Professional Documents
Culture Documents
Layer3 Message Dictionary A Interface - 112030064 - 04
Layer3 Message Dictionary A Interface - 112030064 - 04
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
: : : :
Alcatel 900/BSS PRODUCT DEFINITION SYS-TLA SYSTEM FUNTIONAL BLOCKS Internal : External :
ABSTRACT This document describes the layer 3 messages for the A interface. It is a working document and subject to change. It is invited that all comments are passed to the author for inclusion in future iterations.
S. BELLENS
DPM BSC
R. MAUGER
DPM SYT
MCD
1/41
REVIEW
Not applicable.
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
HISTORY
Release B1 Version 1.1.0.0 TLA/100 Date 29/05/91 Author Reason for update RSG APPROVED. + 2 Phase 1 CRQ: CRQ/689: Channel mode in ASSIGN CMD CRQ/696: Coding of MS power
S/P2/3.4.2.1 Date 29/07/92 Author Reason for update FIRST DRAFT FOR PHASE 2. This version includes only the new or modified messages for phase 2. Messages which were already in TLA/100 V.1.1.0.0, but which were not implemented in phase 1 (e.g. ESTABLISH REQUEST) are not considered as new messages for the dictionary. They are NOT included here if there is no modification.
3BK 11202 0044 DSZZA Date Author A. Jarvis Reason for update First draft for Release 3. This document has been converted from All-in-one to winword format. Due to its size the message dictionary has been split into three separate document. Air and ABIS interface messages are GSM phase 2. A interface messages are given for both GSM phase 1 and 2. Updated according to review TLAr3#9 held in Milan Minutes SYS/067
3.1.0.0
01/08/94
A. Jarvis
3BK 11202 0075 DSZZA Date 13/12/94 25/01/95 20/04/95 23/05/95 Author A. Jarvis A. Jarvis C. Demarez C. Demarez Reason for update First issue for this release based on V 3.1.0.0 Updated according to comments received. Updated according to comments received and to introduce half rate features. Updated according to review TLAr4#13 as stated in SYS/182. CRQ/1060 is included.
MCD
2/42
3BK 11202 0120 DSZZA Date 10/04/96 Author J.J. Roy Reason for update First issue for this release. Based on V 4.2.0.0 (3BK 11202 0075 DSZAA). CRQ/1431 : Introduction of the extended band CRQ/1612 : Cell Identity format in HANDOVER REQUEST CRQ/2138 : Ciphering key length checking CRQ/2305 : DCS 1900 operations Updated after review TLAr5#17 as stated in TD/SAS/LCR/1527.96
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Ed. 01 Released
19/08/96
J.J. Roy
Release B6.2 3BK 11202 0187 DSZZA Version Ed. 01 Proposal P1 Ed. 01 Released Ed. 02 Released Date 05/01/98 02/02/98 Author P. Fouilland P. Fouilland Reason for update First issue for this release based on B5 document. Document released according to minutes in TD/SAS/pfo/0166.98 and including miscellaneous minor editorial corrections. Updated including following approved CR: 3BKA20CBR035864, v2; 3BKA20CBR039129, v1; 3BKA20CBR047389, v1. Document checked by moderator B. Landais. No review report.
19/10/99
M. Wu
Release B7.2 3BK 11203 0064 DSZZA Version Ed. 01 Proposal P1 Date 26/01/01 Author M. Wu Reason for update First draft for Release B7: 1) Based on the B6 document (3BK 11202 0187 DSZZA, Ed02); 2) Align with the 3GPP TS (GERAN#2, R99). Document updated according to the minutes in MCD/JV/TD/R&T Europe/SYT/mwu /091.00/Ed.01. Document updated according to the minutes in MCD/JV/TD/R&T Europe/SYT/mwu/116.01/Ed.1 and checked by the moderator Raphalle MAUGER. Takes into account following approved CRs : 20/098533, 20/089914. Correction of inconsistencies (Phase 1 DCS1900 MS do not exist). Clarifications. Only editorial comments received. No review report. Inclusion of the following CRs: 3BKA20CBR097211 3BKA20CBR095617 Document updated according to review report TD/SYT/rma/0538.2001 Remove B7.1: Document released after reading cycle, checked by moderator R. Mauger, no review report. LAYER 3 MESSAGE DICTIONARY - A INTERFACE ED 04 Released
0064_04.DOC 31/05/02
07/02/01 14/02/01
M. Wu M. Wu
27/08/01
R. Mauger
18/09/01 30/10/01
R. Mauger S. Bourdeaut
R. Mauger M. Wu M. Wu
MCD
3/43
MCD
4/44
TABLE OF CONTENTS
INTERNAL REFERENCED DOCUMENTS....................................................................................... 4 REFERENCED DOCUMENTS ......................................................................................................... 5 1. 2. INTRODUCTION ...................................................................................................................... 6 1.1 Scope............................................................................................................................... 6 GENERAL PRESENTATION.................................................................................................... 6 2.1 Preliminaries ................................................................................................................... 6 2.2 Messages presentation................................................................................................... 6 2.2.1The general overview................................................................................................ 6 2.2.2The general description ............................................................................................. 7 2.2.3The information element description.......................................................................... 7 LIST OF THE MESSAGES....................................................................................................... 8 CROSS REFERENCE ON 08.08 INFORMATION ELEMENTS ...............................................11 DESCRIPTION OF THE HEADER ON THE A INTERFACE (GSM PH1 & PH2) .....................15 A INTERFACE MESSAGES ....................................................................................................18 6.1 ASSIGNMENT COMPLETE ............................................................................................19 6.1.1GENERAL DESCRIPTION (Phase 2 format)............................................................20 6.1.2GENERAL DESCRIPTION (Phase 1 format)............................................................21 6.1.3RR CAUSE ..............................................................................................................22 6.1.4CELL IDENTIFIER (new cell) ...................................................................................23 6.1.5CHOSEN CHANNEL................................................................................................25 6.1.6CHOSEN ENCRYPTION ALGORITHM....................................................................26 6.1.7SPEECH VERSION .................................................................................................26 6.2 ASSIGNMENT FAILURE.................................................................................................27 6.2.1GENERAL DESCRIPTION.......................................................................................28 6.2.2CAUSE ....................................................................................................................29 6.2.3RR CAUSE ..............................................................................................................30 6.3 ASSIGNMENT REQUEST ...............................................................................................31 6.3.1GENERAL DESCRIPTION (Phase 2 format)............................................................32 6.3.2GENERAL DESCRIPTION (Phase 1 format)............................................................34 6.3.3CHANNEL TYPE......................................................................................................35 6.3.4LAYER 3 HEADER INFORMATION .........................................................................39 6.3.5PRIORITY................................................................................................................40 6.3.6CIRCUIT IDENTITY CODE ......................................................................................41 6.3.7DOWNLINK DTX FLAG ...........................................................................................41 6.3.8CLASSMARK INFORMATION TYPE 2 (GSM PHASE 1 MS)...................................42 6.3.9CLASSMARK INFORMATION TYPE 2 (GSM PHASE 2 MS)...................................43 6.4 BLOCK............................................................................................................................46 6.4.1GENERAL DESCRIPTION.......................................................................................47 6.4.2CIRCUIT IDENTITY CODE ......................................................................................47 6.4.3CAUSE ....................................................................................................................48 6.5 BLOCKING ACKNOWLEDGE.........................................................................................49 6.5.1GENERAL DESCRIPTION.......................................................................................50 6.5.2CIRCUIT IDENTITY CODE ......................................................................................50 6.6 BSS INVOKE TRACE......................................................................................................51 6.6.1GENERAL DESCRIPTION.......................................................................................52 6.6.2TRACE TYPE ..........................................................................................................53 6.6.3FORWARD INDICATOR..........................................................................................54 LAYER 3 MESSAGE DICTIONARY - A INTERFACE ED 04 Released
0064_04.DOC 31/05/02
3. 4. 5. 6.
MCD
1/2181
6.7
6.8
6.9
6.10
6.11
6.12
6.13
6.14 6.15
6.16
6.17 6.18
6.19
6.20
6.6.4TRIGGERID.............................................................................................................54 6.6.5TRACE REFERENCE ..............................................................................................55 6.6.6TRANSACTIONID....................................................................................................55 6.6.7OMCID.....................................................................................................................56 CIPHER MODE COMMAND ............................................................................................57 6.7.1GENERAL DESCRIPTION (Phase 2 format)............................................................58 6.7.2GENERAL DESCRIPTION (Phase 1 format)............................................................58 6.7.3LAYER 3 HEADER INFORMATION .........................................................................59 6.7.4ENCRYPTION INFORMATION................................................................................60 6.7.5CIPHER RESPONSE MODE ...................................................................................61 CIPHER MODE COMPLETE ...........................................................................................62 6.8.1GENERAL DESCRIPTION (Phase 2 format)............................................................63 6.8.2GENERAL DESCRIPTION (Phase 1 format)............................................................63 6.8.3LAYER 3 MESSAGE CONTENTS ...........................................................................63 6.8.4CHOSEN ENCRYPTION ALGORITHM....................................................................64 CIPHER MODE REJECT .................................................................................................65 6.9.1GENERAL DESCRIPTION.......................................................................................66 6.9.2CAUSE ....................................................................................................................66 CIRCUIT GROUP BLOCK...............................................................................................67 6.10.1.........................................................................................GENERAL DESCRIPTION 6.10.2...................................................................................................................... CAUSE 6.10.3........................................................................................ CIRCUIT IDENTITY CODE 6.10.4................................................................................CIRCUIT IDENTITY CODE LIST CIRCUIT GROUP BLOCKING ACKNOWLEDGE............................................................71 6.11.1.........................................................................................GENERAL DESCRIPTION 6.11.2........................................................................................ CIRCUIT IDENTITY CODE 6.11.3................................................................................CIRCUIT IDENTITY CODE LIST CIRCUIT GROUP UNBLOCK..........................................................................................74 6.12.1.........................................................................................GENERAL DESCRIPTION 6.12.2........................................................................................ CIRCUIT IDENTITY CODE 6.12.3................................................................................CIRCUIT IDENTITY CODE LIST CIRCUIT GROUP UNBLOCKING ACKNOWLEDGE.......................................................77 6.13.1.........................................................................................GENERAL DESCRIPTION 6.13.2........................................................................................ CIRCUIT IDENTITY CODE 6.13.3................................................................................CIRCUIT IDENTITY CODE LIST CLASSMARK REQUEST ................................................................................................80 6.14.1.........................................................................................GENERAL DESCRIPTION CLASSMARK UPDATE...................................................................................................81 6.15.1...................................................................GENERAL DESCRIPTION (Phase 1 MS) 6.15.2................................GENERAL DESCRIPTION (Phase 2 MS, GSM Phase 2 format) 6.15.3................................GENERAL DESCRIPTION (Phase 2 MS, GSM Phase 1 format) 6.15.4..................................... CLASSMARK INFORMATION TYPE 2 (GSM PHASE 1 MS) 6.15.5..................................... CLASSMARK INFORMATION TYPE 2 (GSM PHASE 2 MS) 6.15.6...................................................................... CLASSMARK INFORMATION TYPE 3 CLEAR COMMAND.........................................................................................................94 6.16.1.........................................................................................GENERAL DESCRIPTION 6.16.2........................................................................... LAYER 3 HEADER INFORMATION 6.16.3...................................................................................................................... CAUSE CLEAR COMPLETE........................................................................................................97 6.17.1.........................................................................................GENERAL DESCRIPTION CLEAR REQUEST ..........................................................................................................98 6.18.1.........................................................................................GENERAL DESCRIPTION 6.18.2...................................................................................................................... CAUSE COMPLETE LAYER 3 INFORMATION .........................................................................100 6.19.1.........................................................................................GENERAL DESCRIPTION 6.19.2..................................................................................................... CELL IDENTIFIER 6.19.3.......................................................................................... LAYER 3 INFORMATION HANDOVER COMMAND ...............................................................................................105 LAYER 3 MESSAGE DICTIONARY - A INTERFACE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
ED
04
Released
0064_04.DOC 31/05/02
MCD
2/2182
6.21
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
6.22 6.23
6.24
6.25
6.26
6.27
6.28
6.29
ED
04
6.20.1.........................................................................................GENERAL DESCRIPTION 106 6.20.2.......................................................................................... LAYER 3 INFORMATION 106 HANDOVER COMPLETE..............................................................................................107 6.21.1.........................................................................................GENERAL DESCRIPTION 108 6.21.2................................................................................................................ RR CAUSE 108 HANDOVER DETECT ...................................................................................................109 6.22.1.........................................................................................GENERAL DESCRIPTION 109 HANDOVER FAILURE ..................................................................................................110 6.23.1.........................................................................................GENERAL DESCRIPTION 111 6.23.2...................................................................................................................... CAUSE 112 6.23.3................................................................................................................ RR CAUSE 113 HANDOVER PERFORMED ...........................................................................................114 6.24.1..................................................... GENERAL DESCRIPTION (GSM phase 2 format) 115 6.24.2..................................................... GENERAL DESCRIPTION (GSM phase 1 format) 116 6.24.3...................................................................................................................... CAUSE 117 6.24.4..................................................................................................... CELL IDENTIFIER 118 6.24.5.................................................................................................. CHOSEN CHANNEL 120 6.24.6......................................................................CHOSEN ENCRYPTION ALGORITHM 121 6.24.7................................................................................................... SPEECH VERSION 121 HANDOVER REQUEST ................................................................................................122 6.25.1..................................................... GENERAL DESCRIPTION (GSM phase 2 format) 124 6.25.2..................................................... GENERAL DESCRIPTION (GSM phase 1 format) 128 6.25.3........................................................................................................CHANNEL TYPE 131 6.25.4.................................................................................. ENCRYPTION INFORMATION 136 6.25.5...................................................................... CLASSMARK INFORMATION TYPE 1 137 6.25.6..................................... CLASSMARK INFORMATION TYPE 2 (GSM PHASE 1 MS) 138 6.25.7..................................... CLASSMARK INFORMATION TYPE 2 (GSM PHASE 2 MS) 139 6.25.8...................................... CELL IDENTIFIER SERVING, CELL IDENTIFIER TARGET 142 6.25.9..................................................................................................................PRIORITY 144 6.25.10...................................................................................... CIRCUIT IDENTITY CODE 145 6.25.11........................................................................................... DOWNLINK DTX FLAG 145 6.25.12.................................................................................................................... CAUSE 146 6.25.13.................................................................... CLASSMARK INFORMATION TYPE 3 147 6.25.14.................................................................................CURRENT CHANNEL TYPE 1 154 6.25.15................................................................................................. SPEECH VERSION 155 6.25.16.............................................................................Old BSS to New BSS information 156 HANDOVER REQUEST ACKNOWLEDGE ...................................................................160 6.26.1..................................................... GENERAL DESCRIPTION (GSM phase 2 format) 161 6.26.2..................................................... GENERAL DESCRIPTION (GSM phase 1 format) 161 6.26.3.......................................................................................... LAYER 3 INFORMATION 162 6.26.4.................................................................................................. CHOSEN CHANNEL 163 6.26.5......................................................................CHOSEN ENCRYPTION ALGORITHM 164 6.26.6................................................................................................... SPEECH VERSION 164 HANDOVER REQUIRED ...............................................................................................165 6.27.1..................................................... GENERAL DESCRIPTION (GSM phase 2 format) 166 6.27.2..................................................... GENERAL DESCRIPTION (GSM phase 1 format) 168 6.27.3...................................................................................................................... CAUSE 169 6.27.4............................................................................................. RESPONSE REQUEST 169 6.27.5...................................................................... CELL IDENTIFIER LIST PREFERRED 170 6.27.6...................................................................................CURRENT CHANNEL TYPE 1 173 6.27.7................................................................................................... SPEECH VERSION 174 6.27.8...............................................................................Old BSS to New BSS information 175 HANDOVER REQUIRED REJECT ................................................................................179 6.28.1.........................................................................................GENERAL DESCRIPTION 180 6.28.2...................................................................................................................... CAUSE 180 MSC INVOKE TRACE ...................................................................................................181 6.29.1.........................................................................................GENERAL DESCRIPTION 182 6.29.2............................................................................................................ TRACE TYPE 183 6.29.3............................................................................................................... TRIGGERID 184 LAYER 3 MESSAGE DICTIONARY - A INTERFACE Released
0064_04.DOC 31/05/02
MCD
3/2183
6.30
6.31
6.32 6.33
6.34 6.35
6.36
6.37
6.38
6.39
6.40
6.41
6.29.4................................................................................................ TRACE REFERENCE 6.29.5......................................................................................................TRANSACTIONID 6.29.6.................................................................................................... MOBILE IDENTITY 6.29.7.......................................................................................................................OMCID OVERLOAD...................................................................................................................187 6.30.1.........................................................................................GENERAL DESCRIPTION 6.30.2...................................................................................................................... CAUSE PAGING.........................................................................................................................189 6.31.1.........................................................................................GENERAL DESCRIPTION 6.31.2........................................................................................................................... IMSI 6.31.3.......................................................................................................................... TMSI 6.31.4.............................................................................................CELL IDENTIFIER LIST 6.31.5........................................................................................................... eMLPP Priority QUEUING INDICATION.................................................................................................198 6.32.1.........................................................................................GENERAL DESCRIPTION RESET...........................................................................................................................199 6.33.1.........................................................................................GENERAL DESCRIPTION 6.33.2...................................................................................................................... CAUSE RESET ACKNOWLEDGE..............................................................................................201 6.34.1.........................................................................................GENERAL DESCRIPTION RESET CIRCUIT ...........................................................................................................202 6.35.1.........................................................................................GENERAL DESCRIPTION 6.35.2........................................................................................ CIRCUIT IDENTITY CODE 6.35.3...................................................................................................................... CAUSE RESET CIRCUIT ACKNOWLEDGE ..............................................................................205 6.36.1.........................................................................................GENERAL DESCRIPTION 6.36.2........................................................................................ CIRCUIT IDENTITY CODE SAPI "n" REJECT .........................................................................................................207 6.37.1.........................................................................................GENERAL DESCRIPTION 6.37.2.......................................................................................................................... DLCI 6.37.3...................................................................................................................... CAUSE TRACE INVOCATION ...................................................................................................210 6.38.1..................................................... GENERAL DESCRIPTION (GSM phase 1 format) 6.38.2...................................................................................................... TRACE NUMBER UNBLOCK.....................................................................................................................212 6.39.1.........................................................................................GENERAL DESCRIPTION 6.39.2........................................................................................ CIRCUIT IDENTITY CODE UNBLOCKING ACKNOWLEDGE..................................................................................214 6.40.1.........................................................................................GENERAL DESCRIPTION 6.40.2........................................................................................ CIRCUIT IDENTITY CODE UNEQUIPPED CIRCUIT ................................................................................................216 6.41.1.........................................................................................GENERAL DESCRIPTION 6.41.2........................................................................................ CIRCUIT IDENTITY CODE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
184 185 185 186 188 188 190 191 192 193 196 198 200 200 201 203 203 204 206 206 208 208 209 211 211 213 213 215 215 217 217
7.
GLOSSARY...........................................................................................................................218
04 03 02 ED
CHANGE NOTE
MCD
4/2184
HISTORY
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
REFERENCED DOCUMENTS
Doctree references [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] 3BK 11202 0323 DSZZA 3BK 11202 0309 DSZZA 3BK 11202 0286 DSZZA 3BK 11202 0156 DSZZA 3BK 11202 0291 DSZZA 3BK 11202 0287 DSZZA 3BK 11202 0310 DSZZA 3BK 11202 0164 DSZZA 3BK 11202 0165 DSZZA 3BK 11202 0293 DSZZA 3BK 11202 0296 DSZZA 3BK 11202 0295 DSZZA 3BK 11202 0292 DSZZA 3BK 11202 0255 DSZZA 3BK 11202 0173 DSZZA 3BK 11202 0069 DSZZA 3BK 11202 0305 DSZZA 3BK 11202 0176 DSZZA 3BK 11202 0299 DSZZA 3BK 11203 0066 DSZZA 3BK 11202 0290 DSZZA 3BK 11202 0289 DSZZA 3BK 11203 0043 DSZZA Paging and Access Grant control Radio and Link Establishment Normal Assignment Ciphering procedure Call Release Channel Modification Classmark Handling Transparent message routing Short Message Point to Point Radio measurements DTX functional specification Power control and radiolink supervision Resource Allocation and Management Overload control Protocol Error Handling Trace invocation BSS Initialisation of the Telecom Part BSS Global Reset Reset Circuit, Blocking and Unequipped Circuit Layer 3 message dictionary - Air interface External channel change Internal channel change Alcatel BSS Application Document to GSM - General Overview
3GPP References [24] [25] [26] [27] 3GPP TS 04.18 Mobile radio interface layer 3 specification; Radio Resource Control Protocol 3GPP TS 08.58 Base Station Controller - Base Transceiver Station (BSC-BTS) interface; Layer 3 specification 3GPP TS 08.08 Mobile-services Switching Centre - Base Station System (BSS-MSC) interface; Layer 3 specification 3GPP TS 24.008 Mobile Radio Interface Layer 3 specification; Core Network Protocols
Note the versions of the 3GPP Technical Specifications are given in reference [23].
RELATED DOCUMENTS
None.
PREFACE
None. LAYER 3 MESSAGE DICTIONARY - A INTERFACE ED 04 Released
0064_04.DOC 31/05/02
MCD
5/2185
1. INTRODUCTION
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
1.1 SCOPE
This volume of the message dictionary details the non-transparent messages handled by the Alcatel BSS over the A interface. As for this release both GSM phase 1 and phase 2 formats are supported, this document shows both message formats where applicable.
MCD
6/2186
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
INFORMATION ELEMENT LIST : It is the list of all the Information Element. For each Information Element the following information is given : - Mandatory (M..) or Optional (O..), - Fixed (..F) or Variable length (..V), - Some short comments. - The length in bytes, IMPLEMENTATION MAXIMUM LENGTH : It is the total of all used information elements, mandatory or optional. When the length is fixed for all parameters, a unique value is given. When not, a range is given ("minimum length" "maximum length"). FOLLOWING EVENT : It is the description of following events (for specific procedure) for the normal and abnormal cases. TIMER : It is the name of the Timers (started or stopped) associated with the message. SPECIFICATION DOC. REF. : It is the reference of relevant ALCATEL document.
