 500639 500941 500942 500943 500944 500715 500716 500717 500718 500719 500720 P_NBSC_CC_PM table
225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244
SPARE500630 SPARE500631 SPARE500632 SPARE500633 SPARE500634 SPARE500635 SPARE500636 SPARE500637 SPARE500638 SPARE500639 SPARE500941 SPARE500942 SPARE500943 SPARE500944 RC0_ILC_FILE_ERROR SPARE500716 SPARE500717 SPARE500718 SPARE500719 SPARE500720
Spare Spare Spare Spare Spare Spare Spare Spare Spare Spare Spare Spare Spare Spare Number of times w hen there is no pool available on the hunting list. Spare Spare Spare Spare Spare Since S10
P_NBSC_CC_PM table show s in the NBR_OF_CALLS column the number of calls per clear code ID. The field names listed below are visible in NetActs reporting tools only. Table: BSC clear codes mapped to the CLEAR_CODE_ID column in the P_NBSC_CC_PM table Clear code ID Release Field nam e 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 SPARE051000 Since S3 EXTERNAL_HO_SOURCE_FAILURES Since S3 EXTARNAL_HO_TARGET_FAILURES Since S3 INTERNAL_INTER_HO_FAILURES Since S3 INTERNAL_INTRA_HO_FAILURES Since S3 CALL_FAILURES Since S4 SETUP_FAILURES Since S4 DROPPED_CALLS Since S4 TCH_FAILS SPARE051009 SPARE051010 Since S3 EXTERNAL_HO_SOURCE_SUCC Since S3 EXTERNAL_HO_TARGET_SUCC Since S3 INTERNAL_INTER_HO_SUCC Since S3 INTERNAL_INTRA_HO_SUCC Since S3 CALL_SUCCESSFUL Since S4 SETUP_SUCCESSFUL Since S4 CONVERSATION_STARTED Since S4 TCH_SEIZURES SPARE051019 SPARE051020 SPARE051021
ID 051000 051001 051002 051003 051004 051005 051006 051007 051008 051009 051010 051011 051012 051013 051014 051015 051016 051017 051018 051019 051020 051021
NE counter nam e
Field description Spare External HO source failures External HO target failures Internal inter HO failures Internal intra HO failures Call failures set-up failures Dropped calls TCH fails Spare Spare External HO source successful External HO target successful Internal inter HO successful Internal intra HO successful Call successful set-up successful Conversation started TCH seizures Spare Spare Spare
21 22 23 24 25 26 27
SPARE051021 Since S3 BCSU_RESET_FOR_A_CALOL_OR_HO SPARE051023 SPARE051024 Since S6 ATT_LOCATION_UPDATE Since S4 LOCATION_UPDATE Since S7 FACCH_IMSI_DETACH
Spare BCSU reset for a call or HO Spare Spare Number of location update attempts. Location Update Number of successful FACCH calls w ith establishment cause imsi_detach. FACCH emergency call FACCH re-establishment FACCH answ er to paging FACCH MO speech call FACCH MO data call FACCH other procedure FACCH MT data call Number of emergency call attempts. Number of re-establishment attempts. Number of answ ers to paging attempts. Number of mo speech call attempts. Number of other procedure attempts. Number of IMSI detach attempts. Basic emergency call Basic re-establishment Basic answ er to paging Basic MO speech call Basic MO data call Basic other procedure Basic MT data call Number of successful basic calls w ith establishment cause BASIC_IMSI_DETACH. Spare Spare The counter indicates the amount of successful incoming external HOs for w hich establishment cause is uplink quality. The counter indicates the amount of successful incoming external HOs for w hich establishment cause is uplink strength. The counter indicates the amount of successful incoming external HOs for w hich establishment cause is dow nlink quality. The counter indicates the amount of successful incoming external HOs for
