Professional Documents
Culture Documents
Accesorios Transportadores
Accesorios Transportadores
Accesorios Transportadores
or
Solus manufactures components for virtually every part of a conveyor. Our parts
have been performing in factories, facilities, and plants for decades. Solus rails,
chains, and support components are excellent solutions for those areas where
containers have trouble moving smoothly and tend to crowd together or jam.
866-765-8744
S o l u s i i
www.solusii.com
solusteam@solusii.com
Conveyor Chains......................... 2
Stainless or Carbon Steel Flat Top Chains
Straight Running Chains Side Flexing Chains
Multi-flex Chains
Gripper Chains
Plate Top Chains
Crate Conveyor Chains
Great news! The selection of products available from Solus is greater than ever. Solus
is the single source for all of your conveyor
needs. Our family of products include:
Components
and Accessories
Conveyor Chains
and Sprockets
Wear Strips
ValuFlex
Return Rollers
Mounted Bearings
& Accessories ........................... 139
2,3 and 4 Hole Flange Bearings Stainless or Chrome Inserts
Ribbed or Solid Housings Covers & Seals Pillow Blocks
Nolu Clean, antimicrobial white bearings
Components
and Accessories
Materials and
Products
Office Locations
30152 Aventura Rancho Santa Margarita, California 92688
phone: (949) 589-3900 fax: (949) 858-0300
Sanford,
North Carolina
Aston,
Pennsylvania
Indianapolis,
Indiana
Customer Service
Toll free phone:
(866) 765-8744
S o l u s i i
Literature
Request
fax: (866)
447-6587
4 4 S o l u s
www.solusii.com
e-mail: solusteam@solusii.com
Copyright 2005 Solus Industrial Innovations, LLC
All Rights Reserved.
This catalog presents the latest generation of products, and supersedes information shown in earlier catalogs. This catalog relates to
current production at the time of printing. Other information, which may
be different from that contained in this publication, must be considered
invalid. The right is reserved to carry out modifications rendered
necessary by the technical development of Solus products.
The contents of this catalog are the copyright of the publisher and
may not be reproduced (even extracts) unless permission is granted.
Every care has been taken to ensure the accuracy of the information contained in this catalog, but no liability can be accepted for
any errors or omissions.
The information given here is believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to
its accuracy or suitability for particular applications or the results to
be obtained therefrom. The information is based on laboratory work
with small-scale equipment on small samplings of stock material and
particular conditions of use and reasonable lot-to-lot variations can
affect performance. Users of our products should make their own
tests to determine the suitability of any product for their particular
purposes. The products discussed in this catalog are warranted to be
free of any defect in material or workmanship when delivered, but are
otherwise SOLD WITHOUT WARRANTY, EITHER EXPRESSED OR
IMPLIED, INCLUDING ANY WARRANTY OR MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. Buyer assumes
responsibility for loss or damages arising from the use of our products, whether used in accordance with our direction or not, and we
shall in no event be liable for incidental or consequential damages.
Our sole responsibility shall be to replace any product proved to be
defective when delivered. Statements concerning the possible uses
of our products are not intended as recommendations to use our
products in the infringement of any patent. The research efforts to
better the quality and function or our products permit us to change
and replace, without notice, the specifications in this catalog.
Straight Running
Plastic Chains
Straight Running
Steel Chains
812,
815 series
. . . . . . . . . . . . . . . . . . . . . . . . . . page 16
820 series
. . . . . . . . . . . . . . . . . . . . . . . . . . . . page
821 series
. . . . . . . . . . . . . . . . . . . . . . . . . page
22 815
Speed-Line series
. . . . . . . . . . . . . . . . . . . . . . . . . . . . page
828 series
. . . . . . . . . . . . . . . . . . . . . . . . . page
Side Flexing
Steel Chains
20
LBP
821 series
. . . . . . . . . . . . . . . . . . . . . . . . . page
LBP
831 series
. . . . . . . . . . . . . . . . . . . . . . . . . page
LBP
2120 series
. . . . . . . . . . . . . . . . . . . . . . . . . page
831 series
. . . . . . . . . . . . . . . . . . . . . . . . . page
series
18 881
.........................
Side Flexing
Plastic Chains
878
TAB series
. . . . . . . . . . . . . . . . . . . . . . . . . page
879,
880 series
. . . . . . . . . . . . . . . . . . . . . . . . . page
879 TAB,
880 TAB series
. . . . . . . . . . . . . . . . . . . . . . . . . page
882 series
. . . . . . . . . . . . . . . . . . . . . . . . . page
882
TAB series
. . . . . . . . . . . . . . . . . . . . . . . . . page
page
10
. . . . . . . . . . . . . . . . . . . . . . . . . page
10
881O series
24 881
TAB series
26 881O
TAB series
30
32
881M,
881MO series
. . . . . . . . . . . . . . . . . . . . . . . . . page
881 MO
Speed-Line series
Side exing steel chains . . . . . . page
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
LBP 878
TAB series
LBP 882
TAB series
. . . . . . . . . . . . . . . . . . . . . . . . . page
. . . . . . . . . . . . . . . . . . . . . . . . . page
28
12
58
68
. . . . . . . . . . . . . . . . . . . . . . . . . page
. . . . . . . . . . . . . . . . . . . . . . . . . page
56
66
60
12
14
14
. . . . . . . . . . . . . . . . . . . . . . . . . page
64
Conveyor
Chains
878
TAB VG series
. . . . . . . . . . . . . . . . . . . . . . . . . page
879
TAB VG series
. . . . . . . . . . . . . . . . . . . . . . . . . page
34
Straight Running
Plate Top Chains
36
843 series
. . . . . . . . . . . . . . . . . . . . . . . . . page
882
TAB VG series
. . . . . . . . . . . . . . . . . . . . . . . . . page
44
. . . . . . . . . . . . . . . . . . . . . . . . . page
38 863 series
. . . . . . . . . . . . . . . . . . . . . . . . . page
45
Side Flexing
Plate Top Chains
. . . . . . . . . . . . . . . . . . . . . . . . . page
50
. . . . . . . . . . . . . . . . . . . . . . . . . page
50
page
1843 series
1863 series
. . . . . . . . . . . . . . . . . . . . . . . . . page
46
CC 600 series
47
CC 600
TAB series
. . . . . . . . . . . . . . . . . . . . . . . . . page
. . . . . . . . . . . . . . . . . . . . . . . . . page
1701
TAB series
. . . . . . . . . . . . . . . . . . . . . . . . . page
1873 series
52
. . . . . . . . . . . . . . . . . . . . . . . . . page
48
CC 1400 series
. . . . . . . . . . . . . . . . . . . . . . . . . page
1701
TAB OP series
. . . . . . . . . . . . . . . . . . . . . . . . . page
CC 1400
TAB series
52
. . . . . . . . . . . . . . . . . . . . . . . . . page
40
42
. . . . . . . . . . . . . . . . . . . . . . . . . page
1702 series
1873 GS series
...............
Multiex Chain
1700 series
878
TAB GS series
54
54
55
55
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Chains
C45
Material name:
hardened carbon steel
This carbon steel material allows a higher yield load capability than stainless steel but is not corrosion
resistant. The hardened plate material provides for a uniform hardness of 44 HRC.
Features:
Surface hardness: 44 HRC
Benets:
High mechanical strength
High abrasion resistance
Standard
Extra Plus
Austenitic
Stainless Steel
Material name: 304 grade
AISI 304 Austenitic stainless steel which offers exceptionally high corrosion and acid resistance properties
Features:
Non magnetic stainless steel
18% chrome and 8% nickel
Benets:
High corrosion and acid resistance material
Symbol
C45
Standard
Extra Plus
Austic
Minimum
Temp. F
- 94
- 22
- 22
- 22
Max. Temp. F
Dry Environment
+ 356
+ 752
+ 752
+ 752
Other materials are available. See the complete Flexon System Plast conveyor chain catalog for details.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Material name:
Low Friction Acetal Resin
It is identical to the delrin acetal material and offers an improved co-efcient of friction. This material is suitable
for use in high speed applications.
Operating temperatures:
dry: - 40F to + 176F
wet: 32F to +149F
Color: Light Brown, Dark Grey or White
This material is FDA (Food and Drug Administration) approved for direct contact with food.
XP
Material name:
Extra Performance
Extra performance acetal with a very low co-efcient of friction compared to other LF materials. Suitable for high
speed applications and reduced lubrication. Equivalent to other manufacturer's high performance materials.
Operating temperatures:
dry: - 40F to + 176F
wet: 32F to +149F
Color: Dark Grey
This material is FDA (Food and Drug Administration) approved for direct contact with food.
NG
New Generation
Material name:
Extra performance PBT with the lowest coefcient of friction in our range, resulting in medium strength and optimum wear resistance, along with reduced plate wear and reduced pitch elongation. Suitable for high speed and
dry running applications. NG material is available in at top chain exclusively from Flexon-System Plast .
Operating temperatures:
up to 248F
Color: Green or Dark Grey
Symbol
D,W
LF, LFW
XP
NG
Minimum
Temp. F
- 40
- 40
- 40
- 40
Max. Temp. F
Dry Environment
+ 176
+ 176
+ 176
+ 248
Other materials are available. See the complete Flexon System Plast conveyor chain catalog for details.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Chains
RD
.39
.26
812, 815
.12
1.50
1.66
1.50
1.73
.25
Conveyor Chains
TRAVEL
Material: "C 45" Hardened carbon steel.
Chain Reference
S 815 K325
S 815 K400
S 815 K450
S 815 K600
S 815 K750
Part Number
Yield
Point (lbs.)
Surface Finish
(micro inches)
L (width)
RD
Weight
(lbs. per ft.)
10302
10304
10305
10306
10307
2696
2696
2696
2696
2696
3-1/4
4
4-1/2
6
7-1/2
.07
.07
.07
.07
.07
5.91
5.91
5.91
5.91
5.91
1.74
2.01
2.21
2.81
3.42
Part Number
Yield
Point (lbs.)
Surface Finish
(micro inches)
L (width)
RD
Weight
(lbs. per ft.)
SS 812 K325
SSR 812 K325
SS 812 K330
SS 812 K350
SS 812 K400
SS 812 K450
SS 812 K600
SS 812 K750
10001
10007
10034
10002
10003
10004
10005
10006
1214
1214
1214
1214
1214
1214
1214
1214
24
24
24
24
24
24
24
24
3-1/4
3-1/4
3-19/64
3-1/2
4
4-1/2
6
7-1/2
.07
.11
07
07
07
07
07
07
5.91
2.95
5.91
5.91
5.91
5.91
5.91
5.91
1.74
1.68
1.74
1.81
2.01
2.21
2.81
3.42
Material: Special 400 series "Extra Plus" high performance stainless steel.
Chain Reference
Part Number
Yield
Point (lbs.)
Surface Finish
(micro inches)
L (width)
RD
Weight
(lbs. per ft.)
10009
10011
10012
10013
10014
1911
1911
1911
1911
1911
12
12
12
12
12
3-1/4
4
4-1/2
6
7-1/2
.07
.07
.07
.07
.07
5.91
5.91
5.91
5.91
5.91
1.74
2.01
2.21
2.81
3.42
Part Number
Yield
Point (lbs.)
Surface Finish
(micro inches)
L (width)
RD
Weight
(lbs. per ft.)
10016
10018
10019
10020
10021
1191
1191
1191
1191
1191
12
12
12
12
12
3-1/4
4
4-1/2
6
7-1/2
.07
.07
.07
.07
.07
5.91
5.91
5.91
5.91
5.91
1.74
2.01
2.21
2.81
3.42
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Chains
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
19
19
19
19
19
21
21
21
21
21
23
23
23
23
23
25
25
25
25
25
27
27
27
27
27
Idler Options
for 812 , 815 Chains
Machined
Split
Molded
Split
Machined
Split
Molded
Split
Low-Friction
Molded
Molded
Split
Part Number
Part Number
Part Number
Part Number
Part Number
Part Number
815-19MP-.71
815-19MP-1
815-19MP-1.25
815-19MP-1.44
815-19MP-1.5
815-21MP-.71
815-21MP-1
815-21MP-1.25
815-21MP-1.44
815-21MP-1.5
815-23MP-.71
815-23MP-1
815-23MP-1.25
815-23MP-1.44
815-23MP-1.5
815-25MP-.71
815-25MP-1
815-25MP-1.25
815-25MP-1.44
815-25MP-1.5
815-27MP-.71
815-27MP-1
815-27MP-1.25
815-27MP-1.44
815-27MP-1.5
815-21P-1
815-21P-1.25
815-21P-1.44
815-21P-1.5
815-23P-1
815-23P-1.25
815-23P-1.44
815-23P-1.5
815-25P-1
815-25P-1.25
815-25P-1.44
815-25P-1.5
-
815-19MP-IDL-1
815-19MP-IDL-1.25
815-19MP-IDL-1.44
815-19MP-IDL-1.5
815-21MP-IDL-1
815-21MP-IDL-1.25
815-21MP-IDL-1.44
815-21MP-IDL-1.5
815-23MP-IDL-1
815-23MP-IDL-1.25
815-23MP-IDL-1.44
815-23MP-IDL-1.5
815-25MP-IDL-1
815-25MP-IDL-1.25
815-25MP-IDL-1.44
815-25MP-IDL-1.5
815-27MP-IDL-1
815-27MP-IDL-1.25
815-27MP-IDL-1.44
815-27MP-IDL-1.5
815-21P-IDL-1
815-21P-IDL-1.25
815-21P-IDL-1.44
815-21P-IDL-1.5
815-23P-IDL-1
815-23P-IDL-1.25
815-23P-IDL-1.44
815-23P-IDL-1.5
815-25P-IDL-1
815-25P-IDL-1.25
815-25P-IDL-1.44
815-25P-IDL-1.5
-
815-21LF-IDL-1
815-21LF-IDL-1.25
815-21LF-IDL-1.44
815-21LF-IDL-1.5
815-23LF-IDL-1
815-23LF-IDL-1.25
815-23LF-IDL-1.44
815-23LF-IDL-1.5
815-25LF-IDL-1
815-25LF-IDL-1.25
815-25LF-IDL-1.44
815-25LF-IDL-1.5
-
815-21-IDL-1
815-21-IDL-1.25
815-21-IDL-1.44
815-21-IDL-1.5
815-25-IDL-1
815-25-IDL-1.25
815-25-IDL-1.44
815-25-IDL-1.5
-
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
815 Speed-Line
.39
.26
RD
.12
1.50
1.66
1.50
.25
.06
1.73
Conveyor Chains
TRAVEL
Material: Special 400 series "Extra Plus" high performance stainless steel.
Chain Reference
Part Number
Yield
Point (lbs.)
Surface Finish
(micro inches)
L (width)
RD
Weight
(lbs. per ft.)
10080
10085
1911
1911
12
8
3-1/4
3-1/4
7
7
1.68
1.68
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Chains
Idler Options
for 812 , 815 Chains
Machined
Split
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
Part Number
Part Number
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
815-19MP-.71
815-19MP-1
815-19MP-1.25
815-19MP-1.44
815-19MP-1.5
815-21MP-.71
815-21MP-1
815-21MP-1.25
815-21MP-1.44
815-21MP-1.5
815-23MP-.71
815-23MP-1
815-23MP-1.25
815-23MP-1.44
815-23MP-1.5
815-25MP-.71
815-25MP-1
815-25MP-1.25
815-25MP-1.44
815-25MP-1.5
815-27MP-.71
815-27MP-1
815-27MP-1.25
815-27MP-1.44
815-27MP-1.5
815-21P-1
815-21P-1.25
815-21P-1.44
815-21P-1.5
815-23P-1
815-23P-1.25
815-23P-1.44
815-23P-1.5
815-25P-1
815-25P-1.25
815-25P-1.44
815-25P-1.5
-
815-19MP-IDL-1
815-19MP-IDL-1.25
815-19MP-IDL-1.44
815-19MP-IDL-1.5
815-21MP-IDL-1
815-21MP-IDL-1.25
815-21MP-IDL-1.44
815-21MP-IDL-1.5
815-23MP-IDL-1
815-23MP-IDL-1.25
815-23MP-IDL-1.44
815-23MP-IDL-1.5
815-25MP-IDL-1
815-25MP-IDL-1.25
815-25MP-IDL-1.44
815-25MP-IDL-1.5
815-27MP-IDL-1
815-27MP-IDL-1.25
815-27MP-IDL-1.44
815-27MP-IDL-1.5
815-21P-IDL-1
815-21P-IDL-1.25
815-21P-IDL-1.44
815-21P-IDL-1.5
815-23P-IDL-1
815-23P-IDL-1.25
815-23P-IDL-1.44
815-23P-IDL-1.5
815-25P-IDL-1
815-25P-IDL-1.25
815-25P-IDL-1.44
815-25P-IDL-1.5
-
815-21LF-IDL-1
815-21LF-IDL-1.25
815-21LF-IDL-1.44
815-21LF-IDL-1.5
815-23LF-IDL-1
815-23LF-IDL-1.25
815-23LF-IDL-1.44
815-23LF-IDL-1.5
815-25LF-IDL-1
815-25LF-IDL-1.25
815-25LF-IDL-1.44
815-25LF-IDL-1.5
-
815-21-IDL-1
815-21-IDL-1.25
815-21-IDL-1.44
815-21-IDL-1.5
815-25-IDL-1
815-25-IDL-1.25
815-25-IDL-1.44
815-25-IDL-1.5
-
19
19
19
19
19
21
21
21
21
21
23
23
23
23
23
25
25
25
25
25
27
27
27
27
27
Low-Friction
Molded
Molded
Split
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.39
881
Side Flexing Chains,
Bevel Guides
.26
.12
RD=3.15
SC
.44
1.50
1.50
.25
1.69
R.
TRAVEL
Part Number
Yield
Point (lbs.)
10107
10108
10109
1011
1011
1011
Surface Finish
L
(micro inches) (width)
12
12
12
3-1/4
4-1/2
7-1/2
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
18
24
24
1.75
1.75
1.75
1.63
1.63
1.63
2.01
2.48
3.69
SC
.26
.39
RD=3.15
.12
881O
Side Flexing Chains, Bevel Guides
881O offers a further improvement to the standard
chains series 881. This chain has a smaller gap
between plates and therefore creates a larger
surface area for conveying purposes and improved
product stability.
.44
1.50
1.50
.25
1.69
R.
Conveyor Chains
TRAVEL
Material: Special 400 series "Extra Plus" high performance stainless steel.
Chain Reference
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Part Number
Yield
Point (lbs.)
10400
10401
10402
1574
1574
1574
10
Surface Finish
L
(micro inches) (width)
12
12
12
3-1/4
4-1/2
7-1/2
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
18
24
24
1.75
1.75
1.75
1.63
1.63
1.63
2.01
2.48
3.69
Conveyor Chains
Drive Sprocket
Options
for 881 Chains
Idler Options
for 881 Chains
Machined
Split
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
.71*
19
881-19MP-.71
19
881-19MP-1
881-19MP-IDL-1
1-1/4
19
881-19MP-1.25
881-19MP-IDL-1.25
1-7/16
19
881-19MP-1.44
881-19MP-IDL-1.44
1-1/2
19
881-19MP-1.5
881-19MP-IDL-1.5
.71*
21
881-21MP-.71
21
881-21MP-1
881-21P-1
881-21MP-IDL-1
881-21P-IDL-1
1-1/4
21
881-21MP-1.25
881-21P-1.25
881-21MP-IDL-1.25
881-21P-IDL-1.25
1-7/16
21
881-21MP-1.44
881-21P-1.44
881-21MP-IDL-1.44
881-21P-IDL-1.44
1-1/2
21
881-21MP-1.5
881-21P-1.5
881-21MP-IDL-1.5
881-21P-IDL-1.5
.71*
23
881-23MP-.71
23
881-23MP-1
881-23P-1
881-23MP-IDL-1
881-23P-IDL-1
1-1/4
23
881-23MP-1.25
881-23P-1.25
881-23MP-IDL-1.25
881-23P-IDL-1.25
1-7/16
23
881-23MP-1.44
881-23P-1.44
881-23MP-IDL-1.44
881-23P-IDL-1.44
1-1/2
23
881-23MP-1.5
881-23P-1.5
881-23MP-IDL-1.5
881-23P-IDL-1.5
.71*
25
881-25MP-.71
25
881-25MP-1
881-25P-1
881-25MP-IDL-1
881-25P-IDL-1
1-1/4
25
881-25MP-1.25
881-25P-1.25
881-25MP-IDL-1.25
881-25P-IDL-1.25
1-7/16
25
881-25MP-1.44
881-25P-1.44
881-25MP-IDL-1.44
881-25P-IDL-1.44
1-1/2
25
881-25MP-1.5
881-25P-1.5
881-25MP-IDL-1.5
881-25P-IDL-1.5
.71*
27
881-27MP-.71
27
881-27MP-1
881-27MP-IDL-1
1-1/4
27
881-27MP-1.25
881-27MP-IDL-1.25
1-7/16
27
881-27MP-1.44
1-1/2
27
881-27MP-1.5
Carry
90
diu
s
Le
ng
Carry
th
See all sprockets
and idlers on
pages 86-99
Carry
90
Ra
Le
ng
th
Return
Return
Return
Ra
diu
s
Return
90
Le
ng
th
90
Return
Carry
Return
Return
diu
s Track
Corner
Carry
Straight Track
Ra
Return
diu
s
Track Width
Carry or
Return
Length
(feet)
VT-980-B-S-0325-3
3.75
Carry
VT-980-B-S-0325-6
3.75
Carry
VT-980-B-S-0325-10
3.75
Carry
10
VT-980-R-S-0325-3
3.75
Return
VT-980-R-S-0325-6
3.75
Return
VT-980-R-S-0325-10
3.75
Return
10
VT-980-B-S-0450-3
5.0
Carry
VT-980-B-S-0450-6
5.0
Carry
VT-980-B-S-0450-10
5.0
Carry
10
3
Le
ng Part Number
th
Carry
Ra
881-27MP-IDL-1.44
881-27MP-IDL-1.5
Carry
Part Number
Track Width
Carry or
Return
Radius
(inches)
VT-980-R-S-0450-3
5.0
Return
VT-980-B-18-0325
3.75
Carry
18
VT-980-R-S-0450-6
5.0
Return
VT-980-B-24-0325
3.75
Carry
24
VT-980-R-S-0450-10
5.0
Return
10
VT-980-R-18-0325
3.75
Return
18
VT-981-B-S-0750-3
8.0
Carry
VT-980-R-24-0325
3.75
Return
24
VT-981-B-S-0750-6
8.0
Carry
VT-980-B-24-0450
5.0
Carry
24
VT-981-B-S-0750-10
8.0
Carry
10
VT-980-R-24-0450
5.0
Return
24
VT-981-R-S-0750-3
8.0
Return
VT-981-R-S-0750-6
8.0
Return
VT-981-B-24-0750
8.0
Carry
24
VT-981-R-S-0750-10
8.0
Return
10
VT-981-R-24-0750
8.0
Return
24
11
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.69
.50
.26
881 TAB
.76
.12
RD=3.15
SC
1.50
1.50
.25
2.21
R.
TRAVEL
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
10110
10111
10112
1011
1011
1011
12
12
12
3-1/4
4-1/2
7-1/2
18
24
24
1.81
1.81
1.81
1.77
1.77
1.77
2.01
2.48
3.69
.12
881O TAB
Yield
Point (lbs.)
SC
RD=3.15
1.69
1.50
.26
Part Number
.76
Chain Reference
.50
1.50
.25
2.21
R.
Conveyor Chains
TRAVEL
Material: Special 400 series "Extra Plus" high performance stainless steel.
Chain Reference
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Part Number
Yield
Point (lbs.)
10403
10404
10405
1574
1574
1574
12
Surface Finish
L
(micro inches) (width)
12
12
12
3-1/4
4-1/2
7-1/2
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
18
24
24
1.81
1.81
1.81
1.77
1.77
1.77
2.01
2.48
3.69
Conveyor Chains
Drive Sprocket
Options for
881TAB Chains
Machined
Split
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
19
19
19
19
19
21
21
21
21
21
23
23
23
23
23
25
25
25
25
25
27
27
27
27
27
Idler Options
for 881TAB
Chains
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
881-19MP-.71
881-19MP-1
881-19MP-1.25
881-19MP-1.44
881-19MP-1.5
881-21MP-.71
881-21MP-1
881-21MP-1.25
881-21MP-1.44
881-21MP-1.5
881-23MP-.71
881-23MP-1
881-23MP-1.25
881-23MP-1.44
881-23MP-1.5
881-25MP-.71
881-25MP-1
881-25MP-1.25
881-25MP-1.44
881-25MP-1.5
881-27MP-.71
881-27MP-1
881-27MP-1.25
881-27MP-1.44
881-27MP-1.5
881-21P-1
881-21P-1.25
881-21P-1.44
881-21P-1.5
881-23P-1
881-23P-1.25
881-23P-1.44
881-23P-1.5
881-25P-1
881-25P-1.25
881-25P-1.44
881-25P-1.5
-
881-19MP-IDL-1
881-19MP-IDL-1.25
881-19MP-IDL-1.44
881-19MP-IDL-1.5
881-21MP-IDL-1
881-21MP-IDL-1.25
881-21MP-IDL-1.44
881-21MP-IDL-1.5
881-23MP-IDL-1
881-23MP-IDL-1.25
881-23MP-IDL-1.44
881-23MP-IDL-1.5
881-25MP-IDL-1
881-25MP-IDL-1.25
881-25MP-IDL-1.44
881-25MP-IDL-1.5
881-27MP-IDL-1
881-27MP-IDL-1.25
881-27MP-IDL-1.44
881-27MP-IDL-1.5
881-21P-IDL-1
881-21P-IDL-1.25
881-21P-IDL-1.44
881-21P-IDL-1.5
881-23P-IDL-1
881-23P-IDL-1.25
881-23P-IDL-1.44
881-23P-IDL-1.5
881-25P-IDL-1
881-25P-IDL-1.25
881-25P-IDL-1.44
881-25P-IDL-1.5
-
Le
ng
th
90
Return
Carry
Radius
90
(inches)
Track Width
VT-980-T-18-0325
VT-980-T-24-0325
VT-980-T-24-0450 90
VT-981-T-24-0750
Part Number
Return
Corner Track
Part Number
Straight Track
Return
Ra
diu
s
3.75
3.75
5.0
8.0
Ra
18
Carry
24
diu 24
s
Return
24
Return
See all ValuTrac
modules on pages
70-85
Return
Ra
diu
s
Le
ng
th
Carry
Return
Ra Carry
diu
s
90
Carry
Carry
13
VT-980-T-S-0325-3
VT-980-T-S-0325-6
LeVT-980-T-S-0325-10
ng
th
VT-980-T-S-0450-3
VT-980-T-S-0450-6
Carry
VT-980-T-S-0450-10
Return
VT-981-T-S-0750-3
VT-981-T-S-0750-6
VT-981-T-S-0750-10
enWidth
Track
g
th
3.75
3.75
3.75
5.0
5.0
5.0
8.0
8.0
8.0
Length
(feet)
3
Carry
6
10
3
6
10
3
6
10
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
SC
.26
1.50
.25
R.
1.50
.53
RD=3.15
.39
.12
881 M, 881 MO
1.66
1.06
Conveyor Chains
TRAVEL
Material: Special 400 series "Extra Plus" high performance stainless steel.
Chain Reference
Part Number
Yield
Point (lbs.)
Surface Finish
(micro inches)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
10206
10201
10203
1574
1574
1574
12
12
12
3-1/4
4-1/2
7-1/2
20
24
24
1.77
1.77
1.77
1.73
1.73
1.73
1.74
2.08
3.29
881 MO Speed-Line
Magnetic Side Flexing Chains
Material: Special 400 series "Extra Plus" high performance stainless steel.
Chain Reference
Part Number
Yield
Point (lbs.)
Surface Finish
(micro inches)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
10250
1574
12
3-1/4
20
1.77
1.73
1.74
Material: Special 400 series "Extra Plus" high performance stainless steel.
Pins are made from vacuum hardened stainless steel.
Chain Reference
Part Number
Yield
Point (lbs.)
Surface Finish
(micro inches)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
10260
10265
1574
1574
12
8
3-1/4
3-1/4
20
20
1.77
1.77
1.73
1.73
1.74
1.74
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
14
Conveyor Chains
Machined
Split
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
Part Number
Part Number
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
815-19MP-.71
815-19MP-1
815-19MP-1.25
815-19MP-1.44
815-19MP-1.5
815-21MP-.71
815-21MP-1
815-21MP-1.25
815-21MP-1.44
815-21MP-1.5
815-23MP-.71
815-23MP-1
815-23MP-1.25
815-23MP-1.44
815-23MP-1.5
815-25MP-.71
815-25MP-1
815-25MP-1.25
815-25MP-1.44
815-25MP-1.5
815-27MP-.71
815-27MP-1
815-27MP-1.25
815-27MP-1.44
815-27MP-1.5
815-21P-1
815-21P-1.25
815-21P-1.44
815-21P-1.5
815-23P-1
815-23P-1.25
815-23P-1.44
815-23P-1.5
815-25P-1
815-25P-1.25
815-25P-1.44
815-25P-1.5
-
815-19MP-IDL-1
815-19MP-IDL-1.25
815-19MP-IDL-1.44
815-19MP-IDL-1.5
815-21MP-IDL-1
815-21MP-IDL-1.25
815-21MP-IDL-1.44
815-21MP-IDL-1.5
815-23MP-IDL-1
815-23MP-IDL-1.25
815-23MP-IDL-1.44
815-23MP-IDL-1.5
815-25MP-IDL-1
815-25MP-IDL-1.25
815-25MP-IDL-1.44
815-25MP-IDL-1.5
815-27MP-IDL-1
815-27MP-IDL-1.25
815-27MP-IDL-1.44
815-27MP-IDL-1.5
815-21P-IDL-1
815-21P-IDL-1.25
815-21P-IDL-1.44
815-21P-IDL-1.5
815-23P-IDL-1
815-23P-IDL-1.25
815-23P-IDL-1.44
815-23P-IDL-1.5
815-25P-IDL-1
815-25P-IDL-1.25
815-25P-IDL-1.44
815-25P-IDL-1.5
-
815-21LF-IDL-1
815-21LF-IDL-1.25
815-21LF-IDL-1.44
815-21LF-IDL-1.5
815-23LF-IDL-1
815-23LF-IDL-1.25
815-23LF-IDL-1.44
815-23LF-IDL-1.5
815-25LF-IDL-1
815-25LF-IDL-1.25
815-25LF-IDL-1.44
815-25LF-IDL-1.5
-
815-21-IDL-1
815-21-IDL-1.25
815-21-IDL-1.44
815-21-IDL-1.5
815-25-IDL-1
815-25-IDL-1.25
815-25-IDL-1.44
815-25-IDL-1.5
-
19
19
19
19
19
21
21
21
21
21
23
23
23
23
23
25
25
25
25
25
27
27
27
27
27
Low-Friction
Molded
Molded
Split
15
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.50
.25
1.66
1.75
.37
.53
820
1.50
.28
RD=2.0
.16
Conveyor Chains
TRAVEL
Material: "LF Brown" Low friction acetal with 304 stainless steel pins.
Chain Reference
LF 820 K325
LF 820 K400
LF 820 K450
LF 820 K600
LF 820 K750
Part Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs. per ft.)
11362
11365
11368
11371
11374
1124
1124
1124
1124
1124
3-1/4
4
4-1/2
6
7-1/2
.57
.64
.69
.84
.99
Material: "XP Dark Grey" Very low friction acetal with 304 stainless steel pins.
Chain Reference
XP 820 K325
XP 820 K450
XP 820 K600
XP 820 K750
Part Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs. per ft.)
11100
11102
11103
11104
1079
1079
1079
1079
3-1/4
4-1/2
6
7-1/2
.57
.69
.84
.99
Material: "NG Green" Our proprietary lowest friction PBT with 304 stainless steel pins.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs. per ft.)
NG 820 K325
NG 820 K450
NG 820 K600
NG 820 K750
11151
11154
11155
11156
899
899
899
899
3-1/4
4-1/2
6
7-1/2
.57
.69
.84
.99
16
Conveyor Chains
Idler Options
for 820 Chains
Machined
Split
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
Part Number
Part Number
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
820-19MP-.71
820-19MP-1
820-19MP-1.25
820-19MP-1.44
820-19MP-1.5
820-21MP-.71
820-21MP-1
820-21MP-1.25
820-21MP-1.44
820-21MP-1.5
820-23MP-.71
820-23MP-1
820-23MP-1.25
820-23MP-1.44
820-23MP-1.5
820-25MP-.71
820-25MP-1
820-25MP-1.25
820-25MP-1.44
820-25MP-1.5
820-27MP-.71
820-27MP-1
820-27MP-1.25
820-27MP-1.44
820-27MP-1.5
820-21P-1
820-21P-1.25
820-21P-1.44
820-21P-1.5
820-23P-1
820-23P-1.25
820-23P-1.44
820-23P-1.5
820-25P-1
820-25P-1.25
820-25P-1.44
820-25P-1.5
-
820-19MP-IDL-1
820-19MP-IDL-1.25
820-19MP-IDL-1.44
820-19MP-IDL-1.5
820-21MP-IDL-1
820-21MP-IDL-1.25
820-21MP-IDL-1.44
820-21MP-IDL-1.5
820-23MP-IDL-1
820-23MP-IDL-1.25
820-23MP-IDL-1.44
820-23MP-IDL-1.5
820-25MP-IDL-1
820-25MP-IDL-1.25
820-25MP-IDL-1.44
820-25MP-IDL-1.5
820-27MP-IDL-1
820-27MP-IDL-1.25
820-27MP-IDL-1.44
820-27MP-IDL-1.5
820-21P-IDL-1
820-21P-IDL-1.25
820-21P-IDL-1.44
820-21P-IDL-1.5
820-23P-IDL-1
820-23P-IDL-1.25
820-23P-IDL-1.44
820-23P-IDL-1.5
820-25P-IDL-1
820-25P-IDL-1.25
820-25P-IDL-1.44
820-25P-IDL-1.5
-
815-21LF-IDL-1
815-21LF-IDL-1.25
815-21LF-IDL-1.44
815-21LF-IDL-1.5
815-23LF-IDL-1
815-23LF-IDL-1.25
815-23LF-IDL-1.44
815-23LF-IDL-1.5
815-25LF-IDL-1
815-25LF-IDL-1.25
815-25LF-IDL-1.44
815-25LF-IDL-1.5
-
815-21-IDL-1
815-21-IDL-1.25
815-21-IDL-1.44
815-21-IDL-1.5
815-25-IDL-1
815-25-IDL-1.25
815-25-IDL-1.44
815-25-IDL-1.5
-
19
19
19
19
19
21
21
21
21
21
23
23
23
23
23
25
25
25
25
25
27
27
27
27
27
Low-Friction
Molded
Molded
Split
17
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
831
1.50
1.66
.25
.34
1.75
Low noise level, low coefcient of friction, and low horsepower requirements are the advantages of these chains.
They provide an excellent at surface and medium working
load in a dry running environment.
.53
1.50
.28
RD=2.0
.19
Conveyor Chains
TRAVEL
The added thickness (3/16 in.) of the 831 series top plate
adds 20% more wear life, and simplies conveyor design
when matching with chain series: 821, 879, 882, 878.
Material: "LF Brown" Low friction acetal with 304 stainless steel pins.
Chain Reference
LF 831 K325
LF 831 K450
LF 831 K750
Part Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs. per ft.)
11607
11608
11609
1124
1124
1124
3-1/4
4-1/2
7-1/2
.70
.86
1.22
Material: "XP Dark Grey" Very low friction acetal with 304 stainless steel pins.
Chain Reference
XP 831 K325
XP 831 K450
XP 831 K750
Part Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs. per ft.)
11105
11106
11107
1079
1079
1079
3-1/4
4-1/2
7-1/2
.70
.86
1.22
Material: "NG Green" Our proprietary lowest friction PBT with 304 stainless steel pins.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs. per ft.)
NG 831 K325
NG 831 K450
NG 831 K750
11160
11161
11162
899
899
899
3-1/4
4-1/2
7-1/2
.70
.86
1.22
18
Conveyor Chains
Idler Options
for 831 Chains
Machined
Split
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
Part Number
Part Number
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
820-19MP-.71
820-19MP-1
820-19MP-1.25
820-19MP-1.44
820-19MP-1.5
820-21MP-.71
820-21MP-1
820-21MP-1.25
820-21MP-1.44
820-21MP-1.5
820-23MP-.71
820-23MP-1
820-23MP-1.25
820-23MP-1.44
820-23MP-1.5
820-25MP-.71
820-25MP-1
820-25MP-1.25
820-25MP-1.44
820-25MP-1.5
820-27MP-.71
820-27MP-1
820-27MP-1.25
820-27MP-1.44
820-27MP-1.5
820-21P-1
820-21P-1.25
820-21P-1.44
820-21P-1.5
820-23P-1
820-23P-1.25
820-23P-1.44
820-23P-1.5
820-25P-1
820-25P-1.25
820-25P-1.44
820-25P-1.5
-
820-19MP-IDL-1
820-19MP-IDL-1.25
820-19MP-IDL-1.44
820-19MP-IDL-1.5
820-21MP-IDL-1
820-21MP-IDL-1.25
820-21MP-IDL-1.44
820-21MP-IDL-1.5
820-23MP-IDL-1
820-23MP-IDL-1.25
820-23MP-IDL-1.44
820-23MP-IDL-1.5
820-25MP-IDL-1
820-25MP-IDL-1.25
820-25MP-IDL-1.44
820-25MP-IDL-1.5
820-27MP-IDL-1
820-27MP-IDL-1.25
820-27MP-IDL-1.44
820-27MP-IDL-1.5
820-21P-IDL-1
820-21P-IDL-1.25
820-21P-IDL-1.44
820-21P-IDL-1.5
820-23P-IDL-1
820-23P-IDL-1.25
820-23P-IDL-1.44
820-23P-IDL-1.5
820-25P-IDL-1
820-25P-IDL-1.25
820-25P-IDL-1.44
820-25P-IDL-1.5
-
815-21LF-IDL-1
815-21LF-IDL-1.25
815-21LF-IDL-1.44
815-21LF-IDL-1.5
815-23LF-IDL-1
815-23LF-IDL-1.25
815-23LF-IDL-1.44
815-23LF-IDL-1.5
815-25LF-IDL-1
815-25LF-IDL-1.25
815-25LF-IDL-1.44
815-25LF-IDL-1.5
-
815-21-IDL-1
815-21-IDL-1.25
815-21-IDL-1.44
815-21-IDL-1.5
815-25-IDL-1
815-25-IDL-1.25
815-25-IDL-1.44
815-25-IDL-1.5
-
19
19
19
19
19
21
21
21
21
21
23
23
23
23
23
25
25
25
25
25
27
27
27
27
27
Low-Friction
Molded
Molded
Split
19
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
828
RD=2.0
1.50
3.25
.28
1.65
.44
Very versatile
Higher load capacity than standard series
Can be used in combination with 880 series
Improved product stability
1.50
.30
.16
Conveyor Chains
Material: "LF Brown" Low friction acetal with 304 stainless steel pins.
Chain Reference
LF 828 K325
Part Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs. per ft.)
11130
1349
3-1/4
.60
Material: "XP Dark Grey" Very low friction acetal with 304 stainless steel pins.
Chain Reference
XP 828 K325
Part Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs. per ft.)
11132
1259
3-1/4
.60
Material: "NG Green" Proprietary lowest friction PBT with 304 stainless steel pins.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs. per ft.)
NG 828 K325
11134
1124
3-1/4
.62
20
Conveyor Chains
Idler Options
for 879, 880 Chains
Machined
Split
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
880-9MP-.71
880-9MP-1
880-9MP-1.25
880-9MP-1.44
880-9MP-1.5
880-10MP-.71
880-10MP-1
880-10MP-1.25
880-10MP-1.44
880-10MP-1.5
880-11MP-.71
880-11MP-1
880-11MP-1.25
880-11MP-1.44
880-11MP-1.5
880-12MP-.71
880-12MP-1
880-12MP-1.25
880-12MP-1.44
880-12MP-1.5
880-10P-1
880-10P-1.25
880-10P-1.44
880-10P-1.5
880-12P-1
880-12P-1.25
880-12P-1.44
880-12P-1.5
880-9MP-IDL-1
880-9MP-IDL-1.25
880-9MP-IDL-1.44
880-9MP-IDL-1.5
880-10MP-IDL-1
880-10MP-IDL-1.25
880-10MP-IDL-1.44
880-10MP-IDL-1.5
880-11MP-IDL-1
880-11MP-IDL-1.25
880-11MP-IDL-1.44
880-11MP-IDL-1.5
880-12MP-IDL-1
880-12MP-IDL-1.25
880-12MP-IDL-1.44
880-12MP-IDL-1.5
880-10P-IDL-1
880-10P-IDL-1.25
880-10P-IDL-1.44
880-10P-IDL-1.5
880-12P-IDL-1
880-12P-IDL-1.25
880-12P-IDL-1.44
880-12P-IDL-1.5
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
Low-Friction
Molded
Molded
Split
815-21LF-IDL-1
815-21LF-IDL-1.25
815-21LF-IDL-1.44
815-21LF-IDL-1.5
815-21-IDL-1
815-21-IDL-1.25
815-21-IDL-1.44
815-21-IDL-1.5
815-25LF-IDL-1
815-25LF-IDL-1.25
815-25LF-IDL-1.44
815-25LF-IDL-1.5
815-25-IDL-1
815-25-IDL-1.25
815-25-IDL-1.44
815-25-IDL-1.5
21
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
RD=2.0
.31
1.50
.25
.37
1.50
.56
821
.19
5.51
Conveyor Chains
TRAVEL
Material: "LF Brown" Low friction acetal with 304 stainless steel pins.
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs. per ft.)
LF 821 K750
LF 821 K1000
LF 821 K1200
11002
11004
11006
1866
1866
1866
7-1/2
10
12
1.74
2.08
2.25
Material: "XP Dark Grey" Very low friction acetal with 304 stainless steel pins.
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs. per ft.)
XP 821 K750
XP 821 K1000
XP 821 K1200
11510
11511
11512
1821
1821
1821
7-1/2
10
12
1.74
2.08
2.25
Material: "NG Green" Our proprietary lowest friction PBT with 304 stainless steel pins.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs. per ft.)
NG 821 K750
NG 821 K1000
NG 821 K1200
11170
11171
11172
1753
1753
1753
7-1/2
10
12
1.74
2.08
2.25
22
Conveyor Chains
Drive Sprocket
Options for 821
Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
21
21
21
21
21
23
23
23
23
23
25
25
25
25
25
27
27
27
27
27
Idler Options
for 821 Chains
Machined
Split
Machined
Split
Part Number
Part Number
821-21MP-.71
821-21MP-1
821-21MP-1.25
821-21MP-1.44
821-21MP-1.5
821-23MP-.71
821-23MP-1
821-23MP-1.25
821-23MP-1.44
821-23MP-1.5
821-25MP-.71
821-25MP-1
821-25MP-1.25
821-25MP-1.44
821-25MP-1.5
821-27MP-.71
821-27MP-1
821-27MP-1.25
821-27MP-1.44
821-27MP-1.5
821-21MP-IDL-1
821-21MP-IDL-1.25
821-21MP-IDL-1.44
821-21MP-IDL-1.5
821-23MP-IDL-1
821-23MP-IDL-1.25
821-23MP-IDL-1.44
821-23MP-IDL-1.5
821-25MP-IDL-1
821-25MP-IDL-1.25
821-25MP-IDL-1.44
821-25MP-IDL-1.5
821-27MP-IDL-1
821-27MP-IDL-1.25
821-27MP-IDL-1.44
821-27MP-IDL-1.5
23
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.19
RD=2.0
878 TAB
SC
.46
1.69
1.50
1.50
.28
.33
The new 878 TAB series enables the designer and the
manufacturer of conveyors to reduce the average radius
in turns. This unique chain solves conveying problems in
conned spaces. It can also be used where products are
conveyed on an incline or decline.
.82
2.43
R.
Conveyor Chains
TRAVEL
Material: "LF Brown" Low friction acetal with 304 stainless steel pins.
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11390
1349
3-1/4
7.87
1.81
1.77
.40
Material: "XP Dark Grey" Very low friction acetal with 304 stainless steel pins.
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11420
1281
3-1/4
7.87
1.81
1.77
.40
Material: "NG Green" Our proprietary lowest friction PBT with 304 stainless steel pins.
Chain Reference
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Part Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11422
1124
3-1/4
7.87
1.81
1.77
.40
24
Conveyor Chains
Drive Sprocket
Options for 878
TAB Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
Machined
Split
Molded
Split
Idler Options
for 878 TAB
Chains
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
880-9MP-.71
880-9MP-1
880-9MP-1.25
880-9MP-1.44
880-9MP-1.5
880-10MP-.71
880-10MP-1
880-10MP-1.25
880-10MP-1.44
880-10MP-1.5
880-11MP-.71
880-11MP-1
880-11MP-1.25
880-11MP-1.44
880-11MP-1.5
880-12MP-.71
880-12MP-1
880-12MP-1.25
880-12MP-1.44
880-12MP-1.5
880-10P-1
880-10P-1.25
880-10P-1.44
880-10P-1.5
880-12P-1
880-12P-1.25
880-12P-1.44
880-12P-1.5
880-9MP-IDL-1
880-9MP-IDL-1.25
880-9MP-IDL-1.44
880-9MP-IDL-1.5
880-10MP-IDL-1
880-10MP-IDL-1.25
880-10MP-IDL-1.44
880-10MP-IDL-1.5
880-11MP-IDL-1
880-11MP-IDL-1.25
880-11MP-IDL-1.44
880-11MP-IDL-1.5
880-12MP-IDL-1
880-12MP-IDL-1.25
880-12MP-IDL-1.44
880-12MP-IDL-1.5
880-10P-IDL-1
880-10P-IDL-1.25
880-10P-IDL-1.44
880-10P-IDL-1.5
880-12P-IDL-1
880-12P-IDL-1.25
880-12P-IDL-1.44
880-12P-IDL-1.5
Turning
Disk
Turning Disk
25
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
RD=2.0
879, 880
1.50
SC
1.50
1.69
R.
.30
.28
.63
Conveyor Chains
TRAVEL
Material: "LF Brown" Low friction acetal with 304 stainless steel pins.
Part Number
Breaking
Load (lbs.)
L
(width)
B
(thickness)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
LF 880 K325
LF 880 K450
11383
11386
1349
1349
3-1/4
4-1/2
.16
.16
18
18
1.75
1.75
1.63
1.63
.60
.70
LF 879 K325
LF 879 K450
11506
11507
1349
1349
3-1/4
4-1/2
.19
.19
18
18
1.75
1.75
1.63
1.63
.62
.74
Chain Reference
Material: "XP Dark Grey" Very low friction acetal with 304 stainless steel pins.
Part Number
Breaking
Load (lbs.)
L
(width)
B
(thickness)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
XP 880 K325
XP 880 K450
11502
11503
1281
1281
3-1/4
4-1/2
.16
.16
18
18
1.75
1.75
1.63
1.63
.60
.70
XP 879 K325
XP 879 K450
11508
11509
1281
1281
3-1/4
4-1/2
.19
.19
18
18
1.75
1.75
1.63
1.63
.62
.74
Chain Reference
Material: "NG Green" Our proprietary lowest friction PBT with 304 stainless steel pins.
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
B
(thickness)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
NG 880 K325
NG 880 K450
11187
11185
1124
1124
3-1/4
4-1/2
.16
.16
18
18
1.75
1.75
1.63
1.63
.60
.70
NG 879 K325
NG 879 K450
11193
11194
1124
1124
3-1/4
4-1/2
.19
.19
18
18
1.75
1.75
1.63
1.63
.62
.74
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
26
Conveyor Chains
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
Machined
Split
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
880-10P-1
880-10P-1.25
880-10P-1.44
880-10P-1.5
880-12P-1
880-12P-1.25
880-12P-1.44
880-12P-1.5
880-9MP-IDL-1
880-9MP-IDL-1.25
880-9MP-IDL-1.44
880-9MP-IDL-1.5
880-10MP-IDL-1
880-10MP-IDL-1.25
880-10MP-IDL-1.44
880-10MP-IDL-1.5
880-11MP-IDL-1
880-11MP-IDL-1.25
880-11MP-IDL-1.44
880-11MP-IDL-1.5
Le
880-12MP-IDL-1
ng
th
880-12MP-IDL-1.25
Le Carry
880-12MP-IDL-1.44
ng
th
880-12MP-IDL-1.5
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
880-9MP-.71
880-9MP-1
880-9MP-1.25
880-9MP-1.44
880-9MP-1.5
880-10MP-.71
880-10MP-1
880-10MP-1.25
880-10MP-1.44
880-10MP-1.5
880-11MP-.71
880-11MP-1
880-11MP-1.25
880-11MP-1.44
880-11MP-1.5
880-12MP-.71
880-12MP-1
880-12MP-1.25
Carry
880-12MP-1.44
880-12MP-1.5
90
*Plain bore pilot hole. Not sized to
a shaft. Carry
Return
90
Ra
diu
s
Ra
diu
s
Idler Options
for 879, 880 Chains
815-21LF-IDL-1
815-21LF-IDL-1.25
815-21LF-IDL-1.44
815-21LF-IDL-1.5
815-21-IDL-1
815-21-IDL-1.25
815-21-IDL-1.44
815-21-IDL-1.5
815-25LF-IDL-1
815-25LF-IDL-1.25
815-25LF-IDL-1.44
815-25LF-IDL-1.5
815-25-IDL-1
815-25-IDL-1.25
815-25-IDL-1.44
815-25-IDL-1.5
Return
Le
ng
th
Le
ngCarry
th
Carry
Carry
90
90
Straight Track
Return
Part Number
Return
Return
Molded
Split
Return
Return
Carry
Ra
diu
880-10P-IDL-1
880-10P-IDL-1.25
880-10P-IDL-1.44
880-10P-IDL-1.5
880-12P-IDL-1
880-12P-IDL-1.25
880-12P-IDL-1.44
880-12P-IDL-1.5
Carry
Low-Friction
Molded
Return
Ra
diu
s
Corner Track
Part Number
VT-980-B-18-0325
VT-980-B-24-0325
VT-980-R-18-0325
VT-980-R-24-0325
VT-980-B-24-0450
VT-980-R-24-0450
Track Width
Carry or
Return
Radius
(inches)
3.75
3.75
3.75
3.75
5.0
5.0
Carry
Carry
Return
Return
Carry
Return
18
24
18
24
24
24
27
VT-980-B-S-0325-3
VT-980-B-S-0325-6
VT-980-B-S-0325-10
VT-980-R-S-0325-3
VT-980-R-S-0325-6
VT-980-R-S-0325-10
VT-980-B-S-0450-3
VT-980-B-S-0450-6
VT-980-B-S-0450-10
VT-980-R-S-0450-3
VT-980-R-S-0450-6
VT-980-R-S-0450-10
Track Width
Carry or
Return
Length
(feet)
3.75
3.75
3.75
3.75
3.75
3.75
5.0
5.0
5.0
5.0
5.0
5.0
Carry
Carry
Carry
Return
Return
Return
Carry
Carry
Carry
Return
Return
Return
3
6
10
3
6
10
3
6
10
3
6
10
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.69
1.50
1.50
.28
SC
.30
.45
RD=2.0
.63
2.40
R.
Conveyor Chains
TRAVEL
Material: "LF Brown" Low friction acetal with 304 stainless steel pins.
Part Number
Breaking
Load (lbs.)
L
(width)
B
(thickness)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11377
11380
1349
1349
3-1/4
4-1/2
.16
.16
18
18
1.81
1.81
1.77
1.77
.63
.72
11377ST
11380ST
1349
1349
3-1/4
4-1/2
.19
.19
18
18
1.81
1.81
1.77
1.77
.66
.76
Chain Reference
Material: "XP Dark Grey" Very low friction acetal with 304 stainless steel pins.
Chain Reference
Breaking
Part Number Load (lbs.)
L
(width)
B
(thickness)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11500
11501
1281
1281
3-1/4
4-1/2
.16
.16
18
18
1.81
1.81
1.77
1.77
.63
.72
11504
11505
1281
1281
3-1/4
4-1/2
.19
.19
18
18
1.81
1.81
1.77
1.77
.66
.76
Material: "NG Green" Our proprietary lowest friction PBT with 304 stainless steel pins.
Part Number
Breaking
Load (lbs.)
L
(width)
B
(thickness)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11195
11197
1124
1124
3-1/4
4-1/2
.16
.16
18
18
1.81
1.81
1.77
1.77
.63
.72
11198
11199
1124
1124
3-1/4
4-1/2
.19
.19
18
18
1.81
1.81
1.77
1.77
.66
.76
Chain Reference
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
28
Conveyor Chains
Drive Sprocket
Options for 879,
880 TAB Chains
Machined
Split
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
Idler Options
for 879, 880
TAB Chains
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
880-9MP-.71
880-9MP-1
880-9MP-1.25
880-9MP-1.44
880-9MP-1.5
880-10MP-.71
880-10MP-1
880-10MP-1.25
880-10MP-1.44
880-10MP-1.5
880-11MP-.71
880-11MP-1
880-11MP-1.25
880-11MP-1.44
880-11MP-1.5
880-12MP-.71
880-12MP-1
880-12MP-1.25
880-12MP-1.44
880-12MP-1.5
880-10P-1
880-10P-1.25
880-10P-1.44
880-10P-1.5
880-12P-1
880-12P-1.25
880-12P-1.44
880-12P-1.5
880-9MP-IDL-1
880-9MP-IDL-1.25
880-9MP-IDL-1.44
880-9MP-IDL-1.5
880-10MP-IDL-1
880-10MP-IDL-1.25
880-10MP-IDL-1.44
880-10MP-IDL-1.5
880-11MP-IDL-1
880-11MP-IDL-1.25
880-11MP-IDL-1.44
880-11MP-IDL-1.5
880-12MP-IDL-1
880-12MP-IDL-1.25
880-12MP-IDL-1.44
880-12MP-IDL-1.5
880-10P-IDL-1
880-10P-IDL-1.25
880-10P-IDL-1.44
880-10P-IDL-1.5
880-12P-IDL-1
880-12P-IDL-1.25
880-12P-IDL-1.44
880-12P-IDL-1.5
Le
n
gth
Carry
Carry
Return
Le
ng
th
Carry
Carry
Ra
diu
s
90
Return
diu
s
Part Number
Carry
Corner Track
Track Width
VT-980-T-18-0325
VT-980-T-24-0325
90
VT-980-T-24-0450
Ra
diu
s
Straight Track
Return
Ra
Part Number
Return
3.75
3.75
5.0
Radius
90
(inches)
Carry
18
24
Ra 24
diu
Return
s
Return
Le
ng
th
VT-980-T-S-0325-3
VT-980-T-S-0325-6
Carry
VT-980-T-S-0325-10
VT-980-T-S-0450-3
VT-980-T-S-0450-6
Return
VT-980-T-S-0450-10
Le
n
gth
Length
Track WidthCarry(feet)
3.75
3.75
3.75
5.0
5.0
5.0
3
6
10
3
6
10
29
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
882
1.50
.88
.34
.19
1.50
.37
RD=2.0
SC
Heavy duty
Large, at surface
Low coefcient of friction
8
2.40
.69
R.
Conveyor Chains
TRAVEL
Material: "LF Brown" Low friction acetal with 304 stainless steel pins.
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
LF 882 K450
LF 882 K750
LF 882 K1000
11459
11460
11461
2248
2248
2248
4-1/2
7-1/2
10
24
24
24
2.44
2.44
2.44
2.28
2.28
2.28
1.30
1.60
1.90
Material: "XP Dark Grey" Very low friction acetal with 304 stainless steel pins.
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
XP 882 K450
XP 882 K750
XP 882 K1000
11462
11463
11464
2136
2136
2136
4-1/2
7-1/2
10
24
24
24
2.44
2.44
2.44
2.28
2.28
2.28
1.30
1.60
1.90
Material: "NG Green" Our proprietary lowest friction PBT with 304 stainless steel pins.
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
NG 882 K450
NG 882 K750
NG 882 K1000
11480
11481
11482
2023
2023
2023
4-1/2
7-1/2
10
24
24
24
2.44
2.44
2.44
2.28
2.28
2.28
1.30
1.60
1.90
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
30
Conveyor Chains
Drive Sprocket
Options for 882
Chains
Idler Options
for 882 Chains
Machined
Split
Molded
Split
Part Number
Part Number
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
882-9MP-.71
1
882-9MP-1
1-1/4
882-9MP-1.25
1-7/16
882-9MP-1.44
1-1/2
882-9MP-1.5
.71*
882-10MP-.71
1
882-10MP-1
1-1/4
882-10MP-1.25
1-7/16
882-10MP-1.44
1-1/2
882-10MP-1.5
.71*
882-11MP-.71
1
882-11MP-1
1-1/4
882-11MP-1.25
1-7/16
882-11MP-1.44
1-1/2
882-11MP-1.5
.71*
882-12MP-.71
1
882-12MP-1
1-1/4
882-12MP-1.25
1-7/16
882-12MP-1.44
1-1/2
882-12MP-1.5
90
90
*Plain bore pilot hole. Not sized to a shaft.
Ra
Ra
diu
s
Machined
Split
Molded
Split
Part Number
882-10P-1
882-10P-1.25
882-10P-1.44
882-10P-1.5
882-12P-1
882-12P-1.25
Carry
882-12P-1.44
Carry
Part Number
882-9MP-IDL-1
882-9MP-IDL-1.25
882-9MP-IDL-1.44
882-9MP-IDL-1.5
882-10MP-IDL-1
882-10MP-IDL-1.25
882-10MP-IDL-1.44
882-10MP-IDL-1.5
882-11MP-IDL-1
882-11MP-IDL-1.25
882-11MP-IDL-1.44
882-11MP-IDL-1.5
Le
Le
882-12MP-IDL-1
ng
ng
th
th
882-12MP-IDL-1.25
Carry
Carry
882-12MP-IDL-1.44
882-12MP-IDL-1.5
882-12P-1.5
Return
Return
Return
diu
s
Return
Le
ng
th
Le
ng
th
Carry
Carry
90
90
Corner Track
Part Number
VT-982-B-24-0450
VT-982-R-24-0450
VT-982-B-24-0750
VT-982-R-24-0750
Carry
Carry
Return
Return
Ra
diu
s
882-10P-IDL-1
882-10P-IDL-1.25
882-10P-IDL-1.44
882-10P-IDL-1.5
882-12P-IDL-1
882-12P-IDL-1.25
882-12P-IDL-1.44
882-12P-IDL-1.5
Return
Return
Ra
diu
Track Width
Carry or
Return
Radius
(inches)
5.0
5.0
8.0
8.0
Carry
Return
Carry
Return
24
24
24
24
Straight Track
Part Number
31
VT-982-B-S-0450-3
VT-982-B-S-0450-6
VT-982-B-S-0450-10
VT-982-R-S-0450-3
VT-982-R-S-0450-6
VT-982-R-S-0450-10
VT-982-B-S-0750-3
VT-982-B-S-0750-6
VT-982-B-S-0750-10
VT-982-R-S-0750-3
VT-982-R-S-0750-6
VT-982-R-S-0750-10
Track Width
Carry or
Return
Length
(feet)
5.0
5.0
5.0
5.0
5.0
5.0
8.0
8.0
8.0
8.0
8.0
8.0
Carry
Carry
Carry
Return
Return
Return
Carry
Carry
Carry
Return
Return
Return
3
6
10
3
6
10
3
6
10
3
6
10
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
RD=2.0
.37
.34
.19
1.50
1.06
1.50
2.23
Heavy duty
Large, at surface
Low coefcient of friction
.87
882 TAB
SC
.68
2.99
Due to a larger hinge and pin size, plus a well balanced distribution of materials, the 882 TAB chain
has excellent load carrying capacity, comparable
with that of the 821 chain's double hinge design.
Standard sizes are up to 12" wide, making it compatible with the 821 series. 882 TAB offers the largest
conveying area in the side exing at top chain
product line.
R.
Conveyor Chains
TRAVEL
Material: "LF Brown" Low friction acetal with 304 stainless steel pins.
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11040
11041
11042
11043
2248
2248
2248
2248
4-1/2
7-1/2
10
12
24
24
24
24
2.36
2.36
2.36
2.36
2.28
2.28
2.28
2.28
1.36
1.65
1.93
2.29
Material: "XP Dark Grey" Very low friction acetal with 304 stainless steel pins.
Chain Reference
Part Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11513
11514
11515
11516
2136
2136
2136
2136
4-1/2
7-1/2
10
12
24
24
24
24
2.36
2.36
2.36
2.36
2.28
2.28
2.28
2.28
1.36
1.65
1.93
2.29
Material: "NG Green" Our proprietary lowest friction PBT with 304 stainless steel pins.
Chain Reference
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Part Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11483
11484
11485
11486
2023
2023
2023
2023
4-1/2
7-1/2
10
12
24
24
24
24
2.36
2.36
2.36
2.36
2.28
2.28
2.28
2.28
1.36
1.65
1.93
2.29
32
Conveyor Chains
Drive Sprocket
Options for 882
TAB Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
Machined
Split
Idler Options
for 882 TAB
Chains
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
882-9MP-.71
882-9MP-1
882-9MP-1.25
882-9MP-1.44
882-9MP-1.5
882-10MP-.71
882-10MP-1
882-10MP-1.25
882-10MP-1.44
882-10MP-1.5
882-11MP-.71
882-11MP-1
882-11MP-1.25
882-11MP-1.44
882-11MP-1.5
882-12MP-.71
882-12MP-1
882-12MP-1.25
882-12MP-1.44
882-12MP-1.5
882-10P-1
882-10P-1.25
882-10P-1.44
882-10P-1.5
882-12P-1
882-12P-1.25
882-12P-1.44
882-12P-1.5
882-9MP-IDL-1
882-9MP-IDL-1.25
882-9MP-IDL-1.44
882-9MP-IDL-1.5
882-10MP-IDL-1
882-10MP-IDL-1.25
882-10MP-IDL-1.44
882-10MP-IDL-1.5
882-11MP-IDL-1
882-11MP-IDL-1.25
882-11MP-IDL-1.44
882-11MP-IDL-1.5
882-12MP-IDL-1
882-12MP-IDL-1.25
882-12MP-IDL-1.44
882-12MP-IDL-1.5
882-10P-IDL-1
882-10P-IDL-1.25
882-10P-IDL-1.44
882-10P-IDL-1.5
882-12P-IDL-1
882-12P-IDL-1.25
882-12P-IDL-1.44
882-12P-IDL-1.5
Carry Carry
Carry
Carry
90
90
Return
Return
Return
Return
RR
adad
iuisus
Corner Track
Part Number
Track Width
Radius
(inches)
5.0
8.0
24
Carry
VT-982-T-24-0450
VT-982-T-24-0750
Straight Track
Le
Length
ng Len
gTrack
th
(feet)
th Width
Carry
VT-982-T-S-0450-3
5.0 Carry 3
Part Number
24
VT-982-T-S-0450-6
VT-982-T-S-0450-10
VT-982-T-S-0750-3
VT-982-T-S-0750-6
Return
VT-982-T-S-0750-10
Return
Carry
90
90
Return
Return
Ra
Rdaius
diu
s
5.0
5.0
8.0
8.0
8.0
6
10
3
6
10
33
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
0.12
0.33
1.50
0.28
0.82
1.50
1.69
0.59
2.43
R.
2.36
RD=2.0
SC
0.19
878 TAB VG
0.46
Conveyor Chains
TRAVEL
Material: "NG Dark Grey" Our proprietary lowest friction PBT with 304 stainless steel pins.
Water blue thermoplastic rubber pads.
Chain Reference
Part
Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs./ft.)
11391
1124
3.25
7.87
1.81
1.77
0.60
Custom pad spacing available upon request. Pads are assembled per order based on customer requirements. Indicate distance between rubber pads when ordering.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
34
Conveyor Chains
Drive Sprocket
Options for 878
TAB VG Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
Machined
Split
Molded
Split
Idler Options
for 878 TAB VG
Chains
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
880-9MP-.71
880-9MP-1
880-9MP-1.25
880-9MP-1.44
880-9MP-1.5
880-10MP-.71
880-10MP-1
880-10MP-1.25
880-10MP-1.44
880-10MP-1.5
880-11MP-.71
880-11MP-1
880-11MP-1.25
880-11MP-1.44
880-11MP-1.5
880-12MP-.71
880-12MP-1
880-12MP-1.25
880-12MP-1.44
880-12MP-1.5
880-10P-1
880-10P-1.25
880-10P-1.44
880-10P-1.5
880-12P-1
880-12P-1.25
880-12P-1.44
880-12P-1.5
880-9MP-IDL-1
880-9MP-IDL-1.25
880-9MP-IDL-1.44
880-9MP-IDL-1.5
880-10MP-IDL-1
880-10MP-IDL-1.25
880-10MP-IDL-1.44
880-10MP-IDL-1.5
880-11MP-IDL-1
880-11MP-IDL-1.25
880-11MP-IDL-1.44
880-11MP-IDL-1.5
880-12MP-IDL-1
880-12MP-IDL-1.25
880-12MP-IDL-1.44
880-12MP-IDL-1.5
880-10P-IDL-1
880-10P-IDL-1.25
880-10P-IDL-1.44
880-10P-IDL-1.5
880-12P-IDL-1
880-12P-IDL-1.25
880-12P-IDL-1.44
880-12P-IDL-1.5
Turning
Disk
Turning Disk
35
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
879 TAB VG
0.30
1.50
0.28
0.12
1.50
0.45
0.59
1.69
2.40
R.
2.36
0.19
RD=2.0
SC
0.63
Conveyor Chains
TRAVEL
Material: "NG Dark Grey" Our proprietary lowest friction PBT with 304 stainless steel pins.
Water blue thermoplastic rubber pads.
Chain Reference
Part
Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs./ft.)
11242
11245
1124
1124
3.25
4.25
18
18
1.81
1.81
1.77
1.77
0.94
1.07
Custom pad spacing available upon request. Pads are assembled per order based on customer requirements. Indicate distance between rubber pads when ordering.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
36
Conveyor Chains
Drive Sprocket
Options for 879
TAB VG Chains
Machined
Split
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
Idler Options
for 879 TAB VG
Chains
Machined
Molded
Split
Molded
Split
Split
Part Number
Part Number
Part Number
Part Number
880-9MP-.71
880-9MP-1
880-9MP-1.25
880-9MP-1.44
880-9MP-1.5
880-10MP-.71
880-10MP-1
880-10MP-1.25
880-10MP-1.44
880-10MP-1.5
880-11MP-.71
880-11MP-1
880-11MP-1.25
880-11MP-1.44
880-11MP-1.5
880-12MP-.71
880-12MP-1
880-12MP-1.25
880-12MP-1.44
880-12MP-1.5
880-10P-1
880-10P-1.25
880-10P-1.44
880-10P-1.5
880-12P-1
880-12P-1.25
880-12P-1.44
880-12P-1.5
880-9MP-IDL-1
880-9MP-IDL-1.25
880-9MP-IDL-1.44
880-9MP-IDL-1.5
880-10MP-IDL-1
880-10MP-IDL-1.25
880-10MP-IDL-1.44
880-10MP-IDL-1.5
880-11MP-IDL-1
880-11MP-IDL-1.25
880-11MP-IDL-1.44
880-11MP-IDL-1.5
880-12MP-IDL-1
880-12MP-IDL-1.25
880-12MP-IDL-1.44
880-12MP-IDL-1.5
880-10P-IDL-1
880-10P-IDL-1.25
880-10P-IDL-1.44
880-10P-IDL-1.5
880-12P-IDL-1
880-12P-IDL-1.25
880-12P-IDL-1.44
880-12P-IDL-1.5
Le
ng
th
Carry
Return
Return
diu
s
Straight Track
Part Number
Carry
Corner Track
Track Width
diu
s
Return
Return
Ra
Ra
Carry
Carry
diu
s
90
VT-980-T-18-0325
VT-980-T-24-0325
90
VT-980-T-24-0450
gth
Carry
Ra
Part Number
Le
n
3.75
3.75
5.0
Radius
90
(inches)
Carry
18
24
Ra
24
diuReturn
s
Return
VT-980-T-S-0325-3
Le
ng
thVT-980-T-S-0325-6
Carry
VT-980-T-S-0325-10
VT-980-T-S-0450-3
VT-980-T-S-0450-6
Return
VT-980-T-S-0450-10
Le
ng
th
Length
Track WidthCarry(feet)
3.75
3.75
3.75
5.0
5.0
5.0
3
6
10
3
6
10
37
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.50
0.37
1.50
1.18
2.25
0.75
R.
0.91
3.00
WR
0.34
0.19
0.04
0.87
882 TAB VG
SC
0.12
Conveyor Chains
TRAVEL
Material: "NG Dark Grey" Our proprietary lowest friction PBT with 304 stainless steel pins.
Water blue thermoplastic rubber pads.
Chain Reference
Part
Number
11093
11094
11095
Breaking
L
Load (lbs.) (width)
2023
2023
2023
7.50
10.00
12.00
WR
(width)
R
Min.
5.31
7.50
10.00
24
24
24
SC
SC
Weight
Straight Curved (lbs./ft.)
2.36
2.36
2.36
2.28
2.28
2.28
1.58
1.78
1.95
Custom pad spacing available upon request. Pads are assembled per order based on customer requirements. Indicate distance between rubber pads when ordering.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
38
Conveyor Chains
Drive Sprocket
Options for 882
TAB VG Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
Machined
Split
Idler Options
for 882 TAB VG
Chains
Machined
Molded
Split
Molded
Split
Split
Part Number
Part Number
Part Number
Part Number
882-9MP-.71
882-9MP-1
882-9MP-1.25
882-9MP-1.44
882-9MP-1.5
882-10MP-.71
882-10MP-1
882-10MP-1.25
882-10MP-1.44
882-10MP-1.5
882-11MP-.71
882-11MP-1
882-11MP-1.25
882-11MP-1.44
882-11MP-1.5
882-12MP-.71
882-12MP-1
882-12MP-1.25
882-12MP-1.44
882-12MP-1.5
882-10P-1
882-10P-1.25
882-10P-1.44
882-10P-1.5
882-12P-1
882-12P-1.25
882-12P-1.44
882-12P-1.5
882-9MP-IDL-1
882-9MP-IDL-1.25
882-9MP-IDL-1.44
882-9MP-IDL-1.5
882-10MP-IDL-1
882-10MP-IDL-1.25
882-10MP-IDL-1.44
882-10MP-IDL-1.5
882-11MP-IDL-1
882-11MP-IDL-1.25
882-11MP-IDL-1.44
882-11MP-IDL-1.5
882-12MP-IDL-1
882-12MP-IDL-1.25
882-12MP-IDL-1.44
882-12MP-IDL-1.5
882-10P-IDL-1
882-10P-IDL-1.25
882-10P-IDL-1.44
882-10P-IDL-1.5
882-12P-IDL-1
882-12P-IDL-1.25
882-12P-IDL-1.44
882-12P-IDL-1.5
90
90
Carry
Track Width
VT-982-T-24-0750
8.0
Return
90
Le
n
Le
Length
ngTrack Width
(feet)
th
VT-982-T-S-0750-3Carry 8.0 Carry 3
VT-982-T-S-0750-6
8.0
6
VT-982-T-S-0750-10
8.0
10
Part Numbergth
24
Return
Carry
Return
Return
Ra
diu
sRad
ius
Return
Straight Track
Radius
(inches)
Carry
90
Carry
Return Return
R
diu adiu
s
s
Part Number
ng
th
Carry
Ra
Corner Track
Le
Return
39
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
0.28
0.33
Exceptional durability
Optimum performance
Extremely low noise level
Removable gripper
0.82
0.19
SC
878 TAB GS
0.46
1.69
1.50
1.50
2.43
R.
TRAVEL
1.61
1.61
1.61
K
K
GS1 Style
Light Applications
TRAVEL
TRAVEL
Material: "LFG Grey" Low friction acetal with thermoplastic gripper and 304 stainless pins.
Chain Reference
Part
Number
11407
11736
11740
1349
L
(width)
3.23
3.25
R
SC
SC
Weight
Min. Straight Curved (lbs./ft.)
7.87
1.81
1.77
3.12
1.38
1.38
1.38
K
K
GS2 Style
Heavy Applications
TRAVEL
TRAVEL
Material: "LFG Grey" Low friction acetal with thermoplastic gripper and 304 stainless pins.
Chain Reference
Part
Number
11408
11737
11742
1349
L
(width)
3.23
3.25
R
SC
SC
Weight
Min. Straight Curved (lbs./ft.)
7.87
1.81
1.77
2.72
K
K
1.32
1.32
1.32
Conveyor Chains
GS3 Style
Special Applications
TRAVEL
TRAVEL
Material: "LFG Grey" Low friction acetal with thermoplastic gripper and 304 stainless pins.
Chain Reference
Part
Number
11409
11738
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
40
11744
1349
L
(width)
3.23
3.25
R
SC
SC
Weight
Min. Straight Curved (lbs./ft.)
7.87
1.81
1.77
2.65
Conveyor Chains
Drive Sprocket
Options for 878
TAB GS Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
Machined
Split
Molded
Split
Idler Options
for 878 TAB
GS Chains
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
880-9MP-.71
880-9MP-1
880-9MP-1.25
880-9MP-1.44
880-9MP-1.5
880-10MP-.71
880-10MP-1
880-10MP-1.25
880-10MP-1.44
880-10MP-1.5
880-11MP-.71
880-11MP-1
880-11MP-1.25
880-11MP-1.44
880-11MP-1.5
880-12MP-.71
880-12MP-1
880-12MP-1.25
880-12MP-1.44
880-12MP-1.5
880-10P-1
880-10P-1.25
880-10P-1.44
880-10P-1.5
880-12P-1
880-12P-1.25
880-12P-1.44
880-12P-1.5
880-9MP-IDL-1
880-9MP-IDL-1.25
880-9MP-IDL-1.44
880-9MP-IDL-1.5
880-10MP-IDL-1
880-10MP-IDL-1.25
880-10MP-IDL-1.44
880-10MP-IDL-1.5
880-11MP-IDL-1
880-11MP-IDL-1.25
880-11MP-IDL-1.44
880-11MP-IDL-1.5
880-12MP-IDL-1
880-12MP-IDL-1.25
880-12MP-IDL-1.44
880-12MP-IDL-1.5
880-10P-IDL-1
880-10P-IDL-1.25
880-10P-IDL-1.44
880-10P-IDL-1.5
880-12P-IDL-1
880-12P-IDL-1.25
880-12P-IDL-1.44
880-12P-IDL-1.5
Turning
Disk
Turning
DiskCopyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved.
41
6/05
1.00
0.81
1.25
0.75
0.20
2.24
0.75
R.
1.97
0.47
0.50
1873 GS
0.56
0.16
SC
TRAVEL
1.61
GS1 Style
Light Applications
1.61
Part
Number
Carbon
Steel
11762
11766
11730
11731
11740
11741
11763
11767
11730
11731
11740
11741
1.61
1.38
Chain Reference
Stainless
Steel
Material: "LFG Grey" Low friction acetal with thermoplastic gripper and 304 stainless pins.
6070
6070
4721
4721
TRAVEL
L
(width)
R
Min.
SC
SC
Weight
Straight Curved (lbs./ft.)
3.23
4.49
3.25
4.25
15.0
15.0
1.31 1.38
TRAVEL1.38
1.31
3.12
4.73
3.23
4.49
3.25
4.25
15.0
15.0
1.31
1.31
3.12
4.73
1.38
1.38
1.38
TRAVEL
GS2 Style
Heavy Applications
K
K
Part
Number
Carbon
Steel
11775
11779
11732
11733
11742
11743
11776
11780
11732
11733
11742
11743
1.32
Chain Reference
Stainless
Steel
1.32
1.38
Material: "LFG Grey" Low friction acetal with thermoplastic gripper and 304 stainless pins.
6070
6070
4721
4721
TRAVEL
L
(width)
R
Min.
SC
SC
Weight
Straight Curved (lbs./ft.)
3.23
4.49
3.25
4.25
15.0
15.0
1.31 1.38
TRAVEL1.38
1.31
2.72
4.33
3.23
4.49
3.25
4.25
15.0
15.0
1.31
1.31
2.72
4.33
TRAVEL
1.38
1.38
1.32
TRAVEL
GS3 Style
Special Applications
Chain Reference
Part
Number
Carbon
Steel
Material: "LFG Grey" Low friction acetal with thermoplastic gripper and 304 stainless pins.
11781
11783
11734
11735
11744
11745
Stainless
Steel
Conveyor Chains
11782
11784
11734
11735
11744
11745
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
42
TRAVEL
L
(width)
R
Min.
SC
SC
Weight
Straight Curved (lbs./ft.)
6070
6070
3.23
4.49
3.25
4.25
15.0
15.0
1.31
1.31
1.38
1.38
2.65
4.26
4721
4721
3.23
4.49
3.25
4.25
15.0
15.0
1.31
1.31
1.38
1.38
2.65
4.26
Conveyor Chains
Le
ng
th
Carry
90
Ra
90
diu
Carry
Return
Carry
Return
Return
Return
Ra
d
ius
Straight Track
Track Width
VT-973-T-18-0325
VT-973-T-24-0325
VT-973-T-18-0450
VT-973-T-24-0450
Ra
diu
s
Le
ng
th
90
3.75
90 3.75
5.0
Ra
di5.0
us
Radius
(inches)
Carry
18
24
18
Return
24
Track Width
gth
VT-973-T-S-0325-3
3.75
Carry
VT-973-T-S-0325-6
3.75
Carry
VT-973-T-S-0325-10
VT-973-T-S-0450-3
Return
VT-973-T-S-0450-6
VT-973-T-S-0450-10
Return
Return
Length
Carry (feet)
Le
Part Number
n
Corner Track
Part Number
Carry
Le
ng
th
3.75
5.0
5.0
5.0
3
6
10
3
6
10
43
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
RD=3.54
.45
.16
.12
.36
843
.94
.50
.81
.50
.31
.31
Small pitch
Reduced sprocket diameter
Easy maintenance
Removable plastic ites
High loads
Ability to start under full load
TRAVEL
Carbon Steel
Material: "XP Dark Grey" Very low friction acetal ites attached to steel roller
chain.
Stainless Steel
Conveyor Chains
Chain Reference
XP 843 K100
XP 843 K125
XP 843 K200
XP 843 K325
L
Part Number
Weight
(width)
11594
11721
11518
11519
1
1-1/4
2
3-1/4
.55
.56
.60
.69
Material: "XP Dark Grey" Very low friction acetal ites attached to stainless
steel roller chain.
Chain Reference
XP 843 SS K100
XP 843 SS K125
XP 843 SS K200
XP 843 SS K325
L
Part Number
Weight
(width)
11598
11724
11521
11522
1
1-1/4
2
3-1/4
.55
.56
.60
.69
RCBT
Roller Chain Break Tool
VG-RCBT-M
VG-RCBT-L
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
44
Conveyor Chains
.67
.23
.75
1.20
RD=4.53
.53
1.44
.16
863
.75
.47
.50
Easy maintenance
Removable plastic ites
Very high loads
Ability to start under full load
Standard Length: 10ft.
Pitches: 160
Flites: 80
TRAVEL
Stainless Steel
Carbon Steel
Material: "XP Dark Grey" Very low friction acetal ites attached to steel roller
chain.
Chain Reference
XP 863 K325
XP 863 K450
XP 863 K600
XP 863 K750
L
Part Number
Weight
(width)
11523
11524
11525
11526
3-1/4
4-1/2
6
7-1/2
1.41
1.50
1.70
1.80
Material: "XP Dark Grey" Very low friction acetal ites attached to stainless
steel roller chain.
Chain Reference
XP 863 SS K325
XP 863 SS K450
XP 863 SS K600
XP 863 SS K750
45
L
Part Number
Weight
(width)
11527
11528
11529
11530
3-1/4
4-1/2
6
7-1/2
1.41
1.50
1.70
1.80
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.37
.14
.13
SC
.43
1843
.57
RD=2.0
.50
.79
.50
1.22
.31
.31
Higher loads
Longer conveyors
Easy maintenance
Flites removable
TRAVEL
Carbon Steel
Material: "LF Brown" Low friction acetal ites attached to steel roller chain.
Chain Reference
Part Number
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
LF 1843 K125
LF 1843 K200
11543
11429
1-1/4
2
10
10
.84
.84
.88
.88
.50
.60
Material: "XP Dark Grey" Very low friction acetal ites attached to steel roller chain.
Chain Reference
Part Number
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
XP 1843 K125
XP 1843 K200
11544
11430
1-1/4
2
10
10
.84
.84
.88
.88
.50
.60
Material: "LF Brown" Low friction acetal ites attached to stainless steel roller chain.
Chain Reference
Stainless Steel
Conveyor Chains
LF 1843 SS K125
LF 1843 SS K200
Part Number
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11545
11433
1-1/4
2
10
10
.84
.84
.88
.88
.50
.60
Material: "XP Dark Grey" Very low friction acetal ites attached to stainless steel roller chain.
Chain Reference
XP 1843 SS K125
XP 1843 SS K200
Part Number
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11546
11434
1-1/4
2
10
10
.84
.84
.88
.88
.50
.60
Le eng
ng
t
th h
Carry
Carry
90
90
Return
Return
Return
Return
RR
adadi
iuuss
Corner Track
Part Number
Track Width
VT-943-T-10-0150
VT-943-T-18-0150
VT-943-T-24-0150
2
2
2
90
90
Radius
(inches)
10
18
Carry
Carry
24
diu
Copyright 2005 Solus Industrial Innovations, LLC. All Rights
RaReserved.
s
diu
Straight Track
Le L
ng en
th gtTrack Width
h
Carry
VT-943-T-S-0150-3
2
Part Number
VT-943-T-S-0150-6
VT-943-T-S-0150-10
Return
Return
Ra
Carry
Carry
6/05
46
Return
Return
2
2
Carry
Length
(feet)
10
18
24
Conveyor Chains
RD=5.25
SC
.75
.75
.82
.90
.47
1.26
.50
2.24
.56
.98
.20
.67
.16
1863
R.
TRAVEL
Carbon Steel
Material: "LF Brown" Low friction acetal ites attached to steel roller chain.
Chain Reference
Part Number
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
LF 1863 K225
11547
2-1/4
18
1.31
1.38
1.34
Material: "XP Dark Grey" Very low friction acetal ites attached to steel roller chain.
Chain Reference
Part Number
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
XP 1863 K225
11552
2-1/4
18
1.31
1.38
1.34
Stainless Steel
Material: "LF Brown" Low friction acetal ites attached to stainless steel roller chain.
Chain Reference
Part Number
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11557
2-1/4
18
1.31
1.38
1.34
LF 1863 SS K225
Material: "XP Dark Grey" Very low friction acetal ites attached to stainless steel roller chain.
Chain Reference
Part Number
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11562
2-1/4
18
1.31
1.38
1.34
XP 1863 SS K225
RCBT
Carry
90
VG-RCBT-M
VG-RCBT-L
Ra
diu
Return
Re
s
Carry
90
Return
47
Ra
diu
s
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Re
.20
RD=5.9
.56
.16
SC
.81
17
1873
Side Flexing,
Overlapping Top
Chains
.75
.75
1.00
1.25
2.24
.47
R.
.50
TRAVEL
Carbon Steel
Material: "LF Brown" Low friction acetal ites attached to steel roller chain.