MCD
7/2187
A ASSIGNMENT COMPLETE ASSIGNMENT FAILURE ASSIGNMENT REQUEST B BLOCK BLOCKING ACKNOWLEDGE BSS INVOKE TRACE C CHANGE CIRCUIT CHANGE CIRCUIT ACKNOWLEDGE CIPHER MODE COMMAND CIPHER MODE COMPLETE CIPHER MODE REJECT CIRCUIT GROUP BLOCK CIRCUIT GROUP BLOCKING ACKNOWLEDGE CIRCUIT GROUP UNBLOCK CIRCUIT GROUP UNBLOCKING ACKNOWLEDGE CLASSMARK REQUEST CLASSMARK UPDATE CLEAR COMMAND CLEAR COMPLETE CLEAR REQUEST COMPLETE LAYER 3 INFORMATION COMMON ID CONFUSION CONNECTION ORIENTED INFORMATION CONNECTIONLESS INFORMATION H HANDOVER CANDIDATE ENQUIRE HANDOVER CANDIDATE RESPONSE HANDOVER COMMAND HANDOVER COMPLETE HANDOVER DETECT HANDOVER FAILURE HANDOVER PERFORMED HANDOVER REQUEST HANDOVER REQUEST ACKNOWLEDGE HANDOVER REQUIRED HANDOVER REQUIRED REJECT HANDOVER SUCCEEDED
not used
MCD
8/2188
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
L LOAD INDICATION LSA INFORMATION M MSC INVOKE TRACE O OVERLOAD P PAGING PERFORM LOCATION ABORT PERFORM LOCATION REQUEST PERFORM LOCATION RESPONSE Q QUEUING INDICATION R RESET RESET ACKNOWLEDGE RESET CIRCUIT RESET CIRCUIT ACKNOWLEDGE RESOURCE INDICATION RESOURCE REQUEST RESUME S SAPI "n" CLEAR COMMAND SAPI "n" CLEAR COMPLETE SAPI "n" REJECT SUSPEND T TRACE INVOCATION (GSM phase 1 message) U UNBLOCK UNBLOCKING ACKNOWLEDGE UNEQUIPPED CIRCUIT UPLINK REJECT COMMAND UPLINK RELEASE COMMAND UPLINK RELEASE INDICATION UPLINK REQUEST UPLINK REQUEST ACKNOWLEDGE UPLINK REQUEST CONFIRMATION UPLINK SEIZED COMMAND
not used not used not used not used not used not used not used
MCD
9/2189
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
V VGCS/VBS SETUP VGCS/VBS SETUP ACKNOWLEDGE VGCS/VBS SETUP ASSIGNMENT REQUEST VGCS/VBS SETUP ASSIGNMENT RESULT VGCS/VBS SETUP ASSIGNMENT FAILURE VGCS/VBS SETUP QUEUING INDICATION VGCS/VBS SETUP REFUSE
not used not used not used not used not used not used not used
MCD
10/2181 0
Cause
ASSIGNMENT FAILURE BLOCK CIPHER MODE REJECT CIRCUIT GROUP BLOCK CLEAR COMMAND CLEAR REQUEST HANDOVER FAILURE HANDOVER PERFORMED HANDOVER REQUEST HANDOVER REQUIRED HANDOVER REQUIRED REJECT OVERLOAD RESET RESET CIRCUIT SAPI "n" REJECT ASSIGNMENT COMPLETE COMPLETE LAYER 3 INFORMATION HANDOVER COMMAND HANDOVER PERFORMED HANDOVER REQUEST OVERLOAD HANDOVER REQUIRED PAGING PAGING ASSIGNMENT REQUEST HANDOVER REQUEST ASSIGNMENT COMPLETE HANDOVER REQUEST ACKNOWLEDGE HANDOVER PERFORMED COMPLETE LAYER 3 INFORMATION ASSIGNMENT COMPLETE CIPHER MODE COMPLETE HANDOVER REQUEST HANDOVER REQUEST ACKNOWLEDGE HANDOVER PERFORMED
Cell Identifier
Chosen Channel
MCD
11/2181 1
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
ASSIGNMENT REQUEST ASSIGNMENT COMPLETE BLOCK BLOCKING ACKNOWLEDGE CIRCUIT GROUP BLOCK CIRCUIT GROUP BLOCKING ACKNOWLEDGE CIRCUIT GROUP UNBLOCK CIRCUIT GROUP UNBLOCKING ACKNOWLEDGE HANDOVER REQUEST HANDOVER REQUEST ACKNOWLEDGE RESET CIRCUIT RESET CIRCUIT ACKNOWLEDGE UNBLOCK UNBLOCKING ACKNOWLEDGE UNEQUIPPED CIRCUIT CIRCUIT GROUP BLOCK CIRCUIT GROUP BLOCKING ACKNOWLEDGE CIRCUIT GROUP UNBLOCK CIRCUIT GROUP UNBLOCKING ACKNOWLEDGE UNEQUIPPED CIRCUIT CIPHER MODE COMMAND HANDOVER REQUEST ASSIGNMENT REQUEST CLASSMARK UPDATE HANDOVER REQUEST CLASSMARK UPDATE HANDOVER REQUEST ASSIGNMENT REQUEST HANDOVER REQUEST BLOCK HANDOVER REQUEST HANDOVER REQUIRED HANDOVER REQUIRED
MCD
12/2181 2
ASSIGNMENT REQUEST HANDOVER REQUEST PAGING CIPHER MODE COMMAND HANDOVER REQUEST
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Environment of BS "n" (phase 1 IE) HANDOVER REQUIRED Forward indicator Group call reference BSS INVOKE TRACE ASSIGNMENT REQUEST HANDOVER REQUEST PAGING ASSIGNMENT REQUEST HANDOVER REQUEST ASSIGNMENT REQUEST CIPHER MODE COMMAND CLEAR COMMAND COMPLETE LAYER 3 INFORMATION HANDOVER COMMAND HANDOVER REQUEST ACKNOWLEDGE CIPHER MODE COMPLETE MSC INVOKE TRACE BSS INVOKE TRACE MSC INVOKE TRACE HANDOVER REQUEST HANDOVER REQUIRED ASSIGNMENT REQUEST HANDOVER REQUEST
Layer 3 Information
Priority
Radio Channel Identity (phase 1 IE) ASSIGNMENT COMPLETE ASSIGNMENT REQUEST HANDOVER PERFORMED HANDOVER REQUEST LAYER 3 MESSAGE DICTIONARY - A INTERFACE ED 04 Released
0064_04.DOC 31/05/02
MCD
13/2181 3
Response Request
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
HANDOVER REQUIRED ASSIGNMENT COMPLETE ASSIGNMENT FAILURE HANDOVER COMPLETE HANDOVER FAILURE ASSIGNMENT COMPLETE HANDOVER REQUEST HANDOVER REQUEST ACKNOWLEDGE HANDOVER REQUIRED HANDOVER PERFORMED ASSIGNMENT REQUEST HANDOVER REQUEST PAGING TRACE INVOCATION (phase 1 message) BSS INVOKE TRACE MSC INVOKE TRACE BSS INVOKE TRACE MSC INVOKE TRACE BSS INVOKE TRACE MSC INVOKE TRACE BSS INVOKE TRACE MSC INVOKE TRACE
RR Cause
Speech version
Talker flag
Trace Type
TransactionId
TriggerId
MCD
14/2181 4
- Only one parameter : message type Message type uniquely identifies the message being sent. It is a single octet element, mandatory in all messages.
8 E
4 Message type
8 0
7 0
6 0
5 0
4 0
3 0
2 0
1 0
HANDOVER MESSAGES 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 10 11 12 13 14 15 16 17 18 19 1A 1B HANDOVER REQUEST HANDOVER REQUIRED HANDOVER REQUEST ACKNOWLEDGE HANDOVER COMMAND HANDOVER COMPLETE HANDOVER SUCCEEDED (not used) HANDOVER FAILURE HANDOVER PERFORMED HANDOVER CANDIDATE ENQUIRE (not used) HANDOVER CANDIDATE RESPONSE (not used) HANDOVER REQUIRED REJECT HANDOVER DETECT
MCD
15/2181 5
RELEASE MESSAGES 0
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
0 0 0 0 0 0 0
1 1 1 1 1 1 1
0 0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 1 1 1
0 0 1 1 0 0 1
0 1 0 1 0 1 0
20 21 22 23 24 25 26
CLEAR COMMAND CLEAR COMPLETE CLEAR REQUEST RESERVED (not used) RESERVED (not used) SAPI "N" REJECT CONFUSION (not used)
0 0 0 0 0 0
OTHER CONNECTION RELATED MESSAGES 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 28 29 2A 2B 2C 2D 2E 2F SUSPEND (not used) RESUME (not used) CONNECTION ORIENTED INFORMATION (not used) PERFORM LOCATION REQUEST (not used) LSA INFORMATION (not used) PERFORM LOCATION RESPONSE (not used) PERFORM LOCATION ABORT (not used) COMMON ID (not used)
GENERAL MESSAGES 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 1 1 1 1 0 0 0 1 1 0 0 1 1 1 0 1 0 1 0 1 0 1 0 30 31 32 33 34 35 36 37 3A RESET RESET ACKNOWLEDGE OVERLOAD TRACE INVOCATION (phase 1 only) RESET CIRCUIT RESET CIRCUIT ACKNOWLEDGE MSC INVOKE TRACE BSS INVOKE TRACE CONNECTIONLESS INFORMATION (not used)
TERRESTRIAL RESOURCE MESSAGES 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 40 41 42 43 44 45 46 47 48 49 4A BLOCK BLOCKING ACKNOWLEDGE UNBLOCK UNBLOCKING ACKNOWLEDGE CIRCUIT GROUP BLOCK CIRCUIT GROUP BLOCKING ACKNOWLEDGE CIRCUIT GROUP UNBLOCK CIRCUIT GROUP UNBLOCKING ACKNOWLEDGE UNEQUIPPED CIRCUIT CHANGE CIRCUIT (not used) CHANGE CIRCUIT ACKNOWLEDGE (not used)
MCD
16/2181 6
1 1 1 1 1 1 1 1 1 1 1
0 0 0 0 0 0 0 0 0 0 0
1 1 1 1 1 1 1 1 1 1 1
0 0 0 0 0 0 0 0 1 1 1
0 0 0 0 1 1 1 1 0 0 0
0 0 1 1 0 0 1 1 0 0 1
0 1 0 1 0 1 0 1 0 1 0
50 51 52 53 54 55 56 57 58 59 5A
RESOURCE REQUEST (not used) RESOURCE INDICATION (not used) PAGING CIPHER MODE COMMAND CLASSMARK UPDATE CIPHER MODE COMPLETE QUEUING INDICATION COMPLETE LAYER 3 INFORMATION CLASSMARK REQUEST CIPHER MODE REJECT LOAD INDICATION (not used)
0 0 0 0 0 0 0 0 0 0
VGCS/VBS 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 1 1 0 0 1 1 0 0 1 1 1 0 1 1 0 0 0 1 0 1 0 1 0 1 1 1 0 1 0 1 04 05 06 07 1C 1D 1E 1F 27 49 4A 4B 4C 4D VGCS/VBS SETUP (not used) VGCS/VBS SETUP ACK (not used) VGCS/VBS SETUP REFUSE (not used) VGCS/VBS used) ASSIGNMENT REQUEST (not
VGCS/VBS ASSIGNMENT RESULT (not used) VGCS/VBS ASSIGNMENT FAILURE (not used) VGCS/VBS QUEUING INDICATION (not used) UPLINK REQUEST (not used) UPLINK REQUEST ACKNOWLEDGE (not used) UPLINK REQUEST CONFIRMATION (not used) UPLINK RELEASE INDICATION (not used) UPLINK REJECT COMMAND (not used) UPLINK RELEASE COMMAND (not used) UPLINK SEIZED COMMAND (not used)
MCD
17/2181 7
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
MCD
0064_04.DOC 31/05/02
6. A INTERFACE MESSAGES
ASSIGNMENT COMPLETE -- A Interface ABIS A SCCP Connection 08.08 3.2.1.2 This message is sent from BSC to MSC and indicates that the requested assignment has been completed correctly. BSC
FUNCTION
DIRECTION
TYPE
Message type RR Cause Circuit identity Cell Identifier Chosen channel Chosen encryption algorithm Circuit Pool Speech version (chosen) LSA Identifier
MF OF OF OV OF OF OF OF OF
(1) not used always sent (2) (3) not used (4) not used
(4)
Only sent if received from the MS. Only sent when the channel type in the assignment request had requested a "Full or Half rate' code point. This will only be included if the MSC indicates that more than one ciphering algorithm is permitted. This possibility would have been indicated to the BSC in the Encryption Information IE contained in the last received HANDOVER REQUEST or CIPHER MODE COMMAND messages. Included at least when the speech version choice was done by the BSS.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT COMPLETE (A interface) 3BK 11203 0064 DSZZA 19/2181 9
MCD
7 0 0
6 0 0
5 0 1
4 0 0
3 0 1
2 1 0
1 0 1 optional
RR Cause 0 0 0 0 1 0 1 optional
LAC cont. CI value CI value cont. Chosen Channel Chosen Encrypt. Algo. 0 0 0 1 0 0 0 0 1 optional
Channel mode 0 1 0 1
Channel 1 0 0 optional
Algorithm Identifier
0 spare
optional
Note
3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT COMPLETE (A interface) 3BK 11203 0064 DSZZA 20/2182 0
MCD
7 0 0
6 0 0
5 0 1
4 0 0
3 0 1
2 1 0
1 0 1 optional
RR Cause 0 0 0 0 1 0 1
optional
LAC cont. CI value CI value cont. Note 1: Specific phase 1 IEs : Note 2: Radio channel identity : not used. Note 3: Three digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT COMPLETE (A interface) 3BK 11203 0064 DSZZA 21/2182 1
MCD
6.1.3 RR CAUSE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : O DEFINITION This element is passed from the air interface to the MSC transparently, when received from the MS. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 1 2 0 1 1
RR Cause SUB PARAMETER DEFINITION RR Cause the same value received (and same meaning) as the Assignment Complete on the Air Interface. PARAMETER ORIGIN - ACTION ON PARAMETER The RR Cause information, received from MS (in the "assignment complete" message), has been stored, and is given to the MSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT COMPLETE (A interface) 3BK 11203 0064 DSZZA 22/2182 2
MCD
SUB PARAMETER DEFINITION Cell identification discriminator 0000 0001 0010 0011 1000 1001 1010 1011 The whole cell global Identification, CGI Location Area Code, LAC, and Cell Identity, CI Cell Identity, CI No cell is associated with the transaction PLMN-ID, LAC and RNC-ID RNC-ID LAC and RNC-ID SAI (Serving Area Identity) of UE used used not used not used not used not used not used not used
All other values are reserved. Only the discriminator value 0 and 1 are used : Discriminator 0 : 4 5 6 7 8 9 10 Note MCC digit 2 MNC digit 3 (Note) MNC digit 2 MCC digit 1 MCC digit 3 4 5 6 7 Discriminator 1 : LAC LAC cont. CI value CI value cont.
3 digits MNC is supported. In case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
MCC, MNC : See 3GPP 24.008 LAC, Location area code : See 3GPP 24.008 ED 04 Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT COMPLETE (A interface) 3BK 11203 0064 DSZZA 23/2182 3
MCD
PARAMETER ORIGIN - ACTION ON PARAMETER The MSC requires the information from a specific cell controlled by the BSC. This info element is included even in case of mono-cell configuration. The choice between the use of cell discriminator 0 or 1 depends on the value of a BSS parameter.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT COMPLETE (A interface) 3BK 11203 0064 DSZZA 24/2182 4
MCD
TYPE : O DEFINITION Description of the channel allocated to the MS. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 0 3 0 2 0 1 1 1 2
Channel mode
Channel
SUB PARAMETER DEFINITION Channel mode Bit 8765 0000 No channel mode indication 0001 data, 29.0 kbit/s radio interface rate (not implemented) 0010 data, 32.0 kbit/s radio interface rate (not implemented) 0011 data, 43.5 kbit/s radio interface rate (not implemented) 0100 data, 43.5 kbit/s downlink and 14.5 kbit/s uplink (not implemented) 0101 data, 29.0 kbit/s downlink and 14.5 kbit/s uplink (not implemented) 0110 data, 43.5 kbit/s downlink and 29.0 kbit/s uplink (not implemented) 0111 data, 14.5 kbit/s downlink and 43.5 kbit/s uplink (not implemented) 1000 Signalling only 1001 Speech (FR or HR) 1010 data, 14.5 kbit/s downlink and 29.0 kbit/s uplink (not implemented) 1011 Data 12.0 kbit/s (radio interface rate) 1100 Data 6.0 kbit/s (radio interface rate) 1101 Data 3.6 kbit/s (radio interface rate) 1110 Data 14.5 kbit/s (radio interface rate) 1111 data, 29.0 kbit/s downlink and 43.5 kbit/s uplink (not implemented) All other values reserved Channel Bit 4321 0000 None (not used) 0001 SDCCH 0100 8 Full rate TCHs (not used) 1000 1 Full rate TCH 1001 1 Half rate TCH 1010 2 Full rate TCHs (not used) 1011 3 Full rate TCHs (not used) 1100 4 Full rate TCHs (not used) 1101 5 Full rate TCHs (not used) 1110 6 Full rate TCHs (not used) 1111 7 Full rate TCHs (not used) All other values reserved
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT COMPLETE (A interface) 3BK 11203 0064 DSZZA 25/2182 5
MCD
PARAMETER ORIGIN - ACTION ON PARAMETER This is a phase 2 IE. If GSM_PHASE = "GSM Phase 1", this IE is not sent.
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Algorithm Identifier SUB PARAMETER DEFINITION 8765 4321 0000 0001 0000 0010 0000 0011 0000 0100 0000 0101 0000 0110 0000 0111 0000 1000 All other values reserved Bit
No encryption used GSM A5/1 GSM A5/2 GSM A5/3 GSM A5/4 GSM A5/5 GSM A5/6 GSM A5/7
Not Supported Not Supported Not Supported Not Supported Not Supported
PARAMETER ORIGIN - ACTION ON PARAMETER Only included in the case of internal directed retry. This is a phase 2 IE. If GSM_PHASE = "GSM Phase 1", this IE is not sent.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT COMPLETE (A interface) 3BK 11203 0064 DSZZA 26/2182 6
MCD
SUB PARAMETER DEFINITION Speech version identifier is coded in the same way as the permitted speech version identifier in the Channel type information element. PARAMETER ORIGIN - ACTION ON PARAMETER This is a phase 2 IE. It is only included if the choice of the speech version was done by the BSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT COMPLETE (A interface) 3BK 11203 0064 DSZZA 27/2182 7
MCD
ASSIGNMENT FAILURE -- A Interface ABIS A SCCP Connection 08.08 3.2.1.3 Used by BSC to report failure of the assignment procedure. BSC
FUNCTION DIRECTION
TYPE
MF MF OF OF OV
MSC decides to cancel the procedure or to reallocate a new channel. Normal Assignment Internal Channel Change Channel Modification (ref. [3]) (ref. [22]) (ref. [6])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT FAILURE (A interface) 3BK 11203 0064 DSZZA 28/2182 8
MCD
8 0 0 CAUSE 0 RR CAUSE 0
7 0 0
6 0 0
5 0 0
4 0 0
3 0 1
2 1 0
1 1 0
RR Cause
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT FAILURE (A interface) 3BK 11203 0064 DSZZA 29/2182 9
MCD
6.2.2 CAUSE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : M DEFINITION To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
Length 0 SUB PARAMETER DEFINITION Used causes : 765 Class 000 : Normal event Radio Interface message failure Radio Interface failure O&M intervention Radio interface failure, reversion to old channel Class 010 : Resource unavailable Equipment failure No Radio resource available Requested terrestrial resources unavailable BSS not equipped Class 011 : Service or option not available Requested transcoding/rate adaption unavailable Circuit pool mismatch Requested speech version unavailable Class 100 : Service or option not implemented Ciphering Algorithm not supported Class 101 : Invalid message Terrestrial resource already allocated Class 110 : Protocol error Protocol error between BSC and MSC 000 000 000 000 010 010 010 010 011 011 011 100 101 110 4321 0000 0001 0111 1010 0000 0001 0010 0101 0000 0001 0011 0000 0000 0000 Cause value
PARAMETER ORIGIN - ACTION ON PARAMETER Only this format is used (no extension).