051028 051029 051030 051031 051032 051033 051034 051035 051036 051037 051038 051039 051040 051041 051042 051043 051044 051045 051046 051047 051048
28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
Since S3 FACCH_EMERGENCY_CALL Since S3 FACCH_REESTABLHMENT Since S3 FACCH_ANSWER_TO_PAGING Since S3 FACCH_MO_SPEECH_CALL Since S3 FACCH_MO_DATA_CALL Since S3 FACCH_OTHER_PROCEDURE Since S4 FACCH_MT_DATA_CALL Since S6 ATT_EMERGENCY_CALL Since S6 ATT_REESTABLISHMENT Since S6 ATT_ANSWER_TO_PAGING Since S6 ATT_MO_SPEECH_CALL Since S6 ATT_OTHER_PROCEDURE Since S7 ATT_IMSI_DETACH Since S3 BASIC_EMERGENCY_CALL Since S3 BASIC_REESTABLISHMENT Since S3 BASIC_ANSWER_TO_PAGING Since S3 BASIC_MO_SPEECH_CALL Since S3 BASIC_MO_DATA_CALL Since S3 BASIC_OTHER_PROCEDURE Since S4 BASIC_MT_DATA_CALL Since S7 BASIC_IMSI_DETACH
49 50 51
051052
52
Since S3 ESTAB_EXT_IN_UL_strength
051053
53
Since S3 ESTAB_EXT_IN_DL_QUALITY
051054
54
Since S3 ESTAB_EXT_IN_UL_strength
w hich establishment cause is dow nlink strength. 051055 55 Since S3 ESTAB_EXT_IN_DISTANCE The counter indicates the amount of successful incoming external HOs for w hich establishment cause is distance. The counter indicates the amount of successful incoming external HOs for w hich establishment cause is O&M intervention. The counter indicates the amount of successful incoming external HOs for w hich establishment cause is RESP_TO_MSC_INVOC. The counter indicates the amount of successful incoming external HOs for w hich establishment cause is better cell. The counter indicates the amount of successful incoming external HOs for w hich establishment cause is directed retry. The counter indicates the amount of successful incoming external HOs for w hich establishment cause is unexpected. Number of successful incoming external HOs w ith establishment cause SWITCH_CIRCUIT_POOL. Number of successful incoming external handovers w ith establishment cause preemption. UPDATED: When call is released successfully. 051063 63 Since S8 ESTAB_EXT_IN_BSC_TRHO Number of successful incoming external handovers w ith establishment cause traffic. UPDATED: When call is released successfully. 051064 051065 051066 051067 051068 051069 051070 051071 64 65 66 67 68 69 70 71 SPARE051064 SPARE051065 Since S3 EXT_IN_UL_QUALITY_HO Since S3 EXT_IN_UL_strength_HO Since S3 EXT_IN_DL_QUALITY_HO Since S3 EXT_IN_DL_strength_HO Since S3 EXT_IN_DISTANCE_HO Since S3 EXT_IN_OAND_M_INTER_HO Spare Spare External incoming HO due uplink quality External incoming HO due uplink strength External incoming HO due dow nlink quality External incoming HO due dow nlink strength External incoming HO due distance External incoming HO due O&M intervention External incoming HO due
051056
56
Since S3 ESTAB_EXT_IN_O_AND_M_INTER
051057
57
Since S3 ESTAB_EXT_IN_RESP_TO_MSC_INVOC
051058
58
Since S3 ESTAB_EXT_IN_BETTER_CELL
051059
59
Since S3 ESTAB_EXT_IN_DIRECTED_RETRY
051060
60
Since S3 ESTAB_EXT_IN_UNEXPECTED
051061
61
Since S6 ESTAB_EXT_IN_SWITCH_CRC_POOL
051062
62
Since S8 ESTAB_EXT_IN_PREEMPTION
051072
72
Since S3 EXT_IN_RESP_TO_MSC_INVOC_HO
72 73 74 75 76
Since S3 EXT_IN_RESP_TO_MSC_INVOC_HO Since S3 EXT_IN_BETTER_CELL_HO Since S3 EXT_IN_DIRECTED_RETRY_HO Since S3 EXT_IN_UNEXPECTED Since S5 EXT_IN_SWITCH_CRC_POOL
External incoming HO due response to MSC indication External incoming HO due better cell External incoming HO due directed retry External incoming HO due unexpected cause UPDATED: An incoming external handover attempt for changing the A-interface pool. Note The source BSC is the same as the target BSC.