Chain Reference
Part Number
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
LF 1873 K325
LF 1873 K450
LF 1873 K600
LF 1873 K750
11634
11635
11636
11637
3-1/4
4-1/2
6
7-1/2
14
14
18
18
1.31
1.31
1.31
1.31
1.38
1.38
1.38
1.38
1.41
1.50
1.61
1.74
Material: "XP Dark Grey" Very low friction acetal ites attached to steel roller chain.
Chain Reference
Part Number
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
XP 1873 K325
XP 1873 K450
XP 1873 K600
XP 1873 K750
11531
11532
11533
11534
3-1/4
4-1/2
6
7-1/2
14
14
18
18
1.31
1.31
1.31
1.31
1.38
1.38
1.38
1.38
1.41
1.50
1.61
1.74
Material: "LF Brown" Low friction acetal ites attached to stainless steel roller chain.
Chain Reference
Stainless Steel
Conveyor Chains
LF 1873 SS K325
LF 1873 SS K450
LF 1873 SS K600
LF 1873 SS K750
Part Number
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11664
11665
11666
11667
3-1/4
4-1/2
6
7-1/2
14
14
18
18
1.31
1.31
1.31
1.31
1.38
1.38
1.38
1.38
1.41
1.50
1.61
1.74
Material: "XP Dark Grey" Very low friction acetal ites attached to stainless steel roller chain.
Chain Reference
XP 1873 SS K325
XP 1873 SS K450
XP 1873 SS K600
XP 1873 SS K750
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Part Number
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11537
11538
11539
11540
3-1/4
4-1/2
6
7-1/2
14
14
18
18
1.31
1.31
1.31
1.31
1.38
1.38
1.38
1.38
1.41
1.50
1.61
1.74
48
Conveyor Chains
Track Options
for
1873 Chains
Le
ng
th
Carry
90
90
R
ad
Ra
ius
Carry
Return
Return
Return
Return
diu
s
Corner Track
Part Number
Carry
Carry
Le
ng
th
Track Width
VT-973-T-18-0325
3.75
90
VT-973-T-24-0325
3.75
90
VT-973-T-18-0450
5.0
VT-973-T-24-0450R
5.0
ad
ius 8.0
VT-973-T-18-0750
Ra
diu
VT-973-T-24-0750
8.0
s
Le
ng
th
en Track
Straight
gth
Radius Carry
(inches)
Part Number
Carry
Carry
VT-973-T-S-0325-3
VT-973-T-S-0325-6
VT-973-T-S-0325-10
Return
VT-973-T-S-0450-3
Return VT-973-T-S-0450-6
VT-973-T-S-0450-10
VT-973-T-S-0750-3
VT-973-T-S-0750-6
VT-973-T-S-0750-10
Carry 18
24 Return
18
Return
24
18
24
Track Width
Length
(feet)
3.75
3.75
3.75
5.0
5.0
5.0
8.0
8.0
8.0
3
6
10
3
6
10
3
6
10
RCBT
Roller Chain Break Tool
VG-RCBT-M
VG-RCBT-L
49
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.12
.94
Multiex Chains
.31
2.17
.45
1.97
R.
Multi-directional exibility
Horizontal or incline/decline
Small sideexing radius
High working load
Quality construction
Long wear life
Low coefcient of friction
1.97
1.42
1700
2.28
W-1700
Part Number
Min.
Radius
Breaking
Load (lbs.)
Weight
(lbs. per ft.)
11951
4.92
1910
.84
Material: "LF Brown" Low friction acetal with stainless steel pins.
LF-1700
11952
4.92
1910
.84
Material: "LF White" Low friction acetal with stainless steel pins.
LFW-1700
11953
4.92
1910
.84
2.28
.98
1702
Multiex Chains
.31
1.97
1.97
R.
1.50
2.11
Conveyor Chains
Multiex Chains
Material: "LF Brown" Low friction acetal with stainless steel pins.
Chain Reference
LF-1702
Part Number
Min.
Radius
Breaking
Load (lbs.)
Weight
(lbs. per ft.)
11954
5.51
2360
.94
Material: "LF White" Low friction acetal with stainless steel pins.
LFW-1702
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
50
11955
5.51
2360
.94
Conveyor Chains
Multiex Chains
Drive Sprocket
Options for 1700,
1702 Multiex
Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.79*
1
1-1/4
1-7/16
1-1/2
.79*
1
1-1/4
1-7/16
1-1/2
.79*
1
1-1/4
1-7/16
1-1/2
8
8
8
8
8
10
10
10
10
10
13
13
13
13
13
Machined
Split
IdlerOptions
for 1700,
1702 Multiex
Chains
Machined
Split
Part Number
Part Number
1700-8MP-.79
1700-8MP-1
1700-8MP-1.25
1700-8MP-1.44
1700-8MP-1.5
1700-10MP-.79
1700-10MP-1
1700-10MP-1.25
1700-10MP-1.44
1700-10MP-1.5
1700-13MP-.79
1700-13MP-1
1700-13MP-1.25
1700-13MP-1.44
1700-13MP-1.5
1700-8MP-IDL-1
1700-8MP-IDL-1.25
1700-8MP-IDL-1.44
1700-8MP-IDL-1.5
1700-10MP-IDL-1
1700-10MP-IDL-1.25
1700-10MP-IDL-1.44
1700-10MP-IDL-1.5
1700-13MP-IDL-1
1700-13MP-IDL-1.25
1700-13MP-IDL-1.44
1700-13MP-IDL-1.5
51
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.98
1701 TAB
.18
2.28
.24
Multiex Chains
2.60
1.97
R.
Multi-directional exibility
Horizontal or incline/decline
Small sideexing radius
High working load
Quality construction
Long wear life
Low coefcient of friction
1.97
1.42
.31
2.17
Material: "LF Brown" Low friction acetal with stainless steel pins.
Chain Reference
LF-1701 TAB
Part Number
Min.
Radius
Breaking
Load (lbs.)
Weight
(lbs. per ft.)
11956
5.31
1910
.97
2.28
Multiex Chains
.98
1701 TAB OP
.24
2.60
.31
1.97
1.97
R.
1.42
2.11
Conveyor Chains
Multiex Chains
Material: "LF Brown" Low friction acetal with stainless steel pins.
Chain Reference
LF-1701 TAB OP
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
52
Part Number
Min.
Radius
Breaking
Load (lbs.)
Weight
(lbs. per ft.)
11958
4.92
1910
.94
Conveyor Chains
Multiex Chains
Drive Sprocket
Options for 1701 TAB,
1702 TAB OP
Machined
Multiex Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.79*
1
1-1/4
1-7/16
1-1/2
.79*
1
1-1/4
1-7/16
1-1/2
.79*
1
1-1/4
1-7/16
1-1/2
8
8
8
8
8
10
10
10
10
10
13
13
13
13
13
Split
Machined
Split
Part Number
Part Number
1700-8MP-.79
1700-8MP-1
1700-8MP-1.25
1700-8MP-1.44
1700-8MP-1.5
1700-10MP-.79
1700-10MP-1
1700-10MP-1.25
1700-10MP-1.44
1700-10MP-1.5
1700-13MP-.79
1700-13MP-1
1700-13MP-1.25
1700-13MP-1.44
1700-13MP-1.5
1700-8MP-IDL-.79
1700-8MP-IDL-1
1700-8MP-IDL-1.25
1700-8MP-IDL-1.44
1700-8MP-IDL-1.5
1700-10MP-IDL-.79
1700-10MP-IDL-1
1700-10MP-IDL-1.25
1700-10MP-IDL-1.44
1700-10MP-IDL-1.5
1700-13MP-IDL-.79
1700-13MP-IDL-1
1700-13MP-IDL-1.25
1700-13MP-IDL-1.44
1700-13MP-IDL-1.5
53
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.43
1.12
CC 600
.57
2.50
1.65
2.50
R.
CC-600
Part Number
Min.
Radius
Breaking
Load (lbs.)
Weight
(lbs. per ft.)
11007
27.55
3147
.89
.43
.57
CC 600 TAB
1.12
.67
2.13
2.50
2.50
R.
Conveyor Chains
3.54
TRAVEL
CC-600 TAB
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
54
Part Number
Min.
Radius
Breaking
Load (lbs.)
Weight
(lbs. per ft.)
11009
27.55
3147
1.0
Conveyor Chains
.37
1.52
.75
CC 1400
These chains transport plastic crates, or can
be used for general purpose conveying applications. They feature high strength, curving
radius capability, uniform matte nish, and
very high wear resistance.
3.25
3.25
4.65
R.
1.97
TRAVEL
CC-1400
Part Number
Min.
Radius
Breaking
Load (lbs.)
Weight
(lbs. per ft.)
11008
25.98
4046
2.17
1.52
.75
.77
.37
CC 1400 TAB
3.25
3.25
1.97
R.
2.58
4.65
TRAVEL
Part Number
Min.
Radius
Breaking
Load (lbs.)
Weight
(lbs. per ft.)
CC 1400 TAB
11010
25.98
4046
2.31
55
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.50
.25
.19
.76
5.37
5.50
1.50
1.50
.25
1.50
T
R
A
V
E
L
.19
.76
.37
.89
.31
5.37
5.50
LBP
1.50 821 K750
11055
5.37
1866
7.50
1.50
1.50
5.37
5.50
7.50
.19
.43
Weight
(lbs./ft.)
7-1/2
3.71
5.50
.43
T
R
A
V
E
L
L
(width)
T
R
A
V
E
L
.19
.76
.37
1.13
.89
.31
.76
.37
1.50
RD=16
.25
1.13
Breaking
Load (lbs.)
.76
Part
Number
.37
Chain Reference
.89
.31
.25
7.50
T
R
A
Material: "LFG Dark Grey"
chain.
V Low friction acetal 5.37
1.50
1.50
E
with austenitic steel
pins.
5.50
.25 Water blue acetal resin rollers
L
1.13
RD=16
.31
.89
Ideal for the food and beverage industry packaging line and general purpose conveying applications to reduce pressure created between product
and ite surface. The small width rollers provide a
stable conveying surface and enable the product
to be handled without damage, while continuing a
positive forward motion.
.43
RD=16
.25
1.50
.43
.19
.76
5.37 10.00
5.50
.76
.37
1.50
1.13
.89
.31
.43
5.37
5.50
1.50
RD=16
.25
.19
T
R
A
V
E
L
Chain
R Reference
Part
Number
11056
1.50
E
L
Breaking
Load (lbs.)
5.37
10.00
5.501866
.43
.31
.89
.37
1.50
1.13
1.50
10.00
.76
.37
.89
.31
.25
1.13
RD=16
RD=16
L
(width)
Weight
(lbs./ft.)
10
4.64
1.50
T
R
A
V
E
L
.43
.19
12.00
.76
.37
.31
1.50
1.13
RD=16
.25
5.37
5.50
12.00
T
R
A
V
E
L
12.00
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
56
.19
Heavy duty
High load
Low Noise Rollers
Reduced back-line pressure
1.13
.43
RD=16
.19
1.13
.37
.31
.89
LBP 821
.43
RD=16
.89
Conveyor Chains
Chain Reference
Part
Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs./ft.)
11057
1866
12
5.37
Conveyor Chains
Drive Sprocket
Options for LPB
821 Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
21
21
21
21
21
23
23
23
23
23
25
25
25
25
25
27
27
27
27
27
Machined
Split
Idler Options
for LPB 821
Chains
Machined
Split
Part Number
Part Number
821-21MP-.71
821-21MP-1
821-21MP-1.25
821-21MP-1.44
821-21MP-1.5
821-23MP-.71
821-23MP-1
821-23MP-1.25
821-23MP-1.44
821-23MP-1.5
821-25MP-.71
821-25MP-1
821-25MP-1.25
821-25MP-1.44
821-25MP-1.5
821-27MP-.71
821-27MP-1
821-27MP-1.25
821-27MP-1.44
821-27MP-1.5
821-21MP-IDL-1
821-21MP-IDL-1.25
821-21MP-IDL-1.44
821-21MP-IDL-1.5
821-23MP-IDL-1
821-23MP-IDL-1.25
821-23MP-IDL-1.44
821-23MP-IDL-1.5
821-25MP-IDL-1
821-25MP-IDL-1.25
821-25MP-IDL-1.44
821-25MP-IDL-1.5
821-27MP-IDL-1
821-27MP-IDL-1.25
821-27MP-IDL-1.44
821-27MP-IDL-1.5
57
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
LBP 831
High load
Low Noise Rollers
Reduced back-line pressure
1.66
.85
.28
.34
1.10
.43
RD=15.75
.19
.76
1.50
1.50
1.73
.25
Ideal for the food and beverage industry packaging line and general purpose conveying applications to reduce pressure created between product
and ite surface. The small width rollers provide a
stable conveying surface and enables the product
to be handled without damage, while continuing a
positive forward motion.
Conveyor Chains
TRAVEL
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
58
Chain Reference
Part
Number
Breaking
Load (lbs.)
L
(width)
Weight
(lbs./ft.)
11053
11054
1124
1124
3-1/4
4-1/2
1.45
1.92
Conveyor Chains
Idler Options
for LBP 831 Chains
Machined
Split
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
Part Number
Part Number
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
820-19MP-.71
820-19MP-1
820-19MP-1.25
820-19MP-1.44
820-19MP-1.5
820-21MP-.71
820-21MP-1
820-21MP-1.25
820-21MP-1.44
820-21MP-1.5
820-23MP-.71
820-23MP-1
820-23MP-1.25
820-23MP-1.44
820-23MP-1.5
820-25MP-.71
820-25MP-1
820-25MP-1.25
820-25MP-1.44
820-25MP-1.5
820-27MP-.71
820-27MP-1
820-27MP-1.25
820-27MP-1.44
820-27MP-1.5
820-21P-1
820-21P-1.25
820-21P-1.44
820-21P-1.5
820-23P-1
820-23P-1.25
820-23P-1.44
820-23P-1.5
820-25P-1
820-25P-1.25
820-25P-1.44
820-25P-1.5
-
820-19MP-IDL-1
820-19MP-IDL-1.25
820-19MP-IDL-1.44
820-19MP-IDL-1.5
820-21MP-IDL-1
820-21MP-IDL-1.25
820-21MP-IDL-1.44
820-21MP-IDL-1.5
820-23MP-IDL-1
820-23MP-IDL-1.25
820-23MP-IDL-1.44
820-23MP-IDL-1.5
820-25MP-IDL-1
820-25MP-IDL-1.25
820-25MP-IDL-1.44
820-25MP-IDL-1.5
820-27MP-IDL-1
820-27MP-IDL-1.25
820-27MP-IDL-1.44
820-27MP-IDL-1.5
820-21P-IDL-1
820-21P-IDL-1.25
820-21P-IDL-1.44
820-21P-IDL-1.5
820-23P-IDL-1
820-23P-IDL-1.25
820-23P-IDL-1.44
820-23P-IDL-1.5
820-25P-IDL-1
820-25P-IDL-1.25
820-25P-IDL-1.44
820-25P-IDL-1.5
-
815-21LF-IDL-1
815-21LF-IDL-1.25
815-21LF-IDL-1.44
815-21LF-IDL-1.5
815-23LF-IDL-1
815-23LF-IDL-1.25
815-23LF-IDL-1.44
815-23LF-IDL-1.5
815-25LF-IDL-1
815-25LF-IDL-1.25
815-25LF-IDL-1.44
815-25LF-IDL-1.5
-
815-21-IDL-1
815-21-IDL-1.25
815-21-IDL-1.44
815-21-IDL-1.5
815-25-IDL-1
815-25-IDL-1.25
815-25-IDL-1.44
815-25-IDL-1.5
-
19
19
19
19
19
21
21
21
21
21
23
23
23
23
23
25
25
25
25
25
27
27
27
27
27
Low-Friction
Molded
Molded
Split
59
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
RD=15.75
.76
.37
SC
Ideal for the food and beverage industry packaging line and general purpose conveying applications to reduce pressure created between product
and ite surface. The small width rollers provide a
stable conveying surface and enable the product
to be handled without damage, while continuing a
positive forward motion.
.87
.87
1.50
.68
1.50
2.23
2.99
.19
1.50
.76
.37
1.50
.37.68
SC
.19
RD=15.75
.37
1.63
1.63
High load
Low Friction Rollers
Low Noise Rollers
1.06
1.06
2.23
2.99
T
R
A
V
E
T
L
R
A
V
E
L
Material: "LFG Grey" Low friction acetal chain. Water blue acetal resin rollers with austenitic steel pins.
R
Min.
2248
3-3/4
24
2.36
SC
2.28
1.50
1.50
2.23
2.99
.19
1.50
2.22
.87
.19
SC
.76
.37
1.50
Weight
(lbs. per ft.)
.87
.76
RD=15.75
1.06
3.75
SC
SC
Straight Curved
.37
L
(width)
.37
1.63
1.63
Breaking
Load (lbs.)
.37.68
Part Number
.68
Chain Reference
1.06
Conveyor Chains
2.23
2.99
T
R
A
V
E
T
L
R
A
V
E
L
4.50
4.50
Material: "LFG Grey" Low friction acetal chain. Water blue acetal resin rollers with austenitic steel pins.
Chain Reference
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
60
Part Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11071
2248
4-1/2
24
2.36
2.28
2.71
Conveyor Chains
Drive Sprocket
Options for LPB
882 TAB Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
Machined
Split
Idler Options
for LPB 882
TAB Chains
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
882-9MP-.71
882-9MP-1
882-9MP-1.25
882-9MP-1.44
882-9MP-1.5
882-10MP-.71
882-10MP-1
882-10MP-1.25
882-10MP-1.44
882-10MP-1.5
882-11MP-.71
882-11MP-1
882-11MP-1.25
882-11MP-1.44
882-11MP-1.5
882-12MP-.71
882-12MP-1
882-12MP-1.25
882-12MP-1.44
882-12MP-1.5
882-10P-1
882-10P-1.25
882-10P-1.44
882-10P-1.5
882-12P-1
882-12P-1.25
882-12P-1.44
882-12P-1.5
882-9MP-IDL-1
882-9MP-IDL-1.25
882-9MP-IDL-1.44
882-9MP-IDL-1.5
882-10MP-IDL-1
882-10MP-IDL-1.25
882-10MP-IDL-1.44
882-10MP-IDL-1.5
882-11MP-IDL-1
882-11MP-IDL-1.25
882-11MP-IDL-1.44
882-11MP-IDL-1.5
882-12MP-IDL-1
882-12MP-IDL-1.25
882-12MP-IDL-1.44
882-12MP-IDL-1.5
882-10P-IDL-1
882-10P-IDL-1.25
882-10P-IDL-1.44
882-10P-IDL-1.5
882-12P-IDL-1
882-12P-IDL-1.25
882-12P-IDL-1.44
882-12P-IDL-1.5
Le
ng
th
Carry
Carry
90
Ra
Le
ng
th
Return
Carry
diu
s
90
Return
Straight Track
Return
Ra
diu
s
Carry
90
Track Width
VT-982-T-24-0450
VT-982-T-24-0750
Ra 90
diu
s
Ra
diu
s
Le
ng
th
Part Number
Corner Track
Part Number
Carry
Return
5.0
8.0
VT-982-T-S-0450-3
Le
ng
th
VT-982-T-S-0450-6
Carry
Track Width
5.0
5.0
VT-982-T-S-0450-10 Carry 5.0
VT-982-T-S-0750-3
8.0
Return
VT-982-T-S-0750-6
8.0
VT-982-T-S-0750-10
8.0
Radius
(inches)
Return
24
Carry
24
Return
See all ValuTrac
modules on pages
70-85
61
Length
(feet)
3
6
10
3
6
10
Return
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.50
.87
R.
2.23
3.0
1.50
R.
RD=15.75
2.23
chain.3.0
Water
11072
1.50
2248
1.50
7-1/2
7.50
R.
SC
.76
.19
.37
1.63
1.06
RD=15.75
1.50
1.50
.68
.76
.19
10.0
2.23
3.0
RD=15.75
1.50
T
R
A
V
E
L
SC
.76
.19
.37
1.63
1.06
R.
1.50
1.50
10.0
RD=15.75
R.
LBP 882
TAB K1000
1.50
1.50
11069
.19
.76
Breaking
L
Part Number Load (lbs.) (width)
Chain Reference
.37
2248
10
10.0
RD=15.75
2.23
3.0
T
R
A
austenitic
steel pins.
V
E
SC L
Weight
R
Min.
SC
Straight Curved (lbs. per ft.)
24
2.40
2.23
3.0
2.36
3.97
.37
.19
.76
.68
R.
SC
1.50
.87
1.63
1.06
Material: "LFG Grey" Low friction acetal chain. Water blue acetal resin SC
rollers with
1.50
12.0
2.23
3.0
R.
12.0
T
R
A
V
E
L
12.0
Material: "LFG Grey" Low friction acetal chain. Water blue acetal resin rollers with austenitic steel pins.
Chain Reference
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
T
R
A
V
E
L
R.
SC
.37
1.50
3.16
3.0
2.23
3.0
7.50
RD=15.75
1.63
1.06
24
SC
SC
Weight
Straight Curved (lbs. per ft.)
.68
.37
R
Min.
steel pins.
.87
.76
Breaking
L
Part Number Load (lbs.) (width)
Chain Reference
.19
1.63
1.06
R.
T
R
A
with austenitic
V
SC
E
L
.68
.87
7.50
1.50
.68
1.50
.87
.19
.76
.68
SC
.37
T
R
A
V
E
L
.87
1.50
.87
.19
.76
.68
SC
.37
1.63
1.06
RD=15.75
High load
Low Friction Rollers
Low Noise Rollers
1.63
1.06
2.23
3.0
1.50
.87
.68
.76
.19
SC
.37
1.63
1.06
RD=15.75
1.63
1.06
Conveyor Chains
62
Breaking
L
Part Number Load (lbs.) (width)
11068
2248
12
R
Min.
24
SC
SC
Weight
Straight Curved (lbs. per ft.)
2.40
2.36
4.37
T
R
A
V
E
L
Conveyor Chains
Drive Sprocket
Options for LPB
882 TAB Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
Machined
Split
Idler Options
for LPB 882
TAB Chains
Molded
Split
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
882-9MP-.71
882-9MP-1
882-9MP-1.25
882-9MP-1.44
882-9MP-1.5
882-10MP-.71
882-10MP-1
882-10MP-1.25
882-10MP-1.44
882-10MP-1.5
882-11MP-.71
882-11MP-1
882-11MP-1.25
882-11MP-1.44
882-11MP-1.5
882-12MP-.71
882-12MP-1
882-12MP-1.25
882-12MP-1.44
882-12MP-1.5
882-10P-1
882-10P-1.25
882-10P-1.44
882-10P-1.5
882-12P-1
882-12P-1.25
882-12P-1.44
882-12P-1.5
882-9MP-IDL-1
882-9MP-IDL-1.25
882-9MP-IDL-1.44
882-9MP-IDL-1.5
882-10MP-IDL-1
882-10MP-IDL-1.25
882-10MP-IDL-1.44
882-10MP-IDL-1.5
882-11MP-IDL-1
882-11MP-IDL-1.25
882-11MP-IDL-1.44
882-11MP-IDL-1.5
882-12MP-IDL-1
882-12MP-IDL-1.25
882-12MP-IDL-1.44
882-12MP-IDL-1.5
882-10P-IDL-1
882-10P-IDL-1.25
882-10P-IDL-1.44
882-10P-IDL-1.5
882-12P-IDL-1
882-12P-IDL-1.25
882-12P-IDL-1.44
882-12P-IDL-1.5
Le
ng
th
Carry
Carry
90
Ra
Le
ng
th
Return
Carry
diu
s
90
Return
Straight Track
Return
Ra
diu
s
Carry
90
Track Width
VT-982-T-24-0450
VT-982-T-24-0750
Ra 90
diu
s
Ra
diu
s
Le
ng
th
Part Number
Corner Track
Part Number
Carry
Return
5.0
8.0
VT-982-T-S-0450-3
Le
ng
th
VT-982-T-S-0450-6
Carry
Track Width
5.0
5.0
VT-982-T-S-0450-10 Carry 5.0
VT-982-T-S-0750-3
8.0
Return
VT-982-T-S-0750-6
8.0
VT-982-T-S-0750-10
8.0
Radius
(inches)
Return
24
Carry
24
Return
See all ValuTrac
modules on pages
70-85
63
Length
(feet)
3
6
10
3
6
10
Return
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
2.24
SC
RD=15.75
R.
.37
1.50
2.24
.56
1.50
1.32
.76
.37
.31
High load
Low Friction, Low Noise Rollers
Pin Roller Support added to maintain a at and
consistent carrying surface
Easy Maintenance
.56
1.50
.19
1.32
.76
1.50
.37
.37
.31
LBP 882 M
.19
RD=15.75
SC
T
R
A
V
E
L
R.
1.50
7.50
2.24
SC
RD=15.75"LFG Grey" Low friction acetal chain. Water blue acetal resin rollers with austenitic steel
Material:
11073
2248
7-1/2
SC
SC
Weight
Straight Curved (lbs. per ft.)
1.32
R
Min.
242.24 2.40
7.50
2.36
SC
RD=15.75
.37
1.50
2.24
SC
R.
.56
.37
1.50
7.50
SC
1.32
2.24
SC
10.00
T
R
.19
R.
Material: "LFG Grey" Low friction acetal chain. Water
blue acetal resin rollers with austenitic steel pins.
A
882
1.50M K1000
11074
2248
2.24
10
24
SC
V
E
SC
SC
Weight L
Straight Curved (lbs. per ft.)
1.32
R
Min.
2.40
2.36
3.33
.56
LBP
1.50
.37
Chain Reference
Breaking
L
Part Number Load (lbs.) (width)
.37
.31
T
R
A
V
E
L
.56
1.50
.76
RD=15.75
.37
.37
.31
.76
R.
1.50
T
R
A
V
E
L
1.32
.56
10.00
2.24
.19
RD=15.75
1.50
.37
.37
.31
.76
.19
RD=15.75
1.50
T
R
A
V
E
L
1.32
.76
.19
R.
2.62
.56
.76
LBP 882 M
K7501.50
1.50
.37
.37
Chain Reference
.31
.31
R.
Breaking
L
Part Number Load (lbs.) (width)
T
R
A
V
pins.
E
L
.19 .56
.37
1.50
1.32
.76
.37
.31
.19
RD=15.75
10.00
R.
12.00
2.24
.56
1.50
.37
.37
1.50
T
R
A
V
E
L
1.32
.76
.19
RD=15.75
.31
Conveyor Chains
SC
R.
T
R
A
V
E
L
12.00
T
R
A
V
E
L
12.00
Material: "LFG Grey" Low friction acetal chain. Water blue acetal resin rollers with austenitic steel pins.
Chain Reference
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
64
Breaking
L
Part Number Load (lbs.) (width)
11075
2248
12
R
Min.
24
SC
SC
Weight
Straight Curved (lbs. per ft.)
2.40
2.36
3.93
Conveyor Chains
Drive Sprocket
Options for LPB
882 M Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
Machined
Split
Molded
Split
Idler Options
for LPB 882 M
Chains
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
882-9MP-.71
882-9MP-1
882-9MP-1.25
882-9MP-1.44
882-9MP-1.5
882-10MP-.71
882-10MP-1
882-10MP-1.25
882-10MP-1.44
882-10MP-1.5
882-11MP-.71
882-11MP-1
882-11MP-1.25
882-11MP-1.44
882-11MP-1.5
882-12MP-.71
882-12MP-1
882-12MP-1.25
882-12MP-1.44
882-12MP-1.5
882-10P-1
882-10P-1.25
882-10P-1.44
882-10P-1.5
882-12P-1
882-12P-1.25
882-12P-1.44
882-12P-1.5
882-9MP-IDL-1
882-9MP-IDL-1.25
882-9MP-IDL-1.44
882-9MP-IDL-1.5
882-10MP-IDL-1
882-10MP-IDL-1.25
882-10MP-IDL-1.44
882-10MP-IDL-1.5
882-11MP-IDL-1
882-11MP-IDL-1.25
882-11MP-IDL-1.44
882-11MP-IDL-1.5
882-12MP-IDL-1
882-12MP-IDL-1.25
882-12MP-IDL-1.44
882-12MP-IDL-1.5
882-10P-IDL-1
882-10P-IDL-1.25
882-10P-IDL-1.44
882-10P-IDL-1.5
882-12P-IDL-1
882-12P-IDL-1.25
882-12P-IDL-1.44
882-12P-IDL-1.5
65
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.80
.61
1.37
.43
.33
RD=15
.82
.19
.46
1.50
1.69
1.50
1.50
2.43
Ideal for the food and beverage industry packaging line (PET bottle packs in heat shrink lm)
and general purpose conveying applications to
reduce pressure created between product and
ite surface. The small width rollers provide a
stable conveying surface and enable the product
to be handled without damage, while continuing a
positive forward motion.
R.
3.25
Conveyor Chains
TRAVEL
Material: "LFG Grey" Low friction acetal chain. Water blue acetal resin rollers.
Chain Reference
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
66
Part Number
Breaking
Load (lbs.)
L
(width)
R
Min.
SC
Straight
SC
Curved
Weight
(lbs. per ft.)
11388
1349
3-1/4
7.87
1.81
1.77
2.15
Conveyor Chains
Drive Sprocket
Options for LPB
878 TAB Chains
Shaft Sized Teeth or
Bore Dia.
Equivalent
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
Machined
Split
Molded
Split
Idler Options
for LPB 878
TAB Chains
Machined
Split
Molded
Split
Part Number
Part Number
Part Number
Part Number
880-9MP-.71
880-9MP-1
880-9MP-1.25
880-9MP-1.44
880-9MP-1.5
880-10MP-.71
880-10MP-1
880-10MP-1.25
880-10MP-1.44
880-10MP-1.5
880-11MP-.71
880-11MP-1
880-11MP-1.25
880-11MP-1.44
880-11MP-1.5
880-12MP-.71
880-12MP-1
880-12MP-1.25
880-12MP-1.44
880-12MP-1.5
880-10P-1
880-10P-1.25
880-10P-1.44
880-10P-1.5
880-12P-1
880-12P-1.25
880-12P-1.44
880-12P-1.5
880-9MP-IDL-1
880-9MP-IDL-1.25
880-9MP-IDL-1.44
880-9MP-IDL-1.5
880-10MP-IDL-1
880-10MP-IDL-1.25
880-10MP-IDL-1.44
880-10MP-IDL-1.5
880-11MP-IDL-1
880-11MP-IDL-1.25
880-11MP-IDL-1.44
880-11MP-IDL-1.5
880-12MP-IDL-1
880-12MP-IDL-1.25
880-12MP-IDL-1.44
880-12MP-IDL-1.5
880-10P-IDL-1
880-10P-IDL-1.25
880-10P-IDL-1.44
880-10P-IDL-1.5
880-12P-IDL-1
880-12P-IDL-1.25
880-12P-IDL-1.44
880-12P-IDL-1.5
Turning
Disk
Turning Disk
67
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.43
.85
LBP 2120
Flat Top Belts with
Accumulation Rollers
W
6.70
.34
.50
3.35
Conveyor Chains
.17
Material: "LF Dark Grey" Low friction acetal belt. Green acetal resin rollers with stainless steel roller shaft.
Chain Reference
Part Number
Width
(in.)
LBP 2120-0085
LBP 2120-0170
LBP 2120-0255
LBP 2120-0340
LBP 2120-0425
LBP 2120-0510
LBP 2120-0595
LBP 2120-0680
LBP 2120-0765
LBP 2120-0850
LBP 2120-0935
LBP 2120-1020
LBP 2120-1105
LBP 2120-1190
LBP 2120-1275
LBP 2120-1360
LBP 2120-1445
LBP 2120-1530
LBP 2120-1615
LBP 2120-1700
256500
256501
256502
256503
256504
256505
256506
256507
256508
256509
256510
256511
256512
256513
256514
256515
256516
256517
256518
256519
4
7
10
14
17
20
24
27
30
34
37
40
44
47
50
54
57
60
64
67
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
68
Chain Reference
Part Number
Width
(in.)
LBP 2120-1785
LBP 2120-1870
LBP 2120-1955
LBP 2120-2040
LBP 2120-2125
LBP 2120-2210
LBP 2120-2295
LBP 2120-2380
LBP 2120-2465
LBP 2120-2550
LBP 2120-2635
LBP 2120-2720
LBP 2120-2805
LBP 2120-2890
LBP 2120-2975
LBP 2120-3060
LBP 2120-3145
LBP 2120-3230
LBP 2120-3315
LBP 2120-3400
256520
256521
256522
256523
256524
256525
256526
256527
256528
256529
256530
256531
256532
256533
256534
256535
256536
256537
256538
256539
70
74
77
80
84
87
90
94
97
100
104
107
110
114
117
120
124
127
130
134
Min.
Breaking
Weight
Radius Load (lbs.) (lbs. per ft.)
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
9.85
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
1370
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
70
DynaPlate
& Modular
Transfer Plates Page
ValuFlex Page
Serpentine Return System
UHMW profiles
Chain Return Shoes
Spacers
SnapLock Clips
PinchLock Clips
Cross Rods
Sprockets Page
Split Sprockets
Heavy Duty & molded
Idler Wheels
86
109
100
115
122
Chain Guides
and Wear Strips
TM
Proprietry
A4 UHMW
Nylatron
Nolu-S
0.24 +- 0.03
NA
0.22 +- 0.01
0.18 +- 0.01
.20
0.15 +- 0.01
Acetal chain
static friction
0.18 +- 0.01
NA
0.15 +- 0.01
Acetal chain
dynamic friction
0.17 +- 0.01
.25
0.14 +- 0.01
160/180F
220F
160F
Maximum, continuous
operating temperature
Cost Savings
The modular design of ValuTrac significantly reduces fabrication
time. Fewer parts require fewer fasteners, fewer connections and
fewer supports. The result is an overall time and cost savings.
Selection of Materials
Tab Style
Width
"T" series
Height
Tab Carry-way
"T" series
Tab Return-way
Height
ValuTrac for tab style chains is the same for carry-way or return-way.
VG-212 series
adjusting rod
See Related
Products
VG-SSR
VG-011-01
d
nde
me g
m
co
tin
Re Moun
VG-210
series bracket
support bar
Recommended
Mounting
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
70
ValuTrac
NOLU-S
NOLU-SR
NYLATRON
Nolu-BR UHMW is
our standard track
material. It is a
proprietary blend of
resins and reground
UHMW that maximizes wear and friction properties for
most applications.
Nolu-S is a patented
alloy of UHMW and
other dry lubricants
that maintains good
wear characteristics
while significantly
reducing the track's
coefficient of friction.
Nolu-SR combines
the Nolu-S features
with a much harder,
longer wearing
composition which
can be used in some
high-speed/highload applications
previously requiring
Nylatron.
Nylatron is an
extremely hard
plastic which has
characteristics
allowing it to be
used in high-speed/
high-load applications or those involving abrasives.
Radius
Nolu-BR
Part Number
Nolu-S
Part Number
Nolu-SR
Part Number
Nylatron
Part Number
18
VT-980-T-18-0325
VT-S-980-T-18-0325
VT-SR-980-T-18-0325
VT-N-980-T-18-0325
24
VT-980-T-24-0325
VT-S-980-T-24-0325
VT-SR-980-T-24-0325
VT-N-980-T-24-0325
90
Ra
diu
Chain Number
Track
Width
Track
Height
879TAB-K3-1/4
880TAB-K3-1/4
881TAB-K3-1/4
3.75
879TAB-K4-1/2
880TAB-K4-1/2
881TAB-K4-1/2
24
VT-980-T-24-0450
VT-S-980-T-24-0450
VT-SR-980-T-24-0450
VT-N-980-T-24-0450
881TAB-K7-1/2
24
VT-981-T-24-0750
VT-S-981-T-24-0750
VT-SR-981-T-24-0750
VT-N-981-T-24-0750
882TAB-K4-1/2
1.188
24
VT-982-T-24-0450
VT-S-982-T-24-0450
VT-SR-982-T-24-0450
VT-N-982-T-24-0450
882TAB-K7-1/2
1.188
24
VT-982-T-24-0750
VT-S-982-T-24-0750
VT-SR-982-T-24-0750
VT-N-982-T-24-0750
10
VT-943-T-10-0150
18
VT-943-T-18-0150
24
VT-943-T-24-0150
18
VT-973-T-18-0325
VT-S-973-T-18-0325
VT-SR-973-T-18-0325
VT-N-973-T-18-0325
24
VT-973-T-24-0325
VT-S-973-T-24-0325
VT-SR-973-T-24-0325
VT-N-973-T-24-0325
18
VT-973-T-18-0450
24
VT-973-T-24-0450
VT-S-973-T-24-0450
VT-SR-973-T-24-0450
18
VT-973-T-18-0750
24
VT-973-T-24-0750
VT-S-973-T-24-0750
VT-SR-973-T-24-0750
12
VT-901-T-12-0209
18
VT-901-T-18-0209
24
VT-901-T-24-0209
1843
1873-K3-1/4
1874-K3-1/4
3.75
1873-K4-1/2
1874-K4-1/2
1873-K7-1/2
1874-K7-1/2
1701TAB
Carry or
Return
1.375
1.375
1.375
3.25
1.25
Chain Number
ValuTrac Module
Chain number
ValuTrac Module
1843
1843G
943-T series
879TAB-
1701TAB
1873-
901-T series
880TAB980-T- series
age
See p ustom
c
r
78 fo ordering
le
modutructions.
ins
1874-
1873G
1874G
973-T- series
881TAB-K3, 4
881TAB-K7
882TAB-
LBP882T-
882G
982-T- series
981-T- series
NOTE: Specialty chain styles such as gripper and low back pressure use the same ValuTrac module as
the standard sideflexing counterpart. Example: Chain no. 1873G (gripper style) uses the same module as
standard chain no. 1873-. For 815, 820, or 831 style chain, use ValuTrac part number VT-980-T-.
* These ValuTrac modules are commonly used on side gripping, elevator/lowerator systems.
71
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
TM
ValuTrac
Le
ng
TM
Chain Guides
and Wear Strips
th
Chain Number
879TAB-K3-1/4
880TAB-K3-1/4
881TAB-K3-1/4
879TAB-K4-1/2
880TAB-K4-1/2
881TAB-K4-1/2
881TAB-K7-1/2
882TAB-K4-1/2
882TAB-K7-1/2
1843
1873-K3-1/4,
1874-K3-1/4
1873-K4-1/2,
1874-K4-1/2
1873-K7-1/2,
1874-K7-1/2
1701TAB
Track Width
3.75
3.75
3.25
Track Height
1.188
1.188
1.375
1.375
1.375
1.25
NOLU-S
Nolu-S is a patented alloy of
UHMW and other dry lubricants
that maintains good wear characteristics while significantly
reducing the track's coefficient
of friction.
Length in Feet
VT-980-T-S-0325-3
VT-S-980-T-S-0325-3
VT-980-T-S-0325-6
VT-S-980-T-S-0325-6
10
VT-980-T-S-0325-10
VT-S-980-T-S-0325-10
VT-980-T-S-0450-3
VT-S-980-T-S-0450-3
VT-980-T-S-0450-6
VT-S-980-T-S-0450-6
10
VT-980-T-S-0450-10
VT-S-980-T-S-0450-10
VT-981-T-S-0750-3
VT-S-981-T-S-0750-3
VT-981-T-S-0750-6
VT-S-981-T-S-0750-6
10
VT-981-T-S-0750-10
VT-S-981-T-S-0750-10
VT-982-T-S-0450-3
VT-S-982-T-S-0450-3
VT-982-T-S-0450-6
VT-S-982-T-S-0450-6
10
VT-982-T-S-0450-10
VT-S-982-T-S-0450-10
VT-982-T-S-0750-3
VT-S-982-T-S-0750-3
VT-982-T-S-0750-6
VT-S-982-T-S-0750-6
10
VT-982-T-S-0750-10
VT-S-982-T-S-0750-10
VT-943-T-S-0150-3
VT-943-T-S-0150-6
10
VT-943-T-S-0150-10
VT-973-T-S-0325-3
VT-S-973-T-S-0325-3
VT-973-T-S-0325-6
VT-S-973-T-S-0325-6
10
VT-973-T-S-0325-10
VT-S-973-T-S-0325-10
VT-973-T-S-0450-3
VT-973-T-S-0450-6
10
VT-973-T-S-0450-10
VT-973-T-S-0750-3
VT-973-T-S-0750-6
10
VT-973-T-S-0750-10
VT-901-T-S-0209-3
VT-901-T-S-0209-6
10
VT-901-T-S-0209-10
Carry or Return
NOLU-BR
Nolu-BR UHMW is our standard
track material. It is a proprietary
blend of resins and reground
UHMW that maximizes wear
and friction properties for most
applications.
*These ValuTrac modules are commonly used on side gripping, elevator/lowerator systems.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
72
ValuTrac
Bevel Style
"B" series
Height
Bevel Carry-way
Bevel Return-way
Height
"R" series
(2 pieces
included)
Chain Guides
and Wear Strips
Width
Support
plate
spacing*
5/8"
Support Plate
ValuTrac for bevel chains use a 1 piece track for carry-ways. Returnways consist of 2 pieces, the track and a 5/8" thick chain support plate.
7
NOLU-BR
Nolu-BR UHMW is
our standard track
material. It is a
proprietary blend of
resins and reground
UHMW that
maximizes wear and
friction properties for
most applications.
* Support plate spacing: 879=( /32") 880=( /16") 881=( /32") 882=( /32")
TM
Chain Number
879-K3-1/4
880-K3-1/4
881-K3-1/4
Track
Width
Track
Height
Carry or
Return
carry
3.75
Ra
diu
879-K4-1/2
880-K4-1/2
881-K4-1/2
Nolu-BR
Part Number
18
VT-980-B-18-0325
24
VT-980-B-24-0325
18
VT-980-R-18-0325
24
VT-980-R-24-0325
1
return
90
Radius
VT-980-B-24-0450
carry
5
24
VT-980-R-24-0450
return
VT-981-B-24-0750
carry
881-K7-1/2
24
VT-981-R-24-0750
return
VT-982-B-24-0450
carry
882-K4-1/2
24
1.188
VT-982-R-24-0450
return
VT-982-B-24-0750
carry
24
1.188
VT-982-R-24-0750
return
Note: Because the bottom dimensions of the 879, 880 and 881 chains are the same
for widths up to 4", the VT-980 track is used for all three chains.
73
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
ValuTrac
TM
Le
Chain Guides
and Wear Strips
ng
th
Track
Width
Chain Number
Track
Height
Carry or
Return
carry
879-K3-1/4
880-K3-1/4
881-K3-1/4
Valu Guide
RH- series
ratchet handle
NOLU-BR
Straight Sections
for Bevel Chain
3.75
Nolu-BR
Part Number
VT-980-B-S-0325-3
VT-980-B-S-0325-6
10
VT-980-B-S-0325-10
VT-980-R-S-0325-3
VT-980-R-S-0325-6
10
VT-980-R-S-0325-10
VT-980-B-S-0450-3
VT-980-B-S-0450-6
10
VT-980-B-S-0450-10
VT-980-R-S-0450-3
VT-980-R-S-0450-6
10
VT-980-R-S-0450-10
VT-981-B-S-0750-3
VG-SSR
return
VG-011-SH
carry
879-K4-1/2
880-K4-1/2
881-K4-1/2
return
VG-205
series bracket
support bar
carry
881-K7-1/2
VT-981-B-S-0750-6
10
VT-981-B-S-0750-10
VT-981-R-S-0750-3
1
6
VT-981-R-S-0750-6
10
VT-981-R-S-0750-10
VT-982-B-S-0450-3
VT-982-B-S-0450-6
10
VT-982-B-S-0450-10
VT-982-R-S-0450-3
VT-982-R-S-0450-6
10
VT-982-R-S-0450-10
VT-982-B-S-0750-3
VT-982-B-S-0750-6
10
VT-982-B-S-0750-10
VT-982-R-S-0750-3
return
Recommended
Mounting
882-K4-1/2
1.188
return
carry
or
882-K7-1/2
1.188
6
VT-982-R-S-0750-6
10
VT-982-R-S-0750-10
return
Note: Because the bottom dimensions of the 879, 880 and 881 chains are the same
for widths up to 4", the VT-980 track is used for all three chains.
879-
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
880980-B or -R series
74
881-K3, 4
881-K7
882-
981-B or -R series
982-B or -R series
Revolution in conveyor
chain track
TM
No Entrapment
or Debris
Buildup Areas!
VT2
ValuTrac 2
Combines the durability and low friction of our engineered plastic wear materials with sturdy stainless
steel mounting plates. This makes mounting and
replacement easy and quick.
/2"
4-1
Curve - 18"
hain
rad
"C
ius
4
/
1
3
25
45
32
65
Curve - 24"
Chain
radi
us
85
58
84
Chain Number
ValuTrac II Module
Chain number
ValuTrac II Module
1873-
1873G
1874-
1874G
973-T- series
880TAB-
879TAB-
882TAB-
881TAB-K3, 4
LBP882T-
882G
982-T- series
980-T- series
75
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
ValuTrac II
ValuTrac II
Chain Guides
and Wear Strips
TM
NOLU-S
NOLU-SR
NYLATRON
Nolu-BR UHMW is
our standard track
material. It is a proprietary blend of resins
and reground UHMW
that maximizes wear
and friction properties
for most applications.
Nolu-S is a patented
alloy of UHMW and
other dry lubricants
that maintains good
wear characteristics
while significantly
reducing the track's
coefficient of friction.
Nylatron is an
extremely hard
plastic which has
characteristics allowing it to be used in
high-speed/high-load
applications or those
involving abrasives.
Radius
Nolu-BR
Part Number
Nolu-S
Part Number
Nolu-SR
Part Number
Nylatron
Part Number
18
VT2-980-T-18-0325
VT2-S-980-T-18-0325
VT2-SR-980-T-18-0325
VT2-N-980-T-18-0325
24
VT2-980-T-24-0325
VT2-S-980-T-24-0325
VT2-SR-980-T-24-0325
VT2-N-980-T-24-0325
90
Ra
diu
Track
Width
Track
Height
Carry or
Return
879TAB-K3-1/4
880TAB-K3-1/4
881TAB-K3-1/4
3.75
879TAB-K4-1/2
880TAB-K4-1/2
881TAB-K4-1/2
24
VT2-980-T-24-0450
VT2-S-980-T-24-0450
VT2-SR-980-T-24-0450
VT2-N-980-T-24-0450
882TAB-K4-1/2
1.188
24
VT2-982-T-24-0450
VT2-S-982-T-24-0450
VT2-SR-982-T-24-0450
VT2-N-982-T-24-0450
881TAB-K7-1/2
24
VT2-981-T-24-0750
VT2-S-981-T-24-0750
VT2-SR-981-T-24-0750
VT2-N-981-T-24-0750
882TAB-K7-1/2
1.188
24
VT2-982-T-24-0750
VT2-S-982-T-24-0750
VT2-SR-982-T-24-0750
VT2-N-982-T-24-0750
1873-K3-1/4
1874-K3-1/4
18
VT2-973-T-18-0325
VT2-S-973-T-18-0325
VT2-SR-973-T-18-0325
VT2-N-973-T-18-0325
3.75
1.375
24
VT2-973-T-24-0325
VT2-S-973-T-24-0325
VT2-SR-973-T-24-0325
VT2-N-973-T-24-0325
Le
ng
th
NOLU-BR
NOLU-S
Length in
Feet
Nolu-BR
Part Number
Nolu-S
Part Number
VT2-980-T-S-0325-3
VT2-S-980-T-S-0325-3
Chain Number
879TAB-K3-1/4
880TAB-K3-1/4
881TAB-K3-1/4
879TAB-K4-1/2
880TAB-K4-1/2
881TAB-K4-1/2
882TAB-K4-1/2
881TAB-K7-1/2
882TAB-K7-1/2
1873-K3-1/4
1874-K3-1/4
Track
Width
3.75
3.75
Track
Height
Carry or Return
1.188
1.188
1.375
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
VT2-980-T-S-0325-6
VT2-S-980-T-S-0325-6
10
VT2-980-T-S-0325-10
VT2-S-980-T-S-0325-10
VT2-980-T-S-0450-3
VT2-S-980-T-S-0450-3
VT2-980-T-S-0450-6
VT2-S-980-T-S-0450-6
10
VT2-980-T-S-0450-10
VT2-S-980-T-S-0450-10
VT2-982-T-S-0450-3
VT2-S-982-T-S-0450-3
VT2-982-T-S-0450-6
VT2-S-982-T-S-0450-6
10
VT2-982-T-S-0450-10
VT2-S-982-T-S-0450-10
VT2-981-T-S-0750-3
VT2-S-981-T-S-0750-3
VT2-981-T-S-0750-6
VT2-S-981-T-S-0750-6
10
VT2-981-T-S-0750-10
VT2-S-981-T-S-0750-10
VT2-982-T-S-0750-3
VT2-S-982-T-S-0750-3
VT2-982-T-S-0750-6
VT2-S-982-T-S-0750-6
10
VT2-982-T-S-0750-10
VT2-S-982-T-S-0750-10
VT2-973-T-S-0325-3
VT2-S-973-T-S-0325-3
VT2-973-T-S-0325-6
VT2-S-973-T-S-0325-6
VT2-973-T-S-0325-10
VT2-S-973-T-S-0325-10
10
76
ValuTrac III
TM
in Curve - 18" r
adi
Cha
"
4
us
-1/
25
NOLU-BR
NOLU-S
NOLU-SR
NYLATRON
Nolu-BR UHMW is
our standard track
material. It is a proprietary blend of resins
and reground UHMW
that maximizes wear
and friction properties
for most applications.
Nolu-S is a patented
alloy of UHMW and
other dry lubricants
that maintains good
wear characteristics
while significantly
reducing the track's
coefficient of friction.
Nylatron is an
extremely hard
plastic which has
characteristics allowing it to be used in
high-speed/high-load
applications or those
involving abrasives.
Nylatron (inside)
and Nolu-BR
Other
material
Chain Guides
and Wear Strips
45
65
85
r
v
u
e
- 24"
ain C
radi
" Ch
us
-1/2
32
58
84
Nylatron (inside)
and Nolu-S
Nylatron (inside)
and Nolu-SR
Nylatron
Most wear occurs on the inside portion of
tracks. In some situations where Nylatron
is necessary, ValuTrac III is an economical alternative to solid Nylatron curves.
Chain Number
Track
Width
Track
Height
879TAB-K3-1/4
880TAB-K3-1/4
881TAB-K3-1/4
3.75
879TAB-K4-1/2
880TAB-K4-1/2
881TAB-K4-1/2
882TAB-K4-1/2
Carry or
Return
90
90
90
Ra
Ra
Ra
diu
diu
diu
Radius
Part Number
Part Number
Part Number
18
VT3-N-B-980-T-18-0325
VT3-N-S-980-T-18-0325
VT3-N-SR-980-T-18-0325
24
VT3-N-B-980-T-24-0325
VT3-N-S-980-T-24-0325
VT3-N-SR-980-T-24-0325
24
VT3-N-B-980-T-24-0450
VT3-N-S-980-T-24-0450
VT3-N-SR-980-T-24-0450
1.188
24
VT3-N-B-982-T-24-0450
VT3-N-S-982-T-24-0450
VT3-N-SR-982-T-24-0450
881TAB-K7-1/2
24
VT3-N-B-981-T-24-0750
VT3-N-S-981-T-24-0750
VT3-N-SR-981-T-24-0750
882TAB-K7-1/2
24
VT3-N-B-982-T-24-0750
VT3-N-S-982-T-24-0750
VT3-N-SR-982-T-24-0750
1873-K3-1/4
1874-K3-1/4
18
VT3-N-B-973-T-18-0325
VT3-N-S-973-T-18-0325
VT3-N-SR-973-T-18-0325
3.75
1.375
24
VT3-N-B-973-T-24-0325
VT3-N-S-973-T-24-0325
VT3-N-SR-973-T-24-0325
Chain Number
ValuTrac III Module
Chain number
ValuTrac III Module
1873-
1873G
1874-
1874G
973-T- series
880TAB-
879TAB-
881TAB-K3, 4
882TAB-
LBP882T-
882G
982-T- series
980-T- series
NOTE: Specialty chain styles such as gripper and low back pressure use the same ValuTrac II module as
the standard sideflexing counterpart. Example: Chain no. 1873G (gripper style) uses the same module as
standard chain no. 1873-.
77
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
ValuTrac
Chain Guides
and Wear Strips
Width
Width
Chain gap
Chain gap
Height
Height
Height
Height
5/8"
Enter the information in the boxes below and fax to Solus Customer Service at 866-447-6587.
Custom Straights
Custom Turns
Person requesting custom information
Length
(Overall length of module
6 feet typical)
Angle
(in degrees)
Fax
NOT
APPLICABLE
NOT
APPLICABLE
NOT
APPLICABLE
Height
(Overall height of
module in inches)
Tangent
Width*
Angle
Height
Center
Point
Edge Width
Width*
Edge
Width
Chain Gap
(Space between edges of chain)
Radius:
#1
Radius:
#2
Radius:
Chain Style #3:
#3
Radius:
#4
Material:
(Please check one)
Proprietary A4
Black UHMW:
Nylatron:
Nolu-S
Lubricated UHMW:
Nolu-SR Reinforced
Lubricated UHMW:
Other:
*NOTE: Please include the desired gap between each chain when calculating
the overall module width. Recommended minimum gap is 1/16".
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
78
Virgin White
UHMW:
Narrow ValuTrac
NARROW
dth
n Wi
Chai
Chain Guides
and Wear Strips
Introducing
TM
dard
Stan
dth
n Wi
Chai
Narro
VT-SR-973-
VTK-SR-973-
VT-N-973-
VTK-N-973-
VT-980-
VTK-980-
Narrow ValuTrac
(chain width plus 1/4")
VT-S-980-
VTK-S-980-
VT-SR-980-
VTK-SR-980-
VT-N-980-
VTK-N-980-
VT-981-
VTK-981-
VT-982-
VTK-982-
VT-S-982-
VTK-S-982-
VT-SR-982-
VTK-SR-982-
VT-N-982-
VTK-N-982-
VT2-980-
VT2K-980VT2K-S-980VT2K-SR-980-
VT2-N-980-
VT2K-N-980-
VT2-982-
VT2K-982-
VT2-S-982-
VT2K-S-982-
VT2-SR-982-
VT2K-SR-982-
VT2-N-982-
VT2K-N-982-
VT3-N-B-980-
VT3K-N-B-980-
VT3-N-S-980-
VT3K-N-S-980-
VT3-N-SR-980-
VT3K-N-SR-980-
VT3-N-B-982-
VT3K-N-B-982-
VT3-N-S-982-
VT3K-N-S-982-
VT3-N-SR-982-
VT3K-N-SR-982-
Butt
Splice
Chain
plus 1/4!
Chain
plus 1/4!
In overlap splice construction one track must be
standard width and one must be narrow width.
Chain
plus 1/4!
NA
R
TM
TM
VT2-S-980VT2-SR-980-
Standard ValuTrac
(chain width plus 1/2")
79
TM
VTK-973VTK-S-973-
TM
VT-973VT-S-973-
Narrow ValuTrac
series part
number prefix.
ain
1/4 wid
inc th p
h lu
Standard ValuTrac
series part
number prefix.
RO
W
Ch
Narrow ValuTrac
NARROW
Chain Guides
and Wear Strips
NOLU-BR
NOLU-S
NOLU-SR
NYLATRON
Nolu-BR UHMW is
our standard track
material. It is a
proprietary blend of
resins and reground
UHMW that
maximizes wear and
friction properties for
most applications.
Nolu-S is a patented
alloy of UHMW and
other dry lubricants
that maintains good
wear characteristics
while significantly
reducing the track's
coefficient of friction.
Nylatron is an
extremely hard plastic
which has characteristics allowing it to be
used in high-speed/
high-load applications
or those involving
abrasives.
Radius
Nolu-BR
Part Number
Nolu-S
Part Number
Nolu-SR
Part Number
Nylatron
Part Number
18
VTK-980-T-18-0325
VTK-S-980-T-18-0325
VTK-SR-980-T-18-0325
VTK-N-980-T-18-0325
24
VTK-980-T-24-0325
VTK-S-980-T-24-0325
VTK-SR-980-T-24-0325
VTK-N-980-T-24-0325
VTK-S-980-T-24-0450
VTK-SR-980-T-24-0450
VTK-N-980-T-24-0450
Ra
diu
*
*
TM
Chain Number
Track
Width
Track
Height
Carry or
Return
879TAB-K3-1/4
880TAB-K3-1/4
881TAB-K3-1/4
3.5
879TAB-K4-1/2
880TAB-K4-1/2
881TAB-K4-1/2
4.75
24
VTK-980-T-24-0450
881TAB-K7-1/2
7.75
24
VTK-981-T-24-0750
882TAB-K4-1/2
4.75
1.188
24
VTK-982-T-24-0450
VTK-S-982-T-24-0450
VTK-SR-982-T-24-0450
VTK-N-982-T-24-0450
882TAB-K7-1/2
7.75
1.188
24
VTK-982-T-24-0750
VTK-S-982-T-24-0750
VTK-SR-982-T-24-0750
VTK-N-982-T-24-0750
1873-K3-1/4
1874-K3-1/4
18
VTK-973-T-18-0325
VTK-S-973-T-18-0325
VTK-SR-973-T-18-0325
VTK-N-973-T-18-0325
3.5
1.375
24
VTK-973-T-24-0325
VTK-S-973-T-24-0325
VTK-SR-973-T-24-0325
VTK-N-973-T-24-0325
1873-K4-1/2
1874-K4-1/2
18
VTK-973-T-18-0450
4.75
24
VTK-973-T-24-0450
VTK-S-973-T-24-0450
VTK-SR-973-T-24-0450
1873-K7-1/2
1874-K7-1/2
18
VTK-973-T-18-0750
7.75
24
VTK-973-T-24-0750
VTK-S-973-T-24-0750
VTK-SR-973-T-24-0750
1.375
1.375
1873-
Chain number
879TAB-
Narrow ValuTrac
1873G
1874-
1874G
973-T- series
880TAB980-T- series
881TAB-K3, 4
881TAB-K7
981-T- series
882TAB-
LBP882T-
982-T- series
TM
lus
hp
dt
wi nch
ain 1/4 i
Ch
OW
RR
NA
NOTE: Specialty chain styles such as gripper and low back pressure use the same Narrow ValuTrac module
as the standard sideflexing counterpart. Example: Chain no. 1873G (gripper style) uses the same module as
standard chain no. 1873-. For 815, 820, or 831 style chain, use Narrow ValuTrac part number VTK-980-T-.
* These Narrow ValuTrac modules are commonly used on side gripping, elevator/lowerator systems.
80
882G
Narrow ValuTrac
NARROW
ng
th
TM
Chain Guides
and Wear Strips
Le
882TAB-K4-1/2
882TAB-K7-1/2
1873-K3-1/4,
1874-K3-1/4
1873-K4-1/2,
1874-K4-1/2
1873-K7-1/2,
1874-K7-1/2
7.75
4.75
7.75
3.5
4.75
7.75
1.188
1.188
1.375
1.375
1.375
Length in Feet
VTK-980-T-S-0325-3
VTK-S-980-T-S-0325-3
VTK-980-T-S-0325-6
VTK-S-980-T-S-0325-6
10
VTK-980-T-S-0325-10
VTK-S-980-T-S-0325-10
VTK-980-T-S-0450-3
VTK-S-980-T-S-0450-3
VTK-980-T-S-0450-6
VTK-S-980-T-S-0450-6
10
VTK-980-T-S-0450-10
VTK-S-980-T-S-0450-10
VTK-981-T-S-0750-3
VTK-S-981-T-S-0750-3
VTK-981-T-S-0750-6
VTK-S-981-T-S-0750-6
10
VTK-981-T-S-0750-10
VTK-S-981-T-S-0750-10
VTK-982-T-S-0450-3
VTK-S-982-T-S-0450-3
VTK-982-T-S-0450-6
VTK-S-982-T-S-0450-6
10
VTK-982-T-S-0450-10
VTK-S-982-T-S-0450-10
VTK-982-T-S-0750-3
VTK-S-982-T-S-0750-3
VTK-982-T-S-0750-6
VTK-S-982-T-S-0750-6
10
VTK-982-T-S-0750-10
VTK-S-982-T-S-0750-10
VTK-973-T-S-0325-3
VTK-S-973-T-S-0325-3
VTK-973-T-S-0325-6
VTK-S-973-T-S-0325-6
10
VTK-973-T-S-0325-10
VTK-S-973-T-S-0325-10
VTK-973-T-S-0450-3
VTK-973-T-S-0450-6
10
VTK-973-T-S-0450-10
VTK-973-T-S-0750-3
VTK-973-T-S-0750-6
10
VTK-973-T-S-0750-10
*These Narrow ValuTrac modules are commonly used on side gripping, elevator/lowerator systems.
81
881TAB-K7-1/2
4.75
Carry or Return
ain
1/4 wid
inc th p
h lu
879TAB-K4-1/2
880TAB-K4-1/2
881TAB-K4-1/2
3.5
Track Height
RO
W
879TAB-K3-1/4
880TAB-K3-1/4
881TAB-K3-1/4
Track Width
Ch
Chain Number
NOLU-S
Nolu-S is a patented alloy of
UHMW and other dry lubricants
that maintains good wear characteristics while significantly
reducing the track's coefficient
of friction.
NA
R
NOLU-BR
Nolu-BR UHMW is our standard
track material. It is a proprietary
blend of resins and reground
UHMW that maximizes wear
and friction properties for most
applications.
TM
Narrow ValuTrac
Chain Guides
and Wear Strips
NARROW
Straight Sections
for Bevel Chain
TM
Le
ng
th
NOLU-BR
Nolu-BR UHMW is our standard
track material. It is a proprietary
blend of resins and reground
UHMW that maximizes wear
and friction properties for most
applications.
90
Ra
diu
Chain
Number
Track
Width
Track
Height
Carry or
Return
Radius
Nolu-BR
Part Number
18
VTK-980-B-18-0325
24
VTK-980-B-24-0325
carry
879-K3-1/4
880-K3-1/4
881-K3-1/4
3.5
Chain
Number
return
VTK-980-R-18-0325
24
VTK-980-R-24-0325
Track
Height
Carry or
Return
Length
(Feet)
Nolu-BR
Part Number
VTK-980-B-S-0325-3
carry
1
18
Track
Width
879-K3-1/4
880-K3-1/4
881-K3-1/4
3.5
VTK-980-B-S-0325-6
10
VTK-980-B-S-0325-10
VTK-980-R-S-0325-3
VTK-980-R-S-0325-6
10
VTK-980-R-S-0325-10
VTK-980-B-S-0450-3
VTK-980-B-S-0450-6
10
VTK-980-B-S-0450-10
VTK-980-R-S-0450-3
VTK-980-R-S-0450-6
10
VTK-980-R-S-0450-10
VTK-981-B-S-0750-3
return
VTK-980-B-24-0450
carry
879-K4-1/2
880-K4-1/2
881-K4-1/2
4.75
24
VTK-980-R-24-0450
carry
return
VTK-981-B-24-0750
carry
881-K7-1/2
7.75
879-K4-1/2
880-K4-1/2
881-K4-1/2
4.75
return
24
VTK-981-R-24-0750
return
carry
VTK-982-B-24-0450
carry
882-K4-1/2
4.75
881-K7-1/2
24
1.188
7.75
VTK-982-R-24-0450
VTK-982-B-24-0750
24
1.188
carry
VTK-982-R-24-0750
882-K4-1/2
return
4.75
VTK-981-R-S-0750-3
VTK-981-R-S-0750-6
10
VTK-981-R-S-0750-10
VTK-982-B-S-0450-3
VTK-982-B-S-0450-6
10
VTK-982-B-S-0450-10
VTK-982-R-S-0450-3
VTK-982-R-S-0450-6
10
VTK-982-R-S-0450-10
VTK-982-B-S-0750-3
VTK-982-B-S-0750-6
10
VTK-982-B-S-0750-10
VTK-982-R-S-0750-3
1.188
Narrow ValuTrac for bevel chains use a 1 piece track for carry-ways.
Return-ways consist of 2 pieces, the track and a 5/8" thick chain support
plate.
7
3
return
carry
7.75
VTK-981-B-S-0750-6
VTK-981-B-S-0750-10
return
882-K7-1/2
6
10
return
* Support plate spacing: 879=( /32") 880=( /16") 881=( /32") 882=( /32")
carry
Note: Because the bottom dimensions of the 879, 880 and 881 chains are the
same for widths up to 4", the VTK-980 track is used for all three chains.
882-K7-1/2
7.75
1.188
6
VTK-982-R-S-0750-6
10
VTK-982-R-S-0750-10
return
OW
RR
NA
TM
lus
hp
dt
wi nch
ain 1/4 i
Ch
Chain Number
Narrow ValuTrac
879-
880980-B or -R series
82
881-K3, 4
881-K7
882-
981-B or -R series
982-B or -R series
Narrow ValuTrac II
TM
Revolution in
conveyor chain track
Chain Guides
and Wear Strips
NARROW
No Entrapment
or Debris
Buildup Areas!
VTK2
Narrow ValuTrac 2
Combines the durability and low friction of our engineered plastic wear materials with sturdy stainless
steel mounting plates. This makes mounting and
replacement easy and quick.
/2"
4-1
Curve - 18"
hain
rad
"C
ius
4
/
3-1
25
45
Curve - 24"
Chain
radi
us
32
65
85
58
84
1873G
1874-
1874G
973-T- series
881TAB-K3, 4
882TAB-
LBP882T-
882G
83
NA
R
NOTE: Specialty chain styles such as gripper and low back pressure use the same ValuTrac II module as
the standard sideflexing counterpart. Example: Chain no. 1873G (gripper style) uses the same module as
standard chain no. 1873-.
TM
982-T- series
980-T- series
ain
1/4 wid
inc th p
h lu
880TAB-
879TAB-
RO
W
Chain number
ValuTrac II Module
1873-
Ch
Chain Number
ValuTrac II Module
Narrow ValuTrac II
NARROW
TM
Chain Guides
and Wear Strips
NOLU-BR
NOLU-S
NOLU-SR
NYLATRON
Nolu-BR UHMW is
our standard track
material. It is a proprietary blend of resins
and reground UHMW
that maximizes wear
and friction properties
for most applications.
Nolu-S is a patented
alloy of UHMW and
other dry lubricants
that maintains good
wear characteristics
while significantly
reducing the track's
coefficient of friction.
Nylatron is an
extremely hard plastic
which has characteristics allowing it to be
used in high-speed/
high-load applications
or those involving
abrasives.
Radius
Nolu-BR
Part Number
Nolu-S
Part Number
Nolu-SR
Part Number
Nylatron
Part Number
18
VT2K-980-T-18-0325
VT2K-S-980-T-18-0325
VT2K-SR-980-T-18-0325
VT2K-N-980-T-18-0325
24
VT2K-980-T-24-0325
VT2K-S-980-T-24-0325
VT2K-SR-980-T-24-0325
VT2K-N-980-T-24-0325
Ra
diu
Chain Number
Track
Width
Track
Height
Carry or
Return
879TAB-K3-1/4
880TAB-K3-1/4
881TAB-K3-1/4
3.5
879TAB-K4-1/2
880TAB-K4-1/2
881TAB-K4-1/2
4.75
24
VT2K-980-T-24-0450
VT2K-S-980-T-24-0450
VT2K-SR-980-T-24-0450
VT2K-N-980-T-24-0450
882TAB-K4-1/2
4.75
1.188
24
VT2K-982-T-24-0450
VT2K-S-982-T-24-0450
VT2K-SR-982-T-24-0450
VT2K-N-982-T-24-0450
1873-K3-1/4
1874-K3-1/4
18
VT2K-973-T-18-0325
VT2K-S-973-T-18-0325
VT2K-SR-973-T-18-0325
VT2K-N-973-T-18-0325
3.5
1.375
24
VT2K-973-T-24-0325
VT2K-S-973-T-24-0325
VT2K-SR-973-T-24-0325
VT2K-N-973-T-24-0325
Le
ng
th
NOLU-BR
NOLU-S
Length in
Feet
Nolu-BR
Part Number
Nolu-S
Part Number
VT2K-980-T-S-0325-3
VT2K-S-980-T-S-0325-3
Chain Number
879TAB-K3-1/4
880TAB-K3-1/4
881TAB-K3-1/4
879TAB-K4-1/2
880TAB-K4-1/2
881TAB-K4-1/2
882TAB-K4-1/2
1873-K3-1/4
1874-K3-1/4
Track
Width
3.5
4.75
4.75
3.5
Track
Height
Carry or Return
1.188
1.375
OW
RR
NA
TM
lus
hp
dt
wi nch
ain 1/4 i
Ch
84
VT2K-980-T-S-0325-6
VT2K-S-980-T-S-0325-6
10
VT2K-980-T-S-0325-10
VT2K-S-980-T-S-0325-10
VT2K-980-T-S-0450-3
VT2K-S-980-T-S-0450-3
VT2K-980-T-S-0450-6
VT2K-S-980-T-S-0450-6
10
VT2K-980-T-S-0450-10
VT2K-S-980-T-S-0450-10
VT2K-982-T-S-0450-3
VT2K-S-982-T-S-0450-3
VT2K-982-T-S-0450-6
VT2K-S-982-T-S-0450-6
10
VT2K-982-T-S-0450-10
VT2K-S-982-T-S-0450-10
VT2K-973-T-S-0325-3
VT2K-S-973-T-S-0325-3
VT2K-973-T-S-0325-6
VT2K-S-973-T-S-0325-6
10
VT2K-973-T-S-0325-10
VT2K-S-973-T-S-0325-10
TM
NOLU-BR
Nolu-BR UHMW is
our standard track
material. It is a proprietary blend of resins
and reground UHMW
that maximizes wear
and friction properties
for most applications.
NOLU-S
NOLU-SR
Nolu-S is a patented
alloy of UHMW and
other dry lubricants
that maintains good
wear characteristics
while significantly
reducing the track's
coefficient of friction.
Track
Width
Track
Height
879TAB-K3-1/4
880TAB-K3-1/4
881TAB-K3-1/4
3.5
879TAB-K4-1/2
880TAB-K4-1/2
881TAB-K4-1/2
4.75
882TAB-K4-1/2
1873-K3-1/4
1874-K3-1/4
65
85
r
v
u
e
- 24"
ain C
radi
" Ch
us
-1/2
32
58
Nylatron (inside)
and Nolu-S
90
84
Nylatron (inside)
and Nolu-SR
90
90
Ra
Ra
Ra
diu
Carry or
Return
45
Nylatron is an
extremely hard
plastic which has
characteristics allowing it to be used in
high-speed/high-load
applications or those
involving abrasives.
diu
diu
Chain Number
25
Nylatron (inside)
and Nolu-BR
ValuTrac III for tab chains
can be used as carry-ways,
or flipped upside down and
used as return-ways.
in Curve - 18" r
adi
Cha
"
4
us
-1/
NYLATRON
Chain Guides
and Wear Strips
NARROW
Radius
Part Number
Part Number
Part Number
18
VT3K-N-B-980-T-18-0325
VT3K-N-S-980-T-18-0325
VT3K-N-SR-980-T-18-0325
24
VT3K-N-B-980-T-24-0325
VT3K-N-S-980-T-24-0325
VT3K-N-SR-980-T-24-0325
24
VT3K-N-B-980-T-24-0450
VT3K-N-S-980-T-24-0450
VT3K-N-SR-980-T-24-0450
4.75
1.188
24
VT3K-N-B-982-T-24-0450
VT3K-N-S-982-T-24-0450
VT3K-N-SR-982-T-24-0450
18
VT3K-N-B-973-T-18-0325
VT3K-N-S-973-T-18-0325
VT3K-N-SR-973-T-18-0325
3.5
1.375
24
VT3K-N-B-973-T-24-0325
VT3K-N-S-973-T-24-0325
VT3K-N-SR-973-T-24-0325
1873G
1874-
1874G
973-T- series
882TAB-
881TAB-K3, 4
LBP882T-
882G
85
s
ain
1/4 wid
inc th p
h lu
NOTE: Specialty chain styles such as gripper and low back pressure use the same ValuTrac II module as
the standard sideflexing counterpart. Example: Chain no. 1873G (gripper style) uses the same module as
standard chain no. 1873-.
TM
982-T- series
980-T- series
RO
W
880TAB-
879TAB-
Ch
Chain number
ValuTrac III Module
1873-
NA
R
Chain Number
ValuTrac III Module
pe th
e
sha
ial ket te tural
c
e
Sp proc r na ter
f
o
s
ga
he
es f
of t ensat henin se!
p
u
gt
com in len nged
cha prolo
HPitchDiam.
H
PitchDiam.
S
(+.0to.04)
Idler Sprocket
C
OutsideDiam.
Drive Sprocket
COutsideDiam.
1.50
1.50
S
(+.0to.04)
Chain Guides
and Wear Strips
For
P
CCs!
A
H ed
Ne
1.63
1.63
Shaftsized
boredia.
Shaftsized
boredia.
StandardKe
yseats
1/4
1/8
1-1-1/4dia.sh
3/8
3/16
Shaft Sized
Bore Dia.
Number
of Teeth
Outside
Diameter
C
815-19MP-IDL-1
815-19MP-IDL-1.25
815-19MP-IDL-1.44
815-19MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
19
19
19
19
19
4.61
4.61
4.61
4.61
4.61
4.62
4.62
4.62
4.62
4.62
2.44
2.44
2.44
2.44
2.44
815-21MP-.71
815-21MP-1
815-21MP-1.25
815-21MP-1.44
815-21MP-1.5
815-21MP-IDL-1
815-21MP-IDL-1.25
815-21MP-IDL-1.44
815-21MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
21
21
21
21
21
5.08
5.08
5.08
5.08
5.08
5.09
5.09
5.09
5.09
5.09
2.67
2.67
2.67
2.67
2.67
815-23MP-.71
815-23MP-1
815-23MP-1.25
815-23MP-1.44
815-23MP-1.5
815-23MP-IDL-1
815-23MP-IDL-1.25
815-23MP-IDL-1.44
815-23MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
23
23
23
23
23
5.59
5.59
5.59
5.59
5.59
5.56
5.56
5.56
5.56
5.56
2.91
2.91
2.91
2.91
2.91
815-25MP-.71
815-25MP-1
815-25MP-1.25
815-25MP-1.44
815-25MP-1.5
815-25MP-IDL-1
815-25MP-IDL-1.25
815-25MP-IDL-1.44
815-25MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
25
25
25
25
25
6.06
6.06
6.06
6.06
6.06
6.03
6.03
6.03
6.03
6.03
3.14
3.14
3.14
3.14
3.14
815-27MP-.71
815-27MP-1
815-27MP-1.25
815-27MP-1.44
815-27MP-1.5
815-27MP-IDL-1
815-27MP-IDL-1.25
815-27MP-IDL-1.44
815-27MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
27
27
27
27
27
6.57
6.57
6.57
6.57
6.57
6.50
6.50
6.50
6.50
6.50
3.38
3.38
3.38
3.38
3.38
Sprocket
Part Number
Idler
Part Number
815-19MP-.71
815-19MP-1
815-19MP-1.25
815-19MP-1.44
815-19MP-1.5
Pitch
Shaft Center
Diameter to Wear Surface S
H
(+0 to .04)
1-7/16-1-3/4dia.
Save installation
time with split
sprockets and idler
wheels.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
86
Molded Sprockets
Chain Guides
and Wear Strips
1.77(Hub)
1.50
1.77(Hub)
1.50
2.09
2.09
Shaftsized
boredia.
StandardKe
yseats
C
OutsideDiam.
Idler Sprocket
C
OutsideDiam.
Drive Sprocket
(+.0to.04)
InsideDiam.
(+.0to.04)
B
InsideDiam.
Shaftsized
boredia.
Material: Polyamide body with stainless steel connecting screws and nuts in nickel plated brass.
1/4
1/8
1-1-1/4dia.sh
3/8
3/16
1-7/16-1-3/4dia.
Shaft Sized
Bore Dia.
Number
of Teeth
Inside
Diameter
B
815-21P-IDL-1
815-21P-IDL-1.25
815-21P-IDL-1.44
815-21P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
21
21
21
21
4.57
4.57
4.57
4.57
5.08
5.08
5.08
5.08
2.67
2.67
2.67
2.67
815-23P-1
815-23P-1.25
815-23P-1.44
815-23P-1.5
815-23P-IDL-1
815-23P-IDL-1.25
815-23P-IDL-1.44
815-23P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
23
23
23
23
5.04
5.04
5.04
5.04
5.59
5.59
5.59
5.59
2.91
2.91
2.91
2.91
815-25P-1
815-25P-1.25
815-25P-1.44
815-25P-1.5
815-25P-IDL-1
815-25P-IDL-1.25
815-25P-IDL-1.44
815-25P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
25
25
25
25
5.51
5.51
5.51
5.51
6.06
6.06
6.06
6.06
3.14
3.14
3.14
3.14
Sprocket
Part Number
Idler
Part Number
815-21P-1
815-21P-1.25
815-21P-1.44
815-21P-1.5
Outside
Shaft Center
Diameter to Wear Surface S
C
(+0 to .04)
Save installation
time with split
sprockets and idler
wheels.
87
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Idler Wheels
ion
Corros t!
an
Resist
2.19(Hub)
1.50
P
CCs!
A
H ed
B
InsideDiam.
For
C
OutsideDiam.
1.73
(+.0to.04)
Chain Guides
and Wear Strips
Idler Wheels
2.32
Shaftsized
boredia.
Ne
Shaft Sized
Bore Dia.
Equivalent
Number
of Teeth
Inside
Diameter
B
Outside
Diameter
C
Shaft Center
to Wear Surface S
(+0 to .04)
815-21LF-IDL-1
815-21LF-IDL-1.25
815-21LF-IDL-1.44
815-21LF-IDL-1.5
1
1-1/4
1-7/16
1-1/2
21
21
21
21
4.07
4.07
4.07
4.07
5.10
5.10
5.10
5.10
2.70
2.70
2.70
2.70
815-23LF-IDL-1
815-23LF-IDL-1.25
815-23LF-IDL-1.44
815-23LF-IDL-1.5
1
1-1/4
1-7/16
1-1/2
23
23
23
23
4.07
4.07
4.07
4.07
5.63
5.63
5.63
5.63
2.94
2.94
2.94
2.94
815-25LF-IDL-1
815-25LF-IDL-1.25
815-25LF-IDL-1.44
815-25LF-IDL-1.5
1
1-1/4
1-7/16
1-1/2
25
25
25
25
4.80
4.80
4.80
4.80
6.08
6.08
6.08
6.08
3.17
3.17
3.17
3.17
Idler
Part Number
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
88
Idler Wheels
1.50
C
OutsideDiam.
(+.0to.04)
1.73
B
InsideDiam.
Chain Guides
and Wear Strips
rced
Reinfo !
n
Versio
2.24
2.40
Shaftsized
boredia.
Shaft Sized
Bore Dia.
Equivalent
Number
of Teeth
815-21-IDL-1
815-21-IDL-1.25
815-21-IDL-1.44
815-21-IDL-1.5
1
1-1/4
1-7/16
1-1/2
21
21
21
21
815-25-IDL-1
815-25-IDL-1.25
815-25-IDL-1.44
815-25-IDL-1.5
1
1-1/4
1-7/16
1-1/2
25
25
25
25
Idler
Part Number
Save installation
time with split
idler wheels.
89
Inside
Diameter
B
Outside
Diameter
C
Shaft Center
to Wear Surface S
(+0 to .04)
1.38
1.57
1.77
1.97
3.82
3.82
3.82
3.82
5.11
5.11
5.11
5.11
2.70
2.70
2.70
2.70
1.38
1.57
1.77
1.97
4.02
4.02
4.02
4.02
6.09
6.09
6.09
6.09
3.17
3.17
3.17
3.17
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
P
CCs!
A
H ed
Ne
1.63
Shaftsized
boredia.
C
OutsideDiam.
C
OutsideDiam.
For
Idler Sprocket
H
PitchDiam.
Drive Sprocket
1.22
1.50
H
PitchDiam.
These sprockets have been machined from solid polyamide material, giving them a completely closed structure which is easier to
clean and disinfect. The reinforced design of the sprocket ensures
smooth running with reduced noise levels. Additional benefits
include increased keyway strength, excellent chemical resistance,
and long service life.
1.22
1.50
(+.0to.04)
(+.0to.04)
Chain Guides
and Wear Strips
pe th
e
sha
ial ket te tural
c
e
Sp proc r na ter
f
o
s
ga
he
es f
of t ensat henin se!
p
u
gt
com in len nged
cha prolo
1.63
Shaftsized
boredia.
StandardKe
yseats
1/4
1/8
1-1-1/4dia.sh
3/8
3/16
1-7/16-1-3/4dia.
Save installation
time with split
sprockets and idler
wheels.
Shaft Sized
Bore Dia.
Number
of Teeth
Outside
Diameter
C
Pitch
Diameter
H
Shaft Center
to Wear Surface S
(+0 to .04)
881-19MP-IDL-1
881-19MP-IDL-1.25
881-19MP-IDL-1.44
881-19MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
19
19
19
19
19
4.61
4.61
4.61
4.61
4.61
4.62
4.62
4.62
4.62
4.62
2.76
2.76
2.76
2.76
2.76
2.44
2.44
2.44
2.44
2.44
881-21MP-.71
881-21MP-1
881-21MP-1.25
881-21MP-1.44
881-21MP-1.5
881-21MP-IDL-1
881-21MP-IDL-1.25
881-21MP-IDL-1.44
881-21MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
21
21
21
21
21
5.08
5.08
5.08
5.08
5.08
5.09
5.09
5.09
5.09
5.09
2.95
2.95
2.95
2.95
2.95
2.67
2.67
2.67
2.67
2.67
881-23MP-.71
881-23MP-1
881-23MP-1.25
881-23MP-1.44
881-23MP-1.5
881-23MP-IDL-1
881-23MP-IDL-1.25
881-23MP-IDL-1.44
881-23MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
23
23
23
23
23
5.59
5.59
5.59
5.59
5.59
5.56
5.56
5.56
5.56
5.56
3.15
3.15
3.15
3.15
3.15
2.91
2.91
2.91
2.91
2.91
881-25MP-.71
881-25MP-1
881-25MP-1.25
881-25MP-1.44
881-25MP-1.5
881-25MP-IDL-1
881-25MP-IDL-1.25
881-25MP-IDL-1.44
881-25MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
25
25
25
25
25
6.06
6.06
6.06
6.06
6.06
6.03
6.03
6.03
6.03
6.03
3.54
3.54
3.54
3.54
3.54
3.14
3.14
3.14
3.14
3.14
881-27MP-.71
881-27MP-1
881-27MP-1.25
881-27MP-1.44
881-27MP-1.5
881-27MP-IDL-1
881-27MP-IDL-1.25
881-27MP-IDL-1.44
881-27MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
27
27
27
27
27
6.57
6.57
6.57
6.57
6.57
6.50
6.50
6.50
6.50
6.50
3.94
3.94
3.94
3.94
3.94
3.38
3.38
3.38
3.38
3.38
Sprocket
Part Number
Idler
Part Number
881-19MP-.71
881-19MP-1
881-19MP-1.25
881-19MP-1.44
881-19MP-1.5
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
90
Molded Sprockets
Chain Guides
and Wear Strips
1.50
1.25
1.25
C
OutsideDiam.
2.09
(+.0to.04)
Idler Sprocket
C
OutsideDiam.
(+.0to.04)
InsideDiam.
Drive Sprocket
2.09
Shaftsized
boredia.
Shaftsized
boredia.