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT FAILURE (A interface) 3BK 11203 0064 DSZZA 30/2183 0
MCD
6.2.3 RR CAUSE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : O DEFINITION This element is passed from the air interface to the MSC transparently, when received from the MS. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 1 2 0 1 1
RR Cause SUB PARAMETER DEFINITION RR Cause same value (and same meaning) as Assignment Failure on the Air Interface. PARAMETER ORIGIN - ACTION ON PARAMETER The RR Cause information, received from MS (in the "assignment failure" message), has been stored, and is given to the MSC. This element is optional because the BSC may send the "assignment failure" message without having received the same message from the MS.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT FAILURE (A interface) 3BK 11203 0064 DSZZA 31/2183 1
MCD
ASSIGNMENT REQUEST ABIS A SCCP Connection 08.08 3.2.1.1 Used by the MSC to the BSC in order to request the BSS to assign radio resource, the attributes of which are defined within the message. BSC
FUNCTION
DIRECTION
TYPE
Message type Channel Type Layer 3 Header Info Priority Circuit Identity Code Downlink DTX Flag Interf. band to be used Classmark info 2 Group call reference Talker flag Configuration Evolution Indication LSA Access Control Suppression Service Handover
MF MV OF OF OF OF OF OV OF OF OF OF OF
not used not used not used not used not used not used
ABNORMAL SITUATION
TIMER
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 32/2183 2
MCD
8 0 0
7 0 0
6 0 0
5 0 0
4 0 1
3 0 0
2 0 1
1 1 1
Length Channel Type spare Speech or data indicator Channel rate and type option
Speech
Data
7 6 5 4 3 2 1 Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier 0 0 0 0
8 Ext Ext
7
T/NT
6 spare
4 Rate
1 optional
Layer 3 Header Information 0 0 0 Priority spare Circuit Identity Code Downlink DTX Flag 0 0 0 pci 0 0 0 0 0 0 0 0
optional
PCM Multiplex in use (high part) (low part) 0 0 0 0 1 0 1 0 TS in use 0 0 0 0 1 DTX Flag
optional
optional
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 33/2183 3
MCD
Classmark Information Type 2 OR (Phase 2 MS) 0 0 0 Revision level 0 0 0 spare spare spare
Length = 2 Encryption Algorithm 0 SM. spare cap 1 0 RF power Capability Frequency capability optional
Length = 3 Classmark Information Type 2 0 spare 0 spare CM3 Revision ESA5/1 level IND PS SS Screen SM. Capa Indicator cap 0 LCSVA UCS2 SoLSA spare CAP RF power Capability VBS VGC FC S
CMSP
optional
A5/3
A5/2
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 34/2183 4
MCD
7 0 0
6 0 0
5 0 0
4 0 1
3 0 0
2 0 1
1 1 1
0 0
Length Channel Type spare Speech or data indicator Channel Rate and type option
Speech
Data
7 6 5 4 3 2 1 Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier 0 0 0 0
8 Ext
7
T/NT
4 Rate
1 optional
Layer 3 Header Information 0 0 0 Priority Spare Circuit Identity Code Downlink DTX Flag 0 0 0 0 0 0 0 0 0 0 0
optional
PCM Multiplex in use (high part) (low part) 0 0 0 0 1 0 1 0 TS in use 0 0 0 0 1 DTX Flag
optional
optional
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 35/2183 5
MCD
TYPE : M DEFINITION This element contains all of the information that the BSC requires to determine the radio resource that is required. BIT DESCRIPTION 1 2 3 4 spare 0 0 0 0 1 0 1 1
Speech
Data
7 6 5 4 3 2 1 Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier
8 Ext Ext
7
T/NT
6 spare
4 Rate
SUB PARAMETER DEFINITION Speech or data indicator (octet 3) : 0001 Speech 0010 Data 0011 Signalling All other values are reserved. For values 0001 (Speech) and 0010 (Data), a dedicated terrestrial resource is also required.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 36/2183 6
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Channel rate and type (octet 4) : If octet 3 indicates signalling then octet 4 shall be coded as : 0000 0000 SDCCH or Full rate TCH channel Bm or Half rate TCH channel Lm 0000 0001 SDCCH 0000 0010 SDCCH or Full rate TCH channel Bm 0000 0011 SDCCH or Half rate TCH channel Lm 0000 1000 Full rate TCH channel Bm (not used) 0000 1001 Half rate TCH channel Lm (not used) 0000 1010 Full or Half rate TCH, FR preferred, changes allowed (not used) 0000 1011 Full or Half rate TCH, HR preferred, changes allowed (not used) 0001 1010 Full or Half rate TCH, FR preferred, changes not allowed (not used) 0001 1011 Full or Half rate TCH, HR preferred, changes not allowed (not used) All other values are reserved. If octet 3 indicates speech then octet 4 shall be coded as: 0000 1000 Full rate TCH channel Bm. Preference between permitted speech versions or full rate TCH as indicated in octet 5, 5a ... 0000 1001 Half rate TCH channel Lm. Preference between permitted speech versions or half rate TCH as indicated in octet 5, 5a ... 0000 1010 Full or Half rate TCH channel, Full rate preferred, changes allowed... Preference between permitted speech versions for the respective channel rates as indicated in octet 5, 5a ... 0000 1011 Full or Half rate TCH channel, Half rate preferred, changes allowed... Preference between permitted speech versions for the respective channel rates as indicated in octet 5, 5a ... 0000 1111 Full or Half rate TCH channel, changes allowed ... Preference between permitted speech versions as indicated in octet 5, 5a ... 0001 1010 Full or Half rate TCH channel, Full rate preferred, changes not allowed... Preference between permitted speech versions for the respective channel rates as indicated in octet 5, 5a ... 0001 1011 Full or Half rate TCH channel. Half rate preferred, changes not allowed... Preference between permitted speech versions for the respective channel rates as indicated in octet 5, 5a ... 0001 1111 Full or Half rate TCH channel, changes not allowed ... Preference between permitted speech versions as indicated in octet 5, 5a ... All other values are reserved. If octet 3 indicates data then octet 4 shall be coded as: 0000 1000 Full rate TCH channel Bm 0000 1001 Half rate TCH channel Lm (not used) 0000 1010 Full or Half rate TCH channel, Full rate preferred, changes allowed 0000 1011 Full or Half rate TCH channel, Half rate preferred, changes allowed 0001 1010 Full or Half rate TCH channel, Full rate preferred, changes not allowed 0001 1011 Full or Half rate TCH channel. Half rate preferred, changes not allowed 0010 0xxx FR multislot, changes allowed (not used) 0011 0xxx FR multislot, changes not allowed (not used) with : xxx 000 1 TCH 001 2 TCHs 010 3 TCHs 011 4 TCHs 100 5 TCHs 101 6 TCHs 110 7 TCHs 111 8 TCHs All other values are reserved.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 37/2183 7
MCD
For speech : octets 5, 5a, ... : Ext 0 No extension (last octet ) 1 Extension, additional octet(s)
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
765 4321 000 0001 GSM speech full rate version 1 001 0001 GSM speech full rate version 2 010 0001 GSM speech full rate version 3 000 0101 GSM speech half rate version 1 001 0101 GSM speech half rate version 2 (not used) 010 0101 GSM speech half rate version 3 All other values are reserved For a data call : octet 5, 5a : Ext 0 No extension (last octet ) 1 extension, additional octet(s) T/NT 0 1 Transparent Service Non transparent Service
Non multislot, non-transparent service : bits 6-1 indicate the radio interface data rate; 65 4321 00 0000 12 kbits/s for TCH FR 6 kbits/s for TCH HR (not used) 01 0000 12 kbits/s 01 0001 6 kbits/s (not used) 01 1000 14.5 kbit/s (not used) 11 0001 29 kbits/s (not used) 11 0100 43.5 kbit/s (not used) All other values are reserved. Non multislot, transparent service : bits 6-1 indicate the data rate; 65 4321 01 0000 9.6 kbits/s 01 0001 4.8 kbits/s 01 0010 2.4 kbits/s 01 0011 1.2 kbits/s 01 0100 600 bits/s 01 0101 1200/75 bit/s (1200 downlink, 75 uplink) (not used) 01 1000 14.4 kbit/s (not used) 11 1001 28.8 kbit/s (not used) 11 1010 32.0 kbit/s (not used) All other values are reserved. Multislot, non-transparent service : bits 6-1 (octet 5) indicate the radio interface data rate; 65 4321 01 0110 58 / 58 kbit/s (4x14.5 kbit/s or 2 x29.0 kbit/s), not used 01 0100 48.0 / 43.5 / 43.5 kbit/s (4x12 kbit/s or 3x14.5 kbit/s or 1x43.5 kbit/s), not used 01 0011 36 / 29 / 29 kbit/s (3x12 kbit/s or 2x14.5 kbit/s or 1 x 29.0 kbit/s), not used 01 0010 24.0 / 24.0 kbit/s (4x6 kbit/s or 2x12 kbit/s), not used 01 0001 18.0 / 14.5 kbit/s (3x6 kbit/s or 1x14.5 kbit/s), not used 01 0000 12.0 / 12.0 kbits/s (2x6 kbit/s or 1x12 kbit/s), not used All other values are reserved.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 38/2183 8
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Multislot, transparent service bits 6-1 (octet 5) indicate the data rate; 65 4321 01 1111 64 kbit/s, bit transp. (not used) 01 1110 56 kbit/s, bit transp. (not used) 01 1101 56 kbit/s (not used) 01 1100 48 kbit/s (not used) 01 1011 38.4 kbit/s (not used) 01 1010 28.8 kbit/s (not used) 01 1001 19.2 kbit/s (not used) 01 1000 14.4 kbit/s (not used) 01 0001 32 kbit/s (not used) 01 0000 9.6 kbit/s (not used) All other values are reserved. Octet 5a : Bit 8 reserved for extension, set to value 0 (= no extension) for this message. Allowed radio interface data rate : Bit 7 : 0 14.5/14.4 kbit/s not allowed (not used) 1 43.5 kbit/s (TCH/F43.2) allowed (not used) Bit 6 : 0 32.0 kbit/s (TCH/F32.0) not allowed (not used) 1 32.0 kbit/s (TCH/F32.0) allowed (not used) Bit 5 : 0 29.0 kbit/s (TCH/F28.8) not allowed (not used) 1 29.0 kbit/s (TCH/F28.8) allowed (not used) Bit 4 : 0 14.5/14.4 kbit/s (TCH/F14.4) not allowed (not used) 1 14.5/14.4 kbit/s (TCH/F14.4) allowed (not used) Bit 3 : 0 Spare Bit 2 : 0 12.0/9.6 kbit/s not allowed (not used) 1 12.0/9.6 kbit/s allowed (not used) Bit 1 : 0 6.0/4.8 kbit/s not allowed (not used) 1 6.0/4.8 kbit/s allowed (not used)
PARAMETER ORIGIN - ACTION ON PARAMETER Stored in order to be able to allocate the required channel. Use for the sending of the "Channel Activation" message to the BTS and the "Assignment Command" message to the MS.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 39/2183 9
MCD
TYPE : O DEFINITION This element is used to supply the BSS with information that needs to be included in the header of layer 3 messages over the radio interface. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 1 1 1
SUB PARAMETER DEFINITION Protocol Discriminator and Transaction Identifier are used in order to have information for the sending of the "Assignment Command" message to the MS. Refer to the general part at the beginning of this dictionary. PARAMETER ORIGIN - ACTION ON PARAMETER 3GPP TS 08.08 states that this IE has no useful purpose. Thus contents of this information element will be ignored by the BSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 40/2184 0
MCD
6.3.5 PRIORITY
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : O DEFINITION Definition of the priority of the request for traffic channels only. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 1 1 0
SUB PARAMETER DEFINITION pci = Preemption Capability indicator 0 this allocation request shall not pre-empt an existing connection 1 this allocation request may preempt an existing connection priority level: 6543 0000 0001 0010 :::: 1110 1111
spare priority level 1 = highest priority priority level 2 = second highest priority priority level 14 = lowest priority priority not used
if queuing is allowed (qa =1) and priority =1111 then lowest priority is assigned. if queuing is allowed (qa =1) and priority =0000 then lowest priority is assigned. qa = queuing allowed indicator 0 queuing not allowed 1 queuing allowed pvi = Preemption Vulnerability Indicator 0 this connection shall not be pre-empted by another allocation request 1 this connection might be pre-empted by another allocation request PARAMETER ORIGIN - ACTION ON PARAMETER - Taken into account in order to queue, if needed, the message. - pvi and pci bits are taken into account by the BSC for resource pre-emption when the eMLPP feature is activated.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 41/2184 1
MCD
TYPE : O DEFINITION Defines the terrestrial channel over which the call will pass. BIT DESCRIPTION
8 0
7 0
6 0
5 0
4 0
3 0
2 0
1 1
PCM multiplex in use (high part) (low part) SUB PARAMETER DEFINITION PCM Multiplex TS in use defines the terrestrial channel TS in use
PARAMETER ORIGIN - ACTION ON PARAMETER Stored for further usage. Control if terrestrial channel is already in use. In case of Signalling Channel type, the BSC reacts at the reception of this parameter with an ASSIGNMENT FAILURE (cause protocol error).
Bits 2 to 8 spare are set to 0. Bit 1 = 1 : DTX disabled in downlink direction 0 : DTX enabled in downlink direction
PARAMETER ORIGIN - ACTION ON PARAMETER It has to be included only for speech and not for signalling. In case of speech, the DTX is sent to the BTS in the "CHANNEL ACTIVATION" message. From the B7.2, the BSC does not take into account the value of the DTXd flag coming from the MSC, but only the flag coming from the OMC. LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 42/2184 2
ED
04
Released
0064_04.DOC 31/05/02
MCD
TYPE : O DEFINITION : Defines certain attributes of the Mobile Station equipment in use on a particular transaction as given by a MS supporting GSM phase 1. BIT DESCRIPTION 8 0 7 0 6 0 5 1 Length Revision level 0 Encryption Algorithm 0 SM. cap RF power Capability Frequency capability 4 0 3 0 2 1 1 0 1 2 3 4
SUB PARAMETER DEFINITION Revision level : 0 0 0 Reserved for phase 1. All other values reserved Encryption Algorithm : 00 Algorithm A5/1 All other values reserved. RF Power capability : BCCH = GSM900 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 0 1 1 class 4 1 0 0 class 5 All other values reserved BCCH = DCS1800 0 0 0 class 1 0 0 1 class 2 All other values reserved SM Capability : 0 short message capability not present 1 short message capability present FC Frequency Capability : 0 0 0 Band no 0 All other values reserved PARAMETER ORIGIN - ACTION ON PARAMETER This is the classmark information type 2 as sent by a phase 1 MS. The BSC takes this information in order to have the MS power capability for the power control and algorithm information. Note: The BSC will decode this IE as if it was a phase 2 classmark info IE. LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 43/2184 3
ED
04
Released
0064_04.DOC 31/05/02
MCD
TYPE : O DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 7 0 6 0 5 1 Length 0 spare 0 spare CM3 Revision ES-IND A5/1 level PS SS Screen. SM. Capa. Indicator cap 0 LCS UCS2 SoLSA spare VA CAP RF power Capability VGCS A5/3 4 0 3 0 2 1 1 0 1 2 3 FC A5/2 4 5
VBS CMSP
SUB PARAMETER DEFINITION Revision level : 00 Reserved for phase 1. 01 Used by phase 2 mobiles 10 Used by mobile stations supporting R99 or later versions of the protocol All other values reserved ES-IND : 0 1 A5/1 : 0 1 algorithm A5/1 available algorithm A5/1 not available. Controlled Early Classmark Sending option not implemented Controlled Early Classmark Sending option implemented
RF Power capability : BCCH = GSM900 and GSM850 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 0 1 1 class 4 1 0 0 class 5 All other values reserved BCCH = DCS1800 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 (handled as class 1 by the Alcatel BSS) All other values reserved
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 44/2184 4
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
BCCH = DCS1900 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 (handled as class 1 by the Alcatel BSS) All other values reserved PS Capability (Pseudo-Synchronization) : 0 PS capability not present 1 PS capability present Not checked by the BSC. SS Screening Indicator : 00 01 10 11 Not checked by the BSC. SM Capability : 0 MS does not support mobile terminated point to point SMS 1 MS supports mobile terminated point to point SMS VBS Voice Broadcast Service 0 no VBS capability or no notifications wanted 1 VBS capability and notifications wanted Not checked by the BSC. VGCS Voice Group Call Service 0 no VGCS capability or no notifications wanted 1 VGCS capability and notifications wanted Not checked by the BSC. FC Frequency Capability : GSM900 0 The MS does not support the extension band G1 in addition to the primary GSM band. 1 The MS does support the extension band G1. DCS1800, DCS1900, GSM850 0 Reserved for future use Note: only FC is checked in this release and only in GSM900 configuration. CM3 Classmark 3 : 0 No additional MS capability 1 Additional MS capabilities are described in the classmark 3 information element. LCS VA CAPability (LCS value added location request notification capability). Required for MS supporting GSM. 0 LCS value added location request notification capability not supported 1 LCS value added location request notification capability supported Not checked by the BSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 45/2184 5
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
UCS2 treatment: Required for MS suppporting UMTS. 0 the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2. 1 the ME has no preference between the use of the default alphabet and the use of UCS2. Not checked by the BSC. SoLSA: Required for MS suppporting GSM. 0 The ME does not support SoLSA. 1 The ME supports SoLSA. CMSP: CM Service Prompt 0 "Network initiated MO CM connection request" not supported. 1 "Network initiated MO CM connection request" supported for at least one CM protocol. Not checked by the BSC. A5/3 : 0 A5/3 ciphering algorithm not available 1 A5/3 ciphering algorithm available Not checked by the BSC. A5/2 : 0 1 A5/2 ciphering algorithm not available A5/2 ciphering algorithm available
PARAMETER ORIGIN - ACTION ON PARAMETER The BSC takes this information in order to have the MS power capability for the power control and algorithm information, the MS frequency capability and the MS ciphering capability. Default values are used for 'revision level', 'RF Power Capability' and MS cipher capability if the BSC can not decode these fields (see reference [7]). Additional mobile info can be obtained by invoking the classmark enquiry procedure.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE ASSIGNMENT REQUEST 3BK 11203 0064 DSZZA 46/2184 6
MCD
6.4 BLOCK
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
BLOCK ABIS A SCCP Connectionless 08.08 3.2.1.4 This message is sent from the BSS to the MSC to indicate that a particular terrestrial resource must be blocked at the MSC and cannot therefore be used for traffic.
FUNCTION
DIRECTION
BSC
TYPE
MF MF MF OF
not used
1 3 3 1 7
ABNORMAL SITUATION
TIMER
Blocking Acknowledge
T1_short T1_long
T1 starts at BLOCK sending and is stopped upon reception of the BLOCKING ACKNOWLEDGE.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE BLOCK 3BK 11203 0064 DSZZA 47/2184 7
MCD
7 1 0
6 0 0
5 0 0
4 0 0
3 0 0
2 0 0
1 0 1
SUB PARAMETER DEFINITION PCM Multiplex TS in use defines the terrestrial channel
PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is given to the MSC in order to report a failure on a specific terrestrial channel.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE BLOCK 3BK 11203 0064 DSZZA 48/2184 8
MCD
6.4.3 CAUSE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : M DEFINITION To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
Length 0 SUB PARAMETER DEFINITION Used causes : 765 Class 000 : Normal event - O&M intervention Class 010 : Resource unavailable - Requested terrestrial resources unavailable PARAMETER ORIGIN - ACTION ON PARAMETER Only this format is used (no extension). 000 010 4321 0111 0010 Cause Value
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE BLOCK 3BK 11203 0064 DSZZA 49/2184 9
MCD
BLOCKING ACKNOWLEDGE ABIS A SCCP Connectionless 08.08 3.2.1.5 This message is sent from the MSC to the BSS to acknowledge the receipt of an earlier block message and to indicate that the circuit concerned has been removed from service.
FUNCTION
DIRECTION
BSC
TYPE
MF MF
1 3
ABNORMAL SITUATION
TIMER
T1_short T1_long
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE BLOCKING ACKNOWLEDGE 3BK 11203 0064 DSZZA 50/2185 0
MCD
7 1 0
6 0 0
5 0 0
4 0 0
3 0 0
2 0 0
1 1 1
PCM multiplex in use (high part) (low part) SUB PARAMETER DEFINITION PCM Multiplex TS in use defines the terrestrial channel TS in use
PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is given to the BSC in order to recognise this message from a previous block message.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE BLOCKING ACKNOWLEDGE 3BK 11203 0064 DSZZA 51/2185 1
MCD
BSS INVOKE TRACE ABIS A SCCP Connection 08.08 3.2.1.28 This message is sent from the BSC to MSC to request the start of a trace procedure at the MSC.
FUNCTION
DIRECTION
BSC
TYPE
Header MF Trace type MF Forward indicator OF TriggerId OV Trace reference MF TransactionId OF OMCId OV IMPLEMENTATION MAXIMUM LENGTH
1 2 2 3-22 3 4 3-22
ABNORMAL SITUATION
TIMER
Trace Invocation
(ref. [16])
(1) Not used by the BSC but if received, they are copied to the trace record.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE BSS INVOKE TRACE 3BK 11203 0064 DSZZA 52/2185 2
MCD
7 0 0
6 1 1
5 1 0
4 0 0
3 1 1
2 1 0
1 1 1
Trace Reference
0 Trace
OMCId
optional
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE BSS INVOKE TRACE 3BK 11203 0064 DSZZA 53/2185 3
MCD
Trace type This IE is compliant with 3GPP TS 08.08. SUB PARAMETER DEFINITION Trace type Bit 1 indicates priority
0 1
Bit 5 indicates the necessity of radio measurements 0 events excluding radio measurements. 1 events including radio measurements. In this message bit 1 is always 0 and bit 5 is always 1 when sent to the MSC. PARAMETER ORIGIN - ACTION ON PARAMETER Bit 1 and bit 5 are ignored when received from the MSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE BSS INVOKE TRACE 3BK 11203 0064 DSZZA 54/2185 4
MCD
TYPE : O DEFINITION A fixed length element indicating whether the trace is to be continued in a BSS to which the call has been handed over. BIT DESCRIPTION 8 0 7 0 Spare SUB PARAMETER DEFINITION Octet 2 is coded as follows: bit 4321 0001 forward to subsequent BSS, no trace at MSC supported 0010 forward to subsequent BSS, and trace at MSC not supported All other values are reserved. Bits 5-8 are spare. PARAMETER ORIGIN - ACTION ON PARAMETER The contents of this IE are ignored if received from the MSC. 6 1 5 0 4 1 3 0 2 1 1 1
Forward Indicator
6.6.4 TRIGGERID
TYPE : O DEFINITION A variable length element indicating the identity of the entity which initiated the trace. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 0 3 1 2 1 1 0 octet 1 2 3-22
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE BSS INVOKE TRACE 3BK 11203 0064 DSZZA 55/2185 5
MCD
TYPE : M DEFINITION Reference used to identify the connection being traced. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 0 3 1 2 1 1 1 octet 1 2-3
Trace Reference SUB PARAMETER DEFINITION A fixed length trace reference number allocated by the triggering entity. PARAMETER ORIGIN - ACTION ON PARAMETER
6.6.6 TRANSACTIONID
TYPE : O DEFINITION A potentially variable length element indicating a particular transaction within a trace. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 1 3 0 2 0 1 0 Octet 1 2 3-4
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE BSS INVOKE TRACE 3BK 11203 0064 DSZZA 56/2185 6
MCD
6.6.7 OMCID
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : O DEFINITION A variable length element indicating the destination OMC to which trace information is to be sent. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 1 3 0 2 1 1 0 Octet 1 2 3-22
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE BSS INVOKE TRACE 3BK 11203 0064 DSZZA 57/2185 7
MCD
CIPHER MODE COMMAND ABIS A SCCP Connection 08.08 3.2.1.30 This message is sent from MSC to BSC via the relevant SCCP connection associated with that MS transaction. It updates the encryption parameters for the concerned MS.
FUNCTION
DIRECTION
BSC
TYPE
Message type Layer 3 header Information Encryption Information Cipher response mode
MF OF MF OF
1 4 11 2 18
ABNORMAL SITUATION
TIMER
Send CIPHER MODE REJECT (phase 2 MSC) or discard message (phase 1 MSC) (ref. [4])
Ciphering Procedure
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIPHER MODE COMMAND 3BK 11203 0064 DSZZA 58/2185 8
MCD
7 1 0
6 0 0
5 1 0
4 0 0
3 0 1
2 1 1
1 1 1
Length (1 <= value <= 9) Encryption Information : Key (continued) Cipher response mode 0 0 1 0 0 0 1 1 Optional Permitted Algorithms Key :
Length (1 <= value <= 9) Encryption Information : Key (continued) Permitted Algorithms Key :
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIPHER MODE COMMAND 3BK 11203 0064 DSZZA 59/2185 9
MCD
TYPE : O (GSM phase 2), M (GSM phase 1) DEFINITION This element is used to supply the BSS with information that needs to be included in the header of layer 3 messages over the radio interface. BIT DESCRIPTION 8 1 2 3 4 0 0 0 0 0 0 0 7 0 6 0 5 0 4 0 3 1 2 1 1 1
SUB PARAMETER DEFINITION Protocol Discriminator and Transaction Identifier are used in order to have information for the sending of the "Ciphering Mode Command" message to the MS. Refer to the general part at the beginning of this dictionary. PARAMETER ORIGIN - ACTION ON PARAMETER Contents of this information element will be ignored by the receiver (BSC).
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIPHER MODE COMMAND 3BK 11203 0064 DSZZA 60/2186 0
MCD
TYPE : M DEFINITION This element contains the user data encryption information used to control any encryption equipment at the BSS. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 1 3 0 2 1 1 0
Length (1 <= value <= 9) Permitted algorithms Key : Key (continued) SUB PARAMETER DEFINITION Permitted Algorithms Bit no 1 2 3 4 5 6 7 8 :
no encryption required GSM A5/1 GSM A5/2 GSM A5/3 GSM A5/4 GSM A5/5 GSM A5/6 GSM A5/7
Not supported Not supported Not supported Not supported Not supported
A bit position encoded as 1 indicates that the BSS may use the encryption algorithm represented by that bit position. A bit position encoded as 0 indicates that the BSS shall not use the encryption algorithm represented by that bit position. A permitted algorithms octet containing all bits encoded as 0 shall not be used. The key shall not exceed 8 octets. PARAMETER ORIGIN - ACTION ON PARAMETER Stored at the BSC in order to be able to give the information to the BTS (during internal Handover for example, or when the BSC allocates a TCH).
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIPHER MODE COMMAND 3BK 11203 0064 DSZZA 61/2186 1
MCD
TYPE : O DEFINITION This element is used by the MSC to indicate whether the IMEISV is to be included in the CIPHERING MODE COMPLETE message to be sent by the mobile station. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 0 3 0 2 1 1 1 1 2
Cipher response mode SUB PARAMETER DEFINITION Bit 1 of octet 2 = 0 1 IMEISV must not be included by MS IMEISV must be included by MS
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIPHER MODE COMMAND 3BK 11203 0064 DSZZA 62/2186 2
MCD
CIPHER MODE COMPLETE ABIS A SCCP Connection 08.08 3.2.1.31 This message sent from BSC to MSC indicates that a successful cipher synchronisation has been achieved across the Air Interface.
FUNCTION
DIRECTION
BSC
TYPE
MF OV OF
(1) (2)
ABNORMAL SITUATION
TIMER
Ciphering Procedure
(ref. [4])
(*) : n is the length of the layer 3 information. This message is sent to the MSC only if the ciphering mode complete was received from the MS. (1) (2) Only included if the length of the CIPHERING MODE COMPLETE message received on the Air interface is greater than 2 octets. This will only be included if the MSC indicates that more than one ciphering algorithm is permitted. This possibility would have been indicated to the BSC in the Encryption Information IE contained in the last received HANDOVER REQUEST or CIPHER MODE COMMAND messages.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIPHER MODE COMPLETE 3BK 11203 0064 DSZZA 63/2186 3
MCD
7 1 0
6 0 1
5 1 0
4 0 0
3 1 0
2 0 0
1 1 0 optional
optional
Algorithm Identifier
This is the unchanged layer 3 message as received from the air interface. PARAMETER ORIGIN - ACTION ON PARAMETER It is just a transfer from Air to A Interface of the message received from the MS. This is a phase 2 IE. It will noly be included if the MS sends layer 3 information in the CIPHERING MODE COMPLETE message, due to an MSC requirement (for example, MS shall include Mobile Identity IE). If the MSC requires such information, it should be able to handle it. LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIPHER MODE COMPLETE 3BK 11203 0064 DSZZA 64/2186 4
ED
04
Released
0064_04.DOC 31/05/02
MCD
TYPE : O DEFINITION Description of the encryption algorithm allocated to the MS. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 1 3 1 2 0 1 0 1 2
Algorithm Identifier SUB PARAMETER DEFINITION Bit 8765 4321 0000 0001 0000 0010 0000 0011 0000 0100 0000 0101 0000 0110 0000 0111 0000 1000 All other values reserved
No encryption used GSM A5/1 GSM A5/2 GSM A5/3 GSM A5/4 GSM A5/5 GSM A5/6 GSM A5/7
Not supported Not supported Not supported Not supported Not supported
PARAMETER ORIGIN - ACTION ON PARAMETER This is a phase 2 IE. It is only sent if GSM_PHASE is set to "GSM phase 2".
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIPHER MODE COMPLETE 3BK 11203 0064 DSZZA 65/2186 5
MCD
CIPHER MODE REJECT ABIS A SCCP Connection 08.08 3.2.1.48 This message sent from BSC to MSC to indicate that it is unable to perform the requested ciphering.