051077
77
Since S8 EXT_IN_PREEMPTION
Number of successful incoming external handovers w ith set-up cause preemption. UPDATED: The counter indicates the number of successful incoming MSC controlled handovers in w hich set-up cause is pre-emption
051078
78
Since S8 EXT_IN_BSC_TRHO
Number of successful incoming external handovers w ith that are set up w ith BSSMAP cause traffic (DX cause number 92). Counters 051012 and 057009 are updated along w ith this counter. UPDATED: When a call has been successfully released after an incoming MSCcontrolled handover.
79 80 Since S12
SPARE051079 NBR_OF_CALLS
Spare Number of incoming MSCcontrolled handovers generated from an internal handover (DX cause number: 94). Counters 051012 and 057009 are updated along w ith this counter. UPDATED: When an incoming MSC-controlled handover is generated from an internal handover. DOMAIN LEVEL FEATURES: BSS20117, TCSM3i
81 82 83 84 85
Since S3 EXT_OUT_DL_RXLEV Since S3 EXT_OUT_UL_RXLEV Since S3 EXT_OUT_DL_RXQUAL Since S3 EXT_OUT_UL_RXQUAL Since S3 EXT_OUT_DL_INTERF
External outgoing HO due dow nlink Rx level External outgoing HO due uplink Rx level External outgoing HO due dow nlink Rx quality External outgoing HO due uplink Rx quality External outgoing HO due
85 86 87 88 89 90 91 92 93
Since S3 EXT_OUT_DL_INTERF Since S3 EXT_OUT_UL_INTERF Since S3 EXT_OUT_DISTANCE Since S3 EXT_OUT_PBGT_HO Since S3 EXT_OUT_UMBRELLA_HO Since S3 EXT_OUT_FORCED_HO Since S3 EXT_OUT_DR_HO Since S3 EXT_OUT_TR_HO Since S3 EXT_OUT_IDR_HO
External outgoing HO due dow nlink interference External outgoing HO due uplink interference External outgoing HO due distance External outgoing HO due pow er budget handover External outgoing HO due umbrella handover External outgoing HO due forced handover External outgoing HO due directed retry handover External outgoing HO due traffic reason handover External outgoing HO due intelligent directed retry handover External outgoing HO due preemption handover External outgoing HO due rapid field drop External outgoing HO due low distance UPDATED: During an outgoing external handover attempt for changing the A-interface circuit pool. Note The source BSC is the same as the target BSC.
94 95 96 97
051098
98
Since S5 EXT_OUT_SLOW_MOVING_MS
UPDATED: During an outgoing external handover. The handover set-up cause is slow moving. MS is in a Macro Cell.
051099
99
Since S6 EXT_OUT_DET_SLOW_MOV_MS
Number of outgoing external HOs w ith set-up cause 118. Number of outgoing external HOs w ith set-up cause 119. The counter indicates the amount of successful internal inter HOs. Handover set up cause is dow nlink RX level. The counter indicates the amount of successful internal inter HOs. Handover set up cause is uplink RX level. The counter indicates the amount of successful internal inter HOs. Handover set up cause is dow nlink RX quality. The counter indicates the amount of successful internal inter HOs. Handover set up cause is uplink RX quality. The counter indicates the
051100 051101
100 101
051102
102
Since S3 INTER_UL_RXLEVEL
051103
103
Since S3 INTER_DL_RXQUAL
051104
104
Since S3 INTER_UL_RXQUAL
051105
105
Since S3 INTER_DL_INTERF
051105
105
Since S3 INTER_DL_INTERF
051106
106
Since S3 INTER_UL_INTERF