StandardKe
yseats
1.50
InsideDiam.
Material: Polyamide body with stainless steel connecting screws and nuts in nickel plated brass.
1/4
1/8
1-1-1/4dia.sh
3/8
3/16
1-7/16-1-3/4dia.
Shaft Sized
Bore Dia.
Number
of Teeth
Inside
Diameter
B
881-21P-IDL-1
881-21P-IDL-1.25
881-21P-IDL-1.44
881-21P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
21
21
21
21
4.57
4.57
4.57
4.57
5.08
5.08
5.08
5.08
2.67
2.67
2.67
2.67
881-23P-1
881-23P-1.25
881-23P-1.44
881-23P-1.5
881-23P-IDL-1
881-23P-IDL-1.25
881-23P-IDL-1.44
881-23P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
23
23
23
23
5.04
5.04
5.04
5.04
5.59
5.59
5.59
5.59
2.91
2.91
2.91
2.91
881-25P-1
881-25P-1.25
881-25P-1.44
881-25P-1.5
881-25P-IDL-1
881-25P-IDL-1.25
881-25P-IDL-1.44
881-25P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
25
25
25
25
5.52
5.52
5.52
5.52
6.06
6.06
6.06
6.06
3.14
3.14
3.14
3.14
Sprocket
Part Number
Idler
Part Number
881-21P-1
881-21P-1.25
881-21P-1.44
881-21P-1.5
Outside
Shaft Center
Diameter to Wear Surface S
C
(+0 to .04)
Save installation
time with split
sprockets and idler
wheels.
91
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.50
For
CP
C s!
d
HA
Nee
StandardKe
yseats
1/4
1/8
1-1-1/4dia.sh
3/8
3/16
1-7/16-1-3/4dia.
Save installation
time with split
sprockets and idler
wheels.
0.63
1.63
H
PitchDiam.
H
PitchDiam.
C
OutsideDiam.
Idler Sprocket
S
Drive Sprocket
C
OutsideDiam.
0.63
(+.0to.04)
1.50
(+.0to.04)
Chain Guides
and Wear Strips
pe
sha teeth al
l
a
i
c
et
ur
Spe prock r nat ter
f
o
s
f
a
g
he
es
of t ensat henin se!
t
p
u
g
com in len nged
cha prolo
1.63
Shaftsized
boredia.
Shaftsized
boredia.
Number
of Teeth
Outside
Diameter
C
Pitch
Diameter
H
Shaft Center
to Wear Surface S
(+0 to .04)
820-19MP-IDL-1
820-19MP-IDL-1.25
820-19MP-IDL-1.44
820-19MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
19
19
19
19
19
4.61
4.61
4.61
4.61
4.61
4.62
4.62
4.62
4.62
4.62
2.44
2.44
2.44
2.44
2.44
820-21MP-.71
820-21MP-1
820-21MP-1.25
820-21MP-1.44
820-21MP-1.5
820-21MP-IDL-1
820-21MP-IDL-1.25
820-21MP-IDL-1.44
820-21MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
21
21
21
21
21
5.08
5.08
5.08
5.08
5.08
5.09
5.09
5.09
5.09
5.09
2.67
2.67
2.67
2.67
2.67
820-23MP-.71
820-23MP-1
820-23MP-1.25
820-23MP-1.44
820-23MP-1.5
820-23MP-IDL-1
820-23MP-IDL-1.25
820-23MP-IDL-1.44
820-23MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
23
23
23
23
23
5.59
5.59
5.59
5.59
5.59
5.56
5.56
5.56
5.56
5.56
2.91
2.91
2.91
2.91
2.91
820-25MP-.71
820-25MP-1
820-25MP-1.25
820-25MP-1.44
820-25MP-1.5
820-25MP-IDL-1
820-25MP-IDL-1.25
820-25MP-IDL-1.44
820-25MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
25
25
25
25
25
6.06
6.06
6.06
6.06
6.06
6.03
6.03
6.03
6.03
6.03
3.14
3.14
3.14
3.14
3.14
820-27MP-.71
820-27MP-1
820-27MP-1.25
820-27MP-1.44
820-27MP-1.5
820-27MP-IDL-1
820-27MP-IDL-1.25
820-27MP-IDL-1.44
820-27MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
27
27
27
27
27
6.57
6.57
6.57
6.57
6.57
6.50
6.50
6.50
6.50
6.50
3.38
3.38
3.38
3.38
3.38
Sprocket
Part Number
Idler
Part Number
820-19MP-.71
820-19MP-1
820-19MP-1.25
820-19MP-1.44
820-19MP-1.5
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
92
Molded Sprockets
Chain Guides
and Wear Strips
1.77(Hub)
1.77(Hub)
1.50
0.63
0.63
2.09
C
OutsideDiam.
Idler Sprocket
C
OutsideDiam.
(+.0to.04)
Drive Sprocket
2.09
Shaftsized
boredia.
StandardKe
yseats
1.50
B
InsideDiam.
(+.0to.04)
B
InsideDiam.
Shaftsized
boredia.
Material: Polyamide body with stainless steel connecting screws and nuts in nickel plated brass.
1/4
1/8
1-1-1/4dia.sh
3/8
3/16
1-7/16-1-3/4dia.
Shaft Sized
Bore Dia.
Number
of Teeth
Inside
Diameter
B
820-21P-IDL-1
820-21P-IDL-1.25
820-21P-IDL-1.44
820-21P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
21
21
21
21
4.57
4.57
4.57
4.57
5.08
5.08
5.08
5.08
2.67
2.67
2.67
2.67
820-23P-1
820-23P-1.25
820-23P-1.44
820-23P-1.5
820-23P-IDL-1
820-23P-IDL-1.25
820-23P-IDL-1.44
820-23P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
23
23
23
23
5.04
5.04
5.04
5.04
5.59
5.59
5.59
5.59
2.91
2.91
2.91
2.91
820-25P-1
820-25P-1.25
820-25P-1.44
820-25P-1.5
820-25P-IDL-1
820-25P-IDL-1.25
820-25P-IDL-1.44
820-25P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
25
25
25
25
5.52
5.52
5.52
5.52
6.06
6.06
6.06
6.06
3.14
3.14
3.14
3.14
Sprocket
Part Number
Idler
Part Number
820-21P-1
820-21P-1.25
820-21P-1.44
820-21P-1.5
Outside
Shaft Center
Diameter to Wear Surface S
C
(+0 to .04)
Save installation
time with split
sprockets and idler
wheels.
93
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
h
ape
l sh t teet ral
a
i
c
e
u
e
t
k
c
p
a
S
o
r
spr s for n afte
g
he
e
of t ensat henin se!
p
u
gt
com in len nged
o
a
l
h
c
pro
1.50
1.50
3.15
For
P
CCs!
A
H ed
Ne
StandardKe
yseats
1/4
1/8
1-1-1/4dia.sh
3/8
3/16
1-7/16-1-3/4dia.
Save installation
time with split
sprockets and idler
wheels.
H
PitchDiam.
C
OutsideDiam.
C
OutsideDiam.
H
PitchDiam.
(+.0to.04)
Idler Sprocket
S
Drive Sprocket
(+.0to.04)
Chain Guides
and Wear Strips
3.15
Shaftsized
boredia.
Shaftsized
boredia.
Number
of Teeth
Outside
Diameter
C
Pitch
Diameter
H
Shaft Center
to Wear Surface S
(+0 to .04)
821-21MP-IDL-1
821-21MP-IDL-1.25
821-21MP-IDL-1.44
821-21MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
21
21
21
21
21
5.08
5.08
5.08
5.08
5.08
5.09
5.09
5.09
5.09
5.09
2.67
2.67
2.67
2.67
2.67
821-23MP-.71
821-23MP-1
821-23MP-1.25
821-23MP-1.44
821-23MP-1.5
821-23MP-IDL-1
821-23MP-IDL-1.25
821-23MP-IDL-1.44
821-23MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
23
23
23
23
23
5.59
5.59
5.59
5.59
5.59
5.56
5.56
5.56
5.56
5.56
2.91
2.91
2.91
2.91
2.91
821-25MP-.71
821-25MP-1
821-25MP-1.25
821-25MP-1.44
821-25MP-1.5
821-25MP-IDL-1
821-25MP-IDL-1.25
821-25MP-IDL-1.44
821-25MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
25
25
25
25
25
6.06
6.06
6.06
6.06
6.06
6.03
6.03
6.03
6.03
6.03
3.14
3.14
3.14
3.14
3.14
821-27MP-.71
821-27MP-1
821-27MP-1.25
821-27MP-1.44
821-27MP-1.5
821-27MP-IDL-1
821-27MP-IDL-1.25
821-27MP-IDL-1.44
821-27MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
27
27
27
27
27
6.57
6.57
6.57
6.57
6.57
6.50
6.50
6.50
6.50
6.50
3.38
3.38
3.38
3.38
3.38
Sprocket
Part Number
Idler
Part Number
821-21MP-.71
821-21MP-1
821-21MP-1.25
821-21MP-1.44
821-21MP-1.5
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
94
Sanitary Sprockets
1.50
Chain Guides
and Wear Strips
1.50
0.63
0.63
C
OutsideDiam.
H
PitchDiam.
C
OutsideDiam.
Idler Sprocket
H
PitchDiam.
Drive Sprocket
(+.0to.04)
InsideDiam.
(+.0to.04)
InsideDiam.
For
P
CCs!
A
H ed
Ne
1.67
1.67
Shaftsized
boredia.
Shaftsized
boredia.
Save installation
time with split
sprockets and idler
wheels.
Shaft Sized
Bore Dia.
Number
of Teeth
Inside
Diameter
B
Outside
Diameter
C
Pitch
Diameter
H
Shaft Center
to Wear Surface S
(+0 to .04)
880-9MP-IDL-1
880-9MP-IDL-1.25
880-9MP-IDL-1.44
880-9MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
3.74
3.74
3.74
3.74
3.74
4.33
4.33
4.33
4.33
4.33
4.39
4.39
4.39
4.39
4.39
2.95
2.95
2.95
2.95
2.95
2.33
2.33
2.33
2.33
2.33
880-10MP-.71
880-10MP-1
880-10MP-1.25
880-10MP-1.44
880-10MP-1.5
880-10MP-IDL-1
880-10MP-IDL-1.25
880-10MP-IDL-1.44
880-10MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
10
10
10
10
10
4.21
4.21
4.21
4.21
4.21
4.80
4.80
4.80
4.80
4.80
4.85
4.85
4.85
4.85
4.85
3.35
3.35
3.35
3.35
3.35
2.45
2.45
2.45
2.45
2.45
880-11MP-.71
880-11MP-1
880-11MP-1.25
880-11MP-1.44
880-11MP-1.5
880-11MP-IDL-1
880-11MP-IDL-1.25
880-11MP-IDL-1.44
880-11MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
11
11
11
11
11
4.69
4.69
4.69
4.69
4.69
5.31
5.31
5.31
5.31
5.31
5.32
5.32
5.32
5.32
5.32
3.54
3.54
3.54
3.54
3.54
2.80
2.80
2.80
2.80
2.80
880-12MP-.71
880-12MP-1
880-12MP-1.25
880-12MP-1.44
880-12MP-1.5
880-12MP-IDL-1
880-12MP-IDL-1.25
880-12MP-IDL-1.44
880-12MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
12
12
12
12
12
5.16
5.16
5.16
5.16
5.16
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
3.74
3.74
3.74
3.74
3.74
3.04
3.04
3.04
3.04
3.04
Sprocket
Part Number
Idler
Part Number
880-9MP-.71
880-9MP-1
880-9MP-1.25
880-9MP-1.44
880-9MP-1.5
95
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Molded Sprockets
2.30
2.30
Shaftsized
boredia.
StandardKe
yseats
H
PitchDiam.
H
PitchDiam.
Idler Sprocket
C
OutsideDiam.
0.63
InsideDiam.
C
OutsideDiam.
Drive Sprocket
1.50
0.63
(+.0to.04)
1.50
B
InsideDiam.
(+.0to.04)
Chain Guides
and Wear Strips
Shaftsized
boredia.
Material: Polyamide body with stainless steel connecting screws and nuts in nickel plated brass.
1/4
1/8
1-1-1/4dia.sh
3/8
3/16
1-7/16-1-3/4dia.
Shaft Sized
Bore Dia.
Number
of Teeth
Inside
Diameter
B
Outside
Diameter
C
Pitch
Diameter
H
Shaft Center to
Wear Surface S
(+0 to .04)
880-10P-IDL-1
880-10P-IDL-1.25
880-10P-IDL-1.44
880-10P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
10
10
10
10
4.21
4.21
4.21
4.21
4.80
4.80
4.80
4.80
4.85
4.85
4.85
4.85
2.57
2.57
2.57
2.57
880-12P-IDL-1
880-12P-IDL-1.25
880-12P-IDL-1.44
880-12P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
12
12
12
12
5.16
5.16
5.16
5.16
5.79
5.79
5.79
5.79
5.78
5.78
5.78
5.78
3.04
3.04
3.04
3.04
Sprocket
Part Number
Idler
Part Number
880-10P-1
880-10P-1.25
880-10P-1.44
880-10P-1.5
880-12P-1
880-12P-1.25
880-12P-1.44
880-12P-1.5
Save installation
time with split
sprockets and idler
wheels.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
96
1.50
pe th
e
sha
ial ket te tural
c
e
c
a
Sp pro
n
fter
or
s
ga
he
es f
of t ensat henin se!
p
u
gt
com in len nged
o
a
l
ch pro
0.87
0.87
C
OutsideDiam.
H
PitchDiam.
S
C
OutsideDiam.
For
(+.0to.04)
Idler Sprocket
H
PitchDiam.
(+.0to.04)
InsideDiam.
Drive Sprocket
Ne
1.50
InsideDiam.
P
CCs!
A
H ed
Chain Guides
and Wear Strips
1.67
1.67
Shaftsized
boredia.
Shaftsized
boredia.
Save installation
time with split
sprockets and idler
wheels.
Shaft Sized
Bore Dia.
Number
of Teeth
Inside
Diameter
B
Outside
Diameter
C
Pitch
Diameter
H
Shaft Center
to Wear Surface S
(+0 to .04)
882-9MP-IDL-1
882-9MP-IDL-1.25
882-9MP-IDL-1.44
882-9MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
9
9
9
9
9
3.63
3.63
3.63
3.63
3.63
4.41
4.41
4.41
4.41
4.41
4.39
4.39
4.39
4.39
4.39
2.36
2.36
2.36
2.36
2.36
2.38
2.38
2.38
2.38
2.38
882-10MP-.71
882-10MP-1
882-10MP-1.25
882-10MP-1.44
882-10MP-1.5
882-10MP-IDL-1
882-10MP-IDL-1.25
882-10MP-IDL-1.44
882-10MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
10
10
10
10
10
4.09
4.09
4.09
4.09
4.09
4.92
4.92
4.92
4.92
4.92
4.85
4.85
4.85
4.85
4.85
2.95
2.95
2.95
2.95
2.95
2.61
2.61
2.61
2.61
2.61
882-11MP-.71
882-11MP-1
882-11MP-1.25
882-11MP-1.44
882-11MP-1.5
882-11MP-IDL-1
882-11MP-IDL-1.25
882-11MP-IDL-1.44
882-11MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
11
11
11
11
11
4.57
4.57
4.57
4.57
4.57
5.39
5.39
5.39
5.39
5.39
5.32
5.32
5.32
5.32
5.32
3.35
3.35
3.35
3.35
3.35
2.85
2.85
2.85
2.85
2.85
882-12MP-.71
882-12MP-1
882-12MP-1.25
882-12MP-1.44
882-12MP-1.5
882-12MP-IDL-1
882-12MP-IDL-1.25
882-12MP-IDL-1.44
882-12MP-IDL-1.5
.71*
1
1-1/4
1-7/16
1-1/2
12
12
12
12
12
5.04
5.04
5.04
5.04
5.04
5.87
5.87
5.87
5.87
5.87
5.80
5.80
5.80
5.80
5.80
3.54
3.54
3.54
3.54
3.54
3.09
3.09
3.09
3.09
3.09
Sprocket
Part Number
Idler
Part Number
882-9MP-.71
882-9MP-1
882-9MP-1.25
882-9MP-1.44
882-9MP-1.5
97
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Molded Sprockets
0.87
2.30
2.30
Shaftsized
boredia.
StandardKe
yseats
H
PitchDiam.
C
OutsideDiam.
Idler Sprocket
H
PitchDiam.
Drive Sprocket
1.50
InsideDiam.
C
OutsideDiam.
0.87
(+.0to.04)
1.50
B
InsideDiam.
(+.0to.04)
Chain Guides
and Wear Strips
Shaftsized
boredia.
Material: Polyamide body with stainless steel connecting screws and nuts in nickel plated brass.
1/4
1/8
1-1-1/4dia.sh
3/8
3/16
1-7/16-1-3/4dia.
Shaft Sized
Bore Dia.
Number
of Teeth
Inside
Diameter
B
Outside
Diameter
C
Pitch
Diameter
H
Shaft Center to
Wear Surface S
(+0 to .04)
882-10P-IDL-1
882-10P-IDL-1.25
882-10P-IDL-1.44
882-10P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
10
10
10
10
4.09
4.09
4.09
4.09
4.92
4.92
4.92
4.92
4.85
4.85
4.85
4.85
2.57
2.57
2.57
2.57
882-12P-IDL-1
882-12P-IDL-1.25
882-12P-IDL-1.44
882-12P-IDL-1.5
1
1-1/4
1-7/16
1-1/2
12
12
12
12
5.04
5.04
5.04
5.04
5.87
5.87
5.87
5.87
5.80
5.80
5.80
5.80
3.09
3.09
3.09
3.09
Sprocket
Part Number
Idler
Part Number
882-10P-1
882-10P-1.25
882-10P-1.44
882-10P-1.5
882-12P-1
882-12P-1.25
882-12P-1.44
882-12P-1.5
Save installation
time with split
sprockets and idler
wheels.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
98
Chain Guides
and Wear Strips
Idler Sprocket
1.97
0.44
1/4
1/8
1-1-1/4dia.sh
3/8
3/16
1-7/16-1-3/4dia.
Save installation
time with split
sprockets and idler
wheels.
(+.0to.04)
M
StandardKe
yseats
C
OutsideDiam.
(+.0to.04)
Ne
0.44
InsideDiam.
For
P
CCs!
A
H ed
1.97
InsideDiam.
1.77
C
OutsideDiam.
Drive Sprocket
pe th
e
sha
ial ket te tural
c
e
c
a
Sp pro
n
fter
or
s
ga
he
es f
of t ensat henin se!
p
u
gt
com in len nged
o
a
l
ch pro
1.77
Shaftsized
boredia.
Shaftsized
boredia.
Material: Polyamide body, stainless steel connecting screws.
Shaft Sized
Bore Dia.
Number
of Teeth
Inside
Diameter
B
Outside
Diameter
C
Shaft Center
to Wear Surface S
(+0 to .04)
1700-8MP-IDL-1
1700-8MP-IDL-1.25
1700-8MP-IDL-1.44
1700-8MP-IDL-1.5
.75*
1
1-1/4
1-7/16
1-1/2
8
8
8
8
8
4.20
4.20
4.20
4.20
4.20
5.37
5.37
5.37
5.37
5.37
3.15
3.15
3.15
3.15
3.15
2.09
2.09
2.09
2.09
2.09
1700-10MP-.75
1700-10MP-1
1700-10MP-1.25
1700-10MP-1.44
1700-10MP-1.5
1700-10MP-IDL-1
1700-10MP-IDL-1.25
1700-10MP-IDL-1.44
1700-10MP-IDL-1.5
.75*
1
1-1/4
1-7/16
1-1/2
10
10
10
10
10
5.39
5.39
5.39
5.39
5.39
6.50
6.50
6.50
6.50
6.50
4.33
4.33
4.33
4.33
4.33
2.72
2.72
2.72
2.72
2.72
1700-13MP-.75
1700-13MP-1
1700-13MP-1.25
1700-13MP-1.44
1700-13MP-1.5
1700-13MP-IDL-1
1700-13MP-IDL-1.25
1700-13MP-IDL-1.44
1700-13MP-IDL-1.5
.75*
1
1-1/4
1-7/16
1-1/2
13
13
13
13
13
7.35
7.35
7.35
7.35
7.35
8.46
8.46
8.46
8.46
8.46
5.91
5.91
5.91
5.91
5.91
3.68
3.68
3.68
3.68
3.68
Sprocket
Part Number
Idler
Part Number
1700-8MP-.75
1700-8MP-1
1700-8MP-1.25
1700-8MP-1.44
1700-8MP-1.5
99
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
VG-1568
Included
Flexible T-bolt
mounting won't
strip or turn
during installation.
90 transfer using
single roller transfer
assembly.
VG-2RT-6
VG-3RTC-6
VG-4RT-6
Head to tail transfer
using two roller transfer
assemblies positioned
back-to-back.
VG-2RT-9
VG-3RTC-9
VG-4RT-9
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
100
.14
.14
.93
.45
.93
2.00
.05 .26
6.1
.51
8.8
.45
.87
.42
.12
Chain Guides
and Wear Strips
.12
.42
.15
R3.0
1.13
VG-2RT-6
1.13
T-head
bolt
VG-2RT-9
5/16
Part Number
.87
Length (in.)
VG-2RT-6
Part Number
Length (in.)
VG-RT-9
Roller Transfers
3RTC DynaPlate
3 roller rows. Available in 6 or 9 inch widths.
.12
.14
.12
.14
.93
.93
1.54
.05
6.1
.26
.51
8.8
.87
.77
.77
.15
.77
VG-3RTC-6
Part Number
Length (in.)
VG-3RTC-6
.77
Roller Transfers
4RT DynaPlate
4 roller rows with sloped entry. Available in 6 or 9 inch widths.
.12
VG-3RTC-9
5/16
T-head
bolt
Part Number
Length (in.)
VG-3RTC-9
.14
.12
.14
.93
.93
.05
6.1
.78
3.10
.26
8.8
.51
.78
.87
.15
R3.0
1.19
T-head
bolt
5/16
1.13
1.13
VG-4RT-6
1.19
VG-4RT-9
1.97
Part Number
Length (in.)
VG-4RT-6
Part Number
Length (in.)
VG-4RT-9
DynaPlate Combinations
Mix and match for best transfer lengths and widths
5.10
4.00
VG-2RT
VG-2RT
VG-2RT
5.54
VG-2RT
VG-4RT
VG-2RT
VG-4RT
7.08
VG-2RT
VG-3RTC
VG-2RT
6.64
6.20
VG-4RT
VG-3RTC
VG-3RTC
VG-4RT
7.74
VG-3RTC
VG-4RT
VG-2RT
101
VG-3RTC
VG-4RT
0.05
0.79
R3.00
0.45
M6
0.47
0.69
Length (in.)
0.43
3.35
3.35
Roller
0.69
1.97
16777
1.95
0.05
0.79
R3.00
M6
0.11
0.45
0.11
0.48
0.92
0.69
Roller
Length (in.)
0.43
3.35
3.35
1.97
16770
0.69
2.90
0.05
0.79
R3.00
0.45
M6
0.11
0.69
1.87
0.11
0.96
Part Number
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
102
3.35
1.97
16772
0.69
Chain Guides
and Wear Strips
Roller
Length (in.)
0.43
3.35
0.05
1.47
0.79
R3.00
0.45
M6
0.69
0.47
4.53
16778
Roller
Length (in.)
0.43
4.53
0.69
3.15
Part Number
0.79
0.05
1.95
R3.00
M6
0.45
0.11
0.11
0.69
0.48
0.92
Length (in.)
0.43
4.53
4.53
Roller
0.69
3.15
16771
0.05
2.90
0.79
R3.00
0.45
M6
0.11
0.69
1.87
0.96
Roller
Length (in.)
0.43
4.53
4.53
3.15
16773
0.69
103
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
16770-SS
16772-SS
2.90
0.05
0.79
0.79
R 3.00
R 3.00
0.45
0.11
0.46
0.11
0.11
0.11
0.96
0.69
1.87
0.69
0.69
1.97
3.35
0.69
0.69
0.48
0.93
1.97
0.45
M6
1.97
M6
0.45
M6
3.35
R 3.00
0.05
0.79
1.95
0.05
0.69
1.47
Part Number
Roller
Length (in.)
Part Number
Roller
Length (in.)
Part Number
Roller
Length (in.)
16777-SS
0.43
3.35
16770-SS
0.43
3.35
16772-SS
0.43
3.35
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
104
3.35
16777-SS
Chain Guides
and Wear Strips
16771-SS
16773-SS
1.95
0.79
0.79
R 3.00
0.45
M6
M6
0.11
0.47
0.45
M6
0.11
0.11
0.48
0.93
0.11
0.96
0.69
0.69
4.53
3.15
0.69
0.69
1.87
3.15
0.69
0.69
3.15
0.05
R 3.00
0.45
R 3.00
2.90
0.05
0.79
0.05
4.53
1.47
Part Number
Roller
Length (in.)
Part Number
Roller
Length (in.)
Part Number
Roller
Length (in.)
16778-SS
0.43
4.53
16771-SS
0.43
4.53
16773-SS
0.43
4.53
105
4.53
16778-SS
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
16777-SSA
16770-SSA
16772-SSA
1.95
2.90
0.05
0.45
R 3.00
0.45
M6
0.11
0.46
0.11
0.11
0.11
0.96
0.69
0.69
0.69
0.69
0.69
1.87
1.97
3.35
0.69
0.48
0.93
1.97
0.45
M6
3.35
M6
0.79
0.79
R 3.00
R 3.00
0.05
0.79
Part Number
Roller
Length (in.)
Part Number
Roller
Length (in.)
Part Number
Roller
Length (in.)
16777-SSA
0.43
3.35
16770-SSA
0.43
3.35
16772-SSA
0.43
3.35
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
106
3.35
0.05
1.97
1.47
Chain Guides
and Wear Strips
16778-SSA
16771-SSA
16773-SSA
1.95
0.79
0.79
0.79
R 3.00
0.45
M6
M6
0.11
0.47
0.11
0.11
0.11
0.96
0.69
1.87
3.15
0.69
0.69
0.69
4.53
3.15
0.69
0.69
0.45
M6
0.48
0.93
3.15
0.05
R 3.00
0.45
R 3.00
2.90
0.05
Part Number
Roller
Length (in.)
Part Number
Roller
Length (in.)
Part Number
Roller
Length (in.)
16778-SSA
0.43
4.53
16771-SSA
0.43
4.53
16773-SSA
0.43
4.53
107
4.53
0.05
4.53
1.47
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.95
2.90
2.90
0.47
0.05
0.79
0.11
1.44
0.11
1.91
3.35
3.35
4.53
0.11
4.53
0.11
3.35
0.11
0.97
2.90
0.47
0.05
0.79
0.05
1.95
0.47
0.79
1.95
4.53
Chain Guides
and Wear Strips
0.11
1.95
4.85
2.90
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
108
5.79
2.90
2.90
Return Rollers
Sanitary, watertight, sealed
Excellent wear and chemical resistance
Low noise, low friction
Chain Guides
and Wear Strips
Our conveyor chain return rollers are made from impact resistant material. They
are highly resistant to chemicals and have self lubricating characteristics. A
urethane sleeve or ribbed rubber cover option is available for better
traction, low noise, and long service life. Other options
include a completely solid version, plus side
flanges for each type of roller.
3.25
Part Number
R3-18-50
R3-18-60
R3-75-50
R3-75-60
R3-20-50
R3-20-60
R3
Return Roller
3.15
Part Number
1.61
R15-18-50
R15-18-60
R15-75-50
R15-75-60
R15-20-50
R15-20-60
R15
Return Roller
1.97
2.36
1.97
2.36
1.97
2.36
1.97
2.36
1.97
2.36
1.97
2.36
For Use
With
20 mm
Dia. Shaft
F
Flange
Dia.
E
Roller
Dia.
2.56
2.95
2.56
2.95
2.56
2.95
1.97
2.36
1.97
2.36
1.97
2.36
For Use
With
20 mm
Dia. Shaft
F
Flange
Dia.
E
Roller
Dia.
2.56
2.95
2.56
2.95
2.56
2.95
1.97
2.36
1.97
2.36
1.97
2.36
1.48
Part Number
3.38
Return
Roller
with Flange
RF3
For Use
With
3/4 in.
Dia. Shaft
3.15
1.69
Part Number
RF15
Return Roller
with Flange
RF3-18-50
RF3-18-60
RF3-75-50
RF3-75-60
RF3-20-50
RF3-20-60
For Use
With 18 mm
or 11/16 in.
Dia. Shaft
RF15-18-50
RF15-18-60
RF15-75-50
RF15-75-60
RF15-20-50
RF15-20-60
For Use
With 18 mm
or 11/16 in.
Dia. Shaft
For Use
With
3/4 in.
Dia. Shaft
1.51
109
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Return Rollers
Material: Impact resistant, green HDPE with urethane cover.
3/4" roller is orange HDPE.
R3U
Part Number
3.15
1.61
R15U
Part Number
1.48
3.38
RF3U
E
Return Roller
with Flange
and Urethane
Surface
Part Number
3.15
RF15U
Part Number
1.51
2.21
2.60
2.21
2.60
2.21
2.60
For Use
With
20 mm
Dia. Shaft
F
Flange
Dia.
E
Roller
Dia.
2.56
2.95
2.56
2.95
2.56
2.95
2.21
2.60
2.21
2.60
2.21
2.60
For Use
With
20 mm
Dia. Shaft
F
Flange
Dia.
E
Roller
Dia.
2.56
2.95
2.56
2.95
2.56
2.95
2.21
2.60
2.21
2.60
2.21
2.60
For Use
With 18 mm
or 11/16 in.
Dia. Shaft
For Use
With
3/4 in.
Dia. Shaft
For Use
With 18 mm
or 11/16 in.
Dia. Shaft
For Use
With
3/4 in.
Dia. Shaft
2.21
2.60
2.21
2.60
2.21
2.60
3.25
Part Number
R3B
Return Roller
with Rubber
Surface
RF15U-18-50
RF15U-18-60
RF15U-75-50
RF15U-75-60
RF15U-20-50
RF15U-20-60
Return Roller
with Flange
and Urethane
Surface
RF3U-18-50
RF3U-18-60
RF3U-75-50
RF3U-75-60
RF3U-20-50
RF3U-20-60
1.69
R15U-18-50
R15U-18-60
R15U-75-50
R15U-75-60
R15U-20-50
R15U-20-60
Return Roller
with Urethane
Surface
R3U-18-50
R3U-18-60
R3U-75-50
R3U-75-60
R3U-20-50
R3U-20-60
Return Roller
with Urethane
Surface
3.15
R3B-18-50
R3B-18-60
R3B-75-50
R3B-75-60
R3B-20-50
R3B-20-60
1.97
2.36
1.97
2.36
1.97
2.36
1.61
Part Number
R15B
E
Chain Guides
and Wear Strips
3.25
Return Roller
with Rubber
Surface
1.48
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
110
R15B-18-50
R15B-18-60
R15B-75-50
R15B-75-60
R15B-20-50
R15B-20-60
1.97
2.36
1.97
2.36
1.97
2.36
Return Rollers
Material: Impact resistant, green HDPE with rubber cover.
3/4" roller is orange HDPE.
RF3B
Return Roller
with Flange
and Rubber
Surface
Part Number
F
RF3B-18-50
RF3B-18-60
RF3B-75-50
RF3B-75-60
RF3B-20-50
RF3B-20-60
3.15
1.69
RF15B-18-50
RF15B-18-60
RF15B-75-50
RF15B-75-60
RF15B-20-50
RF15B-20-60
Return Roller
with Flange
and Rubber
Surface
1.51
1.97
2.36
1.97
2.36
1.97
2.36
Part Number
RF15B
2.56
2.95
2.56
2.95
2.56
2.95
2.56
2.95
2.56
2.95
2.56
2.95
1.97
2.36
1.97
2.36
1.97
2.36
3.25
Part Number
RP3-18-50
RP3-18-60
RP3-75-50
RP3-75-60
RP3-20-50
RP3-20-60
RP3
Solid
Return Roller
3.15
1.97
2.36
1.97
2.36
1.97
2.36
3.25
Part Number
RP3B
E
Solid Return
Roller with
Rubber Surface
RP3B-18-50
RP3B-18-60
RP3B-75-50
RP3B-75-60
RP3B-20-50
RP3B-20-60
3.15
1.97
2.36
1.97
2.36
1.97
2.36
4.5
RF
Roller Flange
1.97
Material: Impact resistant, green HDPE.
Flange for 3/4 inch shaft is orange HDPE.
Part Number
RF-18-70
RF-75-70
RF-20-70
3.25
.08
3.35
.10
1.97
3.25
1.97
3.25
3.35
1.97
.10
3.25
.08
2.75
2.75
2.75
111
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
3.38
Chain Guides
and Wear Strips
MBG
Modular Conveyor Belt
Side Guides
Aluminum and UHMW guide rail for use in guiding the sides of selected
plastic modular conveyor belts through turns. Ultra-low friction. Top and
bottom capture of belt. Easily formed into curves with the Valu Guide Rail
Bending Machine. Available in 10 ft. lengths. Minimum radius 18" (inside
edge). Replaceable UHMW strips.
.53
.56
1/2"
Modular
Belt
1.33
.50 .38
VG-1568-
Part Number
Material
Length (ft.)
VG-MBG-50-NS-10
VG-MBG-50-10
Nolu-S
UHMW
10
10
Insert Replacements
Material
Length (ft.)
VG-PMBG-50-NS-10
VG-PMBG-50-10
Nolu-S
UHMW
10
10
.71
RS-13
1568
VG-RS-13
VG-6911B
Outside Curves
1 roller
2 rollers
VG-6911A
VG-6911B
VG-6911A
Inside Curves
1 roller
2 rollers
VG-6911B
VG-6911A
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
T-head
bolts
112
Part Number
VG-1568-01
VG-1568-02
VG-1568-03
VG-1568-04
.64
.76
1.01
1.26
Wear Strip
SBG
Aluminum and UHMW guide rail for use in guiding the sides
and supporting the middle of modular conveyor belts. Ultra-low
friction bottom and side support of belt. Easily formed into
curves with the Valu Guide Rail Bending Machine. Available in
10 ft. lengths. Minimum radius 18" (inside edge). Replaceable
UHMW strips.
Chain Guides
and Wear Strips
Conveyor Belt
Side Guides and Wear Strips
VG-BWS-125
1.0
.13
1.25
1.03
.44
.81
.38
.50
.50
VG-1568-
VG-1568-
Part Number
Part Number
VG-SBG-50-10
VG-BWS-125-10
VG-PSBG-50-10
VG-PBWS-125-10
VG-6911C
10
Length (ft.)
10
T-head
bolts
Length (ft.)
1568
RS-14
VG-RS-14
.87
.71
VG-6911C
Outside Curves
Inside Curves
VG-6911C
113
Part Number
VG-1568-01
VG-1568-02
VG-1568-03
VG-1568-04
.64
.76
1.01
1.26
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
SSUT
Conveyor Belt Side Guides
Guide rail for use in guiding the sides of
selected conveyor belts. Ultra-low friction.
Easily formed into corners with the Valu Guide
Rail Bending Machine.
Material: Self-lubricating Nolu-S UHMW insert and stainless
steel sheath, 14 gauge.
Part Number
VG-SSUT-1.00-S-10
VG-SSUT-1.30-S-10
Belt Thickness
Length (ft.)
1/2"
3/4"
10
10
.70
.48
.80
.56
1.30
1.0
VG-699-1.3
VG-018
699
Bending Machine Rollers
VG-SSUT rail can be quickly and easily formed to a desired radius without distortion to the rail or
damage to the guiding surface. Bending Machines (page 198) and the accompanying rollers can
form inside or outside curves that are smooth and professional.
See Bending Machines on page 198.
RS-11
RS-12
VG-RS-11
VG-SSUT-1.30
Conveyor belt side guide
Minimum radius: 18 inches
VG-691B
VG-RS-12
VG-699-1.3
Outside Curves
1 roller
2 rollers
Inside Curves
1 roller
2 rollers
VG-699-1.3 VG-691B
VG-691B VG-699-1.3
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
114
VG-SSUT-1.00
Conveyor belt side guide
Minimum radius: 18 inches
VG-691B
VG-699-1.0
Outside Curves
1 roller
2 rollers
Inside Curves
1 roller
2 rollers
VG-699-1.0 VG-691B
VG-691B VG-699-1.0
Serpentine Chain
Return System
Patent # 5,190,145
ValuFlex is a patented, serpentine wear strip system that solves conveyor return problems associated
with metal and plastic slat top chains and wide modular type belts. The ValuFlex system uses standardized parts that help reduce design and fabrication time. ValuFlex can be easily installed, new or retrotted,
without the use of special tools. The absence of moving parts means less noise, less wear, and signicantly
lower maintenance and replacement cost. As added benets, serpentines increase the useful life of chains
and provide increased chain stability at higher speeds. The serpentine pattern distributes wear evenly
across belt surfaces, providing trouble-free service and increased belt life. Serpentine systems
permit high speed operation by eliminating the pulsation inherent in some roller returns.
ValuFlex is also used as a light duty support grid for lightly loaded, modular style
belts and has been proven useful when used with other Valu Guide components
as a hold down system for tops, lids, or aps on air or mechanical conveyors. Low friction ValuFlex UHMW serpentine proles last for years
without the need for lubrication or maintenance, and operate
equally well in dry or wet environments.
Patented
Simplicity!
Chain Guides
and Wear Strips
TM
C
B
C
B
A
Detail C
Detail B
Detail A
115
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
20 inches
Single profile
pair up to 7.5"
Spreads
out wear
across
chain!
System Considerations
Five profile pairs
range from 50" - 60"
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
116
Cost-Effective/Labor Saving
Flexible Design/Standard Parts
Trouble Free/Secure
Guaranteed Materials
Long Life/Lower Chain Wear
Low/No Maintenance
Stable at High Speeds
Universal Belt Compatibility
Industry Proven Reliable
Roller
TM
Chain Guides
and Wear Strips
VF-CRC
VF-3834-
VF-CRC-T-
p
Sna er
eth
Tog uction
str
Con
3834
VF-CR-38100
12"
12.1 lbs/lin.ft
23.2 lbs/lin.ft
18"
4.0 lbs/lin.ft
7.1 lbs/lin.ft
24"
2.3 lbs/lin.ft
3.7 lbs/lin.ft
3/8
Material: UHMW.
3/4
Part Number
Securely snaps and locks into ValuFlex clips and return shoes providing a
smooth and level return surface.
38100
VF-CR-3834
Height (in.)
Length
3/4
3/4
50
100
Height (in.)
Length
1
1
50
100
VF-CR-3834-50
VF-CR-3834-100
3/8
Patent # 336,712
1.0
Part Number
VF-CR-38100-50
VF-CR-38100-100
Securely snaps and locks into ValuFlex clips and return shoes providing a
smooth and level return surface.
Part Number
CRP
Full Round Spacer
VF-CRP-325
VF-CRP-450
VF-CRP-600
VF-CRP-750
VF-CRP-8FT
Rod
1/2 or 9/16*
1/2 or 9/16*
1/2 or 9/16*
1/2 or 9/16*
1/2 or 9/16*
VF-CRP5-325
5/8
VF-CRP5-450
5/8
VF-CRP5-600
5/8
VF-CRP5-750
5/8
VF-CRP5-8FT
5/8
*1/4" sch. 80 pipe diameter.
117
Chain
Width
3.25
4.50
6.0
7.50
2.3
3.55
5.05
6.05
8'
96
3.25
4.50
6.0
7.50
2.3
3.55
5.05
6.05
8'
96
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
1.80
CRC
Part Number
VF-CRC-12
VF-CRC-916
VF-CRC-58
SnapLock Clip
Securely locks ValuFlex
profiles onto rod or pipe.
CRCP
Rod
1.30
1.30
1.43
.45
.45
.50
1/2
1/4 SCH 80
5/8 or M16
SnapLock Clips
work with both
profile sizes!
Patent # 340,564
W
1.80
SnapLock Clip
with pin
Part Number
VF-CRCP-12 1.30
VF-CRCP-916 1.30
VF-CRCP-58 1.43
Rod
.45
.45
.50
1/2
1/4 SCH 80
5/8 or M16
.33
CRA
VF-3834
VF-38100
Part Number
.85
SnapLock Clip
Fastens onto 7 to 11 gauge
angle bar cross supports.
Locks ValuFlex profiles
securely in place. Clip is held
secure with VG-750-01 drive
rivet, which is included.
1.00
VF-CRA
for
VG-750-01
1.23
1.08
.21
.58
.17
1.0
cL
VG-750-01
drive rivet
.25
1.0
Patent # 6,533,108
Single Lane
Single Lane
Multi-chain
VF-CRC-12
CRC-T
VF-CRCP-12
Material: Black acetal.
PinchLock Clip
Part Number
VF-CRC-T
1.19
.75
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.37
.88
118
PinchLock Clips
work with both
profile sizes!
Chain Guides
and Wear Strips
45
.25"
Pinning hole
.64"
Mounting holes for
cross rods
CRS-34
Material: UHMW.
7.56
3.00
2.00
6.50 R
.50
Part Number
.75
2.50
CRS-100
1.0
2.50
Profile
VF-CR-3834
VF-CR-3834
VF-CR-3834
1/2
5/8
9/16*
VF-CRS-100
VF-CR-38100
VF-CRS-100-58
VF-CR-38100
VF-CRS-100-916 VF-CR-38100
* 1/4" sch. 80 pipe diameter
1/2
5/8
9/16*
VF-CRS-34
VF-CRS-34-58
VF-CRS-34-916
2.50
1 pin included
with each shoe
2.50
CR4
Length
VF-CR4-SS-0325-516
VF-CR4-SS-0325-38
VF-CR4-SS-0400-516
VF-CR4-SS-0400-38
VF-CR4-SS-0450-516
VF-CR4-SS-0450-38
VF-CR4-SS-0600-516
VF-CR4-SS-0600-38
VF-CR4-SS-0750-516
VF-CR4-SS-0750-38
119
Length
Tap
3.50
3.50
4.25
4.25
4.75
4.75
6.25
6.25
7.75
7.75
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
VF-CR4.5-SS-0325-38
VF-CR4.5-SS-0400-38
VF-CR4.5-SS-0450-38
VF-CR4.5-SS-0600-38
VF-CR4.5-SS-0750-38
5/8" Part Number
VF-CR5-SS-0325-38
VF-CR5-SS-0400-38
VF-CR5-SS-0450-38
VF-CR5-SS-0600-38
VF-CR5-SS-0750-38
Length
Tap
3.50
4.25
4.75
6.25
7.75
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
Length
Tap
3.50
4.25
4.75
6.25
7.75
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
th
Twice
Life!
B
A
B
A unique, patented feature of this chain return shoe is its
reversibility. When side A is worn past its useful life, simply
unfasten the profile, rotate the shoe so side B faces up
and reattach the profile - it's a built-in spare.
Patent # 5,310,047
Smooth transition
for wide belts
CRSR-34
Material: UHMW.
6.25
Reversible Chain
Return Shoe
For use with VF-CR-3834 profile.
1.94
Designed primarily for slat-top hinged
chains. Shoe can be used individually
with the appropriate chain or ganged
together for wider belts.
2.00
6.50 R
Pinning Hole
2X .25 R
Mounting hole
for 1/2" square rod
7.00
2 pins included
with each shoe
3.50
2.38
Width
4X.25
6.50 R
Pinning Hole
2X .25 R
Mounting hole
for 1/2" square rod
Width (in.)
Part Number
3
3 3/4
4 1/4
5 3/4
7
Width (in.)
VF-CRSR-100-0325
VF-CRSR-100-0400
VF-CRSR-100-0450
VF-CRSR-100-0600
VF-CRSR-100-0750
1.23
2.47
Part Number
VF-CRSR-34-0325
VF-CRSR-34-0400
VF-CRSR-34-0450
VF-CRSR-34-0600
VF-CRSR-34-0750
.97
CRSR-100
Reversible Chain
Return Shoe
3.13
Width
4X.25
3
3 3/4
4 1/4
5 3/4
7
2 pins included
with each shoe
Part Number
CRQ
Square
Cross Rod
Used with VF-CRSR chain
return shoes, they fit into a
square slot in the return shoe
which is easily centered with
the snap rings provided.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Length
120
VF-CRQ-SS-0325-516
VF-CRQ-SS-0325-38
VF-CRQ-SS-0400-516
VF-CRQ-SS-0400-38
VF-CRQ-SS-0450-516
VF-CRQ-SS-0450-38
VF-CRQ-SS-0600-516
VF-CRQ-SS-0600-38
VF-CRQ-SS-0750-516
VF-CRQ-SS-0750-38
Length
Tap
3.50
3.50
4.25
4.25
4.75
4.75
6.25
6.25
7.75
7.75
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
When necessary, splicing is quick, easy, and trouble-free. The overlap method pictured
here is preferred. Pick a convenient cross rod and terminate the ValuFlex serpentine
profiles 1" to 2" past the ends of the clips. Attach new clips on the same rod, inside
those just mentioned. Begin the new ValuFlex profiles, again leaving 1" to 2" ahead of
the clip. Before snapping the profiles into place, be sure to bevel the edges to avoid any
possible snag by the chain or belt (as shown). Never try to butt-splice two profiles by
joining them into the same clip.
Bevel
Hold-Down
Application
Section A-A
Installation Instructions
C
B
A
2. Install all cross rods (with attached SnapLock clips and appropriate spacers)
except the ones positioning the return shoes.
3. Thread the ValuFlex serpentine profiles (pg. 117) through the conveyor frame and
fasten the profiles to the return shoes (A) (pg. 119-120).
4. Mount shoes on the appropriate cross rods and fasten the rods in place.
5. Starting at the return shoe, move to the next cross rod and snap the serpentine profile into the clips. If intermediate PinchLock clips (B) (pg. 118) are being used, install the first one now between the return shoe(s) and the first
cross rod/SnapLock assembly.
6. Repeat this process, first installing the profile into the next cross rod/SnapLock clip assembly and then installing
a PinchLock clip between two new secured rod locations.
121
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
Splicing
Chain Direction
Chain Guides
and Wear Strips
Valu Guide rail can be used as a guide or wear strip for wide
metal or plastic belting and slat top chain. These rail shapes
are also shown with conveyor guide rail on page 182-185.
1.25
T-1.25
.81
Stainless
VG-SST-1.25-8
VG-SST-1.25-10
VG-SST-1.25-12
VG-SST-1.25-20
Galvanized
VG-GST-1.25-8
VG-GST-1.25-10
VG-GST-1.25-12
VG-GST-1.25-20
Length* (ft.)
8
10
12
20
.67
1.25
TS-1.25
.81
VG-SSTS-1.25-8
VG-SSTS-1.25-10
VG-SSTS-1.25-12
VG-SSTS-1.25-20
8
10
12
20
.67
1.25
1.0
.38
LT
1.21
.81
VG-SSLT-1.0x.38-8
VG-SSLT-1.0x.38-10
VG-SSLT-1.0x.38-12
VG-SSLT-1.0x.38-20
VG-GSLT-1.0x.38-8
VG-GSLT-1.0x.38-10
VG-GSLT-1.0x.38-12
VG-GSLT-1.0x.38-20
8
10
12
20
.67
1.25
1.00
LTS
.38
.81
.67
CA
VG-SSLTS-1.0x.38-8
VG-SSLTS-1.0x.38-10
VG-SSLTS-1.0x.38-12
VG-SSLTS-1.0x.38-20
8
10
12
20
Y
RR
RN
TU
RE
VG-SSLT-1.0x.38- rail
VG-SST-1.25- rail
VG-012-01
single rail clamps
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
122
Length* (ft.)
8
10
12
20
VG-SST-1.25-NS-8
VG-SST-1.25-NS-10
VG-SST-1.25-NS-12
VG-SST-1.25-NS-20
VG-SST-1.25-B-8
VG-SST-1.25-B-10
VG-SST-1.25-B-12
VG-SST-1.25-B-20
VG-SST-1.25-SD-8
VG-SST-1.25-SD-10
VG-SST-1.25-SD-12
VG-SST-1.25-SD-20
VG-SSTS-1.25-NS-8
VG-SSTS-1.25-NS-10
VG-SSTS-1.25-NS-12
VG-SSTS-1.25-NS-20
VG-SSTS-1.25-B-8
VG-SSTS-1.25-B-10
VG-SSTS-1.25-B-12
VG-SSTS-1.25-B-20
VG-SSTS-1.25-SD-8
VG-SSTS-1.25-SD-10
VG-SSTS-1.25-SD-12
VG-SSTS-1.25-SD-20
8
10
12
20
VG-SSLT-1.0x.38-NS-8
VG-SSLT-1.0x.38-NS-10
VG-SSLT-1.0x.38-NS-12
VG-SSLT-1.0x.38-NS-20
VG-SSLT-1.0x.38-B-8
VG-SSLT-1.0x.38-B-10
VG-SSLT-1.0x.38-B-12
VG-SSLT-1.0x.38-B-20
VG-SSLT-1.0x.38-SD-8
VG-SSLT-1.0x.38-SD-10
VG-SSLT-1.0x.38-SD-12
VG-SSLT-1.0x.38-SD-20
8
10
12
20
VG-SSLTS-1.0x.38-NS-8
VG-SSLTS-1.0x.38-NS-10
VG-SSLTS-1.0x.38-NS-12
VG-SSLTS-1.0x.38-NS-20
VG-SSLTS-1.0x.38-B-8
VG-SSLTS-1.0x.38-B-10
VG-SSLTS-1.0x.38-B-12
VG-SSLTS-1.0x.38-B-20
VG-SSLTS-1.0x.38-SD-8
VG-SSLTS-1.0x.38-SD-10
VG-SSLTS-1.0x.38-SD-12
VG-SSLTS-1.0x.38-SD-20
8
10
12
20
Important Note:
When Valu Guide Rail is used as a
wear strip, the UHMW insert should be
fastened to the metal sheath at the leading end of the rail. Using a sheet metal
screw through the back of the sheath
or a heavy wire pin from the side should be adequate. This will
prevent the insert from sliding within the sheath in the event the
chain accidentally catches on a leading edge. This also allows for
thermal expansion and contraction of the UHMW insert.
123
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
Static
Dissipating
Black
Gray Nolu-S
Chain Guides
and Wear Strips
1.60
.30
T-1.60
.35
.81
Length* (ft.)
Stainless
Galvanized
VG-SST-1.60-8
VG-SST-1.60-10
VG-SST-1.60-12
VG-SST-1.60-20
VG-GST-1.60-8
VG-GST-1.60-10
VG-GST-1.60-12
VG-GST-1.60-20
8
10
12
20
VG-SST-1.70-8
VG-SST-1.70-10
VG-SST-1.70-12
VG-SST-1.70-20
VG-GST-1.70-8
VG-GST-1.70-10
VG-GST-1.70-12
VG-GST-1.70-20
8
10
12
20
VG-SST-2.25-8
VG-SST-2.25-10
VG-SST-2.25-12
VG-SST-2.25-20
VG-GST-2.25-8
VG-GST-2.25-10
VG-GST-2.25-12
VG-GST-2.25-20
8
10
12
20
VG-SSTG-02-8
VG-SSTG-02-10
VG-SSTG-02-12
VG-SSTG-02-20
VG-GSTG-02-8
VG-GSTG-02-10
VG-GSTG-02-12
VG-GSTG-02-20
8
10
12
20
.67
1.70
T-1.70
.12
.12
.31
.81
.38
.67
T-2.25
2.25
.31
.81
.67
1.19
TG
.60
1.06
Economical alternative to
other chain guiding systems.
For use with 882-4-1/2 and
882-LBP-3-3/4 style chains.
CA
.67
Y
RR
RN
TU
RE
VG-SSLT-1.0x.38- rail
VG-SST-1.25- rail
See Related
Products
VG-012-01
single rail clamps
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
124
VG-SST-1.60-NS-8
VG-SST-1.60-NS-10
VG-SST-1.60-NS-12
VG-SST-1.60-NS-20
VG-SST-1.60-B-8
VG-SST-1.60-B-10
VG-SST-1.60-B-12
VG-SST-1.60-B-20
VG-SST-1.60-SD-8
VG-SST-1.60-SD-10
VG-SST-1.60-SD-12
VG-SST-1.60-SD-20
8
10
12
20
VG-SST-1.70-NS-8
VG-SST-1.70-NS-10
VG-SST-1.70-NS-12
VG-SST-1.70-NS-20
VG-SST-1.70-B-8
VG-SST-1.70-B-10
VG-SST-1.70-B-12
VG-SST-1.70-B-20
VG-SST-1.70-SD-8
VG-SST-1.70-SD-10
VG-SST-1.70-SD-12
VG-SST-1.70-SD-20
8
10
12
20
VG-SST-2.25-NS-8
VG-SST-2.25-NS-10
VG-SST-2.25-NS-12
VG-SST-2.25-NS-20
VG-SST-2.25-B-8
VG-SST-2.25-B-10
VG-SST-2.25-B-12
VG-SST-2.25-B-20
VG-SST-2.25-SD-8
VG-SST-2.25-SD-10
VG-SST-2.25-SD-12
VG-SST-2.25-SD-20
8
10
12
20
VG-SSTG-02-NS-8
VG-SSTG-02-NS-10
VG-SSTG-02-NS-12
VG-SSTG-02-NS-20
VG-SSTG-02-B-8
VG-SSTG-02-B-10
VG-SSTG-02-B-12
VG-SSTG-02-B-20
VG-SSTG-02-SD-8
VG-SSTG-02-SD-10
VG-SSTG-02-SD-12
VG-SSTG-02-SD-20
8
10
12
20
4.125
4.125
125
VG-SST-1.70-
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
Static
Dissipating
Black
Gray Nolu-S
1.57
0.79
Part Number
Length
19048C
19048
19071
19070
3M (10 ft.)
6M (20 ft.)
0.16
1.69
Material: UHMW
Part Number
0.13
0.11
0.33
0.12
0.11
0.13
0.06
1.18
0.39
0.16
1.18
0.12
1.14
0.39
0.12
The following metal channels can be used with the UHMW inserts listed in this group. These rails are commonly used as guide rails or
support members under belting and table top chain. Mounting clamps and accessories designed for these metal channels are listed
below.
0.47
Material: UHMW
Color
Length
Black
Green
6M (20 ft.)
6M (20 ft.)
Part Number
19073
19072
Color
Length
Black
Green
6M (20 ft.)
6M (20 ft.)
0.59
Material: Polyamide
Part Number
14109
0.67
0.59
A
0.14
B
0.79
0.63
0.04
0.63
1.97
1.18
0.67
Chain Guides
and Wear Strips
Material: Polyamide
A
.51
.32
.24
Fastener
Part Number
14111
5/16
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
126
Fastener
.51
.32
.24
5/16
Chain Guides
and Wear Strips
5.98
0.98
0.28
1.26
0.24
2.17
0.39
0.63
0.16
0.47
1.18
0.25
0.59
0.39
1.18
0.67
1.57
0.79
0.63
0.98
1/4
5.98
0.98
1.26
0.24
2.17
0.39
0.63
0.16
0.47
1.18
0.12
14110
0.28
14110
0.25
0.63
0.67
1.57
0.79
0.39
1.18
0.59
0.12
0.98
14110T
127
1/4
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
Availa
bl
10ft. le e in
ngths
1-1/2"
3/4"
3"
1/8"
1"
2-1/2"
2"
1/2"
1"
1-1/2"
1/4"
1-1/2"
1/8"
Part Number
HS-0208-10
HS-0212-10
HS-0216-10
HS-0220-10
HS-0224-10
HS-0228-10
HS-0232-10
HS-0240-10
HS-0248-10
HS-0264-10
3/16"
Width
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
4
5/8"
HS-1012-10
HS-1016-10
HS-1020-10
HS-1024-10
HS-1028-10
HS-1032-10
HS-1040-10
HS-1048-10
HS-1056-10
HS-1064-10
1/4"
Width
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
4
3/4"
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4
1-3/4"
HS-2832-10
HS-2840-10
HS-2848-10
HS-2856-10
HS-2864-10
HS-2880-10
HS-2896-10
Part Number
HS-0308-10
HS-0312-10
HS-0316-10
HS-0320-10
HS-0324-10
HS-0328-10
HS-0332-10
HS-0340-10
HS-0348-10
HS-0364-10
HS-1212-10
HS-1216-10
HS-1220-10
HS-1224-10
HS-1228-10
HS-1232-10
HS-1240-10
HS-1248-10
HS-1256-10
HS-1264-10
5/16"
Width
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
4
7/8"
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4
2"
2
2-1/2
3
3-1/2
4
5
6
Part Number
HS-0408-10
HS-0412-10
HS-0416-10
HS-0420-10
HS-0424-10
HS-0428-10
HS-0432-10
HS-0440-10
HS-0448-10
HS-0464-10
HS-1416-10
HS-1420-10
HS-1424-10
HS-1428-10
HS-1432-10
HS-1440-10
HS-1448-10
HS-1456-10
HS-1464-10
HS-1480-10
2
2-1/2
3
3-1/2
4
5
6
HS-3636-10
HS-3640-10
HS-3648-10
HS-3656-10
HS-3664-10
HS-3680-10
HS-3696-10
3/8"
Width
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
4
1"
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4
5
2-1/4"
HS-3232-10
HS-3240-10
HS-3248-10
HS-3256-10
HS-3264-10
HS-3280-10
HS-3296-10
Part Number
HS-0508-10
HS-0512-10
HS-0516-10
HS-0520-10
HS-0524-10
HS-0528-10
HS-0532-10
HS-0540-10
HS-0548-10
HS-0564-10
HS-1616-10
HS-1620-10
HS-1624-10
HS-1628-10
HS-1632-10
HS-1640-10
HS-1648-10
HS-1656-10
HS-1664-10
HS-1680-10
HS-1696-10
HS-4040-10
HS-4048-10
HS-4056-10
HS-4064-10
HS-4080-10
HS-4096-10
1/2"
Width
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
4
1-1/4"
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4
5
6
2-1/2"
2-1/4
2-1/2
3
3-1/2
4
5
6
Part Number
HS-0608-10
HS-0612-10
HS-0616-10
HS-0620-10
HS-0624-10
HS-0628-10
HS-0632-10
HS-0640-10
HS-0648-10
HS-0664-10
HS-2020-10
HS-2024-10
HS-2028-10
HS-2032-10
HS-2040-10
HS-2048-10
HS-2056-10
HS-2064-10
HS-2080-10
HS-2096-10
Part Number
HS-0808-10
HS-0812-10
HS-0816-10
HS-0820-10
HS-0824-10
HS-0828-10
HS-0832-10
HS-0840-10
HS-0848-10
HS-0864-10
1-1/2"
1-1/4
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4
5
6
HS-2424-10
HS-2428-10
HS-2432-10
HS-2440-10
HS-2448-10
HS-2456-10
HS-2464-10
HS-2480-10
HS-2496-10
3"
2-1/2
3
3-1/2
4
5
6
HS-4848-10
HS-4856-10
HS-4864-10
HS-4880-10
HS-4896-10
3
3-1/2
4
5
6
Wear strip with a thickness of 1/4 in. or less can be shipped coiled in cartons (UPS) or straight in tubes by truck.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
128
Width
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
4
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4
5
6
Drive Rivet
Used to attach wear strips to metal or plastic
frames. Can be used for slotted holes with
washer. Head can be mounted flush with thinner wear strips using standard countersink.
Rivets wear at the same rate as wear strips,
and will not cut into chains. Easily installed
into .257 dia. (F drill), blind or thru hole. Max.
continuous service temperature: 180 F.
Bags of 100.
UHMW
.44
Countersink
82
.25
Part Number
VG-750-10
VG-750-20
VG-750-30
.75
1.0
1.5
.111
.111
.111
.188
.25
.375
.5
.75
1.25
Protects
your Chain
and Belts!
HS series
UHMW-PE
wear strip
VG-750 series
drive rivet
Framework
Hole
sive
Abra ments!
ron
Envi
1/4"
1/2"
5/8"
Part Number
Width
Part Number
Width
Part Number
Width
KS-0416-5
KS-0420-5
KS-0424-5
1
1-1/4
1-1/2
KS-0816-5
KS-0820-5
KS-0824-5
1
1-1/4
1-1/2
KS-1024-5
1-1/2
Arguto-K may be mounted on any flat supporting surface such as angle or channel shapes. Flat head screws or bolts, countersunk below the wear
strip surface, are usually used as fasteners. Arguto-K is completely impregnated with lubricant and can easily operate under wet or dry conditions.
However, for wet applications, it is recommended that strips with a maximum width of 2" be used.
For complete details on Arguto-K specifications, speed and load limits, operating conditions, installation procedures, and additional engineering
information, contact Solus Customer Service at 1-866-765-8744.
129
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
750
90
Chain Guides
and Wear Strips
Bevel
A
VG-710-U18B3 173/16
VG-710-U24B3 233/16
VG-710-U30B3 293/16
Rectangle
VG-710-U18R3 171/8
VG-710-U24R3 231/8
VG-710-U30R3 291/8
VG-710-U24R5 2255/64
VG-710-U30R5 2855/64
VG-710-U18R6 175/16
VG-710-U24R6 235/16
VG-710-U30R6 295/16
A
B
C
18
24
30
1813/16
2413/16
3013/16
1
1
11/2
18
24
30
24
30
18
24
30
187/8
247/8
307/8
259/64
319/64
1811/16
2411/16
3011/16
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
Manufacturer
Recommended Chain
Chain Clearance Width
Used With
Chain#
WidthThickness
/8
3
/8
3
/8
879, 880,
881
/8
/8
3
/8
5
/8
5
/8
3
/4
3
/4
3
/4
879, 880,
881 Tab
882 Tab,
RR 882
1873,1874,
3873, 4873,
4874
Rivet#
1-5/8
1-5/8
1-5/8
K 31/4 VG-750-1
ALL VG-750-1
ALL VG-750-1
1-3/4
1-3/4
1-3/4
2-9/32
2-9/32
1-3/8
1-3/8
1-3/8
K 31/4
ALL
ALL
ALL
ALL
ALL
ALL
VG-750-1
VG-750-1
VG-750-1
VG-750-2
VG-750-2
VG-750-3
VG-750-3
VG-750-3
W
T
Tab
Bevel
A
C
D
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
130
Black UHMW
Nylatron
Nolu-S UHMW
(reduced friction)
Antistatic
UHMW
Wear Strip
Flat wear
surface on top
1234-SERP
Multi-purpose serpentine chain return
profile. Radiused top is ideal for minimal
chain contact and reduced friction. If
full contact is required, simply invert the
profile and use the flat surface.
Chain Guides
and Wear Strips
Orientation
Boss
Rounded wear
surface on top
Material: UHMW.
Orientation
Boss
Part Number
Length (ft.)
VG-1234-SERP-10.5
VG-1234-SERP-21
.75
10.5
21
.50
25100
.25
Material: UHMW.
Part Number
See Related
Products
.95
.78
VG-650-A
VG-650-12
VG-650-58
VG-650PE-A
VG-650PE-12
VG-650PE-58
1.50
3.46
9.58
VG-650-A
Bushing will
accept 1/2 rod
.95
.24
.52
1.50
3.46
3.72
9.58
VG-650-12
.95
.65
9.58
Color/Material Bushing
black/PA
black/PA
black/PA
gray/PE
gray/PE
gray/PE
None
1/2
5/8
None
1/2
5/8
Bushing will
accept 5/8 rod
.24
21
100
1.0
.19
650
.24
Length (ft.)
VG-PCR-25100-21
VG-PCR-25100-100
1.50
3.46
3.72
VG-650-58
131
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
Pushers
Pallet, box,
carton etc.
5/16"
carriage bolt
VG-P813
VG-370WS
VG-P374
370
5/16"
Carriage
Bolt
cL
1.44
.72
.34
.27
.40
cL
1.0
.063
1.37
VG-370-40-8
VG-370-50-8
VG-370-60-8
VG-370-40-10
VG-370-50-10
VG-370-60-10
VG-370-40-12
VG-370-50-12
VG-370-60-12
VG-370-40-20
VG-370-50-20
VG-370-60-20
Centroid
ly
Chain#
1.28
1.25
1.19
40
50
60
ly = .197 in4
lx = .095 in4
E = 1 x 107 psi
Weight = .74 lb/ft
.72
lx
VG-P813 cover
not included.
See page 256 for
additional selections.
.43
5/16"
Carriage Bolt
.063
.72
1.44
.34
cL
1.0
.27
.40
5/16"
Carriage
Bolt
A
1.37
.84
VG-370WS-40-8
VG-370WS-50-8
VG-370WS-60-8
VG-370WS-40-10
VG-370WS-50-10
VG-370WS-60-10
VG-370WS-40-12
VG-370WS-50-12
VG-370WS-60-12
VG-370WS-40-20 1.28 40
VG-370WS-50-20 1.25 50
VG-370WS-60-20 1.19 60
A Chain#
1.25
340-80
1.44
1.69
.34
370WS
Assembly includes aluminum extrusion and wear strips. These units can be
configured to accept #80 ANSI roller chains.
Material: Guide: aluminum. Insert: green UHMW.
.27
.40
VG-340-80-8
VG-340-80-10
VG-340-80-12
VG-340-80-20
1.63
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
132
Chain#
80
340-PC
cL
1.34
1.69
1.25
VG-340-PC-60-8
VG-340-PC-60-10
Chain#
.12
.27
.40
60
1.62
360
cL
.06
1.69
VG-360-40-8
VG-360-50-8
VG-360-60-8
VG-360-40-10
VG-360-50-10
VG-360-60-10
VG-360-40-12
VG-360-50-12
VG-360-60-12
VG-360-40-20
VG-360-50-20
VG-360-60-20
.91
Chain#
.86
.83
.77
.28 .19
40
50
60
380
cL
VG-P813 cover
not included.
See page 256 for
additional selections.
1.87
VG-380-40-8
VG-380-50-8
VG-380-60-8
VG-380-40-10
VG-380-50-10
VG-380-60-10
VG-380-40-12
VG-380-50-12
VG-380-60-12
VG-380-40-20
VG-380-50-20
VG-380-60-20
Chain#
.84
.81
.75
40
50
60
.38 .25
5/16" Hex
Head Bolt
.06
.51
.94
P300 series
UHMW Inserts
.35
.29
.47
.60
.46
Part Number
Part Number
Part Number
Part Number
VG-P374-8
VG-P374-10
VG-P374-12
VG-P374-20
VG-P375-8
VG-P375-10
VG-P375-12
VG-P375-20
VG-P376-8
VG-P376-10
VG-P376-12
VG-P376-20
VG-P379-8
VG-P379-10
VG-P379-12
VG-P379-20
VG-P378-8
VG-P378-10
133
Length (ft.)
8
10
12
20
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chain Guides
and Wear Strips
Chain Guides
and Wear Strips
#40
.09
Chain Guide
Stainless
VG-SSCG-#40-8
VG-SSCG-#40-10
VG-SSCG-#40-12
VG-SSCG-#40-20
#40
.67
VG-GSCG-#40-8
VG-GSCG-#40-10
VG-GSCG-#40-12
VG-GSCG-#40-20
.09
Extended Chain
Guide
.67
Galvanized
.47
.40
.28
.28
.67
Stainless
#50
.13
VG-SSECG-#40-8
VG-SSECG-#40-10
VG-SSECG-#40-12
VG-SSECG-#40-20
.34
Chain Guide
.67
1.45
8
10
12
20
Galvanized
VG-GSECG-#40-8
VG-GSECG-#40-10
VG-GSECG-#40-12
VG-GSECG-#40-20
Length (ft.)
8
10
12
20
.34
.67
VG-GSCG-#50-8
VG-GSCG-#50-10
VG-GSCG-#50-12
VG-GSCG-#50-20
#50
8
10
12
20
.13
Extended Chain
Guide
1.45
#60
VG-SSECG-#50-8
VG-SSECG-#50-10
VG-SSECG-#50-12
VG-SSECG-#50-20
.46
Chain Guide
Wear strip and guide for #60
ANSI single roller chains. Can
also be used as side rail or
wear strip when a wider surface contact is required.
VG-SSF-8
VG-SSF-10
VG-SSF-12
VG-SSF-20
.67
VG-GSECG-#50-8
VG-GSECG-#50-10
VG-GSECG-#50-12
VG-GSECG-#50-20
8
10
12
20
.47
.67
#60
VG-GSF-8
VG-GSF-10
VG-GSF-12
VG-GSF-20
8
10
12
20
Extended Chain
Guide
1.45
#80
.61
Chain Guide
VG-SSECG-#60-8
VG-SSECG-#60-10
VG-SSECG-#60-12
VG-SSECG-#60-20
.81
VG-GSECG-#60-8
VG-GSECG-#60-10
VG-GSECG-#60-12
VG-GSECG-#60-20
8
10
12
20
*4, 5 and 6 ft. lengths are also available. Other lengths can be cut to order.
.67
VG-SSCG-#80-8
VG-SSCG-#80-10
VG-SSCG-#80-12
VG-SSCG-#80-20
VG-GSCG-#80-8
VG-GSCG-#80-10
VG-GSCG-#80-12
VG-GSCG-#80-20
8
10
12
20
*4, 5 and 6 ft. lengths are also available. Other lengths can be cut to order.
#40
#50
#60
#80
#40
#50
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
#60
134
Important Note:
When Valu Guide Rail is used as a wear strip, the UHMW insert
should be fastened to the metal sheath at the leading end of the
rail. Using a sheet metal screw through the back of the sheath
or a heavy wire pin from the side should be adequate. This will
prevent the insert from sliding within the sheath in the event the
chain accidentally catches on a leading edge. This also allows
for thermal expansion and contraction of the UHMW insert.
Standard plastic tracks are primarily used to guide and support ANSI double pitch chain
in packaging and drag chain conveying systems. Experience has shown that the best way to distribute the load and
increase capacity is to support these chains on a flat edge of the side plates. These UHMW based products provide
low friction surfaces with outstanding wear resistance when the load is distributed in this manner.
Chain Guides
and Wear Strips
Chamfer
Straight
HA
HB
W
S
H
W
S
H
1/8"x45
UHMW
Nolu-S
Nylatron
UHMW
w/ Chamfer
Nolu-S
w/ Chamfer
Nylatron
w/ Chamfer
Chain
Size
Length
(ft.)
HA-2040-5
HA-2040-10
HA-2050-5
HA-2050-10
HA-2060-5
HA-2060-10
HA-2080-5
HA-2080-10
HA-2100-5
HA-2100-10
HA-2120-5
HA-2120-10
SA-2040-5
SA-2040-10
SA-2050-5
SA-2050-10
SA-2060-5
SA-2060-10
SA-2080-5
SA-2080-10
SA-2100-5
SA-2100-10
SA-2120-5
SA-2120-10
NA-2040-5
NA-2040-10
NA-2050-5
NA-2050-10
NA-2060-5
NA-2060-10
NA-2080-5
NA-2080-10
NA-2100-5
NA-2100-10
NA-2120-5
NA-2120-10
HB-2040-5
HB-2040-10
HB-2050-5
HB-2050-10
HB-2060-5
HB-2060-10
HB-2080-5
HB-2080-10
HB-2100-5
HB-2100-10
HB-2120-5
HB-2120-10
SB-2040-5
SB-2040-10
SB-2050-5
SB-2050-10
SB-2060-5
SB-2060-10
SB-2080-5
SB-2080-10
SB-2100-5
SB-2100-10
SB-2120-5
SB-2120-10
NB-2040-5
NB-2040-10
NB-2050-5
NB-2050-10
NB-2060-5
NB-2060-10
NB-2080-5
NB-2080-10
NB-2100-5
NB-2100-10
NB-2120-5
NB-2120-10
5/16
5/16
3/8
3/8
3/8
3/8
1/2
1/2
5/8
5/8
5/8
5/8
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
2
2
2-1/4
2-1/4
2-3/4
2-3/4
1/8
1/8
5/32
5/32
3/16
3/16
1/4
1/4
5/16
5/16
3/8
3/8
7/8
7/8
1
1
1-1/4
1-1/4
1-9/16
1-9/16
1-7/8
1-7/8
2-1/4
2-1/4
40
40
50
50
60
60
80
80
100
100
120
120
5
10
5
10
5
10
5
10
5
10
5
10
HC
HD
W
S
H
W
S
H
UHMW
Nolu-S
Nylatron
UHMW
w/ Chamfer
HC-2040-5
HC-2040-10
HC-2050-5
HC-2050-10
HC-2060-5
HC-2060-10
HC-2080-5
HC-2080-10
HC-2100-5
HC-2100-10
HC-2120-5
HC-2120-10
SC-2040-5
SC-2040-10
SC-2050-5
SC-2050-10
SC-2060-5
SC-2060-10
SC-2080-5
SC-2080-10
SC-2100-5
SC-2100-10
SC-2120-5
SC-2120-10
NC-2040-5
NC-2040-10
NC-2050-5
NC-2050-10
NC-2060-5
NC-2060-10
NC-2080-5
NC-2080-10
NC-2100-5
NC-2100-10
NC-2120-5
NC-2120-10
HD-2040-5
HD-2040-10
HD-2050-5
HD-2050-10
HD-2060-5
HD-2060-10
HD-2080-5
HD-2080-10
HD-2100-5
HD-2100-10
HD-2120-5
HD-2120-10
HE
W
Y
Nolu-S
w/ Chamfer
Nylatron
w/ Chamfer
Chain
Size
Length
(ft.)
SD-2040-5
SD-2040-10
SD-2050-5
SD-2050-10
SD-2060-5
SD-2060-10
SD-2080-5
SD-2080-10
SD-2100-5
SD-2100-10
SD-2120-5
SD-2120-10
ND-2040-5
ND-2040-10
ND-2050-5
ND-2050-10
ND-2060-5
ND-2060-10
ND-2080-5
ND-2080-10
ND-2100-5
ND-2100-10
ND-2120-5
ND-2120-10
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1
1
1-1/4
1-1/4
1-1/2
1-1/2
2
2
2-1/4
2-1/4
3
3
1/4
1/4
9/32
9/32
5/16
5/16
3/8
3/8
7/16
7/16
9/16
9/16
3/4
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-13/16
1-13/16
2-1/4
2-1/4
40
40
50
50
60
60
80
80
100
100
120
120
5
10
5
10
5
10
5
10
5
10
5
10
HF
W
Y
1/8"x45
UHMW
Nolu-S
Nylatron
UHMW
w/ Chamfer
HE-2040-5
HE-2040-10
HE-2050-5
HE-2050-10
HE-2060-5
HE-2060-10
HE-2080-5
HE-2080-10
HE-2100-5
HE-2100-10
HE-2120-5
HE-2120-10
SE-2040-5
SE-2040-10
SE-2050-5
SE-2050-10
SE-2060-5
SE-2060-10
SE-2080-5
SE-2080-10
SE-2100-5
SE-2100-10
SE-2120-5
SE-2120-10
NE-2040-5
NE-2040-10
NE-2050-5
NE-2050-10
NE-2060-5
NE-2060-10
NE-2080-5
NE-2080-10
NE-2100-5
NE-2100-10
NE-2120-5
NE-2120-10
HF-2040-5
HF-2040-10
HF-2050-5
HF-2050-10
HF-2060-5
HF-2060-10
HF-2080-5
HF-2080-10
HF-2100-5
HF-2100-10
HF-2120-5
HF-2120-10
SF-2040-5
SF-2040-10
SF-2050-5
SF-2050-10
SF-2060-5
SF-2060-10
SF-2080-5
SF-2080-10
SF-2100-5
SF-2100-10
SF-2120-5
SF-2120-10
NF-2040-5
NF-2040-10
NF-2050-5
NF-2050-10
NF-2060-5
NF-2060-10
NF-2080-5
NF-2080-10
NF-2100-5
NF-2100-10
NF-2120-5
NF-2120-10
UHMW
Nolu-S
Nylatron
HG-2040-5
HG-2040-10
HG-2050-5
HG-2050-10
HG-2060-5
HG-2060-10
HG-2080-5
HG-2080-10
SG-2040-5
SG-2040-10
SG-2050-5
SG-2050-10
SG-2060-5
SG-2060-10
SG-2080-5
SG-2080-10
135
NG-2040-5
NG-2040-10
NG-2050-5
NG-2050-10
NG-2060-5
NG-2060-10
NG-2080-5
NG-2080-10
HG
W
S
Y
P
Nolu-S
w/ Chamfer
Nylatron
w/ Chamfer
Chain
Size
Length
(ft.)
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
1/2
1/2
1/2
1/2
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
2
2
2-1/4
2-1/4
.08
.08
.10
.10
.115
.115
.13
.13
.21
.21
.26
.26
1/4
1/4
5/16
5/16
7/16
7/16
9/16
9/16
11/16
11/16
15/16
15/16
40
40
50
50
60
60
80
80
100
100
120
120
10
10
10
10
10
10
10
10
10
10
10
10
5/16
5/16
3/8
3/8
1/2
1/2
1/2
1/2
1
1
1-1/4
1-1/4
1-1/2
1-1/2
2
2
Chain Length
Size
(ft.)
40
40
50
50
60
60
80
80
5
10
5
10
5
10
5
10
Cable Pulleys
3/8" Cable
Chain Guides
and Wear Strips
HGCP
1.28
HGCP series
pulleys include
metal sleeve
bushing.
Plastic stand-off
part #STF-1006
(sold separately)
is for use with
HGCP-1006 pulley
or VG-CSB-SS-38
sintered bushing.
Bolt
HGCP-1004
HGCP-1005
HGCP-1006
1/4
5/16
3/8
.62
CS
3.0
Part Number
VG-CS-3.0
for 1/2
O.D. bushing
CSFB
snap ring
.69
.49
.80
Machined
Bushing
.75
Part Number
Bolt
VG-CSFB-SS-14
1/4
1.0
snap ring
CSB
VG-CSFB-SS-14
machined sleeve
bushing with snap ring.
Required 1/4" bolt.
STF
Sintered Bushing
Flanged Spacer
Bolt
1/4
3/8
.50
3/4
.68
Material: Polypropylene.
Part Number
Bolt
Part Number
Bolt
VG-CSB-SS-14
VG-CSB-SS-516
VG-CSB-SS-38
1/4
5/16
3/8
STF-1006
1/4
VG-A500 with
VG-P2007
(standard duty)
OR
VG-A1000 with
VG-P2007
(heavy duty)
or
VG-A1000
with VG-P1012
HGCP-1006
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
136
1/2" Cable
3.0
Chain Guides
and Wear Strips
Made from a special grade of UHMW polymer to produce a tough, abrasion resistant, low
friction pulley that provides long corrosion free service with a significant reduction in noise levels.
A stainless steel powdered metal sleeve to form an axle after assembly is supplied. Pulleys can
also be designed to your specifications by contacting our engineering department.
3.0
A-size V-belt
Part Number
Bolt
HGCP-12-1004
HGCP-12-1005
HGCP-12-1006
HGCP-AV-1004
HGCP-AV-1005
HGCP-AV-1006
1/4
5/16
3/8
.62
.62
Stainless
VBG-.61
.19
.83
V-Belt Guide
Wear strip and guide for "A"
section Vee belts.
Steel Sheath
Galvanized
Length (ft.)
VG-SSVBG-.61A-8
VG-SSVBG-.61A-10
VG-SSVBG-.61A-12
VG-SSVBG-.61A-20
VG-GSVBG-.61A-8
VG-GSVBG-.61A-10
VG-GSVBG-.61A-12
VG-GSVBG-.61A-20
8
10
12
20
VG-SSVBG-.75B-8
VG-SSVBG-.75B-10
VG-SSVBG-.75B-12
VG-SSVBG-.75B-20
VG-GSVBG-.75B-8
VG-GSVBG-.75B-10
VG-GSVBG-.75B-12
VG-GSVBG-.75B-20
8
10
12
20
VG-SSCT-8
VG-SSCT-10
VG-SSCT-12
VG-SSCT-20
VG-GSCT-8
VG-GSCT-10
VG-GSCT-12
VG-GSCT-20
8
10
12
20
VG-SSRBG-8
VG-SSRBG-10
VG-SSRBG-12
VG-SSRBG-20
VG-GSRBG-8
VG-GSRBG-10
VG-GSRBG-12
VG-GSRBG-20
8
10
12
20
.67
.73
VBG-.75
.22
V-Belt Guide
.83
CT
.73
.46
Cable Track
.28
.83
.67
RBG
4mm Radius
.12
Cable Track
.63
.67
*4, 5 and 6 ft. lengths are also available. Other lengths can be
cut to order.
Important Note:
When Valu Guide Rail is used as a
wear strip, the UHMW insert should
be fastened to the metal sheath at
the leading end of the rail. Using
a sheet metal screw through the
back of the sheath or a heavy wire
pin from the side should be adequate. This will prevent the insert
from sliding within the sheath in the event the chain accidentally
catches on a leading edge. This also allows for thermal expansion and contraction of the UHMW insert.
V-Belt Guide
137
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Cable Guides
VG-P1012
VG-P1012
Chain Guides
and Wear Strips
Cable Guides
The following aluminum extrusions can be used with the UHMW insert listed
in this group. These rails are commonly used as cable guides for conveying.
Part number VG-A500 fastens with a 5/16 hex head bolt, and part number
VG-A1000 fastens with a 3/8 carriage bolt (bolts not included).
VG-A500
VG-A1000
.75
.44
3/4
25/32
.62
.25
.72
Material: Aluminum.
.81
1.25
Material: UHMW.
Length(ft.)
VG-A500-10
VG-A500-20
VG-A1000-10
VG-A1000-20
Length(ft.)
10
20
.94
VG-P1012-10
VG-P1012-20
10
20
VG-P710
.44
.82
.69
Material: Aluminum.
Material: UHMW.
VG-A1315
.81
Length(ft.)
VG-A1315-10
VG-A1315-20
Length(ft.)
10
20
VG-P710-10
VG-P710-20
10
20
VG-P613
1.0
VG-A1615
.82
.94
.44
.69
.81
VG-A500 with
VG-P2007
(standard duty)
Length(ft.)
VG-A1615-10
VG-A1615-20
VG-P613-10
VG-P613-20
10
20
OR
VG-A1000 with
VG-P2007
(heavy duty)
VG-A1000
with VG-P1012
HGCP-1006
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
138
Mounted Bearings
& Accessories
Mounting bolt
torque (by hole size):
.43 - 430 in/lbs
.55 - 520 in/lbs
Set screw torque:
1/4 - 35 in/lbs
5/8 - 80 in/lbs
Max. misalignment
between shaft and
housing: 2
Continuous
operating temp.:
0 to +195 F
Section Overview
Flange Bearings with
Solid Housings Page
2, 3, & 4 Hole Bearing Housings
Black Bearing Housings
Antimicrobial Bearing Housings
Pillow Block Bearings
Tapped Bearing Housings
Ribbed Flange Bearings
Chrome Steel Inserts
Stainless Steel Inserts
Through Shaft Covers
Closed Covers
140
LifeGard Page
166
171
174
UCFQ
Mounted Bearings
and Accessories
Flange Bearing
with Solid Housings
Chrome Steel
Stainless Steel
OR
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
UCFQ-204L-12
3/4"
3.39
1/4
0.61
1.89
1.97 1.02
2210
1480
2250
0.48
50013
50013.APE
UCFQ-205L-16
1"
3.74
1/4
0.67
2.05
2.13 1.14
2430
1770
2430
0.70
50009
50009.APE
UCFQ-206L-20
1-1/4"
4.25
1/4
0.57
2.20
2.28 1.14
3370
2540
2590
1.06
50010
50010.APE
UCFQ-207L-23
1-7/16" 4.65
1/4
0.71
2.36
2.44 1.30
4430
3440
2700
1.39
50010
50010.APE
UCFQ-208L-24
1-1/2"
5.12
2.28
2.36 1.38
5040
4020
2810
1.76
50014
50014.APE
Part Number
D G (UNF) H
3/4"
3.39
1/4
0.61
1.89
1.97 1.02
1640
1100
2250
0.48
50013
50013.APE
UCFQSS-205L-16
1"
3.74
1/4
0.67
2.05
2.13 1.14
1820
1300
2430
0.70
50009
50009.APE
UCFQSS-206L-20
1-1/4"
4.25
1/4
0.57
2.20
2.28 1.14
2530
1890
2590
1.06
50010
50010.APE
UCFQSS-207L-23
1-7/16" 4.65
1/4
0.71
2.36
2.44 1.30
3300
2560
2700
1.39
50010
50010.APE
UCFQSS-208L-24
1-1/2"
2.28
2.36 1.38
3780
3010
2810
1.76
50014
50014.APE
5.12
For
P
CCs!