FUNCTION
DIRECTION
BSC
TYPE
MF MF
1 3 4
ABNORMAL SITUATION
TIMER
Ciphering Procedure
(ref. [4])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIPHER MODE REJECT 3BK 11203 0064 DSZZA 66/2186 6
MCD
8 0 0 Cause 0
7 1 0
6 0 0
5 1 0
4 1 0
3 0 1
2 0 0
1 1 0
6.9.2 CAUSE
TYPE : M DEFINITION It is used to indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0 1 2 3
Length Ext SUB PARAMETER DEFINITION Ext bit =0 Used causes :(*) Cause value
765 Class 100 : Service or option not implemented Ciphering Algorithm not supported Class 101 : Invalid message Information element or field missing Incorrect value Class 110 : Protocol error Protocol error between BSC and MSC 100 101 101 110
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIPHER MODE REJECT 3BK 11203 0064 DSZZA 67/2186 7
MCD
CIRCUIT GROUP BLOCK ABIS A SCCP Connectionless 08.08 3.2.1.41 This message is sent from BSC to MSC to indicate that a list of terrestrial resources must be blocked at the MSC and cannot therefore be used for traffic. BSC
FUNCTION
DIRECTION
TYPE
Message type Cause Circuit identity Code Circuit Identity Code List
MF MV MF MV
(1)
T20
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP BLOCK 3BK 11203 0064 DSZZA 68/2186 8
MCD
7 1 0
6 0 0
5 0 0
4 0 0
3 1 1
2 0 0
1 0 0
6.10.2 CAUSE
TYPE : M DEFINITION To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
Length 0 SUB PARAMETER DEFINITION Used causes : 765 Class 000 : Normal event - O&M intervention Class 010 : Resource unavailable - Requested terrestrial resources unavailable PARAMETER ORIGIN - ACTION ON PARAMETER Only this format is used (no extension). LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP BLOCK 3BK 11203 0064 DSZZA 69/2186 9 000 010 4321 0111 0010 Cause Value
ED
04
Released
0064_04.DOC 31/05/02
MCD
SUB PARAMETER DEFINITION PCM Multiplex TS in use defines the terrestrial channel
PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is given to the MSC in order to report decode the IE Circuit Identity Code List.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP BLOCK 3BK 11203 0064 DSZZA 70/2187 0
MCD
TYPE : M DEFINITION Defines a list of terrestrial channels by using a bitmap. The origin of the bitmap is given by the channel given in the IE Circuit Identity Code. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 1 3 1 2 1 1 0
SUB PARAMETER DEFINITION Range: Number in pure binary representing ranging from 0 to 255. Range+1 gives the range of circuits affected by the message (1 to 256). Status: Bitmap indicating the state of the CICs following the CIC given in the OIE Circuit Identity Code. For each bit: 0 : no indication 1 : block PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is given to the MSC in order to report a failure on a list of terrestrial channels.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP BLOCK 3BK 11203 0064 DSZZA 71/2187 1
MCD
CIRCUIT GROUP BLOCKING ACKNOWLEDGE ABIS A SCCP Connectionless 08.08 3.2.1.42 This message is sent from MSC to BSC to acknowledge the receipt of an earlier Circuit Group Block message and to indicate that the concerned circuits have been removed from service. BSC
FUNCTION
DIRECTION
TYPE
MF MF MV
T20
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP BLOCKING ACKNOWLEDGE 3BK 11203 0064 DSZZA 72/2187 2
MCD
7 1 0
6 0 0
5 0 0
4 0 0
3 1 0
2 0 0
1 1 1
SUB PARAMETER DEFINITION PCM Multiplex TS in use defines the terrestrial channel
PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is given to the MSC in order to report decode the IE Circuit Identity Code List.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP BLOCKING ACKNOWLEDGE 3BK 11203 0064 DSZZA 73/2187 3
MCD
TYPE : M DEFINITION Defines a list of terrestrial channels by using a bitmap. The origin of the bitmap is given by the channel given in the IE Circuit Identity Code. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 1 3 1 2 1 1 0
SUB PARAMETER DEFINITION Range: Number in pure binary representing ranging from 0 to 255. Range+1 gives the range of circuits affected by the message (1 to 256). Status: Bitmap indicating the state of the CICs following the CIC given in the OIE Circuit Identity Code. For each bit: 0 : no indication 1 : blocking acknowledgment PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is given to the MSC in order to recognise this message from a previous Circuit Group Block message.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP BLOCKING ACKNOWLEDGE 3BK 11203 0064 DSZZA 74/2187 4
MCD
CIRCUIT GROUP UNBLOCK ABIS A SCCP Connectionless 08.08 3.2.1.43 This message is sent from BSC to MSC to indicate that a list of terrestrial resources may be returned to service at the MSC and can therefore be used for traffic. BSC
FUNCTION
DIRECTION
TYPE
MF MF MV
T20
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP UNBLOCK 3BK 11203 0064 DSZZA 75/2187 5
MCD
7 1 0
6 0 0
5 0 0
4 0 0
3 1 0
2 1 0
1 0 1
SUB PARAMETER DEFINITION PCM Multiplex TS in use defines the terrestrial channel
PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is given to the MSC in order to report decode the IE Circuit Identity Code List.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP UNBLOCK 3BK 11203 0064 DSZZA 76/2187 6
MCD
TYPE : M DEFINITION Defines a list of terrestrial channels by using a bitmap. The origin of the bitmap is given by the channel given in the IE Circuit Identity Code. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 1 3 1 2 1 1 0
SUB PARAMETER DEFINITION Range: Number in pure binary representing ranging from 0 to 255. Range+1 gives the range of circuits affected by the message (1 to 256). Status: Bitmap indicating the state of the CICs following the CIC given in the OIE Circuit Identity Code. For each bit: 0 : no indication 1 : unblock PARAMETER ORIGIN - ACTION ON PARAMETER The BSC gives to the MSC the list of terrestrial channels which become available.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP UNBLOCK 3BK 11203 0064 DSZZA 77/2187 7
MCD
CIRCUIT GROUP UNBLOCKING ACKNOWLEDGE AIR ABIS A SCCP Connectionless 08.08 3.2.1.44 This message is sent from MSC to BSC to acknowledge the receipt of an earlier Circuit Group Unblock message and to indicate that the concerned circuits have returned to service. BSC
FUNCTION
DIRECTION
TYPE
MF MF MV
T20
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP UNBLOCKING ACKNOWLEDGE 3BK 11203 0064 DSZZA 78/2187 8
MCD
7 1 0
6 0 0
5 0 0
4 0 0
3 1 0
2 1 0
1 1 1
SUB PARAMETER DEFINITION PCM Multiplex TS in use defines the terrestrial channel
PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is given to the MSC in order to report decode the IE Circuit Identity Code List.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP UNBLOCKING ACKNOWLEDGE 3BK 11203 0064 DSZZA 79/2187 9
MCD
TYPE : M DEFINITION Defines a list of terrestrial channels by using a bitmap. The origin of the bitmap is given by the channel given in the IE Circuit Identity Code. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 1 3 1 2 1 1 0
SUB PARAMETER DEFINITION Range: Number in pure binary representing ranging from 0 to 255. Range+1 gives the range of circuits affected by the message (1 to 256). Status: Bitmap indicating the state of the CICs following the CIC given in the OIE Circuit Identity Code. For each bit: 0 : no indication 1 : unblocking acknowledgment PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is given to the MSC in order to recognise this message from a previous Circuit Group Unblock message.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CIRCUIT GROUP UNBLOCKING ACKNOWLEDGE 3BK 11203 0064 DSZZA 80/2188 0
MCD
CLASSMARK REQUEST ABIS A SCCP Connection 08.08 3.2.1.46 This message is sent by the MSC to the BSC to request an update of Classmark information from the Mobile Station (via the classmark enquiry procedure). BSC
FUNCTION
DIRECTION
TYPE
Message type
MF
TIMER
Classmark Handling
(ref. [7])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK REQUEST 3BK 11203 0064 DSZZA 81/2188 1
MCD
CLASSMARK UPDATE ABIS A SCCP Connection 08.08 3.2.1.29 This message is sent by the BSC/MSC to the MSC/BSC to report a change of Classmark in the Mobile Station. BSC
FUNCTION
DIRECTION
TYPE
MF MV OV
ABNORMAL SITUATION
TIMER
Classmark Handling
(ref. [7])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 82/2188 2
MCD
7 1 0
6 0 0
5 1 1
4 0 0
3 1 0
2 0 1
1 0 0
Length Revision level 0 Encryption Algorithm 0 SM. cap RF power Capability Frequency capability
Length = 3 Classmark Info 2 (Phase 2 MS) 0 Revision ES-IND spare level 0 PS SS Screen. spare Capa. Indicator CM3 0 Classmark Info 3 0 spare 0
LCSVA CAP
Length = 3 0 Revision ES_ spare level IND 0 PS SS Screen. spare Capa. Indicator A5/1 SM. cap RF power Capability 0 0 FC spare spare
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 83/2188 3
MCD
TYPE : M DEFINITION : Defines certain attributes of the Mobile Station equipment in use on a particular transaction as given by a MS supporting GSM phase 1. BIT DESCRIPTION 8 0 7 0 6 0 5 1 Length Revision level 0 Encryption Algorithm 0 SM. cap RF power Capability Frequency capability 4 0 3 0 2 1 1 0 1 2 3 4
SUB PARAMETER DEFINITION Revision level : 0 0 0 Reserved for phase 1. All other values reserved Encryption Algorithm : 00 Algorithm A5/1 All other values reserved. RF Power capability : BCCH = GSM900 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 0 1 1 class 4 1 0 0 class 5 All other values reserved BCCH = DCS1800 0 0 0 class 1 0 0 1 class 2 All other values reserved SM Capability : 0 short message capability not present 1 short message capability present FC Frequency Capability : 0 0 0 Band no 0 All other values reserved PARAMETER ORIGIN - ACTION ON PARAMETER This is the classmark information type 2 as sent by a phase 1 MS. The BSC takes this information in order to have the MS power capability for the power control and algorithm information. Note: The BSC will decode this IE as if it was a phase 2 classmark info IE. ED 04 Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 84/2188 4
MCD
TYPE : M DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 7 0 6 0 5 1 Length 0 spare 0 spare CM3 Revision ES-IND level PS SS Screen. Capa. Indicator LCS VA 0 UCS2 CAP spare A5/1 SM. cap
SoLSA
4 0
3 0
2 1
1 0 1 2
VBS
CMSP
3 FC A5/2 4 5
SUB PARAMETER DEFINITION Revision level : 00 Reserved for phase 1. 01 Used by phase 2 mobiles 10 Used by mobile stations supporting R99 or later versions of the protocol All other values reserved ES-IND : 0 1 A5/1 : 0 1 algorithm A5/1 available algorithm A5/1 not available. Controlled Early Classmark Sending option not implemented Controlled Early Classmark Sending option implemented
RF Power capability : BCCH = GSM900 and GSM850 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 0 1 1 class 4 1 0 0 class 5 All other values reserved BCCH = DCS1800 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 (handled as class 1 by the Alcatel BSS) All other values reserved BCCH = DCS1900 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 handled as class 1 All other values reserved LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 85/2188 5
ED
04
Released
0064_04.DOC 31/05/02
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
PS Capability (Pseudo-Synchronization) : 0 PS capability not present 1 PS capability present Not checked by the BSC. SS Screening Indicator : 00 01 10 11 Not checked by the BSC. SM Capability : 0 MS does not support mobile terminated point to point SMS 1 MS supports mobile terminated point to point SMS VBS Voice Broadcast Service 0 no VBS capability or no notifications wanted 1 VBS capability and notifications wanted Not checked by the BSC. VGCS Voice Group Call Service 0 no VGCS capability or no notifications wanted 1 VGCS capability and notifications wanted Not checked by the BSC. FC Frequency Capability : BCCH = GSM900 0 The MS does not support the extension band G1 in addition to the primary GSM band. 1 The MS does support the extension band G1. BCCH = DCS1800, DCS1900 and GSM850 0 Reserved for future use Note: only FC is checked in this release and only in GSM900 configuration. CM3 Classmark 3 : 0 No additional MS capability 1 Additional MS capabilities are described in the classmark 3 information element. LCS VA CAPability (LCS value added location request notification capability). Required for MS supporting GSM. 0 LCS value added location request notification capability not supported 1 LCS value added location request notification capability supported Not checked by the BSC. UCS2 treatment: Required for MS suppporting UMTS. 0 the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2. 1 the ME has no preference between the use of the default alphabet and the use of UCS2. Not checked by the BSC. SoLSA: Required for MS suppporting GSM. 0 The ME does not support SoLSA. 1 The ME supports SoLSA. ED 04 Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 86/2188 6
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
CMSP: CM Service Prompt 0 "Network initiated MO CM connection request" not supported. 1 "Network initiated MO CM connection request" supported for at least one CM protocol. Not checked by the BSC. A5/3 : 0 A5/3 ciphering algorithm not available 1 A5/3 ciphering algorithm available Not checked by the BSC. A5/2 : 0 1 A5/2 ciphering algorithm not available A5/2 ciphering algorithm available
PARAMETER ORIGIN - ACTION ON PARAMETER The BSC takes this information in order to have the MS power capability for the power control and algorithm information, the MS frequency capability and the MS ciphering capability. Default values are used for 'revision level', 'RF Power Capability' and MS cipher capability if the BSC can not decode these fields (see reference [7]). Additional mobile info can be obtained by invoking the classmark enquiry procedure. Octet 5 is a phase 2 element. The BSC will only send it if STRIP_O5_CM2 is set to "false". Note: The BSC will decode this IE as if it was a phase 2 classmark info IE.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 87/2188 7
MCD
TYPE : O DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 0 2 1 1 1 1 2
Length
3 - 14
<Classmark 3 Value part> ::= < spare bit > { < Multiband supported : { 000 } > < A5 bits > | < Multiband supported : { 101 | 110 } > < A5 bits > < Associated Radio Capability 2 : bit(4) > < Associated Radio Capability 1 : bit(4) > | < Multiband supported : { 001 | 010 | 100 } > < A5 bits > < spare bit >(4) < Associated Radio Capability 1 : bit(4) > } { 0 | 1 < R Support > } { 0 | 1 < Multi Slot Capability > } < UCS2 treatment: bit > < Extended Measurement Capability : bit > { 0 | 1 < MS measurement capability > } { 0 | 1 < MS Positioning Method Capability > } { 0 | 1 < EDGE Multi Slot Capability > } { 0 | 1 < EDGE Struct > } { 0 | 1 < GSM 400 Bands Supported : { 01 | 10 | 11 } > < GSM 400 Associated Radio Capability: bit(4) > } { 0 | 1 <GSM 850 Associated Radio Capability : bit(4) > } { 0 | 1 <PCS 1900 Associated Radio Capability : bit(4) > } < UMTS FDD Radio Access Technology Capability : bit > < UMTS TDD Radio Access Technology Capability : bit > < CDMA 2000 Radio Access Technology Capability : bit > { 0 | 1 < DTM GPRS Multi Slot Sub-Class : bit(2) > < MAC Mode Support : bit > { 0 | 1< DTM EGPRS Multi Slot Sub-Class : bit(2) > } } { 0 | 1 < Single Band Support > } < spare bit > ; < A5 bits > ::= < A5/7 : bit > < A5/6 : bit > < A5/5 : bit > < A5/4 : bit > ;
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 88/2188 8
MCD
<R Support>::= < R-GSM band Associated Radio Capability : bit(3) > ;
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
< Multi Slot Capability > ::= < Multi Slot Class : bit(5) > ; < MS Measurement capability > ::= < SMS_VALUE : bit (4) > < SM_VALUE : bit (4) > ; < MS Positioning Method Capability > ::= < MS Positioning Method : bit(5) > ; < EDGE Multi Slot Capability > ::= < EDGE Multi Slot Class : bit(5) > ; <EDGE Struct> : := < Modulation Capability : bit > { 0 | 1 < EDGE RF Power Capability 1: bit(2) > } { 0 | 1 < EDGE RF Power Capability 2: bit(2) > }
SUB PARAMETER DEFINITION Multiband Supported (3 bit field) Band 1 supported (third bit of the field) Bit 3 0 P-GSM not supported 1 P-GSM supported Band 2 supported (second bit of the field) Bit 2 0 E-GSM or R-GSM not supported 1 E-GSM or R-GSM supported Band 3 supported (first bit of the field) Bit 1 0 DCS 1800 not supported 1 DCS 1800 supported Note: The indication of support of P-GSM band or E-GSM or R-GSM band is mutually exclusive. For single band mobile station all bits are set to 0.
A5/4 (1 bit field) 0 1 Encryption algorithm A5/4 not available Encryption algorithm A5/4 available
Not checked by the BSC. A5/5 (1 bit field) 0 1 Encryption algorithm A5/5 not available Encryption algorithm A5/5 available
Not checked by the BSC. A5/6 (1 bit field) 0 1 Encryption algorithm A5/6 not available Encryption algorithm A5/6 available
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 89/2188 9
MCD
Not checked by the BSC. Associated radio capability 1 (4 bit field): If either of P-GSM or E-GSM or R-GSM is supported, this 1 field indicates the radio capability for P-GSM, E-GSM or R-GSM, and the radio capability 2 field indicates the radio capability for DCS1800 if supported, and is spare otherwise. If none of P-GSM or E-GSM or R-GSM are supported, this field indicates the radio capability for DCS1800. GSM900 0010 0011 0100 0101 0 0 0 1 class 1 class 2 class 3 class 4 class 5 All other values reserved
DCS1800 0 0 0 1 class 1 0 0 1 0 class 2 0 0 1 1 class 3 handled as class 1 All other values reserved Not checked by the DCS1900 BSC. DCS1800 0 0 0 1 class 1 0 0 1 0 class 2 0 0 1 1 class 3 handled as class 1 All other values reserved Not checked by the DCS1900 BSC and GSM850 / DCS1900 BSC Associated radio capability 2 (4 bit field): If either of P-GSM or E-GSM or R-GSM is supported, this field indicates the radio capability for DCS1800 if supported, and is spare otherwise DCS1800 0 0 0 1 class 1 0 0 1 0 class 2 0 0 1 1 class 3 handled as class 1 All other values reserved Not checked in the DCS1900 BSS and GSM850 / DCS1900 BSS. R Support (1 bit field)pres: 0 R-GSM band is not supported 1 R-GSM band is supported. Not checked by the DCS1900 BSC GSM850 / DCS1800 BSS and GSM850 / DCS1900 BSS. R-GSM band Associated Radio Capability (3 bits field) : 001 Class 1 : 20 W 010 Class 2 : 8 W 011 Class 3 : 5 W 100 Class 4 : 2 W 101 Class 5 : 0.8 W LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 90/2189 0
ED
04
Released
0064_04.DOC 31/05/02
MCD
Not checked by the DCS1900 BSC, GSM850 / DCS1800 BSS and GSM850 / DCS1900 BSS.
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
R-GSM band Associated Radio Capability (3 bits field) : 001 Class 1 : 20 W 010 Class 2 : 8W 011 Class 3 : 5W 100 Class 4 : 2W 101 Class 5 : 0.8 W Not checked by the DCS1900 BSC, GSM850 / DCS1800 BSS and GSM850 / DCS1900 BSS. Multi Slot Class (5 bit field) In case the MS supports the use of multiple timeslots then the Multi Slot Class field is coded as the binary representation of the multislot class defined in 3GPP TS GSM 05.02. Not checked by the BSC. UCS2 treatment (1 bit field): 0 the ME has a preference for the default alphabet over UCS2 1 the ME has no preference between the use of the default alphabet and the use of UCS2 Not checked by the BSC. Extended Measurement Capability (1 bit field): 0 the MS does not support Extended Measurements 1 the MS supports Extended Measurements Not checked by the BSC. SMS_VALUE (Switch-Measure-Switch) (4 bit field): The SMS field indicates the time needed for the mobile station to switch from one radio channel to another, perform a neighbour cell power measurement, and the switch from that radio channel to another radio channel. 0000 0001 0010 ... 1111 1/4 timeslot (~144 microseconds) 2/4 timeslot (~288 microseconds) 3/4 timeslot (~433 microseconds) 16/4 timeslot (~2307 microseconds)
Not checked by the BSC. SM_VALUE (Switch-Measure) (4 bit field): The SM field indicates the time needed for the mobile station to switch from one radio channel to another and perform a neighbour cell power measurement. 0000 0001 0010 ... 1111 1/4 timeslot (~144 microseconds) 2/4 timeslot (~288 microseconds) 3/4 timeslot (~433 microseconds) 16/4 timeslot (~2307 microseconds)
Not checked by the BSC. MS Positioning Method Capability (1 bit field): This bit indicates whether the MS supports Positioning Method or not for the provision of Location Services. Not checked by the BSC. ED 04 Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 91/2189 1
MCD
MS Positioning Method (5 bit field): This field indicates the Positioning Method(s) supported by the mobile station. MS assisted E-OTD Bit 5 0 MS assisted E-OTD not supported 1 MS assisted E-OTD supported Not checked by the BSC. MS based E-OTD Bit 4 0 MS based E-OTD not supported 1 MS based E-OTD supported Not checked by the BSC. MS assisted GPS Bit 3 0 MS assisted GPS not supported 1 MS assisted GPS supported Not checked by the BSC. MS assisted GPS Bit 2 0 MS based GPS not supported 1 MS based GPS supported Not checked by the BSC. MS conventional GPS Bit 1 0 conventional GPS not supported 1 conventional GPS supported Not checked by the BSC. EDGE Multi Slot class (5 bit field): In case the EDGE MS supports the use of multiple timeslots and the number of supported time slots is different from number of time slots supported for GMSK then the EDGE Multi Slot class field is included and is coded as the binary representation of the multislot class defined in 3GPP TS GSM 05.02. Not checked by the BSC. Modulation Capability (1 bit field): Modulation Capability field indicates the supported modulation scheme by MS in addition to GMSK 0 8-PSK supported for downlink reception only 1 8-PSK supported for uplink transmission and downlink reception Not checked by the BSC. EDGE RF Power Capability 1 (2 bit field) If 8-PSK is supported for both uplink and downlink, the EDGE RF Power Capability 1 field indicates the radio capability for GSM900 and GSM850. Not checked by the BSC. EDGE RF Power Capability 2 (2 bit field) If 8-PSK is supported for both uplink and downlink, the EDGE RF Power Capability 2 field indicates the radio capability for DCS1800 or DCS1900 if supported, and is not included otherwise. Not checked by the BSC.
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 92/2189 2
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
GSM 400 Bands Supported (2 bit field) 01 GSM 480 supported, GSM 450 not supported 10 GSM 450 supported, GSM 480 not supported 11 GSM 450 supported, GSM 480 supported Not checked by the BSC. GSM 400 Associated Radio Capability (4 bit field) If either GSM 450 or GSM 480 or both is supported, the GSM 400 Associated Radio Capability field indicates the radio capability for GSM 450 and/or GSM 480. Not checked by the BSC. GSM 850 Associated Radio Capability (4 bit field) This field indicates whether GSM 850 band is supported and its associated radio capability. 001 Class 1 : 20 W 010 Class 2 : 8W 011 Class 3 : 5W 100 Class 4 : 2W 101 Class 5 : 0.8 W
PCS 1900 Associated Radio Capability (4 bit field) This field indicates whether DCS 1900 band is supported and its associated radio capability. 001 Class 1 : 1W 010 Class 2 : 0.25 W 011 Class 3 : 2W
UMTS FDD Radio Access Technology Capability (1 bit field) 0 UMTS FDD not supported 1 UMTS FDD supported Not checked by the BSC. UMTS TDD Radio Access Technology Capability (1 bit field) 0 UMTS TDD not supported 1 UMTS TDD supported Not checked by the BSC. CDMA 2000 Radio Access Technology Capability (1 bit field) 0 CDMA2000 not supported 1 CDMA2000 supported Not checked by the BSC. DTM GPRS Multi Slot Sub-Class (2 bit field) 00 Sub-Class 1 supported 01 Sub-Class 5 supported 10 Sub-Class 9 supported 11 Reserved for future extension. If received, the network shall interpret this as 00 Not checked by the BSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 93/2189 3
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
DTM EGPRS Multi Slot Sub-Class (2 bit field) This field indicates the EGPRS DTM capabilities of the MS. The DTM EGPRS Multi Slot Sub-Class is independent from the Multi Slot Capabilities field. This field shall be included only if the mobile station supports EGPRS DTM. This field is coded as the DTM GPRS Multi Slot Sub-Class field. Not checked by the BSC. MAC Mode Support (1 bit field) This field indicates whether the MS supports Dynamic and Fixed Allocation or only supports Exclusive Allocation. 0 Dynamic and Fixed Allocation not supported 1 Dynamic and Fixed allocation supported Not checked by the BSC. Single Band Support (4 bit field) This field is sent in case of UMTS to GSM handover if the MS supports UMTS and one and only one GSM band with the exception of R-GSM. It indicates the GSM band supported by the MS. 0000 0001 0010 0011 0100 0101 0110 E-GSM is supported P-GSM is supported DCS1800 is supported GSM450 is supported GSM480 is supported GSM850 is supported DCS1900 is supported
Not checked by the BSC. PARAMETER ORIGIN - ACTION ON PARAMETER This is a phase 2 IE. It is only sent if STRIP_05_CM2 is set to "false" and EN_SEND_CM3 is set to "true".
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLASSMARK UPDATE 3BK 11203 0064 DSZZA 94/2189 4
MCD
CLEAR COMMAND ABIS A SCCP Connection 08.08 3.2.1.21 This message is sent from MSC to BSC to instruct the BSS to release the associated dedicated resource.