The counter indicates the amount of successful internal inter HOs. Handover set up cause is dow nlink interference. The counter indicates the amount of successful internal inter HOs. Handover set up cause is uplink interference. The counter indicates the amount of successful internal inter HOs. Handover set up cause is distance. The counter indicates the amount of successful internal inter HOs. Handover set up cause is pbgt HO. The counter indicates the amount of successful internal inter HOs. Handover set up cause is umbrella HO. The counter indicates the amount of successful internal inter HOs. Handover set up cause is forced HO. The counter indicates the amount of successful internal inter HOs. Handover set up cause is dr HO. The counter indicates the amount of successful internal inter HOs. Handover set up cause is tr HO. The counter indicates the amount of successful internal inter HOs. Handover set up cause is idr HO. The counter indicates the amount of successful internal inter HOs. Handover set up cause is preemption HO. The counter indicates the amount of successful internal inter HOs. Handover set up cause is rapid field drop. The counter indicates the amount of successful internal inter HOs. Handover set up cause is low distance. The counter indicates the amount of successful internal inter HOs. Handover set up cause is ok C/I ratio. The counter indicates the amount of successful internal inter HOs. Handover set up cause is bad C/I ratio. UPDATED: During an internal inter handover. The handover set-up cause is a slow moving MS in a Macro Cell. Number of internal inter-HOs w ith set-up cause 139. The counter indicates the amount of successful internal intra HOs. Handover set up
051107
107
Since S3 INTER_DISTANCE
051108
108
Since S3 INTER_PBGT_HO
051109
109
Since S4 INTER_UMBRELLA_HO
051110
110
Since S3 INTER_FORCED_HO
051111
111
Since S3 INTER_DR_HO
051112
112
Since S3 INTER_TR_HO
051113
113
Since S3 INTER_IDR_HO
051114
114
Since S3 INTER_PRE_EMPT_HO
051115
115
Since S4 INTER_RAP_FIELD_DROP
051116
116
Since S4 INTER_LOW_DISTANCE
051117
117
Since S4 INTER_OK_CI_RATIO
051118
118
Since S4 INTER_BAD_DI_RATIO
051119
119
Since S5 INTER_SLOW_MOVING_MS
051120 051121
120 121
cause is dow nlink interference 051122 122 Since S3 INTRA_UL_INTERF The counter indicates the amount of successful internal intra HOs. Handover set up cause is uplink interference. The counter indicates the amount of successful internal intra HOs. Handover set up cause is forced HO. The counter indicates the amount of successful internal intra HOs. Handover set up cause is dow nlink RX quality. The counter indicates the amount of successful internal intra HOs. Handover set up cause is ok C/I ratio. The counter indicates the amount of successful internal intra HOs. Handover set up cause is bad C/I ratio. The counter indicates an internal intra-cell handover. The handover set-up cause is a pre-emption handover. Number of internal intracell HOs w ith set-up cause 147. Number of internal intracell HOs w ith set-up cause 148. Number of internal intracell HOs w ith set-up cause 149. Number of successful internal intra-cell HOs from a dedicated control channel to a super-reuse TRX. HO set-up cause is the direct access procedure. UPDATED: When the BSC performs an HO (direct access) from a regular or child cell to a super-reuse TRX of a regular or parent cell. The statistics is updated on the basis of the original cause of the HO, for example, pow er budget (PBGT). 051132 132 Since S9 INTRA_GPRS_HO Number of successful intracell handovers made to enable the inclusion of an FTCH into the GPRS territory. UPDATED: After the HO_PERFORMED message is sent to the MSC. DEPENDENCIES WITH OTHER COUNTERS: Counter 051014 is updated along w ith this counter. DOMAIN LEVEL FEATURES: BSS9006 GPRS Telecom in BCSU and MCMU. 051133 133 Since S10 INTRA_HO_TO_AMR_HR Number of successful intracell HOs from AMR FR to AMR HR.