A
H ed
Ne
Stainless Steel
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
UCFQSS-204-12-N
3/4"
3.39
1/4
0.61
1.89
1.97 1.02
1640 1100
2250
0.48
50007-N 50007.APE-N
UCFQSS-205-16-N
1"
3.74
1/4
0.67
2.05
2.13 1.14
1820 1300
2430
0.70
50011-N 50011.APE-N
UCFQSS-206-20-N
1-1/4"
4.25
1/4
0.57
2.20
2.28 1.14
2530 1890
2590
1.06
50001-N 50001.APE-N
UCFQSS-207-23-N
1-7/16" 4.65
1/4
0.71
2.36
2.44 1.30
3300 2560
2700
1.39
50004-N 50004.APE-N
UCFQSS-208-24-N
1-1/2"
2.28
2.36 1.38
3780 3010
2810
1.76
50002-N 50002.APE-N
Part Number
5.12
D G (UNF) H
For the full range of bearings, see the System Plast Bearing Line catalog.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
140
UCFQ sealed
Capped and Sealed Flange
Bearing with Solid Housing
N
Closed version
with set screws
Chrome Steel
Chrome Steel
Closed Cap
OR
Mounted Bearings
and Accessories
Stainless Steel
Materials: Black polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
Yellow polypropylene safety cap. Seal and O-ring is NBR rubber.
Load Ratings (lbf)
ship
Insert
dynamic static max radial weight
Through Shaft Cap
A
B
C
D G (UNF) H
J
M
N
T
U
V
Z
C
Co on housing (lbs)
UCFQ-C204L-12
UCFQ-T204L-12
3/4"
3.39
2.50
0.43
1.12
1/4
0.61
0.39
0.72
0.30 1.33
1.89
1.97 1.02
2210
1480
2250
UCFQ-C205L-16
UCFQ-T205L-16
1"
3.74
2.76
0.43
1.34
1/4
0.67
0.48
0.78
0.30 1.45
2.05
2.13 1.14
2430
1770
2430
0.75
UCFQ-C206L-20
UCFQ-T206L-20
1-1/4"
4.25
3.25
0.43
1.57
1/4
0.57
0.48
0.87
0.35 1.44
2.20
2.28 1.14
3370
2540
2590
1.10
UCFQ-C207L-23
UCFQ-T207L-23
1-7/16" 4.65
3.62
0.55
1.84
1/4
0.71
0.62
1.00
0.38 1.71
2.36
2.44 1.30
4430
3440
2700
1.43
UCFQ-C208L-24
UCFQ-T208L-24
1-1/2"
4.00
0.55
2.07 5/16
0.71
0.62
1.19
0.43 1.89
2.28
2.36 1.38
5040
4020
2810
1.81
5.12
0.51
UCFQSS-T204L-12
3/4"
3.39
2.50
0.43
1.12
1/4
0.61
0.39
0.72
0.30 1.33
1.89
1.97 1.02
2210
1480
2250
0.51
UCFQSS-C205L-16
UCFQSS-T205L-16
1"
3.74
2.76
0.43
1.34
1/4
0.67
0.48
0.78
0.30 1.45
2.05
2.13 1.14
2430
1770
2430
0.75
UCFQSS-C206L-20
UCFQSS-T206L-20
1-1/4"
4.25
3.25
0.43
1.57
1/4
0.57
0.48
0.87
0.35 1.44
2.20
2.28 1.14
3370
2540
2590
1.10
UCFQSS-C207L-23
3.62
0.55
1.84
1/4
0.71
0.62
1.00
0.38 1.71
2.36
2.44 1.30
4430
3440
2700
1.43
UCFQSS-C208L-24
UCFQSS-T208L-24
4.00
0.55
2.07 5/16
0.71
0.62
1.19
0.43 1.89
2.28
2.36 1.38
5040
4020
2810
1.81
1-1/2"
5.12
For
Stainless Steel
P
CCs!
A
H ed
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
White polypropylene safety cap. Seal and O-ring is NBR rubber.
UCFQSS-C204-12-N
UCFQSS-T204-12-N
3/4"
3.39
2.50
0.43 1.12
1/4
0.61 0.39
2210
1480
2250
0.51
UCFQSS-C205-16-N
UCFQSS-T205-16-N
1"
3.74
2.76
0.43 1.34
1/4
0.67 0.48
2430
1770
2430
0.75
UCFQSS-C206-20-N
UCFQSS-T206-20-N
1-1/4"
4.25
3.25
0.43 1.57
1/4
0.57 0.48
3370
2540
2590
1.10
UCFQSS-C207-23-N
UCFQSS-T207-23-N
1-7/16" 4.65
3.62
0.55 1.84
1/4
0.71 0.62
4430
3440
2700
1.43
UCFQSS-C208-24-N
UCFQSS-T208-24-N
1-1/2"
4.00
5040
4020
2810
1.81
5.12
G (UNF) H
For the full range of bearings, see the System Plast Bearing Line catalog.
141
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
UCFH
Mounted Bearings
and Accessories
Flange Bearing
with Solid Housings
N M
Chrome Steel
OR
Stainless Steel
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
UCFH-204L-12
3/4"
4.49
3.54
2210
1480
1690
0.44
50013
50013.APE
UCFH-205L-16
1"
5.12
3.90
2430
1770
1800
0.66
50009
50009.APE
UCFH-206L-20
1-1/4" 5.83
4.61
3370
2540
1980
0.99
50010
50010.APE
UCFH-207L-23
1-7/16" 6.42
5.12
4430
3440
2020
1.32
50010
50010.APE
UCFH-208L-24
1-1/2" 6.89
5.67
0.55 2.07 4.06 5/16 0.71 0.79 1.18 0.43 1.89 2.28 2.36 1.38
5040
4020
2810
1.76
50014
50014.APE
Part Number
F G (UNF) H
3/4"
4.49
3.54
1640
1100
1690
0.44
50013
50013.APE
UCFHSS-205L-16
1"
5.12
3.90
1820
1300
1800
0.66
50009
50009.APE
UCFHSS-206L-20
1-1/4" 5.83
4.61
2530
1890
1980
0.99
50010
50010.APE
UCFHSS-207L-23
1-7/16" 6.42
5.12
3300
2560
2020
1.32
50010
50010.APE
UCFHSS-208L-24
1-1/2" 6.89
5.67
0.55 2.07 4.06 5/16 0.71 0.79 1.18 0.43 1.89 2.28 2.36 1.38
3780
3010
2810
1.76
50014
50014.APE
For
P
CCs!
A
H ed
Ne
Stainless Steel
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
F G (UNF) H
UCFHSS-204-12-N
3/4"
0.44
50007-N 50007.APE-N
UCFHSS-205-16-N
1"
0.66
50011-N 50011.APE-N
UCFHSS-206-20-N
0.99
50001-N 50001.APE-N
UCFHSS-207-23-N
1.32
50004-N 50004.APE-N
UCFHSS-208-24-N
1-1/2" 6.89 5.67 0.55 2.07 4.06 5/16 0.71 0.79 1.18 0.43 1.89 2.28 2.36 1.38
1.76
50002-N 50002.APE-N
For the full range of bearings, see the System Plast Bearing Line catalog.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
142
UCFH sealed
Capped and Sealed Flange
Bearing with Solid Housings
N M
Closed version
with set screws
Chrome Steel
OR
Mounted Bearings
and Accessories
Stainless Steel
Materials: Black polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
Yellow polypropylene safety cap. Seal and O-Ring is NBR rubber.
F G (UNF) H
Closed Cap
UCFH-C204L-12
UCFH-T204L-12
3/4"
4.49
3.54
0.43
1.12 2.52
1/4
0.61 0.39
0.72
0.30 1.33
1.89
1.97 1.02
2210
1480
1690
UCFH-C205L-16
UCFH-T205L-16
1"
5.12
3.90
0.43
1.34 2.76
1/4
0.67 0.49
0.78
0.30 1.45
2.05
2.13 1.14
2430
1770
1800
0.70
UCFH-C206L-20
UCFH-T206L-20
1-1/4" 5.83
4.61
0.43
1.57 3.31
1/4
0.57 0.49
0.87
0.35 1.44
2.20
2.28 1.14
3370
2540
1980
1.03
UCFH-C207L-23
UCFH-T207L-23
1-7/16" 6.42
5.12
0.55
1.84 3.54
1/4
0.71 0.63
1.00
0.38 1.71
2.36
2.44 1.30
4430
3440
2020
1.36
UCFH-C208L-24
UCFH-T208L-24
1-1/2" 6.89
5.67
0.55
1.18
0.43 1.89
2.28
2.36 1.38
5040
4020
2810
1.81
0.46
0.46
3/4"
4.49
3.54
0.43
1.12 2.52
1/4
0.61 0.39
0.72
0.30 1.33
1.89
1.97 1.02
1640
1100
1690
UCFHSS-C205L-16 UCFHSS-T205L-16
1"
5.12
3.90
0.43
1.34 2.76
1/4
0.67 0.49
0.78
0.30 1.45
2.05
2.13 1.14
1820
1300
1800
0.70
1-1/4" 5.83
4.61
0.43
1.57 3.31
1/4
0.57 0.49
0.87
0.35 1.44
2.20
2.28 1.14
2530
1890
1980
1.03
1/4
UCFHSS-C206L-20 UCFHSS-T206L-20
5.12
0.55
1.84 3.54
0.71 0.63
1.00
0.38 1.71
2.36
2.44 1.30
3300
2560
2020
1.36
UCFHSS-C208L-24 UCFHSS-T208L-24
5.67
0.55
1.18
0.43 1.89
2.28
2.36 1.38
3780
3010
2810
1.81
1-1/2" 6.89
Stainless Steel
For
P
CCs!
A
H ed
Stainless Steel
Closed Cap
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
White polypropylene safety cap. Seal and O-ring is NBR rubber.
Load Ratings (lbf)
ship
Insert
dynamic static max radial weight
A
B
C
D
F G (UNF) H
J M
N T
U
V Z
C
Co on housing (lbs)
Through Shaft Cap
UCFHSS-C204-12-N
UCFHSS-T204-12-N
3/4"
4.49
3.54
1640
1100
1690
0.46
UCFHSS-C205-16-N
UCFHSS-T205-16-N
1"
5.12
3.90
1820
1300
1800
0.70
UCFHSS-C206-20-N
UCFHSS-T206-20-N
1-1/4" 5.83
4.61
2530
1890
1980
1.03
UCFHSS-C207-23-N
UCFHSS-T207-23-N
1-7/16" 6.42
5.12
3300
2560
2020
1.36
UCFHSS-C208-24-N
UCFHSS-T208-24-N
1-1/2" 6.89
5.67
0.55 2.07 4.06 5/16 0.71 0.79 1.18 0.43 1.89 2.28 2.36 1.38
3780
3010
2810
1.81
For the full range of bearings, see the System Plast Bearing Line catalog.
143
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
T
Z
U
G
UCFA
Mounted Bearings
and Accessories
Flange Bearing
with Solid Housings
Chrome Steel
F
7/16
OR
Stainless Steel
F G (UNF) H
UCFA-205L-12
3/4" 4.92 1.62 1.81 1.12 1.12 1/4 0.67 0.49 2.71 0.72 0.30 1.39 1.95 2.30 1.08
2210 1480
2140
0.77
50013
50013.APE
UCFA-205L-16
1" 4.92 1.62 1.81 1.34 1.12 1/4 0.63 0.49 2.71 0.78 0.30 1.41 2.06 2.30 1.08
2430 1770
2023
0.88
50009
50009.APE
UCFA-206L-16
1" 5.53 1.87 2.06 1.34 1.25 1/4 0.71 0.49 3.31 0.78 0.30 1.49 2.22 2.30 1.16
2430 1770
2470
0.99
50010
50010.APE
UCFA-206L-20
1-1/4" 5.53 1.87 2.06 1.57 1.25 1/4 0.67 0.49 3.31 0.87 0.35 1.54 2.22 2.14 1.16
3370 2540
2470
1.08
50010
50010.APE
3/4" 4.92 1.62 1.81 1.31 1.12 1/4 0.67 0.49 2.71 0.92 0.30 1.59 1.95 2.02 1.08
2210 1486
2140
0.77
50013
50013.APE
UCFASS-205L-16
1" 4.92 1.62 1.81 1.50 1.16 1/4 0.63 0.49 2.71 0.92 0.30 1.55 2.06 2.14 1.08
2430 1770
2023
0.88
50009
50009.APE
UCFASS-206L-16
1" 5.53 1.87 2.06 1.34 1.25 1/4 0.71 0.49 3.31 0.78 0.30 1.49 2.22 2.30 1.16
2430 1770
2470
0.99
50010
50010.APE
UCFASS-206L-20
1-1/4" 5.53 1.87 2.06 1.57 1.25 1/4 0.67 0.49 3.31 0.87 0.35 1.54 2.22 2.30 1.16
2530 1890
2470
1.08
50010
50010.APE
For
P
CCs!
A
H ed
Ne
Stainless Steel
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
F G (UNF) H
3/4" 4.92 1.62 1.81 1.31 1.12 1/4 0.67 0.49 2.71 0.92 0.30 1.59 1.95 2.02 1.08
2140
0.77
50013-N 50013.APE-N
UCFASS-205L-16-N
1"
4.92 1.62 1.81 1.50 1.16 1/4 0.63 0.49 2.71 0.92 0.30 1.55 2.06 2.14 1.08
2430 1770
2023
0.88
50009-N 50009.APE-N
UCFASS-206L-16-N
1"
5.53 1.87 2.06 1.34 1.25 1/4 0.71 0.49 3.31 0.78 0.30 1.49 2.22 2.30 1.16
2430 1770
2470
0.99
50010-N 50010.APE-N
UCFASS-206L-20-N 1-1/4" 5.53 1.87 2.06 1.57 1.25 1/4 0.67 0.49 3.31 0.87 0.35 1.54 2.22 2.30 1.16
2530 1890
2470
1.08
50010-N 50010.APE-N
For the full range of bearings, see the System Plast Bearing Line catalog.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
144
UCFA sealed
Capped and Sealed Flange
Bearing with Solid Housings
T
Z
Mounted Bearings
and Accessories
F
7/16
B
H
Closed version
with set screws
Chrome Steel
UCFA-C205L-12
UCFA-T205L-12
UCFA-C205L-16
UCFA-T205L-16
UCFA-C206L-16
UCFA-T206L-16
UCFA-C206L-20
UCFA-T206L-20
OR
Stainless Steel
Materials: Black polyamide support housing (polypropylene can be special ordered). Stainless steel bearing
insert. Yellow polypropylene safety cap. Seal and O-Ring is NBR rubber.
Load Ratings (lbf)
ship
dynamic static max radial weight
B
C
D
F G (UNF) H
J
L
M
N T
U
V Z
C
Co on housing (lbs)
1/4 0.67 0.49 2.71 0.72 0.30 1.39 1.95 2.14 1.08
2210
1480
2140
0.87
1/4 0.63 0.49 2.71 0.78 0.30 1.41 2.06 2.14 1.08
2430
1770
2023
0.98
1"
4.92 1.62
1"
5.53 1.87
1/4 0.71 0.49 3.31 0.78 0.30 1.49 2.22 2.30 1.16
2430
1770
2470
1.09
1/4 0.67 0.49 3.31 0.87 0.35 1.54 2.22 2.30 1.16
3370
2540
2470
1.18
1/4 0.67 0.49 2.71 0.72 0.30 1.39 1.95 2.14 1.08
2210
1486
2140
0.87
1/4 0.63 0.49 2.71 0.78 0.30 1.41 2.06 2.14 1.08
2430
1770
2023
0.98
1770
2470
1.09
1890
2470
1.18
UCFASS-C205L-16 UCFASS-T205L-16
1"
4.92 1.62
UCFASS-C206L-16 UCFASS-T206L-16
1"
5.53 1.87
1/4 0.71 0.49 3.31 0.78 0.30 1.49 2.22 2.30 1.16
2430
1/4 0.67 0.49 3.31 0.87 0.35 1.54 2.22 2.30 1.16
2530
Stainless Steel
A new antimicrobial material for improved hygiene. Created
through new technology which will help equipment builders
meet the requirements of the USDA and other government
agencies as they relate to the prevention of contamination of
food products and the growth of bacteria.
For
P
CCs!
A
H ed
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered).
Stainless steel bearing insert. White polypropylene safety cap. Seal and O-Ring is NBR rubber.
Load Ratings (lbf)
ship
dynamic static max radial weight
A
B
C
D
F G (UNF) H
J
L
M N
T U
V Z
C
Co on housing (lbs)
UCFASS-C205L-12-N UCFASS-T205L-12-N
3/4"
4.92 1.62 1.81 1.12 1.12 1/4 0.67 0.49 2.71 0.72 0.30 1.39 1.95 2.14 1.08
2210
1486
2140
0.87
UCFASS-C205L-16-N UCFASS-T205L-16-N
1"
4.92 1.62 1.81 1.34 1.12 1/4 0.63 0.49 2.71 0.78 0.30 1.41 2.06 2.14 1.08
2430
1770
2023
0.98
UCFASS-C206L-16-N UCFASS-T206L-16-N
1"
5.53 1.87 2.06 1.34 1.25 1/4 0.71 0.49 3.31 0.78 0.30 1.49 2.22 2.30 1.16
2430
1770
2470
1.09
UCFASS-C206L-20-N UCFASS-T206L-20-N 1-1/4" 5.53 1.87 2.06 1.57 1.25 1/4 0.67 0.49 3.31 0.87 0.35 1.54 2.22 2.30 1.16
2530
1890
2470
1.18
For the full range of bearings, see the System Plast Bearing Line catalog.
145
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
UCP
Mounted Bearings
and Accessories
N
Z
M
D
B
A
Chrome Steel
Stainless Steel
OR
C1
D G (UNF) H
H1
J1
J2
Part Number
UCP-204L-12
3/4"
1/4 1.31
0.63 3.58 4.05 5.00 0.72 0.30 1.45 2.07 2.15 2.64 2210 1480
1400
0.66
50013 50013.APE
UCP-205L-16
1"
1/4 1.44
0.63 3.82 4.29 5.31 0.78 0.30 1.59 2.15 2.23 2.85 2430 1770
1770
0.81
50009 50009.APE
UCP-206L-20
1/4 1.69
0.87 4.37 5.08 6.14 0.87 0.35 1.86 2.50 2.58 3.42 3370 2540
2470
1.10
50010 50010.APE
UCP-207L-23
1/4 1.87
0.85 4.61 5.31 6.45 1.00 0.38 2.00 2.62 2.70 3.74 4430 3440
2700
1.54
50010 50010.APE
UCP-208L-24
0.85 5.08 5.79 7.05 1.26 0.43 2.05 2.62 2.70 3.94 5040 4020
2800
1.87
50014 50014.APE
3/4"
1/4 1.31
0.63 3.58 4.05 5.00 0.72 0.30 1.45 2.07 2.15 2.64 1640 1100
1400
0.66
50013 50013.APE
UCPSS-205L-16
1"
1/4 1.44
0.63 3.82 4.29 5.31 0.78 0.30 1.59 2.15 2.23 2.85 1820 1300
1770
0.81
50009 50009.APE
1/4 1.69
0.87 4.37 5.08 6.14 0.87 0.35 1.86 2.50 2.58 3.42 2530 1890
2470
1.10
50010 50010.APE
1/4 1.87
0.85 4.61 5.31 6.45 1.00 0.38 2.00 2.62 2.70 3.74 3300 2560
2700
1.54
50010 50010.APE
0.85 5.08 5.79 7.05 1.26 0.43 2.05 2.62 2.70 3.94 3780 3010
2800
1.87
50014 50014.APE
Stainless Steel
A new antimicrobial material for improved hygiene. Created
through new technology which will help equipment builders
meet the requirements of the USDA and other government
agencies as they relate to the prevention of contamination of
food products and the growth of bacteria.
For
P
CCs!
A
H ed
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered).
Stainless steel bearing insert.
C1
D G (UNF) H
H1
J1
J2
1/4 1.31 0.63 3.58 4.05 5.00 0.72 0.30 1.45 2.07 2.15 2.64
1640 1100
1400
1/4 1.44 0.63 3.82 4.29 5.31 0.78 0.30 1.59 2.15 2.23 2.85
1820 1300
1770
1/4 1.69 0.87 4.37 5.08 6.14 0.87 0.35 1.86 2.50 2.58 3.42
2530 1890
2470
1/4 1.87 0.85 4.61 5.31 6.45 1.00 0.38 2.00 2.62 2.70 3.74
3300 2560
2700
UCPSS-208L-24-N 1-1/2" 1.89 0.16 0.51 0.87 2.07 5/16 1.94 0.85 5.08 5.79 7.05 1.26 0.43 2.05 2.62 2.70 3.94
3780 3010
2800
UCPSS-205L-16-N
1"
For the full range of bearings, see the System Plast Bearing Line catalog.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
146
UCP sealed
Capped and Sealed
Pillow Block Bearings
Mounted Bearings
and Accessories
Chrome Steel
Stainless Steel
OR
Materials: Black polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
Yellow polypropylene safety cap. Seal and O-Ring is NBR rubber.
C1
D G (UNF) H
H1 J1 J2
Closed Cap
UCP-C204L-12
UCP-T204L-12
3/4"
1.22 0.12 0.43 0.67 1.12 1/4 1.31 0.63 3.58 4.05 5.00 0.72 0.30 1.45 2.07 2.15 2.64 2210
1480
1400
0.68
UCP-C205L-16
UCP-T205L-16
1"
1.38 0.12 0.43 0.67 1.34 1/4 1.44 0.63 3.82 4.29 5.31 0.78 0.30 1.59 2.15 2.22 2.85 2430
1770
1770
0.86
UCP-C206L-20
UCP-T206L-20
1-1/4" 1.61 0.18 0.51 0.87 1.57 1/4 1.69 0.87 4.37 5.08 6.14 0.87 0.35 1.86
2540
2470
1.15
UCP-C207L-23
UCP-T207L-23
1-7/16" 1.77 0.12 0.51 0.87 1.84 1/4 1.87 0.85 4.61 5.31 6.45 1.00 0.38 2.00 2.62 2.70 3.74 4430
3440
2700
1.59
UCP-C208L-24
UCP-T208L-24
1-1/2" 1.89 0.16 0.51 0.87 2.07 5/16 1.94 0.85 5.08 5.79 7.05 1.26 0.43 2.05 2.62 2.70 3.94 5040
4020
2800
1.92
2.5
UCPSS-T204L-12
3/4"
1.22 0.12 0.43 0.67 1.12 1/4 1.31 0.63 3.58 4.05 5.00 0.72 0.30 1.45 2.07 2.15 2.64 1640
1100
1400
0.68
UCPSS-C205L-16
UCPSS-T205L-16
1"
1.38 0.12 0.43 0.67 1.34 1/4 1.44 0.63 3.82 4.29 5.31 0.78 0.30 1.59 2.15 2.22 2.85 1820
1300
1770
0.86
UCPSS-C206L-20
UCPSS-T206L-20
1-1/4" 1.61 0.18 0.51 0.87 1.57 1/4 1.69 0.87 4.37 5.08 6.14 0.87 0.35 1.86
1890
2470
1.15
UCPSS-C207L-23
UCPSS-T207L-23
1-7/16" 1.77 0.12 0.51 0.87 1.84 1/4 1.87 0.85 4.61 5.31 6.45 1.00 0.38 2.00 2.62 2.70 3.74 3300
2560
2700
1.59
UCPSS-C208L-24
UCPSS-T208L-24
1-1/2" 1.89 0.16 0.51 0.87 2.07 5/16 1.94 0.85 5.08 5.79 7.05 1.26 0.43 2.05 2.62 2.70 3.94 3780
3010
2800
1.92
2.5
Stainless Steel
A new antimicrobial material for improved hygiene. Created
through new technology which will help equipment builders
meet the requirements of the USDA and other government
agencies as they relate to the prevention of contamination of
food products and the growth of bacteria.
For
P
CCs!
A
H ed
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
White polypropylene safety cap. Seal and O-Ring is NBR rubber.
Load Ratings (lbf) ship
Stainless Steel Insert
dynamic static max radial weight
Closed Cap
Through Shaft Cap
A B
C C1 D G (UNF) H H1 J1 J2 L M N T
U
V Z
C
Co on housing (lbs)
UCPSS-C204L-12-N UCPSS-T204L-12-N
3/4"
1.22 0.12 0.43 0.67 1.12 1/4 1.31 0.63 3.58 4.05 5.00 0.72 0.30 1.45 2.07 2.15 2.64 1640
1100
1400
0.68
UCPSS-C205L-16-N UCPSS-T205L-16-N
1"
1.38 0.12 0.43 0.67 1.34 1/4 1.44 0.63 3.82 4.29 5.31 0.78 0.30 1.59 2.15 2.22 2.85 1820
1300
1770
0.86
1890
2470
1.15
UCPSS-C207L-23-N UCPSS-T207L-23-N 1-7/16" 1.77 0.12 0.51 0.87 1.84 1/4 1.87 0.85 4.61 5.31 6.45 1.00 0.38 2.00 2.62 2.70 3.74 3300
2560
2700
1.59
UCPSS-C208L-24-N UCPSS-T208L-24-N 1-1/2" 1.89 0.16 0.51 0.87 2.07 5/16 1.94 0.85 5.08 5.79 7.05 1.26 0.43 2.05 2.62 2.70 3.94 3780
3010
2800
1.92
UCPSS-C206L-20-N UCPSS-T206L-20-N 1-1/4" 1.61 0.18 0.51 0.87 1.57 1/4 1.69 0.87 4.37 5.08 6.14 0.87 0.35 1.86
2.5
For the full range of bearings, see the System Plast Bearing Line catalog.
147
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
UCPA
Mounted Bearings
and Accessories
Tapped Base
Corrosion resistant housings are engineered to match
the load capacity and speed requirements of standard
bearing inserts. Self aligning and pre-lubricated bearing
inserts allows for a low maintenance and trouble-free
operation that is great for use in the food, beverage and
pharmaceutical industry.
Chrome Steel
Stainless Steel
OR
UCPA-204-12
3/4"
1.26 0.69
3/8
1.12 0.21
1/4 1.31
2210
1480
1460
0.66
50013 50013.APE
UCPA-205-16
1"
1.42 0.77
3/8
1.33 0.21
1/4 1.44
2430
1770
1770
0.81
50009 50009.APE
1/4 1.69
3370
2540
2470
1.10
50010 50010.APE
UCPA-206-20
B C (UNC) D
E G (UNF) H
H1
3/4"
1.26 0.69
3/8
1.12 0.21
1/4 1.31
1640
1100
1460
0.66
50013 50013.APE
UCPASS-205-16
1"
1.42 0.77
3/8
1.33 0.21
1/4 1.44
1820
1300
1770
0.81
50009 50009.APE
1/4 1.69
2530
1890
2470
1.10
50010 50010.APE
For
Stainless Steel
P
CCs!
A
H ed
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered).
Stainless steel bearing insert.
E G (UNF) H
H1
0.69
3/8
1.12
.21
1/4 1.31
0.63
2.0
2.75
.72
.30
1.35
1.93
2.01
2.56
1640
1100
1460
1.42
0.77
3/8
1.33
.21
1/4 1.44
0.63
2.0
2.95
.78
.30
1.49
2.12
2.20
2.83
1820
1300
1770
1-1/4" 1.57
0.79
7/16 1.57
.23
1/4 1.69
0.94
3.0
3.88
.87
.35
1.66
2.32
2.40
3.35
2530
1890
2470
3/4" 1.26
1"
B C (UNC) D
For the full range of bearings, see the System Plast Bearing Line catalog.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
148
UCPA sealed
Capped and Sealed
Tapped Base Bearings
Mounted Bearings
and Accessories
Chrome Steel
OR
Stainless Steel
Materials: Black polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
Yellow polypropylene safety cap. Seal and O-Ring is NBR rubber.
UCPA-C204-12
UCPA-T204-12
UCPA-C205-16
UCPA-T205-16
UCPA-C206-20
UCPA-T206-20
3/4" 1.26
1"
1.42
1-1/4" 1.57
B C (UNC) D
E G (UNF) H
H1
0.69
3/8
1.12 0.21 1/4 1.31 0.63 2.00 2.75 0.72 0.30 1.35 1.93 2.01 2.56
2210 1480
1400
0.68
0.77
3/8
1.33 0.21 1/4 1.44 0.63 2.00 2.95 0.78 0.30 1.49 2.12 2.20 2.83
2430 1770
1770
0.86
0.79 7/16
1.57 0.23 1/4 1.69 0.94 3.00 3.88 0.87 0.35 1.66 2.32 2.40 3.35
3370 2540
2470
1.15
UCPASS-T204-12
UCPASS-C205-16
UCPASS-T205-16
UCPASS-C206-20
UCPASS-T206-20
3/4" 1.26
1"
1.42
1-1/4" 1.57
0.69
3/8
1.12 0.21 1/4 1.31 0.63 2.00 2.75 0.72 0.30 1.35 1.93 2.01 2.56
1640 1100
1460
0.68
0.77
3/8
1.33 0.21 1/4 1.44 0.63 2.00 2.95 0.78 0.30 1.49 2.12 2.20 2.83
1820 1300
1770
0.86
0.79 7/16
1.57 0.23 1/4 1.69 0.94 3.00 3.88 0.87 0.35 1.66 2.32 2.40 3.35
2530 1890
2470
1.15
Stainless Steel
A new antimicrobial material for improved hygiene. Created
through new technology which will help equipment builders
meet the requirements of the USDA and other government
agencies as they relate to the prevention of contamination of
food products and the growth of bacteria.
For
P
CCs!
A
H ed
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
White polypropylene safety cap. Seal and O-Ring is NBR rubber.
Closed Cap
UCPASS-C204-12-N
UCPASS-T204-12-N
UCPASS-C205-16-N
UCPASS-T205-16-N
UCPASS-C206-20-N
3/4" 1.26
1"
1.42
B C (UNC) D
E G (UNF) H
H1
0.69
3/8
1.12 0.21 1/4 1.31 0.63 2.00 2.75 0.72 0.30 1.35 1.93 2.01 2.56
1640 1100
1460
0.68
0.77
3/8
1.33 0.21 1/4 1.44 0.63 2.00 2.95 0.78 0.30 1.49 2.12 2.20 2.83
1820 1300
1770
0.86
0.79 7/16
1.57 0.23 1/4 1.69 0.94 3.00 3.88 0.87 0.35 1.66 2.32 2.40 3.35
2530 1890
2470
1.15
For the full range of bearings, see the System Plast Bearing Line catalog.
149
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
UCFG
Mounted Bearings
and Accessories
Flange Bearing
with Solid Housings
Chrome Steel
Stainless Steel
OR
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
Load Ratings (lbf)
ship
Yellow
dynamic static max radial weight
safety cap
C
Co on housing (lbs) closed through shaft
UCFG-205L-16
1"
F G (UNF) H
2430
1770
1130
0.55
50009
50009.APE
1-1/4" 4.45 3.58 0.43 1.57 2.22 1/4 0.53 0.65 3.31
3370
2540
1350
0.66
50027
50027.APE
1820
1300
1130
0.55
50009
50009.APE
UCFGSS-206L-20 1-1/4" 4.45 3.58 0.43 1.57 2.22 1/4 0.53 0.65 3.31
2530
1900
1350
0.66
50027
50027.APE
UCFG-206L-20
1"
UCFG sealed
Capped and Sealed
Flange Bearing
with Solid Housings
Closed version
with set screws
Chrome Steel
UCFG-C205L-16
UCFG-T205L-16
1"
UCFG-C206L-20
UCFG-T205L-20
OR
Stainless Steel
Materials: Black polyamide support housing (polypropylene can be special ordered). Stainless steel
bearing insert. Yellow polypropylene safety cap. Seal and O-Ring is NBR rubber.
Load Ratings (lbf)
ship
dynamic static max radial weight
A
B
C
D
F G (UNF) H J
L M N T U
V
Z
C
Co on housing (lbs)
3.76 3.00 0.33 1.34 1.87 1/4 0.53 0.65 2.79 0.78 0.30 1.31 1.89 1.97 0.98
2430
1770
1130
0.66
1-1/4" 4.45 3.58 0.43 1.57 2.22 1/4 0.53 0.65 3.31 0.87 0.35 1.40 2.12 2.20 1.06
3370
2540
1350
0.77
UCFGSS-T205L-16
3.76 3.00 0.33 1.34 1.87 1/4 0.53 0.65 2.79 0.78 0.30 1.31 1.89 1.97 0.98
1820
1300
1130
0.66
UCFGSS-C206L-20
UCFGSS-T205L-20 1-1/4" 4.45 3.58 0.43 1.57 2.22 1/4 0.53 0.65 3.31 0.87 0.35 1.40 2.12 2.20 1.06
1"
2530
1900
1350
0.77
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
150
UCF
Ribbed Flange Bearing
Corrosion resistant housings have good
resistance to many corrosive chemicals
such as water, oils, grease, gasoline, wine,
and alcoholic beverages. Self aligning
and pre-lubricated bearing inserts allows
for a low maintenance and trouble-free
operation.
version with
set screws
Safety caps
are available.
Chrome Steel
Mounted Bearings
and Accessories
Stainless Steel
OR
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
Part Number
UCF-204-12
3/4"
3.39
1/4
0.59
1.97
2.05 0.98
2210
1480
2880
0.51
50003
50003.APE
UCF-205-16
1"
3.86
1/4
0.59
1.97
2.05 0.98
2420
1750
2920
0.90
50003
50003.APE
UCF-206-20
1-1/4"
4.33
1/4
0.71
2.09
2.17 1.22
3370
2540
2920
1.28
50001
50001.APE
UCF-207-23
1-7/16" 4.65
1/4
0.79
2.64
2.76 1.38
4420
3440
2920
1.76
50002
50002.APE
UCF-208-24
1-1/2"
2.64
2.72 1.38
5030
4020
2920
1.98
50002
50002.APE
5.12
D G (UNF) H
3/4"
3.39
1/4
0.59
1.97
2.05 0.98
1640
1100
2880
0.51
50003
50003.APE
UCFSS-205-16
1"
3.86
1/4
0.59
1.97
2.05 0.98
1820
1300
2920
0.90
50003
50003.APE
UCFSS-206-20
1-1/4"
4.33
1/4
0.71
2.09
2.17 1.22
2530
1890
2920
1.28
50001
50001.APE
UCFSS-207-23
1-7/16" 4.65
1/4
0.79
2.64
2.76 1.38
3300
2560
2920
1.76
50002
50002.APE
UCFSS-208-24
1-1/2"
2.64
2.72 1.38
3780
3010
2920
1.98
50002
50002.APE
5.12
UCF sealed
Capped and Sealed
Ribbed Flange Bearing
Chrome Steel
OR
Through shaft
version with
set screws
closed version
with set screws
Stainless Steel
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
Closed Cap
G (UNF)
UCF-C204-12
UCF-T204-12
3/4"
3.39
2.48
0.43
1.12
1/4
0.59
0.75
0.72
0.30
1.31
1.97
2.05 0.98
2210
1480
2880
UCF-C205-16
UCF-T205-16
1"
3.86
2.75
0.43
1.34
1/4
0.59
0.75
0.78
0.30
1.37
1.97
2.05 0.98
2420
1750
2920
0.93
UCF-C206-20
UCF-T206-20
1-1/4" 4.33
3.27
0.43
1.57
1/4
0.71
0.98
0.87
0.35
1.58
2.09
2.17 1.22
3370
2540
2920
1.42
UCF-C207-23
UCF-T207-23
1-7/16" 4.65
3.62
0.51
1.84
1/4
0.79
0.98
1.00
0.38
1.79
2.64
2.76 1.38
4420
3440
2920
1.93
UCF-C208-24
UCF-T208-24
1-1/2" 5.12
4.00
0.51
0.98
1.18
0.43
1.97
2.64
2.72 1.38
5030
4020
2920
2.16
0.61
0.61
3/4"
3.39
2.48
0.43
1.12
1/4
0.59
0.75
0.72
0.30
1.31
1.97
2.05
0.98
1640
1100
2880
UCFSS-C205-16 UCFSS-T205-16
1"
3.86
2.75
0.43
1.34
1/4
0.59
0.75
0.78
0.30
1.37
1.97
2.05
0.98
1820
1300
2920
0.93
UCFSS-C206-20 UCFSS-T206-20
1-1/4"
4.33
3.27
0.43
1.57
1/4
0.71
0.98
0.87
0.35
1.58
2.09
2.17
1.22
2530
1890
2920
1.42
1/4
3.62
0.51
1.84
0.79
0.98
1.00
0.38
1.79
2.64
2.76
1.38
3300
2560
2920
1.93
UCFSS-C208-24 UCFSS-T208-24
4.00
0.51
0.98
1.18
0.43
1.97
2.64
2.72
1.38
3780
3010
2920
2.16
1-1/2"
5.12
151
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
UCFL
Mounted Bearings
and Accessories
version with
set screws
Safety caps
are available.
Chrome Steel
Stainless Steel
OR
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
Load Ratings (lbf)
ship
Yellow
dynamic static max radial weight
safety cap
C
Co on housing (lbs) closed through shaft
UCFL-204-12
3/4"
4.72
3.54
0.43 1.12
3.54 1/4 0.59 0.75 0.72 0.30 1.31 1.81 1.89 0.98
F G (UNF) H
2210
1480
1690
0.74
50003 50003.APE
UCFL-205-16
1"
5.12
3.90
0.43 1.34
3.54 1/4 0.59 0.75 0.78 0.30 1.37 1.81 1.89 0.98
2430
1770
1710
0.98
50003 50003.APE
UCFL-206-20
1-1/4" 5.75
4.61
0.43 1.57
3.86 1/4 0.79 0.98 0.87 0.35 1.66 2.64 2.72 1.38
3370
2540
2900
1.21
UCFL-207-23
1-7/16" 6.26
5.12
0.51 1.84
4.13 1/4 0.79 0.98 1.00 0.38 1.79 2.64 2.72 1.38
4430
3440
3000
1.70
50002 50002.APE
3/4"
4.72
3.54
0.43 1.12
3.54 1/4 0.59 0.75 0.72 0.30 1.31 1.81 1.89 0.98
1640
1100
1690
0.74
50003 50003.APE
UCFLSS-205-16
1"
5.12
3.90
0.43 1.34
3.54 1/4 0.59 0.75 0.78 0.30 1.37 1.81 1.89 0.98
1820
1300
1710
0.98
50003 50003.APE
UCFLSS-206-20
1-1/4" 5.75
4.61
0.43 1.57
3.86 1/4 0.79 0.98 0.87 0.35 1.66 2.64 2.72 1.38
2530
1890
2900
1.21
UCFLSS-207-23
1-7/16" 6.26
5.12
0.51 1.84
4.13 1/4 0.79 0.98 1.00 0.38 1.79 2.64 2.72 1.38
3300
2560
3000
1.70
50002 50002.APE
UCFL sealed
Capped and Sealed
Ribbed Flange Bearing
Chrome Steel
closed version
with set screws
Stainless Steel
OR
Through shaft
version with
set screws
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
F G (UNF) H
Closes Cap
UCFL-C204-12
UCFL-T204-12
3/4"
4.72
0.75 0.72
1.89 0.98
2210
1480
1690
0.90
UCFL-C205-16
UCFL-T205-16
1"
5.12
0.75 0.78
1.89 0.98
2430
1770
1710
1.14
UCFL-C206-20
UCFL-T206-20
1-1/4"
5.75
0.98 0.87
2.72 1.38
3370
2540
2900
1.38
UCFL-C207-23
UCFL-T207-23
1-7/16" 6.26
0.98 1.00
2.72 1.38
4430
3440
3000
1.76
UCFLSS-T204-12
3/4"
4.72
0.75 0.72
1.89 0.98
1640
1100
1690
0.90
UCFLSS-C205-16
UCFLSS-T205-16
1"
5.12
0.75 0.78
1.89 0.98
1820
1300
1710
1.14
UCFLSS-C206-20
UCFLSS-T206-20
1-1/4"
5.75
0.98 0.87
2.72 1.38
2530
1890
2900
1.38
UCFLSS-C207-23
UCFLSS-T207-23
1-7/16" 6.26
0.98 1.00
2.72 1.38
3300
2560
3000
1.76
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
152
UCFG
Flange Bearing
with Solid Housings
Mounted Bearings
and Accessories
Chrome Steel
Stainless Steel
OR
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
Load Ratings (lbf)
ship
Yellow
dynamic static max radial weight
safety cap
C
Co on housing (lbs) closed through shaft
UCFG-205L-M25
25mm 3.76 3.00 0.33 1.34 1.87 M6x.75 0.53 0.65 2.79
1.89
1.97 0.98
2430
1770
1130
0.55
50009 50009.APE
UCFG-206L-M30
30mm 4.45 3.58 0.43 1.57 2.22 M6x.75 0.53 0.65 3.31
2.12
2.20 1.06
3370
2540
1350
0.66
50027 50027.APE
UCFGSS-205L-M25 25mm 3.76 3.00 0.33 1.34 1.87 M6x.75 0.53 0.65 2.79
1.89
1.97 0.98
1820
1300
1130
0.55
50009 50009.APE
UCFGSS-206L-M30 30mm 4.45 3.58 0.43 1.57 2.22 M6x.75 0.53 0.65 3.31
2.12
2.20 1.06
2530
1900
1350
0.66
50027 50027.APE
UCFG sealed
Capped and Sealed
Flange Bearing
with Solid Housings
Closed version
with set screws
Chrome Steel
OR
Stainless Steel
Materials: Black polyamide support housing (polypropylene can be special ordered). Stainless steel
bearing insert. Yellow polypropylene safety cap. Seal and O-Ring is NBR rubber.
Load Ratings (lbf)
ship
dynamic static max radial weight
A
B
C
D F
G
H J
L M N T U
V
Z
C
Co on housing (lbs)
Closed Cap
UCFG-C205L-M25
UCFG-T205L-M25
25mm 3.76 3.00 0.33 1.34 1.87 M6x.75 0.53 0.65 2.79 0.78 0.30 1.31 1.89 1.97 0.98
2430
1770
1130
0.66
UCFG-C206L-M30
UCFG-T205L-M30
30mm 4.45 3.58 0.43 1.57 2.22 M6x.75 0.53 0.65 3.31 0.87 0.35 1.40 2.12 2.20 1.06
3370
2540
1350
0.77
UCFGSS-C205L-M25
UCFGSS-T205L-M25 25mm 3.76 3.00 0.33 1.34 1.87 M6x.75 0.53 0.65 2.79 0.78 0.30 1.31 1.89 1.97 0.98
1820
1300
1130
0.66
UCFGSS-C206L-M30
UCFGSS-T205L-M30 30mm 4.45 3.58 0.43 1.57 2.22 M6x.75 0.53 0.65 3.31 0.87 0.35 1.40 2.12 2.20 1.06
2530
1900
1350
0.77
For the full range of bearings, see the System Plast Bearing Line catalog.
153
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
UCFQ
Mounted Bearings
and Accessories
Flange Bearing
with Solid Housings
Chrome Steel
Stainless Steel
OR
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
UCFQ-204L-M20
20mm
3.39
1.89
1.97 1.02
2210 1480
2250
0.48
50013
50013.APE
UCFQ-205L-M25
25mm
3.74
2.05
2.13 1.14
2430 1770
2430
0.70
50009
50009.APE
UCFQ-206L-M30
30mm
4.25
2.20
2.28 1.14
3370 2540
2590
1.06
50010
50010.APE
UCFQ-207L-M35
35mm
4.65
2.36
2.44 1.30
4430 3440
2700
1.39
50010
50010.APE
UCFQ-208L-M40
40mm
5.12
2.28
2.36 1.38
5040 4020
2810
1.76
50014
50014.APE
Part Number
20mm
3.39
1.89
1.97 1.02
1640 1100
2250
0.48
50013
50013.APE
UCFQSS-205L-M25
25mm
3.74
2.05
2.13 1.14
1820 1300
2430
0.70
50009
50009.APE
UCFQSS-206L-M30
30mm
4.25
2.20
2.28 1.14
2530 1890
2590
1.06
50010
50010.APE
UCFQSS-207L-M35
35mm
4.65
2.36
2.44 1.30
3300 2560
2700
1.39
50010
50010.APE
UCFQSS-208L-M40
40mm
5.12
2.28
2.36 1.38
3780 3010
2810
1.76
50014
50014.APE
For
P
CCs!
A
H ed
Ne
Stainless Steel
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
UCFQSS-204-M20-N
20MM
3.39
1.89
1.97 1.02
1640 1100
2250
0.48
50007-N 50007.APE-N
UCFQSS-205-M25-N
25MM
3.74
2.05
2.13 1.14
1820 1300
2430
0.70
50011-N 50011.APE-N
UCFQSS-206-M30-N
30MM
4.25
2.20
2.28 1.14
2530 1890
2590
1.06
50001-N 50001.APE-N
UCFQSS-207-M35-N
35MM
4.65
2.36
2.44 1.30
3300 2560
2700
1.39
50004-N 50004.APE-N
UCFQSS-208-M40-N
40MM
5.12
2.28
2.36 1.38
3780 3010
2810
1.76
50002-N 50002.APE-N
Part Number
For the full range of bearings, see the System Plast Bearing Line catalog.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
154
UCFQ sealed
Capped and Sealed Flange
Bearing with Solid Housing
Available with through shaft or closed caps.
Closed version
with set screws
Chrome Steel
Chrome Steel
Closed Cap
OR
Mounted Bearings
and Accessories
Stainless Steel
Materials: Black polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
Yellow polypropylene safety cap. Seal and O-Ring is NBR rubber.
Load Ratings (lbf)
ship
Insert
dynamic static max radial weight
Through Shaft Cap
A
B
C
D
G
H
J
M
N
T
U
V
Z
C
Co on housing (lbs)
UCFQ-C204L-M20
UCFQ-T204L-M20
20mm
3.39
2.50
0.43
0.39
0.72
0.30 1.33
1.89
1.97 1.02
2210
1480
2250
0.51
UCFQ-C205L-M25
UCFQ-T205L-M25
25mm
3.74
2.76
0.43
0.48
0.78
0.30 1.45
2.05
2.13 1.14
2430
1770
2430
0.75
UCFQ-C206L-M30
UCFQ-T206L-M30
30mm
4.25
3.25
0.43
0.48
0.87
0.35 1.44
2.20
2.28 1.14
3370
2540
2590
1.10
UCFQ-C207L-M35
UCFQ-T207L-M35
35mm
4.65
3.62
0.55
0.62
1.00
0.38 1.71
2.36
2.44 1.30
4430
3440
2700
1.43
UCFQ-C208L-M40
UCFQ-T208L-M40
40mm
5.12
4.00
0.55
0.62
1.19
0.43 1.89
2.28
2.36 1.38
5040
4020
2810
1.81
3.39
2.50
0.43
0.39
0.72
0.30 1.33
1.89
1.97 1.02
2210
1480
2250
0.51
3.74
2.76
0.43
0.48
0.78
0.30 1.45
2.05
2.13 1.14
2430
1770
2430
0.75
4.25
3.25
0.43
0.48
0.87
0.35 1.44
2.20
2.28 1.14
3370
2540
2590
1.10
4.65
3.62
0.55
0.62
1.00
0.38 1.71
2.36
2.44 1.30
4430
3440
2700
1.43
5.12
4.00
0.55
0.62
1.19
0.43 1.89
2.28
2.36 1.38
5040
4020
2810
1.81
For
Stainless Steel
P
CCs!
A
H ed
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
White polypropylene safety cap. Seal and O-Ring is NBR rubber.
Closed Cap
UCFQSS-C204-M20-N
UCFQSS-T204-M20-N
20mm 3.39
2.50
2210
1480
2250
0.51
UCFQSS-C205-M25-N
UCFQSS-T205-M25-N
25mm 3.74
2.76
2430
1770
2430
0.75
UCFQSS-C206-M30-N
UCFQSS-T206-M30-N
30mm 4.25
3.25
3370
2540
2590
1.10
UCFQSS-C207-M35-N
UCFQSS-T207-M35-N
35mm 4.65
3.62
4430
3440
2700
1.43
UCFQSS-C208-M40-N
UCFQSS-T208-M40-N
40mm 5.12
4.00
5040
4020
2810
1.81
For the full range of bearings, see the System Plast Bearing Line catalog.
155
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
UCFH
Mounted Bearings
and Accessories
Flange Bearing
with Solid Housings
N M
Chrome Steel
Stainless Steel
OR
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
UCFH-204L-M20
20mm 4.49
3.54
0.43 1.12
2.52 M6x.75 0.61 0.39 0.72 0.30 1.33 1.89 1.97 1.02
2210
1480
1690
0.44
50013
50013.APE
UCFH-205L-M25
25mm 5.12
3.90
0.43 1.34
2.76 M6x.75 0.67 0.49 0.78 0.30 1.45 2.05 2.13 1.14
2430
1770
1800
0.66
50009
50009.APE
UCFH-206L-M30
30mm 5.83
4.61
0.43 1.57
3.31 M6x.75 0.57 0.49 0.87 0.35 1.44 2.20 2.28 1.14
3370
2540
1980
0.99
50010
50010.APE
UCFH-207L-M35
35mm 6.42
5.12
0.55 1.84
3.54 M6x.75 0.71 0.63 1.00 0.38 1.71 2.36 2.44 1.30
4430
3440
2020
1.32
50010
50010.APE
UCFH-208L-M40
40mm 6.89
5.67
0.55 2.07
4.06 M8x1.0 0.71 0.79 1.18 0.43 1.89 2.28 2.36 1.38
5040
4020
2810
1.76
50014
50014.APE
20mm
4.49
3.54
0.43 1.12
1.14
1640
1100
1690
0.44
50013 50013.APE
UCFHSS-205L-M25
25mm
5.12
3.90
0.43 1.34
1.14
1820
1300
1800
0.66
50009 50009.APE
UCFHSS-206L-M30
30mm
5.83
4.61
0.43 1.57
1.14
2530
1890
1980
0.99
50010 50010.APE
UCFHSS-207L-M35
35mm
6.42
5.12
0.55 1.84
1.30
3300
2560
2020
1.32
50010 50010.APE
UCFHSS-208L-M40
40mm
6.89
5.67
0.55 2.07
1.38
3780
3010
2810
1.76
50014 50014.APE
For
P
CCs!
A
H ed
Ne
Stainless Steel
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
2.52 M6x.75 0.61 0.49 0.72 0.30 1.33 1.89 1.97 1.14
1640 1100
1690
0.44
50007-N 50007.APE-N
2.76 M6x.75 0.67 0.49 0.78 0.30 1.45 2.05 2.13 1.14
1820 1300
1800
0.66
50011-N 50011.APE-N
3.31 M6x.75 0.57 0.49 0.87 0.35 1.44 2.20 2.28 1.14
2530 1890
1980
0.99
50001-N 50001.APE-N
3.54 M6x.75 0.71 0.63 1.00 0.38 1.71 2.36 2.44 1.30
3300 2560
2020
1.32
50004-N 50004.APE-N
4.06 M8x1.0 0.71 0.79 1.18 0.43 1.89 2.28 2.36 1.38
3780 3010
2810
1.76
50002-N 50002.APE-N
For the full range of bearings, see the System Plast Bearing Line catalog.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
156
UCFH sealed
Capped and Sealed Flange
Bearing with Solid Housings
N M
Closed version
with set screws
Chrome Steel
OR
Mounted Bearings
and Accessories
Stainless Steel
Materials: Black polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
Yellow polypropylene safety cap. Seal and O-Ring is NBR rubber.
Closed Cap
UCFH-C204L-M20
UCFH-T204L-M20
20mm 4.49
3.54
0.72
0.30 1.33
1.89
1.97 1.02
2210
1480
1690
0.46
UCFH-C205L-M25
UCFH-T205L-M25
25mm 5.12
3.90
0.78
0.30 1.45
2.05
2.13 1.14
2430
1770
1800
0.70
UCFH-C206L-M30
UCFH-T206L-M30
30mm 5.83
4.61
0.87
0.35 1.44
2.20
2.28 1.14
3370
2540
1980
1.03
UCFH-C207L-M35
UCFH-T207L-M35
35mm 6.42
5.12
1.00
0.38 1.71
2.36
2.44 1.30
4430
3440
2020
1.36
UCFH-C208L-M40
UCFH-T208L-M40
40mm 6.89
5.67
1.18
0.43 1.89
2.28
2.36 1.38
5040
4020
2810
1.81
3.54
0.72
0.30 1.33
1.89
1.97 1.02
1640
1100
1690
0.46
3.90
0.78
0.30 1.45
2.05
2.13 1.14
1820
1300
1800
0.70
4.61
0.87
0.35 1.44
2.20
2.28 1.14
2530
1890
1980
1.03
5.12
1.00
0.38 1.71
2.36
2.44 1.30
3300
2560
2020
1.36
5.67
1.18
0.43 1.89
2.28
2.36 1.38
3780
3010
2810
1.81
Stainless Steel
For
P
CCs!
A
H ed
Stainless Steel
Closed Cap
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
White polypropylene safety cap. Seal and O-Ring is NBR rubber.
Load Ratings (lbf)
ship
Insert
dynamic static max radial weight
A
B
C
D
F
G
H
J M
N T
U
V Z
C
Co on housing (lbs)
Through Shaft Cap
3.54
0.43 1.12 2.52 M6x.75 0.61 0.39 0.72 0.30 1.33 1.89 1.97 1.02
1640
1100
1690
0.46
3.90
0.43 1.34 2.76 M6x.75 0.67 0.49 0.78 0.30 1.45 2.05 2.13 1.14
1820
1300
1800
0.70
4.61
0.43 1.57 3.31 M6x.75 0.57 0.49 0.87 0.35 1.44 2.20 2.28 1.14
2530
1890
1980
1.03
5.12
0.55 1.84 3.54 M6x.75 0.71 0.63 1.00 0.38 1.71 2.36 2.44 1.30
3300
2560
2020
1.36
5.67
0.55 2.07 4.06 M8x1.0 0.71 0.79 1.18 0.43 1.89 2.28 2.36 1.38
3780
3010
2810
1.81
For the full range of bearings, see the System Plast Bearing Line catalog.
157
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
T
Z
U
G
UCFA
Mounted Bearings
and Accessories
Flange Bearing
with Solid Housings
F
7/16
Chrome Steel
OR
Stainless Steel
UCFA-205L-M20
20mm 4.92
0.49
2.71 0.72
2210
1480
2140
0.77
50013 50013.APE
UCFA-205L-M25
25mm 4.92
0.49
2.71 0.78
2430
1770
2023
0.88
50009 50009.APE
UCFA-206L-M25
25mm 5.53
0.49
3.31 0.78
2430
1770
2470
1.08
50010 50010.APE
UCFA-206L-M30
30mm 5.53
0.49
3.31 0.87
3370
2540
2470
1.48
50010 50010.APE
0.49
2.71 0.92
2210
1486
2140
0.77
50013 50013.APE
0.49
2.71 0.92
2430
1770
2023
0.88
50009 50009.APE
0.49
3.31 0.78
2430
1770
2470
1.08
50010 50010.APE
0.49
3.31 0.87
2530
1890
2470
1.48
50010 50010.APE
For
P
CCs!
A
H ed
Ne
Stainless Steel
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
UCFASS-205L-M20-N
0.49
2210 1486
2140
UCFASS-205L-M25-N
0.49
2430 1770
2023
UCFASS-206L-M25-N
0.49
2430 1770
2470
UCFASS-206L-M30-N
0.49
2530 1890
2470
For the full range of bearings, see the System Plast Bearing Line catalog.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
158
UCFA sealed
T
Z
Mounted Bearings
and Accessories
F
7/16
B
H
Closed version
with set screws
Chrome Steel
OR
Stainless Steel
Materials: Black polyamide support housing (polypropylene can be special ordered). Stainless steel bearing
insert. Yellow polypropylene safety cap. Seal and O-Ring is NBR rubber.
Load Ratings (lbf)
ship
dynamic static max radial weight
B
C D F
G H
J
L
M
N T
U
V Z
C
Co on housing (lbs)
Closed Cap
UCFA-C205L-M20
UCFA-T205L-M20
1.81 1.12 1.12 M6x.75 0.67 0.49 2.71 0.72 0.30 1.39 1.95 2.14 1.08
2210
1480
2140
0.79
UCFA-C205L-M25
UCFA-T205L-M25
1.81 1.34 1.12 M6x.75 0.63 0.49 2.71 0.78 0.30 1.41 2.06 2.14 1.08
2430
1770
2023
0.93
UCFA-C206L-M25
UCFA-T206L-M25
2.06 1.34 1.25 M6x.75 0.71 0.49 3.31 0.78 0.30 1.49 2.22 2.30 1.16
2430
1770
2470
1.04
UCFA-C206L-M30
UCFA-T206L-M30
2.06 1.57 1.25 M6x.75 0.67 0.49 3.31 0.87 0.35 1.54 2.22 2.30 1.16
3370
2540
2470
1.53
UCFASS-C205L-M20
1.81 1.12 1.12 M6x.75 0.67 0.49 2.71 0.72 0.30 1.39 1.95 2.14 1.08
2210
1486
2140
0.79
UCFASS-C205L-M25
1.81 1.34 1.12 M6x.75 0.63 0.49 2.71 0.78 0.30 1.41 2.06 2.14 1.08
2430
1770
2023
0.93
UCFASS-C206L-M25
2.06 1.34 1.25 M6x.75 0.71 0.49 3.31 0.78 0.30 1.49 2.22 2.30 1.16
2430
1770
2470
1.04
UCFASS-C206L-M30
2.06 1.57 1.25 M6x.75 0.67 0.49 3.31 0.87 0.35 1.54 2.22 2.30 1.16
2530
1890
2470
1.53
Stainless Steel
A new antimicrobial material for improved hygiene. Created
through new technology which will help equipment builders
meet the requirements of the USDA and other government
agencies as they relate to the prevention of contamination of
food products and the growth of bacteria.
For
P
CCs!
A
H ed
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered).
Stainless steel bearing insert. White polypropylene safety cap. Seal and O-Ring is NBR rubber.
Load Ratings (lbf)
ship
dynamic static max radial weight
A
B
C
D F
G H
J
L
M N
T U
V Z
C
Co on housing (lbs)
UCFASS-C205L-M20-N UCFASS-T205L-M20-N 20mm 4.92 1.62 1.81 1.12 1.12 M6x.75 0.67 0.49 2.71 0.72 0.30 1.39 1.95 2.14 1.08
2210
1486
2140
0.79
UCFASS-C205L-M25-N UCFASS-T205L-M25-N 25mm 4.92 1.62 1.81 1.34 1.12 M6x.75 0.63 0.49 2.71 0.78 0.30 1.41 2.06 2.14 1.08
2430
1770
2023
0.93
UCFASS-C206L-M25-N UCFASS-T206L-M25-N 25mm 5.53 1.87 2.06 1.34 1.25 M6x.75 0.71 0.49 3.31 0.78 0.30 1.49 2.22 2.30 1.16
2430
1770
2470
1.04
UCFASS-C206L-M30-N UCFASS-T206L-M30-N 30mm 5.53 1.87 2.06 1.57 1.25 M6x.75 0.67 0.49 3.31 0.87 0.35 1.54 2.22 2.30 1.16
2530
1890
2470
1.15
For the full range of bearings, see the System Plast Bearing Line catalog.
159
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
UCP
Mounted Bearings
and Accessories
N
Z
M
D
B
A
Chrome Steel
Stainless Steel
OR
C1
H1
J1
UCP-204L-M20
20mm 1.22
0.12
0.43
0.67
0.63
3.58 4.05
5.00
0.72
0.30
1.45
2.07
2.15 2.64
2210 1480
1400
0.66
50013 50013.APE
UCP-205L-M25
25mm 1.38
0.12
0.51
0.87
0.63
3.82 4.29
5.31
0.78
0.30
1.59
2.15
2.23 2.85
2430 1770
1770
0.81
50009 50009.APE
UCP-206L-M30
30mm 1.61
0.18
0.51
0.87
0.87
4.37 5.08
6.14
0.87
0.35
1.86
2.50
2.58 3.42
3370 2540
2470
1.10
50010 50010.APE
UCP-207L-M35
35mm 1.77
0.12
0.51
0.87
0.85
4.61 5.31
6.45
1.00
0.38
2.00
2.62
2.70 3.74
4430 3440
2700
1.54
50010 50010.APE
UCP-208L-M40
40mm 1.89
0.16
0.51
0.87
0.85
5.08 5.79
7.05
1.26
0.43
2.05
2.62
2.70 3.94
5040 4020
2800
1.87
50014 50014.APE
0.12
0.43
0.67
0.63
3.58 4.05
5.00
0.72
0.30
1.45
2.07
2.15 2.64
1640 1100
1400
0.66
50013 50013.APE
0.12
0.43
0.67
0.63
3.82 4.29
5.31
0.78
0.30
1.59
2.15
2.23 2.85
1820 1300
1770
0.81
50009 50009.APE
0.18
0.51
0.87
0.87
4.37 5.08
6.14
0.87
0.35
1.86
2.50
2.58 3.42
2530 1890
2470
1.10
50010 50010.APE
0.12
0.51
0.87
0.85
4.61 5.31
6.45
1.00
0.38
2.00
2.62
2.70 3.74
3300 2560
2700
1.54
50010 50010.APE
0.16
0.51
0.87
0.85
5.08 5.79
7.05
1.26
0.43
2.05
2.62
2.70 3.94
3780 3010
2800
1.87
50014 50014.APE
Part Number
J2
Stainless Steel
A new antimicrobial material for improved hygiene. Created
through new technology which will help equipment builders
meet the requirements of the USDA and other government
agencies as they relate to the prevention of contamination of
food products and the growth of bacteria.
For
P
CCs!
A
H ed
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel
bearing insert.
C1
H1
J1
UCPSS-204L-M20-N
0.43
0.67
0.63
0.72
1640 1100
1400
UCPSS-205L-M25-N
0.43
0.67
0.63
0.78
1820 1300
1770
UCPSS-206L-M30-N
0.51
0.87
0.87
0.87
2530 1890
2470
UCPSS-207L-M35-N
0.51
0.87
0.85
1.00
3300 2560
2700
UCPSS-208L-M40-N
0.51
0.87
0.85
1.26
3780 3010
2800
Part Number
J2
For the full range of bearings, see the System Plast Bearing Line catalog.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
160
UCP sealed
Capped and Sealed
Pillow Block Bearings
Mounted Bearings
and Accessories
Chrome Steel
Stainless Steel
OR
Materials: Black polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
Yellow polypropylene safety cap. Seal and O-Ring is NBR rubber.
C1 D
H H1 J1 J2
Closed Cap
UCP-C204L-M20
UCP-T204L-M20
20mm 1.22 0.12 0.43 0.67 1.12 M6x.75 1.31 0.63 3.58 4.05 5.00 0.72 0.30 1.45 2.07 2.15 2.64 2210 1480
1400
UCP-C205L-M25
UCP-T205L-M25
25mm 1.38 0.12 0.43 0.67 1.34 M6x.75 1.44 0.63 3.82 4.29 5.31 0.78 0.30 1.59 2.15 2.22 2.85 2430 1770
1770
0.86
UCP-C206L-M30
UCP-T206L-M30
30mm 1.61 0.18 0.51 0.87 1.57 M6x.75 1.69 0.87 4.37 5.08 6.14 0.87 0.35 1.86
2470
1.15
UCP-C207L-M35
UCP-T207L-M35
35mm 1.77 0.12 0.51 0.87 1.84 M6x.75 1.87 0.85 4.61 5.31 6.45 1.00 0.38 2.00 2.62 2.70 3.74 4430 3440
2700
1.59
UCP-C208L-M40
UCP-T208L-M40
40mm 1.89 0.16 0.51 0.87 2.07 M8x1.0 1.94 0.85 5.08 5.79 7.05 1.26 0.43 2.05 2.62 2.70 3.94 5040 4020
2800
1.92
UCPSS-C204L-M20 UCPSS-T204L-M20 20mm 1.22 0.12 0.43 0.67 1.12 M6x.75 1.31 0.63 3.58 4.05 5.00 0.72 0.30 1.45 2.07 2.15 2.64 1640 1100
1400
0.68
UCPSS-C205L-M25 UCPSS-T205L-M25 25mm 1.38 0.12 0.43 0.67 1.34 M6x.75 1.44 0.63 3.82 4.29 5.31 0.78 0.30 1.59 2.15 2.22 2.85 1820 1300
1770
0.86
UCPSS-C206L-M30 UCPSS-T206L-M30 30mm 1.61 0.18 0.51 0.87 1.57 M6x.75 1.69 0.87 4.37 5.08 6.14 0.87 0.35 1.86
2470
1.15
UCPSS-C207L-M35 UCPSS-T207L-M35 35mm 1.77 0.12 0.51 0.87 1.84 M6x.75 1.87 0.85 4.61 5.31 6.45 1.00 0.38 2.00 2.62 2.70 3.74 3300 2560
2700
1.59
UCPSS-C208L-M40 UCPSS-T208L-M40 40mm 1.89 0.16 0.51 0.87 2.07 M8x1.0 1.94 0.85 5.08 5.79 7.05 1.26 0.43 2.05 2.62 2.70 3.94 3780 3010
2800
1.92
2.5
0.68
2.5
Stainless Steel
A new antimicrobial material for improved hygiene. Created
through new technology which will help equipment builders
meet the requirements of the USDA and other government
agencies as they relate to the prevention of contamination of
food products and the growth of bacteria.
For
P
CCs!
A
H ed
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
White polypropylene safety cap. Seal and O-Ring is NBR rubber.
Load Ratings (lbf) ship
Stainless Steel Insert
dynamic static max radial weight
Closed Cap
Through Shaft Cap
A B C C1 D
G
H H1 J1 J2 L M N T
U
V Z
C
Co on housing (lbs)
UCPSS-C204L-M20-N UCPSS-T204L-M20-N 20mm 1.22 0.12 0.43 0.67 1.12 M6x.75 1.31 0.63 3.58 4.05 5.00 0.72 0.30 1.45 2.07 2.15 2.64 1640 1100
1400
0.68
UCPSS-C205L-M25-N UCPSS-T205L-M25-N 25mm 1.38 0.12 0.43 0.67 1.34 M6x.75 1.44 0.63 3.82 4.29 5.31 0.78 0.30 1.59 2.15 2.22 2.85 1820 1300
1770
0.86
UCPSS-C206L-M30-N UCPSS-T206L-M30-N 30mm 1.61 0.18 0.51 0.87 1.57 M6x.75 1.69 0.87 4.37 5.08 6.14 0.87 0.35 1.86
2470
1.15
UCPSS-C207L-M35-N UCPSS-T207L-M35-N 35mm 1.77 0.12 0.51 0.87 1.84 M6x.75 1.87 0.85 4.61 5.31 6.45 1.00 0.38 2.00 2.62 2.70 3.74 3300 2560
2700
1.59
UCPSS-C208L-M40-N UCPSS-T208L-M40-N 40mm 1.89 0.16 0.51 0.87 2.07 M8x1.0 1.94 0.85 5.08 5.79 7.05 1.26 0.43 2.05 2.62 2.70 3.94 3780 3010
2800
1.92
2.5
For the full range of bearings, see the System Plast Bearing Line catalog.
161
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
UCPA
Mounted Bearings
and Accessories
Tapped Base
Corrosion resistant housings are engineered to match
the load capacity and speed requirements of standard
bearing inserts. Self aligning and pre-lubricated bearing
inserts allows for a low maintenance and trouble-free
operation that is great for use in the food, beverage and
pharmaceutical industry.
Chrome Steel
Stainless Steel
OR
B C (UNC) D
H1
UCPA-204-M20
3/8 1.12 0.21 M6x.75 1.31 0.63 2.00 2.75 0.72 0.30 1.35 1.93 2.01 2.56
2210
1480
1460
0.66
50013 50013.APE
UCPA-205-M25
3/8 1.33 0.21 M6x.75 1.44 0.63 2.00 2.95 0.78 0.30 1.49 2.12 2.20 2.83
2430
1770
1770
0.81
50009 50009.APE
UCPA-206-M30
30mm 1.57 0.79 7/16 1.57 0.23 M6x.75 1.69 0.94 3.00 3.88 0.87 0.35 1.66 2.32 2.40 3.35
3370
2540
2470
1.10
50010 50010.APE
3/8 1.12 0.21 M6x.75 1.31 0.63 2.00 2.75 0.72 0.30 1.35 1.93 2.01 2.56
1640
1100
1460
0.66
50013 50013.APE
3/8 1.33 0.21 M6x.75 1.44 0.63 2.00 2.95 0.78 0.30 1.49 2.12 2.20 2.83
1820
1300
1770
0.81
50009 50009.APE
UCPASS-206-M30 30mm 1.57 0.79 7/16 1.57 0.23 M6x.75 1.69 0.94 3.00 3.88 0.87 0.35 1.66 2.32 2.40 3.35
2530
1890
2470
1.10
50010 50010.APE
For
Stainless Steel
P
CCs!
A
H ed
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered).
Stainless steel bearing insert.
B C (UNC) D
H H1
1.12 0.21 M6x.75 1.31 0.63 2.00 2.75 0.72 0.30 1.35 1.93 2.01 2.56
1640
1100
1460
1.33 0.21 M6x.75 1.44 0.63 2.00 2.95 0.78 0.30 1.49 2.12 2.20 2.83
1820
1300
1770
UCPASS-206-M30-N 30mm 1.57 0.79 7/16 1.57 0.23 M6x.75 1.69 0.94 3.00 3.88 0.87 0.35 1.66 2.32 2.40 3.35
2530
1890
2470
For the full range of bearings, see the System Plast Bearing Line catalog.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
162
UCPA sealed
Capped and Sealed
Tapped Base Bearings
Mounted Bearings
and Accessories
Chrome Steel
Stainless Steel
OR
Materials: Black polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
Yellow polypropylene safety cap. Seal and O-Ring is NBR rubber.
B C (UNC) D
H1
Closed Cap
UCPA-C204-M20
UCPA-T204-M20
20mm 1.26
0.69
3/8
1.12
2.0
2210 1480
1400
UCPA-C205-M25
UCPA-T205-M25
25mm 1.42
0.77
3/8
1.33
2.0
2430 1770
1770
0.86
UCPA-C206-M30
UCPA-T206-M30
30mm 1.57
0.79 7/16
1.57
3.0
3370 2540
2470
1.15
0.66
0.68
0.69
3/8
1.12
2.0
1640 1100
1460
UCPASS-C205-M25
0.77
3/8
1.33
2.0
1820 1300
1770
0.81
UCPASS-C206-M30
0.79 7/16
1.57
3.0
2530 1890
2470
1.10
Stainless Steel
A new antimicrobial material for improved hygiene. Created
through new technology which will help equipment builders
meet the requirements of the USDA and other government
agencies as they relate to the prevention of contamination of
food products and the growth of bacteria.
For
P
CCs!
A
H ed
Ne
Materials: Nolu-Clean white polyamide support housing (polypropylene can be special ordered). Stainless steel bearing insert.
White polypropylene safety cap. Seal and O-Ring is NBR rubber.
B C (UNC) D
H H1
Closed Cap
UCPASS-C204-M20-N
3/8
1.12 0.21 M6x.75 1.31 0.63 2.00 2.75 0.72 0.30 1.35 1.93 2.01 2.56
1640 1100
1460
UCPASS-C205-M25-N
3/8
1.33 0.21 M6x.75 1.44 0.63 2.00 2.95 0.78 0.30 1.49 2.12 2.20 2.83
1820 1300
1770
0.86
UCPASS-C206-M30-N
UCPASS-T206-M30-N 30mm 1.57 0.79 7/16 1.57 0.23 M6x.75 1.69 0.94 3.00 3.88 0.87 0.35 1.66 2.32 2.40 3.35
2530 1890
2470
1.15
0.68
For the full range of bearings, see the System Plast Bearing Line catalog.
163
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
UCF
Ribbed Flange Bearing
N
Mounted Bearings
and Accessories
Safety caps
are available.
Chrome Steel
version with
set screws
Stainless Steel
OR
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
UCF-204-M20
20mm
3.39
1.97
2.05 0.98
2210 1480
2880
0.51
50003 50003.APE
UCF-205-M25
25mm
3.86
1.97
2.05 0.98
2420 1750
2920
0.90
50003 50003.APE
UCF-206-M30
30mm
4.33
2.09
2.17 1.22
3370 2540
2920
1.28
50001 50001.APE
UCF-207-M35
35mm
4.65
2.64
2.76 1.38
4420 3440
2920
1.76
50002 50002.APE
UCF-208-M40
40mm
5.12
2.64
2.72 1.38
5030 4020
2920
1.98
50002 50002.APE
Part Number
20mm
3.39
1.97
2.05 0.98
1640 1100
2880
0.51
50003 50003.APE
UCFSS-205-M25
25mm
3.86
1.97
2.05 0.98
1820 1300
2920
0.90
50003 50003.APE
UCFSS-206-M30
30mm
4.33
2.09
2.17 1.22
2530 1890
2920
1.28
50001 50001.APE
UCFSS-207-M35
35mm
4.65
2.64
2.76 1.38
3300 2560
2920
1.76
50002 50002.APE
UCFSS-208-M40
40mm
5.12
2.64
2.72 1.38
3780 3010
2920
1.98
50002 50002.APE
UCF sealed
Capped and Sealed
Ribbed Flange Bearing
Chrome Steel
closed version
with set screws
Stainless Steel
OR
Through shaft
version with
set screws
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
Closed Cap
UCF-C204-M20
UCF-T204-M20
20mm 3.39
2.48
0.75
0.72
0.30
1.31
1.97
2.05
0.98
2210
1480
2880
0.61
UCF-C205-M25
UCF-T205-M25
25mm 3.86
2.75
0.75
0.78
0.30
1.37
1.97
2.05
0.98
2420
1750
2920
0.93
UCF-C206-M30
UCF-T206-M30
30mm 4.33
3.27
0.98
0.87
0.35
1.58
2.09
2.17
1.22
3370
2540
2920
1.42
UCF-C207-M35
UCF-T207-M35
35mm 4.65
3.62
0.98
1.00
0.38
1.79
2.64
2.76
1.38
4420
3440
2920
1.93
UCF-C208-M40
UCF-T208-M40
40mm 5.12
4.00
0.98
1.18
0.43
1.97
2.64
2.72
1.38
5030
4020
2920
2.16
UCFSS-C204-M20 UCFSS-T204-M20
20mm 3.39
2.48
0.75
0.72
0.30
1.31
1.97
2.05
0.98
1640
1100
2880
0.61
UCFSS-C205-M25 UCFSS-T205-M25
25mm 3.86
2.75
0.75
0.78
0.30
1.37
1.97
2.05
0.98
1820
1300
2920
0.93
UCFSS-C206-M30 UCFSS-T206-M30
30mm 4.33
3.27
0.98
0.87
0.35
1.58
2.09
2.17
1.22
2530
1890
2920
1.42
UCFSS-C207-M35 UCFSS-T207-M35
35mm 4.65
3.62
0.98
1.00
0.38
1.79
2.64
2.76
1.38
3300
2560
2920
1.93
UCFSS-C208-M40 UCFSS-T208-M40
40mm 5.12
4.00
0.98
1.18
0.43
1.97
2.64
2.72
1.38
3780
3010
2920
2.16
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
164
UCFL
G
version with
set screws
Safety caps
are available.
Chrome Steel
Mounted Bearings
and Accessories
Stainless Steel
OR
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
Load Ratings (lbf)
ship
Yellow
dynamic static max radial weight
safety cap
C
Co on housing (lbs) closed through shaft
UCFL-204-M20
20mm 4.72
3.54
0.43 1.12 3.54 M6x.75 0.59 0.75 0.72 0.30 1.31 1.81 1.89 0.98
2210
1480
1690
0.74
50003
50003.APE
UCFL-205-M25
25mm 5.12
3.90
0.43 1.34 3.54 M6x.75 0.59 0.75 0.78 0.30 1.37 1.81 1.89 0.98
2430
1770
1710
0.98
50003
50003.APE
UCFL-206-M30
30mm 5.75
4.61
0.43 1.57 3.86 M6x.75 0.79 0.98 0.87 0.35 1.66 2.64 2.72 1.38
3370
2540
2900
1.21
50002
50002.APE
UCFL-207-M35
35mm 6.26
5.12
0.55 1.84 4.13 M6x.75 0.79 0.98 1.00 0.38 1.79 2.64 2.72 1.38
4430
3440
3000
1.70
50002
50002.APE
20mm 4.72
3.54
0.43 1.12 3.54 M6x.75 0.59 0.75 0.72 0.30 1.31 1.81 1.89 0.98
1640
1100
1690
0.74
50003
50003.APE
UCFLSS-205-M25
25mm 5.12
3.90
0.43 1.34 3.54 M6x.75 0.59 0.75 0.78 0.30 1.37 1.81 1.89 0.98
1820
1300
1710
0.98
50003
50003.APE
UCFLSS-206-M30
30mm 5.75
4.61
0.43 1.57 3.86 M6x.75 0.79 0.98 0.87 0.35 1.66 2.64 2.72 1.38
2530
1890
2900
1.21
50002
50002.APE
UCFLSS-207-M35
35mm 6.26
5.12
0.55 1.84 4.13 M6x.75 0.79 0.98 1.00 0.38 1.79 2.64 2.72 1.38
3300
2560
3000
1.70
50002
50002.APE
UCFL sealed
Capped and Sealed
Ribbed Flange Bearing
Chrome Steel
closed version
with set screws
Stainless Steel
OR
Through shaft
version with
set screws
Materials: Black polyamide support housing (polypropylene can be special ordered). Chrome steel or stainless steel bearing insert.
Closes Cap
UCFL-C204-M20
UCFL-T204-M20
20mm 4.72
1.89 0.98
2210 1480
1690
0.90
UCFL-C205-M25
UCFL-T205-M25
25mm 5.12
1.89 0.98
2430 1770
1710
1.14
UCFL-C206-M30
UCFL-T206-M30
30mm 5.75
2.72 1.38
3370 2540
2900
1.38
UCFL-C207-M35
UCFL-T207-M35
35mm 6.26
2.72 1.38
4430 3440
3000
1.76
UCFLSS-T204-M20
20mm 4.72
1.89 0.98
1640 1100
1690
0.90
UCFLSS-C205-M25
UCFLSS-T205-M25
25mm 5.12
1.89 0.98
1820 1300
1710
1.14
UCFLSS-C206-M30
UCFLSS-T206-M30
30mm 5.75
2.72 1.38
2530 1890
2900
1.38
UCFLSS-C207-M35
UCFLSS-T207-M35
35mm 6.26
2.72 1.38
3300 2560
3000
1.76
165
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
LifeGard Bearings
Mounted Bearings
and Accessories
3/4" Shafts
204 Series Insert
2 Hole Flange Bearing
F
dia or 3
. s /4"
ha
fts
1.61
1.37*
2.44
4.56
3.54
3/4"
dia.
.45
*1.10 for UHMW bearing insert
Standard
Part Number
LG-2FPA-12
LG-2FPA-12-NS
Solid Housing
Part Number
Ball bearing
insert
LGS-2FPA-12
Stainless ball
bearing insert
Nolu-S UHMW*
bearing insert
LGS-2FPA-12-NS
.70
1.69
Housing
color/material
Max
load (lbs.)
Black Polyamide
1170
Black Polyamide
400
CS
Closed Cover
with O-Ring
Materials: Polypropylene
Part Number
LG-C-12
B
Back
Shaft Seal
Materials: Polypropylene
Color
Shaft
Part Number
Color
Shaft
Orange
3/4"
LG-CS-12
Orange
3/4"
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
166
Double
Lip
Part Number
LG-B-12
Shaft
3/4"
2.80
F
. s or 1"
ha
fts
dia
4.90
1"
dia.
3.90
.45
.79
LG-2FPA-16
LG-2FPA-16-NS
Solid Housing
Part Number
Ball bearing
insert
LGS-2FPA-16
LGS-2FPA-16S
Stainless ball
bearing insert
1.79
Nolu-S UHMW*
bearing insert
LGS-2FPA-16-NS
Housing
color/material
Max
load (lbs.)
Black Polyamide
Black Polyamide
1320
1320
Black Polyamide
500
1.95
1.60*
3.31
1-3/16" Shafts
206 Series Insert
2 Hole Flange Bearing
Fo
dia r 1-3
. s /16
ha
"
fts
5.56
1-3/16"
dia.
4.59
.45
.89
LG-2FPA-19
LG-2FPA-19-NS
Solid Housing
Part Number
Ball bearing
insert
LGS-2FPA-19
Nolu-S UHMW*
bearing insert
LGS-2FPA-19-NS
2.04
Housing
color/material
Max
load (lbs.)
Black Polyamide
1710
Black Polyamide
700
CS
Closed Cover
with O-Ring
Materials: Polypropylene
B
Back
Shaft Seal
Materials: Polypropylene
Double
Lip
Part Number
Color
Shaft
Part Number
Color
Shaft
Part Number
Shaft
LG-C-16
LG-C-19/20
Orange
Orange
1"
1-3/16"
LG-CS-16
LG-CS-19
Orange
Orange
1"
1-3/16"
LG-B-16
LG-B-19
1"
1-3/16"
Mounted Bearings
and Accessories
1" Shafts
3.31
1-1/4" Shafts
207 Series Insert
2 Hole Flange Bearing
Fo
dia r 1-1
. s /4"
ha
fts
5.56
1-1/4"
dia.
Mounted Bearings
and Accessories
4.59
.45
.89
LG-2FPA-20
LG-2FPA-20-NS
Solid Housing
Part Number
Ball bearing
insert
LGS-2FPA-20
LGS-2FPA-20S
Stainless ball
bearing insert
2.04
Nolu-S UHMW*
bearing insert
LGS-2FPA-20-NS
Housing
color/material
Max
load (lbs.)
Black Polyamide
Black Polyamide
1710
1710
Black Polyamide
700
3.00
1" Shafts
1.54
.40
F
. s or 1"
ha
fts
dia
1"
dia.
3.00
1.44
.50
2.00
3/8-16 threaded insert
Solid Housing
Part Number
Ball bearing
insert
LGS-2TPA-16
LGS-2TPA-16S
Stainless ball
bearing insert
Nolu-S UHMW*
bearing insert
LGS-2TPA-16-NS
.65
1.30
Housing
color/material
Max
load (lbs.)