FUNCTION
DIRECTION
BSC
TYPE
MF OF MF
1 4 3 8
ABNORMAL SITUATION -
TIMER -
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLEAR COMMAND 3BK 11203 0064 DSZZA 95/2189 5
MCD
7 0 0
6 1 0
5 0 0
4 0 0
3 0 1
2 0 1
1 0 1 optional
SUB PARAMETER DEFINITION Refer to the general part at the beginning of this dictionary. PARAMETER ORIGIN - ACTION ON PARAMETER Contents of this information element will be ignored by the receiver (BSC).
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLEAR COMMAND 3BK 11203 0064 DSZZA 96/2189 6
MCD
6.16.3 CAUSE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : M DEFINITION To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
SUB PARAMETER DEFINITION Only this format is used (no extension). Used Cause values : 765 Class 000 : Normal event Call control Radio interface failure, reversion to old channel Handover successful Class 110 : Protocol error Protocol error between BSC and MSC 000 000 000 110 4321 1001 1010 1011 0000
PARAMETER ORIGIN - ACTION ON PARAMETER If other cause values are received, the BSC should react in a normal way. i.e. If the cause value is incorrect or missing, clearing is still performed. The MSC gives to the BSC some indication on the event (normal or not) which is the cause of the release. This may be sent to the MS in the "Channel Release" message (RR Cause field).
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLEAR COMMAND 3BK 11203 0064 DSZZA 97/2189 7
MCD
CLEAR COMPLETE ABIS A SCCP Connection 08.08 3.2.1.22 This message is sent from the BSC to the MSC to inform the MSC that the associated dedicated resource has been successfully cleared
FUNCTION
DIRECTION
BSC
TYPE
Message type
MF
ABNORMAL SITUATION
TIMER T9101
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLEAR COMPLETE 3BK 11203 0064 DSZZA 98/2189 8
MCD
CLEAR REQUEST ABIS A SCCP Connection 08.08 3.2.1.20 This message is sent from the BSC to the MSC to indicate to the MSC that the BSS wishes to release the associated connection
FUNCTION
DIRECTION
BSC
TYPE
MF MF
1 3
ABNORMAL SITUATION
TIMER T9104
The timer T9104 is started, awaited CLEAR COMMAND and CLEAR REQUEST may be repeated a maximum of 8 times.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLEAR REQUEST 3BK 11203 0064 DSZZA 99/2189 9
MCD
8 0 0 Cause 0
7 0 0
6 1 0
5 0 0
4 0 0
3 0 1
2 1 0
1 0 0
6.18.2 CAUSE
TYPE : M DEFINITION To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
Length 0 SUB PARAMETER DEFINITION Only this format is used (no extension). Used Cause values : 765 Class 000 : Normal event Radio Interface message failure Radio Interface failure O&M intervention Class 010 : Resource unavailable Equipment failure No Radio resource available Pre-emption 000 000 000 010 010 010 4321 0000 0001 0111 0000 0001 1001 Cause value
All causes which are not allowed or not unknown should be accepted by the MSC. PARAMETER ORIGIN - ACTION ON PARAMETER None.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE CLEAR REQUEST 3BK 11203 0064 DSZZA 100/218 100
MCD
COMPLETE LAYER 3 INFORMATION ABIS A SCCP Connection 08.08 3.2.1.32 The message is sent from BSC to MSC when a location updating, CM Service Request, CM Re-establishment Request, IMSI Detach, or Paging Response message is received from the Mobile Station. BSC
FUNCTION
DIRECTION
TYPE
Message type Cell Identifier Layer 3 Information Chosen channel LSA Identifier List APDU
MF MV MV OF OV OV
1 7-10 3-n (*) 2 3+3n (**) 3-n (***) 11 - 13+n (*) TIMER
ABNORMAL SITUATION
SCCP Release
T9105
(ref. [2])
(*) n is the length of Layer 3 Information. (**) n is the number of LSA Identification. (***)n is the length of APDU.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE COMPLETE LAYER 3 INFORMATION 3BK 11203 0064 DSZZA 101/218 101
MCD
0 LAC
Note
3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE COMPLETE LAYER 3 INFORMATION 3BK 11203 0064 DSZZA 102/218 102
MCD
Length spare Cell Identif. Discriminator Cell Identification SUB PARAMETER DEFINITION Cell identification discriminator 0000 The whole cell global Identification, CGI 0001 Location Area Code, LAC, and Cell Identity, CI 0010 Cell Identity, CI 0011 No cell is associated with the transaction 1000 PLMN-ID, LAC and RNC-ID 1001 RNC-ID 1010 LAC and RNC-ID 1011 SAI (Serving Area Identity) of UE All other values are reserved. Only the discriminator value 0 and 1 are used : Discriminator 0 : 4 5 6 7 8 9 10 MCC digit 2 MNC digit 3 (Note) MNC digit 2 MCC digit 1 MCC digit 3 4 5 6 7
used used not used not used not used not used not used not used
Note
3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
MCC, MNC : See 3GPP TS 24.008 LAC, Location area code : See 3GPP TS 24.008 LAYER 3 MESSAGE DICTIONARY - A INTERFACE COMPLETE LAYER 3 INFORMATION 3BK 11203 0064 DSZZA 103/218 103
ED
04
Released
0064_04.DOC 31/05/02
MCD
PARAMETER ORIGIN - ACTION ON PARAMETER The MSC requires the information from a specific cell controlled by the BSC. This info element is included even in case of mono-cell configuration. The choice between the use of cell discriminator 0 or 1 depends on the value of a BSS parameter.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE COMPLETE LAYER 3 INFORMATION 3BK 11203 0064 DSZZA 104/218 104
MCD
TYPE : M DEFINITION It is used to pass Layer 3 messages from the Air interface to the MSC unchanged or from the MSC to the MS. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 1 2 1 1 1 1 2 3 : N SUB PARAMETER DEFINITION It is the same message as received on the radio interface for the following messages : CM-service Request IMSI detach Indication Location Updating Request Paging response CM Establishment PARAMETER ORIGIN - ACTION ON PARAMETER It is just a transfer from Air to A Interface of the message received from the MS in the SABM frame (from the user data of the "Establish Indication" message).
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE COMPLETE LAYER 3 INFORMATION 3BK 11203 0064 DSZZA 105/218 105
MCD
HANDOVER COMMAND ABIS A SCCP Connection 08.08 3.2.1.11 This message is sent from MSC to serving BSC and contains the target channel to which the MS should move to.
FUNCTION
DIRECTION
BSC
TYPE
MF MV OV
not used
ABNORMAL SITUATION
TIMER
(ref. [21])
(*) n is the length of the layer 3 information (04.08 HANDOVER COMMAND). n 9, see ref [20].
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER COMMAND (A interface) 3BK 11203 0064 DSZZA 106/218 106
MCD
8 0 0 Layer 3 Information :
7 0 0
6 0 0
5 1 1
4 0 0
3 0 1
2 1 1
1 1 1
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER COMMAND (A interface) 3BK 11203 0064 DSZZA 107/218 107
MCD
HANDOVER COMPLETE A Interface ABIS A SCCP Connection 08.08 3.2.1.12 This message sent by target BSC to MSC indicates that the MS has successfully accessed the target cell.
FUNCTION
DIRECTION
BSC
TYPE
MF OF
(1)
1 2
ABNORMAL SITUATION
TIMER
(ref. [21])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER COMPLETE (A interface) 3BK 11203 0064 DSZZA 108/218 108
MCD
8 0 0 RR CAUSE
7 0 0
6 0 0
5 1 1
4 0 0
3 1 1
2 0 0
1 0 1 optional
RR Cause
6.21.2 RR CAUSE
TYPE : O DEFINITION This element is passed from the air interface to the MSC transparently, when received from the MS. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 1 2 0 1 1
RR Cause SUB PARAMETER DEFINITION RR Cause : the same value received (and same meaning) as the Handover Complete on the Air Interface. PARAMETER ORIGIN - ACTION ON PARAMETER The RR Cause information, received from MS (in the "Handover complete" message) is given to the MSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER COMPLETE (A interface) 3BK 11203 0064 DSZZA 109/218 109
MCD
HANDOVER DETECT ABIS A SCCP Connection 08.08 3.2.1.40 This message is sent by the target BSS to the MSC to report the reception of the HANDOVER ACCESS from the Mobile Station. BSC
FUNCTION
DIRECTION
TYPE
Message type
MF
ABNORMAL SITUATION
TIMER
(ref. [21])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER DETECT (A interface) 3BK 11203 0064 DSZZA 110/218 110
MCD
HANDOVER FAILURE ABIS A SCCP Connection 08.08 3.2.1.16 This message may be sent by the target BSC to report failure during handover or by the serving BSC to indicate reversion to the old channel BSC
FUNCTION DIRECTION
TYPE
MF MF OF OF OV
1 3 2 2 n+2 (**) 6
ABNORMAL SITUATION
TIMER
T9110 (*)
(ref. [21])
(*) Only applicable in target cell. Timer is started when the message is sent to MSC. (**) n is the number of circuit pools
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER FAILURE (A interface) 3BK 11203 0064 DSZZA 111/218 111
MCD
8 0 0 Cause 0 RR Cause 0
7 0 0
6 0 0
5 1 0
4 0 0
3 1 1
2 1 0
1 0 0
RR Cause
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER FAILURE (A interface) 3BK 11203 0064 DSZZA 112/218 112
MCD
6.23.2 CAUSE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : M DEFINITION : To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
Length 0 SUB PARAMETER DEFINITION : Used cause values : 765 Class 000 : Normal event Radio Interface failure (target cell) O&M intervention Radio interface failure, reversion to old channel (serving cell) Class 010 : Resource unavailable Equipment failure No Radio resource available (target cell) Requested terrestrial resources unavailable (target cell) BSS not equipped Invalid cell Class 011 : Service or option not available Requested transcoding/rate adaption unavailable Circuit pool mismatch Requested speech version unavailable Class 100 : Service or option not implemented Ciphering Algorithm not supported Class 101 : Invalid message Terrestrial resource already allocated Information element or field missing Incorrect value Class 110 : Protocol error Protocol error between BSC and MSC 000 000 000 010 010 010 010 010 011 011 011 100 101 101 101 110 4321 0001 0111 1010 0000 0001 0010 0101 0111 0000 0001 0011 0000 0000 0010 0011 0000 Cause value
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER FAILURE (A interface) 3BK 11203 0064 DSZZA 113/218 113
MCD
6.23.3 RR CAUSE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : O DEFINITION : This element is passed from the air interface to the MSC transparently, when received from the MS. 8 0 7 0 6 0 5 1 4 0 3 1 2 0 1 1
RR Cause SUB PARAMETER DEFINITION : RR Cause : same value (and same meaning) as in 3GPP TS 04.18. PARAMETER ORIGIN - ACTION ON PARAMETER The RR Cause information, received from MS (in the "handover failure" message), has been stored, and is given to the MSC. This element is optional because the BSC may send the "handover failure" message without having received the same message from the MS.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER FAILURE (A interface) 3BK 11203 0064 DSZZA 114/218 114
MCD
HANDOVER PERFORMED ABIS A SCCP Connection 08.08 3.2.1.25 This message is sent from the BSC to the MSC in order to indicate that BSC has performed an Internal Handover (intracell or intercell) BSC
FUNCTION
DIRECTION
TYPE
Message type Cause Cell Identifier Chosen channel Chosen encryption algorithm Speech version (chosen) LSA Identifier
MF MF MV OF OF OF OF
1 3 7-10 2 2 2 7 17-20
NORMAL SITUATION FOLLOWING EVENT SPECIF DOC. REF. Internal Channel Change
ABNORMAL SITUATION
TIMER
(ref. [22])
(1)
(2)
(3)
This IE is never sent after the immediate assignment procedure and before either TCH assignment or external handover. After TCH assignment or external handover, the chosen channel IE is only sent when the channel type in either the last received ASSIGMENT REQUEST or HANDOVER REQUEST indicates one of the following codings : For signalling connections (i.e. SDCCH)- when the channel type indicates 'No preferences' For Speech or Data connections (i.e. TCH) - when the channel type indicates "Full or Half rate", with a preference, with or without changes allowed. This will only be included if the MSC indicates that more than one ciphering algorithm is permitted. This possibility would have been indicated to the BSC in the Encryption Information IE contained in the last received HANDOVER REQUEST or CIPHER MODE COMMAND messages. Included at least when the speech version has been changed by the BSS. LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER PERFORMED 3BK 11203 0064 DSZZA 115/218 115
ED
04
Released
0064_04.DOC 31/05/02
MCD
7 0 0
6 0 0
5 1 0
4 0 0
3 1 1
2 1 0
1 1 0
LAC cont. CI value CI value cont. Chosen Channel Chosen Encryp. Algo. Speech version 0 0 0 1 0 0 0 0 1 optional
Channel mode 0 1 0 1
Channel 1 0 0 optional
Note
3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER PERFORMED 3BK 11203 0064 DSZZA 116/218 116
MCD
7 0 0
6 0 0
5 1 0
4 0 0
3 1 1
2 1 0
1 1 0
Note
3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER PERFORMED 3BK 11203 0064 DSZZA 117/218 117
MCD
6.24.3 CAUSE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : M DEFINITION : To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
Length 0 SUB PARAMETER DEFINITION : Used cause values : 765 Class 000 : Normal event Uplink Quality Uplink Strength Downlink Quality Downlink Strength Distance Better Cell Directed retry Traffic handover 000 000 000 000 000 000 000 000 4321 0010 0011 0100 0101 0110 1100 1101 1111 Cause value
PARAMETER ORIGIN - ACTION ON PARAMETER The mapping of handover alarm values detected by the Alcatel BSS handover algorithm to the GSM cause values is described in ref. [22].
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER PERFORMED 3BK 11203 0064 DSZZA 118/218 118
MCD
Length spare Cell Identif. Discriminator Cell Identification SUB PARAMETER DEFINITION : Cell identification discriminator 0000 0001 0010 0011 1000 1001 1010 1011 The whole cell global Identification, CGI Location Area Code, LAC, and Cell Identity, CI Cell Identity, CI (not used) No cell is associated with the transaction (not used) PLMN-ID, LAC and RNC-ID (not used) RNC-ID (not used) LAC and RNC-ID (not used) SAI (Serving Area Identity) of UE (not used)
All other values are reserved. Only the discriminator value 0 and 1 are used : Discriminator 0 : 4 5 6 7 8 9 10 MCC digit 2 MNC digit 3 (Note) MNC digit 2 MCC digit 1 MCC digit 3 Discriminator 1 :
4 5 6 7
Note
3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
MCC, MNC : See 3GPP TS 24.008 LAC, Location area code : See 3GPP TS 24.008 ED 04 Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER PERFORMED 3BK 11203 0064 DSZZA 119/218 119
MCD
PARAMETER ORIGIN - ACTION ON PARAMETER The MSC requires the information from a specific cell controlled by the BSC. This info element is included even in case of mono-cell configuration. The choice between the use of cell discriminator 0 or 1 depends on the value of a BSS parameter.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER PERFORMED 3BK 11203 0064 DSZZA 120/218 120
MCD
TYPE : O DEFINITION Description of the channel allocated to the MS. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 0 3 0 2 0 1 1 1 2
Channel mode
Channel
SUB PARAMETER DEFINITION Channel mode Bit 8765 0000 No channel mode indication 0001 data, 29.0 kbit/s radio interface rate (not implemented) 0010 data, 32.0 kbit/s radio interface rate (not implemented) 0011 data, 43.5 kbit/s radio interface rate (not implemented) 0100 data, 43.5 kbit/s downlink and 14.5 kbit/s uplink (not implemented) 0101 data, 29.0 kbit/s downlink and 14.5 kbit/s uplink (not implemented) 0110 data, 43.5 kbit/s downlink and 29.0 kbit/s uplink (not implemented) 0111 data, 14.5 kbit/s downlink and 43.5 kbit/s uplink (not implemented) 1000 Signalling only 1001 Speech (FR or HR) 1010 data, 14.5 kbit/s downlink and 29.0 kbit/s uplink (not implemented) 1011 Data 12.0 kbit/s (radio interface rate) 1100 Data 6.0 kbit/s (radio interface rate) 1101 Data 3.6 kbit/s (radio interface rate) 1110 Data 14.5 kbit/s (radio interface rate) (not implemented) 1111 data, 29.0 kbit/s downlink and 43.5 kbit/s uplink (not implemented) All other values reserved Channel Bit 4321 0000 None (not used) 0001 SDCCH 0100 8 Full rate TCHs (not used) 1000 1 Full rate TCH 1001 1 Half rate TCH 1010 2 Full rate TCHs (not used) 1011 3 Full rate TCHs (not used) 1100 4 Full rate TCHs (not used) 1101 5 Full rate TCHs (not used) 1110 6 Full rate TCHs (not used) 1111 7 Full rate TCHs (not used) All other values reserved PARAMETER ORIGIN - ACTION ON PARAMETER This is a phase 2 IE. It is only sent if GSM_PHASE is set to "GSM phase 2".
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER PERFORMED 3BK 11203 0064 DSZZA 121/218 121
MCD
TYPE : O DEFINITION Description of the encryption algorithm allocated to the MS. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 1 3 1 2 0 1 0 1 2
Algorithm Identifier SUB PARAMETER DEFINITION 8765 4321 0000 0001 0000 0010 0000 0011 0000 0100 0000 0101 0000 0110 0000 0111 0000 1000 All other values reserved Bit
No encryption used GSM A5/1 GSM A5/2 GSM A5/3 GSM A5/4 GSM A5/5 GSM A5/6 GSM A5/7
not supported not supported not supported not supported not supported
PARAMETER ORIGIN - ACTION ON PARAMETER This is a phase 2 IE. It is only sent if GSM_PHASE is set to "GSM phase 2".
SUB PARAMETER DEFINITION Speech version identifier is coded in the same way as the permitted speech version identifier in the Channel type information element. PARAMETER ORIGIN - ACTION ON PARAMETER This is a phase 2 IE. It is only sent if the speech version has been chosen by the BSC. LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER PERFORMED 3BK 11203 0064 DSZZA 122/218 122
ED
04
Released
0064_04.DOC 31/05/02
MCD
HANDOVER REQUEST ABIS A SCCP Connection 08.08 3.2.1.8 This message is sent from the MSC to the target BSS to indicate that the Mobile Station is to be handed over to that BSS BSC
FUNCTION
DIRECTION
TYPE
Message type Channel Type Encryption Information Classmark Info 1 or 2 Cell identifier (serving) Priority Circuit identity code Downlink DTX flag Cell identifier (target) Interference band to be used Cause Classmark info 3 Current channel type 1 Speech version (used) Group call reference Talker flag Configuration Evolution Indication Chosen encryption algorithm (serving) Old BSS to New BSS Information LSA Information LSA Access Control Suppression Service Handover IMSI Source RNC to target RNC transparent information (UMTS) Source RNC to target RNC transparent information (cdma2000)
MF MF MF MF MV OF OF OF MV OF OF OV OF OF OF OF OF OF OV OV OF OF OV OV OV
not used not used not used not used (2) not used not used not used not used not used not used
1 5-10 3-11 2 or 4/5 5-10 3 3 2 5-10 2 3-4 3-14 2 2 3-8 1 2 2 2-n 3+4n (*) 2 3 3-10 n-m (**) n-m (**)
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 123/218 123
MCD
45-87
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
ABNORMAL SITUATION If no queuing :--> no failure if queuing and timer expires --> clear request (ref. [21])
TIMER
In a monocell BSS this message is accepted If this IE is missing Only the Extra information and MultiRate configuration information Field Elements are used by the BSC. n is the number of LSA identification the length of this information element depends on the length of RNC specific information, see TS 25.413 for detail.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 124/218 124
MCD
8 0 0
7 0 0
6 0 0
5 1 0
4 0 1
3 0 0
2 0 1
1 0 1
Length Channel Type spare Speech or data indicator Channel Rate and type option
Speech
Data
7 6 5 4 3 2 1 Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier 0 0 0 0
8 Ext Ext
7
T/NT
6 spare
4 Rate
Length (1 <= value <= 9) Encryption Information : Key (continued) Classmark Inf. Type 1 OR Classmark Information Type 2 (Phase 1 MS) 0 Revision level 0 0 0 0 0 1 ESIND 1 1 A5/1 1 0 RF power capab. 0 1 0 1 Permitted Algorithms Key :
Revision level
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 125/218 125
MCD
OR 0
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Length=3 Revision ESA5/1 RF power level IND Capability PS SS Screen. SM. VBS VGC FC Capa Indicator cap S 0 LCSVA UCS2 SoLSA CMSP A5/3 A5/2 spare CAP 0 0 0 0 1 0 1
0 0
0 0
0 1 0
0 0
0 optional
optional
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 126/218 126
MCD
0 0 0
0 0 0
0 0 0
1 0 0
1 0 0
0 0 1
0 0 0
0 Cause 0 0
0 optional
Classmark Info 3 Current Channel Speech version Old BSS to New BSS Information 0 Sp 0 0 0 0
optional optional
Channel mode 1 0 0 0
Channel 0 0 0 optional
Length 0 0 0 0 0 0 0 1 opt.