051123
123
Since S3 INTRA_FORCED_HO
051124
124
Since S4 INTRA_DL_RXQUAL
051125
125
Since S4 INTRA_OK_CI_RATIO
051126
126
Since S4 INTRA_BAD_CI_RATIO
051127
127
Since S5 INTRA_PRE_EMPT_HO
UPDATED: After the HO_PERFORMED message is sent to the MSC. DEPENDENCIES WITH OTHER COUNTERS: Counter 051014 is updated along w ith this counter. 051134 134 Since S10 INTRA_HO_TO_AMR_FR Number of successful intracell HOs from AMR HR to FR. UPDATED: After the HO_PERFORMED message is sent to the MSC. DEPENDENCIES WITH OTHER COUNTERS: Counter 051014 is updated along w ith this counter. 051135 051136 051137 051138 135 136 137 138 Since S10 Since S10 INTRA_INTER_BAND_TCH INTRA_INTER_BAND_SDCCH_HANDOVER Number of internal inter-HOs w ith set-up cause 156. Number of internal Enhanced Rapid Field Drop (ERFD) HOs. UPDATED: After a successful ERFD HO. Cause inter_erfd_ho is mapped to better_cell in the A interface. 051139 139 Since S7 INTER_SUCC_DIRECT_ACCESS Number of successful internal inter-cell HOs from a dedicated control channel to a super-reuse TRX. The HO setup cause is the direct access procedure. UPDATED: When the BSC performs an HO (direct access) from a regular or child cell to a super-reuse TRX of a regular or parent cell. The statistics is updated on the basis of the original cause of the HO, for example, pow er budget (PBGT). 051140 140 Since S8 INTER_BSC_TRHO Number of successful internal inter handovers w ith set-up cause BSC_TRHO. UPDATED: When HO is performed successfully. 051141 141 Since S8 INTER_DADLB Number of successful internal handovers to desired layer / band. UPDATED: The counter is updated w hen a BSC internal handover is completed to desired layer / band. 051142 051143 051144 142 143 144 SPARE051142 SPARE051143 Since S7 EXT_OUT_ERFD_HO Spare Spare Number of external Enhanced Rapid Field Drop (ERFD) HOs. UPDATED: After a successful
051145
145
external ERFD HO. Cause EXT_OUT_ERFD_HO is mapped to BETTER_CELL in the A interface. Number of successful outgoing external HOs due to cause traffic. UPDATED: The counter indicates the number of successful outgoing MSC controlled handovers in w hich set-up cause is BSC controlled traffic reason handover. UPDATED: HASPRB updates counter w hen outgoing MSC controlled handover is generated from internal handover.
146
Since S12
EXT_OUT_INT_HO_TO_EXT
Number of outgoing MSCcontrolled handovers generated from an internal handover (DX cause number: 194). Counters 051011 and 057010 are updated along w ith this counter. UPDATED: When an outgoing MSC-controlled handover is generated from an internal handover. DOMAIN LEVEL FEATURES: BSS20117, TCSM3i
051147 051148
147 148
INTRA_INTER_BTS_TYPE_TCH INTRA_INTER_BTS_TYPE_SDC
INTRA_HO_DUE_TO_HSCSD SPARE051150 Spare Number of successful incoming inter-system (WCDMA RAN to GSM) handovers controlled by MSC. UPDATED: When handover is completed. DOMAIN LEVEL FEATURES: GSM-WCDMA Inter-System Handover
Since S10.5
EXT_IN_ISHO
051152
152
Since S10.5
EXT_OUT_ISHO
Number of successful outgoing inter-system (GSM to WCDMA RAN) handovers controlled by MSC. UPDATED: When handover is completed. DOMAIN LEVEL FEATURES: GSM-WCDMA Inter-System Handover
051153
153
Since S10.5
INTRA_INTER_BAND_DUE_LEV
