Professional Documents
Culture Documents
Fast Trak Customer Presentation
Fast Trak Customer Presentation
Features:
No need of amplification device( booster, quick exaust ..) in most application Superior control capacity of amplification device when installed High flow with quick, precise complete control capability Powerful self calibration software Wide set of configurable embedded features Strong design with full metal housing
24 July 2012
24 July 2012
Feedback sensor is mounted elastically and independent from feedback shaft therefore gets no load Strong shaft with long bearing guide takes all the load
Actual status
Tuning parameters
Diagnostic
Advanced options
8
24 July 2012
Tuning parameters
Actual status
10
Advanced options :
-Transfer function curve -Digital Input config -Digital Output config -Analog Output config -4-20mA Input calib -Split range
11
Graph Tool :
12
24 July 2012
FT specifications:
Power Supply/Signal : Signals Connections: Pneumatic Connect. Outputs: Operating angle: Communication: Air supply: Flow capacity: Bleed at steady state: Certifications & Qual. Protection Class: Ambient Temperature: Housing material: Weight: 4 to 20 mA (min.3,5 mA, 12-30V dc);HART 2x NPT (M20x1,5 on request) 3x NPT (1 supply+2 outputs) 4 to 20 mA pos. feedback+2 configurable digital (optocoupler 24V dc) 30to 120( <30possible with lower resolution) via Hart and TTL RS232 2,5 to 10 barg instrument air acc. ISO 8573-1, cl.3 180 Nm3/h at 6 barg ( Cv=2,3) 1,2 Nm3/h at 6 barg CE, Atex EEx.ia.IIC.T6/T5/T4 (intrinsecally safe) IP 66 -30 to +80 C C Aluminium, copper free 3,25 kg
13
14