Extra information
Length LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 127/218 127
MCD
0064_04.DOC 31/05/02
information
MR version
NSCB
ICMI
spare
Start mode
optional
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 128/218 128
MCD
8 0 0
7 0 0
6 0 0
5 1 0
4 0 1
3 0 0
2 0 1
1 0 1
Length Channel Type spare Speech or data indicator Channel Rate and type option
Speech
Data
7 6 5 4 3 2 1 Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier 0 0 0 0
8 Ext
7
T/NT
4 Rate
Length (1 <= value <= 9) Encryption Information : Key (continued) Classmark Inf. Type 1 OR Classmark Information Type 2 (Phase 1 MS) 0 Revision level 0 0 0 0 0 1 ESIND 1 1 A5/1 1 0 RF power capab. 0 1 0 1 Permitted Algorithms Key :
Revision level
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 129/218 129
MCD
OR 0
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Length=3 Revision ES_ level IND PS SS Screen. Capa Indicator 0 0 0 A5/1 SM. cap 0 RF power Capability 0 0 FC spare spare 1 0 1
Length (value = 8 or 5 or 3)
option
0 0
0 0
0 1 0
0 0
0 optional
optional
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 130/218 130
MCD
0 0 0
0 0 0
0 0 0
1 0 0
1 0 0
0 0 1
0 0 0
optional
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 131/218 131
MCD
TYPE : M DEFINITION This element contains all of the information that the BSC requires to determine the radio resource that is required. BIT DESCRIPTION 1 2 3 4 spare 0 0 0 0 1 0 1 1
Speech
Data
7 6 5 4 3 2 1 Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier Permitted speech version identifier
8 Ext Ext
7
T/NT
6 spare
4 Rate
SUB PARAMETER DEFINITION Speech or data indicator (octet 3) : 0001 Speech 0010 Data 0011 Signalling All other values are reserved. For values 0001 (Speech) and 0010 (Data), a dedicated terrestrial resource is also required.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 132/218 132
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Channel rate and type (octet 4) : If octet 3 indicates signalling then octet 4 shall be coded as : 0000 0000 SDCCH or Full rate TCH channel Bm or Half rate TCH channel Lm 0000 0001 SDCCH 0000 0010 SDCCH or Full rate TCH channel Bm 0000 0011 SDCCH or Half rate TCH channel Lm 0000 1000 Full rate TCH channel Bm (not used) 0000 1001 Half rate TCH channel Lm (not used) 0000 1010 Full or Half rate TCH, FR preferred, changes allowed (not used) 0000 1011 Full or Half rate TCH, HR preferred, changes allowed (not used) 0001 1010 Full or Half rate TCH, FR preferred, changes not allowed (not used) 0001 1011 Full or Half rate TCH, HR preferred, changes not allowed (not used) All other values are reserved. If octet 3 indicates speech then octet 4 shall be coded as: 0000 1000 Full rate TCH channel Bm. Preference between permitted speech versions or full rate TCH as indicated in octet 5, 5a ... 0000 1001 Half rate TCH channel Lm. Preference between permitted speech versions or half rate TCH as indicated in octet 5, 5a ... 0000 1010 Full or Half rate TCH channel, Full rate preferred, changes allowed... Preference between permitted speech versions for the respective channel rates as indicated in octet 5, 5a ... 0000 1011 Full or Half rate TCH channel, Half rate preferred, changes allowed... Preference between permitted speech versions for the respective channel rates as indicated in octet 5, 5a ... 0000 1111 Full or Half rate TCH channel, changes allowed ... Preference between permitted speech versions as indicated in octet 5, 5a ... 0001 1010 Full or Half rate TCH channel, Full rate preferred, changes not allowed... Preference between permitted speech versions for the respective channel rates as indicated in octet 5, 5a ... 0001 1011 Full or Half rate TCH channel. Half rate preferred, changes not allowed... Preference between permitted speech versions for the respective channel rates as indicated in octet 5, 5a ... 0001 1111 Full or Half rate TCH channel, changes not allowed ... Preference between permitted speech versions as indicated in octet 5, 5a ... All other values are reserved.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 133/218 133
MCD
If octet 3 indicates data then octet 4 shall be coded as: 0000 1000 Full rate TCH channel Bm 0000 1001 Half rate TCH channel Lm (not used) 0000 1010 Full or Half rate TCH channel, Full rate preferred, changes allowed... 0000 1011 Full or Half rate TCH channel, Half rate preferred, changes allowed... 0001 1010 Full or Half rate TCH channel, Full rate preferred, changes not allowed 0001 1011 Full or Half rate TCH channel. Half rate preferred, changes not allowed 0010 0xxx FR multislot, changes allowed (not used) 0011 0xxx FR multislot, changes not allowed (not used) with : xxx 000 1 TCH 001 2 TCHs 010 3 TCHs 011 4 TCHs 100 5 TCHs 101 6 TCHs 110 7 TCHs 111 8 TCHs All other values are reserved. For speech : octets 5, 5a, ... : Ext 0 No extension (last octet ) 1 Extension, additional octet(s) 765 4321 000 0001 GSM speech full rate version 1 001 0001 GSM speech full rate version 2 010 0001 GSM speech full rate version 3 000 0101 GSM speech half rate version 1 001 0101 GSM speech half rate version 2 (not used) 010 0101 GSM speech half rate version 3 All other values are reserved For a data call : octet 5, 5a : Ext 0 No extension (last octet ) 1 extension, additional octet(s) T/NT 0 1 Transparent Service Non transparent Service
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Non multislot, non-transparent service : bits 6-1 indicate the radio interface data rate; 65 4321 00 0000 12 kbits/s for TCH FR 6 kbits/s for TCH HR (not used) 01 0000 12 kbits/s 01 0001 6 kbits/s (not used) 01 1000 14.5 kbit/s (not used) 11 0001 29 kbits/s (not used) 11 0100 43.5 kbit/s (not used) All other values are reserved. ED 04 Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 134/218 134
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Non multislot, transparent service : bits 6-1 indicate the data rate; 65 4321 01 0000 9.6 kbits/s 01 0001 4.8 kbits/s 01 0010 2.4 kbits/s 01 0011 1.2 kbits/s 01 0100 600 bits/s 01 0101 1200/75 bit/s (1200 downlink, 75 uplink) (not used) 01 1000 14.4 kbit/s (not used) 11 1001 28.8 kbit/s (not used) 11 1010 32.0 kbit/s (not used) All other values are reserved. Multislot, non-transparent service : bits 6-1 (octet 5) indicate the radio interface data rate; 65 4321 01 0110 58 / 58 kbit/s (4x14.5 kbit/s or 2 x29.0 kbit/s), not used 01 0100 48.0 / 43.5 / 43.5 kbit/s (4x12 kbit/s or 3x14.5 kbit/s or 1x43.5 kbit/s), not used 01 0011 36 / 29 / 29 kbit/s (3x12 kbit/s or 2x14.5 kbit/s or 1 x 29.0 kbit/s), not used 01 0010 24.0 / 24.0 kbit/s (4x6 kbit/s or 2x12 kbit/s), not used 01 0001 18.0 / 14.5 kbit/s (3x6 kbit/s or 1x14.5 kbit/s), not used 01 0000 12.0 / 12.0 kbits/s (2x6 kbit/s or 1x12 kbit/s), not used All other values are reserved. Multislot, transparent service bits 6-1 (octet 5) indicate the data rate; 65 4321 01 1111 64 kbit/s, bit transp. (not used) 01 1110 56 kbit/s, bit transp. (not used) 01 1101 56 kbit/s (not used) 01 1100 48 kbit/s (not used) 01 1011 38.4 kbit/s (not used) 01 1010 28.8 kbit/s (not used) 01 1001 19.2 kbit/s (not used) 01 1000 14.4 kbit/s (not used) 01 0001 32 kbit/s (not used) 01 0000 9.6 kbit/s (not used) All other values are reserved. Octet 5a : Bit 8 reserved for extension, set to value 0 (= no extension) for this message. Allowed radio interface data rate : Bit 7 : 0 14.5/14.4 kbit/s not allowed (not used) 1 43.5 kbit/s (TCH/F43.2) allowed (not used) Bit 6 : 0 32.0 kbit/s (TCH/F32.0) not allowed (not used) 1 32.0 kbit/s (TCH/F32.0) allowed (not used) Bit 5 : 0 29.0 kbit/s (TCH/F28.8) not allowed (not used) 1 29.0 kbit/s (TCH/F28.8) allowed (not used) ED 04 Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 135/218 135
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
0 1 0 0 1 0 1
14.5/14.4 kbit/s (TCH/F14.4) not allowed (not used) 14.5/14.4 kbit/s (TCH/F14.4) allowed (not used) Spare 12.0/9.6 kbit/s not allowed (not used) 12.0/9.6 kbit/s allowed (not used) 6.0/4.8 kbit/s not allowed (not used) 6.0/4.8 kbit/s allowed (not used)
PARAMETER ORIGIN - ACTION ON PARAMETER Stored in order to be able to allocate the required channel. Use for the sending of the "Channel Activation" message to the BTS and the "Handover Command" message to the MS (this message is sent through the MSC and the serving BSC).
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 136/218 136
MCD
TYPE : M DEFINITION This element contains the user data encryption information used to control any encryption equipment at the BSS. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 1 3 0 2 1 1 0
Length (1 <= value <= 9) Permitted Algorithms Key : Key (continued) SUB PARAMETER DEFINITION Algorithm Identifier The permitted algorithms octet is a bit map indicating the encryption algorithms from which the BSS may select the algorithm to be used. Bit No 1 No encryption 2 GSM A5/1 3 GSM A5/2 4 GSM A5/3 Not supported 5 GSM A5/4 Not supported 6 GSM A5/5 Not supported 7 GSM A5/6 Not supported 8 GSM A5/7 Not supported A bit position encoded as 1 indicates that the BSS may use the encryption algorithm represented by that bit position. A bit position encoded as 0 indicates that the BSS shall not use the encryption algorithm represented by that bit position. A permitted algorithms octet containing all bits encoded as 0 shall not be used. The key shall be 8 octets maximum. PARAMETER ORIGIN - ACTION ON PARAMETER Stored at the BSC in order to be able to give the information to the BTS (during internal Handover for example, or when the BSC allocates a TCH). :
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 137/218 137
MCD
TYPE : M (if Classmark information type 2 is not present) DEFINITION To provide the network with Information concerning the capabilities of the MS. BIT DESCRIPTION 8 0 0 7 0 6 0 5 1 ES_ IND 4 1 A5/1 3 1 2 0 RF power capab. 1 1
Revision level
SUB PARAMETER DEFINITION Revision level : 00 Reserved for Phase 1 01 Used for phase 2 MSs. 10 Used by mobile stations supporting R99 or later versions of the protocol All other values reserved ES-IND : 0 Controlled Early Classmark Sending option not implemented 1 Controlled Early Classmark Sending option implemented A5/1 : 0 1
RF Power capability : BCCH = GSM900 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 0 1 1 class 4 1 0 0 class 5 All other values reserved BCCH = DCS1800 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 (handled as class 1 by the Alcatel BSS) All other values reserved BCCH = DCS1900 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 handled as class 1 All other values reserved PARAMETER ORIGIN - ACTION ON PARAMETER The BSC is non transparent to this parameter, in order to read the capabilities of the attached MSs. This phase 2 format is always used by the BSC to decode this IE.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 138/218 138
MCD
TYPE : M (if classmark information type 1 is not present) DEFINITION : Defines certain attributes of the Mobile Station equipment in use on a particular transaction as given by a MS supporting GSM phase 1. BIT DESCRIPTION 8 0 7 0 6 0 5 1 Length Revision level 0 Encryption Algorithm 0 SM. cap RF power Capability Frequency capability 4 0 3 0 2 1 1 0 1 2 3 4
SUB PARAMETER DEFINITION Revision level : 0 0 0 Reserved for phase 1. All other values reserved Encryption Algorithm : 00 Algorithm A5/1 All other values reserved. RF Power capability : BCCH = GSM900 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 0 1 1 class 4 1 0 0 class 5 All other values reserved BCCH = DCS1800 0 0 0 class 1 0 0 1 class 2 All other values reserved
SM Capability : 0 short message capability not present 1 short message capability present FC Frequency Capability : 0 0 0 Band no 0 All other values reserved PARAMETER ORIGIN - ACTION ON PARAMETER This is the classmark information type 2 as sent by a phase 1 MS. The BSC takes this information in order to have the MS power capability for the power control and algorithm information. Note: The BSC will decode this IE as if it was a phase 2 classmark info IE. ED 04 Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 139/218 139
MCD
TYPE : M (if classmark information type 1 is not present) DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 7 0 6 0 5 1 Length 0 spare 0 spare CM3 Revision ES-IND A5/1 level PS SS Screen. SM. Capa. Indicator cap 0 LCSVA UCS2 SoLSA spare CAP RF power Capability VBS CMSP VGCS A5/3 FC A5/2 4 0 3 0 2 1 1 0 1 2 3 4 5
SUB PARAMETER DEFINITION Revision level : 00 Reserved for phase 1. 01 Used by phase 2 mobiles 10 Used by mobile stations supporting R99 or later versions of the protocol All other values reserved ES-IND : 0 1 A5/1 : 0 1 algorithm A5/1 available algorithm A5/1 not available. Controlled Early Classmark Sending option not implemented Controlled Early Classmark Sending option implemented
RF Power capability : BCCH = GSM900 and GSM850 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 0 1 1 class 4 1 0 0 class 5 All other values reserved BCCH = DCS1800 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 (handled as class 1 by the Alcatel BSS) All other values reserved BCCH = DCS1900 0 0 0 class 1 0 0 1 class 2 0 1 0 class 3 (handled as class 1 by the Alcatel BSS) All other values reserved ED 04 Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 140/218 140
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
PS Capability (Pseudo-Synchronization) : 0 PS capability not present 1 PS capability present Not checked by the BSC. SS Screening Indicator : 00 01 10 11 Not checked by the BSC. SM Capability : 0 MS does not support mobile terminated point to point SMS 1 MS supports mobile terminated point to point SMS VBS Voice Broadcast Service 0 no VBS capability or no notifications wanted 1 VBS capability and notifications wanted Not checked by the BSC. VGCS Voice Group Call Service 0 no VGCS capability or no notifications wanted 1 VGCS capability and notifications wanted Not checked by the BSC. FC Frequency Capability : GSM900 0 The MS does not support the extension band G1 in addition to the primary GSM band. 1 The MS does support the extension band G1. DCS1800, DCS1900, GSM850, and UMTS to GSM handover 0 Reserved for future use Note: only FC is checked in this release and only in GSM900 configuration. CM3 Classmark 3 : 0 No additional MS capability 1 Additional MS capabilities are described in the classmark 3 information element. LCS VA CAPability (LCS value added location request notification capability). Required for MS supporting GSM. 0 LCS value added location request notification capability not supported 1 LCS value added location request notification capability supported Not checked by the BSC. UCS2 treatment: Required for MS suppporting UMTS. 0 the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2. 1 the ME has no preference between the use of the default alphabet and the use of UCS2. Not checked by the BSC. SoLSA: Required for MS suppporting GSM. 0 The ME does not support SoLSA. 1 The ME supports SoLSA. ED 04 Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 141/218 141
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
CMSP: CM Service Prompt 0 "Network initiated MO CM connection request" not supported. 1 "Network initiated MO CM connection request" supported for at least one CM protocol. Not checked by the BSC. A5/3 : 0 A5/3 ciphering algorithm not available 1 A5/3 ciphering algorithm available Not checked by the BSC. A5/2 : 0 1
PARAMETER ORIGIN - ACTION ON PARAMETER The BSC takes this information in order to have the MS power capability for the power control and algorithm information, the MS frequency capability and the MS ciphering capability. Default values are used for 'revision level', 'RF Power Capability' and MS cipher capability if the BSC can not decode these fields (see reference [7]). Additional mobile info can be obtained by invoking the classmark enquiry procedure.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 142/218 142
MCD
TYPE : Cell identifier serving : M, Cell identifier target : M (Phase 2 GSM), O (Phase 1 GSM) DEFINITION : Identification of a cell within the BSS. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 1 1 2 3 4-10
SUB PARAMETER DEFINITION : Cell identification discriminator 0000 0001 0010 0011 1000 1001 1010 1011 The whole cell global Identification, CGI Location Area Code, LAC, and Cell Identity, CI Cell Identity, CI No cell is associated with the transaction (not supported) Intersystem Handover to UTRAN or cdma2000.PLMN-ID, LAC and RNC-ID, is used to identify the target RNC (not supported) Intersystem Handover to UTRAN or cdma2000. The RNC-ID is coded to identify the target RNC (not supported) Intersystem Handover to UTRAN or cdma2000. LAC and RNC-ID are encoded to identify the target RNC (not supported) Serving Area Identity, SAI, is used to identify the Serving Area of UE in intersystem handover from UTRAN or cdma2000 (used only for serving cell) supported supported supported
Discriminator 0000 : 4 5 6 7 8 9 10 MCC digit 2 MNC digit 3 (Note) MNC digit 2 MCC digit 1 MCC digit 3 4 5 6 7
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 143/218 143
MCD
Discriminator 1011 MCC digit 2 MNC digit 3 (Note) MNC digit 2 MCC digit 1 MCC digit 3 MNC digit 1
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
MCC, MNC : See 3GPP TS 24.008 LAC, Location area code : See 3GPP TS 24.008 CI value, Cell Identity value : See 3GPP TS 24.008 SAI value, Serving Area Identity value : See 3GPP TS 25.143. PARAMETER ORIGIN - ACTION ON PARAMETER The BSC will use the cell identifier (serving) in order to identify if handover is synchronous or asynchronous : If the serving cell identifier is incorrect (not belonging to the BSC or unknown) then an asynchronous handover is performed.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 144/218 144
MCD
6.25.9 PRIORITY
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : O DEFINITION Definition of the priority of the request for traffic channels only. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 1 1 0
SUB PARAMETER DEFINITION pci = Preemption Capability indicator 0 this allocation request shall not pre-empt an existing connection 1 this allocation request may pre-empt an existing connection Priority level: 6543 0000 spare 0001 priority level 1 = highest priority 0010 priority level 2 = second highest priority :::: 1110 priority level 14 = lowest priority 1111 priority not used if queuing is allowed (qa =1) and priority =1111 then lowest priority is assigned. if queuing is allowed (qa =1) and priority =0000 then lowest priority is assigned. qa = queuing allowed indicator 0 queuing not allowed 1 queuing allowed pvi = Preemption Vulnerability Indicator 0 this connection shall not be pre-empted by another allocation request 1 this connection might be pre-empted by another allocation request PARAMETER ORIGIN - ACTION ON PARAMETER - Taken into account in order to queue, if needed, the message. Only 'Pre-emption' not allowed is used by the MSC. - pvi and pci bits are taken into account by the BSC for resource pre-emption when the eMLPP feature is activated.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 145/218 145
MCD
TYPE : O DEFINITION : Defines the terrestrial channel over which the call will pass. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 0 2 0 1 1
PCM multiplex in use (high part) (low part) SUB PARAMETER DEFINITION : PCM Multiplex TS in use defines the terrestrial channel TS in use
PARAMETER ORIGIN - ACTION ON PARAMETER Stored for further usage. Control if terrestrial channel is already in use.
Bits 2 to 8 spare are set to 0. Bit 1 = 1 : DTX disabled in downlink direction 0 : DTX enabled in downlink direction
PARAMETER ORIGIN - ACTION ON PARAMETER It has to be included only for speech and not for signalling. In case of speech, the DTX is sent to the BTS in the "CHANNEL ACTIVATION" message. From the B7.2, the BSC does not take into account the value of the DTXd flag coming from the MSC, but only the flag coming from the OMC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 146/218 146
MCD
6.25.12 CAUSE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : O DEFINITION To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
000
1101
All other causes (Uplink quality, uplink strength, downlink quality, downlink strength, distance, better cell, traffic, ...) will be ignored by the BSS. PARAMETER ORIGIN - ACTION ON PARAMETER If cause is set to "Directed retry" and Channel Type is "full rate speech version 1" and MS revision level is "Phase 1", then trigger a channel mode modify procedure (GM TS 09.94 compliance).
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 147/218 147
MCD
TYPE : O DEFINITION Defines certain attributes of the Mobile Station equipment in use on a particular transaction. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 0 2 1 1 1 1 2
Length
3-14
<Classmark 3 Value part> ::= < spare bit > { < Multiband supported : { 000 } > < A5 bits > | < Multiband supported : { 101 | 110 } > < A5 bits > < Associated Radio Capability 2 : bit(4) > < Associated Radio Capability 1 : bit(4) > | < Multiband supported : { 001 | 010 | 100 } > < A5 bits > < spare bit >(4) < Associated Radio Capability 1 : bit(4) > } { 0 | 1 < R Support > } { 0 | 1 < Multi Slot Capability > } < UCS2 treatment: bit > < Extended Measurement Capability : bit > { 0 | 1 < MS measurement capability > } { 0 | 1 < MS Positioning Method Capability > } { 0 | 1 < EDGE Multi Slot Capability > } { 0 | 1 < EDGE Struct > } { 0 | 1 < GSM 400 Bands Supported : { 01 | 10 | 11 } > < GSM 400 Associated Radio Capability: bit(4) > } { 0 | 1 <GSM 850 Associated Radio Capability : bit(4) > } { 0 | 1 <PCS 1900 Associated Radio Capability : bit(4) > } < UMTS FDD Radio Access Technology Capability : bit > < UMTS TDD Radio Access Technology Capability : bit > < CDMA 2000 Radio Access Technology Capability : bit > { 0 | 1 < DTM GPRS Multi Slot Sub-Class : bit(2) > < MAC Mode Support : bit > {0 | 1< DTM EGPRS Multi Slot Sub-Class : bit(2) > } } { 0 | 1 < Single Band Support > } < spare bit > ; < A5 bits > ::= < A5/7 : bit > < A5/6 : bit > < A5/5 : bit > < A5/4 : bit > ; LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 148/218 148
ED
04
Released
0064_04.DOC 31/05/02
MCD
<R Support>::= < R-GSM band Associated Radio Capability : bit(3) > ;
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
< Multi Slot Capability > ::= < Multi Slot Class : bit(5) > ; < MS Measurement capability > ::= < SMS_VALUE : bit (4) > < SM_VALUE : bit (4) > ; < MS Positioning Method Capability > ::= < MS Positioning Method : bit(5) > ; < EDGE Multi Slot Capability > ::= < EDGE Multi Slot Class : bit(5) > ; <EDGE Struct> : := < Modulation Capability : bit > { 0 | 1 < EDGE RF Power Capability 1: bit(2) > } { 0 | 1 < EDGE RF Power Capability 2: bit(2) > }
SUB PARAMETER DEFINITION Multiband Supported (3 bit field) Band 1 supported (third bit of the field) Bit 3 0 P-GSM not supported 1 P-GSM supported Band 2 supported (second bit of the field) Bit 2 0 E-GSM or R-GSM not supported 1 E-GSM or R-GSM supported Band 3 supported (first bit of the field) Bit 1 0 DCS 1800 not supported 1 DCS 1800 supported Note: A5/4 (1 bit field) 0 1 Encryption algorithm A5/4 not available Encryption algorithm A5/4 available The indication of support of P-GSM band or E-GSM or R-GSM band is mutually exclusive. For single band mobile station all bits are set to 0.
Not checked by the BSC. A5/5 (1 bit field) 0 1 Encryption algorithm A5/5 not available Encryption algorithm A5/5 available
Not checked by the BSC. A5/6 (1 bit field) 0 1 Encryption algorithm A5/6 not available Encryption algorithm A5/6 available
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 149/218 149
MCD
Not checked by the BSC. Associated radio capability 1 (4 bit field): If either of P-GSM or E-GSM or R-GSM is supported, this 1 field indicates the radio capability for P-GSM, E-GSM or R-GSM, and the radio capability 2 field indicates the radio capability for DCS1800 if supported, and is spare otherwise. If none of P-GSM or E-GSM or R-GSM are supported, this field indicates the radio capability for DCS1800 GSM900 0 0 0 1 class 1 0 0 1 0 class 2 0 0 1 1 class 3 0 1 0 0 class 4 0 1 0 1 class 5 All other values reserved DCS1800 0 0 0 1 class 1 0 0 1 0 class 2 0 0 1 1 class 3 handled as class 1 All other values reserved Not checked by the DCS1900 BSC and GSM850 / DCS1900 BSC. Associated radio capability 2 (4 bit field): If either of P-GSM or E-GSM or R-GSM is supported, this field indicates the radio capability for DCS1800 if supported, and is spare otherwise DCS1800 0 0 0 1 class 1 0 0 1 0 class 2 0 0 1 1 class 3 handled as class 1 All other values reserved Not implemented in the DCS1900 BSS and GSM850 / DCS1900 BSS R Support (1 bit field)pres: 0 R-GSM band is not supported 1 R-GSM band is supported. Not checked by the DCS1900, GSM850 / DCS1800 BSS and GSM850 / DCS1900 BSS. R-GSM band Associated Radio Capability (3 bits field) : 001 Class 1 : 20 W 010 Class 2 : 8W 011 Class 3 : 5W 100 Class 4 : 2W 101 Class 5 : 0.8 W Not checked by the DCS1900 BSC, GSM850 / DCS1800 BSS and GSM850 / DCS1900 BSS..
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 150/218 150
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
R-GSM band Associated Radio Capability (3 bits field) : 001 Class 1 : 20 W 010 Class 2 : 8W 011 Class 3 : 5W 100 Class 4 : 2W 101 Class 5 : 0.8 W Not checked by the DCS1900 BSC. Multi Slot Class (5 bit field) In case the MS supports the use of multiple timeslots then the Multi Slot Class field is coded as the binary representation of the multislot class defined in 3GPP TS GSM 05.02. Not checked by the BSC. UCS2 treatment (1 bit field): 0 the ME has a preference for the default alphabet over UCS2 1 the ME has no preference between the use of the default alphabet and the use of UCS2 Not checked by the BSC. Extended Measurement Capability (1 bit field): 0 the MS does not support Extended Measurements 1 the MS supports Extended Measurements Not checked by the BSC. SMS_VALUE (Switch-Measure-Switch) (4 bit field): The SMS field indicates the time needed for the mobile station to switch from one radio channel to another, perform a neighbour cell power measurement, and the switch from that radio channel to another radio channel. 0000 1/4 timeslot (~144 microseconds) 0001 2/4 timeslot (~288 microseconds) 0010 3/4 timeslot (~433 microseconds) ... 1111 16/4 timeslot (~2307 microseconds) Not checked by the BSC. SM_VALUE (Switch-Measure) (4 bit field): The SM field indicates the time needed for the mobile station to switch from one radio channel to another and perform a neighbour cell power measurement. 0000 1/4 timeslot (~144 microseconds) 0001 2/4 timeslot (~288 microseconds) 0010 3/4 timeslot (~433 microseconds) ... 1111 16/4 timeslot (~2307 microseconds) Not checked by the BSC. MS Positioning Method Capability (1 bit field): This bit indicates whether the MS supports Positioning Method or not for the provision of Location Services. Not checked by the BSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 151/218 151
MCD
MS Positioning Method (5 bit field): This field indicates the Positioning Method(s) supported by the mobile station. MS assisted E-OTD Bit 5 0 MS assisted E-OTD not supported 1 MS assisted E-OTD supported Not checked by the BSC. MS based E-OTD Bit 4 0 MS based E-OTD not supported 1 MS based E-OTD supported Not checked by the BSC. MS assisted GPS Bit 3 0 MS assisted GPS not supported 1 MS assisted GPS supported Not checked by the BSC. MS assisted GPS Bit 2 0 MS based GPS not supported 1 MS based GPS supported Not checked by the BSC. MS conventional GPS Bit 1 0 conventional GPS not supported 1 conventional GPS supported Not checked by the BSC. EDGE Multi Slot class (5 bit field): In case the EDGE MS supports the use of multiple timeslots and the number of supported time slots is different from number of time slots supported for GMSK then the EDGE Multi Slot class field is included and is coded as the binary representation of the multislot class defined in 3GPP TS GSM 05.02. Not checked by the BSC. Modulation Capability (1 bit field): Modulation Capability field indicates the supported modulation scheme by MS in addition to GMSK 0 8-PSK supported for downlink reception only 1 8-PSK supported for uplink transmission and downlink reception Not checked by the BSC. EDGE RF Power Capability 1 (2 bit field) If 8-PSK is supported for both uplink and downlink, the EDGE RF Power Capability 1 field indicates the radio capability for GSM900 and GSM850. Not checked by the BSC. EDGE RF Power Capability 2 (2 bit field) If 8-PSK is supported for both uplink and downlink, the EDGE RF Power Capability 2 field indicates the radio capability for DCS1800 or DCS1900 if supported, and is not included otherwise. Not checked by the BSC.