frequency layer betw een BTSs on different frequency bands of a segment due to w eak dow nlink signal level. UPDATED: When a call has been successfully transferred from the non-BCCH frequency layer of the segment to a BTS on another frequency band of the segment due to w eak dow nlink signal level. DEPENDENCIES WITH OTHER COUNTERS: Counter 004132 is updated along w ith this counter. Counter 004169 indicates the respective attempts in each BTS. DOMAIN LEVEL FEATURES: BSS10016 PGSM900/EGSM900/GSM1800 Common BCCH, BSS10087 GSM/EDGE 800/1900 Common BCCH Number of successful handovers from the GSM to the WCDMA RAN due to Direct Access. UPDATED: When handover is completed. DEPENDENCIES WITH OTHER COUNTERS: Attempts can be seen in counter 004181 of the Handover Measurement. DOMAIN LEVEL FEATURES: BSS11107 GSM - WCDMA Interw orking Enhancements 051155 155 Since S11.5 EXT_OUT_IBHO_TO_GSM Number of IMSI based external handovers from the source GSM netw ork to the GSM authorised netw orks. UPDATED: When handover is completed at the source BSC. When IMSI based handover is made from the source GSM netw ork to the GSM authorised netw orks. DOMAIN LEVEL FEATURES: BSS12158 IBHO 051156 156 Since S11.5 EXT_OUT_IBHO_TO_UTRAN Number of IMSI based external handovers from the source GSM netw ork to the UTRAN authorised netw orks. UPDATED: When handover is completed at the source BSC. When IMSI based
051154
154
Since S11
EXT_OUT_INTER_SYSTEM_DA
handover is made from the source GSM netw ork to the UTRAN authorised netw orks. DOMAIN LEVEL FEATURES: BSS12158 IBHO Number of successful DFCA assignments in an inter-BSC communication procedure. UPDATED: When the timer set-up after a BSC-BSC conflict control process has expired. The assignment has been completed successfully and no conflict betw een BSCs have occurred. DOMAIN LEVEL FEATURES: BSS11052 DFCA 051158 158 Since S11.5 INTER_BSC_DFCA_ASSIGN_REJ Number of rejected DFCA assignments after a BSC-BSC conflict control communication procedure. UPDATED: Each time a DFCA assignment process is finally aborted due to a coincident channel assignment processes. DOMAIN LEVEL FEATURES: BSS11052 DFCA 051159 159 S11.5 PS_PAG_REF_DUE_BCSU30_BIGLOAD Number of rejected PS paging messages inside the BCSU. UPDATED: When broadcasted PS paging message from Gb interface is rejected due to BCSU overload. DOMAIN LEVEL FEATURES: BSS20203 051160 051161 051162 051163 051164 051165 051166 051167 051168 160 161 162 163 164 165 166 167 168 S11.5 S11.5 S11.5 S11.5 S11.5 S11.5 S11.5 S11.5 S11.5 PS_PAG_REF_DUE_BCSU31_BIGLOAD PS_PAG_REF_DUE_BCSU32_BIGLOAD PS_PAG_REF_DUE_BCSU33_BIGLOAD PS_PAG_REF_DUE_BCSU34_BIGLOAD PS_PAG_REF_DUE_BCSU35_BIGLOAD PS_PAG_REF_DUE_BCSU36_BIGLOAD PS_PAG_REF_DUE_BCSU37_BIGLOAD PS_PAG_REF_DUE_BCSU38_BIGLOAD CS_PAG_REF_DUE_BCSU30_BIGLOAD See 051159. See 051159. See 051159. See 051159. See 051159. See 051159. See 051159. See 051159. Number of rejected PS paging messages inside the BCSU. UPDATED: When broadcasted PS paging message from Gb interface is rejected due to BCSU overload. DOMAIN LEVEL FEATURES: BSS20203 051169 169 S11.5 CS_PAG_REF_DUE_BCSU31_BIGLOAD See 051168.
051157
157
Since S11.5
INTER_BSC_DFCA_ASSIGN_SUCC
See 051168. See 051168. See 051168. See 051168. See 051168. See 051168. See 051168. See 051168. Number of paging messages from A-interface that are rejected inside the BCSU. UPDATED: When broadcasted paging message from Ainterface is rejected due to BCSU overload. DOMAIN LEVEL FEATURES: BSS20203
051178 051179 051180 051181 051182 051183 051184 INTER DTM NO RES AVAIL 051185 051186 INCOMING EXTERNAL DTM HO DUE NO PS RESOURCES AVAILABLE
S11.5 S11.5 S11.5 S11.5 S11.5 S11.5 S11.5 S11.5 Since S12
See 051177. See 051177. See 051177. See 051177. See 051177. See 051177. See 051177. See 051177.