Black Polyamide
Black Polyamide
1736
1736
Black Polyamide
500
CS
Closed Cover
with O-Ring
Materials: Polypropylene
B
Back
Shaft
Seal
Materials: Polypropylene
TB
Back Shaft
Seal and
Retaining Ring
Double
Lip
Part Number
Color
Shaft
Part Number
Color
Shaft
Part Number
Shaft
Part Number
Shaft
LG-C-16
LG-C-19/20
Orange
Orange
1"
1-1/4"
LG-CS-16
LG-CS-20
Orange
Orange
1"
1-1/4"
LG-B-20
1-1/4"
LG-TB-16
1"
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
168
F
. s or 1"
ha
fts
dia
3.86
1"
dia.
2.76
.77
2.76
3.86
Standard
Part Number
LG-4FPA-16
LG-4FPA-16-NS
Solid Housing
Part Number
Ball bearing
insert
LGS-4FPA-16
LGS-4FPA-16S
Stainless ball
bearing insert
1.95
Nolu-S UHMW*
bearing insert
LGS-4FPA-16-NS
Max
load (lbs.)
Black Polyamide
Black Polyamide
2864
2864
Black Polyamide
500
Fo
dia r 1-3
. s /16
ha
"
fts
4.33
1-3/16"
dia.
3.27
.87
3.27
4.33
Standard
Part Number
LG-4FPA-19
LG-4FPA-19-NS
2.09
1.70*
.45
1-3/16" Shafts
Housing
color/material
Solid Housing
Part Number
Ball bearing
insert
LGS-4FPA-19
2.17
Nolu-S UHMW*
bearing insert
LGS-4FPA-19-NS
Housing
color/material
Max
load (lbs.)
Black Polyamide
3640
Black Polyamide
700
CS
Closed Cover
with O-Ring
Materials: Polypropylene
B
Back
Shaft Seal
Materials: Polypropylene
Double
Lip
Part Number
Color
Shaft
Part Number
Color
Shaft
Part Number
Shaft
LG-C-16
LG-C-19/20
Orange
Orange
1"
1-3/16"
LG-CS-16
LG-CS-19
Orange
Orange
1"
1-3/16"
LG-B-16
LG-B-19
1"
1-3/16"
169
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Mounted Bearings
and Accessories
1" Shafts
1.87
1.43*
.45
1-1/4" Shafts
207 Series Insert
4 Hole Flange Bearing
Fo
dia r 1-1
. s /4"
ha
fts
4.33
1-1/4"
dia.
3.27
Mounted Bearings
and Accessories
2.09
1.7*
.87
3.27
4.33
Standard
Part Number
LG-4FPA-20
LG-4FPA-20-NS
Solid Housing
Part Number
Ball bearing
insert
LGS-4FPA-20
LGS-4FPA-20S
Stainless ball
bearing insert
2.17
Nolu-S UHMW*
bearing insert
LGS-4FPA-20-NS
Max
load (lbs.)
Black Polyamide
Black Polyamide
3640
3640
Black Polyamide
700
2.47
2.04*
.45
1-1/2" Shafts
Housing
color/material
Fo
dia r 1-1
.s
ha /2"
fts
4.40
1-1/2"
dia.
3.27
Bolt pa
matche ttern
s 1-1
housing /4"
!
3.27
4.40
Standard
Part Number
LG-4FPAC-24
LG-4FPAC-24-NS
Solid Housing
Part Number
Ball bearing
insert
LGS-4FPAC-24
1.13
2.56
Nolu-S UHMW
bearing insert
LGS-4FPAC-24-NS
Housing
color/material
Max
load (lbs.)
Black Polyamide
3640
Black Polyamide
700
CS
Closed Cover
with O-Ring
Materials: Polypropylene
B
Back
Shaft Seal
Materials: Polypropylene
Double
Lip
Part Number
Color
Shaft
Part Number
Color
Shaft
Part Number
Shaft
LG-C-19/20
LG-C-24
Orange
Orange
1-1/4"
1-1/2"
LG-CS-20
LG-CS-24
Orange
Orange
1-1/4"
1-1/2"
LG-B-20
LG-B-24
1-1/4"
1-1/2"
Mounted Bearings
Spherical and Self Aligning Bearings
Replaces ball bearing units when there is a lack of adequate lubrication or if the environment
is dirty or corrosive. The standard units are machined from Nolu-S which is extremely abrasion resistant and can continue to function in wet environments. The recommended maximum
static load for Nolu-S Self Aligning Bearings is 500 psi.
Insert Materials
Nolu-S A proprietary alloy of food grade lubricants combined with UHMW. This creates a
material which retains most of the properties of UHMW while significantly reducing
friction. Nolu-S advantages include protection of expensive mating surfaces, lower
noise levels and acceptance for food contact as specified by the FDA and USDA.
UHMW
Housing Materials
Part numbers containing -SS are constructed from stainless steel.
Other housings are stamped from carbon steel sheet and then plated.
Nolu-S self lubricating
bearings are used with
polyamide housings and
LifeGard accessories.
Max rpm
10 rpm
50 rpm
100 rpm
150 rpm
250 rpm
500 rpm
764
573
459
400
500
700
300
400
550
190
240
280
90
110
125
60
75
90
20
20
FD
4-Bolt Side Flange Bearing
Pressed metal flange mounts hold spherical
O.D. bearings made of self-lubricating materials to create bearing units that can operate
in abrasive or corrosive environments. They
can also be submerged in fluids or used to
meet the demands of sanitary environments.
Available housing materials include plated
carbon steel or 304 stainless steel.
G
E
D
Polished
Stainless Steel
E D
UHMW
Part
Number
Nolu-S
Part
Number
Shaft
FDH-8
FDH-10
FDH-12
FDH-14
FDH-16
FEH-12
FEH-13
FEH-14
FEH-15
FEH-16
FEH-17
FEH-18
FEH-19
FEH-20
FFH-16
FFH-18
FFH-19
FFH-20
FFH-22
FFH-23
FFH-24
FFH-16-SS
FFH-18-SS
FFH-19-SS
FFH-20-SS
FFH-22-SS
FFH-23-SS
FFH-24-SS
FDS-8
FDS-10
FDS-12
FDS-14
FDS-16
FES-12
FES-13
FES-14
FES-15
FES-16
FES-17
FES-18
FES-19
FES-20
FFS-16
FFS-18
FFS-19
FFS-20
FFS-22
FFS-23
FFS-24
FFS-16-SS
FFS-18-SS
FFS-19-SS
FFS-20-SS
FFS-22-SS
FFS-23-SS
FFS-24-SS
1/2
5/8
3/4
7/8
1
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
171
not recommended
1-11/16
Ball
Standard
Mounting
1-9/16
2-5/16
Special
Notes
1/8
2" Ball
Standard
Mounting
0.38 dia.
mount hole
1-13/16 3-5/8
2-3/4
0.38 dia.
2-1/2"
Ball
3/16
Heavy
Mounting
mount hole
1-13/16 3-5/8
2-3/4
0.38 dia.
2-1/2"
Ball
3/16
Heavy
Mounting
mount hole
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Mounted Bearings
and Accessories
Spherical Bearings
For use in metal flange or
pillow block housing units.
Available in Nolu-S and
UHMW.
Mounted Bearings
FA
UHMW
Part
Number
Nolu-S
Part
Number
Shaft
FAH-8
FAH-10
FAH-12
FAH-14
FAH-16
FBH-12
FBH-13
FBH-14
FBH-15
FBH-16
FBH-17
FBH-18
FBH-19
FBH-20
FBH-12-SS
FBH-13-SS
FBH-14-SS
FBH-15-SS
FBH-16-SS
FBH-17-SS
FBH-18-SS
FBH-19-SS
FBH-20-SS
FAS-8
FAS-10
FAS-12
FAS-14
FAS-16
FBS-12
FBS-13
FBS-14
FBS-15
FBS-16
FBS-17
FBS-18
FBS-19
FBS-20
FBS-12-SS
FBS-13-SS
FBS-14-SS
FBS-15-SS
FBS-16-SS
FBS-17-SS
FBS-18-SS
FBS-19-SS
FBS-20-SS
1/2
5/8
3/4
7/8
1
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
UHMW
Part
Number
Nolu-S
Part
Number
BBH-8
BBH-10
BBH-12
BBH-14
BBH-16
BEH-8
BEH-10
BEH-12
BEH-14
BEH-16
BCH-12-SS
BCH-13-SS
BCH-14-SS
BCH-15-SS
BCH-16-SS
BCH-17-SS
BCH-18-SS
BCH-19-SS
BCH-20-SS
BFH-12
BFH-13
BFH-14
BFH-15
BFH-16
BFH-17
BFH-18
BFH-19
BFH-20
BKH-16-SS
BKH-18-SS
BKH-19-SS
BKH-20-SS
BKH-22-SS
BKH-23-SS
BKH-24-SS
BBS-8
BBS-10
BBS-12
BBS-14
BBS-16
BES-8
BES-10
BES-12
BES-14
BES-16
BCS-12-SS
BCS-13-SS
BCS-14-SS
BCS-15-SS
BCS-16-SS
BCS-17-SS
BCS-18-SS
BCS-19-SS
BCS-20-SS
BFS-12
BFS-13
BFS-14
BFS-15
BFS-16
BFS-17
BFS-18
BFS-19
BFS-20
BKS-16-SS
BKS-18-SS
BKS-19-SS
BKS-20-SS
BKS-22-SS
BKS-23-SS
BKS-24-SS
1/2
5/8
3/4
7/8
1
1/2
5/8
3/4
7/8
1
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
E D
BB
Pillow Block
Series
BB
BE
BC
BF
BK
1-9/16
Special
Notes
1-11/16
Ball
Standard
Mounting
2" Ball
3-9/32 2-3/4 3/16 Standard
Mounting
0.38 dia.
mount hole
1-9/16
2" Ball
3-9/32 2-3/4 3/16 Standard
Mounting
0.38 dia.
mount hole
Hole Dia.
.33 x .66
.33 x .66
.39 x .62
.39 x .59
.39 x .78
D
F
E
H
Polished
Stainless Steel
Mounted Bearings
and Accessories
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
172
Special
Notes
1-11/16"
Ball
Standard
1-11/16"
Ball
1-1/4 1-13/16 2-7/8 15/16 3-15/16
Heavy
Mounting
2" Ball
Standard
2" Ball
Heavy
Mounting
2-1/2"
Ball
1-3/4 2-11/16 3-7/8 1-11/32 5-1/4
Extra
Heavy
Mounting
A
.44 .5
.31
1.16
BD
.56
UHMW
Part
Number
Nolu-S
Part
Number
BDH-4
BDH-5
BDH-6
BDH-7
BDH-8
BDH-9
BDS-4
BDS-5
BDS-6
BDS-7
BDS-8
BDS-9
1/4
5/16
3/8
7/16
1/2
9/16
UHMW
Part
Number
Nolu-S
Part
Number
Shaft
FMH-4
FMH-5
FMH-6
FMH-7
FMH-8
FMH-9
FMH-10
FMS-4
FMS-5
FMS-6
FMS-7
FMS-8
FMS-9
FMS-10
1/4
5/16
3/8
7/16
1/2
9/16
5/8
1.75
2.31
.50
.31
FM
1.75 2.31 Shaft size
Miniature Side
Flange Bearing
.06
1.25
HD
1"
.5
1-11/16"
1-1/4
2"
1-1/2
OD
ID
2-1/2"
1-3/4
I.D.
UHMW
Part Number
Nolu-S
Part Number
1/4
5/16
3/8
7/16
1/2
9/16
5/8
1/2
5/8
3/4
7/8
1
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
HDX-1604
HDX-1605
HDX-1606
HDX-1607
HDX-1608
HDX-1609
HDX-1610
HDX-2708
HDX-2710
HDX-2712
HDX-2714
HDX-2716
HDX-3212
HDX-3213
HDX-3214
HDX-3215
HDX-3216
HDX-3217
HDX-3218
HDX-3219
HDX-3220
HDX-4016
HDX-4018
HDX-4019
HDX-4020
HDX-4022
HDX-4023
HDX-4024
SDX-1604
SDX-1605
SDX-1606
SDX-1607
SDX-1608
SDX-1609
SDX-1610
SDX-2708
SDX-2710
SDX-2712
SDX-2714
SDX-2716
SDX-3212
SDX-3213
SDX-3214
SDX-3215
SDX-3216
SDX-3217
SDX-3218
SDX-3219
SDX-3220
SDX-4016
SDX-4018
SDX-4019
SDX-4020
SDX-4022
SDX-4023
SDX-4024
Max rpm
10 rpm
50 rpm
100 rpm
150 rpm
250 rpm
500 rpm
764
573
459
400
500
700
300
400
550
190
240
280
90
110
125
60
75
90
20
20
173
not recommended
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Mounted Bearings
and Accessories
Miniature Bearings
Replaceable Sleeve
Protects Shaft
Stainless
steel sleeve
What is Nolu-S?
Polyamide housing
Nolu-S
bearing insert
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Max rpm
10 rpm
50 rpm
100 rpm
150 rpm
250 rpm
500 rpm
764
573
459
400
500
700
300
400
550
190
240
280
90
110
125
60
75
90
20
20
174
not recommended
2SP
A
()
Housing
color
Shaft Dia.
A
LGS-2SP-12-NS
LGS-2SP-12-NS-GR
Black
Gray
3/4
3/4
4.56
4.56
3.54
3.54
2.44
2.44
.79
.79
1.47
1.47
LGS-2SP-16-NS
LGS-2SP-16-NS-GR
Black
Gray
1
1
4.90
4.90
3.90
3.90
2.80
2.80
.79
.79
1.56
1.56
LGS-2SP-20-NS
LGS-2SP-20-NS-GR
Black
Gray
1-1/4
1-1/4
5.56
5.56
4.59
4.59
3.31
3.31
.89
.89
1.67
1.67
Part Number
3/8
E
F
3/8
4SP
Materials: Solid Polyamide bearing housings with Nolu-S bearing and stainless steel sleeve.
A
()
Housing
color
Shaft Dia.
A
LGS-4SP-16-NS
LGS-4SP-16-NS-GR
Black
Gray
1
1
3.86
3.86
2.76
2.76
.89
.89
1.56
1.56
LGS-4SP-20-NS
LGS-4SP-20-NS-GR
Black
Gray
1-1/4
1-1/4
4.33
4.33
3.27
3.27
1.02
1.02
1.67
1.67
Part Number
D
E
3.00
2TSP
for
Materials: Solid Polyamide bearing housings with Nolu-S bearing and stainless steel sleeve.
3.00
1"
shaft
Part Number
1.44
.50
.65
1.30
2.00
3/8-16
threaded insert
LGS-2TSP-16-NS
LGS-2TSP-16-NS-GR
CS
Closed Cover
with O-Ring
Materials: Polypropylene
Housing
color
Shaft Dia.
A
Black
Gray
1
1
B
Back
Shaft Seal
Materials: Polypropylene
Part Number
Color
Shaft
Part Number
LG-C-12
LG-C-12-GR
LG-C-16
LG-C-16-GR
LG-C-20
LG-C-20-GR
Orange
Gray
Orange
Gray
Orange
Gray
3/4"
3/4"
1"
1"
1-1/4"
1-1/4"
LG-CS-12
LG-CS-12-GR
LG-CS-16
LG-CS-16-GR
LG-CS-20
LG-CS-20-GR
Double
Lip
Color
Shaft
Part Number
Shaft
Orange
Gray
Orange
Gray
Orange
Gray
3/4"
3/4"
1"
1"
1-1/4"
1-1/4"
LG-B-12
LG-B-16
LG-B-20
3/4"
1"
1-1/4"
175
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Mounted Bearings
and Accessories
Materials: Solid Polyamide bearing housings with Nolu-S bearing and stainless steel sleeve.
FBS
B
Materials: 304 Stainless steel bearing housings and sleeve with Nolu-S bearing.
A
()
3/8
Part Number
Shaft Dia.
A
FBS-SP-12
FBS-SP-16
3/4
1
4.0
4.0
3.28
3.28
2.75
2.75
.19
.19
1.89
1.89
Mounted Bearings
and Accessories
E
F
3/8
FFS
Materials: 304 Stainless steel bearing housings and sleeve with Nolu-S bearing.
B
C
A
()
Part Number
Shaft Dia.
A
FFS-SP-16
FFS-SP-20
FFS-SP-24
1
1-1/4
1-1/2
3.63
3.63
3.63
2.75
2.75
2.75
.19
.19
.19
2.14
2.14
2.14
BCS
Materials: 304 Stainless steel bearing housings and sleeve with Nolu-S bearing.
A ()
Part Number
Shaft Dia.
A
BCS-SP-12
BCS-SP-16
3/4
1
1.88
1.88
2.06
2.06
3.25
3.25
1.06
1.06
4.56
4.56
C
3/8 x 5/8
D
F
BKS
B
Materials: 304 Stainless steel bearing housings and sleeve with Nolu-S bearing.
Part Number
Shaft Dia.
A
BKS-SP-16
BKS-SP-20
BKS-SP-24
1
1-1/4
1-1/2
2.13
2.13
2.13
2.69
2.69
2.69
3.88
3.88
3.88
1.34
1.34
1.34
5.25
5.25
5.25
Materials: Nolu-S spherical bearing, 304 stainless steel shaft protector sleeve.
Description
LG-SP-34
LG-SP-100
LG-SP-125
Description
FSP-34-B
FSP-100-B
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
176
Guide Rails
and Hardware
Section Overview
Valu Guide Rails Page
Side guide rails
Tee guide rails
Chain guide rails
Lane dividers
Specialty guide rail
PolyGlide
Bending Machine
180
202
14 gauge
stainless steel
Guide Rails
and Hardware
Low friction
UHMW guiding
surface
Stainless Steel.
Valu Guide rail sheaths are typically stainless steel, used
for its excellent resistance to corrosion and long lasting
attractive appearance. 316 stainless steel is available for even
greater corrosion protection. Galvanized steel can be ordered as
an economical alternative to stainless steel.
UHMW
304
Stainless Steel
Density
lb/in3
.034
.283
Tensile Strength
PSI
4,000 - 5,500
70,000
PSI
90,000
29,000,000
.09 -.12
in/in/F
7.2 x 10-5
9.6 x 10-6
160/180
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
178
Rod to Rod
Cross Block
Accessory Holder
with sensor
VG-628
Neck Guide
Rail
VG-SSNG-
Cross
Clamp
Accessory Holder
with reflector
VG-629
VG-628
VG-621Patent No.
6,579,032
Mounting Rod
Flat
Mounting
Bar
Guide Rails
and Hardware
VG-215-
Round
Guide Rail
VG-SSR-
VG-204F-
Molded T-Rod
VG-627-
Heavy Duty
Stainless Steel
Bracket
Rail Clamp for
Rods and Bars
Patent No.
6,427,829 B1
6,591,978
VG-223-
VG-022-01
Adjusting Rod
VG-212-12
Patent No.
6,685,385
Patent No.
6,189,685
6,543,608
6,669,009
Patent No.
6,685,385
179
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rail
Natural White UHMW
Material: UHMW Insert and stainless steel or
galvanized steel sheath, 14 gauge.
TM
.67
Round Rail
General purpose side rail for
minimum container contact.
.67
Length* (ft.)
Stainless
Galvanized
VG-SSR-8
VG-SSR-10
VG-SSR-12
VG-SSR-20
VG-GSR-8
VG-GSR-10
VG-GSR-12
VG-GSR-20
8
10
12
20
VG-SSF-8
VG-SSF-10
VG-SSF-12
VG-SSF-20
VG-GSF-8
VG-GSF-10
VG-GSF-12
VG-GSF-20
8
10
12
20
VG-SSM-8
VG-SSM-10
VG-SSM-12
VG-SSM-20
VG-GSM-8
VG-GSM-10
VG-GSM-12
VG-GSM-20
8
10
12
20
VG-SSWF-8
VG-SSWF-10
VG-SSWF-12
VG-SSWF-20
VG-GSWF-8
VG-GSWF-10
VG-GSWF-12
VG-GSWF-20
8
10
12
20
VG-SSMT-8
VG-SSMT-10
VG-SSMT-12
VG-SSMT-20
VG-GSMT-8
VG-GSMT-10
VG-GSMT-12
VG-GSMT-20
8
10
12
20
F
TM
Guide Rails
and Hardware
Flat Rail
Side rail or wear strip when a
wider surface contact is required.
Can also be used as a chain
guide for #60 roller chain.
Also see page 134.
.67
.46
.67
TM
Modified Rail
.67
.46
.67
WF
TM
.67
1.00
.69
MT
.67
.50
.29
.71
VG-022-01
VG-SSR
PET
Bottles
VG-SSMT
VG-SSWF
VG-JS100-125
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
180
Static
Dissipating
Black
Gray Nolu-S
VG-SSR-B-8
VG-SSR-B-10
VG-SSR-B-12
VG-SSR-B-20
VG-SSR-SD-8
VG-SSR-SD-10
VG-SSR-SD-12
VG-SSR-SD-20
8
10
12
20
VG-SSF-NS-8
VG-SSF-NS-10
VG-SSF-NS-12
VG-SSF-NS-20
VG-SSF-B-8
VG-SSF-B-10
VG-SSF-B-12
VG-SSF-B-20
VG-SSF-SD-8
VG-SSF-SD-10
VG-SSF-SD-12
VG-SSF-SD-20
8
10
12
20
VG-SSM-NS-8
VG-SSM-NS-10
VG-SSM-NS-12
VG-SSM-NS-20
VG-SSM-B-8
VG-SSM-B-10
VG-SSM-B-12
VG-SSM-B-20
VG-SSM-SD-8
VG-SSM-SD-10
VG-SSM-SD-12
VG-SSM-SD-20
8
10
12
20
VG-SSWF-NS-8
VG-SSWF-NS-10
VG-SSWF-NS-12
VG-SSWF-NS-20
VG-SSWF-B-8
VG-SSWF-B-10
VG-SSWF-B-12
VG-SSWF-B-20
VG-SSWF-SD-8
VG-SSWF-SD-10
VG-SSWF-SD-12
VG-SSWF-SD-20
8
10
12
20
VG-SSMT-NS-8
VG-SSMT-NS-10
VG-SSMT-NS-12
VG-SSMT-NS-20
VG-SSMT-B-8
VG-SSMT-B-10
VG-SSMT-B-12
VG-SSMT-B-20
VG-SSMT-SD-8
VG-SSMT-SD-10
VG-SSMT-SD-12
VG-SSMT-SD-20
8
10
12
20
VG-012
VG-SSM
Small
Bottles
VG-SSR
VG-205-
VG-SSMT
VG-JSL075-125
Aluminum Cans
181
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
Length* (ft.)
VG-SSR-NS-8
VG-SSR-NS-10
VG-SSR-NS-12
VG-SSR-NS-20
.75
T-.75
.81
Length* (ft.)
Stainless
Galvanized
VG-SST-.75-8
VG-SST-.75-10
VG-SST-.75-12
VG-SST-.75-20
VG-GST-.75-8
VG-GST-.75-10
VG-GST-.75-12
VG-GST-.75-20
8
10
12
20
VG-SST-1.00-8
VG-SST-1.00-10
VG-SST-1.00-12
VG-SST-1.00-20
VG-GST-1.00-8
VG-GST-1.00-10
VG-GST-1.00-12
VG-GST-1.00-20
8
10
12
20
VG-SST-1.25-8
VG-SST-1.25-10
VG-SST-1.25-12
VG-SST-1.25-20
VG-GST-1.25-8
VG-GST-1.25-10
VG-GST-1.25-12
VG-GST-1.25-20
8
10
12
20
VG-SST-1.60-8
VG-SST-1.60-10
VG-SST-1.60-12
VG-SST-1.60-20
VG-GST-1.60-8
VG-GST-1.60-10
VG-GST-1.60-12
VG-GST-1.60-20
8
10
12
20
VG-SST-2.25-8
VG-SST-2.25-10
VG-SST-2.25-12
VG-SST-2.25-20
VG-GST-2.25-8
VG-GST-2.25-10
VG-GST-2.25-12
VG-GST-2.25-20
8
10
12
20
.67
1.0
T-1.00
.81
Guide Rails
and Hardware
.67
1.25
T-1.25
.81
.67
1.60
.30
.35
T-1.60
.81
.67
T-2.25
2.25
.31
.81
.67
VG-SST-1.25VG-SST-2.25-
See page 192 for selected Tee rails available in Nylatron for applications such as high
conveyor speeds, heavy loads or abrasive conditions. Nylatron is a harder, stronger,
higher temperature rated (up to 200F) material for harsh conveying conditions.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
182
Static
Dissipating
Black
Black UHMW insert and
stainless steel sheath, 14 gauge.
VG-SST-.75-B-8
VG-SST-.75-B-10
VG-SST-.75-B-12
VG-SST-.75-B-20
VG-SST-.75-SD-8
VG-SST-.75-SD-10
VG-SST-.75-SD-12
VG-SST-.75-SD-20
8
10
12
20
VG-SST-1.00-NS-8
VG-SST-1.00-NS-10
VG-SST-1.00-NS-12
VG-SST-1.00-NS-20
VG-SST-1.00-B-8
VG-SST-1.00-B-10
VG-SST-1.00-B-12
VG-SST-1.00-B-20
VG-SST-1.00-SD-8
VG-SST-1.00-SD-10
VG-SST-1.00-SD-12
VG-SST-1.00-SD-20
8
10
12
20
VG-SST-1.25-NS-8
VG-SST-1.25-NS-10
VG-SST-1.25-NS-12
VG-SST-1.25-NS-20
VG-SST-1.25-B-8
VG-SST-1.25-B-10
VG-SST-1.25-B-12
VG-SST-1.25-B-20
VG-SST-1.25-SD-8
VG-SST-1.25-SD-10
VG-SST-1.25-SD-12
VG-SST-1.25-SD-20
8
10
12
20
VG-SST-1.60-NS-8
VG-SST-1.60-NS-10
VG-SST-1.60-NS-12
VG-SST-1.60-NS-20
VG-SST-1.60-B-8
VG-SST-1.60-B-10
VG-SST-1.60-B-12
VG-SST-1.60-B-20
VG-SST-1.60-SD-8
VG-SST-1.60-SD-10
VG-SST-1.60-SD-12
VG-SST-1.60-SD-20
8
10
12
20
VG-SST-2.25-NS-8
VG-SST-2.25-NS-10
VG-SST-2.25-NS-12
VG-SST-2.25-NS-20
VG-SST-2.25-B-8
VG-SST-2.25-B-10
VG-SST-2.25-B-12
VG-SST-2.25-B-20
VG-SST-2.25-SD-8
VG-SST-2.25-SD-10
VG-SST-2.25-SD-12
VG-SST-2.25-SD-20
8
10
12
20
Important Note:
When Valu Guide
Rail is used as
a wear strip, the
UHMW insert
should be fastened
to the metal sheath
at the leading end of the rail. Using a sheet metal screw
through the back of the sheath or a heavy wire pin from the
side should be adequate. This will prevent the insert from
sliding within the sheath in the event the chain accidentally
catches on a leading edge. This also allows for thermal
expansion and contraction of the UHMW insert.
VG-SST-1.70-
183
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
Length* (ft.)
VG-SST-.75-NS-8
VG-SST-.75-NS-10
VG-SST-.75-NS-12
VG-SST-.75-NS-20
T-1.70
.12
.12
.31
Ribbed Tee
Used as wear strip and
support assembly for
multi-lane 3 in. slat
top chain.
.81
.38
Galvanized
VG-SST-1.70-8
VG-SST-1.70-10
VG-SST-1.70-12
VG-SST-1.70-20
VG-GST-1.70-8
VG-GST-1.70-10
VG-GST-1.70-12
VG-GST-1.70-20
8
10
12
20
VG-SSLT-1.0x.38-8
VG-SSLT-1.0x.38-10
VG-SSLT-1.0x.38-12
VG-SSLT-1.0x.38-20
VG-GSLT-1.0x.38-8
VG-GSLT-1.0x.38-10
VG-GSLT-1.0x.38-12
VG-GSLT-1.0x.38-20
8
10
12
20
VG-SSNG-8
VG-SSNG-10
VG-SSNG-12
VG-SSNG-20
VG-GSNG-8
VG-GSNG-10
VG-GSNG-12
VG-GSNG-20
8
10
12
20
VG-SSTG-02-8
VG-SSTG-02-10
VG-SSTG-02-12
VG-SSTG-02-20
VG-GSTG-02-8
VG-GSTG-02-10
VG-GSTG-02-12
VG-GSTG-02-20
8
10
12
20
.67
LT
1.25
1.0
.38
Ell Tee
Guide Rails
and Hardware
Length* (ft.)
Stainless
1.21
.81
.67
NG
.37
Neck Guide
.67
.13
.87
1.19
TG
.60
1.06
.67
Carry Strand
4.5
LF882TAB-K4 Chain
VG-SSTG-02
Tab Chain Guide Rail
Shown (4) places
4.125 cL to cL
VG-018-01 Heavy Duty Clip
Shown (4) places
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Return Strand
184
Static
Dissipating
Black
Black UHMW insert and
stainless steel sheath, 14 gauge.
VG-SST-1.70-B-8
VG-SST-1.70-B-10
VG-SST-1.70-B-12
VG-SST-1.70-B-20
VG-SST-1.70-SD-8
VG-SST-1.70-SD-10
VG-SST-1.70-SD-12
VG-SST-1.70-SD-20
8
10
12
20
VG-SSLT-1.0x.38-NS-8
VG-SSLT-1.0x.38-NS-10
VG-SSLT-1.0x.38-NS-12
VG-SSLT-1.0x.38-NS-20
VG-SSLT-1.0x.38-B-8
VG-SSLT-1.0x.38-B-10
VG-SSLT-1.0x.38-B-12
VG-SSLT-1.0x.38-B-20
VG-SSLT-1.0x.38-SD-8
VG-SSLT-1.0x.38-SD-10
VG-SSLT-1.0x.38-SD-12
VG-SSLT-1.0x.38-SD-20
8
10
12
20
VG-SSNG-NS-8
VG-SSNG-NS-10
VG-SSNG-NS-12
VG-SSNG-NS-20
VG-SSNG-B-8
VG-SSNG-B-10
VG-SSNG-B-12
VG-SSNG-B-20
VG-SSNG-SD-8
VG-SSNG-SD-10
VG-SSNG-SD-12
VG-SSNG-SD-20
8
10
12
20
VG-SSTG-02-NS-8
VG-SSTG-02-NS-10
VG-SSTG-02-NS-12
VG-SSTG-02-NS-20
VG-SSTG-02-B-8
VG-SSTG-02-B-10
VG-SSTG-02-B-12
VG-SSTG-02-B-20
VG-SSTG-02-SD-8
VG-SSTG-02-SD-10
VG-SSTG-02-SD-12
VG-SSTG-02-SD-20
8
10
12
20
VG-SSNG
Y
RR
CA
RE
RN
TU
VG-SST-1.25- rail
VG-SSLT-1.0x.38- rail
and
VG-012-01 single rail clamps
Valu Guide rail can accommodate various widths of metal or plastic belts.
185
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
Length* (ft.)
VG-SST-1.70-NS-8
VG-SST-1.70-NS-10
VG-SST-1.70-NS-12
VG-SST-1.70-NS-20
Lane Dividers
.67
.50
Length* (ft.)
Part Number
LD
Lane Divider
VG-SSLD-20-5
VG-SSLD-20-10
VG-SSLD-35-5
VG-SSLD-35-10
VG-SSLD-50-5
VG-SSLD-50-10
.67
.50
5
10
5
10
5
10
Guide Rails
and Hardware
.50
3.50
VG-118-04
2.0
VG-LDSP-15
.75
.75
.75
SSLD-20
SSLD-35
SSLD-50
Drill holes
"C" size x .90 deep
VG-LDNP-
.75
LDNP
Nose Plow
For LD dividers.
Pins included.
H
1.5
H(in.)
Pins
VG-LDNP-20
VG-LDNP-35
VG-LDNP-50
2
3
5
2
3
3
LDSP
Splicing
Pins
1/4
1.5
Length (in.)
VG-LDSP-15
VG-018-01
VG-641T-K-
VG-621-58-58
VG-641-K-
VG-232-X-58 rod
VG-118-04
required
VG-SSLD
and
VG-LDNP
VG-LDA-100
and
VG-LDA-100NP
r
ine
ntaw
Co flo
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
186
r
ine
ntaw
o
C flo
Lane Dividers
.72
5/16
LDA-100
(assembly)
LDA-100
Material: Aluminum.
Part Number
2.62
Length (ft.)
VG-LDA-100-10
VG-LDA-100-20
Lane Divider
Bendable to 40" radius.
10
20
LDP
Material: UHMW.
LDP
(UHMW replacement)
Part Number
VG-LDP-100-10
VG-LDP-100-20
UHMW Cover
Replacement for VG-LDA-100 assembly.
1.0
Length (ft.)
10
20
Material: UHMW.
LDA-100NP
Part Number
VG-LDA-100NP
Nose Plow
For LDA dividers.
LDA-100
2.25
LDA-100NP
2.0
187
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
2.20
#40
.09
.13
Guide Rails
and Hardware
.67
VG-GSCG-#40-8
VG-GSCG-#40-10
VG-GSCG-#40-12
VG-GSCG-#40-20
8
10
12
20
.67
VG-SSCG-#50-8
VG-SSCG-#50-10
VG-SSCG-#50-12
VG-SSCG-#50-20
VG-GSCG-#50-8
VG-GSCG-#50-10
VG-GSCG-#50-12
VG-GSCG-#50-20
8
10
12
20
.67
VG-SSF-8
VG-SSF-10
VG-SSF-12
VG-SSF-20
VG-GSF-8
VG-GSF-10
VG-GSF-12
VG-GSF-20
8
10
12
20
VG-SSCG-#80-8
VG-SSCG-#80-10
VG-SSCG-#80-12
VG-SSCG-#80-20
VG-GSCG-#80-8
VG-GSCG-#80-10
VG-GSCG-#80-12
VG-GSCG-#80-20
8
10
12
20
.34
Chain Guide
Wear strip and guide for #50 ANSI
single roller chains.
Length (ft.)
VG-SSCG-#40-8
VG-SSCG-#40-10
VG-SSCG-#40-12
VG-SSCG-#40-20
.67
#50
.67
#60
.46
Chain Guide
Wear strip and guide for #60 ANSI
single roller chains. Can also be
used as side rail or wear strip when
a wider surface contact is required.
.67
.61
#80
Chain Guide
.81
#40 ANSI
Steel Sheath
Stainless
Galvanized
.28
Chain Guide
#50 ANSI
#60 ANSI
#80 ANSI
See pages
134-135
for more roller
chain guides!
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
188
#40
.09
Steel Sheath
Stainless
1.45
Galvanized
Length (ft.)
VG-SSECG-#40-8
VG-SSECG-#40-10
VG-SSECG-#40-12
VG-SSECG-#40-20
VG-GSECG-#40-8
VG-GSECG-#40-10
VG-GSECG-#40-12
VG-GSECG-#40-20
8
10
12
20
VG-SSECG-#50-8
VG-SSECG-#50-10
VG-SSECG-#50-12
VG-SSECG-#50-20
VG-GSECG-#50-8
VG-GSECG-#50-10
VG-GSECG-#50-12
VG-GSECG-#50-20
8
10
12
20
VG-SSECG-#60-8
VG-SSECG-#60-10
VG-SSECG-#60-12
VG-SSECG-#60-20
VG-GSECG-#60-8
VG-GSECG-#60-10
VG-GSECG-#60-12
VG-GSECG-#60-20
8
10
12
20
.67
#50
.13
1.45
.67
.47
#60
Extended Chain Guide
1.45
*4, 5 and 6 ft. lengths are also available. Other lengths can be
cut to order.
.67
Important Note:
When Valu Guide
Rail is used as a wear
strip, the UHMW insert
should be fastened to the
metal sheath at the leading end of
the rail. Using a sheet metal screw through the back of the sheath
or a heavy wire pin from the side should be adequate. This will
prevent the insert from sliding within the sheath in the event the
chain accidentally catches on a leading edge. This also allows for
thermal expansion and contraction of the UHMW insert.
#40 ANSI
#50 ANSI
#60 ANSI
189
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
.34
RS
TM
.67
.67
FS
Flat Solid Rail
.67
Guide Rails
and Hardware
.46
.67
MS
Where minimum contact is desired
in order to prevent damage during
higher side loading conditions.
TM
.67
.46
.67
WFS
Wide Flat Solid Rail
8
10
12
20
VG-SSFS-8
VG-SSFS-10
VG-SSFS-12
VG-SSFS-20
8
10
12
20
TM
VG-SSRS-8
VG-SSRS-10
VG-SSRS-12
VG-SSRS-20
.67
1.00
VG-SSMS-8
VG-SSMS-10
VG-SSMS-12
VG-SSMS-20
10
12
20
VG-SSWFS-8
VG-SSWFS-10
VG-SSWFS-12
VG-SSWFS-20
8
10
12
20
VG-SSWFS-1.25-8
VG-SSWFS-1.25-10
VG-SSWFS-1.25-12
VG-SSWFS-1.25-20
8
10
12
20
VG-SSTS-1.00-8
VG-SSTS-1.00-10
VG-SSTS-1.00-12
VG-SSTS-1.00-20
8
10
12
20
VG-SSTS-1.25-8
VG-SSTS-1.25-10
VG-SSTS-1.25-12
VG-SSTS-1.25-20
8
10
12
20
VG-SSLTS-1.0x.38-8
VG-SSLTS-1.0x.38-10
VG-SSLTS-1.0x.38-12
VG-SSLTS-1.0x.38-20
8
10
12
20
.69
WFS-1.25
Wide Flat Solid Rail
.67
1.25
TS-1.00
.81
1.25
TS-1.25
.81
LTS
.38
.81
.67
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
190
Gray Nolu-S
Self lubricating Nolu-S UHMW insert and stainless steel
sheath, 14 gauge.
VG-SSRS-SD-8
VG-SSRS-SD-10
VG-SSRS-SD-12
VG-SSRS-SD-20
8
10
12
20
VG-SSFS-NS-8
VG-SSFS-NS-10
VG-SSFS-NS-12
VG-SSFS-NS-20
VG-SSFS-SD-8
VG-SSFS-SD-10
VG-SSFS-SD-12
VG-SSFS-SD-20
8
10
12
20
VG-SSMS-NS-8
VG-SSMS-SD-8
VG-SSMS-NS-10
VG-SSMS-NS-12
VG-SSMS-NS-20
VG-SSMS-SD-10
VG-SSMS-SD-12
VG-SSMS-SD-20
10
12
20
VG-SSWFS-NS-8
VG-SSWFS-NS-10
VG-SSWFS-NS-12
VG-SSWFS-NS-20
VG-SSWFS-SD-8
VG-SSWFS-SD-10
VG-SSWFS-SD-12
VG-SSWFS-SD-20
8
10
12
20
VG-SSWFS-1.25-NS-8
VG-SSWFS-1.25-NS-10
VG-SSWFS-1.25-NS-12
VG-SSWFS-1.25-NS-20
VG-SSWFS-1.25-SD-8
VG-SSWFS-1.25-SD-10
VG-SSWFS-1.25-SD-12
VG-SSWFS-1.25-SD-20
8
10
12
20
VG-SSTS-1.00-NS-8
VG-SSTS-1.00-NS-10
VG-SSTS-1.00-NS-12
VG-SSTS-1.00-NS-20
VG-SSTS-1.00-SD-8
VG-SSTS-1.00-SD-10
VG-SSTS-1.00-SD-12
VG-SSTS-1.00-SD-20
8
10
12
20
VG-SSTS-1.25-NS-8
VG-SSTS-1.25-NS-10
VG-SSTS-1.25-NS-12
VG-SSTS-1.25-NS-20
VG-SSTS-1.25-SD-8
VG-SSTS-1.25-SD-10
VG-SSTS-1.25-SD-12
VG-SSTS-1.25-SD-20
8
10
12
20
VG-SSLTS-1.0x.38-NS-8
VG-SSLTS-1.0x.38-NS-10
VG-SSLTS-1.0x.38-NS-12
VG-SSLTS-1.0x.38-NS-20
VG-SSLTS-1.0x.38-SD-8
VG-SSLTS-1.0x.38-SD-10
VG-SSLTS-1.0x.38-SD-12
VG-SSLTS-1.0x.38-SD-20
8
10
12
20
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
Length* (ft.)
VG-SSRS-NS-8
VG-SSRS-NS-10
VG-SSRS-NS-12
VG-SSRS-NS-20
Steel Sheath
Stainless
Galvanized
VG-SST-N-.75-10
.81
VG-GST-N-.75-10
Length (ft.)
10
Guide Rails
and Hardware
.67
1.0
.81
VG-SST-N-1.00-10 VG-GST-N-1.00-10
10
VG-SST-N-1.25-10 VG-GST-N-1.25-10
10
VG-SST-N-1.60-10 VG-GST-N-1.60-10
10
.67
1.25
.81
.67
1.60
.30
.35
.81
.67
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
192
1.25
1.0
.38
1.25
.46
.67
.67
1.21
.81
.67
.81
.67
A
1. Type of belting _____________________________________
B
2. Weight of belting (pounds per square foot) _______________
3. Top load (product weight per square foot) ________________
4. Conveyor width ____________________________________
5. Belt speed (feet per minute) __________________________
C
6. Operating Temperature ______________________________
A ________ B ________ C ________
7. What type of return is planned? Rollers (see pg. 317) Wear Bed
FAX THIS INFORMATION
8. Is this wear bed a: New design
FOR YOUR CUSTOM DESIGN
FAX (866) 447-6587
Replacement (Type: ___________________ )
Guide Rails
and Hardware
Typical carry and return way wear strip configuration for wide plastic or metal belting utilizing Valu Guide Rail.
SUPPORT
BEAM
See Detail 1
VALU GUIDE flat or tee
UHMW inserts, typical
typ.
A
BELT TRAVEL
Support Beam
CONVEYOR FRAME
MEMBER
DETAIL 1
Custom dimensions
furnished by Valu Guide
per information
submitted above.
cL
11/32 hole
for 5/16 bolt
0.75
VG-012-01
or VG-012-SH
Important Note:
When Valu Guide Rail is used as a wear strip, the UHMW insert
should be fastened to the metal sheath at the leading
end of the rail. Using a sheet metal screw through
the back of the sheath or a heavy wire pin from
the side should be adequate. This will prevent
the insert from sliding within the sheath in
the event the chain accidentally catches
on a leading edge. This also allows for
thermal expansion and contraction
of the UHMW insert.
193
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Plastic packaging and PET bottles can generate high levels of static buildup
as they travel along a conveyor. Static Dissipative Rail is more conductive
than natural UHMW and provides static buildup with a pathway to the surrounding conveyor frame where it can dissipate. Conveyor frames may need
to be grounded. Valu Guide's special formulation retains the low friction and
wear characteristics of UHMW while effectively reducing problems caused by
static such as shocks or containers sticking together.
R-SD
TM
.67
.67
VG-SSR-SD-8
VG-SSR-SD-10
VG-SSR-SD-12
VG-SSR-SD-20
8
10
12
20
VG-SSF-SD-8
VG-SSF-SD-10
VG-SSF-SD-12
VG-SSF-SD-20
8
10
12
20
F-SD
TM
Reduces static buildup and discharge. Side rail or wear strip when
a wider surface contact is required.
Can also be used as a chain guide
for #60 roller chain.
WF
T-1.60
T-.75
T-1.00
.46
.67
T-1.25
The Round and Flat rails shown above are representative of the full line of static dissipating
guide rails available from Valu Guide.
All other profile shapes featured in this catalog can be produced as static dissipative.
T-2.25
10
l
-6
-4
-2
10
l
10
l
10
l
104
10
l
106
l
108
l
1010
l
1012
l
1014
l
Metals
Conductors
Plastics
Insulators
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1016
l
194
Steam Chambers
Furnace Discharge
Retorts
Fryers
in Pe
Te Co rform
mp nti
n s
e
to ratu uous
52 res
5F u
p
!
Shrink Tunnels
Pasteurizers
Steam Boxes
F-HT
Steel Sheath
Stainless
Galvanized
Hi-Temp Flat
TM
.67
VG-SSF-HT-4
VG-SSF-HT-5
VG-SSF-HT-8
VG-SSF-HT-10
.49
Length (ft.)
4
5
8
10
Guide Rails
and Hardware
.67
VG-GSF-HT-4
VG-GSF-HT-5
VG-GSF-HT-8
VG-GSF-HT-10
T-HT
Hi-Temp Tee
Where increased temperatures exist,
use as wear strip for wide metal or plastic
belting and slat top chain. Also used as
side rail when a larger container contact
area is required.
TM
.67
1.25
VG-SST-HT-1.25-4 VG-GST-HT-1.25-4
VG-SST-HT-1.25-5 VG-GST-HT-1.25-5
VG-SST-HT-1.25-8 VG-GST-HT-1.25-8
VG-SST-HT-1.25-10 VG-GST-HT-1.25-10
4
5
8
10
.81
Steel Sheath
1500-3000
70,000
3.8
---5
Hi-Temp Material
195
5.5 x 10
.96
.04
---
---
Important Note:
When Valu Guide
Rail is used as
a wear strip, the
UHMW insert
should be fastened
to the metal sheath at the leading end of the rail.
Using a sheet metal screw through the back of
the sheath or a heavy wire pin from the side
should be adequate. This will prevent the insert
from sliding within the sheath in the event the
chain accidentally catches on a leading edge.
This also allows for thermal expansion and
contraction of the UHMW insert.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
SPM
.55
PolyGlide Rail
Economical guide for plastic
containers and conveyor
belting. Can be used with
all standard Valu Guide rail
clips and clamps. VG-PMIinserts required for use with
rail clamps.
.51
.50
Part Number
Length (ft.)
VG-SPM-4
VG-SPM-5
VG-SPM-6
VG-SPM-8
VG-SPM-10
VG-SPM-12
VG-SPM-20
4
5
6
8
10
12
20
PolyGlide
Inserts
VG-011
double rail
clamp
VG-012
single rail
clamp
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
196
PMI-25
Plastic Insert
Material: Santoprene
plastic.
.60
Part Number
.13
.68
VG-PMI-25
1.6
.59
1.62
.47
Part Number
.46
.68
1.87
VG-113-04
VG-PMI-30
Patent No.
6,053,654
VG-SPMPolyGlide Rail
VG-018-
VG-205-B-
PolyGlide
VG-PMI-25
PolyGlide Rail Insert
VG-012-01
VG-PMI-30
197
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
PMI-30
Inside Curve
VG-691A
VG-691B
VG-691A
VG-691B
VG-691B
VG-691A
VG-690
Adjustable Roller
Adjustable Roller
Rail Bender
Supplied with part number VG-RS-01
which includes two VG-691A rollers, two
VG-691B rollers, and two VG-692 rollers.
Part Number
Adjustable Roller
Adjustable Roller
Top View
Side View
39044
Motorized Bender
20.08
13.19
12.69
23.62
Part Number
39044
42.13
29.53
Guide Rails
and Hardware
Each bender is supplied with rollers (roller set part number VG-RS01) to bend Valu Guide round, flat, modified and Tee-rails. Additional
rollers for bending additional rail styles supplied by
Valu Guide are also available. In the event you're not
satisfied with your bend, the bender can be used to
Outside Curve
straighten the pieces for re-bending.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
198
RS-02
VG-691B
VG-691A
VG-693B
VG-RS-01
VG-RS-02
VG-691B (2 ea.)
VG-692 (2 ea.)
Valu Guide round, flat, modified and neck guide profiles
Minimum radius: 3 in.
VG-693B (2 ea.)
VG-691B
Outside Curves
1 roller
2 rollers
VG-691A
VG-692
VG-691B
VG-691B
VG-692
Inside Curves
1 roller
2 rollers
VG-691B
VG-691B
VG-691A
VG-692
VG-A350, VG-A500
Minimum radius: Inside curve: 6 in.
Outside curve: 5 in. Rail can be bent
with cover in place
VG-RS-03
RS-09
VG-692
Outside Curves
1 roller
2 rollers
Inside Curves
1 roller
2 rollers
VG-692
VG-695
VG-695
VG-692
VG-697B
Outside Curves
1 roller
2 rollers
VG-697A
VG-697B
VG-697A
Inside Curves
1 roller
2 rollers
VG-697B
VG-697A
VG-693A
VG-693B
VG-693B
VG-693A
VG-694A
VG-694B
VG-694A
Inside Curves
1 roller
2 rollers
VG-694B
VG-694A
VG-RS-10
VG-694B
VG-ABG2- profile
Minimum radius: 30 inches
Outside Curves
1 roller
2 rollers
VG-694C
VG-694B
VG-694C
Inside Curves
1 roller
2 rollers
VG-694B
VG-694C
RS-11
VG-686A-1.25 SpeedRail
VG-693A
RS-05
VG-RS-05
VG-693B
VG-694B
RS-10
VG-693B
Outside Curves
1 roller
2 rollers
VG-ABG- profile
VG-693A
VG-RS-09
RS-04
VG-RS-04
VG-693A
Inside Curves
1 roller
2 rollers
VG-695
VG-A2520 profile
VG-693B
Outside Curves
1 roller
2 rollers
VG-A600, VG-A225
Minimum radius: Inside curve: 6 in.
Outside curve: 5 in. Rail can be bent
with cover in place
RS-03
Roller Set Part Number
VG-693A
VG-698A
Outside Curves
1 roller
2 rollers
VG-698B
VG-698A
VG-698B
Inside Curves
1 roller
2 rollers
VG-698A
VG-698B
VG-RS-11
VG-691B
VG-SSUT-1.30
Conveyor belt side guide
Minimum radius: 18 inches
199
VG-699-1.3
Outside Curves
1 roller
2 rollers
Inside Curves
1 roller
2 rollers
VG-699-1.3 VG-691B
VG-691B VG-699-1.3
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
RS-01
RS-06
RS-12
VG-RS-06
VG-RS-12
VG-696
VG-A5020 profile
Minimum radius: Inside curve: 8 in.
Outside curve: 7 in. Add UHMW
cover (VG-P5020BC) after bending
VG-692
Outside Curves
1 roller
2 rollers
Inside Curves
1 roller
2 rollers
VG-692
VG-696
VG-696
VG-692
RS-07
Guide Rails
and Hardware
VG-687H-1.4 SpeedRail SB
VG-688H-1.4 SpeedRoll
Minimum radius: 12 inches
VG-698C
Outside Curves
1 roller
2 rollers
VG-698D
VG-RS-13
VG-698D
VG-698C
Inside Curves
1 roller
2 rollers
VG-698C
VG-698D
VG-698E
Outside Curves
Inside Curves
VG-6911C
19506
19508
19506
19508
Outside Curves
2 rollers
Inside Curves
2 rollers
19508
19508
190265 M-Profile
Minimum radius: 18 inches
19509
Roller Set Part Number
VG-6911C
Outside Curves
19508
16450 C-Profile
VG-6911C
Inside Curves
VG-698E
19509
VG-6911A
Inside Curves
1 roller
2 rollers
VG-RS-14
VG-698E
VG-6911B
Outside Curves
1 roller
2 rollers
VG-RS-08
VG-691B VG-699-1.0
RS-14
19508
VG-699-1.0 VG-691B
RS-08
VG-687-1.4 SpeedRail SB
VG-688-1.4 SpeedRoll
VG-699-1.0
Inside Curves
1 roller
2 rollers
RS-13
VG-RS-07
VG-691B
Outside Curves
1 roller
2 rollers
19509
19509
Outside Curves
2 rollers
Inside Curves
2 rollers
19509
19509
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
200
19506
19506
Outside Curves
2 rollers
Inside Curves
2 rollers
19506
19506
730
Material: UHMW.
VG-730-01
T-.75
WF
VG-730-02
VG-730-03
VG-730-04
VG-730-05
1.5
T-1.00
T-1.25
T-1.60
T-2.25
VG-730-06
VG-730-07
VG-730-08
VG-730-09
90
Installed
in sheath
Guide Rails
and Hardware
1.5 R
Valu Guide
Corner Block installed
into two pieces of VG-SSR
guide rail at 90.
Material: UHMW.
Part Number
Length (ft.)
VG-761-10
10
.59
761
.47
Twist Insert
For use in container fittings as
an alternative to metal rods.
Twist Insert is flexible, nonmarking, and noise reducing.
Typically used in both straight
and radiused applications, and
easily adjoins to Valu Guide rail.
Section A - A
013
.39
Insert Sleeve
For use with Twist Inserts.
Allows attachment of Valu
Guide rail clips, clamps, and
connectors such as
VG-012, VG-014H, VG-015,
VG-016 or VG-018.
.47
1.5
201
Part Number
Length (in.)
VG-013-02
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
bolts and square hole versions accept hex or carriage bolts (due
to variations in carriage bolt head diameters, it may be necessary
to put a flat on the bolt head to avoid interference with the clamp).
1.5
.75 1.5
Fastener
VG-012-01
VG-012-01-316
5/16 or M8
5/16 or M8
.75
1.5
.75
1.5
Fastener
VG-012-SH
VG-012-SH-316
5/16 or M8
5/16 or M8
0.35
5/16"
UNC
0.75
Guide Rails
and Hardware
Part Number
Part Number
K (in.)
331016
331018
0.63
1.02
0.51
.75
3.0
Part Number
Fastener
VG-012-03
VG-012-03-316
5/16 or M8
5/16 or M8
.75
3.0
Part Number
1.5
Fastener
VG-012-03-SH
VG-012-03-SH-316
5/16 or M8
5/16 or M8
VG-012-01
VG-012-03
VG-012-01
VG-012-03
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
202
1.5
Double Rail
Clamp
3.75
3.25
2.5
Round hole,
choice of rail
center dimensions.
VG-011-01
VG-011-04
Part Number
(C) Rail
Centers (in.)
Fastener
VG-011-01
VG-011-04
VG-011-03
2.5
3.25
3.75
3/8 or M10
3/8 or M10
3/8 or M10
Part Number
(C) Rail
Centers (in.)
Fastener
2.5
3.25
3.75
5/16 or M8
5/16 or M8
5/16 or M8
VG-011-03
Double
Rail Clamp
VG-011-SH
VG-011-04-SH
VG-011-03-SH
3.75
3.25
2.5
Square hole.
VG-011-SH
VG-011-04-SH
VG-011-03-SH
0.51
1.5
3.39
2.50
5/16"
UNC
Part Number
K (in.)
331020
331022
0.63
1.02
.79
3.0
Part Number
2.5
Fastener
VG-011-WDR
3/8 or M10
.79
3.0
Part Number
Fastener
VG-011-WD
5/16 or M8
2.5
VG-011-01
203
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
.79
1.5
011
1.0
.79
Double Rail
Clamp
Slotted hole.
1.25
Part Number
3.31
VG-011-NS
Fastener
3/8 or M10
.79
Guide Rails
and Hardware
1.5
1.5
Triple Rail
Clamp
Support for guide rail.
Used with tall containers or when large and
small containers run
on the same production line.
2.5
Fastener
VG-011-02
3/8 or M10
VG-011-02-SH
5/16 or M8
2.5
VG-205-A-
VG-011-02
VG-011-02-SH
VG-205-C-
VG-011-NS
VG-205 series
angle brackets
VG-JSL075-125
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
204
Rail Clamps
Material: Reinforced polyamide.
011-01-P
2.15
Part Number
Fastener
VG-011-01-P-38
1.92
3.6
3/8
.35
.41
h
inc
1/2 and s,
For d rod lamp
n
c
5
rou ional 14-21
it
.2
addee pg
s
2.27
1.0
.87
.20
VG-SSR
90
2.5
3.6
VG-011-01-P
(small side)
VG-011-01-P
(large side)
VG-212
Washer recommended
when using 1/2 rod.
VG-252
3/8" thread
VG-252 (1/2)
OR
Part Number
Length (in.)
VG-252-4-38
4
VG-212 Rods: see page 272
VG-232 Rods: see page 272
OR
VG-232 (5/8)
Fastener
3/8
031
Longer nut threads allow
clamp to open while
assembly stays intact!
e,
ec ign!
i
P
ees
On ral D
eg
Int
VG-031-12
1.0
1.35
1.0
5.0
7.0
Includes patented
features. Patent
No. 5,626,221
Part Number
1.0
1.0
205
VG-031-12-35
3.5
VG-031-12-50
VG-031-12-70
5.0
7.0
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
90
022
Rail Clamp
for Rod or Flat Bar
Guide Rails
and Hardware
Part Number
VG-022-01
2.30
1.04
1.30
Patent No.
6,685,385
cL
.50 .26
.32
1/2
VG-204F-
5/16 x 18
Hex Nut &
Set Screw
or
1/8-1/4 x 1
1.10
.34
10 x 32 UNF
Shoulder Nut
.98
204F
Mounting Bar
6.0
2.0
2.0
2.0
1.8
1.8
1.8
4.5
2.0
.42
Accurately positions
sensors and reectors.
Use with VG-022-01 rail
clamp for ideal sensor
mounting and quick
adjustment, above or
below guide rail.
Length (in.)
VG-204F-45-316S
VG-204F-60-316S
VG-204F-75-316S
VG-204F-90-316S
4.5
6.0
7.5
9.0
.7
1.0
Sensor Mount
Part Number
7.5
1.0
612
9.0
.13
Part Number
.86
3.5
5.0
R .50
(both ends)
Length(in.) Sensor(mm)
VG-612-35-12
VG-612-35-18
VG-612-50-12
VG-612-50-18
3.5
3.5
5
5
VG-022
VG-SSR
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
206
12
18
12
18
020
1.76
1.43
Attaches to VG-020-R
adjusting rods for use as a
connector to hold
and easily adjust
Valu Guide rail.
.96
Part Number
VG-020-01
#10-32
020-R
.13
Adjusting Rods
for Rod Ends
.50
(1/2")
.45
.50
.54
4,6,8,10,12
.13
.63
(5/8")
.45
.50
020J
Jointed Adjusting
Rods: Grooved
3,5,7,9,11,15
VG-020-R3
VG-020-R5
VG-020-R7
VG-020-R9
VG-020-R11
VG-020-R15
3
5
7
9
11
15
1/2
1/2
1/2
1/2
1/2
1/2
VG-020-R4
VG-020-R6
VG-020-R8
VG-020-R10
VG-020-R12
4
6
8
10
12
5/8
5/8
5/8
5/8
5/8
Length
.50
.54
.50 (1/2")
or
.63 (5/8")
.63
.13
207
1/8 stainless
steel dowel
VG-020J-R3
VG-020J-R4
VG-020J-R5
VG-020J-R6
VG-020J-R7
VG-020J-R8
VG-020J-R9
VG-020J-R10
3
4
5
6
7
8
9
10
1/2
5/8
1/2
5/8
1/2
5/8
1/2
5/8
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
3316
Swivel Clamp
4.45
Part Number
1.18
1.38
60
(in.)
(clamp only)
1/2
5/8
1.06
1.02
0.69
33167
33168A
33168B
Guide Rails
and Hardware
60
33924
Adjusting Rod
for Rod End
0.28
0.30
Length
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
0.47
208
0.30
33924
33928
5
5
1/2
5/8
Rod to Rod
Cross Block
Accessory Holder
with sensor
VG-628
Neck Guide
Rail
VG-SSNG-
Cross
Clamp
Accessory Holder
with reflector
VG-629
VG-628
VG-621Patent No.
6,579,032
Mounting Rod
Flat
Mounting
Bar
Guide Rails
and Hardware
VG-215-
Round
Guide Rail
VG-SSR-
VG-204F-
Molded T-Rod
VG-627-
Heavy Duty
Stainless Steel
Bracket
Rail Clamp for
Rods and Bars
Patent No.
6,427,829 B1
6,591,978
VG-223-
VG-022-01
Adjusting Rod
VG-212-12
Patent No.
6,685,385
Patent No.
6,189,685
6,543,608
6,669,009
Patent No.
6,685,385
209
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
013
Splice Sleeve
Part Number
113-01
Guide Rails
and Hardware
Length (in.)
VG-013-01
VG-013-01-316
VG-013-03
VG-013-04
VG-013-06
2
2
3
4
6
1.25
.50
.34 sq.
Part Number
Fastener
VG-113-01
5/16
1.25
5/16-18
113
Patent No.
6,250, 841
VG-113-03
VG-113-04
VG-113-06
VG-113-08
VG-113-08G
.57
3, 4, 6, 8
1.07
Jaws compress
on rail
VG-113-03
Gap
3
4
6
8
8
.09
Before
tightening
Length (in.)
.63
After
tightening
VG-113-04
VG-113-06
ing
VG-113-08
il
ra
VG-113-08G
113S
Sliding Splice Clamp
Used in situations such as radius
turns where frequent adjustments
are made. Allows one rail to slide
within the clamp while the other
remains fixed. With shim in place,
clamp positions rail but allows
sliding for adjustments up to
2 inches.
VG-SSWF
Patent No.
6,053, 654
ed
fix
sli
en
tm
jus
ing
ws
llo
a
VG-113S-08G
shown
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
e
fix
210
il
ra
t(
Shim
il
ra
sli
ad
in.
ax
sl
ng
idi
il
ra
VG-113S-06
VG-113S-08
VG-113S-08G Gap
Length (in.)
6
8
8
3, 4, 6, 8
.85
.41
.18
118
.64
Before
tightening
Part Number
5/16-18
Lock nut
Jaws compress
on rail
After
tightening
Length (in.)
VG-118-03
VG-118-04
VG-118-04K
Knob
VG-118-06
VG-118-06K
Knob
VG-118-08
VG-118-08G
Gap
VG-118M-04 M8 thread
3
4
4
6
6
8
8
4
VG-SSR
Lock nut
VG-SSR-
VG-118-
VG-205-
1.50
2.50
1.50
VG-118-03
2.50
VG-118-04
1.50
VG-118-06
VG-118-04K
1.50
1.50
VG-118-06K
VG-118-08
Patent No.
6,287, 045
VG-118-08G
VG-118
Bridges up to
2" gaps in rails
118B
Guide Rail
Bridge Kit
Provides continuity
in side guide surface
by bridging a gap that
is sometimes created
when adjusting rails
for larger container sizes.
Bridge
Plate
VG-018-01
VG-SST.75
(special
chamfered)
.34
Kit includes:
1 - VG-118
Bridge Plate
2 - VG-018-01
6" piece chamfered rail
Hardware
Part Number
VG-118B-06R
VG-118B-06T
VG-118B-08R
VG-118B-08T
2.25
1.5
12 ga.
.38
.38
117-2
.88
1.88
.25
Universal Mounting
and Splice Plates
Rail
Length(in.)
VG-SSR
VG-SST.75
VG-SSR
VG-SST.75
6
6
8
8
.34
VG-117-2-2
2.25
1.5
.38
11 ga.
.38
.75
.34
1.0
4.25
1.0
Part Number
VG-117-2-2
VG-117-2-4
1.88
4.25
2.25
2.25
.75
.34
VG-117-2-4
211
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
VG-118-03
Rail Clips
Material: 13 ga. stainless steel.
018
Part Number
VG-018-01
VG-018-02
VG-018-03
VG-018-04
VG-018M-01
VG-018M-02
VG-018M-03
VG-018M-04
Thread
.675
.75
1.0
1.25
14mm
20mm
25.5mm
30mm
5/16
5/16
5/16
5/16
M8
M8
M8
M8
.85
Guide Rails
and Hardware
1.0
VG-018
.85
5/16 or M8 thread
(nut and washer
not included).
VG-205-B-
VG-SSR
VG-212-8-516
Before tightening
After
tightening
Jaws compress
on rail
VG-018-01
Flat washer recommended
when used with a 1/2 dia. rod.
014H
Part Number
VG-014H-01
VG-014H-02
Thread
.60
.85
1/4
1/4
VG-014H
Rail Clips
.82
.80
.80
VG-245-J
angle bracket
.54
1/4 thread
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
212
Rail Clips
1.0
.89
015
.23
Part Number
VG-015-01
VG-015-02
VG-015-03
VG-015-04
VG-015M-01
5/16 or M8 thread
VG-015M-02
(nut and washer
(not included).
VG-015M-03
VG-015M-04
Patent No.
5,803,687
.64
.76
1.01
1.26
16mm
19mm
25.5mm
32mm
5/16
5/16
5/16
5/16
M8
M8
M8
M8
Guide Rails
and Hardware
VG-015M
VG-205-BVG-SSR
Before tightening
.81
.71
016
1.1
Aluminum
Compression Clip
.67
When tightened
VG-016-01
VG-016-03
5/16
hex head
bolt
.32
5/16
5/16
See Related
Products
VG-205-BVG-SSR
VG-016-01 Rail Clips
017
1.08
.88
5.0
.12
Backing Plate
.34 thru
(for 5/16 bolt)
016
.12
T
LIGH Y
T
DU
VG-017
Backing
Plate
VG-212-5/16
Part Number
VG-017
wrench flats
1.08
.78
.98
Plastic
Compression Clip
1.13
Material: Acetal.
1.14
.31 thru
(for 5/16 hex head bolt)
.67
Part Number
5/16 hex
head bolt
VG-016-02
rect. bar upright
Fastener
5/16
Not recommended
for use with adjusting
rods or on wear beds.
213
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
011-01-P
Fastener
VG-011-01-P-38
1.92
3.6
3/8
.35
.41
2.27
1.0
90
Guide Rails
and Hardware
90
021
Rod Clamp
for Rod or Flat Bar
Part Number
VG-021-02
VG-021-03
1/2
3/8
ds
Hol in.
2
1/ od
r
cL
Patent No.
6,685,385
5/16 x 18
Hex Nut &
Set Screw
.90
10 x 32 UNF
Shoulder Nut
2.34
1.06
1.37
.66
.53 .27
VG-S12ROD series
round stainless rod
up to 1/2
or
1/8-1/4 x 1
ds
Hol in.
8
3/ od
r
cL
5/16 x 18
Hex Nut &
Set Screw
.82
10 x 32 UNF
Shoulder Nut
2.34
1.06
1.29
VG-021
.58
.53 .27
up to 1/2
or
1/8-1/4 x 1
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
214
032
e,
ec ign!
i
P
ees
On ral D
g
nte
Part Number
VG-032-12-35
VG-032-12-50
VG-032-12-70
3.50
3.5
5.0
7.0
1.0
1.35
.90
5.00
1.0
7.00
019
Material: Acetal clamp with stainless steel and nickel plated brass
fasteners.
1.06
1/2
Rod End
1.0
1.46
1.36
Guide Rails
and Hardware
1/2"
Part Number
#10-32
.66
Valu Guide's selection of holding devices for round rod can be used in
many different applications. Although side guide rail is a common use
for round rod, these versatile clamps can hold and adjust round rod
vertically for additional positioning options.
.79
VG-019-12
VG-S12ROD
VG-032-12-
S12ROD
Steel Rod
VG-032-12-
VG-S12ROD-8
VG-S12ROD-12
VG-253K-S-
Length (ft.)
8
12
215
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Guide Rails
and Hardware
1/4 x 2-1/4
WG1
Wide Guide
3.07
Part Number
Color
Length(ft.)
VG-WG1-10
VG-WG1-BL-10
black
blue
10
10
.65
190
Wide Guide
Clamp
2.77
3.15
Part Number
VG-190
VG-190-38
M10
3/8
2.28
191
Part Number
VG-191-252-4
Wide Guide
Clamp with Rod
4.0
1/2
3/8 thread
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
216
Rod
Length
1/2
Bead and
Roller Guides
Section Overview
Flexible
SpeedRail
& SpeedRoll ... SpeedRail SB ...
Page
221
Page
222
SpeedRoll ...
Page
224
SpeedRail ...
Page
226
BeadRail ...
Page
227
Bead Guide
Accessories
Page
BeadWall
Page
228
Heavy Duty
BeadWall
Page
229
Roller
Combiner
Page
230
231
235
Bead and
Roller Guides
SpeedRail
Eliminates jamming
No friction points or bridging
Increases throughput
Reduces product damage
Excellent for paper, plastic
and metal containers
G
D
E
B
BeadRail
BeadWall
This high density bead pattern is our most popular low friction guiding surface.
The heavy gauge stainless or plated steel channel construction can withstand
signicant side loads. Easy fastening frame slots allow for horizontal and vertical BeadWall applications.
For extreme load conditions, Heavy Duty BeadWall is constructed with larger
diameter beads and thicker stainless steel pins. These modications accommodate large load capacities and allow for bead surfaces up to 10 inches.
G Roller Combiner
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
218
Bead and
Roller Guides
Single module
Several single modules assembled onto a steel support to form one 3 meter (approx. 10 ft.) section
These low noise, long life, bead guides offer quick installation and smooth operation. They are designed for boxes and
containers (glass and plastic bottles, tin and strong aluminum
cans). Excellent for accumulation areas. Can be cut to length.
Flexible Roller
Module
Eliminates jamming
Stainless Steel
Support
219
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Single Filer
Top view of combiner application
for round cans, glass or plastic
bottles using Roller Combiner and
Valu Guide brackets and rods.
Maintaining Orientation
In straights or especially in curved sections,
BeadWall does an excellent job of keeping
packages or containers oriented correctly.
Bead and
Roller Guides
Transfer
Smoothly guides containers
from one conveyor to another,
minimizing tipping and jams.
Gravity Conveyor
Free moving beads or rollers,
supported by steel pins and a
heavy gauge steel channel, create
a durable, low friction guiding surface.
Accumulation Table
The smooth rolling surface of Valu Guide
bead guides and combiners does not allow
packages to create any friction points, which
can cause jamming and possibly unwanted
shutdown of the entire conveyor line.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
220
687FLEX-1.4
Flexible SpeedRail SB
Part Number
.86
1.90
1.44
VG-687FLEX-1.4-02
VG-687FLEX-1.4-03
VG-687FLEX-1.4-04
VG-687FLEX-1.4-05
VG-687FLEX-1.4-06
VG-687FLEX-1.4-07
VG-687FLEX-1.4-08
VG-687FLEX-1.4-09
VG-687FLEX-1.4-10
2
3
4
5
6
7
8
9
10
.49
.56
2.75
18"
.35
thru
1.90
3
3
3
4
4
5
5
6
6
Length
(ft.)
Patent No.
6,516,933
687SP
No. of Bolts
Included*
.95
1.75
1.0
1.0
.42
Bead and
Roller Guides
Part Number
VG-687SP-1.4
688FLEX-1.4
Flexible SpeedRoll
Part Number
1.90
1.45
VG-1568-02
included
Patent No.
6,516,933
.45
.56
687SP
2.75
No. of Bolts
Included*
VG-688FLEX-1.4-02
VG-688FLEX-1.4-03
VG-688FLEX-1.4-04
VG-688FLEX-1.4-05
VG-688FLEX-1.4-06
VG-688FLEX-1.4-07
VG-688FLEX-1.4-08
VG-688FLEX-1.4-09
VG-688FLEX-1.4-10
3
3
3
4
4
5
5
6
6
Length
(ft.)
2
3
4
5
6
7
8
9
10
.35
thru
1.9
.95
1.75
Part Number
18"
1.0
1.0
VG-687SP-1.4
.42
221
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
687 SpeedRail SB
Easy mounting
Great for polywrapped
687-1.4
Part Number
2.15
VG-1568-02
included
(see page 232)
1.44
Patent No.
6,516,933
.49
.49
1.0
.48
to cL
1.16
cL
Bead and
Roller Guides
687NP
Nose Plow for
SpeedRail SB
Lane Divider
containers or PET
On-site bendable
Cut to desired length
No. of Bolts
Included*
Length
(ft.)
3
3
3
4
4
5
5
6
6
2
3
4
5
6
7
8
9
10
VG-687-1.4-02
VG-687-1.4-03
VG-687-1.4-04
VG-687-1.4-05
VG-687-1.4-06
VG-687-1.4-07
VG-687-1.4-08
VG-687-1.4-09
VG-687-1.4-10
24"
.72
1.43 1.90
.256
thru
.95
.09
Part Number
1.07
VG-687NP-1.4
687H-1.4
SpeedRail SB
Low friction beads provide excellent guides for
polywrapped containers or PET bottles.
Smaller beads help guide smaller
containers. Can be cut to length
and bent using special rollers
and the Valu Guide rail
bender. Easy mounting
using VG-1568-02 bolts
(included). Operating
temperature range:
-10F to +180F.
VG-1568-02
included
(see page 232)
Part Number
.86
1.90
1.44
Patent No.
6,516,933
687SP
.49
.56
.35
thru
1.90
.95
1.75
3
3
3
4
4
5
5
6
6
2
3
4
5
6
7
8
9
10
VG-687H-1.4-02
VG-687H-1.4-03
VG-687H-1.4-04
VG-687H-1.4-05
VG-687H-1.4-06
VG-687H-1.4-07
VG-687H-1.4-08
VG-687H-1.4-09
VG-687H-1.4-10
12"
1.0
1.0
Part Number
.42
VG-687SP-1.4
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Length
(ft.)
2.75
No. of Bolts
Included*
222
For Splicing
687 SpeedRail SB
687-3.3
2-Strand SpeedRail SB
Lane Divider
1.16
Part Number
1.44
3.26
3.97
Patent No.
6,516,933
1.44
No. of Bolts
Included*
Length
(ft.)
3
3
3
4
4
5
5
6
6
2
3
4
5
6
7
8
9
10
VG-687-3.3-02
VG-687-3.3-03
VG-687-3.3-04
VG-687-3.3-05
VG-687-3.3-06
VG-687-3.3-07
VG-687-3.3-08
VG-687-3.3-09
VG-687-3.3-10
24"
.49
1.0
2.92
687NP
.48
.23
.72
1.43
.256
thru
1.43
Part Number
Part Number
.09
1.07
VG-687NP-3.3
687H-3.3
687SP
.95
SpeedRail SB
Splicing Pins
For use with:
VG-687-1.4-...
VG-687H-1.4-...
VG-687-3.3-...
VG-687H-3.3-...
2-Strand
SpeedRail SB
VG-687SP
See Related
Products
1.0
.125
.86
3.26
Part Number
3.72
Patent No.
6,516,933
1.44
.49
.56
687SP
3.50
.35
thru
VG-687SP-3.3
Length
(ft.)
3
3
3
4
4
5
5
6
6
2
3
4
5
6
7
8
9
10
3.70
1.8
VG-687H-3.3-02
VG-687H-3.3-03
VG-687H-3.3-04
VG-687H-3.3-05
VG-687H-3.3-06
VG-687H-3.3-07
VG-687H-3.3-08
VG-687H-3.3-09
VG-687H-3.3-10
No. of Bolts
Included*
20"
2.0
1.5
1.0
223
.43
Copyright
2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Bead and
Roller Guides
3.70
.72
688 SpeedRoll
Easy mounting
Great for polywrapped
688-1.4
Part Number
VG-1568-02
included
(see page 232)
Patent No.
6,516,933
2.15
1.44
.45
.06
containers or PET
On-site bendable
Cut to desired length
.47
to cL
cL
1.0
687NP
No. of Bolts
Included*
Length
(ft.)
3
3
3
4
4
5
5
6
6
2
3
4
5
6
7
8
9
10
VG-688-1.4-02
VG-688-1.4-03
VG-688-1.4-04
VG-688-1.4-05
VG-688-1.4-06
VG-688-1.4-07
VG-688-1.4-08
VG-688-1.4-09
VG-688-1.4-10
2.92
Bead and
Roller Guides
.48
.23
.72
1.43 1.90
.256
thru
1.97
.95
.09
Part Number
24"
1.07
VG-687NP-1.4
688H-1.4
Aluminium SpeedRoll
Part Number
.86
1.90
No. of Bolts
Included*
Length
(ft.)
3
3
3
4
4
5
5
6
6
2
3
4
5
6
7
8
9
10
VG-688H-1.4-02
VG-688H-1.4-03
VG-688H-1.4-04
VG-688H-1.4-05
VG-688H-1.4-06
VG-688H-1.4-07
VG-688H-1.4-08
VG-688H-1.4-09
VG-688H-1.4-10
1.45
VG-1568-02
included
(see page 232)
.45
.56
687SP
2.75
.35
thru
1.9
.95
Part Number
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.0
1.0
VG-687SP-1.4
.42
224
12"
688 SpeedRoll
1.10
1.0
688-3.3
2-Strand SpeedRoll
Lane Divider
1.44
3.26
3.97
1.44
.45
1.0
Part Number
No. of Bolts
Included*
Length
(ft.)
3
3
3
4
4
5
5
6
6
2
3
4
5
6
7
8
9
10
VG-688-3.3-02
VG-688-3.3-03
VG-688-3.3-04
VG-688-3.3-05
VG-688-3.3-06
VG-688-3.3-07
VG-688-3.3-08
VG-688-3.3-09
VG-688-3.3-10
24"
Patent No.
6,516,933
2.92
687SP
.48
.23
.72
1.43
.256
thru
3.70
.72
1.97
Part Number
VG-687SP
1.43
SpeedRoll
Splicing Pins
.95
.09
1.07
VG-687NP-3.3
688H-3.3
1.0
2-Strand Aluminum
SpeedRoll
.125
Part Number
1.44
3.26
3.72
1.44
.45
.56
687SP
3.50
Length
(ft.)
3
3
3
4
4
5
5
6
6
2
3
4
5
6
7
8
9
10
VG-688H-3.3-02
VG-688H-3.3-03
VG-688H-3.3-04
VG-688H-3.3-05
VG-688H-3.3-06
VG-688H-3.3-07
VG-688H-3.3-08
VG-688H-3.3-09
VG-688H-3.3-10
.35
thru
3.70
1.8
20"
VG-687SP-3.3
No. of Bolts
Included*
Part Number
Bead and
Roller Guides
687NP
2.0
1.5
1.0
225
Patent No.
6,516,933
.43
Copyright
2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
686 SpeedRail
Material: Aluminum channel, FDA accepted
engineered polymer pins, gray acetal beads.
686A-1.25
SpeedRail
Part Number
VG-686A-1.25-02
VG-686A-1.25-03
VG-686A-1.25-04
VG-686A-1.25-05
VG-686A-1.25-06
VG-686A-1.25-07
VG-686A-1.25-08
VG-686A-1.25-09
VG-686A-1.25-10
.98
.62
No. of Bolts
Included*
Length
(ft.)
3
3
3
4
4
5
5
6
6
2
3
4
5
6
7
8
9
10
1.75
1.28
.62
.57
to cL
cL
.86
For Splicing
686SP-1.25
Bead and
Roller Guides
12"
VG-1568-02
included
(see page 232)
Patent No.
6,516,933
2.75
Flat Washer
recommended
.35
thru
1.75
VG-212 or
VG-232 rod
.88
1.75
1.0
1.15
Part Number
VG-205 bracket
.42
VG-686SP-1.25
686A-3.0
2-Strand SpeedRail
Part Number
VG-686A-3.0-02
VG-686A-3.0-03
VG-686A-3.0-04
VG-686A-3.0-05
VG-686A-3.0-06
VG-686A-3.0-07
VG-686A-3.0-08
VG-686A-3.0-09
VG-686A-3.0-10
.98
.62
1.30
No. of Bolts
Included*
Length
(ft.)
3
3
3
4
4
5
5
6
6
2
3
4
5
6
7
8
9
10
.40
1.30
20"
Patent No.
6,516,933
.86
VG-1568-02
included
(see page 232)
3.50
686SP-3.0
.35
thru
3.4
1.7
Part Number
VG-686SP-3.0
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.5
1.15
226
.42
684 BeadRail
BR-1.5
Aluminum Channel
BeadRail
Part Number
1.95
12"
1.28
5/16"
carriage bolt
5/16
carriage bolt
.19
1.01
2
3
4
5
6
7
8
9
10
lx = .0159 in4
ly = .120 in4
E = 10 x 106 psi
Weight = .46 lb/ft
VG-205-BC
bracket assembly
.29
BR-3
Centroid
3 Inch Aluminum
Channel BeadRail
Y
X
.75
Part Number
Length (ft.)
VG-684BR-3-AB-02
VG-684BR-3-AB-03
VG-684BR-3-AB-04
VG-684BR-3-AB-05
VG-684BR-3-AB-06
VG-684BR-3-AB-07
VG-684BR-3-AB-08
VG-684BR-3-AB-09
VG-684BR-3-AB-10
1.13
.62
2.70
2.46
3.16
5/16" hex bolt
.62
2
3
4
5
6
7
8
9
10
.57
c
to L
cL
1.01
BR-1.5
Part Number
Stainless Steel
Channel BeadRail
Length (ft.)
VG-684BR-1.5-SB-02
VG-684BR-1.5-SB-03
VG-684BR-1.5-SB-04
VG-684BR-1.5-SB-05
VG-684BR-1.5-SB-06
VG-684BR-1.5-SB-07
VG-684BR-1.5-SB-08
VG-684BR-1.5-SB-09
VG-684BR-1.5-SB-10
.62
2
3
4
5
6
7
8
9
10
5/16
carriage bolt
.12
1.13
1.01
VG-684BR-1.5-SB-
1.67
3/16"
.57
steel pins
c
to L
cL
1.59
1.95
1.28
1.5
12"
5/16"
carriage bolt
.19
227
.23
Centroid
.75
Y
X
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Bead and
Roller Guides
1.5
Length (ft.)
VG-684BR-1.5-AB-02
VG-684BR-1.5-AB-03
VG-684BR-1.5-AB-04
VG-684BR-1.5-AB-05
VG-684BR-1.5-AB-06
VG-684BR-1.5-AB-07
VG-684BR-1.5-AB-08
VG-684BR-1.5-AB-09
VG-684BR-1.5-AB-10
684 BeadWall
684
BeadWall
10 ga.
steel channel
(.130)
3/8 carriage
bolt
1.4
2"
.13
1.96
2.69
.62
.19
Bead and
Roller Guides
VG-684-SS-2
VG-684-PL-2
VG-684-SS-3
VG-684-PL-3
2.96
3"
3.66
VG-684-SS-4
VG-684-PL-4
VG-684-SS-6
VG-684-PL-6
3.87
4"
4.61
.62
.12
3/16"
.57
steel pins
c
to L
cL
6"
5.78
6.48
Combiner section
ends (part # VG-681-)
are listed on page 231.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Stainless Channel
Plated Channel
VG-684-SS-2-02
VG-684-SS-2-03
VG-684-SS-2-04
VG-684-SS-2-05
VG-684-SS-2-06
VG-684-SS-2-07
VG-684-SS-2-08
VG-684-SS-2-10
VG-684-PL-2-02
VG-684-PL-2-03
VG-684-PL-2-04
VG-684-PL-2-05
VG-684-PL-2-06
VG-684-PL-2-07
VG-684-PL-2-08
VG-684-PL-2-10
2
3
4
5
6
7
8
10
2
2
2
2
2
2
2
2
VG-684-SS-3-02
VG-684-SS-3-03
VG-684-SS-3-04
VG-684-SS-3-05
VG-684-SS-3-06
VG-684-SS-3-07
VG-684-SS-3-08
VG-684-SS-3-10
VG-684-PL-3-02
VG-684-PL-3-03
VG-684-PL-3-04
VG-684-PL-3-05
VG-684-PL-3-06
VG-684-PL-3-07
VG-684-PL-3-08
VG-684-PL-3-10
2
3
4
5
6
7
8
10
3
3
3
3
3
3
3
3
VG-684-SS-4-02
VG-684-SS-4-03
VG-684-SS-4-04
VG-684-SS-4-05
VG-684-SS-4-06
VG-684-SS-4-07
VG-684-SS-4-08
VG-684-SS-4-10
VG-684-PL-4-02
VG-684-PL-4-03
VG-684-PL-4-04
VG-684-PL-4-05
VG-684-PL-4-06
VG-684-PL-4-07
VG-684-PL-4-08
VG-684-PL-4-10
2
3
4
5
6
7
8
10
4
4
4
4
4
4
4
4
VG-684-SS-6-02
VG-684-SS-6-03
VG-684-SS-6-04
VG-684-SS-6-05
VG-684-SS-6-06
VG-684-SS-6-07
VG-684-SS-6-08
VG-684-SS-6-10
VG-684-PL-6-02
VG-684-PL-6-03
VG-684-PL-6-04
VG-684-PL-6-05
VG-684-PL-6-06
VG-684-PL-6-07
VG-684-PL-6-08
VG-684-PL-6-10
2
3
4
5
6
7
8
10
6
6
6
6
6
6
6
6
18"
228
685
Heavy Duty BeadWall
Low friction guiding surface with high density bead pattern. Larger bead on larger pins accommodate larger
load capacities. Excellent for combiner or accumulation
areas. Operating temperature range: -4F to +170F.