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 152/218 152
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
GSM 400 Bands Supported (2 bit field) 01 GSM 480 supported, GSM 450 not supported 10 GSM 450 supported, GSM 480 not supported 11 GSM 450 supported, GSM 480 supported Not checked by the BSC. GSM 400 Associated Radio Capability (4 bit field) If either GSM 450 or GSM 480 or both is supported, the GSM 400 Associated Radio Capability field indicates the radio capability for GSM 450 and/or GSM 480. Not checked by the BSC. GSM 850 Associated Radio Capability (4 bit field) This field indicates whether GSM 850 band is supported and its associated radio capability. 001 Class 1 : 20 W 010 Class 2 : 8W 011 Class 3 : 5W 100 Class 4 : 2W 101 Class 5 : 0.8 W
PCS 1900 Associated Radio Capability (4 bit field) This field indicates whether DCS 1900 band is supported and its associated radio capability. Not checked by the BSC. UMTS FDD Radio Access Technology Capability (1 bit field) 0 UMTS FDD not supported 1 UMTS FDD supported Not checked by the BSC. UMTS TDD Radio Access Technology Capability (1 bit field) 0 UMTS TDD not supported 1 UMTS TDD supported Not checked by the BSC. CDMA 2000 Radio Access Technology Capability (1 bit field) 0 CDMA2000 not supported 1 CDMA2000 supported Not checked by the BSC. DTM GPRS Multi Slot Sub-Class (2 bit field) 00 Sub-Class 1 supported 01 Sub-Class 5 supported 10 Sub-Class 9 supported 11 Reserved for future extension. If received, the network shall interpret this as 00 Not checked by the BSC. DTM EGPRS Multi Slot Sub-Class (2 bit field) This field indicates the EGPRS DTM capabilities of the MS. The DTM EGPRS Multi Slot Sub-Class is independent from the Multi Slot Capabilities field. This field shall be included only if the mobile station supports EGPRS DTM. This field is coded as the DTM GPRS Multi Slot Sub-Class field. Not checked by the BSC. LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 153/218 153
ED
04
Released
0064_04.DOC 31/05/02
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
MAC Mode Support (1 bit field) This field indicates whether the MS supports Dynamic and Fixed Allocation or only supports Exclusive Allocation. 0 Dynamic and Fixed Allocation not supported 1 Dynamic and Fixed allocation supported Not checked by the BSC. Single Band Support (4 bit field) This field is sent in case of UMTS to GSM handover if the MS supports UMTS and one and only one GSM band with the exception of R-GSM. It indicates the GSM band supported by the MS. 0000 E-GSM is supported 0001 P-GSM is supported 0010 DCS1800 is supported 0011 GSM450 is supported 0100 GSM480 is supported 0101 GSM850 is supported 0110 DCS1900 is supported Not checked by the BSC. PARAMETER ORIGIN - ACTION ON PARAMETER None.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 154/218 154
MCD
TYPE : O DEFINITION Describes the channel allocated to the MS. BIT DESCRIPTION 8 0 7 0 6 1 5 1 4 0 3 0 2 0 Channel 1 1 1 2
Channel mode SUB PARAMETER DEFINITION Channel mode : 0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111
signalling only speech (FR or HR) data, 43.5 kbit/s downlink and 14.5 kbit/s uplink (not implemented) data, 12.0 kbit/s radio interface rate data, 6.0 kbit/s radio interface rate data, 3.6 kbit/s radio interface rate data, 14.5 kbit/s radio interface rate (not implemented) data, 29 kbit/s radio interface rate (not implemented) data, 32 kbit/s radio interface rate (not implemented) data, 43.5 kbit/s radio interface rate (not implemented) data, 29.0 kbit/s downlink and 14.5 kbit/s uplink (not implemented) data, 43.5 kbit/s downlink and 29.0 kbit/s uplink (not implemented) data, 14.5 kbit/s downlink and 43.5 kbit/s uplink (not implemented) data, 14.5 kbit/s downlink and 29.0 kbit/s uplink (not implemented) data, 29.0 kbit/s downlink and 43.5 kbit/s uplink (not implemented) reserved
Channel : 0001 SDDCH 0100 8 Full rate TCHs (not implemented) 1000 1 Full rate TCH 1001 1 Half rate TCH 1010 2 Full rate TCHs (not implemented) 1011 3 Full rate TCHs (not implemented) 1100 4 Full rate TCHs (not implemented) 1101 5 Full rate TCHs (not implemented) 1110 6 Full rate TCHs (not implemented) 1111 7 Full rate TCHs (not implemented) All other values reserved PARAMETER ORIGIN - ACTION ON PARAMETER None.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 155/218 155
MCD
TYPE : O DEFINITION Speech version being used by the BSS. BIT DESCRIPTION 8 0 spare 7 1 6 0 5 0 4 0 3 0 2 0 1 0 1 2
SUB PARAMETER DEFINITION Speech version identifier is coded in the same way as the permitted speech version identifier in the Channel type information element. PARAMETER ORIGIN - ACTION ON PARAMETER None.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 156/218 156
MCD
TYPE : O DEFINITION Used as a general container for passing Field Elements transparently between BSSs via the MSC. Only the Extra information and MultiRate configuration information Field Elements are used by the BSC. When present in the Old BSS to New BSS Information IE: -The Extra information provides resource pre-emption indication, The MultiRate configuration information gives all parameters related to a multi-rate speech codec.
Length
Extra Information
2<=length<=6 MR version NSCB ICMI Spare 0 Parameters for multirate speech Start mode
octet n (n 13)
1 The old BSS recommends that this allocation request is allowed to pre-empt an existing connection based on the information supplied in the Priority IE, if available. lcs (Location Services information): 0 1 ED 04 Released
0064_04.DOC 31/05/02
Not used
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 157/218 157
MCD
Multirate configuration information: MR version (Multirate speech version): 0 0 1 Adaptive Multirate speech version 1
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
all other values are reserved. NSCB (Noise Suppression Control Bit): 0 Noise Suppression can be used (default) 1 Noise Suppression shall be turned off ICMI (Initial Codec Mode Indicator): 0 The initial codec mode is defined by the implicit rule in 3GPP TS 05.09 1 The initial codec mode is defined by the Start Mode field Start Mode: xx The initial codec mode is coded as in 3GPP TS 05.09 section 3.4.1
provided
Parameters for multirate speech: 1) Parameters for multirate speech field for the MR version 1 when a set with one codec mode is chosen 8 7 6 5 4 3 2 1 octet x
2) Parameters for multirate speech field for the MR version 1 when a set with two codec modes is chosen 8 7 6 5 4 3 2 1 octet x octet x+1 Spare Hysteresis 1 0 0 0 0 octet x+2
3) Parameters for multirate speech field for the MR version 1 when a set of three codec modes is chosen 8 7 6 5 4 3 2 1 octet x octet x+1 octet x+2 Spare Hysteresis 2 0 0 octet x+3
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 158/218 158
MCD
4) Parameters for multirate speech field for the MR version 1 when a set of four modes is chosen
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Set of AMR codec modes Spare 0 0 Threshold 1 Threshold 2 Threshold 3 Hysteresis 2 Hysteresis 3
octet x+4
Set of adaptive multirate codec modes field (octet x) Bit 8 0 1 Bit 7 0 1 Bit 6 0 1 Bit 5 0 1 Bit 4 0 1 Bit 3 0 1 Bit 2 0 1 Bit 1 0 1 4,75 kbit/s codec rate is not part of the subset; 4,75 kbit/s codec rate is part of the subset; 5,15 kbit/s codec rate is not part of the subset; 5,15 kbit/s codec rate is part of the subset; 5,90 kbit/s codec rate is not part of the subset; 5,90 kbit/s codec rate is part of the subset; 6,70 kbit/s codec rate is not part of the subset; 6,70 kbit/s codec rate is part of the subset; 7,40 kbit/s codec rate is not part of the subset; 7,40 kbit/s codec rate is part of the subset; 7,95 kbit/s codec rate is not part of the subset; 7,95 kbit/s codec rate is part of the subset; 10,2 kbit/s codec rate is not part of the subset; 10,2 kbit/s codec rate is part of the subset; 12,2 kbit/s codec rate is not part of the subset; 12,2 kbit/s codec rate is part of the subset;
Threshold j (6 bits), see Note 1 Coded as the binary representation of a value N. N corresponds to the threshold of C/I in dB, as defined in 3GPP TS 05.09;
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 159/218 159
MCD
Hysteresis j (4 bits), see Note 1 Coded as the binary representation of the hysteresis value associated to THRj, as defined in 3GPP TS 05.09. Note 1: j = 1 corresponds to the lowest value of threshold in dB, j = 2 to the second lowest, j = 3 to the highest value. PARAMETER ORIGIN - ACTION ON PARAMETER
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST 3BK 11203 0064 DSZZA 160/218 160
MCD
HANDOVER REQUEST ACKNOWLEDGE ABIS A SCCP Connection 08.08 3.2.1.10 This message is sent from target BSC to MSC and indicates that the request to support a Handover can be supported, and indicates also to which radio channel the MS should be directed. BSC MSC INFORMATION ELEMENT NAME TYPE COMMENT LENGTH
FUNCTION DIRECTION
Message type Layer 3 Information Chosen channel Chosen encryption algorithm Circuit Pool Speech version (chosen) Circuit identity code LSA Identifier
MF MV OF OF OF OF OF OF
(1) (2) (3) not used (4) not used not used
ABNORMAL SITUATION
TIMER
T9113
(ref. [21])
(*) n is the length of the layer 3 information (04.08 HANDOVER COMMAND). n 9, see ref [20]. (1) (2) (3) This information field carries a radio interface "HANDOVER COMMAND" message This will only be sent if the channel type IE in the HANDOVER REQUEST indicated either SDCCH/no preferences or TCH with a preference. This will only be included if the MSC indicates that more than one ciphering algorithm is permitted. This possibility would have been indicated to the BSC in the Encryption Information IE contained in the last received HANDOVER REQUEST or CIPHER MODE COMMAND messages. Included at least when the speech version choice was done by the BSS.
(4)
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST ACKNOWLEDGE 3BK 11203 0064 DSZZA 161/218 161
MCD
8 0 0 Layer 3 Information
7 0 0
6 0 0
5 1 1
4 0 0
3 0 1
2 1 1
1 0 1
optional
Channel mode 0 0 1 0 1
Channel 1 0 0 optional
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST ACKNOWLEDGE 3BK 11203 0064 DSZZA 162/218 162
MCD
TYPE : M DEFINITION It is used to pass Layer 3 messages from the Air Interface to the MSC unchanged, or from the MSC to the MS. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 0 3 1 2 1 1 1 1 2 3 : N SUB PARAMETER DEFINITION This information element contains in that message the "Handover Command" message which has to be sent to the MS. The coding is the same as the "Handover Command" in the Air Interface. PARAMETER ORIGIN - ACTION ON PARAMETER None.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST ACKNOWLEDGE 3BK 11203 0064 DSZZA 163/218 163
MCD
TYPE : O DEFINITION Description of the channel allocated to the MS. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 0 3 0 2 0 1 1 1 2
Channel mode
Channel
SUB PARAMETER DEFINITION Channel mode Bit 8765 0000 No channel mode indication 0001 data, 29.0 kbit/s radio interface rate (not implemented) 0010 data, 32.0 kbit/s radio interface rate (not implemented) 0011 data, 43.5 kbit/s radio interface rate (not implemented) 0100 data, 43.5 kbit/s downlink and 14.5 kbit/s uplink (not implemented) 0101 data, 29.0 kbit/s downlink and 14.5 kbit/s uplink (not implemented) 0110 data, 43.5 kbit/s downlink and 29.0 kbit/s uplink (not implemented) 0111 data, 14.5 kbit/s downlink and 43.5 kbit/s uplink (not implemented) 1000 Signalling only 1001 Speech (FR or HR) 1010 data, 14.5 kbit/s downlink and 29.0 kbit/s uplink (not implemented) 1011 Data 12.0 kbit/s (radio interface rate) 1100 Data 6.0 kbit/s (radio interface rate) 1101 Data 3.6 kbit/s (radio interface rate) 1110 Data 14.5 kbit/s (radio interface rate) 1111 data, 29.0 kbit/s downlink and 43.5 kbit/s uplink (not implemented) All other values reserved Channel Bit 4321 0000 None (not used) 0001 SDCCH 0100 8 Full rate TCHs (not used) 1000 1 Full rate TCH 1001 1 Half rate TCH 1010 2 Full rate TCHs (not used) 1011 3 Full rate TCHs (not used) 1100 4 Full rate TCHs (not used) 1101 5 Full rate TCHs (not used) 1110 6 Full rate TCHs (not used) 1111 7 Full rate TCHs (not used) All other values reserved PARAMETER ORIGIN - ACTION ON PARAMETER This is a phase 2 IE. It is only sent if the channel (HR or FR) has been chosen by the BSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST ACKNOWLEDGE 3BK 11203 0064 DSZZA 164/218 164
MCD
TYPE : O DEFINITION Description of the encryption algorithm allocated to the MS. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 1 3 1 2 0 1 0 1 2
Algorithm Identifier SUB PARAMETER DEFINITION 8765 4321 0000 0001 0000 0010 0000 0011 0000 0100 0000 0101 0000 0110 0000 0111 0000 1000 All other values reserved Bit
No encryption used GSM A5/1 GSM A5/2 GSM A5/3 GSM A5/4 GSM A5/5 GSM A5/6 GSM A5/7
Not supported Not supported Not supported Not supported Not supported
PARAMETER ORIGIN - ACTION ON PARAMETER This is a phase 2 IE. It is only sent if the ciphering algorithm has been chosen by the BSC.
SUB PARAMETER DEFINITION Speech version identifier is coded in the same way as the permitted speech version identifier in the Channel type information element. PARAMETER ORIGIN - ACTION ON PARAMETER This is a phase 2 IE. It is only sent if the speech version has been chosen by the BSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUEST ACKNOWLEDGE 3BK 11203 0064 DSZZA 165/218 165
MCD
HANDOVER REQUIRED ABIS A SCCP Connection 08.08 3.2.1.9 This message is sent from the serving BSC to indicate that for a given MS which already has a dedicated radio resource assigned, a handover is required for the reason given by the cause element BSC
FUNCTION
DIRECTION
TYPE MF MF OF MV OV OF OF OF VF VF VF
MSC COMMENT LENGTH 1 3 1 4n+3(*) or 7n+3 not used (1) (2) not used (3) not used not used 2 2 2 5-13 n-m (**) n-m (**) 12+4n or 12+7n TIMER
INFORMATION ELEMENT NAME INFORMATION ELEMENT LIST Message type Cause Response request Cell Identifier List (Preferred) Circuit Pool List Current channel type 1 Speech version (used) Queuing indicator Old BSS to New BSS Information Source RNC to target RNC transparent information (UMTS) Source RNC to target RNC transparent information (cdma2000)
ABNORMAL SITUATION
T7 T_HO_REQ _LOST
(*) n is the number of cells. n 3 (**) (1) (2) the length of this information element depends on the length of RNC specific information, see TS 25.413 for detail. Included if allowed by O&M parameter. Included when the channel mode is speech, and only in this case.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 166/218 166
MCD
(3)
Only the Extra Information and MultiRate configuration information Field Elements are used by the BSC.
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 167/218 167
MCD
7 0 0
6 0 0
5 1 0
4 0 0
3 0 1
2 0 0
1 1 0
option
LAC cont. CI value CI value cont. MCC digit 2 MNC digit 3 (Note) MNC digit 2 LAC LAC cont. CI value CI value cont. CELL P MCC digit 1 MCC digit 3 MNC digit 1 CELL 1 LAC LAC cont. CI value CI value cont.
Note
3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111. LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 168/218 168
ED
04
Released
0064_04.DOC 31/05/02
MCD
Current Channel
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
optional
Channel mode 0 Sp 0 0 1 1 0 0 0
Channel 0 0 0 optional
Length 0 0 0 0 0 0 0 1 opt.
Extra information
MultiRate
configuration information
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 169/218 169
MCD
7 0 0
6 0 0
5 1 0
4 0 0
3 0 1
2 0 0
1 1 0
option
LAC cont. CI value CI value cont. MCC digit 2 MNC digit 3 (Note) MNC digit 2 LAC LAC cont. CI value CI value cont. CELL P MCC digit 1 MCC digit 3 MNC digit 1 CELL 1 LAC LAC cont. CI value CI value cont.
Note
3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 170/218 170
MCD
6.27.3 CAUSE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : M DEFINITION : To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
Length 0 SUB PARAMETER DEFINITION Used cause values : 765 Class 000 : Normal event Uplink Quality Uplink Strength Downlink Quality Downlink Strength Distance Better Cell Directed retry Traffic handover 000 000 000 000 000 000 000 000 4321 0010 0011 0100 0101 0110 1100 1101 1111 Cause
PARAMETER ORIGIN - ACTION ON PARAMETER Only this format (without extension) is used. The BSC gives in this parameter the reason of the Handover requested to the MSC.
PARAMETER ORIGIN-ACTION ON PARAMETER This optional information element is included when it is requested by a BSS-O&M parameter. LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 171/218 171
ED
04
Released
0064_04.DOC 31/05/02
MCD
TYPE : M DEFINITION : This element uniquely identifies cells within a BSS and is of variable length N. P is the number of elements within the list and the range for P is 1 to 16 (included). BIT DESCRIPTION 0 0 0 1 1 0 1 0
SUB PARAMETER DEFINITION Cell identification discriminator (0) 0000 The whole cell global Identification, CGI (1) 0001 Location Area Code, LAC, and Cell Identity, CI (2) 0010 Cell Identity, CI, (3) 0011 No cell is associated with the transaction (4) 0100 Location Area Identification, LAI (5) 0101 Location Area Code, LAC. (6) 0110 All cells of the BSS. (8) 1000 PLMN-ID, LAC and RNC-ID (9) 1001 RNC-ID (10)1010 LAC and RNC-ID (11)1011 SAI of UE (Serving Area Identity) All other values are reserved.
not used not used not used not used not used not used not used not used not used
Detailed layout depending on discriminator values (0 or 1) is provided in next pages. Cell identification discriminator = 0 Length = 1 + 7 x P
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 172/218 172
MCD
Octets 4 to N: CELL 1
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
MCC digit 2 MNC digit 3 (Note) MNC digit 2 LAC LAC cont. CI value CI value cont. CELL P MCC digit 2 MNC digit 3 (Note) MNC digit 2 LAC LAC cont. CI value CI value cont.
4 5 6 7 8 9 10
Note
3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
Cell identification discriminator = 1 Length = 1 + 4 x P Octets 4 to N: CELL 1 LAC LAC cont. CI value CI value cont. CELL P LAC LAC cont. CI value CI value cont. N-3 N-2 N-1 N 4 5 6 7
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 173/218 173
MCD
LAC, Location area code : See 3GPP TS 24.008 CI value, Cell Identity value : See 3GPP TS 24.008
PARAMETER ORIGIN - ACTION ON PARAMETER The MSC requires the information from a specific cell controlled by the BSC. This info element is included even in case of mono-cell configuration. The choice between the use of cell discriminator 0 or 1 depends on the value of a BSS-O&M parameter.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 174/218 174
MCD
TYPE : O DEFINITION Describes the channel allocated to the MS. BIT DESCRIPTION 8 0 7 0 6 1 5 1 4 0 3 0 Channel 2 0 1 1 1 2
Channel mode
SUB PARAMETER DEFINITION Channel mode : 0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111
signalling only speech (FR or HR) data, 43.5 kbit/s downlink and 14.5 kbit/s uplink data, 12.0 kbit/s radio interface rate data, 6.0 kbit/s radio interface rate data, 3.6 kbit/s radio interface rate data, 14.5 kbit/s radio interface rate data, 29 kbit/s radio interface rate data, 32 kbit/s radio interface rate data, 43.5 kbit/s radio interface rate data, 29.0 kbit/s downlink and 14.5 kbit/s uplink data, 43.5 kbit/s downlink and 29.0 kbit/s uplink data, 14.5 kbit/s downlink and 43.5 kbit/s uplink data, 14.5 kbit/s downlink and 29.0 kbit/s uplink data, 29.0 kbit/s downlink and 43.5 kbit/s uplink reserved
Channel : 0001 SDDCH 0100 8 Full rate TCHs (not used) 1000 1 Full rate TCH 1001 1 Half rate TCH 1010 2 Full rate TCHs (not used) 1011 3 Full rate TCHs (not used) 1100 4 Full rate TCHs (not used) 1101 5 Full rate TCHs (not used) 1110 6 Full rate TCHs (not used) 1111 7 Full rate TCHs (not used) All other values reserved
PARAMETER ORIGIN - ACTION ON PARAMETER This is a phase 2 IE. It is only sent if EN_SEND_OLD_CHANNEL_MODE is set to "true".
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 175/218 175
MCD
TYPE : O DEFINITION Speech version being used by the BSS. BIT DESCRIPTION 8 0 spare 7 1 6 0 5 0 4 0 3 0 2 0 1 0 1 2
SUB PARAMETER DEFINITION Speech version identifier is coded in the same way as the permitted speech version identifier in the Channel type information element.
PARAMETER ORIGIN - ACTION ON PARAMETER This is a phase 2 IE. It is only sent if EN_SEND_SPEECH_VER is set to "true".
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 176/218 176
MCD
TYPE : O DEFINITION Used as a general container for passing Field Elements transparently between BSSs via the MSC. Only the Extra information and the MultiRate configuration information Field Element are used by the BSC. When present in the Old BSS to New BSS Information IE: -The Extra information provides resource pre-emption indication, -The MultiRate configuration information gives all parameters related to a multi-rate speech codec.
Length
Extra Information
octet n (n 13)
lcs (Location Services information): 0 1 No on-going LCS procedure. An on-going LCS procedure was interrupted by handover.
Not used
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 177/218 177
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Multirate configuration information: MR version (Multirate speech version): 0 0 1 Adaptive Multirate speech version 1 all other values are reserved.