INCOMING EXTERNAL DTM HO DUE NO PS Number of successful RESOURCES AVAILABLE incoming external handovers due to the reason that there are no free PS resources available for a DTM call or DTM call reallocation in the source cell (DX cause number: 95). Counters 051014, 057013, and 004195 are updated along w ith this counter. UPDATED: When the HANDOVER_COMPLETE message is sent to the MSC. BSS20088, Dual Transfer Mode
187
Since S12
Number of successful incoming external handovers started for DTM calls due to PS quality control or the reason that DTM is being disabled in the source cell (DX cause number: 96). Counters 051014 and 057013 are updated along w ith this counter. UPDATED: When the HANDOVER_COMPLETE message is sent to the MSC. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode
188
Since S12
reason that there are no free PS resources available for a DTM call or DTM call reallocation in the source cell (DX cause number: 162). Counters 051013, 057012, and 004195 are updated along w ith this counter. UPDATED: When the HANDOVER_PERFORMED message is sent to the MSC. DOMAIN LEVEL FEATURES: BSS20088 (Dual Transfer Mode) 051189 INTRA DTM MO CS TO PS TERRITORY HO 189 Since S12 INTRA DTM MO CS TO PS TERRITORY HO Number of successful internal intra-cell handovers started as part of a mobile-originated DTM call establishment (DX cause number: 170). A CSconnection handover from the CS territory to the PS territory is performed. Counters 051014 and 057013 are updated along w ith this counter. UPDATED: When the HANDOVER_PERFORMED message is sent to the MSC. See figure MO DTM call establishment. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode 051190 INTRA DTM MT CS TO PS TERRITORY HO 190 Since S12 INTRA DTM MT CS TO PS TERRITORY HO Number of successful internal intra-cell handovers started as part of a mobile-terminated DTM call establishment (DX cause number: 171). A CSconnection handover from the CS territory to the PS territory is performed. Counters 051014 and 057013 are updated along w ith this counter. UPDATED: When the HANDOVER_PERFORMED message is sent to the MSC. See figure MT DTM call establishment. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode 051191 INTRA DTM MT PS TO PS TERRITORY HO 200 Since S12 INTRA DTM MT PS TO PS TERRITORY HO Number of successful internal intra-cell handovers started as part of a PS quality controlinitiated DTM call reallocation (DX cause number: 172). A CS-connection handover inside the PS territory is performed. Counters 051014 and 057013 are updated along w ith this counter.
UPDATED: When the HANDOVER_PERFORMED message is sent to the MSC. See figure DTM call reallocation; inadequate PS connection quality. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode 051192 INTRA DTM PS TO CS TERRITORY HO 201 Since S12 INTRA DTM PS TO CS TERRITORY HO Number of successful internal intra-cell handovers started as part of a DTM call release (DX cause number: 173). A CS-connection handover from the PS territory to the CS territory is performed. Counters 051014 and 057013 are updated along w ith this counter. UPDATED: When the HANDOVER_PERFORMED message is sent to the MSC. See figure DTM call release; packet data transfer end. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode 051193 EXT_OUT_DTM_NO_RES_AVAIL 202 Since S12 EXT_OUT_DTM_NO_RES_AVAIL Number of successful external outgoing handovers due to reason that there are no free PS resources available for a DTM call in the serving cell. UPDATED: When the CLEAR_COMPLETE message is sent to the MSC. DEPENDENCIES WITH OTHER COUNTERS: Counter 004195 is updated along w ith this counter. 051194 OUTGOING EXTERNAL DTM HO DUE DTM DISABLED 203 Since S12 OUTGOING EXTERNAL DTM HO DUE DTM Number of successful DISABLED outgoing external handovers started for DTM calls because DTM is being disabled in the serving cell (DX cause number: 196). Counters 051011 and 057010 are updated along w ith this counter. UPDATED: When the CLEAR_COMPLETE message is sent to the MSC. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode 051195 OUTGOING EXTERNAL DTM HO DUE PS QUALITY CONTROL 204 Since S12 OUTGOING EXTERNAL DTM HO DUE PS QUALITY CONTROL Number of successful outgoing external handovers started for DTM calls due to PS quality control in the serving cell (DX cause number: 197). Counters 051011 and 057010