10 ga.
steel channel
(.130)
2"
3/8 carriage
bolt
.13
1.96
2.69
.68
.25
4"
4.61
VG-685-SS-2
VG-685-PL-2
VG-685-SS-4
VG-685-PL-4
VG-685-SS-6
VG-685-PL-6
6"
5.78
6.48
VG-685-SS-8
VG-685-PL-8
VG-685-SS-10
VG-685-PL-10
7.65
8"
.68
.12
.67
c
to L
Combiner section
ends (part # VG-681-)
are listed on page 231.
9.51
10"
229
Plated Channel
VG-685-SS-2-02
VG-685-SS-2-03
VG-685-SS-2-04
VG-685-SS-2-05
VG-685-SS-2-06
VG-685-SS-2-07
VG-685-SS-2-08
VG-685-SS-2-10
VG-685-PL-2-02
VG-685-PL-2-03
VG-685-PL-2-04
VG-685-PL-2-05
VG-685-PL-2-06
VG-685-PL-2-07
VG-685-PL-2-08
VG-685-PL-2-10
2
3
4
5
6
7
8
10
2
2
2
2
2
2
2
2
VG-685-SS-4-02
VG-685-SS-4-03
VG-685-SS-4-04
VG-685-SS-4-05
VG-685-SS-4-06
VG-685-SS-4-07
VG-685-SS-4-08
VG-685-SS-4-10
VG-685-PL-4-02
VG-685-PL-4-03
VG-685-PL-4-04
VG-685-PL-4-05
VG-685-PL-4-06
VG-685-PL-4-07
VG-685-PL-4-08
VG-685-PL-4-10
2
3
4
5
6
7
8
10
4
4
4
4
4
4
4
4
VG-685-SS-6-02
VG-685-SS-6-03
VG-685-SS-6-04
VG-685-SS-6-05
VG-685-SS-6-06
VG-685-SS-6-07
VG-685-SS-6-08
VG-685-SS-6-10
VG-685-PL-6-02
VG-685-PL-6-03
VG-685-PL-6-04
VG-685-PL-6-05
VG-685-PL-6-06
VG-685-PL-6-07
VG-685-PL-6-08
VG-685-PL-6-10
2
3
4
5
6
7
8
10
6
6
6
6
6
6
6
6
VG-685-SS-8-02
VG-685-SS-8-03
VG-685-SS-8-04
VG-685-SS-8-05
VG-685-SS-8-06
VG-685-SS-8-07
VG-685-SS-8-08
VG-685-SS-8-10
VG-685-PL-8-02
VG-685-PL-8-03
VG-685-PL-8-04
VG-685-PL-8-05
VG-685-PL-8-06
VG-685-PL-8-07
VG-685-PL-8-08
VG-685-PL-8-10
2
3
4
5
6
7
8
10
8
8
8
8
8
8
8
8
VG-685-SS-10-02
VG-685-SS-10-03
VG-685-SS-10-04
VG-685-SS-10-05
VG-685-SS-10-06
VG-685-SS-10-07
VG-685-SS-10-08
VG-685-SS-10-10
VG-685-PL-10-02
VG-685-PL-10-03
VG-685-PL-10-04
VG-685-PL-10-05
VG-685-PL-10-06
VG-685-PL-10-07
VG-685-PL-10-08
VG-685-PL-10-10
2
3
4
5
6
7
8
10
10
10
10
10
10
10
10
10
8.38
18"
cL
Stainless Channel
10.24
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Bead and
Roller Guides
1.4
682
Roller Combiner
Low friction guiding surface. Excellent for combiner
or accumulation areas.
Operating temperature range: -4F to +170F.
10 ga.
steel channel
(.130)
1.5
2"
3/8 carriage
bolt
1.85
2.7
.13
.76
.25
4"
3.78
Bead and
Roller Guides
VG-682-SS-4
VG-682-PL-4
6"
5.66
VG-682-SS-10
VG-682-PL-10
8"
18"
VG-682-PL-2-2
VG-682-PL-2-3
VG-682-PL-2-4
VG-682-PL-2-5
VG-682-PL-2-6
VG-682-PL-2-7
VG-682-PL-2-8
VG-682-PL-2-10
2
3
4
5
6
7
8
10
2
2
2
2
2
2
2
2
VG-682-SS-4-2
VG-682-SS-4-3
VG-682-SS-4-4
VG-682-SS-4-5
VG-682-SS-4-6
VG-682-SS-4-7
VG-682-SS-4-8
VG-682-SS-4-10
VG-682-PL-4-2
VG-682-PL-4-3
VG-682-PL-4-4
VG-682-PL-4-5
VG-682-PL-4-6
VG-682-PL-4-7
VG-682-PL-4-8
VG-682-PL-4-10
2
3
4
5
6
7
8
10
4
4
4
4
4
4
4
4
VG-682-SS-6-2
VG-682-SS-6-3
VG-682-SS-6-4
VG-682-SS-6-5
VG-682-SS-6-6
VG-682-SS-6-7
VG-682-SS-6-8
VG-682-SS-6-10
VG-682-PL-6-2
VG-682-PL-6-3
VG-682-PL-6-4
VG-682-PL-6-5
VG-682-PL-6-6
VG-682-PL-6-7
VG-682-PL-6-8
VG-682-PL-6-10
2
3
4
5
6
7
8
10
6
6
6
6
6
6
6
6
VG-682-SS-8-2
VG-682-SS-8-3
VG-682-SS-8-4
VG-682-SS-8-5
VG-682-SS-8-6
VG-682-SS-8-7
VG-682-SS-8-8
VG-682-SS-8-10
VG-682-PL-8-2
VG-682-PL-8-3
VG-682-PL-8-4
VG-682-PL-8-5
VG-682-PL-8-6
VG-682-PL-8-7
VG-682-PL-8-8
VG-682-PL-8-10
2
3
4
5
6
7
8
10
8
8
8
8
8
8
8
8
VG-682-SS-10-2
VG-682-SS-10-3
VG-682-SS-10-4
VG-682-SS-10-5
VG-682-SS-10-6
VG-682-SS-10-7
VG-682-SS-10-8
VG-682-SS-10-10
VG-682-PL-10-2
VG-682-PL-10-3
VG-682-PL-10-4
VG-682-PL-10-5
VG-682-PL-10-6
VG-682-PL-10-7
VG-682-PL-10-8
VG-682-PL-10 -10
2
3
4
5
6
7
8
10
10
10
10
10
10
10
10
10
6.48
VG-682-SS-8
VG-682-PL-8
Plated Channel
VG-682-SS-2-2
VG-682-SS-2-3
VG-682-SS-2-4
VG-682-SS-2-5
VG-682-SS-2-6
VG-682-SS-2-7
VG-682-SS-2-8
VG-682-SS-2-10
4.6
VG-682-SS-2
VG-682-PL-2
VG-682-SS-6
VG-682-PL-6
Stainless Channel
7.62
8.38
.76
.16
.67
cL to cL
Combiner section
ends (part # VG-681-)
are listed on page 231.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
10"
230
9.51
10.24
681
Combiner Section Ends
Sold as pairs. Section Ends can be bolted to the
BeadWall or Roller Combiner frame.
5/16
Height (H)
Slot (A)
No. of Slots
1.75
2.75
3.75
5.38
1.25
.75
1
1.25
1
2
2
2
VG-681-2
VG-681-3
VG-681-4
VG-681-6
1.00
.49
A
H
1.00
VG-684
VG-682/685
.34
1.01
.91
262
VG-262-CS-53
Easy, accurate, adjustable support for BeadWall or Roller Combiners up to 4" size.
Adjust while line is running. All heavy duty stainless and noncorrosive parts.
3/4"
Acme
thread
2.65
Bead and
Roller Guides
Part Number
1.50
VG-682 series
VG-684 series
VG-685 series
4.9
2.65
.40
3.70
slot
2.4 x .34
3.0
Slot matches
mounting holes
in selected
combiner channels.
2.5"
Adjustability
Two 3/8"
carriage
bolts included
Locking
Knob
Adjusting
Knob
6-12" typ.
205-G
54
.88
5.0
1.0
36
1.25
2.30
1.25
.30
1.25
.41
.75
1.50
.25
Part Number
.188
VG-205-G-14-S
.50
2.0
3.80
231
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Combiner Accessories
For Splicing
5.0
117
.63
687BSC
1.25
BeadRail &
SpeedRail
Splice Kits
.50
1.75
3.25
4.5
Length (ft.)
VG-687BSC-25
VG-687BSC-50
25
50
Compatibility
VG-117-50125
VG-117-H50125
VG-117-T50125
Fastener
Bead and
Roller Guides
040
687LDB
22.5
.34
Part Number
VG-040-01
1.0
.34
VG-687LDB-516
VG-687LDB-M8
1.0
5/16
1.0
684WSH
For Fastening
.81
1568
.34
BeadRail Washer
T-head bolts
Part Number
VG-684WSH-S
Adjusting rod
VG-684WSH-S
VG-684BR-1.5-SB-
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
232
Part Number
VG-1568-01
VG-1568-02
VG-1568-03
VG-1568-04
.64
.76
1.01
1.26
VG-205-E
5.00
VG-205-E
Symetrical
about
center line.
6.0
12.0
8"
6.0
12.0
6"
3.50
6.0
VG-205-A,
C or D
.53
12.0
.40
4"
12.0
6.0
12.0
3"
2"
2.0
VG-205-A,
C or D
1.50
VG-205-A,
B,C or D
.88 for
3/8 carriage
bolt
.95
VG-205-A,
B,C or D
4.0
Maximum Deflection
24 Length 36 Length
.007
.024
.005
.016
.010
.034
.006
.019
.010
.034
.006
.019
.009
.031
.007
.024
Moment of
Inertia
.020
.030
.014
.025
.014
.025
.016
.020
Maximum Deflection
24 Length 36 Length
.005
.017
.005
.016
.004
.015
.004
.014
.004
.013
.004
.013
Moment of
Inertia
.048
.053
.057
.061
.064
.066
Pin Length
20 lb. Distributed Weight Load
Pin Dia.
Deflection
233
2
3
4
6
8
10
1/4 dia.
0
n/a
.003
.01
.023
.045
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Bead and
Roller Guides
6.0
2.25
866-765-8744
fax:
866-447-6587
)__________________________________________________ Fax (
) ____________________________________
Single Bends
If available, please include a detailed drawing of desired bend.
BASE PART NUMBER: _____________________ (example: VG-684-Pl-6-)
RADIUS OF BEND (R): _____________________inches
ANGLE OF BEND (D): _____________________degrees
QUANTITY: _____________________pieces
TYPE OF BEND: Inside Curve Outside Curve
Bead and
Roller Guides
Our manufacturing process typically requires the inclusion of 3 to 6 inch tangents on each end of the curve. There is
no additional cost for this. If specific tangents are required, please indicate below.
TANGENT LENGTH (T1):
TANGENT LENGTH (T2):
_____________________inches
_____________________inches
Outside
Curve
Inside
Curve
S-Curve Bends
If available, please include a detailed drawing of desired bend.
BASE PART NUMBER: _____________________ (example: VG-684-Pl-6-)
RADIUS OF BEND (R1):
inches
L1 length
RADIUS OF BEND (R2): _____________ inches
Y angle
L2
ANGLE OF BEND (X): _____________ degrees
length
ANGLE OF BEND (Y): _____________ degrees
R2
R1 radius
radius
LENGTH (L1): _____________ inches
LENGTH (L2): _____________ inches
LENGTH (L3): _____________ inches
X
Use bead contact surface
L3
angle
COMMENTS:
for radius measurement
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
234
length
Oran
Roll ge
ers!
16600
16600 series
Single, Flexible
Roller Module
These low noise, long life, bead guides
offer quick installation and smooth operation. They are designed for boxes and
containers (glass and plastic bottles, tin
and strong aluminum cans). Excellent for
accumulation areas.
16605
Modules slide onto 40mm x 8 mm flat
bars or the "M" profile below. Minimum
radius for a curved section is 10 in.
(beads outside) and 12 in. (beads
inside).
0.10
2.20
0.10
2.20
0.10
1.18
2.20
0.41
0.71
0.20
0.31
Part Number
1.18
0.31
0.35
0.12
1.26
Length
(inches)
beads
rollers
13.72
13.72
Minimum
radius for a curved
section is 10 in. (beads outside)
and 12 in. (beads inside).
0.31
1.30
1.93
16600
16605
Type
16655
16656
.31
Length
190265
5/16"
.06
Part Number
190265
Length
3M (~10 ft.)
.51
1.57
M-Profile
Stainless steel support
for roller modules.
See page 201 for compatible bender rollers.
Type
235
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Bead and
Roller Guides
2.20
1.93
0.10
1.30
2.20
1.61
0.10
0.31
1.26
13.72
2.20
Ora
Bea nge
d
Roll s or
ers!
16801
16800 series
Flexible Roller Module
These low noise, long life, bead guides offer
quick installation and smooth operation. They are
designed for boxes and containers (glass and
plastic bottles, tin and strong aluminum cans).
Excellent for accumulation areas.
16806
2.20
0.10
2.20
13.72
0.10
2.20
0.10
2.20
0.10
1.26
1.18
2.20
Bead and
Roller Guides
2.56
3.19
0.31
0.10
1.97
1.61
2.20
Part Number
0.41
0.20
0.71
Length
(inches)
beads
rollers
13.72
13.72
0.31
16801
16806
Type
1.18
1.26
3.19
2.56
0.12
Minimum
radius for a curved
section is 10 in. (beads outside)
and 12 in. (beads inside).
0.31
0.31
0.35
16827
16828
.31
Length
190265
5/16"
.06
Part Number
190265
.51
1.57
M-Profile
Stainless steel support
for roller modules.
See page 201 for compatible bender rollers.
Type
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
236
Length
3M (~10 ft.)
16500 series
Heavy Duty, Single,
Flexible Roller Module
These low noise, long life, bead guides offer
quick installation and smooth operation. They
are designed for rugged boxes and containers.
Excellent for accumulation areas.
2.56
1.83
0.16
2.56
0.16
2.56
1.71
Part Number
0.83
0.24
16500
0.35
1.71
1.06
1.97
0.12
13.31
Minimum
radius for a curved
section is 10 in. (beads outside)
and 12 in. (beads inside).
1.83
Part Number
16550
.31
Length
(feet)
3M (~10 ft.)
190265
5/16"
.06
Part Number
190265
Length
3M (~10 ft.)
.51
1.57
M-Profile
Stainless steel support
for roller modules.
See page 201 for compatible bender rollers.
Length
(inches)
237
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Bead and
Roller Guides
2.56
1.06
1.97
0.16
1.61
0.87
2.56
Gre
Roll en
ers!
16152
Lane Divider
3M (~10 feet)
1.97
2.75
1.06
0.79
3M (~10 ft.)
0.39
0.35
1.46
33955
1.06
0.91
0.55
0.39
16152
Length
(feet)
0.67
0.08
0.26
0.91
13833
0.43
13833
33955
0.87
0.39
Adjusting Rod
Length
33955
0.35
1/2
16142
16152
Lane Divider
5/16"
Hex
0.53
0.32
1.97
2.55
1.06
Part Number
16142
0.65
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
238
0.98
1.18
0.39
Bead and
Roller Guides
Part Number
0.39
0.98
1.18
0.65
13833
0.39
Length
(feet)
3M (~10 ft.)
240
255, 260
246
Neck and
Body Guides Page
244
250
258
Bar Caps
VG-P116HD
1/16" or
16 ga. bar
1/16"
or
16 ga.
VG-P18HD
Heavy Duty
VG-P18BC
Standard
Can be used
as side guides
1/8"
12 ga.
11 ga.
.30
Material: UHMW
P116SBC
Material: UHMW
.25
Part Number
.08
.25 .34
Length (ft.)
VG-P116SBC-10
VG-P116SBC-20
VG-P116SBC-100
VG-P116SBC-250
10
20
100
250
VG-P104D-10
VG-P104D-20
VG-P104D-100
VG-P104D-250
10
20
100
250
.12
CSI
Part Number
.62
.39
Length (ft.)
VG-CSI-538-10
VG-CSI-538-20
VG-CSI-538-100
VG-CSI-538-250
10
20
100
250
VG-P204-10
VG-P204-20
VG-P204-100
VG-P204-250
10
20
100
250
VG-P18SBC-10
VG-P18SBC-20
VG-P18SBC-100
VG-P18SBC-250
10
20
100
250
VG-P18BC-10
VG-P18BC-20
VG-P18BC-100
VG-P18BC-250
10
20
100
250
VG-P18HD-10
VG-P18HD-20
10
20
.27
.11
P104D
.18
.62
.25
.13
P204
.03
P116HD
P18SBC
.43
.08
.75
VG-P116HD-10
VG-P116HD-20
3/32"
or
13 ga.
R 3/64
Clips onto
3/32 in. or
13 ga. flat bar.
Can be used
as a neck guide.
P18BC
Nolu-SR (reinforced)
helps guide PET
containers in high
speed applications.
Part
Number
.33
.03
.38
.25
.31
.13
.31
.13
10
20
.41
P105R
.25 .34
.50
.38
Nolu-SR
Length
(reinforced) Nolu-S (ft.)
VG-P105R-100
VG-P105RCL-100
VG-P105R-250
VG-P105RCL-250
100
100
250
250
P18HD
Clips onto 1/8 in., 12
ga., or 11 ga. flat bar.
Can be used as a
narrow belt support or
for other heavy duty
applications.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.43
.13
240
.75
.41
Bar Caps
1/8"
12 ga.
11 ga.
Shipping Information:
.81
.13
P1345
.13
.76
.45
Material: UHMW
Part Number
Length(ft.)
VG-P1345-10
VG-P1345-20
10
20
3/16"
or
7 ga.
Material: UHMW
.42
.21
P316BC
Part Number
P316HD
VG-P316BC-10
VG-P316BC-20
VG-P316BC-100
VG-P316BC-250
10
20
100
250
.75
Part Number
Length(ft.)
VG-P316HD-10
VG-P316HD-20
.41
10
20
.62
.50
.20
.20
.50
.38
VG-P316SBC-10
VG-P316SBC-20
VG-P316SBC-100
VG-P316SBC-250
10
20
100
250
P7GABC
.18
.57
VG-P7GABC-10
10
VG-P7GABC-20
20
VG-P7GABC-100 100
VG-P7GABC-250 250
1.36
.19
1.13
.17
P316TBC
Clips onto 3/16 flat bar.
Can be used as a standard belt support.
.36
P7GAHD
Clips onto 7 ga. steel.
Can be used for belt
retention or support.
KVP equivalent
wearstrip.
.63
.48
VG-P316TBC-10
VG-P316TBC-20
10
20
.21
.27
.92
.72
VG-P7GAHD-10
VG-P7GAHD-20
10
20
Static Dissipative
UHMW:
add -SD- to
part number
UV Stabilized
UHMW:
add -UV- to
part number
Example:
VG-P316HD-NS-10
241
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
P316SBC
Material: UHMW
Length(ft.)
.42
.30
.63
.19
Bar Caps
6 mm
PM6BC
Part Number
Clips onto 6 mm
flat bar. Can be used
as a standard belt
support.
Material: UHMW
12mm
6mm
13.5mm
10
mm
VG-PM6BC-10
VG-PM6BC-20
VG-PM6BC-100
VG-PM6BC-250
Static Dissipative
UHMW:
add -SD- to
part number
Black UHMW:
add -B- to
part number
Length(ft.)
10
20
100
250
Nolu-S UHMW:
(reduced friction)
add -NS- to
part number
UV Stabilized
UHMW:
add -UV- to
part number
Example:
VG-P316HD-NS-10
1/4"
Material: UHMW
.75
.27
Part Number
.12
P14TBC
.53
.50
.26
P14BC
10
20
100
250
.50
.38
Length(ft.)
VG-P14BC-10
VG-P14BC-20
VG-P14BC-100
VG-P14BC-250
10
20
100
250
VG-P14HD-10
VG-P14HD-20
10
20
.63
P14SBC
.50
.27
.38
.26
VG-P14SBC-10
VG-P14SBC-20
VG-P14SBC-100
VG-P14SBC-250
P14HD
10
20
100
250
.26
.75
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Belt Sup
port
242
Cage Bar
VG-P316SBC,
VG-P14SBC,
VG-P14BC,
VG-P516BC or
VG-P38BC
Cage Bar
VG-P14TBC-10
VG-P14TBC-20
VG-P14TBC-100
VG-P14TBC-250
.41
Bar Caps
5/16"
10 mm
Material: UHMW
.50
.32
P516BC
Part Number
.50
.38
VG-P516BC-10
VG-P516BC-20
VG-P516BC-100
VG-P516BC-250
18.5 mm
11 mm
10
20
100
250
16 mm
.72
.39
Part Number
Length (ft.)
VG-PM10BC-10
VG-PM10BC-20
VG-PM10BC-100
VG-PM10BC-250
10
20
100
250
.63
.50
VG-P38BC-10
VG-P38BC-20
VG-P38BC-100
VG-P38BC-250
VG-P38BC-500
10
20
100
250
500
VG-P38HD-10
VG-P38HD-20
10
20
P12BC
VG-P12BC-10
VG-P12BC-20
VG-P12BC-100
VG-P12BC-250
10
20
100
250
.75
.52
.69
.50
P38BC
.75
.40
12.5
mm
Clips onto 10 mm
flat bar. Can be used
as a standard belt
support.
1/2"
3/8"
P38HD
Material: UHMW
PM10BC
Length (ft.)
.75
.41
Shipping Information:
243
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Neck Guides
Neck Guides for PET Containers
Helps guide PET containers in high speed, air conveying applications. Nolu-SR is a proprietary alloy of reinforced UHMW and other
USDA accepted lubricants, resulting in a harder, lower friction
material that is ideal in these applications. Though designs differ, the
material of choice is Nolu-SR, proven to increase throughput, reduce
jams and wear longer.
OEMs Choice!
.47
Dimensioned
profiles drawn
to scale.
10+ years
World's leading supplier
.17
NG47
Also available
in anti-static!
.32 .13
Part Number
Neck Guide
Clips onto 11 ga.
(.120) sheet metal.
.083
.33
P105R
R .05
13-14 ga.
P105F
.04
Nolu-S
VG-P105R-100
VG-P105R-250
.49
Nolu-SR (reinforced)
Length (ft.)
VG-P105RCL-100
VG-P105RCL-250
100
250
.26
Neck Guide
R .05
.04
.50
NG50
.24
100
250
13-14 ga.
.77
Part Number
VG-NG50-SR-100
VG-NG50-SR-250
Length (ft.)
100
250
.91
.46
.09
.24
.13 .33
Part Number
NG91
Neck Guide
Length (ft.)
VG-NG81-SR-100
VG-NG81-SR-250
.094
NG81
.39
.19
.38
Part Number
Neck Guide
100
250
VG-NG91-SR-10
VG-NG91-SR-20
Length (ft.)
10
20
1.26
1.10
.20
.20
.39
.20
.43
Part Number
Neck Guide
Replacement for various European
equipment manufacturers.
NG125
.20
.32
Length (ft.)
VG-NG110-SR-10
VG-NG110-SR-20
Neck Guide
10
20
Neck Guide
Curve (2 pieces)
Machined inside and outside
curves. Replacement
38.8
for various
European
equipment
6.8
manufacturers.
Copyright
2005 Solus
Innovations, LLC. All Rights Reserved.
Other special
orderIndustrial
radii available.
.12
.39
NG110
100
250
.24 .10
Neck Guide
Length (ft.)
VG-NG49-SR-100
VG-NG49-SR-250
Length (ft.)
VG-P105F-SR-100
VG-P105F-SR-250
13-14 ga.
Part Number
13-14 ga.
R .123
.083
.33
Neck Guide
.24 .10
.085
100
250
R .123
Neck Guide
NG49
Length (ft.)
VG-NG47-SR-100
VG-NG47-SR-250
VG-NG125-SR-10
VG-NG125-SR-20
Length (ft.)
10
20
VG-NG91-SR-1M28
39.4
(1 meter)
6.8
90
6/05
VG-NG110-SR-1M28
39.9
244
1.1
(28 mm)
VG-NG125-SR-1M28
Shown in drawing to the left.
Body Guides
Bottle Guide
Aluminum guide rail with Nolu-S insert
is used to guide containers, especially
PET, in applications such as air conveying. Many air conveyor users and
manufacturers have found that brush
guides not only tend to get contaminated with debris, which causes increased
friction and marking of PET bottles, but
also the bristles can wear quickly and/or
fall out. Nolu-S is the perfect combination
of extremely low friction in a tough UHMW based
material. Nolu-S will not mark bottles while allowing
faster speeds and greater throughput.
Low friction,
non-marking!
More sanitary
.80
ABG
.66
.66
Accepts VG-PBG
Nolu-S and
Nolu-SD inserts.
.48
.48
VG-ABG-
PBG
Nolu-SD Insert
For use with VG-ABG
aluminum rail. This guide is
available in the ultra low friction Nolu-SD, which combines
low friction qualities with a
static dissipating ability.
VG-ABG2-
.67
.18
.26
Length (ft.)
VG-ABG-10
VG-ABG-20
10
20
VG-ABG2-10
VG-ABG2-20
10
20
Part Number
Length (ft.)
VG-PBG7-NS-100
100
VG-PBG5-NS-100
100
.25
VG-PBG7-NS-
VG-PBG5-NS-
.67
Material: Nolu-SD
.56
.18
.26
.14
.16
.16
.25
VG-PBG7-NSD-
VG-ABG-
VG-ABG2-
VG-PBG5-NSD-
Part Number
Length (ft.)
VG-PBG7-NSD-100
100
VG-PBG5-NSD-100
100
Field Bendable!
.16
.16
Replacement
inserts for
brushes
Reduced
Splices!
.14
Part Number
Material: Nolu-S
.56
Nolu-S Insert
For use with VG-ABG
aluminum rail. This guide
is available in the ultra
low friction Nolu-S.
.80
VG-694-A (2)
VG-694B (1)
VG-694B (2)
VG-694-A (1)
VG-694-C (2)
VG-694B (1)
VG-694B (2)
VG-694-C (1)
245
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Aluminum Rail
Brush
J-Leg Profiles
Superior chain interface and
cleanliness make Solus J-Legs
the right choice for domestic or
international uses. Our J-Legs are
designed to hold tight onto 11 ga.
or 12 ga. sheet metal or 1/8 bar.
1/8"
11 ga
12 ga
3/4" J-Legs
ean
rop
Eu tyle
s
.87
.75
1" J-Legs
Part Number
.11
VG-JSL075-125-10
VG-JSL075-125-20
.38 .13
.05
.12
ean
rop
Eu tyle
s
Part Number
Length(ft.)
1.0
.13
10
20
.13
.38
.13
.05
.75
.12
.75
Length(ft.)
VG-JS100-125-10
VG-JS100-125-20
VG-JS100-125-100
VG-JS100-125-250
10
20
100
250
VG-JS100-188-10
VG-JS100-188-20
10
20
VG-JL081-188-10
VG-JL081-188-20
10
20
VG-JEL-078-125-10
VG-JEL-078-125-20
10
20
.87
.75
.11
.19
VG-JSL075-188-10
VG-JSL075-188-20
.45 .13
.05
.12
10
20
.75
1.0
.75
.19
.13
VG-P18CC-10
VG-P18CC-20
.38 .13
.11
.45 .13
10
20
.05
.12
.75
.94
.13
Preferred Edge
Guide Method:
Chain is guided
by this edge
.03
.19
.46
.31
.17
.08
.10
.91
.13
.50
.13
.42 .17
.10
Chain is guided
by hinge
.03
Typical Hinge
Guide Method:
Black UHMW:
add -B- to
part number
top chain
As a conveyor chain
1.88
guide, this style of
profile uses the rough,
uneven hinge and hinge pin end surface rather than the smoother
outside edge of the flight. With this configuration, the turned-up portion
of the profile is cosmetic and provides no useful purpose.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
246
Nolu-S UHMW:
(reduced friction)
add -NS- to
part number
Example:
VG-P316HD-NS-10
Static Dissipative
UHMW:
add -SD- to
part number
UV Stabilized
UHMW:
add -UV- to
part number
J-Leg Profiles
Shipping Information:
1/8"
11 ga
12 ga
1.0
.13
.40 .15
.12
1" J-Legs
Length(ft.)
VG-J100-125T-10
VG-J100-125T-20
VG-J100-125T-100
VG-J100-125T-250
VG-J100-125T-500
10
20
100
250
500
VG-J100-188-10
VG-J100-188-20
VG-J100-188-100
10
20
100
Part Number
1.5
.13
.38 .13
.05
.12
.75
Length(ft.)
VG-JS150-125-10
VG-JS150-125-20
VG-JS150-125-100
VG-JS150-125-250
10
20
100
250
VG-JS150-188-10
VG-JS150-188-20
10
20
VG-JL137-125-10
VG-JL137-125-20
10
20
VG-J150-125-10
VG-J150-125-20
10
20
1.5
1.0
.19
.47 .16
.05
.12
.19
.45
.13
.05
.12
.75
.13
.31
VG-JEL081-125-10
VG-JEL081-125-20
.13
10
20
.13
.25
.40 .13
.13
.40 .16
.12
.12
.94
.13
.13
.40 .15
.25
VG-JL081-125-10
VG-JL081-125-20
VG-JL081-125-100
VG-JL081-125-250
1.50
10
20
100
250
.13
.40 .13
.12
.12
VG-J100-125T
Black UHMW:
add -B- to
part number
VG-JS100-125
Nolu-S UHMW:
(reduced friction)
add -NS- to
part number
Static Dissipative
UHMW:
add -SD- to
part number
UV Stabilized
UHMW:
add -UV- to
part number
Example:
VG-P316HD-NS-10
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.50
.94
J-Leg Profiles
2" J-Legs
2.0
3.0
.13
.13
.38 .13
.40 .14
.05
.12
.12
.75
Part Number
Part Number
Length(ft.)
VG-JS200-125-10
VG-JS200-125-20
Length(ft.)
VG-J300-125-10
VG-J300-125-20
10
20
2.0
10
20
3.0
.19
.19
.45 .13
.55 .21
.05
.05
.12
.75
VG-JS200-188-10
VG-JS200-188-20
10
20
VG-J300-188-10
VG-J300-188-20
10
20
2.88
2.0
.13
.19
.40 .14
.46 .14
.12
VG-J200-125-10
VG-J200-125-20
.11
10
20
ay
W
rry
VG-750Rivet
Ca
VG-JS100-125
n
tur
Wa
Re
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
248
VG-J288-188-10
VG-J288-188-20
10
20
J-Leg Profiles
Additional J-Leg Profiles
VG-JS3-075-125-10
VG-JS3-075-125-20
VG-JS3-075-125-100
VG-JS3-075-125-250
VG-JS3-075-125-500
HSS-0112 equivalent
.12
.13
.44 .19
W
D
.25
.66 .19
W dim.
5/8
7/8
1-7/8
3/4
1
2
VG-J3-075-250-10
VG-J3-100-250-10
VG-J3-200-250-10
VG-J3-075-250-20
VG-J3-100-250-20
VG-J3-200-250-20
3/4
1
1-1/4
1-1/2
2
7/8
1-1/8
1-3/8
1-5/8
2-1/8
VG-J4-088-188-10
VG-J4-113-188-10
VG-J4-138-188-10
VG-J4-163-188-10
VG-J4-213-188-10
VG-J4-088-188-20
VG-J4-113-188-20
VG-J4-138-188-20
VG-J4-163-188-20
VG-J4-213-188-20
1
1-1/2
2
1-1/8
1-5/8
2-1/8
VG-J4-113-09-10
VG-J4-163-09-10
VG-J4-213-09-10
VG-J4-113-09-20
VG-J4-163-09-20
VG-J4-213-09-20
1
1-1/4
1-1/2
2
1-1/4
1-1/2
1-3/4
2-1/4
VG-JDL4-125-188-10
VG-JDL4-150-188-10
VG-JDL4-175-188-10
VG-JDL4-225-188-10
VG-JDL4-125-188-20
VG-JDL4-150-188-20
VG-JDL4-175-188-20
VG-JDL4-225-188-20
1
1-1/2
2
1-1/4
1-3/4
2-1/4
VG-JDL4-125-09-10
VG-JDL4-175-09-10
VG-JDL4-225-09-10
VG-JDL4-125-09-20
VG-JDL4-175-09-20
VG-JDL4-225-09-20
.19
W
D
.09
.50 .28
W
D
.19
.60 .28
.13
10
20
100
250
500
D dim.
W
D
.60 .28
Length
.13
.13
W
D
.09
.50 .28
.13
3.0
2.88
VG-J4-300-188-10
VG-J4-300-188-20
.19
.63 .30
10
20
249
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Part Number
.75
Part Number
.13
.25
.81
.73
.08
10
VG-P7701-10
10
.25
.12
round rod
Material: UHMW
P516RD
R.15
P38RD
Length(ft.)
VG-P417CT-10
.12
P7701
Material: UHMW
1.0
.88
P417CT
R.25
VG-P516RD-10
VG-P516RD-20
VG-P516RD-100
VG-P516RD-250
.01
R .18
Part Number
Material: UHMW
Length (ft.)
10
20
100
250
P58RD
VG-P38RD-10
VG-P38RD-20
VG-P38RD-100
VG-P38RD-250
R .34
R .24
R .28
.01
P12RD
10
20
100
250
.01
R .30
Part Number
Length (ft.)
VG-P12RD-10
VG-P12RD-20
VG-P12RD-100
VG-P12RD-250
10
20
100
250
VG-P58RD-10
VG-P58RD-20
10
20
VG-P34RD-10
VG-P34RD-20
10
20
R .42
.01
Shipping Information:
UHMW covers and inserts are typically shipped straight in tubes. 8' lengths can be shipped UPS.
Standard 10' or 20' lengths are shipped by common carrier. Selected
items can be coiled into cartons for more convenient shipping.
P34RD
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
250
R .36
R .49
.02
P12HR
1/2 half round
side guide.
Clips onto
1/2 diameter
half round rod.
Part Number
.25
VG-P12HR-10
VG-P12HR-20
R .34
P58HR
5/8 half round
side guide.
Clips onto
5/8 diameter
half round rod.
P34HR
Material: UHMW
R .26
Length (ft.)
10
20
Material: UHMW
Part Number
.50
R .47
.03
Length (ft.)
VG-P34HR-10
VG-P34HR-20
VG-P34HR-100
VG-P34HR-250
VG-P34HR-500
10
20
100
250
500
VG-P34HRL-10
VG-P34HRL-20
10
20t
R .33
VG-P58HR-10
VG-P58HR-20
VG-P58HR-100
VG-P58HR-250
VG-P58HR-500
.38
R .41
.03
P34HRL
10
20
100
250
500
R .38
R .47
.50
45
.41
.03
.56
VG-P34HR
Sta
in
el
Ste
s
les
VG-P34HRL
VG-S34HR
S12HR
.50
R .25
VG-S12HR-10
VG-S12HR-20
Length (ft.)
10
20
S58HR
5/8 half round rod.
VG-S58HR-10
VG-S58HR-20
.63
Part Number
S34HR
10
20
VG-S34HR-10
VG-S34HR-20
.75
Length (ft.)
10
20
R .38
251
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Tube Covers
These low friction, wear resistant
UHMW covers are designed to fit
around various sizes of tubing or bar.
Applications include spiral conveyor
vertical member wear strips.
1.0
.10
.13
1.0
Also see
page 242
P1x1BC
1 x 1 tube cover.
Material: UHMW
Part Number
.50
Length (ft.)
VG-P1x1BC-10
VG-P1x1BC-20
10
20
P5010BC
1.0
.38
.25
.10
.50
.13
1.0
P1010RBC
.75
VG-P5010BC-10
VG-P5010BC-20
10
20
VG-P1010RBC-10 10
VG-P1010RBC-20 20
.50
1.15
.38
1.25
.10
.13
Material: UHMW
.13
P58115BC
.25
P125125BC
.58
1.25
VG-P125125BC-10
VG-P125125BC-20
.75
.13
VG-P58115BC-10 10
VG-P58115BC-20 20
10
20
1.50
2.0
.13
.13
P1515BC
1.50
P1520BC
1-1/2 x 2 tube cover.
VG-P1515BC-10
VG-P1515BC-20
VG-P1520BC-10
VG-P1520BC-20
10
20
1.0
10
20
1.50
2.0
.13
2.0
.13
P2x2BC
2.0
P1520RBC
1-1/2 x 2 ribbed tube cover.
2 x 2 tube cover.
1.50
VG-P2x2BC-10
VG-P2x2BC-20
VG-P1520RBC-10 10
VG-P1520RBC-20 20
10
20
1.50
2.25
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
252
Bars Covers
VG-P2510BC
1/4 X 1 bar
Material: UHMW
Material: UHMW
Part Number
P2515BCB
Length (ft.)
P2515DBC
VG-P2515BCB-10 10
VG-P2515BCB-20 20
Part Number
Length (ft.)
VG-P2515DBC-10 10
VG-P2515DBC-20 20
1.79
1.50
.13
.13
.13
.13
.26
.26
.59
P2510BC
VG-P2510BC-10
VG-P2510BC-20
P1878BC
10
20
10
20
.12
.10
.14
.39
.26
.50
VG-P1878BC-10
VG-P1878BC-20
.88
1.13
P1910BC
P2510NBC
VG-P1910BC-10
VG-P1910BC-20
10
20
VG-P2510NBC-10 10
VG-P2510NBC-20 20
1.0
.13
.13
.27
.19
.75
1.27
.75
1.25
Black UHMW:
add -B- to
part number
Nolu-S UHMW:
(reduced friction)
add -NS- to
part number
UV Stabilized
UHMW:
add -UV- to
part number
Example:
VG-P316HD-NS-10
253
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.59
Bar Covers
P2515BC
Belt support. For use with
1/4 x 1-1/2 bar.
1.50
P2115BC
Material: UHMW
Part Number
.10
Length (ft.)
VG-P2515BC-10
VG-P2515BC-20
Material: UHMW
10
20
1.50
.27
Part Number
.13
Length (ft.)
VG-P2115BC-10
10
VG-P3920BC-10
VG-P3920BC-20
10
20
VG-P5015BC-10
VG-P5015BC-20
10
20
.21
1.19
.75
P2520BC
VG-P2520BC-10
VG-P2520BC-20
P3920BC
10
20
2.0
2.0
.13
.12
.39
.27
1.62
1.39
P2520NBC
P5015BC
VG-P2520NBC-10 10
VG-P2520NBC-20 20
.12
2.0
1.75
.12
.27
.75
.10
1.53
1.11
P5015LBC
Side guide. For use with
1/2 x 1-1/2 bar.
.12
P5020BC
VG-P5015LBC-10 10
VG-P5015LBC-20 20
VG-P5020BC-10
VG-P5020BC-20
2.0
1.75
.51
.75
.10
1.50
.49
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
254
10
20
Shipping Information:
Combination Group A
.55
.46
5/16
hex
11/16
1/2
3/8
carriage
.81
1.25
Material: Aluminum
.72
.62
Length (ft.)
VG-A700-10
VG-A700-20
VG-A500-10
VG-A500-20
VG-A1000-10
VG-A1000-20
.28
.28
10
20
.20
.75
.75
.39
Material: UHMW
Length (ft.)
VG-P2007-10
VG-P2007-20
VG-P2007-250
VG-P512-10
VG-P512-20
VG-P512R-10
VG-P512R-20
10
20
250
VG-A1000
VG-A500
VG-P512
VG-P2007
255
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
The following aluminum extrusions can be used with any of the UHMW inserts
listed in this group. These rails are commonly used as side guides and as support
members under belting and table top chain. Fastening hardware not included.
.47
.38
.69
.33
5/16
hex
.33
.64
5/16
hex
5/16
hex
.46
.78
1.25
Material: Aluminum
.47
.46
Length (ft.)
VG-A275-10
VG-A275-20
VG-A600-8
VG-A600-10
VG-A600-20
VG-A225-10
VG-A225-20
.10
.10
.10
.23
.63
.81
.81
8
10
20
VG-A900-10
VG-A900-20
.75
.25
.13
.25
.50
.25
Material: UHMW
.25
Length (ft.)
VG-P813F-10
VG-P813F-20
VG-P813F-100
VG-P0808-10
VG-P0808-20
VG-P611-10
VG-P813-10
VG-P813-20
VG-P813-100
10
20
100
.10
VG-A600
.10
2.13
1.25
VG-P816F
1.50
1.39
1.0
.25
.25
.25
.25
VG-P820F-10
VG-P820F-20
VG-P822F-10
VG-P822F-20
Material: UHMW
.25
Length (ft.)
VG-P816F-10
VG-P816F-20
VG-P824F-10
VG-P824F-20
Static Dissipative
UHMW:
add -SD- to
part number
UV Stabilized
UHMW:
add -UV- to
part number
VG-A900
Example:
VG-P316HD-NS-10
VG-P834F
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
256
VG-P834F-10
VG-P834F-20
10
20
.86
.35
.38
.13
.13
.12
.12
.86
.27
.63
1.13
.88
1.0
1/4
1.13
.50
Material:
Aluminum
.27
.63
Material:
UHMW
3/8
.14
Length (ft.)
VG-A1878-10
VG-A1878-20
VG-A1878T-10
VG-A1878T-20
Length (ft.)
10
20
VG-P1878BC-10
VG-P1878BC-20
VG-P1878RBC-10
VG-P1878RBC-20
10
20
Static Dissipative
UHMW:
add -SD- to
part number
Black UHMW:
add -B- to
part number
VG-P1878BC
VG-P1878RBC
Nolu-S UHMW:
(reduced friction)
add -NS- to
part number
UV Stabilized
UHMW:
add -UV- to
part number
Example:
VG-P316HD-NS-10
VG-A1878T
Combination Group D
The following aluminum extrusions can be used with any of the UHMW inserts listed in this group.
These rails are commonly used as side guides and as support members under belting and table
top chain. The aluminum rail fastens with a 5/16 hex head bolt (not included).
.13
.12
3.0
2.03
2.0
2.25
2.0
.34
2.0
2.25
.13
1.20
.25
Material:
Aluminum
.48
.28 .22
.27
.50
.63
Length (ft.)
VG-A2520-10
VG-A2520-20
10
20
VG-P2520BC-10
VG-P2520BC-20
VG-P2520NBC-10
VG-P2520NBC-20
VG-P2520WBC-10
Material:
UHMW
Length (ft.)
10
20
VG-A2520
5/16
VG-P2520BC
257
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Combination Group E
1.57
0.79
Part Number
Length
19048C
19048
19071
19070
3M (10 ft.)
6M (20 ft.)
0.16
1.69
Material: UHMW
Part Number
0.13
0.11
0.33
0.12
0.11
0.13
0.06
1.18
0.39
0.16
1.18
0.12
1.14
0.39
0.47
0.12
The following metal channels can be used with the UHMW inserts listed in this group. These rails are commonly used as guide rails or
support members under belting and table top chain. Mounting clamps and accessories designed for these metal channels are listed
below.
Material: UHMW
Color
Length
Black
Green
6M (20 ft.)
6M (20 ft.)
Part Number
19073
19072
Color
Length
Black
Green
6M (20 ft.)
6M (20 ft.)
Material: Polyamide
Part Number
14109
0.04
A
0.67
0.59
A
0.67
0.14
B
0.79
0.63
0.63
Use these clamps for mounting and splicing the metal channel
supports. Uses 5/16 inch fastening hardware.
Material: Polyamide
A
.51
.32
.24
Fastener
Part Number
14111
5/16
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
258
Fastener
.51
.32
.24
5/16
14110T
5.98
0.98
0.28
1.26
0.24
2.17
0.39
0.63
0.16
0.47
1.18
0.25
0.59
0.39
1.18
0.67
1.57
0.79
0.63
0.98
1/4
5.98
0.98
1.26
0.24
2.17
0.39
0.63
0.16
0.47
1.18
0.12
14110
0.28
14110
0.25
0.63
0.67
1.57
0.79
0.39
1.18
0.59
0.12
0.98
14110T
259
1/4
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
A350
Light Duty
Aluminum Rail
.38
Material: Aluminum
Part Number
.65 .31
5/16
10
20
.54
Material: UHMW
VG-A350
.25
P350
Part Number
.46
UHMW Cover
Length (ft.)
VG-P350-10
VG-P350-20
.32
10
20
VG-P350
.50
A5015
Material: Aluminum
Part Number
.85
1.50
.10
Length (ft.)
VG-A5015-10
VG-A5015-20
5/16
10
20
.12
Material: UHMW
P5015BC
UHMW Covers &
Aluminum Rails
Length (ft.)
VG-A350-10
VG-A350-20
Part Number
VG-A5015
UHMW Cover
Length (ft.)
VG-P5015BC-10
VG-P5015BC-20
1.75
1.11
10
20
VG-P5015BC
.50
Material: Aluminum
A5020
Aluminum Rail
Part Number
.89
1.97
Length (ft.)
VG-A5020-10
VG-A5020-20
3/8
Accepts VG-P5020BC
UHMW cover. Fastens with 3/8
carriage bolt (not included).
10
20
.68
.07
VG-A5020
P5020BC
Material: UHMW
Part Number
2.16
VG-P5020BC-10
VG-P5020BC-20
UHMW Cover
For use with VG-A5020 rail.
VG-P5020BC
.65
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
260
Length (ft.)
10
20
5015
Steel Rail
Galvanized (G5015) or stainless steel (S5015). Accepts
VG-P5015BC UHMW cover.
Fastens with 3/8 carriage
head bolt (not included).
Part Number
1.50
.39
3/8
.50
.10
10
20
10
20
.12
Material: UHMW
P5015BC
UHMW Cover
Length (ft.)
VG-G5015-10
VG-G5015-20
VG-S5015-10
VG-S5015-20
Part Number
1.75
1.11
Length (ft.)
VG-P5015BC-10
VG-P5015BC-20
VG-G5015
or
10
20
VG-S5015
VG-P5015BC
.75
.10
.12
Material: UHMW
P5015LBC
For use with VG-G5015
or VG-S5015 rail or any
1/2 x 1-1/2 bar.
VG-G5015
or
.75
Length (ft.)
VG-P5015LBC-10 10
VG-P5015LBC-20 20
VG-S5015
VG-P5015LBC
.75
P2.5DB
Material: UHMW
2.5
Length
(ft.)
Part Number
3.25
Dogbone
VG-P2.5DB-10
VG-P2.5DB-20
10
20
.25
P38
3/8 UHMW Round Bar
Material: UHMW
.375
P12
1/2 UHMW Round Bar
VG-021-
Part Number
Dia.
Length
(ft.)
VG-P38RDBAR-10
VG-P38RDBAR-20
3/8
3/8
10
20
Part Number
Dia.
Length
(ft.)
VG-P12RDBAR-10
VG-P12RDBAR-20
1/2
1/2
10
20
Material: UHMW
.50
VG-032VG-621-
Can be used as
FLEXIBLE
guides
261 or rails!
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved.
6/05
UHMW Cover
Part Number
1.75
.49
Flight Edging
Flight Edging
Made from low friction, low wear, corrosive resistant UHMW, flight edging is a
proven value that can extend the life of new screws and salvage existing ones
with worn edges. It has also proven beneficial on inclined conveyors by safely
reducing the clearance between screw and trough, helping to minimize fall-back
of smaller particles.
PITCH
OF
FLIGHTS
D
.75
Flight edging is simply installed by winding the material around the shaft
between the flights, then starting at one end, progressively tapping the extrusion onto the edge of the flight with a block or hammer. A fastener is required at
the leading edge to hold flight edging in place.
Material: UHMW
Nolu Part
Number, 50 ft.
C
Profile
Width
D
Profile
Thickness
Nolu Part
Number, 100 ft.
Valu Guide
equivalent, 100 ft.
VFE4-6-063-50
VFE4-6-134-50
VFE4-6-134-50
VFE6-6-188-50
SCX-6-1/16-100
SCX-6-134-100
SCX-6-134-100
SCY-6-3/16-100
VFE4-6-063-100
VFE4-6-134-100
VFE4-6-134-100
VFE6-6-188-100
6
6
6
6
1/16 (.063)
1/8 (.125)
.134
3/16 (.188)
.437
.437
.437
.625
.350
.350
.350
.350
SCX-9-104-50
SCX-9-104-50
SCX-9-134-50 VFE4-9-134-50
SCY-9-3/16-50 VFE6-9-188-50
SCY-9-1/4-50
VFE6-9-250-50
SCY-9-1/4-50
VFE6-9-250-50
VFE7-9-375-50
SCY-9-3/8-50
-
SCX-9-104-100
SCX-9-104-100
SCX-9-134-100
SCY-9-3/16-100
SCY-9-1/4-100
SCY-9-1/4-100
SCY-9-3/8-100
VFE4-9-134-100
VFE6-9-188-100
VFE6-9-250-100
VFE6-9-250-100
VFE7-9-375-100
-
9
9
9
9
9
9
9
9
3/32 (.094)
.104
.134
3/16 (.188)
7/32 (.219)
1/4 (.250)
3/8 (.375)
3/8 (.375)
.437
.437
.437
.625
.625
.625
.750
.625
.350
.350
.350
.350
.350
.350
.350
.350
SCX-12-134-50
SCX-12-134-50
SCY-12-3/16-50
SCY-12-1/4-50
SCY-12-3/8-50
VFE4-12-134-50
VFE4-12-134-50
VFE6-12-188-50
VFE6-12-250-50
VFE7-12-375-50
-
SCX-12-134-100
SCX-12-134-100
SCY-12-3/16-100
SCY-12-1/4-100
SCY-12-3/8-100
VFE4-12-134-100
VFE4-12-134-100
VFE6-12-188-100
VFE6-12-250-100
VFE7-12-375-100
-
12
12
12
12
12
12
1/8 (.125)
.134
3/16 (.188)
1/4 (.250)
3/8 (.375)
3/8 (.375)
.437
.437
.625
.625
.750
.625
.350
.350
.350
.350
.350
.350
SCX-16-134-50
SCY-16-1/4-50
SCY-16-1/4-50
SCY-16-3/8-50
VFE4-16-134-50
VFE6-16-250-50
VFE6-16-250-50
VFE7-16-375-50
-
SCX-16-134-100
SCY-16-1/4-100
SCY-16-1/4-100
SCY-16-3/8-100
VFE4-16-134-100
VFE6-16-250-100
VFE6-16-250-100
VFE7-16-375-100
-
16
16
16
16
16
7/32
1/4
3/8
3/8
.134
(.219)
(.250)
(.375)
(.375)
.437
.625
.625
.750
.625
.350
.350
.350
.350
.350
SCY-20-1/4-50
-
VFE6-20-250-50
VFE7-20-375-50
SCY-20-1/4-100
-
VFE6-20-250-100
VFE7-20-375-100
20
20
1/4 (.250)
3/8 (.375)
.625
.750
.350
.350
SCY-24-1/4-100 VFE6-24-250-100
VFE7-24-375-100
SCY-24-3/8-100
SCY-24-3/16-100
-
24
24
24
24
.625
.750
.625
.625
.350
.350
.350
.350
SCX-6-1/16-50
SCX-6-134-50
SCX-6-134-50
SCY-6-3/16-50
To determine approximate
amount of edging required
(in feet), use the following
formulas:
A
B
Screw
Flight
Dia. (in.) Thickness
Valu Guide
equivalent, 50 ft.
Irregular Pitch
SCY-24-1/4-50 VFE6-24-250-50
VFE7-24-375-50
SCY-24-3/8-50
SCY-24-3/16-50
-
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
262
1/4
3/8
3/8
3/16
(.250)
(.375)
(.375)
(.188)
Nolu-S
UHMW
Bearings of other dimensions or manufactured from other engineered plastics can be made readily available.
HAA
Hanger Bearing
C
HAB
Hanger Bearing
Hanger styles: 16B-216-216F-230-316
F
B
G
HAC
Hanger Bearing
Hanger styles:
20B-26B-28B-220-226-326
F
263
UHMW
Nolu-S
HAA-1624
HAA-2432
HAA-2438
HAA-3248
HAA-3959
HAA-4866
SAA-1624
SAA-2432
SAA-2438
SAA-3248
SAA-3959
SAA-4866
1
1-1/2
1-7/16
1-1/2
2
1-15/16
1-1/2
2-3/8
1-15/16
2
3
1-15/16
2-7/16 3-11/16 2-15/16
3
4-1/8
2-15/16
UHMW
Nolu-S
HAB-1625
HAB-2436
HAB-3252
HAB-3964
HAB-4872
HAB-5578
SAB-1625
SAB-2436
SAB-3252
SAB-3964
SAB-4872
SAB-5578
1
1-1/2
2
2-7/16
3
3-7/16
1-9/16
2-1/4
3-1/4
4
4-1/2
4-7/8
1-1/8
1-3/8
1-5/8
1-5/8
2-1/8
2-11/16
1
1-3/8
1-5/8
2-1/8
2-1/4
2-7/16
UHMW
Nolu-S
HAC-1624
HAC-2434
HAC-3244
HAC-3952
HAC-4864
HAC-5576
SAC-1624
SAC-2434
SAC-3244
SAC-3952
SAC-4864
SAC-5576
1
1-1/2
2
2-7/16
3
3-7/16
1-1/2
2-1/8
2-3/4
3-1/4
4
4-3/4
1-1/16
1-9/16
1-9/16
2-3/8
2-3/8
3-1/8
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
VGT
Standard UHMW
Coiled Strip
Available in standard 50ft.
rolls. Longer lengths available.
Fast UPS shipping. Easy to
cut, no saw required. Easy
to install. Rivets can be used
Self-adhesive
with 1/8" material.
backing
Adhesive Backed
UHMW Coiled Strip
Allows strip to be quickly and
easily mounted.
Standard
coiled strip
Adhesive backed
coiled strip
Nolu-S
coiled strip
VGT-0612-050
VGT-0616-050
VGT-0624-050
VGT-0632-050
VGT-1212-050
VGT-1216-050
VGT-1224-050
VGT-1232-050
VGT-0612PS-050
VGT-0616PS-050
VGT-0624PS-050
VGT-0632PS-050
VGT-1212PS-050
VGT-1216PS-050
VGT-1224PS-050
VGT-1232PS-050
VGT-1212-NS-050
VGT-1216-NS-050
VGT-1224-NS-050
VGT-1232-NS-050
VGT-1212PS-NS-050
VGT-1216PS-NS-050
VGT-1224PS-NS-050
VGT-1232PS-NS-050
1/16 3/4
1/16
1
1/16 1-1/2
1/16
2
1/8
3/4
1/8
1
1/8 1-1/2
1/8
2
Splicing options
for UHMW-tape:
up
to
24
"
VGRU
Standard UHMW
Roll UHMW
Available in standard 50 ft.
rolls. Longer lengths and other
materials available. Rivets can
be used with 1/8" material.
Nolu-S UHMW
VGRU-116-6-50
VGRU-116-12-50
VGRU-116-18-50
VGRU-116-24-50
VGRU-18-6-50
VGRU-18-12-50
VGRU-18-18-50
VGRU-18-24-50
Can be used
as a chute
or trough liner.
1/16
1/16
1/16
1/16
6
12
18
24
1/8
1/8
1/8
1/8
6
12
18
24
VGRU-18-6-NS-50
VGRU-18-12-NS-50
VGRU-18-18-NS-50
VGRU-18-24-NS-50
750
Drive Rivet
Used to attach wear strips to metal or plastic
frames. Can be used for slotted holes with
washer. Head can be mounted flush with thinner wear strips using standard countersink.
Rivets wear at the same rate as wear strips,
and will not cut into chains. Easily installed into
.257 dia. (F drill), blind or thru hole. Maximum
continuous service temperature: 180 F.
82
.25
UHMW
Countersink
Framework
Cut flush after
installation if desired
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Hole
264
Part Number
Grip
(Min.)
Grip
(Max.)
VG-750-10
VG-750-20
VG-750-30
.75
1.0
1.5
.111
.111
.111
.188
.25
.375
.5
.75
1.25
Positioning Page
Cross blocks
Shaft collars
Accessory mounts
Support rods
267
284
303
SpeedSet Page
274-279, 291-296
L Brackets
SpeedSet Brackets
Adjusting Rods
and Caps
Brackets &
Positioning
VG-210 shown
see page 270.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
266
VG-202LTC
VG-202LH
VG-210
VG-292
VG-203L
VG-203LH
VG-203LC
Standard Duty
VG-203LTC
Rod
10.25
3.55
Part Number
4.0
1.25
VG-293
4.21
3.31
3.54
3/8
.45
.41
1.70
ria
ble
136 series
Material
1/2
5/8
3/4
1/2
5/8
3/4
PA
PA
PA
PP
PP
PP
1.77
2.40
Rod
8.66
1.18
7.05
13641
13648
3.94
Rod
VG-221
1.97
Mid-Size Guide
Rail Bracket
VG-221-12
VG-221-58
VG-221-34
VG-221PP-12
VG-221PP-58
VG-221PP-34
Brackets &
Positioning
2.89
Va
VG-293 VG-221
Heavy Duty
221
Heavy Duty Guide
Rail Bracket
VG-203LHT
Rod
1/2
5/8
0.20
0.28
.41
1.57
267
2.36
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
203L
Bracket Body
1.77
Rod support
washer
1.98
VG-212
or
VG-232
series
5.77
VG-203L
3.78
3/8
2.64
VG-011-01
VG-SSR
.45
3.29
VG-621
.41
1.95
Spacers
can be
used with
brackets.
See page 282.
3/8 bolt
2.53
203LTC
Rod
Part Number
8.96
2.82
VG-203L
VG-292
2.08
1.75
Swivel Bracket
VG-212
3.45
3.78
VG-203LTC-12
VG-203LTC-58
VG-203LTC-34
2.64
Rod
1/2
5/8
3/4
3/8
.45
.37
Shaft Collars
can be used
with brackets.
See page 316.
.41
1.95
3.29
See Related
Products
2.53
Brackets &
Positioning
203LHS
2.08
Rod
1.94
Swivel Bracket
2.74
3.43
Part Number
8.91
3.78
2.64
3/8
2.08
Rod
1.94
9.89
3.66
4.35
Part Number
3.78
VG-203LHTS-12
VG-203LHTS-58
2.64
3/8
.37
3.29
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1/2
5/8
.41
1.95
2.53
Swivel Bracket
Rod
.45
.37
3.29
203LHTS
VG-203LHS-12
VG-203LHS-58
268
.45
.41
1.95
Rod
1/2
5/8
203LC
Rod
1.72
Swivel Bracket
3.45
2.76
7.49
Part Number
3/8
3.78
Rod
VG-203LC-12
VG-203LC-58
2.64
1/2
5/8
.45
.37
.41
1.95
3.29
2.08
203HS
3.28
Swivel Cap
Assembly
Part Number
Rod
1.61
.89
Rod
VG-203HS-12
VG-203HS-58
1/2
5/8
3/8-16
1.19
2.08
203HTS
4.19
Part Number
Swivel Cap
Assembly
Rod
2.52
1.81
Rod
VG-203HTS-12
VG-203HTS-58
1/2
5/8
3/8-16
1.19
1.97
1378
1.57
Part Number
2.56
Rod
Rod
13781V
13783V
1/2
5/8
Brackets &
Positioning
4.07
Swivel Cap
Assembly
1.41
2.08
203TC
Transition Cap
Assembly
Part Number
Rod
1.64
.90
Rod
VG-203TC-12
VG-203TC-58
VG-203TC-34
1/2
5/8
3/4
3/8-16
1.40
HT
HT
H
VG-203-TC
Transition Cap
Assembly
VG-203-HT
Swivel Cap
Assembly
VG-200-225Safety Cap
VG-212 or 232
Adjusting Rod
VG-205
Series Bracket
VG-200-225
Safety Cap
Note: When
stacking rings are
used, rod center
line changes and
a longer bolt
is required.
VG-212 or 232
Adjusting Rod
2.81
2.31
1.39
VSR
VSR
VSR
VSR
2.40
1.90
1.40
VSR
VSR
VSR
VSR
VSR
VSR
VG-205
Series Bracket
269
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
210
Rod
7.55
1.19
Part Number
2.47
VG-210-12
VG-210-58
VG-210-34
VG-210PP-12
VG-210PP-58
VG-210PP-34
3.0
.50
3/8
1.68
2.84
.58
VG-290
.38
2.50
VG-291
.41
1.62
Rod
Material
1/2
5/8
3/4
1/2
5/8
3/4
PA
PA
PA
PP
PP
PP
Va
r ia
ble
VG-210F-12
VG-210F-58
VG-210F-34
VG-210FPP-12
VG-210FPP-58
VG-210FPP-34
VG-210
VG-210
1.19
1.76
Bracket Body
2.29
4.61
VG-212
or
VG-232
series
3/8
1.76
2.85
Part Number
2.63
VG-202L
.55
VG-202FL
.41
1.62
VG-031-12
Shaft Collars
can be used
with brackets.
See page 316.
3/8 bolt
VG-621
See Related
Products
VG-202L
1.91
Brackets &
Positioning
PA
PA
PA
PP
PP
PP
Rod support
washer
202L
For use with threaded
adjusting rod and
cross blocks
where vertical
and horizontal
adjustment is
needed.
1/2
5/8
3/4
1/2
5/8
3/4
202LTC
2.0
1.13
Rod
Swivel Bracket
Support for guide rails
where both horizontal
and swivel adjustment
is required.
Part Number
2.54
7.61
3.07
Rod
VG-202LTC-12
1/2
1.76
VG-202FLTC-12
1/2
.55
.37
2.63
.41
1.62
1.91
202LHS
Swivel Bracket
Support for guide rails
where both horizontal
and swivel adjustment
is required.
2.0
1.32
Rod
2.52
7.56
Part Number
3.05
VG-202LHS-12
3/8
1.76
2.85
270
.41
1.62
Rod
1/2
VG-202FLHS-12
.55
.37
2.63
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Spacers
can be
used with
brackets.
See page 282.
1/2
202LC
Swivel Bracket
Support for guide rails
where both horizontal
and swivel adjustment
is required.
Rod
1.10
3.07
2.54
6.34
Part Number
Rod
VG-202LC-12
2.85
3/8
1.76
1/2
VG-202FLC-12
.55
.37
2.63
1/2
.41
1.62
2.0
202TC
Transition Cap
Assembly
3.13
Rod
1.64
.90
Part Number
Rod
VG-202TC-12
1/2
1.40
2.0
202HS
3.09
Swivel Cap
Assembly
Rod
1.61
.90
Part Number
Rod
VG-202HS-12
1/2
VG-CTOP
Swivel Cap
VG-212 or 232
Adjusting Rod
VG-200-225
Safety Cap
1.19
CTOP
1.84
Swivel Cap
Support for guide rails
where swivel adjustment
is required. For use on
VG-202L and VG-203L
bracket bodies or other
mounting surfaces.
Brackets &
Positioning
VG-205
Series Bracket
Part Number
.89
1.81
.09
.45 max.
1.18
1.40
M10
Rod
VG-CTOP-12
VG-CTOP-58
1/2
5/8
VG-011-01
VG-SSR
VG-SCAP
VG-203L
SCAP
Stainless
Swivel Cap
Support for guide rails where
swivel adjustment is required.
For use on VG-202L and
VG-203L bracket bodies or
other mounting surfaces.
Rod
1.73
.89
1.81
.10
.45 max.
1.25
271
M10
Part Number
VG-SCAP-12
VG-SCAP-58
Rod
1/2
5/8
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Adjusting Rods
Material: 303 stainless steel.
212
1/2 Adjusting Rod
Connects to VG-011, VG-012, VG-016
and VG-018 style clips and clamps.
.50
wrench flat
1/2 rod
5/16-18 or
3/8-16 x 3/4
deep thread
.38
.38
1/2 rod
.50 wrench flat
Rod lengths: 12, 15, 18, 24 in.
Part Number
VG-212-3-516
VG-212-3-38
VG-212-5-516
VG-212-5-38
VG-212-8-516
VG-212-8-38
VG-212-10-516
VG-212-10-38
VG-212-12-516
VG-212-12-38
VG-212-15-516
VG-212-15-38
VG-212-18-516
VG-212-18-38
VG-212-24-516
VG-212-24-38
3
3
5
5
8
8
10
10
12
12
15
15
18
18
24
24
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
See Related
Products
232
Brackets &
Positioning
.50
wrench flat
.50
5/8 rod
5/16-18 or
3/8-16 x 3/4
deep thread
.50
5/8 rod
.50 wrench flat
Rod lengths: 12, 15, 18, 24 in.
VG-011-01
VG-SSR
VG-621
VG-212
or
VG-232
VG-203L
VG-292
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
272
Part Number
VG-232-4-516
VG-232-4-38
VG-232-6-516
VG-232-6-38
VG-232-8-516
VG-232-8-38
VG-232-10-516
VG-232-10-38
VG-232-12-516
VG-232-12-38
VG-232-15-516
VG-232-15-38
VG-232-18-516
VG-232-18-38
VG-232-24-516
VG-232-24-38
4
4
6
6
8
8
10
10
12
12
15
15
18
18
24
24
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
SE-582
Materials: Stainless Steel.
Pres
Part Number
VG-SE-582-516
VG-SE-582-38
VG-SE-582-M8
VG-SE-582-M10
65
X .0
3/4
in
Tub
VG-SE-582
End Insert
Thread
Pull Out
Load (lbs.)
5/16-18
3/8-16
M8
M10
900
900
900
900
VG-SE-582
212J, 232J
Guide rail that has been formed into curves or angles can easily be positioned with Valu Guide
Jointed Adjusting Rods. When used with Valu Guide brackets, spacers and rail clamps, the
adjusting rods must be held in a parallel position for smooth
adjustment while the pivoting clevis can be attached at various
angles to the guide rail. A simple release of the bracket hand
knobs allows the rails to be adjusted to the desired position.
Length
1.40
.63
.50 (1/2")
or
.63 (5/8")
.56
1/8 stainless
steel dowel
be
required for proper set back of VG-202 and
VG-203 brackets to allow
To adjust, turn
for the jointed adjusting rod
the hand knob to
clevis extension.
release the tension
on the rod.
Jointed Rods
for Rod Ends
VG-212J-3-516
VG-212J-3-38
VG-212J-5-516
VG-212J-5-38
VG-212J-7-516
VG-212J-7-38
VG-212J-9-516
VG-212J-9-38
VG-232J-4-516
VG-232J-4-38
VG-232J-6-516
VG-232J-6-38
VG-232J-8-516
VG-232J-8-38
VG-232J-10-516
VG-232J-10-38
(in.)
Length (in.)
Tapped
Thread
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3
3
5
5
7
7
9
9
4
4
6
6
8
8
10
10
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
Brackets &
Positioning
The VG-040-01 clip will also allow the use of a jointed rod
when attaching to products with fasteners that do not rotate.
273
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
SpeedSet Brackets
1
Collar hangs loose
on rod sleeve for
"Home Position"
Positioning Spacers
Push Knob
2
Spring Pressure
Spring
Piston Rod
Rod Sleeve
Brackets
Brackets &
Positioning
Patent Numbers
5,819,911
5,967,295
6,135,271
6,533,110
HOME POSITION:
ADJUSTMENT:
nut
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
MODIFIED POSITION:
2
1
274
SpeedSet Brackets
5" Sleeve
The required sleeve length can be determined by measuring or calculating the distance
from the edge of the largest container to the edge of the conveyor and adding 2". Once
the calculation is done, select the next largest sleeve size.
largest container
to conveyor edge
+ 2" =
3.60
221Q-
Minimum
sleeve length
3.81
largest
container
Double side
adjusting
To calculate
the range of
travel when a
single side of
the conveyor
guide rail is
adjusting, use
the following
formula:
Largest container
Smallest container
smallest
of travel
- container
2 = range
for each side
largest
container
31/4" Chain
3" sleeve
11/2" travel
VG-221 bracket
VG-291 bracket
spacers may be
required to allow
for adjustment
Single side
adjusting
Standard
fixed bracket
smallest
container
range of travel
for a single side
41/2" Chain
71/2" Chain
3" sleeve
11/2" travel
VG-221 bracket
5" sleeve
11/2" travel
VG-221 bracket
275
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
To calculate
the range of
travel when
both sides of
the conveyor
guide rail are
adjusting, use
the following
formula:
Range of Travel
SpeedSet Brackets
SpeedSet Spacers
Three types of positioning spacers have been developed for SpeedSet brackets. A Positioning Collar is
included with each SpeedSet bracket. The length of the spacer included with each bracket corresponds
to the length of travel of the bracket ordered, either 1, 1-1/2 or 2-1/2 inches.
Some spacers can accommodate 3 positioning lengths including the "Home Position" by cutting to the required length
as shown. Additional positioning spacers can be purchased in 18 inch lengths and cut to length as needed.
QSC
Length
Material: Polypropylene
Part Number
Color
Length (in.)
VG-QSC-10M
VG-QSC-12M
VG-QSC-16M
Red
Blue
Black
.39
.47
.63
VG-QSC-20M
VG-QSC-25M
VG-QSC-30M
Green
Purple
Orange
.79
.98
1.18
VG-QSC-40M
Gray
1.58
Length (in.)
VG-QT-01
QPC
Positioning Collar
cut
This spacer, in 1, 1-1/2 or 2-1/2 inch length depending on travel chosen, is included
with each SpeedSet bracket. A single spacer can accommodate 2 positioning
lengths in addition to the "Home Position" by cutting as shown. To make additional
spacers, 18 inch sections can be purchased and cut to length as needed. Use the
following part number:
"Home
Position"
Part Number
Inclu
d
each ed with
Spee
Brac dSet
ket!
VG-QPC-1.0
VG-QPC-1.5
VG-QPC-2.5
VG-QPC-18
1st
Position
Length (in.)
1
1-1/2
2-1/2
18
2nd
Position
Ho
Patent # 6,533,110
1
t
cu
QSB
Positioning Spacer
"Home
Position"
VG-QSB-1.0
VG-QSB-1.5
VG-QSB-2.5
VG-QSB-18
Length (in.)
1
1-1/2
2-1/2
18
Length (in.)
VG-QT-01
cu
cut
Brackets &
Positioning
me
2n
itio
os
dp
t
1s ion
sit
po
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
276
1st
Position
2nd
Position
SpeedSet Brackets
Swivel Top SpeedSet Brackets
This bracket is required for curves, lane changes, and combiner areas, and allows in
and out adjustments of the rails at any angle relative to the conveyor. For additional
bracket body specifications, see VG-221 on page 267 and VG-210 on page 270.
203Q
Materials: Polyamide
bracket. Stainless steel
rod and spring assembly.
PVC push knob.
B
2.53
Sleeve
0-1"
Part Number
1.74
2.76
3.79
3.29
Sleeve
0-1"
Sleeve
0-2"
Part Number
Part Number
VG-203Q-02-10-516
VG-203Q-02-10-38
VG-203Q-03-10-516
VG-203Q-03-10-38
VG-203Q-05-10-516
VG-203Q-05-10-38
VG-203Q-03-15-516
VG-203Q-03-15-38
VG-203Q-05-15-516
VG-203Q-05-15-38
VG-203Q-05-25-516
VG-203Q-05-25-38
Part Number
Part Number
Part Number
202Q
B
1.91
VG-202Q-02-10-516
VG-202Q-02-10-38
VG-202Q-03-10-516
VG-202Q-03-10-38
VG-202Q-05-10-516
VG-202Q-05-10-38
A
1.13
2.54
VG-202Q-03-15-516
VG-202Q-03-15-38
VG-202Q-05-15-516
VG-202Q-05-15-38
VG-202Q-05-25-516
VG-202Q-05-25-38
Tapped Rod
Thread (A)
Sleeve
Length (B)
5/16
3/8
5/16
3/8
5/16
3/8
2
2
3
3
5
5
Tapped Rod
Thread (A)
Sleeve
Length (B)
5/16
3/8
5/16
3/8
5/16
3/8
2
2
3
3
5
5
2.85
2.63
221Q
Materials: Polyamide
bracket. Stainless steel
rod and spring assembly.
PVC push knob.
Sleeve
0-1"
Sleeve
0-1"
Sleeve
0-2"
Part Number
1.25
3.60
3.81
Part Number
Part Number
VG-221Q-02-10-516
VG-221Q-02-10-38
VG-221Q-03-10-516
VG-221Q-03-10-38
VG-221Q-05-10-516
VG-221Q-05-10-38
VG-221Q-03-15-516
VG-2210Q-03-15-38
VG-221Q-05-15-516
VG-221Q-05-15-38
VG-221Q-05-25-516
VG-221Q-05-25-38
Part Number
Part Number
Part Number
Tapped Rod
Thread (A)
Sleeve
Length (B)
5/16
3/8
5/16
3/8
5/16
3/8
2
2
3
3
5
5
Tapped Rod
Thread (A)
Sleeve
Length (B)
5/16
3/8
5/16
3/8
5/16
3/8
2
2
3
3
5
5
2.88
210Q
B
1.76
A
1.19
2.56
VG-210Q-02-10-516
VG-210Q-02-10-38
VG-210Q-03-10-516
VG-210Q-03-10-38
VG-210Q-05-10-516
VG-210Q-05-10-38
VG-210Q-03-15-516
VG-210Q-03-15-38
VG-210Q-05-15-516
VG-210Q-05-15-38
VG-210Q-05-25-516
VG-210Q-05-25-38
2.81
2.50
277
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
1.78
SpeedSet Brackets
Range of Range of
Travel
Travel
Range of Travel
Single side
adjusting
Double side
adjusting
Largest container
Standard
fixed bracket
Smallest container
Larger
containers
Smaller containers
(notice positioning spacer
installed on rod)
Brackets &
Positioning
Types of Positioning
(A)
Range of
Rod Travel
Rod lengths provide either 1, 1.5 or 2.5 inches of travel from the end of the sleeve. Positioning spacers (page 276) are used to counter the force of the spring, and hold the rod and
guide rails in an extended position. The spacer size determines the distance that the rails are
positioned away from the sleeve and bracket. If no positioning spacers are used, the rod is
retracted by the spring, and the rails are at "Home Position".
(B)
Sleeve
The rod sleeve is available in 2, 3, and 5 inch lengths, and is positioned as needed in the
bracket by tightening the acorn nut. Further rail adjustments should be made through the use
of positioning spacers.
(C)
Bracket
To help in finding the "Home Position" for the rod and guide rails, various bracket configurations can be used. Bracket sizes, bracket spacers, and stacking rings can be selected to best
locate the rod. See page 282 for related components.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
278
SpeedSet Brackets
2.15
.50
1.09
212JQ
.75
.625
Jointed SpeedSet
Rod Adapter
.50
VG-212JQ-38
VG-212JQ-516
3/8
5/16
VG-203LTC Brackets
VG-292 Spacers
Small Containers
Large
Containers
Rods must
be parallel
VG-011-01 Clips
VG-212J-5-38 Rods
Brackets &
Positioning
Rods must
be parallel
33298
Quick Adjust
Head
Part Number
33298
0.16 inch.
Rod
1/2
0.59
1.38
1.55
2.93
M10
0.5 Rod
1.38
1.18
279
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
The characteristics of polyamide resin make it an excellent material choice for molded
component parts that must stand up to demanding industrial applications. Solus uses
reinforced polyamide to provide our customers with products, such as the plastic "L"
brackets, that are dimensionally stable and have high mechanical strength. The brackets have high
rigidity and toughness, resistance to heat deformation, and resistance to many chemicals. Continuous
operating temperature range: -4F to +190F. Withstands intermittent temperatures up to 220F.
Polyamide
.36
.33
245-H
245-J
.36
.33
.33
Single
Slot Bracket
.36
.50
r
ro
ppe
r u cket!
o
f
a
r
e
Us wer b
lo
3.0
4.5
Double
Slot Bracket
.50
1.85
r
ro
ppe
r u cket!
o
f
a
r
e
Us wer b
lo
.65
5.85
1.85
1.56
1.5
.33
.33
2.29
.5
Black
VG-245-J-BK
VG-245-J-GR
.44
3.0
Part Number
Gray
1.75
.5
3.6
3.6
VG-245-H-BK
VG-245-H-GR
2.0
.56
1.5
1.56
1.5
.33
Part Number
r
er o
upp et!
for rack
e
Us wer b
lo
1.13
7.64
1.56
1.56
2.29
Double
Slot Bracket
3.38
.56
.56
1.56
1.56
245-K
.39
Gray
Part Number
VG-245-K-BK
VG-245-K-GR
Black
Gray
Brackets &
Positioning
.33
.39
245-L
.36
.33
245-M
.50
3.38
1.85
Double Slot
Offset Bracket
.12
Double Slot
Offset Bracket
.12
1.13
.65
5.85
Top rail is
intentionally set
back to avoid
container
contact
7.64
1.85
2.0
.56
.56
1.56
1.56
1.56
1.5
1.56
VG-245
Offset "L" Bracket
1.5
.33
.33
2.29
1.75
3.12
.5
3.72
VG-245-L-BK
VG-245-L-GR
Black
Gray
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.44
VG-245-M-BK
VG-245-M-GR
280
Black
Gray
5/16 bolt
VG-245-HDW-01-S516
RH-30-BK-FS51618
VG-245-HDW-02-S516
VG-245-WSH-S
5/16 carriage bolt
VG-245-WSH-S
VG-245-HDW-03-S516
Square Washer
Carriage bolt
1.0
Material: 18 ga. stainless steel.
VG-245-WSH-S
.34
Part Number
VG-245-WSH-S
Flat washer
Lock washer
Nut
VG-245-L
1.98
5/16
VG-018
Rail Clip
1.98
VG-245-L
VG-245-HDW-01-516
Hardware Kit
VG-SSR
Round Rail
VG-245-HDW-02-516
Hardware Kit
Bracket lateral
adjustment is
1.98 inches in
either direction.
VG-245-H
VG-245-H
5/16
281
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
Spacers
Used to increase the distance
between VG-202 or VG-210 series
brackets and the mounting surface. VG-291 is designed to be
used with the bracket or in multiples when the squaring lip is
desired. The VG-290 is used with
the bracket or the VG-291 when
no lip is desired.
.18
.10
.10
Material: Polyamide.
Part Number
VG-290
VG-291
1.98
3.0
.33
.40
.75
.75
VG-290
VG-291
VG-290
(Side frame
mount spacer)
VG-291
(Intermediate
spacer)
Va
r ia
ble
1.97
.75
292
Spacer
Used to increase the distance
between VG-203 series brackets
and the mounting surface. May be
used in multiples.
VG-202 series
or VG-210
Material: Polyamide.
Part Number
3.82
2.95
VG-292
VG-292
Vari
1.94
293
Brackets &
Positioning
Spacer
Used to increase the distance
between VG-221 series brackets
and the mounting surface. May be
used in multiples.
able
VG-203 series
.75
Material: Polyamide.
Part Number
4.21
3.75
VG-293
VG-293
Va
VSR
ria
ble
VG-221
1.19
Material: Polyamide.
Stacking Ring
.50
VG-VSR
Part Number
VG-VSR
1.17
1.40
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
282
280
1.28
3/8-16
M10, M8
M6
Part Number
Female Knob
VG-280-38F
VG-280-M10F
VG-280-M8F
VG-280-M6F
VG-280PP-38F
VG-280PP-M10F
VG-280PP-M8F
VG-280PP-M6F
2.0
.28
1.48
280
Material
Thread
PA
PA
PA
PA
PP
PP
PP
PP
3/8-16
M10
M8
M6
3/8-16
M10
M8
M6
3/8-16 or M10
Part Number
2.0
.59
Male Knob
Used alone or as
replacement for VG-202H
series bracket caps.
VG-280-38M
VG-280-M10M
Material
Thread
PA
PA
3/8-16
M10
Material
Thread
PA
M10
Material
Thread
PA
M10
.41
2.0
280K
M10
Part Number
2.0
Female Knob
VG-280K
.83
281
M10
Part Number
Female Knob
2.0
VG-281-M10F
Brackets &
Positioning
1.28
282
Part Number
3/8-16
or M10
Female Knob
2.08
.28
VG-282-38F
VG-282-M10F
VG-282PP-38F
VG-282PP-M10F
Material
Thread
PA
PA
PP
PP
3/8-16
M10
3/8-16
M10
1.67
3/8-16 or M10
282
Part Number
.59
Male Knob
Used alone or as
replacement for VG-203H
series bracket caps.
2.08
.41
VG-282-38M
VG-282-M10M
Material
Thread
PA
PA
3/8-16
M10
2.19
283
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
254B
less p
tain
m
All sor Hi-Te e
siv
lf
stee d Corro ns
io
an licat
app
.92
Bracket with
Eyelet and Nut
1/4-20
threaded
insert
hex head
bolt
1.53
less p
tain
m
All sor Hi-Te e
f
siv
l
e
ste d Corro ns
an licatio
app
cL
.14
Part Number
VG-254B-S-12
Rod (in.)
1/2
1.25
1/2,
5/8,
3/4 rod
3.0
5.0
4.0
1/4-20
threaded
insert
hex head
bolt
VG-253B-S-12
VG-253B-S-58
VG-253B-S-34
Rod (in.)
1/2
5/8
3/4
1.53
less p
tain
m
All sor Hi-Te e
f
siv
l
stee d Corro ns
io
n
t
a
lica
app
cL
1.25
1/2,
5/8,
3/4 rod
.14
3.0
4.0
5.0
.4
thru
Brackets &
Positioning
2.50
3.0
1.56
253N
1/2
4.0
Set screw fastening provides holding and positioning of 1/2 in. rods.
Heavy duty construction for increased
strength and rigidity.
Bracket with
Hex Head Bolt
1.13
.12
Small Bracket
with Hex Head Bolt
253B
cL
VG-253N-S-12
VG-253N-S-58
VG-253N-S-34
Rod not included.
2.2
VG-212-8-516
2.0
Eyelet
VG-253K
Knob
VG-018
VG-200-225
VG-254 series
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
284
VG-253 series
Rod (in.)
1/2
5/8
3/4
254K
.92
cL
1.13
.12
Small Bracket
with Hand Knob
Part Number
Rod (in.)
VG-254K-S-12
.4
thru
1/2
1.56
253K
cL
1.53
1.25
1/2,
5/8,
3/4 rod
.14
Bracket with
Hand Knob
Provides holding and positioning of 1/2, 5/8 and
3/4 in. rods. Heavy duty
construction for increased
strength and rigidity.
2.50
3.0
4.0
Part Number
3.0
4.0
5.0
3.21
1.57
0.43
0.35
0.27
3.54
Rod
Rod
33231
1/2
7/16
VG-628
VG-031-12
Sq.
0.85
2.36
0.43
Rd.
Part
Number
Rod not included.
0.35
5.12
1.97
Bracket with
Hand Knob
Knob fastening provides
holding and positioning for
rods. Heavy duty construction for increased strength
and rigidity.
1/2
5/8
3/4
2.2
33231
Rod (in.)