NSCB (Noise Suppression Control Bit): 0 1 Noise Suppression can be used (default) Noise Suppression shall be turned off
ICMI (Initial Codec Mode Indicator): 0 The initial codec mode is defined by the implicit rule provided in 3GPP TS 05.09 1 The initial codec mode is defined by the Start Mode field 0 Spare Start Mode: The initial codec mode is coded as in 3GPP TS 05.09 section 3.4.1 Parameters for multirate speech : 1) Parameters for multirate speech field for the MR version 1 when a set with one codec mode is chosen 8 7 6 5 4 3 2 1 octet x xx
2) Parameters for multirate speech field for the MR version 1 when a set with two codec modes is chosen 8 7 6 5 4 3 2 1 octet x octet x+1 Spare Hysteresis 1 0 0 0 0 octet x+2
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 178/218 178
MCD
3) Parameters for multirate speech field for the MR version 1 when a set of three codec modes is chosen
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
4) Parameters for multirate speech field for the MR version 1 when a set of four modes is chosen 8 7 6 5 4 3 2 1 octet x octet x+1 octet x+2 octet x+3 Hysteresis 3 octet x+4
Set of adaptive multirate codec modes field Bit 8 0 1 Bit 7 0 1 Bit 6 0 1 Bit 5 0 1 Bit 4 0 1 Bit 3 0 1 Bit 2 0 1 5,15 kbit/s codec rate is not part of the subset; 5,15 kbit/s codec rate is part of the subset; 5,90 kbit/s codec rate is not part of the subset; 5,90 kbit/s codec rate is part of the subset; 6,70 kbit/s codec rate is not part of the subset; 6,70 kbit/s codec rate is part of the subset; 7,40 kbit/s codec rate is not part of the subset; 7,40 kbit/s codec rate is part of the subset; 7,95 kbit/s codec rate is not part of the subset; 7,95 kbit/s codec rate is part of the subset; 10,2 kbit/s codec rate is not part of the subset; 10,2 kbit/s codec rate is part of the subset; 12,2 kbit/s codec rate is not part of the subset; 12,2 kbit/s codec rate is part of the subset;
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 179/218 179
MCD
Bit 1 0 1
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
4,75 kbit/s codec rate is not part of the subset; 4,75 kbit/s codec rate is part of the subset;
Threshold j (6 bits), see Note 1 C/I Coded as the binary representation of a value N. N corresponds to the threshold of in dB, as defined in 3GPP TS 05.09;
Hysteresis j (4 bits), see Note 1 Coded as the binary representation of the hysteresis value associated to THRj, as defined in 3GPP TS 05.09. Note 1: j = 1 corresponds to the lowest value of threshold in dB, j = 2 to the second lowest, j = 3 to the highest value.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED 3BK 11203 0064 DSZZA 180/218 180
MCD
HANDOVER REQUIRED REJECT ABIS A SCCP Connection 08.08 3.2.1.37 This message may be sent by MSC to report that a previously requested handover could not be executed. BSC
FUNCTION
DIRECTION
TYPE
MF MF
1 3
ABNORMAL SITUATION
TIMER
T_HO_ REQ_LOST
(ref. [21])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED REJECT 3BK 11203 0064 DSZZA 181/218 181
MCD
8 0 0 CAUSE 0
7 0 0
6 0 0
5 1 0
4 1 0
3 0 1
2 1 0
1 0 0
Length Cause
6.28.2 CAUSE
TYPE : M DEFINITION : To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
Length 0 Cause
SUB PARAMETER DEFINITION Causes in HANDOVER REQUIRED REJECT are not checked by the BSC. PARAMETER ORIGIN - ACTION ON PARAMETER The BSC does not use nor check the cause value for this message. Only this format (without extension) is expected by the BSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE HANDOVER REQUIRED REJECT 3BK 11203 0064 DSZZA 182/218 182
MCD
MSC INVOKE TRACE ABIS A SCCP Connection 08.08 3.2.1.27 This message is sent from the MSC to the BSC to Request the start of a trace.
FUNCTION
DIRECTION
BSC
TYPE
Message type Trace type TriggerId Trace reference TransactionId Mobile Identity OMCId
MF MF OV MF OF OV OV
ABNORMAL SITUATION
TIMER
Trace Invocation
(ref. [16])
(1)
Not used by the BSC but if received, they are copied to the trace record..
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE MSC INVOKE TRACE 3BK 11203 0064 DSZZA 183/218 183
MCD
7 0 0
6 1 1
5 1 0
4 0 0
3 1 1
2 1 0
1 0 1
Trace Reference
TransactionId
optional
MobileId
optional
OMCId
optional
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE MSC INVOKE TRACE 3BK 11203 0064 DSZZA 184/218 184
MCD
Invok. event
This IE is compliant with 3GPP TS 12.08. SUB PARAMETER DEFINITION Trace type pi (priority indication) : 0 1 00 01 10 11 00 01 10 11 00 01 10 11 no priority priority basic handover radio no BSS trace basic detailed spare no MSC trace MOC, MTC, SMS_MO, SMS_MT, SS, Location updates, IMSI attach/detach MOC, MTC, SMS_MO, SMS_MT, SS Location updates, IMSI attach/detach operator definable
Invoke event
PARAMETER ORIGIN - ACTION ON PARAMETER Bit 'pi' is only used : when set to 1, a priority indication is given to the OMC-R when the trace record is completed.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE MSC INVOKE TRACE 3BK 11203 0064 DSZZA 185/218 185
MCD
6.29.3 TRIGGERID
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : O DEFINITION A variable length element indicating the identity of the entity which initiated the trace. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 0 3 1 2 1 1 0 Octet 1 2 3-22
Length Entity identity SUB PARAMETER DEFINITION PARAMETER ORIGIN - ACTION ON PARAMETER None.
Trace Reference SUB PARAMETER DEFINITION A fixed length trace reference number allocated by the triggering entity. PARAMETER ORIGIN - ACTION ON PARAMETER None.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE MSC INVOKE TRACE 3BK 11203 0064 DSZZA 186/218 186
MCD
6.29.5 TRANSACTIONID
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : O DEFINITION A potentially variable length element indicating a particular transaction within a trace. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 1 3 0 2 0 1 0 Octet 1 2 3-4
Octet 3-n contain either the IMSI or IMEI as coded in 3GPP TS 24.008, not including the element identifier or the length value. PARAMETER ORIGIN - ACTION ON PARAMETER None.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE MSC INVOKE TRACE 3BK 11203 0064 DSZZA 187/218 187
MCD
6.29.7 OMCID
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : O DEFINITION A variable length element indicating the destination OMC to which trace information is to be sent. BIT DESCRIPTION 8 0 7 0 6 1 5 0 4 1 3 0 2 1 1 0 Octet 1 2 3-22
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE MSC INVOKE TRACE 3BK 11203 0064 DSZZA 188/218 188
MCD
6.30 OVERLOAD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
OVERLOAD (A Interface) ABIS A SCCP Connectionless 08.08 3.2.1.26 This message is sent from the MSC to BSS or from BSS to MSC to report an Overload situation at the message sender.
FUNCTION
DIRECTION
BSC
TYPE
MF MF OV
1 3 not used
ABNORMAL SITUATION
Overload Control
(ref. [14])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE OVERLOAD 3BK 11203 0064 DSZZA 189/218 189
MCD
8 0 0 Cause 0
7 0 0
6 1 0
5 1 0
4 0 0
3 0 1
2 1 0
1 0 0
6.30.2 CAUSE
TYPE : M DEFINITION To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
Length 0 SUB PARAMETER DEFINITION Used cause values in the BSC to MSC direction : Class 010 : Resource unavailable - Processor overload PARAMETER ORIGIN - ACTION ON PARAMETER Only this format without extension is used or expected. In the MSC->BSS direction, the BSS does not use or check the cause values. Cause value
010
0100
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE OVERLOAD 3BK 11203 0064 DSZZA 190/218 190
MCD
6.31 PAGING
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
PAGING ABIS A SCCP Connection 08.08 3.2.1.19 This message is sent from MSC to BSC and contains sufficient information to allow the paging message to be transmitted at the correct time
FUNCTION
DIRECTION
BSC
TYPE
Message type MF IMSI MV TMSI OF Cell Identifier List MV Channel needed OF eMLPP Priority OF IMPLEMENTATION MAXIMUM LENGTH
ABNORMAL SITUATION
(ref. [1])
(*) n is the number of cells (1) (2) (3) If the cell identifier is not present, incorrect then paging will be sent on all cells of the BSC. If this IE is missing , it is not treated as an error in this release. Not supported. This IE is ignored by the BSS when received.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE PAGING 3BK 11203 0064 DSZZA 191/218 191
MCD
8 0 0
7 1 0
6 0 0
5 1 0
4 0 1
3 0 0
2 1 0
1 0 0
Id digit 2 .. ..
Id digit p+1 0 0 0 0 1
Id digit P 0 0 1
Length (value = 4) TMSI TMSI value TMSI value contd. TMSI value contd. TMSI value contd. 0 0 0 1 1 0 1 0 optional
Length Cell Identifier List Cell Identif.Discriminator Cell 1, format depends on Cell Id Discriminator 2 to 7 octets. .. .. .. ..
Cell P, format depends on Cell Id Discriminator 2 to 7 octets. eMLPP Priority 0 0 1 spare 1 1 0 0 Call priority 0 optional
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE PAGING 3BK 11203 0064 DSZZA 192/218 192
MCD
6.31.2 IMSI
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : M DEFINITION Value of IMSI BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 1 3 0 2 0 1 0 1 2 Type of Id Id digit 2 ... ... N 3 4
Id digit p+1 with p <= 15. SUB PARAMETER DEFINITION Type of Id : OEI value 001 IMSI in octet 3
Id digit p
Odd Even Indicator 0 1 : even number of identity digits (even for TMSI) : odd number of digits
Filled digits 1 1 1 1 for non used nibble PARAMETER ORIGIN - ACTION ON PARAMETER The digit are numerical (0 through 9) (Digit 1 is the most significant) e.g. IMSI = 186543 0 0 0 0 1 0 0 0 1 2 0 0 1 0 0 0 0 1 1 0 1 1 3 4 5 6
Length 0 0 0 1 0 1 1 1 0 1 0 1 1 0 0 1 0 1 0 0
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE PAGING 3BK 11203 0064 DSZZA 193/218 193
MCD
6.31.3 TMSI
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
Length (value = 4) TMSI value TMSI value contd. TMSI value contd. TMSI value contd. SUB PARAMETER DEFINITION
Bit 8 of octet 3 is the most significant bit, and bit 1 of octet 6 is the least significant bit. PARAMETER ORIGIN - ACTION ON PARAMETER If the length of TMSI is less 4 octets, the MSC should fill the field with zeroes in front of the MSB.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE PAGING 3BK 11203 0064 DSZZA 194/218 194
MCD
TYPE : M DEFINITION Identifies a list of cells within a BSS. Let P be the number of cells in the list. BIT DESCRIPTION 8 0 7 0 6 0 5 1 4 1 3 0 2 1 1 0 1 2 Cell Identif.Discriminator 3 4
Length spare
Cell P, format depends on Cell Id Discriminator 2 to 7 octets. SUB PARAMETER DEFINITION Cell identification discriminator (0) (1) (2) (3) (4) (5) (6) (8) (9) (10) (11) 0000 0001 0010 0011 0100 0101 0110 1000 1001 1010 1011 The whole cell global Identification, CGI Location Area Code, LAC, and Cell Identity, CI Cell Identity, CI, No cell is associated with the transaction Location Area Identification, LAI Location Area Code, LAC. All cells of the BSS. PLMN-ID, LAC and RNC-ID RNC-ID LAC and RNC-ID SAI of UE (Serving Area Identity)
All other values are reserved. Detailed layout depending on discriminator values is provided in next pages.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE PAGING 3BK 11203 0064 DSZZA 195/218 195
MCD
Octets 4 to N: CELL 1 MCC digit 2 MNC digit 3 (Note) MNC digit 2 LAC LAC cont. CI value CI value cont. CELL P MCC digit 2 MNC digit 3 (Note) MNC digit 2 LAC LAC cont. CI value CI value cont. MCC digit 1 MCC digit 3 MNC digit 1 N-6 N-5 N-4 N-3 N-2 N-1 N MCC digit 1 MCC digit 3 MNC digit 1 4 5 6 7 8 9 10
Note
3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
Cell identification discriminator = 1 Length = 1 + 4 x P Octets 4 to N: CELL 1 LAC LAC cont. CI value CI value cont. CELL P LAC LAC cont. CI value CI value cont. N-3 N-2 N-1 N 4 5 6 7
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE PAGING 3BK 11203 0064 DSZZA 196/218 196
MCD
Octets 4 to N: CELL 1 CI value CI value cont. CELL P CI value CI value cont. Cell identification discriminator = 3 Length = 1 Octets 4 to N: NONE N-1 N 4 5
Cell identification discriminator = 4 Length = 1 + 5 x P Octets 4 to N: CELL 1 MCC digit 2 MNC digit 3 (Note) MNC digit 2 LAC LAC cont. CELL P MCC digit 2 MNC digit 3 (Note) MNC digit 2 LAC LAC cont. MCC digit 1 MCC digit 3 MNC digit 1 N-4 N-3 N-2 N-1 N MCC digit 1 MCC digit 3 MNC digit 1 4 5 6 7 8
Note
3 digits MNC is supported. Note that in case where only two digits MNC is used, the field MNC digit 3 shall be filled in with 1111.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE PAGING 3BK 11203 0064 DSZZA 197/218 197
MCD
Octets 4 to N: CELL 1 LAC LAC cont. CELL P LAC LAC cont. Cell identification discriminator = 6 Length = 1 Octets 4 to N: NONE N-1 N 4 5
MCC, MNC : See 3GPP TS 24.008 LAC, Location area code : See 3GPP TS 24.008. CI value, Cell Identity value : See 3GPP TS 24.008. PARAMETER ORIGIN - ACTION ON PARAMETER Values (1,4,5,6) are accepted by the BSS. Values (2,3) should not be used by the MSC: value (3) does not make sense for paging, and value (2) is not sufficient information. However, in those two last cases paging will be done to all cells of the BSS.
5 1
4 1
3 0
2 0 Call priority
1 0 1 2
no priority applied call priority level 4 call priority level 3 LAYER 3 MESSAGE DICTIONARY - A INTERFACE PAGING 3BK 11203 0064 DSZZA 198/218 198
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
priority level priority level priority level priority level priority level
2 1 0 B A
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE PAGING 3BK 11203 0064 DSZZA 199/218 199
MCD
QUEUING INDICATION ABIS A SCCP Connection 08.08 3.2.1.33 This message is sent from the BSC to the MSC in order to indicate a delay in the assignment of the required TCH.
FUNCTION
DIRECTION
BSC
TYPE
Message type
MF
ABNORMAL SITUATION
TIMER
T11 Tqho
(ref. [13])
One of the above timers is started when the message is sent from the BSC to the MSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE QUEUING INDICATION 3BK 11203 0064 DSZZA 200/218 200
MCD
6.33 RESET
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
RESET ABIS A SCCP Connectionless 08.08 3.2.1.23 This message indicates to the receiving entity that the transmitting entity has suffered a failure and has lost memory of the call in progress, call set up and associated references.
FUNCTION
DIRECTION
BSC
TYPE
MF MF
1 3
NORMAL SITUATION FOLLOWING EVENT Reset Acknowledge sent by the entity that has received Reset.
ABNORMAL SITUATION
T4 is started in the BSC. T16 is started at the MSC. T13 is the reset guard period at the BSS. T2 is the reset guard period at the MSC.
The sending of this message by the BSC is enabled/disabled by the O&M parameter RESET_TO_MSC/NBR_RESET_REP
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE RESET 3BK 11203 0064 DSZZA 201/218 201
MCD
8 0 0 Cause 0
7 0 0
6 1 0
5 1 0
4 0 0
3 0 1
2 0 0
1 0 0
6.33.2 CAUSE
TYPE : M DEFINITION To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
Length 0 SUB PARAMETER DEFINITION Used cause values in the BSC to MSC direction : Class 110 : Protocol error - Protocol error between BSC and MSC PARAMETER ORIGIN - ACTION ON PARAMETER The MSC or BSC gives in this parameter the reason of the Reset. In the MSC -> BSS direction, the BSS does not use or check the cause values. Cause value
110
0000
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE RESET 3BK 11203 0064 DSZZA 202/218 202
MCD
RESET ACKNOWLEDGE ABIS A SCCP Connectionless 08.08 3.2.1.24 This message can be sent either from the MSC to the BSC or from the BSC to the MSC. It indicates to the receiving entity that the transmitting entity has cleared all calls and reset all references and is ready to resume service.
FUNCTION
DIRECTION
BSC
TYPE
Message type
MF
ABNORMAL SITUATION
T4 is started in the BSC. T16 is started at the MSC. T13 is the reset guard period at the BSS. T2 is the reset guard period at the MSC.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE RESET ACKNOWLEDGE 3BK 11203 0064 DSZZA 203/218 203
MCD
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
MCD
0064_04.DOC 31/05/02
FUNCTION
SCCP Connectionless 08.08 3.2.1.38 This message is sent from the BSS to the MSC or from the MSC to the BSS to indicate that a circuit and its associated reference should be reinitialised, due to some abnormal event.
DIRECTION
BSC
TYPE
MF MF MF
1 3 3 7
(ref. [19])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE RESET CIRCUIT 3BK 11203 0064 DSZZA 205/218 205
MCD
7 0 0
6 1 0
5 1 0
4 0 0
3 1 0
2 0 0
1 0 1
PCM multiplex in use (high part) (low part) SUB PARAMETER DEFINITION PCM Multiplex TS in use defines the terrestrial channel TS in use
PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is given to the MSC or to the BSC in order to identify a specific terrestrial channel.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE RESET CIRCUIT 3BK 11203 0064 DSZZA 206/218 206
MCD
6.35.3 CAUSE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : M DEFINITION To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
Length 0 SUB PARAMETER DEFINITION Used causes : BSC to MSC: Class 110 : Protocol error - Protocol error between BSC and MSC MSC to BSC: Any cause is accepted by the BSC PARAMETER ORIGIN - ACTION ON PARAMETER Only this format is used (no extension). Cause value
110
0000
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE RESET CIRCUIT 3BK 11203 0064 DSZZA 207/218 207
MCD
RESET CIRCUIT ACKNOWLEDGE ABIS A SCCP Connectionless 08.08 3.2.1.39 This message is sent from the MSC to the BSC to acknowledge the receipt of an earlier RESET CIRCUIT and to indicate that the circuit concerned has been reinitialised.
FUNCTION
DIRECTION
BSC
TYPE
MF MF
1 3 4
ABNORMAL SITUATION
(ref. [19])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE RESET CIRCUIT ACKNOWLEDGE 3BK 11203 0064 DSZZA 208/218 208
MCD
7 0 0
6 1 0
5 1 0
4 0 0
3 1 0
2 0 0
1 1 1
PCM multiplex in use (high part) (low part) SUB PARAMETER DEFINITION PCM Multiplex TS in use defines the terrestrial channel TS in use
PARAMETER ORIGIN - ACTION ON PARAMETER This parameter is given to the BSC or MSC in order to identify a specific terrestrial channel.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE RESET CIRCUIT ACKNOWLEDGE 3BK 11203 0064 DSZZA 209/218 209
MCD
SAPI "n" REJECT ABIS A SCCP Connection 08.08 3.2.1.34 The message is sent from the BSC to the MSC in order to indicate that a message with a SAPI value other than 0 has been rejected.
FUNCTION
DIRECTION
BSC
TYPE
MF MF MF
1 2 3 6
ABNORMAL SITUATION
TIMER
(ref. [9])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE SAPI "n" REJECT 3BK 11203 0064 DSZZA 210/218 210
MCD
7 0 0
6 1 0 0
5 0 1 0 0
4 0 1 0 0
3 1 0
2 0 0 SAPI
1 1 0
6.37.2 DLCI
TYPE : M DEFINITION This is a fixed length element indicating the channel on which the SAPI value over the air interface that the transaction concerns. BIT DESCRIPTION 8 0 Spare 7 0 6 0 0 5 1 0 4 1 0 3 0 2 0 SAPI 1 0
SUB PARAMETER DEFINITION Bit 8,7 Spare set to 0. SAPI values Bit 1,2,3. 0 Call control signalling, mobility management signalling and radio resource management signalling. 3 Short message service. All others reserved for future standardisation.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE SAPI "n" REJECT 3BK 11203 0064 DSZZA 211/218 211
MCD
6.37.3 CAUSE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
TYPE : M DEFINITION To indicate the reason for a particular event to have occurred. BIT DESCRIPTION 8 0 7 0 6 0 5 0 4 0 3 1 2 0 1 0
Length 0 SUB PARAMETER DEFINITION Used causes : 765 Class 000 : Normal event - Radio Interface failure Class 010 : Resource unavailable - BSS not equipped Class 110 : Protocol error - Protocol error between BSC and MSC PARAMETER ORIGIN - ACTION ON PARAMETER Only this format (without extension) is used. 000 010 110 4321 0001 0101 0000 Cause Value
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE SAPI "n" REJECT 3BK 11203 0064 DSZZA 212/218 212
MCD
This is a specific phase 1 message. NAME INTERFACE CHANNEL/ USAGE 3GPP-REF AIR TRACE INVOCATION ABIS A SCCP Connection 08.08 (Phase 1 only) 3.2.1.27 This message is sent from a GSM phase 1 MSC to the BSC to Request the start of a trace. BSC
FUNCTION
DIRECTION
TYPE
MF MF
1 3
ABNORMAL SITUATION
TIMER
Trace Invocation
(ref. [16])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE TRACE INVOCATION 3BK 11203 0064 DSZZA 213/218 213
MCD
8 0 0 Trace Number
7 0 0
6 1 0
5 1 1
4 0 0
3 0 1
2 1 1
1 1 0
Trace number Trace number (continued) SUB PARAMETER DEFINITION This is a 16 bits binary reference number.
PARAMETER ORIGIN - ACTION ON PARAMETER Used inside the receiving entity to create a unique trace record identifier.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE TRACE INVOCATION 3BK 11203 0064 DSZZA 214/218 214
MCD
6.39 UNBLOCK
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
UNBLOCK ABIS A SCCP Connectionless 08.08 3.2.1.6 This message is sent from the BSC to the MSC to indicate that a particular terrestrial resource (i.e. a particular timeslot within a 2Mbit system) may be returned to service at the MSC and can therefore be used for traffic.
FUNCTION
DIRECTION
BSC
TYPE
MF MF
1 3
NORMAL SITUATION FOLLOWING EVENT Unblocking Acknowledge sent by the entity which has received Unblock message
ABNORMAL SITUATION
TIMER T1_short
(ref. [19])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE UNBLOCK 3BK 11203 0064 DSZZA 215/218 215
MCD
7 1 0
6 0 0
5 0 0
4 0 0
3 0 0
2 1 0
1 0 1
PCM multiplex in use (high part) (low part) SUB PARAMETER DEFINITION PCM Multiplex TS in use defines the terrestrial channel TS in use
PARAMETER ORIGIN - ACTION ON PARAMETER The BSC gives to the MSC the Identification of the terrestrial channel which becomes available.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE UNBLOCK 3BK 11203 0064 DSZZA 216/218 216
MCD
UNBLOCKING ACKNOWLEDGE ABIS A SCCP Connectionless 08.08 3.2.1.7 This message is sent from the MSC to the BSC to acknowledge the receipt of an earlier unblock message, and to indicate that the circuit concerned has been returned to service.
FUNCTION
BSC
To : BSC TYPE
MSC
COMMENT
LENGTH
MF MF
1 3
ABNORMAL SITUATION
TIMER
(ref. [19])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE UNBLOCKING ACKNOWLEDGE 3BK 11203 0064 DSZZA 217/218 217
MCD
7 1 0
6 0 0
5 0 0
4 0 0
3 0 0
2 1 0
1 1 1
PCM multiplex in use (high part) (low part) SUB PARAMETER DEFINITION PCM Multiplex TS in use defines the terrestrial channel TS in use
PARAMETER ORIGIN - ACTION ON PARAMETER The MSC gives to the BSC the Identification of the terrestrial channel which becomes available.
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE UNBLOCKING ACKNOWLEDGE 3BK 11203 0064 DSZZA 218/218 218
MCD
UNEQUIPPED CIRCUIT ABIS A SCCP Connection 08.08 3.2.1.47 This message is sent from the BSS to the MSC or vice versa to indicate to the partner entity that it is using one or several circuit identity codes which are unknown and which therefore should be locally blocked immediately and taken out of service. This message is sent as a connectionless SCCP message. BSC
FUNCTION
DIRECTION
TYPE
MF MF OV
not used
1 3 4-45 4
ABNORMAL SITUATION
TIMER
(ref. [19])
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE UNEQUIPPED CIRCUIT 3BK 11203 0064 DSZZA 219/218 219
MCD
7 1 0
6 0 0
5 0 0
4 1 0
3 0 0
2 0 0
1 0 1
PCM multiplex in use (high part) (low part) SUB PARAMETER DEFINITION PCM Multiplex TS in use defines the terrestrial channel TS in use
ED
04
Released
0064_04.DOC 31/05/02
LAYER 3 MESSAGE DICTIONARY - A INTERFACE UNEQUIPPED CIRCUIT 3BK 11203 0064 DSZZA 220/218 220
MCD
7. GLOSSARY
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel
3GPP AGCH AMR ARFCN BA BCCH BSC BSS BTS CCCH CHAN. CND FN FR FU HR IE IEI LA ME MS MSC NA OIE PCH RACH RX SACCH SCCP SCH SDCCH SMSCB SoLSA TCH TS
3rd Generation Partnership Project Access Grant CHannel Adaptive MultiRate codec Absolute Radio Frequency Channel Number BCCH Allocation Broadcast Control CHannel Base Station Controller Base Station Subsystem (BSC+n*BTS) Base Transceiver Station Common Control CHannel Channel Configuration Data Frame Number Full Rate Frame Unit Half Rate Information Element Information Element Identifier Location Area Mobile Equipment Mobile Station Mobile Switching Centre Not Applicable Optional Information Element Paging CHannel Random Access CHannel Receiver Slow Associated Control CHannel Signalling Connection Control Part Synchronisation CHannel Stand alone Dedicated Control CHannel Short Message Service Cell Broadcast Support of Localised Service Area Traffic Channel Time Slot END OF DOCUMENT
MCD
221/218 221