are updated along w ith this counter. UPDATED: When the CLEAR_COMPLETE message is sent to the MSC. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode Number of successful outgoing external handovers started for DTM-capable mobile stations because the serving cell does not support DTM (DX cause number: 198). Counters 051011, 057010, and 004191 are updated along w ith this counter. UPDATED: When the CLEAR_COMPLETE message is sent to the MSC. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode 051197 OUTGOING EXTERNAL DTM HO TO WCDMA 206 Since S12 OUTGOING EXTERNAL DTM HO TO WCDMA Number of successful outgoing external handovers to WCDMA RAN for mobile stations that support WCDMA RAN, but not DTM (DX cause number: 199). Counters 051011 and 057010 are updated along w ith this counter UPDATED: When the CLEAR_COMPLETE message is sent to the MSC. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode 051198 INTER DTM HO DUE DTM DISABLED 207 Since S12 INTER DTM HO DUE DTM DISABLED Number of successful internal inter-cell handovers started for DTM calls because DTM is being disabled in the source cell (DX cause number: 240). Counters 051013 and 057012 are updated along w ith this counter. UPDATED: When the HANDOVER_PERFORMED message is sent to the MSC. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode 051199 INTER DTM HO DUE PS QUALITY 208 CONTROL Since S12 INTER DTM HO DUE PS QUALITY CONTROL Number of successful internal inter-cell handovers started for DTM calls due to PS quality control in the source cell (DX cause number: 241). Counters 051013 and 057012 are updated along w ith this counter.
205
Since S12
UPDATED: When the HANDOVER_PERFORMED message is sent to the MSC. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode Number of successful internal inter-cell handovers started for DTM-capable mobile stations because the source cell does not support DTM (DX cause number: 242). Counters 051013, 057012, and 004191 are updated along w ith this counter. UPDATED: When the HANDOVER_PERFORMED message is sent to the MSC. DOMAIN LEVEL FEATURES: BSS20088, Dual Transfer Mode 051201 PS PAGING REFUSED DUE BCSU39 BIG LOAD 300 Since S12 PS PAGING REFUSED DUE BCSU39 BIG LOAD Number of rejected PS paging messages inside the BCSU. UPDATED: When a broadcasted PS paging message from the Gb interface is rejected due to BCSU overload. DOMAIN LEVEL FEATURES: BSS20118, BSC3i 1000/2000 Number of rejected PS paging messages inside the BCSU. UPDATED: When a broadcasted PS paging message from the Gb interface is rejected due to BCSU overload. DOMAIN LEVEL FEATURES: BSS20118, BSC3i 1000/2000 051203 CS PAGING REFUSED DUE BCSU39 BIG LOAD 302 Since S12 CS PAGING REFUSED DUE BCSU39 BIG LOAD Number of rejected CS paging messages inside the BCSU. UPDATED: When a broadcasted CS paging message from the Gb interface is rejected due to BCSU overload. DOMAIN LEVEL FEATURES: BSS20118, BSC3i 1000/2000 051204 CS PAGING REFUSED DUE BCSU3A BIG LOAD 303 Since S12 CS PAGING REFUSED DUE BCSU3A BIG LOAD Number of rejected CS paging messages inside the BCSU. UPDATED: When a broadcasted CS paging message from the Gb interface is rejected due to BCSU overload. DOMAIN LEVEL FEATURES: BSS20118, BSC3i 1000/2000 051205 PS PAGING FROM A INT REFUSED DUE BCSU39 BIG LOAD 304 Since S12 PS PAGING FROM A INT REFUSED DUE BCSU39 BIG LOAD Number of paging messages from the A interface that are rejected inside the BCSU.
209
Since S12
301
Since S12
UPDATED: When a broadcasted paging message from the A interface is rejected due to BCSU overload. DOMAIN LEVEL FEATURES: BSS20118, BSC3i 1000/2000 Number of paging messages from the A interface that are rejected inside the BCSU. UPDATED: When a broadcasted paging message from the A interface is rejected due to BCSU overload. DOMAIN LEVEL FEATURES: BSS20118, BSC3i 1000/2000
305
Since S12
Printed from NED6 Copyright Nokia Siemens Netw orks. All rights reserved.