VG-253K-S-12
VG-253K-S-58
VG-253K-S-34
.4
thru
VG-621
VG-215-12T
VG-254B
VG-253K
285
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
1/2
Patent #
6,189,685
6,669,009
6,752,260
Variable knob
mounting
213-01
Brackets &
Positioning
Part Number
VG-213-12-01
VG-213-58-01
VG-213-34-01
2.52
Rod (in.)
1/2"
5/8"
3/4"
1.15
6.33
.41
2.94
1.84
1.38
2.38
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
less p
tain
m
All sor Hi-Te e
f
siv
l
stee d Corro ns
io
n
t
a
lica
app
286
VG-213N-12-01
VG-213N-58-01
VG-213N-34-01
Rod (in.)
1/2"
5/8"
3/4"
213T-01
VG-213T-12-01
VG-213T-58-01
VG-213T-34-01
2.52
Rod (in.)
1/2"
5/8"
3/4"
1.15
.27
.40
6.33
.41
2.94
1.84
2.38
VG-213TN-12-01
VG-213TN-58-01
VG-213TN-34-01
213-02
Rod (in.)
1/2"
5/8"
3/4"
ign
Des cers.
d
e
a
p
d
ten for s
Ex need
o
VG-213-12-02
VG-213-58-02
VG-213-34-02
Rod (in.)
1/2"
5/8"
3/4"
1.90
2.52
6.33
.41
ign
Des cers.
d
pa
de
2.94
rs
en
Ext need fo
1.84
No
1.38
3.05
less p
tain
m
All sor Hi-Te e
f
siv
l
e
ste d Corro ns
an licatio
app
287
VG-213N-12-02
VG-213N-58-02
VG-213N-34-02
Rod (in.)
1/2"
5/8"
3/4"
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
1.38
Part Number
less p
tain
m
All sor Hi-Te e
f
siv
l
e
e
r
st d Co ro ns
an licatio
app
213R
Part Number
Patent #
6,189,685
6,543,608
6,669,009
6,752,260
Rod (in.)
VG-213R-12-01
VG-213R-58-01
VG-213R-34-01
1/2"
5/8"
3/4"
Base Only
VG-213R-B
1.66
2.52
(1/2" rod)
2.42
(5/8" rod)
2.34
(3/4" rod)
4.36
.41
5.90
less p
tain
m
All sor Hi-Te e
f
siv
l
e
e
st d Corro ns
an licatio
app
2.94
1.84
1.38
Part Number
Rod (in.)
VG-213RN-12-01
VG-213RN-58-01
VG-213RN-34-01
2.88
1/2"
5/8"
3/4"
Base Only
Brackets &
Positioning
VG-213R-B
VG-213RN-TOP
VG-213R-TOP
VG-223RN-TOP
VG-223R-TOP
1.52
2.64
1.80
1.54
.93
1.22
213R-TOP
213RN-TOP
223R-TOP
223RN-TOP
Part Number
Part Number
VG-223R-TOP-12
VG-223R-TOP-58
VG-223R-TOP-34
VG-223RN-TOP-12
VG-223RN-TOP-58
VG-223RN-TOP-34
Part Number
Part Number
VG-213R-TOP-12
VG-213R-TOP-58
VG-213R-TOP-34
VG-213RN-TOP-12
VG-213RN-TOP-58
VG-213RN-TOP-34
Dia. Rod
1.13
1.03
.95
1/2"
5/8"
3/4"
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
288
1.20
Diameter Rod
1/2"
5/8"
3/4"
223-01
Part Number
VG-223-12-01
VG-223-58-01
VG-223-34-01
Rod (in.)
1/2"
5/8"
3/4"
1.35
3.81
8.85
.41
Part Number
less p
tain
m
All sor Hi-Te e
f
siv
l
e
ste d Corro ns
an licatio
app
3.31
4.21
Rod (in.)
1/2"
5/8"
3/4"
2.94
223-02
ign
Des ers.
ed
ac
end r sp
Ext need fo
No
VG-223-12-02
VG-223-58-02
VG-223-34-02
Rod (in.)
1/2"
5/8"
3/4"
2.10
ed
end
Ext sign
De need rs.
3.81
No space
for
8.85
.41
4.21
1.51
Part Number
less p
tain
m
All sor Hi-Te e
f
siv
l
stee d Corro ns
an licatio
app
3.31
VG-223N-12-02
VG-223N-58-02
VG-223N-34-02
Rod (in.)
1/2"
5/8"
3/4"
3.69
289
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
1.51
VG-223N-12-01
VG-223N-58-01
VG-223N-34-01
223R
Patent #
6,189,685
6,543,608
6,669,009
6,752,260
VG-223R-12-01
VG-223R-58-01
VG-223R-34-01
Rod (in.)
1/2"
5/8"
3/4"
Base Only
VG-223R-B
1.85
3.81
8.85
6.21
less p
tain
m
All sor Hi-Te e
f
siv
l
e
e
st d Corro ns
an licatio
app
.41
Part Number
VG-223RN-12-01
VG-223RN-58-01
VG-223RN-34-01
3.31
4.21
1.51
Rod (in.)
1/2"
5/8"
3/4"
Base Only
3.44
VG-223R-B
223F-01
Brackets &
Positioning
Part Number
VG-223F-01
.41
1.35
3.72
VG-641T-N
9.45
5.43
.41
3.31
4.21
1.51
2.94
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
290
VG-641T-K
VG-203HTS
0-1"
A
Part Number
1.66
2.34
2.94
2.88
Materials: Stainless
steel bracket, rod and
spring assembly. PVC
push knob.
Sleeve
0-1"
Sleeve
0-2"
Part Number
Part Number
VG-213RQ-02-10-516
VG-213RQ-02-10-38
VG-213RQ-03-10-516
VG-213RQ-03-10-38
VG-213RQ-05-10-516
VG-213RQ-05-10-38
VG-213RQ-03-15-516
VG-213RQ-03-15-38
VG-213RQ-05-15-516
VG-213RQ-05-15-38
VG-213RQ-05-25-516
VG-213RQ-05-25-38
Part Number
Part Number
Part Number
Tapped Rod
Thread (A)
Sleeve
Length (B)
5/16
3/8
5/16
3/8
5/16
3/8
2
2
3
3
5
5
Tapped Rod
Thread (A)
Sleeve
Length (B)
5/16
3/8
5/16
3/8
5/16
3/8
2
2
3
3
5
5
223RQ
B
A
1.85
VG-223RQ-02-10-516
VG-223RQ-02-10-38
VG-223RQ-03-10-516
VG-223RQ-03-10-38
VG-223RQ-05-10-516
VG-223RQ-05-10-38
3.81
VG-223RQ-03-15-516
VG-223RQ-03-15-38
VG-223RQ-05-15-516
VG-223RQ-05-15-38
VG-223RQ-05-25-516
VG-223RQ-05-25-38
4.21
3.44
291
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
213RQ
213Q
Materials: Stainless
steel bracket, rod and
spring assembly. PVC
push knob.
Sleeve
Sleeve
0-1"
2.52
1.15
Part Number
2.94
2.38
0-1"
Sleeve
0-2"
Part Number
Part Number
VG-213Q-02-10-516
VG-213Q-02-10-38
VG-213Q-03-10-516
VG-213Q-03-10-38
VG-213Q-05-10-516
VG-213Q-05-10-38
VG-213Q-03-15-516
VG-213Q-03-15-38
VG-213Q-05-15-516
VG-213Q-05-15-38
VG-213Q-05-25-516
VG-213Q-05-25-38
Part Number
Part Number
Part Number
213TQ
B
2.52
1.15
Brackets &
Positioning
2.94
VG-213TQ-02-10-516
VG-213TQ-02-10-38
VG-213TQ-03-10-516
VG-213TQ-03-10-38
VG-213TQ-05-10-516
VG-213TQ-05-10-38
VG-213TQ-03-15-516
VG-213TQ-03-15-38
VG-213TQ-05-15-516
VG-213TQ-05-15-38
VG-213TQ-05-25-516
VG-213TQ-05-25-38
Part Number
Part Number
Part Number
Tapped Rod
Thread (A)
Sleeve
Length (B)
5/16
3/8
5/16
3/8
5/16
3/8
2
2
3
3
5
5
Tapped Rod
Thread (A)
Sleeve
Length (B)
5/16
3/8
5/16
3/8
5/16
3/8
2
2
3
3
5
5
Tapped Rod
Thread (A)
Sleeve
Length (B)
5/16
3/8
5/16
3/8
5/16
3/8
2
2
3
3
5
5
2.38
223Q
B
VG-223Q-02-10-516
VG-223Q-02-10-38
VG-223Q-03-10-516
VG-223Q-03-10-38
VG-223Q-05-10-516
VG-223Q-05-10-38
A
1.35
3.81
VG-223Q-03-15-516
VG-223Q-03-15-38
VG-223Q-05-15-516
VG-223Q-05-15-38
4.21
2.94
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
292
VG-223Q-05-25-516
VG-223Q-05-25-38
Post Brackets
Available options:
211
Post Brackets
This stainless steel bracket offers a clean, finished look while firmly holding
guide rails in place. Post Brackets can be used alone or in combination with
VG-205 or VG-245 angle brackets.
1.32 OD tube
.78
.78
3.5
2.5
3/8
5/16
3/8
5/16
3/8
5/16
3/4
3/4
5/8
5/8
1/2
1/2
Hdw.
Size
Pilot
Hole (in.)
VG-211T3-25-34
VG-211T5-25-34
VG-211T3-25-58
VG-211T5-25-58
VG-211T3-25-12
VG-211T5-25-12
VG-211T3-35-34
VG-211T5-35-34
VG-211T3-35-58
VG-211T5-35-58
VG-211T3-35-12
VG-211T5-35-12
3/8
5/16
3/8
5/16
3/8
5/16
3/4
3/4
5/8
5/8
1/2
1/2
VG-211-3-25-34
VG-211-5-25-34
VG-211-3-25-58
VG-211-5-25-58
VG-211-3-25-12
VG-211-5-25-12
VG-211-3-35-34
VG-211-5-35-34
VG-211-3-35-58
VG-211-5-35-58
VG-211-3-35-12
VG-211-5-35-12
Eyebolt
Threaded
connector
.20
293
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
Tab/Hdw.
Size
211Q
(A)
Range of piston rod travel:
1, 1-1/2 or 2-1/2 inches
SpeedSet Post
Brackets
(B)
Sleeve length:
2, 3, or 5 inches
(C)
Bracket Height:
2.5 or 3.5 inches
(D)
Optional Positioning Tabs:
3/8 and 5/16 inches
3/8 or 5/16
hardware
(E)
Rod end tap:
3/8-16 or 5/16-18 inches
Collar
Positioning Spacer
Inclu
1st
Position
"Home Position"
(spacer not
engaged)
Ho
me
1
t
cu
Brackets &
Positioning
0-1"
With Tabs
Sleeve
Length (in.)
Sleeve
Tab/Hdw.
Size (in.)
2nd
Position
cut
ded!
(Optional)
Without Tabs
Travel
(in.)
Rod
Tap (in.)
1.0
1.0
1.0
1.0
3/8
5/16
3/8
5/16
VG-211QT3-25-02-10-38
VG-211QT3-25-02-10-516
VG-211QT5-25-02-10-38
VG-211QT5-25-02-10-516
VG-211QT3-35-02-10-38
VG-211QT3-35-02-10-516
VG-211QT5-35-02-10-38
VG-211QT5-35-02-10-516
VG-211Q-3-25-02-10-38
VG-211Q-3-25-02-10-516
VG-211Q-5-25-02-10-38
VG-211Q-5-25-02-10-516
VG-211Q-3-35-02-10-38
VG-211Q-3-35-02-10-516
VG-211Q-5-35-02-10-38
VG-211Q-5-35-02-10-516
1.0
1.0
1.0
1.0
3/8
5/16
3/8
5/16
VG-211QT3-25-03-10-38
VG-211QT3-25-03-10-516
VG-211QT5-25-03-10-38
VG-211QT5-25-03-10-516
VG-211QT3-35-03-10-38
VG-211QT3-35-03-10-516
VG-211QT5-35-03-10-38
VG-211QT5-35-03-10-516
VG-211Q-3-25-03-10-38
VG-211Q-3-25-03-10-516
VG-211Q-5-25-03-10-38
VG-211Q-5-25-03-10-516
VG-211Q-3-35-03-10-38
VG-211Q-3-35-03-10-516
VG-211Q-5-35-03-10-38
VG-211Q-5-35-03-10-516
1.0
1.0
1.0
1.0
3/8
5/16
3/8
5/16
VG-211QT3-25-05-10-38
VG-211QT3-25-05-10-516
VG-211QT5-25-05-10-38
VG-211QT5-25-05-10-516
VG-211QT3-35-05-10-38
VG-211QT3-35-05-10-516
VG-211QT5-35-05-10-38
VG-211QT5-35-05-10-516
VG-211Q-3-25-05-10-38
VG-211Q-3-25-05-10-516
VG-211Q-5-25-05-10-38
VG-211Q-5-25-05-10-516
VG-211Q-3-35-05-10-38
VG-211Q-3-35-05-10-516
VG-211Q-5-35-05-10-38
VG-211Q-5-35-05-10-516
2 inch sleeves
3/8
3/8
5/16
5/16
2
2
2
2
3 inch sleeves
3/8
3/8
5/16
5/16
3
3
3
3
5 inch sleeves
3/8
3/8
5/16
5/16
5
5
5
5
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
294
Travel
Adjustment Range (Travel),
0 thru 1 inches
Sleeve
Rod
0-1"
With Tabs
Tab/Hdw.
Size (in.)
Sleeve
Length (in.)
11/2" Collar
Positioning Spacer
included with each
bracket. See page 276
for more information.
Without Tabs
Travel
(in.)
Rod
Tap (in.)
1.5
1.5
1.5
1.5
3/8
5/16
3/8
5/16
VG-211QT3-25-03-15-38
VG-211QT3-25-03-15-516
VG-211QT5-25-03-15-38
VG-211QT5-25-03-15-516
VG-211QT3-35-03-15-38
VG-211QT3-35-03-15-516
VG-211QT5-35-03-15-38
VG-211QT5-35-03-15-516
VG-211Q-3-25-03-15-38
VG-211Q-3-25-03-15-516
VG-211Q-5-25-03-15-38
VG-211Q-5-25-03-15-516
VG-211Q-3-35-03-15-38
VG-211Q-3-35-03-15-516
VG-211Q-5-35-03-15-38
VG-211Q-5-35-03-15-516
1.5
1.5
1.5
1.5
3/8
5/16
3/8
5/16
VG-211QT3-25-05-15-38
VG-211QT3-25-05-15-516
VG-211QT5-25-05-15-38
VG-211QT5-25-05-15-516
VG-211QT3-35-05-15-38
VG-211QT3-35-05-15-516
VG-211QT5-35-05-15-38
VG-211QT5-35-05-15-516
VG-211Q-3-25-05-15-38
VG-211Q-3-25-05-15-516
VG-211Q-5-25-05-15-38
VG-211Q-5-25-05-15-516
VG-211Q-3-35-05-15-38
VG-211Q-3-35-05-15-516
VG-211Q-5-35-05-15-38
VG-211Q-5-35-05-15-516
3 inch sleeves
3/8
3/8
5/16
5/16
3
3
3
3
3/8
3/8
5/16
5/16
5
5
5
5
Travel
Adjustment Range (Travel),
0 thru 2 inches
Sleeve
Rod
0-2"
With Tabs
Tab/Hdw.
Size (in.)
Sleeve
Length (in.)
21/2" Collar
Positioning Spacer
included with each
bracket. See page 276
for more information.
Without Tabs
Travel
(in.)
Rod
Tap (in.)
2.5
2.5
2.5
2.5
3/8
5/16
3/8
5/16
VG-211QT3-25-05-25-38
VG-211QT3-25-05-25-516
VG-211QT5-25-05-25-38
VG-211QT5-25-05-25-516
VG-211QT3-35-05-25-38
VG-211QT3-35-05-25-516
VG-211QT5-35-05-25-38
VG-211QT5-35-05-25-516
VG-211Q-3-25-05-25-38
VG-211Q-3-25-05-25-516
VG-211Q-5-25-05-25-38
VG-211Q-5-25-05-25-516
VG-211Q-3-35-05-25-38
VG-211Q-3-35-05-25-516
VG-211Q-5-35-05-25-38
VG-211Q-5-35-05-25-516
5 inch sleeves
3/8
3/8
5/16
5/16
5
5
5
5
295
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
5 inch sleeves
SpeedSet Cartridges
SpeedSet Cartridges
cut
3/8" or 5/16"
tap x 3/4" deep
1/2"
Ho
me
3/4"
Sleeve Length
1
t
cu
Range of
Travel
Range of
Travel
Sleeve Length
Q-10
Inclu
d
each ed with
Spee
dSe
Cartr
idge t
!
Tapped
Rod Thread
Part
Number
5/16
VG-Q-02-10-516
3/8
VG-Q-02-10-38
5/16
VG-Q-03-10-516
3/8
VG-Q-03-10-38
5/16
VG-Q-05-10-516
3/8
VG-Q-05-10-38
5/16
VG-Q-03-15-516
3/8
VG-Q-03-15-38
5/16
VG-Q-05-15-516
3/8
VG-Q-05-15-38
5/16
VG-Q-05-25-516
3/8
VG-Q-05-25-38
2"
SpeedSet Cartridge,
0-1" Travel
3"
Brackets &
Positioning
5"
1"
Q-15
SpeedSet Cartridge,
0-1.5" Travel
3"
5"
1"
Q-25
SpeedSet Cartridge,
0-2.5" Travel
5"
2"
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
296
.50
.40
1.5
205-A
Part Number
.50
VG-205-A-18-P
VG-205-A-18-S
VG-205-A-316-P
VG-205-A-316-S
VG-205-A-14-P
VG-205-A-14-S
1.75
Long
Angle Bracket
.63
5.30
(Double Slot)
1.75
90
Stainless
Plated Thickness
1/8
1/8
3/16
3/16
1/4
1/4
3.25
2.0
.50
Part Number
.40
205-B
1.5
.50
Standard
Angle Bracket
2.0
3.75
90
VG-205-B-18-P
VG-205-B-18-S
VG-205-B-316-P
VG-205-B-316-S
VG-205-B-14-P
VG-205-B-14-S
Stainless
Plated Thickness
1/8
1/8
3/16
3/16
1/4
1/4
3.25
2.0
.50
.40
1.5
205-C
5.0
Gusseted
Angle Bracket
1.25
.75
Part Number
VG-205-C-18-P
VG-205-C-18-S
VG-205-C-316-P
VG-205-C-316-S
VG-205-C-14-P
VG-205-C-14-S
Stainless
Plated Thickness
1/8
1/8
3/16
3/16
1/4
1/4
1.25
.25
3.75
2.0
.50
.40
1.5
205-D
3/16 or 1/4
Part Number
4.13
Long
Angle Bracket
VG-205-D-316-P
VG-205-D-316-S
VG-205-D-14-P
VG-205-D-14-S
5.30
(Single slot)
90
Stainless
Plated Thickness
3/16
3/16
1/4
1/4
3.15
2.0
.50
.41
1.5
205-E
Long
Angle Bracket
.42
3/16 or 1/4
Part Number
3.41
VG-205-E-316-P
VG-205-E-316-S
VG-205-E-14-P
VG-205-E-14-S
7.75
(Double slot)
es 8"
Match
guide
" bead rns
e
and 10
le patt
bolt ho
Stainless
Plated Thickness
3/16
3/16
1/4
1/4
2.41
90
3.25
Note: Dimensions shown are nominal for 1/4 inch thick brackets.
297
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
.50
cL
VG-016-01
VG-205-A
VG-011-01
1.5
1.5
VG-205-B
Bracket lateral
adjustment is
1.5 inches in
either direction.
3/8
VG-205-C
VG-205-HDW-02-P38
VG-205-C
3/8
STYLE
"AC"
STYLE
"BC"
STYLE
"AB"
STYLE
"CC"
STYLE
"BB"
STYLE
"DC"
STYLE
"DB"
VG-205-AC-18-P
VG-205-AC-18-S
VG-205-AC-316-P
VG-205-AC-316-S
VG-205-AC-14-P
VG-205-AC-14-S
2
3
4
VG-205-BC-18-P
VG-205-BC-18-S
VG-205-BC-316-P
VG-205-BC-316-S
VG-205-BC-14-P
VG-205-BC-14-S
VG-205-BB-18-P
VG-205-BB-18-S
VG-205-BB-316-P
VG-205-BB-316-S
VG-205-BB-14-P
VG-205-BB-14-S
5
6
VG-205-AB-18-P
VG-205-AB-18-S
VG-205-AB-316-P
VG-205-AB-316-S
VG-205-AB-14-P
VG-205-AB-14-S
VG-205-CC-18-P
VG-205-CC-18-S
VG-205-CC-316-P
VG-205-CC-316-S
VG-205-CC-14-P
VG-205-CC-14-S
VG-205-DC-316-P
VG-205-DC-316-S
VG-205-DC-14-P
VG-205-DC-14-S
C
1
VG-205-DB-316-P
VG-205-DB-316-S
VG-205-DB-14-P
VG-205-DB-14-S
Brackets &
Positioning
3/8
carriage bolt
Part Number
VG-205-HDW-03-P38
VG-205-HDW-03-S38
Material
P
S
RH-30-BK-FS3816
or
RH-30-BK-FP3816
Optional
Hardware Kit
Part Number
VG-205-HDW-02-P38
VG-205-HDW-02-S38
3/8 carriage bolt
298
To order: Determine the style required from the chart above then select the part number based on the material type
and thickness. Example: VG-205-AB-316-P = A top / B bottom, 3/16 inch thick material, zinc plated.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Material
P
S
Rod Mounts
Rod
Rod
.41
.38
Rod
.
typ
1.5
1.0
RH-30
Ratchet Handle
641T
Rod Mounts
Used for conveyor lane
dividing applications or
other rod adjustment situations. Positioning tabs
lock the rod to bracket
slots at 90.
Rod
VG-641T-K-12
VG-641T-K-58
VG-641T-K-34
1/2
5/8
*3/4
Rod
Part Number
Rod
VG-641T-N-12
VG-641T-N-58
VG-641T-N-34
Part Number
1/2
5/8
*3/4
VG-641T-R-12
VG-641T-R-58
VG-641T-R-34
Rod
.41
1.5
Rod
1/2
5/8
*3/4
Rod
.
typ
1.0
641
RH-30
Ratchet Handle
Rod Mounts
Rod
1/2
5/8
*3/4
Rod
VG-641-N-12
VG-641-N-58
VG-641-N-34
Part Number
1/2
5/8
*3/4
VG-641-R-12
VG-641-R-58
VG-641-R-34
Rod
1/2
5/8
*3/4
1.0
0.32
max.
thickness
VG-641T-K(with tabs)
1.50
VG-641-K(without tabs)
299
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
to SpeedSet brackets.
201
Fixed Guide Rail Bracket
.5
1.5
.5
.5
1.5 3.5
Min. Max.
1.5
1.5
5/16
all slots
11.5
2.25
1.5
9.5
8.0
1.0
1.0
1.0
1.5 3.5
Min. Max.
1.5
1.5 3.5
Min. Max.
1.5
1.0
1.0
.5
.5
.5
.56
.56
1.71
1.71
Stainless
1.5 3.5
Min. Max.
1.5
1.0
.56
VG-201-P08
VG-201-S08
1.5
1.0
2.0
Part Number
1.75 4.75
Min. Max.
1.75
1.0
Plated
Length
8
8
Part Number
Stainless
VG-201-P095
VG-201-S095
1.71
Plated
Length
9.5
9.5
Part Number
Stainless
VG-201-P115
VG-201-S115
Plated
Length
11.5
11.5
204
Adjustable Support Bar
Support for guide rail. The new 204-D series support
bar features an extended slot for greater adjustability.
VG-201-P08
VG-204-B
Brackets &
Positioning
VG-204-A
1.50
.41
1.50
.41
3/8
1.50
.41
3/8
3/8
2.00
4.13
2.00
.87
8.00
8.00
1.75
6.50
1.50
.87
.63
2.00
1.75
.50
Part Number
VG-204-A316-P
VG-204-A316-S
VG-204-A14-P
VG-204-A14-S
.50
.188
or .25
3/16
3/16
1/4
1/4
8
8
8
8
2.00
Part Number
VG-204-B316-P
VG-204-B316-S
VG-204-B14-P
VG-204-B14-S
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
300
.50
.188
or .25
3/16
3/16
1/4
1/4
6.5
6.5
6.5
6.5
Part Number
VG-204-D316-P
VG-204-D316-S
VG-204-D14-P
VG-204-D14-S
.188
or .25
3/16
3/16
1/4
1/4
8
8
8
8
.51
1.22
3.05
13809
6.06
13809
.55
1.77
3.05
Part Number
2.19
Fixed Side
Guide Bracket
1.02
.41
.47
1.22
Mounting Bar
See Related
Products
7.5
1.0
VG-022-01
6.0
4.5
6.0
7.5
9.0
VG-204F-
2.0
2.0
1.8
1.8
1.8
4.5
2.0
.7
.81
Adjusting Rod
Protective Caps
Can be used on all
VG-020, VG-212 and
VG-232 adjusting rods.
Length
VG-204F-45-316S
VG-204F-60-316S
VG-204F-75-316S
VG-204F-90-316S
9.0
.42
200
Part Number
5/8
1/2
VG-200-4
VG-200-5
.60
Part Number
Color
Rod
VG-200-4Y
VG-200-4R
VG-200-5Y
VG-200-5R
Y
R
Y
R
1/2
1/2
5/8
5/8
.40
200-225
2.25
Safety Cap
Provides personnel
protection from
exposed rod ends.
1/2
or
5/8
VG-200-225-12-B
VG-200-225-58-B
Rod
1/2
5/8
.70
301
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
204F
770-B
770-A
.16
770-C
770-D
.16
.16
.16
H
H
1.3
2.8
1.3
1.3
1.4
2.8
2.8
1.4
1.4
1.4
1.3
Material: Polyamide spacer block with 304 stainless steel wire holder.
Part Number
H (in.)
7
10
12
Part Number
VG-770-B-L250
VG-770-B-L300
H (in.)
Part Number
10
12
VG-770-C-L180
VG-770-C-L250
Brackets &
Positioning
VG-770-A-L180
VG-770-A-L250
VG-770-A-L300
771
Drip Pan
Mounting Washer
1.6
.40 .93
.51
.16
.32
VG-771-M10
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
302
H (in.)
7
10
Part Number
VG-770-D-L180
VG-770-D-L300
H (in.)
7
12
90
The unique design of the 621 series cross blocks does not rely on
set screws that can score and mar adjusting rods and subsequently
hinder movement. Instead, we use an eyelet which rmly clamps
around the adjusting rod for superior holding strength. Independent
rod adjustment makes the 621 series easy to work with. Knob versions do not require any tools for adjustment. Variations on the cross
block design include optional lock washer and nut tightening, stainless steel body designs, and 45 cross rod angles.
VG-031-12
New improved
621 Cross Blocks
are functionally
superior and more
cost effective!
VG-022-01
Rail Clamp
Old style
VG-620 assembly
VG-SSR
Guide Rail
Brackets &
Positioning
90
Polyamide knobs
function independently
for precise adjustment.
Rigid polyamide
body accepts 1/2
and 5/8 rods.
303
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
621 series
2.0
1.31 1.41
1.23
Cross Blocks
Connects two round rods at 90.
Versions available to hold 1/2 and
5/8 inch rods. Standard VG-621
cross blocks come with hand knobs
on each side for quick adjustment.
.66
1.0
2.31
Part Number
with 2 Knobs
Part Number
with 2 Nuts
VG-621-12-12
VG-621-12-58
VG-621-58-58
VG-621NK-12-12
VG-621NK-12-58
VG-621NK-58-58
Rod X Rod
VG-621NN-12-12
VG-621NN-12-58
VG-621NN-58-58
1/2
1/2
5/8
1/2
5/8
5/8
3.70
3.40
621S series
Stainless Steel Cross Blocks
Brackets &
Positioning
4.2
2.0
1.25
.66*
1.0**
2.31
*.60 and **1.13 for 5/8 x 3/4 and 3/4 x 3/4 cross blocks
45
inless
All Sta mp
Hi-Te
Material: 304 stainless steel body, polyamide knobs with brass inserts. Stainless steel hardware.
Part Number
with 2 Knobs
Part Number
with 2 Nuts
Part Number
with 2 Knobs, 45
Part Number
with 2 Nuts, 45
VG-621S-12-12
VG-621SNK-12-12
VG-621SNN-12-12
VG-621S-45-12-12R
VG-621SNK-45-12-12R
VG-621SNN-45-12-12R
1/2
VG-621S-12-58
VG-621SNK-12-58
VG-621SNN-12-58
VG-621S-45-12-58R
VG-621SNK-45-12-58R
VG-621SNN-45-12-58R
1/2
5/8
VG-621S-58-58
VG-621SNK-58-58
VG-621SNN-58-58
VG-621S-45-58-58R
VG-621SNK-45-58-58R
VG-621SNN-45-58-58R
5/8
5/8
VG-621S-12-34
VG-621SNK-12-34
VG-621SNN-12-34
5/8
3/4
VG-621S-38-34
VG-621SNK-38-34
VG-621SNN-38-34
3/4
3/4
VG-621S-34-34
VG-621SNK-34-34
VG-621SNN-34-34
3/4
3/4
3.9
3.6
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
4.2
304
3.9
3.6
Rod X Rod
1/2
Cross Blocks
Rapid and precise adjustments of guides
to accommodate various bottle sizes.
Fits 1/2 inch. diameter adjusting rods.
Corrosion resistance composite components.
Ergonomic spring loaded design.
Quick and easy maintenance.
Twist
to Lock, twist
back to unlock
1/2 round or
7/16 square rod
33313
Quick Ajust
Cross Blocks
1.55
1.38
1.18
1.38
4.72
1.57
0.79
Sq.
0.11
33313
Rod Rod
(in.) X (in.)
1/2
1/2
Sq.
0.16 inch.
0.5 Rod
7/16
33262
Quick Ajust
Cross Blocks
1.06
1.65
1.55
5.31
1.38
1.18
1.57
.25
1.00
0.11
0.16 inch.
0.5 Rod
0.98
DIA 0.98
13182
Cross Blocks
0.91
2.13
3.94
0.91
Rod (in.)
13182
1/2
305
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
620
Part Number
For 1/2,
5/8, 3/4 rod
Rod to Rod
Cross Block
Connects two round
rods at 90.
1.13
1.13
2.88
VG-620-12-12
VG-620-12-58
VG-620-58-58
VG-620-34-34
Rod
Rod
1/2
1/2
5/8
3/4
1/2
5/8
5/8
3/4
1.0
Part Number
620-12SQ
For 1/2, 5/8, 3/4 rod
Rod to Square
Rod Cross Block
1.13
VG-620-12SQ-12
VG-620-12SQ-58
VG-620-12SQ-34
Sq. Rod
Rod
1/2
1/2
1/2
1/2
5/8
3/4
1.13
2.88
VG-620-
1.0
620-716HX
For 1/2 dia. rod
1.13
Part Number
1.13
VG-620-716HX-12
Hex. Rod X
Rod
7/16
1/2
619
2.11
.83
.83
Rod to Rod
Cross Block
.63
Part Number
VG-619-10M
VG-619-12M
VG-619-14M
1.59
335 series
Lane Divider
Cross Blocks
Support
Rod (mm)
10mm/8mm sq.
12mm/10mm sq.
14mm/12mm sq.
1.24
1.38
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
2.05
2.36
Brackets &
Positioning
2.88
4.88
306
Part Number
Rod
33512
33509
1-1/2
1-1/2
Rod
5/8
3/4
335HV
2.36
4.37
Lane Divider
Cross Blocks
with 2 Handles
4.88
2.05
1.24
1.38
1.59
3.15
Rod
33512HV
33509HV
1-1/2
1-1/2
Rod
5/8
3/4
623
Lift handle to
disengage
.69
.69
Ratchet Handle
Replaces fastener for
easier adjustment. Used
with VG-620 Cross Block.
(Note: VG-621 Cross
Blocks are functionally
superior and more cost
effective!)
.33
2.0
2.3
Part Number
Thread
VG-623-BK
1/4-20
612
Sensor Mount
Accurately positions
sensors and reflectors.
Use with VG-022-01 rail
clamp for ideal sensor
mounting and quick
adjustment, above or
below guide rail.
.13
.86
3.5
5.0
R .50
(both ends)
Part Number
VG-612-35-12
VG-612-35-18
VG-612-50-12
VG-612-50-18
Length(in.) Sensor(mm)
3.5
3.5
5
5
12
18
12
18
VG-022
pg. 206
VG-SSR
307
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
Part Number
Accessory Holders
VG-629
VG-628
VG-627
627
Part Number
Brackets &
Positioning
Molded T-Rod
.25
VG-627-30-12
VG-627-45-12
VG-627-80-12
3.0",
4.5"
or 8.0"
3.0
4.5
8.0
1/2
1/2
1/2
Patent Numbers
6,427,829 B1
6,591,978
VG-627
1.16
VG-627S
1.5
2.38
cL
1.07
.75
1.5
627S
Material: Polyamide.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Part Number
VG-627S-34
308
Thickness (in.)
3/4
Accessory Holders
628
Accessory Holder
This unique stainless steel and molded plastic design is a strong, yet economical method
for holding many types of accessories. A
variety of bore sizes are available.
Part Number
VG-628-35-12-14
VG-628-35-12-38
VG-628-35-12-12
VG-628-35-12-58
VG-628-35-12-34
VG-628-50-12-14
VG-628-50-12-38
VG-628-50-12-12
VG-628-50-12-58
VG-628-50-12-34
.31
D
.50
1.17
.25
3.5" or 5"
.97
629
2.35
Rod
Length (in.)
Rod (in.)
Accessory
Hole (D)
3.5
3.5
3.5
3.5
3.5
5.0
5.0
5.0
5.0
5.0
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
.25
.38
.50
.63
.75
.25
.38
.50
.63
.75
Patent No.
6,591,978
.57
.07
Cross Clamp
Stainless steel clamp
used to connect two
1/2 inch round rods
at 90. Fastening
hardware is included.
1.03
VG-629-12-12
1/2
1/2
629R
Rotating
Cross Clamp
Part Number
VG-629R-12-12
1/2
1/2
VG-621
VG-202L
2.0
2.37
2.35
.59 .57
1.03
309
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
VG-629R-12-12
33616
Part Number
Rod (in.)
33616
Universal Mount
for Photocells or
Reflectors
1/2
1.53 0.43
2.56
1.14
0.27
1.57
1.59
2.05
0.73
1.15
3.12
3.49
OMRON E3S-DS30B
3.40
PRK 95 LEUZE
2.62
2.93
PRK 46 LEUZE
3.26
WT12 SICK
OMRON E3N-R5H4
1.96
2.66
1.48
3.80
1.36
3.11
3.64
2.13
0.47
3.11
WL36 SICK
3.61
PRK 18 LEUZE
1.17
0.73
1.77
0.67
Brackets &
Positioning
1.68
2.82
3.78
2.15
2.82
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
3.26
310
0.96
4.84
1.89
0.31
Rod
0.51
1.50
1.26
2.44
1.18
4.33
Max recommended
tightening torque 14.4 ft-lbs.
2.16
1.89
33500
Part Number
Rod (in.)
33500
1/2
3.54
1.26
0.47
2.95
1.50
Rod
0.57
2.05
0.91
1.77
0.12
2.24
2.68
2.95
2.95
2.95
0.28
0.27
1.00
0.57
1.00
0.57
0.57
1.00
1.00
Position - B
Position - A
Position - C
13150
Part Number
13150
Bottle Indicator
Used to activate photocells
on conveyors and machines.
3.39
5.59
1.18
0.57
2.20
0.16
0.16
1.18
311
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
0.98
.72
1.0
614
.23
.31
Reflector Mount
Used to hold reflectors
using a cap screw and nut
or press-in clip onto 1/2
inch support rods.
.70
.31
#10-32
for 1/2 in. rod
Part Number
Rod (in.)
VG-614-12
1/2
2.30
Reflector with bolt and nut
.72
1.0
Part Number
618
.70
.31
numerous bore
sizes available
Accessory Holder
Used to hold many types
of accessories onto 1/2
inch support rods. A variety
of bore sizes are available.
VG-618-12-14
VG-618-12-38
VG-618-12-12
VG-618-12-58
VG-618-12-34
#10-32
for 1/2 in. rod
1.17
Support
Rod (in.)
Accessory
Bore (in.)
1/2
1/2
1/2
1/2
1/2
1/4
3/8
1/2
5/8
3/4
2.30
.71
617
#10-32
.40
Brackets &
Positioning
T-Clamp
Part Number
Rod (in.)
VG-617-12
1/2
.78
Mounts to side of
equipment to provide
support for light duty
rod type guide rail
systems. Part of the
VG-615 series accessory
holder assembly.
.25
1.12
VG-620
VG-614
1.18
1.59
2.24
VG-617
215
Support Rods
Available in three lengths,
these rods can be used with
accessory cross blocks,
holders and clamps. They are
made from 1/2 and 5/8 inch
OD stainless steel tubing. The
ends are capped with a black
polyethylene plug.
1/2" Part
Number
1/2 or
5/8
(End caps
on both ends)
312
Length (in.)
VG-215-06-12T VG-215-06-58T
VG-215-09-12T VG-215-09-58T
VG-215-12-12T VG-215-12-58T
6, 9, 12 in.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
5/8" Part
Number
6
9
12
6"
615R
Reflector
Mounting Assembly
The assembly for holding
reflectors is available with
1/2 inch support rods and
corresponding attachments.
VG-620
Cross Block
6"
Part Number
VG-615R-12
1/2
VG-617
T-Clamp
VG-614
Reflector
Mount
615A
Sensor
Mounting Assembly
Part Number
VG-615A-12-14
VG-615A-12-38
VG-615A-12-12
VG-615A-12-58
VG-615A-12-34
6"
Variable
bore size
VG-620
Cross Block
Accessory
Holder
Bore (in.)
1/2
1/2
1/2
1/2
1/2
1/4
3/8
1/2
5/8
3/4
6"
Brackets &
Positioning
VG-618
Accessory
Holder
Support
Rod (in.)
VG-617
T-Clamp
313
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.0
614-10M
Reflector Mount
M5
for 10mm rod
or 8mm sq. rod
.23
.31
.70
.31
Part Number
Rod (mm)
VG-614-10M
10mm/8mm sq.
2.30
Reflector with bolt and nut
.72
1.0
618-10M
Accessory Holder
numerous bore
sizes available
VG-618-10M-6
VG-618-10M-10
VG-618-10M-12
VG-618-10M-16
VG-618-10M-19
.70
.31
1.17
Support
Rod (mm)
Accessory
Bore (mm)
10mm/8mm sq.
10mm/8mm sq.
10mm/8mm sq.
10mm/8mm sq.
10mm/8mm sq.
6
10
12
16
19
Part Number
M5
2.30
.71
for 10mm rod
or 8mm sq. rod
M5
617-10M
Part Number
.40
.78
T-Clamp
.25
VG-617-10M
Support
Rod (mm)
10mm/8mm sq.
1.12
1.18
Brackets &
Positioning
1.59
2.24
619-10M
2.11
.83
.83
M5
.63
Part Number
VG-619-10M
Support
Rod (mm)
10mm/8mm sq.
616
10mm
Support Rod
This 10mm OD stainless steel
tube can be used with accessory cross blocks, holders and
clamps. The ends are capped
with a black polyethylene plug.
Part Number
4,6 or 8 in.
10mm 8mm
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
(End caps
on both ends)
314
VG-616-04-10M
VG-616-06-10M
VG-616-08-10M
Length (in.)
4
6
8
6"
615R-10M
Reflector
Mounting Assembly
The assembly for holding
reflectors is available with
10mm support rods and
corresponding attachments.
VG-619-10M
Cross Block
6"
Part Number
Support Rod
VG-615R-10M
VG-614-10M
Reflector
Mount
10mm
VG-617-10M
T-Clamp
VG-616-10M
10mm
support rods (2)
Sensor
Mounting Assembly
Part Number
6"
Variable
bore size
VG-619-10M
Cross Block
VG-618-10M
Accessory
Holder
6"
VG-615A-10M-6
VG-615A-10M-10
VG-615A-10M-12
VG-615A-10M-16
VG-615A-10M-19
Support
Rod (mm)
Accessory
Bore (mm)
10mm
10mm
10mm
10mm
10mm
6
10
12
16
19
VG-617-10M
T-Clamp
VG-616-10M
10mm
support rods (2)
315
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Brackets &
Positioning
615A-10M
SC
Locking Shaft Collars
Brackets &
Positioning
Shaft Collars
can be used
with brackets.
See page 268.
Easy to
install on
existing
lines!
Shaft
C
Material: Polyamide ring with stainless steel and nickel plated
brass hardware.
SCK
Available
with keyway
Locking Shaft
Collars with Keyway
For holding sprockets or
idler wheels on keyed shafts.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
316
Part Number
with keyway
Shaft
keyway
VG-SC-12
VG-SC-58
VG-SC-34
VG-SC-100
VG-SC-125
VG-SC-150
VG-SCK-100
VG-SCK-125
VG-SCK-150
1.10
1.22
1.50
1.75
2.00
2.50
1/2"
5/8"
3/4"
1"
1-1/4"
1-1/2"
.46
.46
.55
.55
.63
.70
1/4"
1/4"
3/8"
Material Handling
Components
Section Overview
Roll-Tech Page
318
Standard Roller
Selection Page
324
Custom Roller
Selection Page
328
320
338
6
inches wide
9
inches wide
12
Conveyor Rollers
inches wide
3/4 inch
1.96
9" roller
6" roller
.05
1.15
12" roller
.32
7.44
10.44
13.44
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
318
L
W
Length (L)
in Feet
VG-ARB-AL34-BB-6-5
VG-ARB-AL34-BB-6-10
VG-ARB-AL34-BB-9-5
VG-ARB-AL34-BB-9-10
VG-ARB-AL34-BB-12-5
VG-ARB-AL34-BB-12-10
6
6
9
9
12
12
5
10
5
10
5
10
VG-ASRB-AL34-BB-6-5
VG-ASRB-AL34-BB-6-10
VG-ASRB-AL34-BB-9-5
VG-ASRB-AL34-BB-9-10
VG-ASRB-AL34-BB-12-5
VG-ASRB-AL34-BB-12-10
6
6
9
9
12
12
5
10
5
10
5
10
VG-ARB-SS34-BB-6-5
VG-ARB-SS34-BB-6-10
VG-ARB-SS34-BB-9-5
VG-ARB-SS34-BB-9-10
VG-ARB-SS34-BB-12-5
VG-ARB-SS34-BB-12-10
6
6
9
9
12
12
5
10
5
10
5
10
VG-ASRB-SS34-BB-6-5
VG-ASRB-SS34-BB-6-10
VG-ASRB-SS34-BB-9-5
VG-ASRB-SS34-BB-9-10
VG-ASRB-SS34-BB-12-5
VG-ASRB-SS34-BB-12-10
6
6
9
9
12
12
5
10
5
10
5
10
Part Number
ARB-AL
Mini Roller Conveyor with
Aluminum Rollers
Roller body diameter is .75 inches. Available in
5 or 10 ft. lengths, and 6, 9, or 12 inch widths.
Ball bearing roller ends.
ASRB-AL
Mini Roller Conveyor with Side
Guides and Aluminum Rollers
Roller body diameter is .75 inches. Available in 5
or 10 ft. lengths, and 6, 9, or 12 inch widths. Ball
bearing roller ends.
ARB-SS
Mini Roller Conveyor with
Stainless Steel Rollers
Roller body diameter is .75 inches. Available in
5 or 10 ft. lengths, and 6, 9, or 12 inch widths.
Ball bearing roller ends.
ASRB-SS
Mini Roller Conveyor with Side
Guides and Stainless Steel Rollers
Roller body diameter is .75 inches. Available in 5 or
10 ft. lengths, and 6, 9, or 12 inch widths. Ball bearing
roller ends.
Side Channels
(with or without side guides)
Cross member
mounting bracket
Mounting is simple with special slots on
each cross member.
319
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Rollers
Rollers
(aluminum or stainless steel)
Return Rollers
Sanitary, watertight, sealed
Excellent wear and chemical resistance
Low noise, low friction
Our conveyor chain return rollers are made from impact resistant material. They
are highly resistant to chemicals and have self lubricating characteristics. A
urethane sleeve or ribbed rubber cover option is available for better
traction, low noise, and long service life. Other options
include a completely solid version, plus side
flanges for each type of roller.
3.25
Part Number
R3-18-50
R3-18-60
R3-75-50
R3-75-60
R3-20-50
R3-20-60
R3
Return Roller
3.15
Part Number
1.61
R15-18-50
R15-18-60
R15-75-50
R15-75-60
R15-20-50
R15-20-60
R15
Return Roller
1.97
2.36
1.97
2.36
1.97
2.36
1.97
2.36
1.97
2.36
1.97
2.36
For Use
With
20 mm
Dia. Shaft
F
Flange
Dia.
E
Roller
Dia.
2.56
2.95
2.56
2.95
2.56
2.95
1.97
2.36
1.97
2.36
1.97
2.36
For Use
With
20 mm
Dia. Shaft
F
Flange
Dia.
E
Roller
Dia.
2.56
2.95
2.56
2.95
2.56
2.95
1.97
2.36
1.97
2.36
1.97
2.36
1.48
Part Number
Return
Roller
with Flange
RF3
F
1.69
Part Number
RF15
F
Return Roller
with Flange
RF3-18-50
RF3-18-60
RF3-75-50
RF3-75-60
RF3-20-50
RF3-20-60
For Use
With
3/4 in.
Dia. Shaft
3.15
Conveyor Rollers
3.38
For Use
With 18 mm
or 11/16 in.
Dia. Shaft
1.51
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
320
RF15-18-50
RF15-18-60
RF15-75-50
RF15-75-60
RF15-20-50
RF15-20-60
For Use
With 18 mm
or 11/16 in.
Dia. Shaft
For Use
With
3/4 in.
Dia. Shaft
Return Rollers
Material: Impact resistant, green HDPE with urethane cover.
3/4" roller is orange HDPE.
3.25
R3U
Part Number
R3U-18-50
R3U-18-60
R3U-75-50
R3U-75-60
R3U-20-50
R3U-20-60
Return Roller
with Urethane
Surface
3.15
2.21
2.60
2.21
2.60
2.21
2.60
1.61
R15U
Part Number
R15U-18-50
R15U-18-60
R15U-75-50
R15U-75-60
R15U-20-50
R15U-20-60
E
1.48
3.38
RF3U
E
Return Roller
with Flange
and Urethane
Surface
Part Number
3.15
RF15U
Part Number
1.51
For Use
With 18 mm
or 11/16 in.
Dia. Shaft
For Use
With
3/4 in.
Dia. Shaft
For Use
With
20 mm
Dia. Shaft
F
Flange
Dia.
E
Roller
Dia.
2.56
2.95
2.56
2.95
2.56
2.95
2.21
2.60
2.21
2.60
2.21
2.60
For Use
With
20 mm
Dia. Shaft
F
Flange
Dia.
E
Roller
Dia.
2.56
2.95
2.56
2.95
2.56
2.95
2.21
2.60
2.21
2.60
2.21
2.60
For Use
With 18 mm
or 11/16 in.
Dia. Shaft
For Use
With
3/4 in.
Dia. Shaft
3.25
Part Number
R3B
Return Roller
with Rubber
Surface
2.21
2.60
2.21
2.60
2.21
2.60
RF15U-18-50
RF15U-18-60
RF15U-75-50
RF15U-75-60
RF15U-20-50
RF15U-20-60
Return Roller
with Flange
and Urethane
Surface
RF3U-18-50
RF3U-18-60
RF3U-75-50
RF3U-75-60
RF3U-20-50
RF3U-20-60
1.69
3.15
1.61
R15B
R3B-18-50
R3B-18-60
R3B-75-50
R3B-75-60
R3B-20-50
R3B-20-60
Part Number
Return Roller
with Rubber
Surface
1.48
321
R15B-18-50
R15B-18-60
R15B-75-50
R15B-75-60
R15B-20-50
R15B-20-60
1.97
2.36
1.97
2.36
1.97
2.36
1.97
2.36
1.97
2.36
1.97
2.36
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Rollers
Return Roller
with Urethane
Surface
Return Rollers
Material: Impact resistant, green HDPE with rubber cover.
3/4" roller is orange HDPE.
3.38
RF3B
Part Number
RF3B-18-50
RF3B-18-60
RF3B-75-50
RF3B-75-60
RF3B-20-50
RF3B-20-60
Return Roller
with Flange
and Rubber
Surface
3.15
1.69
RF15B-18-50
RF15B-18-60
RF15B-75-50
RF15B-75-60
RF15B-20-50
RF15B-20-60
Return Roller
with Flange
and Rubber
Surface
1.51
1.97
2.36
1.97
2.36
1.97
2.36
Part Number
RF15B
2.56
2.95
2.56
2.95
2.56
2.95
2.56
2.95
2.56
2.95
2.56
2.95
1.97
2.36
1.97
2.36
1.97
2.36
3.25
Part Number
RP3-18-50
RP3-18-60
RP3-75-50
RP3-75-60
RP3-20-50
RP3-20-60
RP3
Solid
Return Roller
3.15
1.97
2.36
1.97
2.36
1.97
2.36
Part Number
3.25
RP3B
E
Solid Return
Roller with
Rubber Surface
RP3B-18-50
RP3B-18-60
RP3B-75-50
RP3B-75-60
RP3B-20-50
RP3B-20-60
3.15
1.97
2.36
1.97
2.36
1.97
2.36
Conveyor Rollers
4.5
RF
Roller Flange
1.97
3.25
Part Number
RF-18-70
RF-75-70
RF-20-70
.08
2.75
2.75
2.75
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
322
3.35
.10
1.97
3.25
1.97
3.25
.08
3.35
1.97
.10
3.25
Roller Selection
Our rollers have many varying configurations and material types. Combine this with our custom roller capability, and it
becomes necessary to provide some information to help you select the perfect roller for your needs. Conveyor rollers are usually used on either gravity (no power) systems, or on powered systems that use a belt, chain or sprocket to drive the roller.
Driven Systems
Gravity Systems
Sleeve Bearings
Ball Bearings
Roller Tubes
Roller Tubes
End Plugs
End Plugs
Sleeve Bearings
Ball Bearings
Roller Shafts
Roller Shafts
Conveyor Rollers
323
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
lf"
f The She
"Of
1.90"
1/8" nominal
APS
PVC Roller with
Sleeve Bearings
Roller body diameter is 1.9 inches.
Sleeve bearing material is long
lasting Nyla-Ride. Available in 8
standard lengths. To modify this
roller, see Type A on page 328.
Part Number
APS-3.5
APS-4.8
APS-7.8
APS-10.3
APS-13
APS-16
APS-18
APS-22
1/2"
Sleeve
Bearing
End Plug
Chain/Roller width
BF
3.25
4.5
7.5
10
-
3.50
4.75
7.75
10.25
13
16
18
22
APS12
Conveyor Rollers
End Plug
1/2" Round Shaft
APS7
7/16" Hex Shaft
End Plug
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
324
Part Number
Chain/Roller width
BF
APS12-7.8
APS12-10.3
APS12-13
APS12-16
APS12-18
APS12-22
7.5
10
-
7.75
10.25
13
16
18
22
Chain/Roller width
BF
APS7-7.8
APS7-10.3
APS7-13
APS7-16
APS7-18
APS7-22
7.5
10
-
7.75
10.25
13
16
18
22
BPS12
PVC Roller with
Sleeve Bearings
1/2"
1-1/2"
deep
Sleeve
Bearing
End Plug
DPL7
7/16"
Hex Shaft
Ball
Bearing
ICD7
3.50
4.75
7.75
10.25
13
16
18
22
Part Number
BF
DPL7-7.8
DPL7-10.3
DPL7-13
DPL7-16
DPL7-18
DPL7-22
7.75
10.25
13
16
18
22
Part Number
BF
ICD7-10.3
ICD7-13
ICD7-16
ICD7-18
ICD7-22
ICD7-24
ICD7-28
10.3
13
16
18
22
24
28
325
Part Number
BF
ICG7-10.3
ICG7-13
ICG7-16
ICG7-18
ICG7-22
ICG7-24
ICG7-28
10.3
13
16
18
22
24
28
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Rollers
7/16"
Hex Shaft
ICG7
BF
3.25
4.5
7.5
10
-
Chain/Roller width
BPS12-3.5
BPS12-4.8
BPS12-7.8
BPS12-10.3
BPS12-13
BPS12-16
BPS12-18
BPS12-22
Part Number
Roller Selection
Solus offers a line of conveyor rollers and
components which are engineered to provide
totally maintenance free service. These rollers
are quiet, need no lubrication, are extremely
corrosion resistant, and can be used in wet
applications. Contamination does not readily adhere to the surface of our rollers, which
helps to keep the conveyor clean and trouble-
Letter
Identification
PVC Rollers
A,G,H
Metal Core
Rollers
C,N
Metal Rollers
PVC Rollers
B,F
PVC Rollers
Metal Rollers
PVC Rollers
Metal Core
Rollers
M, U
Metal Rollers
PVC Rollers
Metal Core
Rollers
T, U
High Speed
Ball Bearings
PVC Rollers
Sleeve
Bearing
PVC Rollers
Ball Bearing
PVC Rollers
Double Sprocket
PVC Rollers
Single Sprocket
PVC Rollers
Thru Bore
Sleeve Bearing
Rollers
Blind Bore
Sealed End
Ball Bearings
Standard
Rollers
Ball Bearing
Rollers
Standard
Ball Bearings
Conveyor Rollers
High Speed
Ball Bearings
Belt Driven
Rollers
Specialty
Rollers
Tapered
Rollers
Sprocket Driven
Rollers
Roller Components
Roller Type
A B C D E F G H I J K L M N P Q S T U V
7/16 hex
5/16 hex
Shape
1/2 round
5/8 round
1/4 round
Other round
Material
Carbon steel
304 stainless
316 stainless
Through (included)
.81
Diameter
Roller
Material
1.06
1.19
1.31
1.66
1.90
2.25
2.38
2.50
2.88
PVC
Aluminum
UHMW
Stainless steel
Carbon steel
Urethane
Tapered
With sprocket
Sleeve
Nolu-S UHMW
Nyla-Ride
Arguto-K wood
Acetal
UHMW
Ball, sealed
Material
Ball
Bearing
Grooved
Type
327
2.0 inches
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Rollers
Shaft
Rollers
Type A
Side
Frame
Side
Frame
Roller
Dia.
13/16"
Rigid PVC
1/8"
Our most popular all plastic roller, designed for belt driven conveyors and inclined gravity systems.
Standard shafts extend 13/16" at each end of a roller. Custom extended shaft lengths are available.
This roller can be purchased without a shaft if you prefer (leave shaft information out of part number).
Roller material: beige, rigid PVC.
End plug material: beige ABS.
Bearing Type:
Bore Type:
Roller Material:
Sleeve
Shaft Material
Part No. Description
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
Through
PVC
Roller Diameter
Part No. Description
R220
1.90"
R250
2.25"
R270
2.38"
R280
2.50"
R320
2.88"
Bearing Material
Part No. Description
S
Nolu-S
Distance
Between
Frames
A-7/16hexA-1/2
Type B
PVC Roller with High
Performance Blind
Bore Sleeve Bearing
Side
Frame
1-1/2"
Side
Frame
13/16"
5/16"
hex bolt
Rigid PVC
Roller
dia.
Stub shaft
dia.
1-1/2"
1/8" nominal
Conveyor Rollers
Designed for belt driven conveyors and inclined gravity systems where added cleanliness is
required. The blind bore sleeve bearing can accommodate a 1/2" or 5/8" stainless steel stub
shaft or extended pin chain attachments. The standard roller is bored to suit part number
CRP-0824SS which is 1/2" dia., 316 stainless steel, and can be bolted to your side frame.
Bearing Type:
Sleeve
Bore Type:
Blind
Roller Material:
PVC
1/2"
5/8"
Roller Diameter
Part No.
Description
R220
1.90"
R250
2.25"
R270
2.38"
R280
2.50"
R320
2.88"
BCopyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
328
Bearing Material
Part No. Description
S
Nolu-S
Distance
Between
Frames
Rollers
Type C
UHMW Roller with
High Performance
Sleeve Bearing
Side
Frame
16 guage aluminum
1/8" wall UHMW
Roller
dia.
Side
Frame
13/16"
Bearing Type:
Bore Type:
Our UHMW roller, reinforced with an aluminum tube, offers maximum abrasion resistance. Designed primarily
for belt driven conveyors, the plastic sleeve bearings is an excellent choice for applications exposed to
abrasive or corrosive products, candy production or printing where a non-stick surface is required. Standard
shafts extend 13/16" at each end of a roller. Custom extended shaft lengths are available.
Sleeve
Through
UHMW
covered aluminum
Roller Material:
Shaft Diameter
Description
Part No.
7/16 hex 7/16" hex
5/16 hex 5/16" hex
1/2
1/2" round
Shaft Material
Part No. Description
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
Roller Diameter
Part No. Description
R220
1.90"
R270
2.38"
Bearing Material
Part No. Description
S
Nolu-S
Distance
Between
Frames
CC-
w/ round shaft
Type D
PVC Roller with Nolu
Plastic Ball Bearing
Side
Frame
Roller
dia.
13/16"
Side
Frame
Rigid PVC
A cost effective lighter duty roller designed primarily for gravity conveyor applications. Standard shafts
extend 13/16" at each end of a roller. Custom extended shaft lengths are available.
Roller material: beige, rigid PVC.
Bearing Type:
Bore Type:
Roller Material:
Ball
Through
Shaft Material
Description
Part No.
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
PVC
Distance
Between
Frames
D329
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Rollers
1/8" nominal
Rollers
Side
Frame
Type E
PVC Roller with
Sealed End
Ball Bearing
Side
Frame
Roller
dia.
Rigid PVC
M8
1/8" nominal
Our low friction roller with sealed end bearings prevents fluids and other contaminants from entering the
tube. Useful in the processing industry due to the corrosion resistant materials that are USDA accepted for
incidental contact with food products. Spring loaded, stainless steel stub shafts ease the assembly into a
frame capable of accepting the M8 threaded attachments,
Roller material: beige, rigid PVC.
Roller Diameter
Part No.
Description
SBR220 1.90"
SBR270 2.37"
Ball
Bore Type:
Blind
Roller Material:
PVC
Distance
Between
Frames
E-
Bearing Type:
20,000
40,000
60,000
80,000
100,000
120,000
Type F
PVC Roller with
Blind-Bore
Sleeve Bearing
3/4"
or
1-1/2"
Side
Frame
Side
Frame
5/16"
Hex bolt
13/16"
Rigid PVC
Roller
dia.
Stub shaft
dia.
7/8"
Roll pin part no.
CRP-0824SS
1/8" nominal
Conveyor Rollers
Type F roller is designed to provide added cleanliness and reduce potential areas of contamination. The one piece, blind bore sleeve bearing can accommodate a stainless steel
roller stub shaft or extended pin chain attachment up to 5/8". Unless specified otherwise,
rollers come with 1/2" bores that can be used with our 1/2", 316 stainless steel roller
stub shafts (see page 338) which are bolted directly to the side frame.
Bearing Type:
Sleeve
Bore Type:
Blind
Roller Material:
PVC
Stub Shaft
Diameter
1/2"
(other)
Roller Diameter
Part No.
Description
NR220
1.90"
NR270
2.38"
F-
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
330
Distance
Between
Frames
Rollers
Type G
PVC Roller with
Sleeve Bearings
Side
Frame
Side
Frame
Roller
dia.
13/16"
Rigid PVC
1/8"
Our economical, light duty roller with a selection of steel shaft assemblies. Designed to support the return
side of belt conveyors and inclined gravity systems. Standard shafts extend 13/16" at each end of a roller.
Custom extended shaft lengths are available. This roller can be purchased without a shaft if you prefer (leave
shaft information out of part number).
Bearing Type:
Bore Type:
Roller Material:
Sleeve
Through
PVC
Shaft Material
Description
Part No.
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
Roller Diameter
Part No.
Description
NR220 1.90"
NR270 2.38"
Distance
Between
Frames
G-7/16hexG-1/2
Distance between frames - 1/4"
(6" minimum)
Side
Frame
Side
Frame
13/16"
Type H
PVC Roller with One Piece
End Plugs of Sleeve
Bearing Material
Roller
dia.
Rigid PVC
Hex shaft adapter retracts
1/8"
Designed for belt driven conveyors offering all the advantages of a plastic roller and eliminates all the
problems associated with the use of ball bearings. Standard shafts extend 13/16" at each end of a roller.
This roller can be purchased without a shaft if you prefer (leave shaft information out of part number).
Bearing Type:
Bore Type:
Roller Material:
Shaft Material
Part No. Description
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
Sleeve
Through
PVC
H-7/16hexH-1/2
H-3/8
Distance
Between
Frames
110
331
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Rollers
Rollers
Type I
Steel Roller with
Plastic Ball Bearing
Side
Frame
Side
Frame
13/16"
1.90
Bearing Type:
Bore Type:
Roller Material:
Designed primarily for belt driven conveyors and inclined gravity systems where a heavy duty
roller is required. Standard shafts are 7/16" hex and extend 13/16" at each end of a roller.
Custom extended shaft lengths are available.
Ball
Through
Steel
Bearing
Part No.
Shaft Diameter
Description
Description
222LSB-224-01 Plastic housing with carbon steel caged bearing insert
7/16
222LSB-224-02 Plastic housing with carbon steel double shielded bearing insert
222LSB-224-03 Plastic housing with carbon steel double rubber sealed bearing insert
Tubing Material
Part No. Description
2
Carbon steel
3
304 stainless
Distance
Between
Frames
IType J
Steel / Aluminum Roller
with Non-Metallic
Sleeve Bearings
Side
Frame
13/16"
Roller
dia.
Conveyor Rollers
Side
Frame
1/8"
Roller can be produced from most standard tube sizes and using a conveyor roll end bearing from the table on
page 339. Designed primarily for belt driven conveyors and inclined gravity systems. It provides the same rigidity
as other metal tube rollers and yet eliminates all the problems associated with the use of ball bearings. Standard
shafts extend 13/16" at each end of a roller. Custom extended shaft lengths are available. This roller can be
purchased without a shaft if you prefer (leave shaft information out of part number).
Bearing Type:
Bore Type:
Roller Material:
Sleeve
Through
Steel
Shaft Material
Part No. Description
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
J-7/16hexJ-1/2
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
332
Tubing Material
Part No.
Description
2
Carbon steel
3
304 stainless
5
Aluminum
Distance
Between
Frames
Rollers
Type K
Side
Frame
Side
Frame
2.50
Rigid PVC
1.90
1/8" nominal
Designed primarily for gravity conveyors where a clean, corrosion free environment is required.
The bearings are unaffected by most normal washdown procedures. Standard shafts extend
13/16" at each end of a roller. Custom extended shaft lengths are available.
Bearing Type:
Bore Type:
Roller Material:
Ball
Through
PVC
Shaft Material
Part No. Description
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
Distance
Between
Frames
K-
Type L
Distance between frames - 1/4"
Side
Frame
13/16"
Side
Frame
1.75
2.50
Rigid PVC
Hex shaft adapter retracts
1/8"
Designed for belt driven systems or can be fitted with UHMW sprockets. Standard shafts extend
13/16" at each end of a roller. Custom extended shaft lengths are available.
Bearing Type:
Bore Type:
Roller Material:
Sleeve
Through
Shaft Material
Part No. Description
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
PVC
Bearing Material
Part No. Description
S
Nolu-S
Distance
Between
Frames
L-7/16hexL-1/2
333
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Rollers
Rollers
Type M
Side
Frame
Steel Reinforced
PVC Roller with
Plastic Ball Bearing
Side
Frame
13/16"
1.90"
1/8" nominal
Designed primarily for gravity conveyors where a clean, corrosion free environment is required. The
reinforcing tube will increase the load carrying capacity to the limit of the bearings. Standard shafts
extend 13/16" at each end of a roller. Custom extended shaft lengths are available.
Roller material: beige, rigid PVC over carbon steel.
Bearing Type:
Bore Type:
Roller Material:
Ball
Through
Shaft Material
Part No. Description
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
PVC
and steel
Distance
Between
Frames
M-
Type N
Steel Reinforced PVC Roller
with High Performance
Sleeve Bearings
Side
Frame
13/16"
Roller
dia.
Conveyor Rollers
Side
Frame
Designed primarily for belt driven conveyors and inclined gravity systems. Offers all the advantages of a
plastic roller and eliminates the problem associated with the use of ball bearings. Standard shafts extend
13/16" at each end of a roller. Custom extended shaft lengths are available.
Bearing Type:
Bore Type:
Roller Material:
Sleeve
Through
PVC
and steel
Shaft Material
Part No. Description
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
N-7/16hexN-1/2
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
334
Roller Diameter
Part No. Description
R220R 1.90"
R270R 2.38"
Bearing Material
Part No. Description
S
Nolu-S
Distance
Between
Frames
Rollers
Type P
Double Sprocket PVC Roller
with High Performance
Sleeve Bearings
Side
Frame
13/16"
Roller
dia.
Side
Frame
Rigid PVC
1/8"
.62
Hex shaft adapter retracts
Our Type A roller with a UHMW double sprocket is available for various roller chains. In a driven system, the need
for lubrication is eliminated. Better service life and chain wear is reduced. Noise levels are significantly reduced and
the roller gains easy acceptance by the USDA and FDA. Standard shafts extend 13/16" at each end of a roller.
Custom extended shaft lengths are available.
Bearing Type:
Bore Type:
Roller Material:
Sleeve
Through
PVC
Shaft Material
Part No. Description
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
7/16 hex
shaft
w/ round
shaft
Roller Diameter
Part No. Desc.
R220
1.90"
R250
2.25"
R270
2.38"
R280
2.50"
Bearing Material
Part No. Desc.
S
Nolu-S
Roller
Chain
Number
Number
of
Teeth
Distance
Between
Frames
P-7/16hexP-1/2
Type Q
Single Sprocket PVC Roller
with High Performance
Sleeve Bearings
Side
Frame
13/16"
Roller
dia.
Side
Frame
Rigid PVC
1/8"
Our Type A roller with a UHMW single sprocket is available for various roller chains. In a driven system, the need
for lubrication is eliminated. Better service life and chain wear is reduced. Noise levels are significantly reduced
and the roller gains easy acceptance by the USDA and FDA. Standard shafts extend 13/16" at each end of a roller.
Custom extended shaft lengths are available.
Bearing Type:
Bore Type:
Roller Material:
Sleeve
Through
PVC
Shaft Material
Part No. Description
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
7/16 hex
shaft
w/ round
shaft
Roller Diameter
Part No. Desc.
R220
1.90"
R250
2.25"
R270
2.38"
R280
2.50"
Bearing Material
Part No. Desc.
S
Nolu-S
Roller
Chain
Number
Number
of
Teeth
Distance
Between
Frames
Q-7/16hexQ-1/2
335
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Rollers
.62
Hex shaft adapter retracts
Rollers
Type S
Side
Frame
Side
Frame
2.37
13/16"
1.90
Rigid PVC
1/8" nominal
Plastic line shaft conveyor roller designed with a spring loaded 7/16" hex shaft. Noise levels are significantly
reduced and surface build up is minimized. Standard shafts extend 13/16" at each end of a roller. Custom extended
shaft lengths are available.
Bearing Type:
Bore Type:
Roller Material:
Ball
Through
Shaft Material
Part No. Description
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
PVC
Belt Diameter
Part No.
Description
3/16
3/16"
1/4
1/4"
Distance
Between
Frames
S-7/16hex-
Type T
Aluminum reinforced
UHMW Roller with
Precision Ball Bearing
Side
Frame
13/16"
.125" UHMW wall
2.0
Conveyor Rollers
.075" aluminum
Bearing Type:
Bore Type:
Roller Material:
Ball
Through
UHMW &
Aluminum
Side
Frame
1/8" nominal
Maximum abrasion resistant roller, reinforced with an aluminum tube. Fitted with a high performance bearing
assembly that provides the lowest coefficient of friction, excellent load carrying capacity and high speed capability
in one roller. Noise levels are significantly reduced and surface build up is minimized. The UHMW tube offers a great
non-stick roller surface for applications such as candy production or printing. Standard shafts extend 13/16" at each
end of a roller. Custom extended shaft lengths are available.
Roller material: UHMW, aluminum.
Bearing is HPR-220 series precision ball bearing mounted in reinforced polypropylene.
Shaft Material
Description
Part No.
CS
Carbon Steel
304SS
304 stainless
316SS
316 stainless
T-7/16hexCopyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
336
Distance
Between
Frames
Rollers
Type U
Urethane Covered
Steel Roller with
Plastic Ball Bearing
Side
Frame
Side
Frame
2.13
1/8" nominal
Bearing Type:
Bore Type:
Ball
Designed primarily for belt driven conveyors and inclined gravity systems where a heavy duty roller is required.
Urethane covering helps protect heavy products that require a flawless cosmetic appearance. Standard shafts
are 7/16" hex and extend 13/16" at each end of a roller. Custom extended shaft lengths are available.
Through
Stainless
or Carbon Steel
Roller Material:
Shaft Material
Part No. Description
CS
Carbon steel
304SS 304 stainless
316SS 316 stainless
Bearing
Part No.
Shaft Diameter
Description
Description
222LSB-224-01 Plastic housing with carbon steel insert
7/16
222LSB-224-02 Plastic housing with carbon steel double shielded bearing insert
222LSB-224-03 Plastic housing with carbon steel double rubber sealed bearing insert
Tubing Material
Distance
Part No. Description Between
2
Carbon steel Frames
3
304 stainless
UType V
Side
Frame
Side
Frame
Rigid PVC
1.90
1/8" nominal
Bearing Type:
Bore Type:
Roller Material:
Ball
Through
PVC
Free turning conveyor roller that is ideal for gravity systems and the precision bearing is also designed
for continuous use in driven systems, even at high speeds. Noise levels are significantly reduced and
surface build up is minimized. Standard shafts extend 13/16" at each end of a roller. Custom extended
shaft lengths are available.
Roller material: beige, rigid PVC.
Bearing is HPR-220 series precision ball bearing mounted in reinforced polypropylene.
Shaft Material
Description
Part No.
CS
Carbon Steel
304SS
304 stainless
316SS
316 stainless
Distance
Between
Frames
V-7/16hex337
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Rollers
PVC Free-Turning
Roller with Precision
Ball Bearing
HT
M=13/16"
N=7/8"
Q= 15/16"
T=1"
U= 1-1/16"
Conveyor Rollers
G
F
Part
Number
HT-072A
HT-073A
HT-082A
HT-090A
HT-102B
HT-103B
HT-104B
HT-112B
HT-113B
HT-114B
HT-120B
HT-122E
HT-123E
HT-127E
HT-124E
HT-130E
HT-137E
HT-134E
HT-140E
HT-142
HT-143
HT-144
HT-150
A
D Tube
Bore
OD
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
Gauge
Tube
Tube
Wall
B Tube
ID
1/2
20
.035
1/2
18
.049
5/8
20
.035
.706 1/2 EMT .042
3/4
20
.035
3/4
18
.049
3/4
16
.065
7/8
20
.035
7/8
18
.049
7/8
16
.065
.922 3/4 EMT .049
1
20
.035
1
18
.049
1
17
.058
1
16
.065
1.050 3/4 Pipe .113
1-1/8
17
.058
1-1/8
16
.065
1.163 1 EMT .057
1-1/4
20
.035
1-1/4
18
.049
1-1/4
16
.065
1.315 1 Pipe .133
.430
.402
.555
.622
.680
.652
.620
.805
.777
.745
.824
.930
.902
.884
.870
.824
1.009
.995
1.049
1.180
1.152
1.120
1.049
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/16
5/16
5/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
9/16
1/2
1/2
9/16
.75
CRP
.25
CRP-0812SS
(HP version)
Available for use in blind hole bearings. Our standard parts are
1/2 inch dia. and are available in two lengths, 3/4 inch and
1-1/2 inch. A 7/16 inch hex section is provided on the outside
portion so that an open end wrench may be used to tighten the
pin against the conveyor frame using a 5/16 inch UNC bolt.
.44
hex
.50
1.5
CRP-0824SS
(HL version)
.50
.44
hex
.50
.75
thread depth
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
338
HP
HL
for
1/2"
rod*
G
F
for
1/2"
rod*
HR-163
HR-164
HR-173
HR-174
HR-175
HR-180
HR-184
HR-190
HR-200
HR-204
HR-205
HR-208
HR-214
HR-216
HR-220
HR-224
HR-233
HR-234
HR-235
HR-236
HR-238
HR-240
HR-250
HR-253
HR-254
HR-255
HR-256
HR-258
HR-259
HR-264
HR-266
HR-268
HR-270
HR-280
Part
Number
HP-174
HP-175
HP-204
HP-205
HP-220
HP-234
HP-235
HP-254
HP-255
HP-270
HR-284
HR-285
HR-286
HR-288
HR-289
HR-304
HR-306
HR-308
HR-320
HP-284
HP-285
HR-334
HR-335
HR-336
HR-338
HP-334
HP-335
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-3/8
1-3/8
1-3/8
1-3/8
for
1/2"
rod*
1-1/4
Part
Number
G
F
1-3/4
Tube OD
D
Tube
Gauge
Tube
Wall
Tube ID
B
1-3/8
1-3/8
1-1/2
1-1/2
1-1/2
1.510
1-5/8
1.660
1.740
1-3/4
1-3/4
1-3/4
1-7/8
1-7/8
1.900
1.900
2
2
2
2
2
2.197
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-3/8
2-3/8
2-3/8
2.375
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-3/4
2-3/4
2-3/4
2.875
3
3
3
3
3
18
16
18
16
14
1-1/4 EMT
16
1-1/4 Pipe
1-1/2 EMT
16
14
11
16
13
1-1/2 Pipe
16
18
16
14
13
11
2 EMT
2-1/4 Nolu
18
16
14
13
11
10
16
13
11
2 Pipe
2-1/2 Nolu
18
16
14
13
11
10
16
13
11
2-1/2 Pipe
18
16
14
13
11
.049
.065
.049
.065
.083
.065
.065
.140
.065
.065
.083
.120
.065
.095
.145
.065
.049
.065
.083
.095
0.12
0.065
.154
.049
.065
.083
.095
.120
.134
.065
.095
.120
.154
.154
.049
.065
.083
.095
.120
.134
.065
.095
.120
.203
.049
.065
.083
.095
.120
1.277
1.245
1.402
1.370
1.334
1.380
1.495
1.380
1.610
1.620
1.584
1.510
1.745
1.685
1.610
1.770
1.902
1.870
1.834
1.810
1.760
2.067
1.942
2.152
2.120
2.084
2.060
2.010
1.982
2.245
2.185
2.135
2.067
2.192
2.402
2.370
2.334
2.310
2.260
2.232
2.620
2.560
2.510
2.469
2.902
2.870
2.834
2.810
2.760
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Part
Number
HL-174
HL-175
1-7/8
1-7/8
HL-204
1-7/8
HL-220
1-7/8
HL-233
HL-234
HL-235
1-3/4
1-3/4
1-3/4
HL-253
HL-254
HL-255
1-3/4
1-3/4
1-3/4
HL-264
1-3/4
HL-270
HL-283
HL-284
HL-285
1-3/4
1-3/4
1-3/4
HL-288
1-3/4
HL-304
1-3/4
HL-333
HL-334
HL-335
1-3/4
1-3/4
1-3/4
Conveyor Rollers
HR
Roller Components
ce the e
Repla
eus
and r
insert roller!
the
NT, NB
1/2"
.50
OD
5/8
.625
Nyla-Ride
Shaft sizes
available
1.50
(R-220 series is 1.375)
Blind Bore
Thru Bore
Conveyor Rollers
1/4"
pipe
.54
Part Number
Roller OD
A
Tube ID
B
Bore Dia.
NT4-R220
NT4.5-R220
NT5-R220
NT4-R221
NT4.5-R221
NT5-R221
NT4-R250
NT4.5-R250
NT5-R250
NT4-R270
NT4.5-R270
NT5-R270
NT4-R271
NT4.5-R271
NT5-R271
NT4-R280
NT4.5-R280
NT5-R280
NT4-R320
NT4.5-R320
NT5-R320
1.9
1.9
1.9
1.9
1.9
1.9
2-1/4
2-1/4
2-1/4
2-3/8
2-3/8
2-3/8
2-3/8
2-3/8
2-3/8
2-1/2
2-1/2
2-1/2
2-7/8
2-7/8
2-7/8
1.61
1.61
1.61
1.5
1.5
1.5
1.94
1.94
1.94
2.07
2.07
2.07
1.94
1.94
1.94
2.20
2.20
2.20
2.47
2.47
2.47
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
916
5/8
1/2
9/16
5/8
Tube Name
Part Number
NB4-R220
NB4.5-R220
NB5-R220
NB4-R221
NB4.5-R221
NB5-R221
NB4-R250
NB4.5-R250
NB5-R250
NB4-R270
NB4.5-R270
NB5-R270
NB4-R271
NB4.5-R271
NB5-R271
NB4-R280
NB4.5-R280
NB5-R280
NB4-R320
NB4.5-R320
NB5-R320
Roller OD
A
Tube ID
B
Bore Dia.
1.9
1.9
1.9
1.9
1.9
1.9
2-1/4
2-1/4
2-1/4
2-3/8
2-3/8
2-3/8
2-3/8
2-3/8
2-3/8
2-1/2
2-1/2
2-1/2
2-7/8
2-7/8
2-7/8
1.61
1.61
1.61
1.5
1.5
1.5
1.94
1.94
1.94
2.07
2.07
2.07
1.94
1.94
1.94
2.20
2.20
2.20
2.47
2.47
2.47
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
Tube Name
Nyla-Ride
Bearing Insert
Through bore. Used
with ABS end cap.
Nyla-Ride
Bearing Insert
.13
1.00 B
.89
1.49
.13
1.00 B
.89
1.63
Part Number
NT-4
NT-4.5
NT-5
Color
B (Bore Dia.)
Orange
Green
Blue
1/2
9/16
5/8
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Blind
Bore
Part Number
NB-4
NB-4.5
NB-5
340
Color
B (Bore Dia.)
Orange
Green
Blue
1/2
9/16
5/8
Roller Components
ST, SB
1/2"
.50
OD
5/8
.625
Nolu-S
Shaft sizes
available
ce the e
Repla
eus
and r
t
r
e
s
n
i
ller!
the ro
1.50
(R-220 series is 1.375)
Blind Bore
Roller OD
A
Tube ID
B
Bore Dia.
ST4-R220
ST4.5-R220
ST5-R220
ST4-R221
ST4.5-R221
ST5-R221
ST4-R250
ST4.5-R250
ST5-R250
ST4-R270
ST4.5-R270
ST5-R270
ST4-R271
ST4.5-R271
ST5-R271
ST4-R280
ST4.5-R280
ST5-R280
ST4-R320
ST4.5-R320
ST5-R320
1.9
1.9
1.9
1.9
1.9
1.9
2-1/4
2-1/4
2-1/4
2-3/8
2-3/8
2-3/8
2-3/8
2-3/8
2-3/8
2-1/2
2-1/2
2-1/2
2-7/8
2-7/8
2-7/8
1.61
1.61
1.61
1.5
1.5
1.5
1.94
1.94
1.94
2.07
2.07
2.07
1.94
1.94
1.94
2.20
2.20
2.20
2.47
2.47
2.47
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
916
5/8
1/2
9/16
5/8
Tube Name
Part Number
SB4-R220
SB4.5-R220
SB5-R220
SB4-R221
SB4.5-R221
SB5-R221
SB4-R250
SB4.5-R250
SB5-R250
SB4-R270
SB4.5-R270
SB5-R270
SB4-R271
SB4.5-R271
SB5-R271
SB4-R280
SB4.5-R280
SB5-R280
SB4-R320
SB4.5-R320
SB5-R320
Roller OD
A
Tube ID
B
Bore Dia.
1.9
1.9
1.9
1.9
1.9
1.9
2-1/4
2-1/4
2-1/4
2-3/8
2-3/8
2-3/8
2-3/8
2-3/8
2-3/8
2-1/2
2-1/2
2-1/2
2-7/8
2-7/8
2-7/8
1.61
1.61
1.61
1.5
1.5
1.5
1.94
1.94
1.94
2.07
2.07
2.07
1.94
1.94
1.94
2.20
2.20
2.20
2.47
2.47
2.47
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1/2
9/16
5/8
1.63
Nolu-S
Bearing Insert
Through bore. Used
with ABS end cap.
Nolu-S
Bearing Insert
.13
1.00 B
.89
Tube Name
1.49
.13
1.00 B
.89
1.63
Part Number
ST-4
ST-4.5
ST-5
Blind
Bore
B (Bore Dia.)
Part Number
SB-4
SB-4.5
SB-5
1/2
9/16
5/8
341
B (Bore Dia.)
1/2
9/16
5/8
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Rollers
Thru Bore
Part Number
1/4"
pipe
.54
Roller Components
Material: 303 stainless steel.
CR4
1/2
9/16
5/8
Length
1/2"
.50
VF-CR4-SS-0325-516
VF-CR4-SS-0325-38
VF-CR4-SS-0400-516
VF-CR4-SS-0400-38
VF-CR4-SS-0450-516
VF-CR4-SS-0450-38
VF-CR4-SS-0600-516
VF-CR4-SS-0600-38
VF-CR4-SS-0750-516
VF-CR4-SS-0750-38
1/4"
pipe
.54
Length
Tap
3.50
3.50
4.25
4.25
4.75
4.75
6.25
6.25
7.75
7.75
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
5/16-18
3/8-16
VF-CR4.5-SS-0325-38
VF-CR4.5-SS-0400-38
VF-CR4.5-SS-0450-38
VF-CR4.5-SS-0600-38
VF-CR4.5-SS-0750-38
5/8" Part Number
VF-CR5-SS-0325-38
VF-CR5-SS-0400-38
VF-CR5-SS-0450-38
VF-CR5-SS-0600-38
VF-CR5-SS-0750-38
Length
Tap
3.50
4.25
4.75
6.25
7.75
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
Length
Tap
3.50
4.25
4.75
6.25
7.75
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
5/8
.625
1.5
.50
.44
hex
CRP
.50
.75
thread depth
CRP-0824SS
HXA
Steel Hex Shaft Adapters
Used to slip over hex shafting so that the outside diameter
of the adapter becomes a journal surface on which the
bearing in the roller can rotate. Parts are available in both
carbon and 316 stainless steel.
C
Conveyor Rollers
.08
A
Part Number
Material
HXA-522SS
HXA-722
HXA-732
HXA-732SS
HXA-1132
HXA-1132SS
stainless steel
steel
steel
stainless steel
steel
stainless steel
Hex Shaft
A Dia.
B Dia.
C Length
5/16"
7/16"
7/16"
7/16"
11/16"
11/16"
3/4"
13/16"
13/16"
13/16"
1-1/8"
1-1/8"
0.565
0.628
0.628
0.628
0.94
0.94
1-3/8"
1-3/8"
2"
2"
2"
2"
FF-166
.69
.31
.09
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.44
.81 Press
fit
342
.665
across
flats
NBB
Part Number
Plastic
Ball Bearings
Designed for use with Nolu PVC
tubing. Standard bearings
use high performance Acetal
Races and 420 stainless alloy
balls. The same bearings are available with Polypropylene races and 316 stainless steel
balls for use in highly corrosive environments such as
battery manufacturing plants. However, custom made
bearings can be designed to meet your needs.
