Professional Documents
Culture Documents
Airlive Wl-8064Arm: Quick Setup Guide
Airlive Wl-8064Arm: Quick Setup Guide
Airlive Wl-8064Arm: Quick Setup Guide
English
English
Basic Installation
1.1 Back Panel:
The back panel of the WL-8064ARM 108Mbps Wireless ADSL 2/2+ Modem
Router contains ADSL, Ethernet Switches, Reset Button, Power Adaptor
connection and SMA Connector.
English
English
RESET Button :
! Reboot & Restore the 4 Ports 11g Wireless ADSL Router’s
setting to factory defaults.
To Reset the WL-8064ARM Wireless ADSL2/2+ Modem Router:
" Ensure that the device is powered on.
" Press the Reset button for 10~15 seconds and release. “WL ACT”
LED indicators will turns OFF and ON again indicates that the reset is
in progress. Do not power off the device during the reset process.
" Reset is completed when the “WL ACT” LED indicator return to
steady green. The default settings are now restored.
English
English
English
English
English
English
1 1
2
1 1
Windows 2000
Step 1: Click Start → Settings →
Control Panel.
English
English
1
2
2
Windows xp
Step 1: Click Start→Control
Panel→Classic View.
English
English
Properties.
1 2
2
3
English
English
easily.
Step 1. Select your country from the list and your ISP name(if available).
The router will automatically select the correct encapsulation and
VPI/VCI parameters.
English
English
Step 2. After you select the correct country and ISP. The router will
automatically determine if your ISP use method A or method B for
ADSL connection.
A. If your ISP provides you with username and password. The router
will ask you to enter those information. Please enter the correct
username and password provided by your ISP. Afterward, press
Apply to continue. If your ISP use this method, please ignore
method B completely and go straight to Step 3
B. If your ISP use 1483 Bridged or Routed mode (use mostly for fixed IP
connection), the router will pop up the following screen after clicking
the “NEXT” button from STEP 1,
English
English
Click to enable the “Default Gateway” then click “Apply” after your
setting. Refer to your ISP for further details on the correct setting.
III. Bridge: Click the radio button to enable DHCP (Get IP dynamically
from ISP) option, then click “Next”. The following screen will
pop-up:
Click and choose “Select LAN” from the dropdown manual or leave it as
it’s default then click “Apply” after your setting. Refer to your ISP for
further details on the correct setting.
English
English
The device’s system will reboot and activate your setting after clicking the
“Apply” button.
English
English