NBB-110
NBB-130
NBB-145
NBB-150
NBB-220
SPB-220
Material
B Dia.
D Dia.
A Shaft
Acetal
Acetal
Acetal
Acetal
Acetal
Polypropylene
.63
.83
1.03
1.06
1.62
1.62
.125
.10
.125
.125
.12
.12
.81
1.06
1.18
1.31
1.90
1.90
.06
.12
.118
.187
.185
.185
.625
.625
.729
.750
.935
.935
1/4 dia.
5/16 hex
5/16 dia.
5/16 hex
7/16 hex
7/16hex
D A
LSB
.38
Labyrinth Sealed
Ball Bearings
1.90 .44
1.77
1.12
Part Number
Description
222LSB-224-01
222LSB-224-02
222LSB-224-03
Shaft Size
Stub Shaft
Ball Bearings
Designed for use in light duty
gravity applications. The
stainless steel stub shafts
are spring loaded to ease the
assembly into a frame which
has been threaded to accept
the M8 roller shaft threads.
Acetal housing.
HPR
High Performance
Ball Bearings
Designed for use with Nolu
PVC tubing. These bearings are
fitted with a special polypropylene
housing assembly incorporating a
high performance, shielded 6000
series ball bearing. This bearing is ideal for continuous use in driven systems and the precision bearing
can also be used in gravity applications.
1.42
.16
SBR
7/16
7/16
7/16
.28
Part Number
.46
SBR220 1.62"
SBR270 2.09"
SBR-220
SBR-270
OD
1.90
2.37
M8
.96
Conveyor Rollers
.13
Part Number
1.62
1.90 .44
.18
343
HPR-220
Shaft Size
7/16
.94
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Roller Ends
VRE-640
(back view)
VRE
Roller Ends
Easily assembled onto any
lengths of pipe. Fast installation. Quiet, sanitary operation.
Glue fit assembly into 1-1/2
inch schedule 40 PVC pipe.
Thru shaft bore.
VRE-640
(front view)
1 PVC pipe
.92
.56
.26
Part Number
1.60
1.87
VRE-640-1540-12
VRE-640-1540-58
NRB
Acetal End Bearings
Inexpensive, injection molded
conveyor roll bearings designed
for light duty applications.
However, with a 7/16 hex shaft,
a low cost, higher performance
roller can be produced by
combining the Acetal bearing
with a Nolu-S Hex Adapter.
These Acetal bearings are
available with various bore sizes
and fit our most popular PVC
tubing sizes.
.19
Shaft
Tube Name
1/2
5/8
Part Number
C Dia.
A Dia.
B Dia.
Tube Name
NRB-220/5
NRB-220/8
NRB-220/8B*
NRB-220/9
NRB-220/10**
NRB-270/8
NRB-270/8B*
NRB-270/10**
5/16
1/2
1/2
9/16
5/8
1/2
1/2
5/8
1.62
1.62
1.62
1.62
1.62
2.09
2.09
2.09
1.90
1.90
1.90
1.90
1.90
2.37
2.37
2.37
*Blind bore
**Can be used in conjunction with
Nolu-S hex adapter, part number
HXA-721S, and a 7/16 hex shaft.
.13
Conveyor Rollers
.88
optional blind
bore depth
Nolu-S Rod
Nolu-S Rod
Nolu-S material and its outstanding
characteristics; low friction, higher
speed capability, self lubrication, is
available in bulk extruded rod form.
These rods are ideal for machining
various types of plastic components
including roller end bearings.
5/8"
2.5"
1"
1.25"
1.5"
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
3"
2"
344
Part Number
Diameter (in.)
Length (ft.)
012R10A-5
012R16A-5
012R20A-5
012R24A-5
012R32A-5
012R40A-5
012R48A-5
5/8
1
1-1/4
1-1/2
2
2-1/2
3
5
5
5
5
5
5
5
012R10A-10
012R16A-10
012R20A-10
012R24A-10
012R32A-10
012R40A-10
012R48A-10
5/8
1
1-1/4
1-1/2
2
2-1/2
3
10
10
10
10
10
10
10
Roller Selection
Roller Tubes
High Impact PVC Tube
Available in nine standard diameters ranging from 13/16 to 2-7/8 dia.
The recommended load capacity at room temperature is shown in chart
#1, the service temperature range being between -10F and +140F.
Steel Reinforcing Tube
Used to increase the stiffness of the above PVC tubing by a factor
of 10. This tube is made of carbon steel and therefore must be
encapsulated by using blind hole bearings if corrosion is anticipated.
The recommended capacity of our standard PVC rollers should never
be exceeded (max. 200lbs./roller).
Roller Components
ABS Plastic End Plug
Used to fill the ends of the larger PVC tube sizes so that a small
inexpensive flanged bearing can be used. Parts are available for five
standard PVC conveyor roller sizes from 1.90 to 2-7/8 dia.
Steel Hex Adapters
Used to slip over hex shafting so that the outside diameter of the
adapter becomes a journal surface on which the bearing in the roller
can rotate. Parts are available for 5/16 hex, 7/16 hex and 11/16 hex
assemblies in both carbon and 316 stainless steel.
Nolu-S Plastic Hex Adapters
Also used to slip over 7/16 hex shafting. They are primarily designed
for use with Nolu Acetal plastic bearings. In use, an oil film is generated
at the bearing surface which reduces friction and wear. The service
temperature range is normally between -10F and +140 F. Steel
hex adapters should be used where there is a high concentration
of abrasive particles.
Stainless Steel Roller Stub Shafts
Available for use in blind hole bearings. Our standard parts are
1/2 and are available in two lengths, 3/4 and 1-1/2. A 7/16
hex section is provided on the outside portion so that a C wrench
may be used to tighten the pin against the conveyor frame using
a 5/16 UNC bolt.
ABS Plastic Shaft Caps
Used on the ends of 7/16 hex or round shafts. They provide a simple
method of retaining the shaft in the roller assembly. Primarily they
are designed to offer a means of mounting the roller in the side
frames in a way that metal to metal contact can be avoided. With
an 11/16 wide, open ended slot in the side frame, noise and frame
wear can be eliminated.
UHMW Sprockets
Available to custom fit our standard rollers to a driven system. These
UHMW sprockets are problem solvers in dirty or corrosive environments.
They extend the life of the chain and are much quieter.
345
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Conveyor Rollers
Roller Capacity
Chart #1
Chart #2
200
*Use with evenly distributed
loads. For extremely concentrated
center loads, reduce these values
by one third ( x.667). In high speed
applications, do not exceed the load
limits set by the bearing load/speed chart
150
100
200
160
120
80
40
100
200
300
400
500
600
Roller rpm
50
0
0
12
24
36
48
60
72
Conveyor Rollers
Static Load
Capacity
45 lbs.
45 lbs.
45 lbs.
Table #1
Estimated average bearing life for Nolu plastic ball bearings in a clean environment. Bearing life
will be reduced by impact loads and by exposure to contamination. With longer rollers the load
capacity may be limited to the rigidity of the PVC tube, see chart #1 above.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
346
700
800
900
1000
348
Articulating Levelers
Loc-A-Lign Series Levelers
Solid Base Levelers
Socket Style Levelers
Adjustable Glides
Leg Tie
Bipod Bases
382
TYPICAL
ASSEMBLY
Post
Cap
Round
Tubing
Material: Reinforced polyamide with brass threaded insert.
Round
Tube End
Part
Number
VG-550-B38
VG-550-B12
VG-550-B58
VG-550-B34
VG-550-BM16
Leveler
(14764 equivalent)
VG-550-BM20
VG-558-B38
VG-558-B12
VG-558-B58
(34221 equivalent)
VG-558-B34
(34768 equivalent)
VG-554-B12
VG-554-B58
VG-554-B34
VG-554-BM16
(14755 equivalent)
Tube Size
Static
Load
1.50
1.50"
1.37"
1.71"
1-1/2"
Tube
1.38"
.065
1.90
3/4-10
3/8-16
1/2-13
5/8-11
VG-554-B38
1-1/2"
Sch. 5
Pipe
VG-551-B38
VG-551-B34
VG-551-BM16
VG-551-BM20
5/8-11
M20
VG-551-B58
M20
3/8-16
1/2-13
VG-558-BM20
VG-551-B12
M16
M16
(14751 equivalent)
3/8-16
1/2-13
5/8-11
3/4-10
VG-558-BM16
(14767 equivalent)
1.78"
1000 lbs.
.065
1.90
1.97"
1.95"
1.54"
1.69"
3/4-10
M16
M20
3/8-16
1-1/2"
Sch. 10
Pipe
1760 lbs.
.109
1/2-13
5/8-11
3/4-10
2.0
1.91"
2" Tube
M16
1760 lbs.
.065
VG-554-BM20
M20
34219
3/8-16
1.66
34763
1/2-13
1-1/4"
Sch. 5
Pipe
34764
5/8-11
1.65"
1.57"
1000 lbs.
1.65"
1.34"
1000 lbs.
.065
2.38
34014
2.37"
34211
5/8-11
2"
Sch. 6
Pipe
2.25"
5/8-11
1.97"
2.20"
1.50"
.080
2.38
2"
Sch. 10
Pipe
.109
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
348
1400 lbs.
1700 lbs.
Square
Tubing
VG-553-B12
VG-553-B58
VG-553-B34
1/2-13
5/8-11
3/4-10
VG-553-BM16
VG-553-BM20
VG-555-B38
M16
M20
VG-556-B12
VG-556-B58
VG-556-B34
1.50"
1.71"
1.38"
1.50
1000 lbs.
1-1/2"
Sq.
Tube
1.26"
.120
2.0
1.87"
2" Sq.
Tube
M16
1760 lbs.
.065
M20
3/8-16
1/2-13
1.97"
1.96"
1.55"
2.0
1.78"
5/8-11
VG-556-BM16
M16
VG-556-BM20
M20
34200
3/8-16
1000 lbs.
2" Sq.
Tube
3/4-10
(14797equivalent)
1760 lbs.
.109 or .120
1.0
1.00"
34201
Static
Load
.065
or .075
3/8-16
1/2-13
5/8-11
3/4-10
VG-555-BM16
1.37"
M16
M20
3/8-16
VG-555-BM20
VG-556-B38
Tube Size
5/8-11
3/4-10
(14607 equivalent)
1.50
VG-552-BM20
VG-553-B38
VG-555-B12
VG-555-B58
VG-555-B34
1-1/2"
Sq.
Tube
(14757 equivalent)
Leveler
3/8-16
1/2-13
VG-552-BM16
Square
Tube End
0.89"
1.18"
1" Sq.
Tube
1.00"
1/2-13
1100 lbs.
.065
1.18
34018
3/8-16
1.18"
1.08"
1.30"
1" Sq.
Tube
1.06"
1200 lbs.
.065
2.38
2.0
3.0
34040
5/8-11
2.37"
2.22"
2.17"
2"
Sch. 6
Sq. Pipe
1.77"
1.78
1300 lbs.
.080
VG-561-B58
5/8-11
VG-561-B34
3/4-10
VG-561-BM16
M16
VG-561-BM20
M20
2.0
2" X 3"
Tube
1760 lbs.
.125
560
Part Number
Tube Cap
This smooth plastic cap serves as a practical and
aesthetic plug/cover for the ends of square tubing.
3.0
349
1.95
1.54
SaniStar
UNC
L
H
DIA
Maximum Recommended
Static Load: 680 lbs.
Maximum Recommended
Static Load: 1800 lbs.
Base Material: 304 Stainless steel and rubber (70 shore).
Stem material: 304 Stainless steel.
Stem
UNC Thread
L2
177053U
1/2-13
.91
3.05
3.95
6.10
177056U
1/2-13
.91
5.45
6.30
3.95
177060U
5/8-11
.91
3.05
3.95
5.50
177061U
5/8-11
.91
4.65
5.50
177062U
5/8-11
.91
6.60
7.50
Stem
UNC Thread
L2
177003U
1/2-13
.83
3.05
3.75
177006U
1/2-13
.83
5.45
177010U
5/8-10
.83
3.05
177011U
5/8-10
.83
4.65
Part Number
Part Number
Maximum Recommended
Static Load: 4500 lbs.
Maximum Recommended
Static Load: 6800 lbs
L2
177104U
5/8-11
1.18
4.65
5.70
177105U
5/8-11
1.18
6.60
177108U
3/4-10
1.18
4.85
177109U
3/4-10
1.18
6.60
7.85
177110U
3/4-10
1.18
7.80
9.05
Part Number
L2
177158U
3/4-10
1.26
4.85
6.10
7.70
177159U
3/4-10
1.26
6.60
7.85
6.10
177160U
3/4-10
1.26
7.80
9.05
Part Number
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
350
+
_ 4
SaniStar
UNC
L2
L
0.24 H
0.59 DIA
DIA
Maximum Recommended
Static Load: 1800 lbs.
Maximum Recommended
Static Load: 4500 lbs.
Base Material: 304 Stainless steel and rubber (70 shore).
Stem material: 304 Stainless steel.
Stem
UNC Thread
L2
177254U
5/8-11
1.18
2.56
4.65
5.70
5.50
177255U
5/8-11
1.18
2.56
6.60
7.70
6.30
177258U
3/4-10
1.18
2.56
4.85
6.10
3.05
3.95
177259U
3/4-10
1.18
2.56
6.60
7.85
4.65
5.50
177260U
3/4-10
1.18
2.56
7.80
9.05
L2
177203U
1/2-13
.91
2.07
3.05
3.95
177205U
1/2-13
.91
2.07
4.65
177206U
1/2-13
.91
2.07
5.45
177210U
5/8-11
.91
2.07
177211U
5/8-11
.91
2.07
Part Number
Stem
UNC Thread
Part Number
351
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
SaniStar
Stainless Steel Leveler
with Thread Cover
L2
L1
Includes
Sanitary Thread
Cover for HACCP
needs!
L
2
1
DIA
Stem
UNC Thread
L1
L2
177300U
5/8-11
.91
2.17
6.30
4.35
7.30
177301U
5/8-11
.91
3.35
8.25
5.10
177302U
3/4-10
.91
2.17
6.30
4.35
177303U
3/4-10
.91
3.35
8.25
5.10
Part Number
Stem
UNC Thread
L1
L2
177310U
5/8-11
1.18
2.17
6.30
4.35
7.50
9.25
177311U
5/8-11
1.18
3.35
8.25
5.10
9.45
7.30
177312U
3/4-10
1.18
2.17
6.30
4.35
7.50
9.25
177313U
3/4-10
1.18
3.35
8.25
5.10
9.45
Part Number
L1
L2
177320U
5/8-11
1.26
2.17
6.30
4.35
7.70
177321U
5/8-11
1.26
3.35
8.25
5.10
9.65
177322U
3/4-10
1.26
2.17
6.30
4.35
7.70
177323U
3/4-10
1.26
3.35
8.25
5.10
9.65
Part Number
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
352
SaniStar
Stainless Steel Leveler
with Thread Cover
L2
L1
B
0.24 H
0.59 DIA
DIA
L1
L2
177350U
5/8-11
.91
2.17
2.1
6.30
4.35
7.30
177351U
5/8-11
.91
3.35
2.1
8.25
5.10
9.25
177352U
3/4-10
.91
2.17
2.1
6.30
4.35
7.30
177353U
3/4-10
.91
3.35
2.1
8.25
5.10
9.25
Part Number
Stem
UNC Thread
L1
L2
177360U
5/8-11
1.18
2.17
2.56
6.30
4.35
7.50
177361U
5/8-11
1.18
3.35
2.56
8.25
5.10
9.45
177362U
3/4-10
1.18
2.17
2.56
6.30
4.35
7.50
177363U
3/4-10
1.18
3.35
2.56
8.25
5.10
9.45
Part Number
353
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Leveling Pads
UNC
L2
Maximum Recommended
Static Load: 11000 lbs.
L1
DIA
Stem
UNC Thread
DIA
L1
L2
37692
5/8-11
3.15
.95
1.54
6.46
4.92
38309
3/4-10
3.15
.95
1.54
6.46
38310
3/4-10
3.15
.95
1.54
8.82
Part Number
Stem
UNC Thread
DIA
L1
L2
38321
3/4-10
3.94
.95
1.54
6.46
4.92
4.92
38322
3/4-10
3.94
.95
1.54
8.82
7.28
7.28
38324
1-8
3.94
.95
1.54
8.82
7.28
Part Number
DIA
L1
L2
38333
3/4-10
4.72
1.10
1.69
6.61
4.92
38334
3/4-10
4.72
1.10
1.69
8.97
7.28
38336
1-8
4.72
1.10
1.69
8.97
7.28
Part Number
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
354
Leveling Pads
UNC
L2
Maximum Recommended
Static Load: 11000 lbs.
dDIA
L1
H
I DIA
DIA
DIA
I DIA
D DIA
L1
L2
37710
5/8-11
3.15
2.13
.35
.87
1.46
6.38
4.92
37712
3/4-10
3.15
2.13
.35
.87
1.46
6.38
4.92
37713
3/4-10
3.15
2.13
.35
.87
1.46
8.74
7.28
Part Number
I DIA
D DIA
L1
L2
37737
3/4-10
3.94
2.89
.47
.95
1.54
6.46
4.92
37738
3/4-10
3.94
2.89
.47
.95
1.54
8.82
7.28
37740
1-8
3.94
2.89
.47
.95
1.54
8.82
7.28
Stem
UNC Thread
Part Number
355
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
fi
Base Materials
Leveler
Advantages:
Loc-A-Lign
Stem Materials
Corrosion resistant,
reinforced polyamide
offers superior strength
and can operate
continuously in temperatures up to 190 F. The VG-525 base
material is cast Nylathane. The design
allows the levelers to carry loads up to
7,200 pounds. Metal bases are either
300 series stainless steel or zinc plated
steel and have load capacities up to
22,000 pounds.
15 15
1515
15 15
15 15
15 15
15 15
1.0
Part Number
Static Load (lbs)
2:1 safety factor included
Available
Thread
Sizes
VG-580
100
300
100
1.58
2.0
5/16-18
3/8-16
1/2-13
(D=1.5)
2.31"
3.06"
3.98"
2.38
4.0
3.15
4.33
VG-533
VG-537
VG-501
VG-505
VG-511
VG-518
700
700
2000
2000
2600
4000
5/16-18
(D=1.0)
Overall Length
(L) 1/8"
Note: Not all thread
sizes are available in
all lengths
3/8-16
1/2-13
5/8-11
M10
M12
M16
3/8-16
1/2-13
5/8-11
M10
M12
M16
1/2-13
5/8-11
3/4-10
M12
M16
M20
3/8-16
1/2-13
5/8-11
M10
M12
M16
1/2-13
5/8-11
3/4-10
M12
M16
M20
1/2-13
5/8-11
3/4-10
M12
M16
M20
3.70"
3.90"
6.10"
4.54"
6.22"
7.71"
10.71"
3.74"
5.93"
4.52"
6.20"
7.69"
10.69"
4.68"
6.36"
7.85"
10.85"
2.13"
Articulation
N/A
15
15
15
Loc-A-Lign 5
15
15
Loc-A-Lign 5
15
Loc-A-Lign 5
Loc-A-Lign
Available
N/A
N/A
N/A
Yes
N/A
Yes
N/A
Vibration Pad
Standard on
VG-580
VG-534
VG-538
VG-504
VG-506
VG-512
VG-516
Lag Holes
Available
N/A
N/A
N/A
N/A
Double
Single, Double
N/A
Page Number
374
358
358
359
360
361-364
366
Solid Base
Available
N/A
N/A
N/A
VG-501D
page 369
VG-505D
page 370
N/A
N/A
Socket Style
N/A
N/A
N/A
N/A
N/A
VG-511B
page 371
N/A
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
356
Lag Holes
Selected bases are
available with single
or double lag holes.
Single lag holes are
especially convenient
when access to the
base for anchoring
purposes is limited.
ter
Grea on!
cti
Sele
Threaded
Tube Ends
Socket Style
Bases
Sockets available in
stainless or plated steel.
For those applications
where an existing stud
is present or a custom
spindle is required, we
can provide a socket
style base. Threaded
rod for all socket sizes
are available in carbon,
zinc plated or stainless
steel.
2 2
2 2
VG - 511 - 02 - S34 - L7
model #
spindle material/
diameter
base style
2 2
2 2
approx.
OAL
5 5
15 15
4.84
2.0
3.50
4.84
4.84
4.84
4.84
VG-513
VG-525
VG-517-K
VG-520
VG-520-K
VG-520-T
VG-590 Series
4400
7200
7000
7000
7000
7000
5000 - 22000
3/4-10
1-8
M20
M24
3/4-10
1-8
1 1/8-7
1 1/4-7
M20
M24
3/4-10
1-8
1 1/8-7
1 1/4-7
M20
M24
3/4-10
1-8
M20
M24
3/4-10
1-8
1 1/8-7
1 1/4-7
M20
M24
1-8
1 1/8-7
1 1/4-7
M24
1/2-13
5/8-11
3/4-10
1-8
M12
M16
M20
5.53"
7.03"
8.15"
8.52"
11.52"
7.25"
7.50"
5.97"
7.48"
10.07"
7.50"
7.45"
9.95"
11.95"
1.5" - 9.88"
15
15
N/A
N/A
N/A
N/A
N/A
Yes
N/A
VG-514
VG-514N
N/A
VG-514
VG-514N
VG-514
VG-514N
VG-514
VG-514N
VG-514
VG-514N
N/A
N/A
Single
N/A
Double
Double
Double
N/A
365
370
367
367
368
368
373-374
N/A
VG-525
Page 370
N/A
N/A
N/A
N/A
Standard
VG-513B
page 371
N/A
N/A
N/A
N/A
N/A
590B series
page 374
357
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
L
L
533
Articulating Leveler
Support for light duty machines.
Maximum Recommended
Static Load: 700 lbs.
Includes 2:1 safety factor.
15
VG-534
15
Vibration Pad
Neoprene rubber.
Fits any VG-533 series leveler.
Sold separately. See page 369.
Part Number
Stem
Thread
VG-533-01-P38-L3
3/8-16
VG-533-01-S38-L3
3/8-16
VG-533-01-P12-L3
1/2-13
VG-533-01-S12-L3
1/2-13
VG-533-01-P58-L3
5/8-11
VG-533-01-S58-L3
5/8-11
VG-533-01-PM10-L3
M10
VG-533-01-SM10-L3
M10
VG-533-01-PM12-L3
M12
VG-533-01-SM12-L3
M12
VG-533-01-PM16-L3
M16
VG-533-01-SM16-L3
M16
Stem Material
Zinc Stainless "L" Dim
3.70"
S
3.70"
3.70"
3.70"
3.70"
3.70"
3.70"
3.70"
3.70"
3.70"
3.70"
3.70"
.59
1.25
1.58
.07
with pad
537
Part Number
Stem
Thread
Articulating Leveler
VG-537-01-P38-L3
3/8-16
VG-537-01-S38-L3
3/8-16
VG-537-01-P12-L3
1/2-13
VG-537-01-S12-L3
1/2-13
VG-537-01-P12-L5
1/2-13
VG-537-01-S12-L5
1/2-13
VG-537-01-P58-L3
5/8-11
VG-537-01-S58-L3
5/8-11
VG-537-01-P58-L5
5/8-11
VG-537-01-S58-L5
5/8-11
Maximum Recommended
Static Load: 700 lbs.
Includes 2:1 safety factor.
15
15
VG-537-01-PM10-L3
M10
VG-537-01-SM10-L3
M10
VG-537-01-PM12-L3
M12
VG-537-01-SM12-L3
M12
VG-537-01-PM12-L5
M12
VG-538
VG-537-01-SM12-L5
M12
Vibration Pad
VG-537-01-PM16-L3
M16
Neoprene rubber.
Fits any VG-537 series leveler.
Sold separately. See page 369.
VG-537-01-SM16-L3
M16
VG-537-01-PM16-L5
M16
VG-537-01-SM16-L5
M16
.79
1.25
2.0
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.07
with pad
358
Stem Material
Zinc Stainless "L" Dim
3.90"
S
3.90"
3.90"
6.10"
3.90"
6.10"
3.90"
3.90"
6.10"
3.90"
6.10"
3.90"
6.10"
3.90"
6.10"
3.90"
3.90"
6.10"
3.90"
6.10"
501
Articulating Leveler
Conveyor and machinery support.
Units with M16 threads may be used
with VG-400 series bipods and tripods.
Maximum Recommended
Static Load: 2000 lbs.
Includes 2:1 safety factor.
15
15
Part Number
Stem
Thread
VG-501-01-P12-L3
1/2-13
VG-501-01-S12-L3
1/2-13
VG-501-01-P12-L5
1/2-13
VG-501-01-S12-L5
1/2-13
VG-501-01-P58-L3
5/8-11
VG-501-01-S58-L3
5/8-11
VG-501-01-P58-L5
5/8-11
VG-501-01-S58-L5
5/8-11
VG-501-01-P58-L8
5/8-11
VG-501-01-S58-L8
5/8-11
VG-501-01-P34-L5
3/4-10
VG-504
VG-501-01-S34-L5
3/4-10
Vibration Pad
VG-501-01-P34-L8
3/4-10
Neoprene rubber.
Fits any VG-501 series leveler.
Sold separately. See page 369.
VG-501-01-S34-L8
3/4-10
VG-501-01-P34-L10
3/4-10
VG-501-01-S34-L10
3/4-10
VG-501-01-PM12-L3
M12
VG-501-01-SM12-L3
M12
NOTE:
The VG-501 style levelers are available
with the underside cavity entirely and
permanently filled with urethane, adding
1/8" to the leveler
height. Please
specify by replacing base style -01
with a -U1 in the
part number:
VG-501-01-P12-L3
becomes
VG-501-U1-P12-L3
1.90
.90
2.38
.07
with pad
VG-501-01-NM16-L3*
M16
VG-501-01-PM16-L3
M16
VG-501-01-SM16-L3
M16
VG-501-01-PM16-L5
M16
VG-501-01-SM16-L5
M16
VG-501-01-PM16-L8
M16
VG-501-01-SM16-L8
M16
VG-501-01-PM20-L8
M20
VG-501-01-SM20-L8
M20
Stem Material
Zinc Stainless "L" Dim
4.54"
S
4.54"
6.22"
4.54"
6.22"
7.71"
6.22"
7.71"
10.71"
4.51"
6.22"
4.54"
6.22"
7.71"
6.22"
7.71"
10.71"
4.51"
4.51"
4.51"
S
4.51"
6.22"
7.71"
7.71"
6.22"
7.71"
7.71"
Typical
application:
VG-400 Series Base
or
VG-501-01-NM16-L3
VG-501-01-SM16-L3
501-T
Loc-A-Lign Series
Articulating Leveler
Conveyor and machinery support where
resistance to stem pull-out is required.
5
Maximum Recommended
Static Load: 2000 lbs.
Includes 2:1 safety factor.
Part Number
Stem
Thread
VG-501-01-P12-L5T
1/2-13
VG-501-01-S12-L5T
1/2-13
VG-501-01-P58-L5T
5/8-11
VG-501-01-S58-L5T
5/8-11
VG-501-01-P58-L8T
5/8-11
VG-501-01-S58-L8T
5/8-11
VG-501-01-P34-L5T
3/4-10
VG-501-01-S34-L5T
3/4-10
VG-501-01-P34-L8T
3/4-10
VG-501-01-S34-L8T
3/4-10
VG-501-01-P34-L10T
3/4-10
VG-501-01-S34-L10T
3/4-10
Stem Material
Zinc Stainless "L" Dim
6.22"
S
6.22"
6.22"
7.71"
6.22"
7.71"
10.71"
6.22"
7.71"
6.22"
7.71"
10.71"
1.90
VG-504
.90
Vibration Pad
Neoprene rubber.
Fits any VG-501 series leveler.
Sold separately. See page 369.
2.38
.07
with pad
359
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
505
Articulating Leveler
Conveyor and machinery support. Units with
M16 threads, with or without lag holes, may
be used with VG-400 series bipods and tripods.
Maximum Recommended
Static Load: 2000 lbs.
Includes 2:1 safety factor.
VG-505-01-
VG-505-02-
VG-506
Vibration Pad
Neoprene rubber.
Fits any VG-505 series leveler.
Sold separately. See page 369.
Part Number
Without Lag Holes
With Two Lag Holes
Stem
Thread
VG-505-01-P38-L3
VG-505-02-P38-L3
3/8-16
VG-505-01-S38-L3
VG-505-02-S38-L3
3/8-16
VG-505-01-P12-L3
VG-505-02-P12-L3
1/2-13
VG-505-01-S12-L3
VG-505-02-S12-L3
1/2-13
VG-505-01-P12-L5
VG-505-02-P12-L5
1/2-13
VG-505-01-S12-L5
VG-505-02-S12-L5
1/2-13
VG-505-01-P58-L3
VG-505-02-P58-L3
5/8-11
VG-505-01-S58-L3
VG-505-02-S58-L3
5/8-11
VG-505-01-P58-L5
VG-505-02-P58-L5
5/8-11
VG-505-01-S58-L5
VG-505-02-S58-L5
5/8-11
VG-505-01-PM10-L3
VG-505-02-PM10-L3
M10
VG-505-01-SM10-L3
VG-505-02-SM10-L3
M10
VG-505-01-PM12-L3
VG-505-02-PM12-L3
M12
VG-505-01-SM12-L3
VG-505-02-SM12-L3
M12
VG-505-01-PM12-L5
VG-505-02-PM12-L5
M12
VG-505-01-SM12-L5
VG-505-02-SM12-L5
M12
VG-505-01-PM16-L3
VG-505-02-PM16-L3
M16
VG-505-01-SM16-L3
VG-505-02-SM16-L3
M16
VG-505-01-PM16-L5
VG-505-02-PM16-L5
M16
VG-505-01-SM16-L5
VG-505-02-SM16-L5
M16
15
Stem Material
Zinc Stainless "L" Dim
3.74"
S
3.74"
3.74"
5.93"
3.74"
5.93"
3.74"
3.74"
5.93"
3.74"
5.93"
3.74"
5.93"
3.74"
5.93"
3.74"
3.74"
5.93"
3.74"
5.93"
15
The urethane filling completely seals the bottom of the leveler, eliminating entrapment areas that can harbor bacterial
growth. The material also has a vibration dampening effect
and is extremely skid resistant.
.35
1.27
.63
2.13 BC
3.15
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
360
.07
with pad
511
Articulating Leveler
Conveyor and machinery support. Units with
M16-L3 threads, with or without lag holes, may
be used with VG-400 series bipods and tripods.
Maximum Recommended
Static Load: 2600 lbs.
Includes 2:1 safety factor.
1.60
(1.74 on 3/4" and
M20 threads)
.48
.73
.10
with pad
2.92 BC
4.0
VG-512
Vibration Pad
Neoprene rubber.
Fits any VG-511 series leveler.
Sold separately. See page 369.
VG-511-01-
VG-511-02-
VG-511-03-
VG-511-04-
VG-511-01-P12-L3
VG-511-01-S12-L3
VG-511-01-P12-L5
VG-511-01-S12-L5
VG-511-01-P58-L3
VG-511-01-S58-L3
VG-511-01-P58-L5
VG-511-01-S58-L5
VG-511-01-P58-L7
VG-511-01-S58-L7
VG-511-01-P34-L5
VG-511-01-S34-L5
VG-511-01-P34-L7
VG-511-01-S34-L7
VG-511-01-P34-L10
VG-511-01-S34-L10
VG-511-01-PM12-L3
VG-511-01-SM12-L3
VG-511-01-PM12-L5
VG-511-01-SM12-L5
VG-511-01-PM16-L3
VG-511-01-SM16-L3
VG-511-01-PM16-L5
VG-511-01-SM16-L5
VG-511-01-PM16-L7
VG-511-01-SM16-L7
VG-511-01-PM20-L5
VG-511-01-SM20-L5
VG-511-01-PM20-L7
VG-511-01-SM20-L7
VG-511-01-PM20-L10
VG-511-01-SM20-L10
VG-511-02-P12-L3
VG-511-02-S12-L3
VG-511-02-P12-L5
VG-511-02-S12-L5
VG-511-02-P58-L3
VG-511-02-S58-L3
VG-511-02-P58-L5
VG-511-02-S58-L5
VG-511-02-P58-L7
VG-511-02-S58-L7
VG-511-02-P34-L5
VG-511-02-S34-L5
VG-511-02-P34-L7
VG-511-02-S34-L7
VG-511-02-P34-L10
VG-511-02-S34-L10
VG-511-02-PM12-L3
VG-511-02-SM12-L3
VG-511-02-PM12-L5
VG-511-02-SM12-L5
VG-511-02-PM16-L3
VG-511-02-SM16-L3
VG-511-02-PM16-L5
VG-511-02-SM16-L5
VG-511-02-PM16-L7
VG-511-02-SM16-L7
VG-511-02-PM20-L5
VG-511-02-SM20-L5
VG-511-02-PM20-L7
VG-511-02-SM20-L7
VG-511-02-PM20-L10
VG-511-02-SM20-L10
VG-511-03-P12-L3
VG-511-03-S12-L3
VG-511-03-P12-L5
VG-511-03-S12-L5
VG-511-03-P58-L3
VG-511-03-S58-L3
VG-511-03-P58-L5
VG-511-03-S58-L5
VG-511-03-P58-L7
VG-511-03-S58-L7
VG-511-03-P34-L5
VG-511-03-S34-L5
VG-511-03-P34-L7
VG-511-03-S34-L7
VG-511-03-P34-L10
VG-511-03-S34-L10
VG-511-03-PM12-L3
VG-511-03-SM12-L3
VG-511-03-PM12-L5
VG-511-03-SM12-L5
VG-511-03-PM16-L3
VG-511-03-SM16-L3
VG-511-03-PM16-L5
VG-511-03-SM16-L5
VG-511-03-PM16-L7
VG-511-03-SM16-L7
VG-511-03-PM20-L5
VG-511-03-SM20-L5
VG-511-03-PM20-L7
VG-511-03-SM20-L7
VG-511-03-PM20-L10
VG-511-03-SM20-L10
VG-511-04-P12-L3
VG-511-04-S12-L3
VG-511-04-P12-L5
VG-511-04-S12-L5
VG-511-04-P58-L3
VG-511-04-S58-L3
VG-511-04-P58-L5
VG-511-04-S58-L5
VG-511-04-P58-L7
VG-511-04-S58-L7
VG-511-04-P34-L5
VG-511-04-S34-L5
VG-511-04-P34-L7
VG-511-04-S34-L7
VG-511-04-P34-L10
VG-511-04-S34-L10
VG-511-04-PM12-L3
VG-511-04-SM12-L3
VG-511-04-PM12-L5
VG-511-04-SM12-L5
VG-511-04-PM16-L3
VG-511-04-SM16-L3
VG-511-04-PM16-L5
VG-511-04-SM16-L5
VG-511-04-PM16-L7
VG-511-04-SM16-L7
VG-511-04-PM20-L5
VG-511-04-SM20-L5
VG-511-04-PM20-L7
VG-511-04-SM20-L7
VG-511-04-PM20-L10
VG-511-04-SM20-L10
361
Stem
Thread
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
Stem Material
Zinc Stainless
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
"L" Dim
4.52"
4.52"
6.20"
6.20"
4.52"
4.52"
6.20"
6.20"
7.69"
7.69"
6.20"
6.20"
7.69"
7.69"
10.69"
10.69"
4.52"
4.52"
6.20"
6.20"
4.52"
4.52"
6.20"
6.20"
7.69"
7.69"
6.20"
6.20"
7.69"
7.69"
10.69"
10.69"
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
511H
Articulating Leveler
Conveyor and machinery support.
Maximum Recommended
Static Load: 2600 lbs.
Includes 2:1 safety factor.
VG-511H-01-
VG-511H-02-
VG-511H-03-
VG-511H-04-
VG-511H-01-P58-L5
VG-511H-01-S58-L5
VG-511H-01-P58-L7
VG-511H-01-S58-L7
VG-511H-01-P34-L5
VG-511H-01-S34-L5
VG-511H-01-P34-L7
VG-511H-01-S34-L7
VG-511H-01-P34-L10
VG-511H-01-S34-L10
VG-511H-01-P100-L7
VG-511H-01-S100-L7
VG-511H-01-P100-L10
VG-511H-01-S100-L10
VG-511H-01-PM20-L5
VG-511H-01-SM20-L5
VG-511H-01-PM20-L7
VG-511H-01-SM20-L7
VG-511H-01-PM20-L10
VG-511H-01-SM20-L10
VG-511H-01-PM24-L7
VG-511H-01-SM24-L7
VG-511H-01-PM24-L10
VG-511H-01-SM24-L10
VG-511H-02-P58-L5
VG-511H-02-S58-L5
VG-511H-02-P58-L7
VG-511H-02-S58-L7
VG-511H-02-P34-L5
VG-511H-02-S34-L5
VG-511H-02-P34-L7
VG-511H-02-S34-L7
VG-511H-02-P34-L10
VG-511H-02-S34-L10
VG-511H-02-P100-L7
VG-511H-02-S100-L7
VG-511H-02-P100-L10
VG-511H-02-S100-L10
VG-511H-02-PM20-L5
VG-511H-02-SM20-L5
VG-511H-02-PM20-L7
VG-511H-02-SM20-L7
VG-511H-02-PM20-L10
VG-511H-02-SM20-L10
VG-511H-02-PM24-L7
VG-511H-02-SM24-L7
VG-511H-02-PM24-L10
VG-511H-02-SM24-L10
VG-511H-03-P58-L5
VG-511H-03-S58-L5
VG-511H-03-P58-L7
VG-511H-03-S58-L7
VG-511H-03-P34-L5
VG-511H-03-S34-L5
VG-511H-03-P34-L7
VG-511H-03-S34-L7
VG-511H-03-P34-L10
VG-511H-03-S34-L10
VG-511H-03-P100-L7
VG-511H-03-S100-L7
VG-511H-03-P100-L10
VG-511H-03-S100-L10
VG-511H-03-PM20-L5
VG-511H-03-SM20-L5
VG-511H-03-PM20-L7
VG-511H-03-SM20-L7
VG-511H-03-PM20-L10
VG-511H-03-SM20-L10
VG-511H-03-PM24-L7
VG-511H-03-SM24-L7
VG-511H-03-PM24-L10
VG-511H-03-SM24-L10
Stem
Thread
VG-511H-04-P58-L5
VG-511H-04-S58-L5
VG-511H-04-P58-L7
VG-511H-04-S58-L7
VG-511H-04-P34-L5
VG-511H-04-S34-L5
VG-511H-04-P34-L7
VG-511H-04-S34-L7
VG-511H-04-P34-L10
VG-511H-04-S34-L10
VG-511H-04-P100-L7
VG-511H-04-S100-L7
VG-511H-04-P100-L10
VG-511H-04-S100-L10
VG-511H-04-PM20-L5
VG-511H-04-SM20-L5
VG-511H-04-PM20-L7
VG-511H-04-SM20-L7
VG-511H-04-PM20-L10
VG-511H-04-SM20-L10
VG-511H-04-PM24-L7
VG-511H-04-SM24-L7
VG-511H-04-PM24-L10
VG-511H-04-SM24-L10
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
M20
M20
M20
M20
M20
M20
M24
M24
M24
M24
Stem Material
Zinc Stainless "L" Dim
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
5.73"
6.15"
7.31"
7.69"
6.15"
6.15"
7.69"
7.69"
9.95"
9.95"
7.69"
7.69"
9.95"
9.95"
6.15"
6.15"
7.69"
7.69"
9.95"
9.95"
7.69"
7.69"
9.95"
9.95"
15 15
VG-512
Vibration Pad
Neoprene rubber.
Fits any VG-511 series leveler.
Sold separately. See page 369.
NOTE: The VG-511-01 or VG-511H-01 style levelers (without lag holes)
are available with the underside cavity entirely and permanently filled with
urethane, adding 1/8" to the leveler height. Please specify by replacing
base style -01 with a -U1 in the part number:
L
1.60
(1.78 on 1" and
M24 threads)
.48
.73
.10
with pad
The urethane filling completely seals the bottom of the leveler, eliminating
entrapment areas that can harbor bacterial growth. The material also has a
vibration dampening effect and is extremely skid resistant.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
362
2.92 BC
4.0
511-T
Loc-A-Lign Series
Articulating Leveler
Conveyor and machinery support where
resistance to stem pull-out is required.
Maximum Recommended
Static Load: 2600 lbs.
Includes 2:1 safety factor.
VG-511-01-
VG-511-02-
VG-511-03-
VG-511-04-
VG-511-01-P12-L5T
VG-511-01-S12-L5T
VG-511-01-P58-L5T
VG-511-01-S58-L5T
VG-511-01-P58-L7T
VG-511-01-S58-L7T
VG-511-01-P34-L5T
VG-511-01-S34-L5T
VG-511-01-P34-L7T
VG-511-01-S34-L7T
VG-511-01-P34-L10T
VG-511-01-S34-L10T
VG-511-01-PM16-L5T
VG-511-01-SM16-L5T
VG-511-01-PM16-L7T
VG-511-01-SM16-L7T
VG-511-01-PM20-L5T
VG-511-01-SM20-L5T
VG-511-01-PM20-L7T
VG-511-01-SM20-L7T
VG-511-01-PM20-L10T
VG-511-01-SM20-L10T
VG-511-02-P12-L5T
VG-511-02-S12-L5T
VG-511-02-P58-L5T
VG-511-02-S58-L5T
VG-511-02-P58-L7T
VG-511-02-S58-L7T
VG-511-02-P34-L5T
VG-511-02-S34-L5T
VG-511-02-P34-L7T
VG-511-02-S34-L7T
VG-511-02-P34-L10T
VG-511-02-S34-L10T
VG-511-02-PM16-L5T
VG-511-02-SM16-L5T
VG-511-02-PM16-L7T
VG-511-02-SM16-L7T
VG-511-02-PM20-L5T
VG-511-02-SM20-L5T
VG-511-02-PM20-L7T
VG-511-02-SM20-L7T
VG-511-02-PM20-L10T
VG-511-02-SM20-L10T
VG-511-03-P12-L5T
VG-511-03-S12-L5T
VG-511-03-P58-L5T
VG-511-03-S58-L5T
VG-511-03-P58-L7T
VG-511-03-S58-L7T
VG-511-03-P34-L5T
VG-511-03-S34-L5T
VG-511-03-P34-L7T
VG-511-03-S34-L7T
VG-511-03-P34-L10T
VG-511-03-S34-L10T
VG-511-03-PM16-L5T
VG-511-03-SM16-L5T
VG-511-03-PM16-L7T
VG-511-03-SM16-L7T
VG-511-03-PM20-L5T
VG-511-03-SM20-L5T
VG-511-03-PM20-L7T
VG-511-03-SM20-L7T
VG-511-03-PM20-L10T
VG-511-03-SM20-L10T
VG-511-04-P12-L5T
VG-511-04-S12-L5T
VG-511-04-P58-L5T
VG-511-04-S58-L5T
VG-511-04-P58-L7T
VG-511-04-S58-L7T
VG-511-04-P34-L5T
VG-511-04-S34-L5T
VG-511-04-P34-L7T
VG-511-04-S34-L7T
VG-511-04-P34-L10T
VG-511-04-S34-L10T
VG-511-04-PM16-L5T
VG-511-04-SM16-L5T
VG-511-04-PM16-L7T
VG-511-04-SM16-L7T
VG-511-04-PM20-L5T
VG-511-04-SM20-L5T
VG-511-04-PM20-L7T
VG-511-04-SM20-L7T
VG-511-04-PM20-L10T
VG-511-04-SM20-L10T
Stem
Thread
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
Stem Material
Zinc Stainless "L" Dim
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
6.20"
6.20"
6.20"
6.20"
7.69"
7.69"
6.20"
6.20"
7.69"
7.69"
10.69"
10.69"
6.20"
6.20"
7.69"
7.69"
6.20"
6.20"
7.69"
7.69"
10.69"
10.69"
5 5
VG-512
Neoprene rubber.
Fits any VG-511 series leveler.
Sold separately. See page 369.
L
1.60
(1.74 on 3/4" and
M20 threads)
.48
.73
2.92 BC
4.0
.10
with pad
363
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Vibration Pad
511H-T
Articulating Leveler
Conveyor and machinery support.
Maximum Recommended
Static Load: 2600 lbs.
Includes 2:1 safety factor.
VG-511H-01-
VG-511H-02-
VG-511H-03-
VG-511H-04-
VG-511H-01-P58-L5T
VG-511H-01-S58-L5T
VG-511H-01-P58-L7T
VG-511H-01-S58-L7T
VG-511H-01-P34-L5T
VG-511H-01-S34-L5T
VG-511H-01-P34-L7T
VG-511H-01-S34-L7T
VG-511H-01-P34-L10T
VG-511H-01-S34-L10T
VG-511H-01-P100-L7T
VG-511H-01-S100-L7T
VG-511H-01-P100-L10T
VG-511H-01-S100-L10T
VG-511H-01-PM20-L5T
VG-511H-01-SM20-L5T
VG-511H-01-PM20-L7T
VG-511H-01-SM20-L7T
VG-511H-01-PM20-L10T
VG-511H-01-SM20-L10T
VG-511H-01-PM24-L7T
VG-511H-01-SM24-L7T
VG-511H-01-PM24-L10T
VG-511H-01-SM24-L10T
VG-511H-02-P58-L5T
VG-511H-02-S58-L5T
VG-511H-02-P58-L7T
VG-511H-02-S58-L7T
VG-511H-02-P34-L5T
VG-511H-02-S34-L5T
VG-511H-02-P34-L7T
VG-511H-02-S34-L7T
VG-511H-02-P34-L10T
VG-511H-02-S34-L10T
VG-511H-02-P100-L7T
VG-511H-02-S100-L7T
VG-511H-02-P100-L10T
VG-511H-02-S100-L10T
VG-511H-02-PM20-L5T
VG-511H-02-SM20-L5T
VG-511H-02-PM20-L7T
VG-511H-02-SM20-L7T
VG-511H-02-PM20-L10T
VG-511H-02-SM20-L10T
VG-511H-02-PM24-L7T
VG-511H-02-SM24-L7T
VG-511H-02-PM24-L10T
VG-511H-02-SM24-L10T
VG-511H-03-P58-L5T
VG-511H-03-S58-L5T
VG-511H-03-P58-L7T
VG-511H-03-S58-L7T
VG-511H-03-P34-L5T
VG-511H-03-S34-L5T
VG-511H-03-P34-L7T
VG-511H-03-S34-L7T
VG-511H-03-P34-L10T
VG-511H-03-S34-L10T
VG-511H-03-P100-L7T
VG-511H-03-S100-L7T
VG-511H-03-P100-L10T
VG-511H-03-S100-L10T
VG-511H-03-PM20-L5T
VG-511H-03-SM20-L5T
VG-511H-03-PM20-L7T
VG-511H-03-SM20-L7T
VG-511H-03-PM20-L10T
VG-511H-03-SM20-L10T
VG-511H-03-PM24-L7T
VG-511H-03-SM24-L7T
VG-511H-03-PM24-L10T
VG-511H-03-SM24-L10T
Stem
Thread
VG-511H-04-P58-L5T
VG-511H-04-S58-L5T
VG-511H-04-P58-L7T
VG-511H-04-S58-L7T
VG-511H-04-P34-L5T
VG-511H-04-S34-L5T
VG-511H-04-P34-L7T
VG-511H-04-S34-L7T
VG-511H-04-P34-L10T
VG-511H-04-S34-L10T
VG-511H-04-P100-L7T
VG-511H-04-S100-L7T
VG-511H-04-P100-L10T
VG-511H-04-S100-L10T
VG-511H-04-PM20-L5T
VG-511H-04-SM20-L5T
VG-511H-04-PM20-L7T
VG-511H-04-SM20-L7T
VG-511H-04-PM20-L10T
VG-511H-04-SM20-L10T
VG-511H-04-PM24-L7T
VG-511H-04-SM24-L7T
VG-511H-04-PM24-L10T
VG-511H-04-SM24-L10T
5/8-11
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
1-8
1-8
1-8
1-8
M20
M20
M20
M20
M20
M20
M24
M24
M24
M24
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
5 5
VG-512
Vibration Pad
Neoprene rubber.
Fits any VG-511 series leveler.
Sold separately. See page 369.
L
1.60
(1.78 on 1" and
M24 threads)
.48
.73
.10
with pad
2.92 BC
4.0
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
364
5.73"
6.15"
7.31"
7.69"
6.15"
6.15"
7.69"
7.69"
9.95"
9.95"
7.69"
7.69"
9.95"
9.95"
6.15"
6.15"
7.69"
7.69"
9.95"
9.95"
7.69"
7.69"
9.95"
9.95"
513
Articulating Leveler
Machinery Support
Maximum Recommended
Static Load: 4400 lbs.
Includes 2:1 safety factor.
Part Number
Stem
Thread
VG-513-01-P34-L5
3/4-10
VG-513-01-S34-L5
3/4-10
VG-513-01-P34-L8
3/4-10
VG-513-01-S34-L8
3/4-10
VG-513-01-PM20-L5
M20
VG-513-01-SM20-L5
M20
VG-513-01-PM20-L8
M20
VG-513-01-SM20-L8
M20
Stem Material
Zinc Stainless
"L" Dim
7.03"
S
7.03"
8.55"
S
8.55"
7.03"
S
7.03"
8.55"
S
8.55"
15 15
VG-514
Vibration Pad
Neoprene rubber with
steel plate for even weight
distribution. Sold separately.
See page 369. Max. load:
7000 lbs.
VG-514N
2.40
Vibration Pad
1.77
4.84
VG-513H-01-P34-L5
3/4-10
VG-513H-01-S34-L5
3/4-10
Articulating Leveler
VG-513H-01-P34-L7
3/4-10
Machinery Support
VG-513H-01-S34-L7
3/4-10
VG-513H-01-P34-L10
3/4-10
VG-513H-01-S34-L10
3/4-10
VG-513H-01-P100-L7
1-8
VG-513H-01-S100-L7
1-8
VG-513H-01-P100-L10
1-8
513H
Maximum Recommended
Static Load: 4400 lbs.
Includes 2:1 safety factor.
15 15
VG-513H-01-S100-L10
1-8
VG-513H-01-PM20-L6
M20
VG-513H-01-SM20-L6
M20
VG-513H-01-PM20-L8
M20
VG-513H-01-SM20-L8
M20
VG-513H-01-PM20-L10 M20
Stem Material
Zinc Stainless
VG-513H-01-PM24-L8
M24
VG-513H-01-SM24-L8
M24
VG-513H-01-PM24-L10 M24
VG-513H-01-SM24-L10 M24
2.44
7.03"
S
7.03"
8.55"
S
P
8.55"
10.83"
S
P
10.83"
8.55"
S
P
8.55"
10.83"
S
P
10.83"
7.03"
S
P
7.03"
8.55"
S
P
VG-513H-01-SM20-L10 M20
"L" Dim
8.55"
10.83"
S
P
10.83"
8.55"
S
P
8.55"
10.83"
10.83"
1.77
4.84
.35
with pad
365
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Part Number
518
Support Leveler
Part Number
Machinery Support
Maximum Recommended
Static Load: 4000 lbs.
Includes 2:1 safety factor.
15 15
L
1.82
(1.72 on 1/2" and
12 mm threads)
.12
with pad
.43
.59
VG-516
3.27 BC
4.33
Vibration Pad
Flexible PVC. Fits any VG-518
series leveler. Sold separately. See
page 369.
518H
Support Leveler
Machinery Support
Maximum Recommended
Static Load: 4000 lbs.
Includes 2:1 safety factor.
15 15
L
.43
1.85
.59
VG-518-01-P12-L3
1/2-13
VG-518-01-S12-L3
1/2-13
VG-518-01-P12-L5
1/2-13
VG-518-01-S12-L5
1/2-13
VG-518-01-P58-L3
5/8-11
VG-518-01-S58-L3
5/8-11
VG-518-01-P58-L5
5/8-11
VG-518-01-S58-L5
5/8-11
VG-518-01-P58-L7
5/8-11
VG-518-01-S58-L7
5/8-11
VG-518-01-P34-L5
3/4-10
VG-518-01-S34-L5
3/4-10
VG-518-01-P34-L7
3/4-10
VG-518-01-S34-L7
3/4-10
VG-518-01-P34-L10
3/4-10
VG-518-01-S34-L10
3/4-10
VG-518-01-PM12-L3
M12
VG-518-01-SM12-L3
M12
VG-518-01-PM12-L5
M12
VG-518-01-SM12-L5
M12
VG-518-01-PM16-L3
M16
VG-518-01-SM16-L3
M16
VG-518-01-PM16-L5
M16
VG-518-01-SM16-L5
M16
VG-518-01-PM16-L7
M16
VG-518-01-SM16-L7
M16
VG-518-01-PM20-L5
M20
VG-518-01-SM20-L5
M20
VG-518-01-PM20-L7
M20
VG-518-01-SM20-L7
M20
Part Number
Stem
Thread
VG-518H-01-P34-L5
3/4-10
VG-518H-01-S34-L5
3/4-10
VG-518H-01-P34-L7
3/4-10
VG-518H-01-S34-L7
3/4-10
VG-518H-01-P34-L10
3/4-10
VG-518H-01-S34-L10
3/4-10
VG-518H-01-P100-L7
1-8
VG-518H-01-S100-L7
1-8
VG-518H-01-P100-L10
1-8
VG-518H-01-S100-L10
1-8
VG-518H-01-PM20-L6
M20
VG-518H-01-SM20-L6
M20
VG-518H-01-PM20-L8
M20
VG-518H-01-SM20-L8
M20
.12
with pad VG-518H-01-PM20-L10 M20
VG-518H-01-SM20-L10 M20
VG-516
Vibration Pad
Stem
Thread
3.27 BC
4.33
VG-518H-01-PM24-L8
M24
VG-518H-01-SM24-L8
M24
VG-518H-01-PM24-L10 M24
VG-518H-01-SM24-L10 M24
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
366
Stem Material
Zinc Stainless
"L" Dim
4.68"
S
4.68"
6.36"
S
P
6.36"
4.68"
S
P
4.68"
6.36"
S
P
6.36"
7.85"
S
P
7.85"
6.36"
S
P
6.36"
7.85"
S
P
7.85"
10.85"
S
P
10.85"
4.68"
S
P
4.68"
6.36"
S
P
6.36"
4.68"
S
P
4.68"
6.36"
S
P
6.36"
7.85"
S
P
7.85"
6.36"
S
P
6.36"
7.85"
S
Stem Material
Zinc Stainless
7.85"
"L" Dim
6.29"
S
6.29"
7.83"
S
P
7.83"
10.09"
S
P
10.09"
7.83"
S
P
7.83"
10.09"
S
P
10.09"
6.29"
S
P
6.29"
7.83"
S
P
7.83"
10.09"
S
P
10.09"
7.83"
S
P
7.83"
10.09"
10.09"
517-K
Support Leveler
Machinery Support
Maximum Recommended
Static Load: 7000 lbs.
Includes 2:1 safety factor.
Part Number
Stem
Thread
VG-517-01-P34-L7K
VG-517-01-S34-L7K
VG-517-01-P100-L7K
VG-517-01-S100-L7K
VG-517-01-P113-L7K
VG-517-01-S113-L7K
VG-517-01-P125-L7K
VG-517-01-S125-L7K
VG-517-01-PM20-L7K
VG-517-01-SM20-L7K
VG-517-01-PM24-L7K
VG-517-01-SM24-L7K
3/4-10
3/4-10
1-8
1-8
1 1/8-7
1 1/8-7
1 1/4-7
1 1/4-7
M20
M20
M24
M24
Stem Material
Zinc Stainless
P
S
P
S
P
S
P
S
P
S
P
S
"L" Dim
7.50"
7.50"
7.48"
7.48"
7.48"
7.48"
7.48"
7.48"
7.48"
7.48"
7.48"
7.48"
VG-514
Vibration Pad
VG-514N
2.15
Vibration Pad
1.35
4.84
Support Leveler
Machinery Support with
adjusting nut welded to stem.
Maximum Recommended
Static Load: 7000 lbs.
Includes 2:1 safety factor.
2 2
VG-520-02-P34-L5
3/4-10
VG-520-02-S34-L5
3/4-10
VG-520-02-P34-L7
3/4-10
VG-520-02-S34-L7
3/4-10
VG-520-02-P34-L10
3/4-10
VG-520-02-S34-L10
3/4-10
VG-520-02-P100-L7
1-8
VG-520-02-S100-L7
1-8
VG-520-02-P100-L10
1-8
VG-520-02-S100-L10
1-8
VG-520-02-PM20-L5
M20
VG-520-02-SM20-L5
M20
VG-520-02-PM20-L7
M20
VG-520-02-SM20-L7
M20
VG-520-02-PM20-L10
M20
M20
VG-520-02-PM24-L7
M24
VG-520-02-SM24-L7
M24
VG-520-02-PM24-L10
M24
VG-520-02-SM24-L10
.35
with pad
M24
.67
4.84
Stem
Thread
VG-520-02-SM20-L10
.52
3.88 BC
Part Number
Stem Material
Zinc Stainless
"L" Dim
5.97"
S
5.97"
7.48"
S
P
7.48"
10.07"
S
P
10.07"
7.48"
S
P
7.48"
10.07"
S
P
10.07"
5.97"
S
P
5.97"
7.48"
S
P
7.48"
10.07"
S
P
10.07"
7.48"
S
P
7.48"
10.07"
10.07"
VG-514
VG-514N
Vibration Pad
Vibration Pad
367
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
520
2.61
520-K
Support Leveler
Part Number
Stem
Thread
Machinery Support
VG-520-02-P34-L7K
3/4-10
VG-520-02-S34-L7K
3/4-10
VG-520-02-P100-L7K
1-8
Maximum Recommended
Static Load: 7000 lbs.
Includes 2:1 safety factor.
2 2
VG-520-02-S100-L7K
1-8
VG-520-02-P113-L7K
1 1/8-7
VG-520-02-S113-L7K
1 1/8-7
VG-520-02-P125-L7K
1 1/4-7
VG-520-02-S125-L7K
1 1/4-7
VG-520-02-PM20-L7K
M20
VG-520-02-SM20-L7K
M20
VG-520-02-PM24-L7K
M24
VG-520-02-SM24-L7K
M24
Stem Material
Zinc Stainless
"L" Dim
7.50"
S
7.50"
7.50"
S
P
7.50"
7.50"
S
P
7.50"
7.50"
S
P
7.50"
7.50"
S
P
7.50"
7.50"
7.50"
VG-514
Vibration Pad
2.57
.52
.67
VG-514N
3.88 BC
Vibration Pad
.35
with pad
4.84
520-T
Part Number
Stem
Thread
Loc-A-Lign Series
Articulating Leveler
VG-520-02-P100-L7T
1-8
VG-520-02-S100-L7T
1-8
VG-520-02-P100-L10T
1-8
VG-520-02-S100-L10T
1-8
VG-520-02-P100-L12T
1-8
Maximum Recommended
Static Load: 7000 lbs.
Includes 2:1 safety factor.
VG-520-02-S100-L12T
1-8
VG-520-02-P113-L7T
1 1/8-7
VG-520-02-S113-L7T
1 1/8-7
VG-520-02-P113-L10T 1 1/8-7
Stem Material
Zinc Stainless
VG-520-02-P113-L12T 1 1/8-7
5 5
1 1/4-7
VG-520-02-S125-L7T
1 1/4-7
VG-520-02-P125-L10T 1 1/4-7
VG-520-02-P125-L12T 1 1/4-7
Vibration Pad
2.85
.52
.67
VG-514N
Vibration Pad
3.88 BC
M24
VG-520-02-SM24-L7T
M24
VG-520-02-PM24-L10T
M24
VG-520-02-SM24-L10T
M24
VG-520-02-PM24-L12T
M24
VG-520-02-SM24-L12T
M24
.35
with pad
4.84
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
VG-520-02-PM24-L7T
368
11.95"
7.45"
S
P
7.45"
9.95"
S
P
9.95"
11.95"
S
P
11.95"
7.45"
S
P
7.45"
9.95"
S
P
VG-520-02-S125-L12T 1 1/4-7
VG-514
9.95"
11.95"
VG-520-02-S125-L10T 1 1/4-7
7.45"
9.95"
VG-520-02-S113-L12T 1 1/8-7
VG-520-02-P125-L7T
7.45"
S
VG-520-02-S113-L10T 1 1/8-7
"L" Dim
9.95"
11.95"
S
P
11.95"
7.45"
S
P
7.45"
9.95"
S
P
9.95"
11.95"
11.95"
2.76
2.08
1.69
1.31
.25
.20
.20
.18
.18
VG-534
VG-538
VG-504
VG-506
VG-512
4.84
4.84
4.32
.22
VG-514N
.12
501D
High
er
Capa Load
cities
Articulating Leveler
with Solid Base
Conveyor and machinery support
15
Maximum Recommended
Static Load: 3000 lbs.
Includes 2:1 safety factor.
15
Y!
ITAR
SAN
.22
VG-514
2 screws
included
with each
1.90
.90
2.38
VG-501D-01-S12-L3
Part Number
Stem
Thread
VG-501D-01-P12-L3
1/2-13
VG-501D-01-S12-L3
1/2-13
VG-501D-01-P58-L3
5/8-11
VG-501D-01-S58-L3
5/8-11
VG-501D-01-P58-L8
5/8-11
VG-501D-01-S58-L8
5/8-11
VG-501D-01-P34-L8
3/4-10
VG-501D-01-S34-L8
3/4-10
VG-501D-01-P34-L10
3/4-10
VG-501D-01-S34-L10
3/4-10
VG-501D-01-PM12-L3
M12
VG-501D-01-SM12-L3
M12
VG-501D-01-PM16-L3
M16
VG-501D-01-SM16-L3
M16
VG-501D-01-PM16-L8
M16
VG-501D-01-SM16-L8
M16
VG-501D-01-PM20-L8
M20
VG-501D-01-SM20-L8
M20
Stem Material
Zinc Stainless
"L" Dim
4.54"
S
4.54"
4.54"
S
P
4.54"
7.71"
S
P
7.71"
7.71"
S
P
7.71"
10.71"
S
P
10.71"
4.51"
S
P
4.51"
4.51"
S
P
4.51"
7.71"
S
P
7.71"
7.71"
7.71"
369
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
VG-516
.11
.11
.16
505D
Articulating Leveler with Solid Base
Conveyor and machinery support. Units with M16-L3 threads, with or without
lag holes, may be used with VG-400 series bipods and tripods.
Maximum Recommended Static Load: 3000 lbs. Includes 2:1 safety factor.
Base Material: Reinforced polyamide
VG-505D-01-
VG-505D-02-
15
15
Part Number
Without Lag Holes
With Two Lag Holes
Stem
Thread
VG-505D-01-P38-L3
VG-505D-02-P38-L3
3/8-16
VG-505D-01-S38-L3
VG-505D-02-S38-L3
3/8-16
VG-505D-01-P12-L3
VG-505D-02-P12-L3
1/2-13
VG-505D-01-S12-L3
VG-505D-02-S12-L3
1/2-13
VG-505D-01-P12-L5
VG-505D-02-P12-L5
1/2-13
VG-505D-01-S12-L5
VG-505D-02-S12-L5
1/2-13
VG-505D-01-P58-L3
VG-505D-02-P58-L3
5/8-11
VG-505D-01-S58-L3
VG-505D-02-S58-L3
5/8-11
VG-505D-01-P58-L5
VG-505D-02-P58-L5
5/8-11
VG-505D-01-S58-L5
L
.35
1.10
.63
2.13 BC
3.15
VG-505D-02-S58-L5
5/8-11
VG-505D-01-PM10-L3
VG-505D-02-PM10-L3
M10
VG-505D-01-SM10-L3
VG-505D-02-SM10-L3
M10
VG-505D-01-PM12-L3
VG-505D-02-PM12-L3
M12
VG-505D-01-SM12-L3
VG-505D-02-SM12-L3
M12
VG-505D-01-PM12-L5
VG-505D-02-PM12-L5
M12
VG-505D-01-SM12-L5
VG-505D-02-SM12-L5
M12
VG-505D-01-PM16-L3
VG-505D-02-PM16-L3
M16
VG-505D-01-SM16-L3
VG-505D-02-SM16-L3
M16
VG-505D-01-PM16-L5
VG-505D-02-PM16-L5
M16
VG-505D-01-SM16-L5
VG-505D-02-SM16-L5
M16
Stem Material
Zinc Stainless
"L" Dim
3.74"
S
3.74"
3.74"
S
P
3.74"
5.93"
S
P
5.93"
3.74"
S
P
3.74"
5.93"
S
P
5.93"
3.74"
S
P
3.74"
3.74"
S
P
3.74"
5.93"
S
P
5.93"
3.74"
S
P
3.74"
5.93"
5.93"
525
Support Leveler
with Solid Base
3
2.15"
1.35"
.90"
;;;
2.75"
.53"
2.0"
3.50"
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
370
Part Number
Stem
Thread
VG-525-02-P34-L7K
3/4-10
VG-525-02-S34-L7K
3/4-10
VG-525-02-P100-L7K
1-8
VG-525-02-S100-L7K
1-8
VG-525-02-P113-L7K
1 1/8-7
VG-525-02-S113-L7K
1 1/8-7
VG-525-02-P125-L7K
1 1/4-7
VG-525-02-S125-L7K
1 1/4-7
VG-525-02-PM20-L7K
M20
VG-525-02-SM20-L7K
M20
VG-525-02-PM24-L7K
M24
VG-525-02-SM24-L7K
M24
Stem Material
Zinc Stainless
"L" Dim
7.25"
S
7.25"
7.25"
S
P
7.25"
7.25"
S
P
7.25"
7.25"
S
P
7.25"
7.25"
S
P
7.25"
7.25"
7.25"
511B
Socket Style
VG-511B-01
VG-511B-03
VG-511B-02
VG-511B-04
Part Number
With One Lag Hole
VG-511B-01-S12
VG-511B-01-S58
VG-511B-01-S34
VG-511B-03-S12
VG-511B-03-S58
VG-511B-03-S34
VG-511B-02-S12
VG-511B-02-S58
VG-511B-02-S34
;;;
;;;
Stem
Thread
VG-511B-04-S12
VG-511B-04-S58
VG-511B-04-S34
1/2-13
5/8-11
3/4-10
15 15
.48
VG-512
1.35
.73
Vibration Pad
Neoprene rubber. Fits any VG-511 series leveler.
Sold separately. See page 369.
2.92 BC
4.0
.10
with pad
238
513B
Threaded Rod
Socket Style
Machinery support.
Maximum Recommended
Static Load: 4400 lbs.
Includes 2:1 safety factor.
Do It Yourself!
Mix and match
threaded rods
with bases.
Stem
Thread
VG-513B-01-S34
3/4-10
15 15
Rod Material: Carbon, stainless or plated steel.
1.77
Part Number
Stem
Stem Material
Thread Carbon Zinc Stainless
VG-238-C12-03
1/2-13
VG-238-P12-03
1/2-13
VG-238-S12-03
1/2-13
VG-238-C58-03
5/8-11
VG-238-P58-03
5/8-11
VG-514
VG-238-S58-03
5/8-11
Vibration Pad
VG-238-C34-03
3/4-10
VG-238-P34-03
3/4-10
VG-238-S34-03
3/4-10
4.84
VG-238-CM12-03
M12
VG-238-PM12-03
M12
VG-514N
VG-238-SM12-03
M12
Vibration Pad
VG-238-CM16-03
M16
VG-238-PM16-03
M16
VG-238-SM16-03
M16
371
C
P
S
C
P
S
C
P
S
C
P
S
C
P
S
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
2.26
) _________________________________________________ Fax (
) ____________________________________
15 15
15 15
1515
15 15
15 15
L
1.58
VG-533
2.0
2.38
3.15
VG-501
VG-501-T
VG-537
2 2
4.0
VG-505
2 2
4.33
VG-518
VG-511
VG-511-T
2 2
5 5
2 2
15 15
;;;;;
;;;;;
4.84
VG-513
3.50
2.0
VG-525
4.84
4.84
VG-517-K
VG-520
4.84
4.84
VG-520-K
VG-520-T
Select Modifications:
Reinforced polyamide Reinforced polypropylene
Standard Solid Urethane filled
0 1 2
Yes No
Plated steel 304 stainless steel 316 stainless steel
Overall leveler height (L) _____________ Socket style
Thread diameter____________________
Screwdriver slot (min.100 pieces ordered)
Wrench Flat (min. 100 pieces ordered)
OTHER: ____________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
BASE MATERIAL:
BASE CONFIGURATION:
LAG HOLES REQUIRED:
VIBRATION PADS REQUIRED:
STEM MATERIAL:
STEM REQUIREMENTS:
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
372
1.13"
1.88"
15 15
592
Part Number
Stem
Thread
Metal Leveler
VG-592-01-P12-L3
1/2-13
VG-592-01-S12-L3
1/2-13
VG-592-01-P12-L5
1/2-13
Maximum Recommended
Static Load: 5000 lbs.
Includes 2:1 safety factor.
VG-592-01-S12-L5
1/2-13
594
1.25"
M12
VG-592-01-SM12-L3
M12
VG-594-01-P58-L3
5/8-11
VG-594-01-S58-L3
5/8-11
VG-594-01-P58-L5
5/8-11
VG-594-01-S58-L5
5/8-11
Maximum Recommended
Static Load: 6000 lbs.
Includes 2:1 safety factor.
VG-594-01-PM16-L3
M16
VG-594-01-SM16-L3
M16
Metal Leveler
VG-592-01-PM12-L3
Stem Material
Zinc Stainless "L" Dim
3.13"
S
3.13"
5.13"
3.13"
3.25"
5.25"
3.25"
5.13"
3.13"
3.25"
5.25"
3.25"
2.50"
596
15 15
1.5"
Part Number
Stem
Thread
Metal Leveler
VG-596-01-P34-L3
3/4-10
VG-596-01-S34-L3
3/4-10
VG-596-01-P34-L5
3/4-10
Maximum Recommended
Static Load: 7200 lbs.
Includes 2:1 safety factor.
VG-596-01-S34-L5
3/4-10
VG-596-01-PM20-L3
M20
VG-596-01-SM20-L3
M20
VG-598-01-P100-L6
1-8
VG-598-01-S100-L6
1-8
VG-598-01-P100-L10
1-8
VG-598-01-S100-L10
1-8
Stem Material
Zinc Stainless "L" Dim
3.5"
S
3.5"
5.5"
3.5"
6.13"
9.88"
5.5"
3.5"
3.0"
15 15
598
Equipment and machine
support requiring a metal leveler.
Maximum Recommended
Static Load: 22000 lbs.
Includes 2:1 safety factor.
1.88"
6.13"
9.88"
4.0"
373
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Metal Leveler
592B
Part Number
Stem
Thread
Socket Style
VG-592B-01-P12
1/2-13
VG-592B-01-S12
1/2-13
VG-592B-01-PM12
M12
VG-592B-01-SM12
M12
15 15
1.13"
1.88"
Stem Material
Zinc
Stainless
P
S
P
S
594B
VG-594B-01-P58
5/8-11
Socket Style
VG-594B-01-S58
5/8-11
VG-594B-01-PM16
M16
VG-594B-01-SM16
M16
15 15
1.25"
2.50"
P
S
P
S
596B
VG-596B-01-P34
3/4-10
Socket Style
VG-596B-01-S34
3/4-10
VG-596B-01-PM20
M20
VG-596B-01-SM20
M20
Socket Style
VG-598B-01-P100
1-8
VG-598B-01-S100
1-8
15 15
1.5"
3.0"
P
S
P
S
598B
15 15
1.88"
4.0"
P
S
580-NY
Adjustable Glides
(Nylon Base)
Part Number
Stem
Thread
VG-580-NY-P516-L2
5/16-18
Maximum Recommended
Static Load: 100 lbs.
Includes 2:1 safety factor.
VG-580-NY-B516-L2
5/16-18
580-NE
Adjustable Glides
(Neoprene Base)
Base Material: Nylon base with zinc or black plated steel finish.
Rockwell rating of base: R105 to R118 steel finish.
Maximum Recommended
Static Load: 300 lbs.
(5/16-18 thread: 100 lbs.)
Includes 2:1 safety factor.
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
374
Steel Finish
Zinc Black
P
B
1.0"
0.63" 2.13"
1.0"
0.63" 2.13"
Base Material: Neoprene base with zinc or black plated steel finish.
Shore rating of base: 70 to 80
Part Number
Stem
Thread
VG-580-NE-P516-L2
5/16-18
VG-580-NE-B516-L2
5/16-18
VG-580-NE-P38-L4
3/8-16
VG-580-NE-B38-L4
3/8-16
VG-580-NE-P12-L3
1/2-13
VG-580-NE-B12-L3
1/2-13
Steel Finish
Zinc Black
P
B
P
1.0"
0.81" 2.31"
1.0"
0.81" 2.31"
Post Caps
307
Post Cap
Holds support legs made of 1-1/2 pipe or
2 inch OD tubing. Adapts to a variety of
mounting configurations. Stainless steel
tightening hardware included.
Accepts
1-1/2"
sq. tube
3.92
2.75
2.98
2.00
.58
3.92
Accepts
1-1/2" pipe
2.75
Pipe Size
VG-307-1.50
1-1/2
Tube Size
VG-307-T2.0
2 (OD)
VG-307SQ-T1.50
1-1/2 SQ.
1.50
1.50
1.90
1.90
2.0
1-1/2"
Sq.
Tube
1-1/2"
Sq.
Tube
1-1/2"
Sch. 5
Pipe
1-1/2"
Sch. 10
Pipe
2" Tube
.065
or .075
2.58
Part Number
.065
.109
.065
.120
.58
.38
thru 4 places
Accepts
2" OD tube
308
Post Cap
Part Number
Pipe Size
VG-308-1.50
1-1/2
VG-308-T2.0
2 (OD)
VG-308-2.00
Tube Size
3.85
.39 thru 4 places
1.16
5.12
4.00
1.90
1.90
2.0
1-1/2"
Sch. 5
Pipe
1-1/2"
Sch. 10
Pipe
2" Tube
.109
.065
2.90
.065
2.375
2"
Sch. 10
pipe
.109
2.50
3.57
VG-307
VG-311
VG-551
VG-305
375
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
VG-307
.74
.90
1.50
1.90
1.90
2.0
1-1/2"
Sq.
Tube
1-1/2"
Sch. 5
Pipe
1-1/2"
Sch. 10
Pipe
2" Tube
1.18
305
1.18
.36 thru
6.81
.44
Side Mount
Post Cap
.120
.065
.109
.065
2.25
2.40
2.58
2.58
Accepts
2" OD tube
Accepts
1-1/2" pipe
Accepts
1-1/2" sq. tube
Part Number
Pipe Size
VG-305-1.50
1-1/2
Tube Size
VG-305-T2.0
2 (OD)
VG-305SQ-T1.50
1-1/2 SQ.
2.79
14053
1.85
3.23
1.90
1.90
1-1/2"
Sch. 10
Pipe
0.67
.109
.065
39
0.
4.53
4.96
2.83
4.17
0.67
3.31
Side Mounting
Bracket
1.90
1-1/2"
Sch. 5
Pipe
Part Number
Pipe Size
14053
0.98
1-1/2"
4.53
#14 screw
1.50
1-1/2"
Sq.
Tube
C115
Connector for
Square Tubing
.120
1.50
Hardware included.
Part Number
3/8"
VG-C115
1.50
1-1/2 SQ.
3/4"
1-1/2" Square Tube
(.120 wall)
3/8 thread
1.00
1.19
311
3.30
2.65
1.90
1.90
2.0
1-1/2"
Sch. 5
Pipe
1-1/2"
Sch. 10
Pipe
2" Tube
.065
1.50
End of
horizontal
member
5.30
1.15
2.78
cL
Vertical
Member
Horizontal
Member
14729
1-1/4" pipe
1-1/4" pipe
14734
1-1/2" pipe
1-1/4" pipe
VG-311-1515
1-1/2" pipe
1-1/2" pipe
2" tube
2" tube
Part Number
1.55
2.55
VG-311-T2020
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
376
.065
.109
Connecting Joints
147 series
Extra Rigid
Connecting Joints
1.75
2.0
1-5/8" Sq.
Tube
1-3/4" Sq.
Tube
2" Sq.
Tube
.065
.065
.065
Horizontal
Member
14719
1-5/8" tube
1-5/8" tube
5.28
2.68
3.39
1.77
14720
1-3/4" tube
1-3/4" tube
5.75
3.15
3.86
2.00
14721
2" tube
2" tube
5.75
3.15
3.86
2.00
2.36
Max. recommended
tightening torque
10.85 ft-lbs
Vertical
Member
Part Number
1.63
.12
C
5.02
90
1.
0.41
.065
3.48
Connecting Joints
1.38
13827
1.53
1.90
1-1/2"
Sch. 5
Pipe
Vertical
Member
Horizontal
Member
1-1/2" pipe
1-1/2" pipe
Part Number
13827
3.94
1.90
5.55
37
2.
0.41
4.33
2.37
Part Number
Vertical
Member
Horizontal
Member
13828
2" pipe
2" pipe
2"
Sch. 10
pipe
.109
3.74
Connecting Joints
1.38
13828
1.81
2.375
377
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
1.66
1.90
1.90
2.0
1-1/4"
Sch. 10
Pipe
1-1/2"
Sch. 5
Pipe
1-1/2"
Sch. 10
Pipe
2" Tube
.109
.065
.109
2"
Sch. 10
pipe
.065
New
Design!
.109
Cross ribs
Improved load resistance
Increased thickness
Improved flex resistance
410
Type
Part Number
19.29
Tripod Base
Leg base for machinery
support. Leg inserts for
adjustable levelers, casters,
or direct floor mounting are
available. Stainless steel
tightening hardware included.
3.15
Thread
3.35
5.71
2.72
410-1.25-58
410-1.5-58
410-T2.0-58
410-2.0-58
410-1.25-M16
410-1.5-M16
410-T2.0-M16
410-2.0-M16
402
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
Type
Part Number
Thread
402-1.25-58
402-1.5-58
402-T2.0-58
402-2.0-58
402-1.25-M16
402-1.5-M16
402-T2.0-M16
402-2.0-M16
3.15
Bipod Base
3.35
5.71
2.72
17.72
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
403
Part Number
3.15
3.35
5.71
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
4.10
2.72
5/8
5/8
5/8
5/8
M16
M16
M16
M16
19.29
Type
5/8
5/8
5/8
5/8
M16
M16
M16
M16
17.72
19.29
378
403-1.25-58
403-1.5-58
403-T2.0-58
403-2.0-58
403-1.5x1.5-58
403-T2.0x1.5-58
403-2.0x1.5-58
403-1.25-M16
403-1.5-M16
403-T2.0-M16
403-2.0-M16
403-1.5x1.5-M16
403-T2.0x1.5-M16
403-2.0x1.5-M16
Type
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/2" pipe
1-1/2" pipe
1-1/2" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/2" pipe
1-1/2" pipe
1-1/2" pipe
5/8
5/8
5/8
5/8
5/8
5/8
5/8
M16
M16
M16
M16
M16
M16
M16
1.90
1.90
2.0
1-1/4"
Sch. 10
Pipe
1-1/2"
Sch. 5
Pipe
1-1/2"
Sch. 10
Pipe
2" Tube
.109
.065
.109
2.375
2"
Sch. 10
pipe
.065
.109
Type
Part Number
404-1.25-58
404-1.5-58
404-T2.0-58
404-2.0-58
404-1.5x1.5-58
404-T2.0x1.5-58
404-2.0x1.5-58
404-1.25-M16
404-1.5-M16
404-T2.0-M16
404-2.0-M16
404-1.5x1.5-M16
404-T2.0x1.5-M16
404-2.0x1.5-M16
19.29
404 series
3.15
3.35
5.71
4.10
2.72
4.13
Type
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/2" pipe
1-1/2" pipe
1-1/2" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/2" pipe
1-1/2" pipe
1-1/2" pipe
5/8
5/8
5/8
5/8
5/8
5/8
5/8
M16
M16
M16
M16
M16
M16
M16
Type
2.25
Part Number
VG-410-1.25-58
VG-410-1.5-58
VG-410-T2.0-58
VG-410-2.0-58
VG-410-1.25-M16
VG-410-1.5-M16
VG-410-T2.0-M16
VG-410-2.0-M16
R = 9.06
VG-410
Tripod Base
Leg base for machinery support. Leg
inserts for adjustable levelers, casters,
or direct floor mounting are available.
Stainless steel tightening hardware
included.
3.21
5.36
Thread
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
5/8
5/8
5/8
5/8
M16
M16
M16
M16
15.68
16.87
Type
2.25
VG-402
3.50
5.50
Bipod Base
Leg base for machinery support.
Leg inserts for adjustable levelers,
casters, or direct floor mounting are
available. Stainless steel tightening
hardware included.
15.75
16.93
379
VG-402-1.25-58
VG-402-1.5-58
VG-402-T2.0-58
VG-402-2.0-58
VG-402-1.25-M16
VG-402-1.5-M16
VG-402-T2.0-M16
VG-402-2.0-M16
Thread
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
5/8
5/8
5/8
5/8
M16
M16
M16
M16
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Part Number
Bipod Bases
Bases can be used with the following:
1.66
1.90
1.90
2.0
1-1/4"
Sch. 10
Pipe
1-1/2"
Sch. 5
Pipe
1-1/2"
Sch. 10
Pipe
2" Tube
.109
.065
.109
.065
2.375
2"
Sch. 10
pipe
.109
Type
VG-403
Bipod Base & Cross-Tie
Leg base for machinery support
plus 1-1/4 pipe cross-tie arm openings for increased lateral stability.
Leg inserts for adjustable levelers,
casters, or direct floor mounting are
available. Stainless steel tightening
hardware included.
Type
1.13
Part Number
3.50
VG-403-1.5-58
1-1/2" pipe
VG-403-T2.0-58
2" tube
VG-403-2.0-58
2" pipe
VG-403-1.5-M16 1-1/2" pipe
VG-403-T2.0-M16
2" tube
VG-403-2.0-M16
2" pipe
3.21
5.36
1.67
15.75
Type
Type
Part Number
VG-404-1.25-58
VG-404-1.5-58
VG-404-T2.0-58
VG-404-2.0-58
VG-404-1.25-M16
VG-404-1.5-M16
VG-404-T2.0-M16
VG-404-2.0-M16
VG-404
Bipod Base & Cross-Tie
3.21
5.36
1.67
15.68
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
Horiz. Tie
Thread
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
5/8
5/8
5/8
5/8
M16
M16
M16
M16
16.87
4.17
15500
3.44
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Part Number
15500
1.97
5/8
5/8
5/8
M16
M16
M16
R = 9.06
Thread
16.93
2.2
Horiz. Tie
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
1-1/4" pipe
15.75
17.13
380
Thread
2.38"
50 mm
M16
Sanitary Legs
2.37
452
450
4.00
Sanitary Leg
Weld Cap
36.5
Sanitary Leg
2.00
6.81
1.5 - 2.75
12.25
Part Number
VG-452
VG-450
Support
Member
Substructure Compatibility
1-1/4" pipe
1-1/2" pipe
2" tube
2" pipe
VG-402
VG-404 VG-410
VG-308
VG-452
VG-450
VG-305
VG-305
Side Mount
Post Cap
VG-305SQ-T1.50
for 1-1/2 inch
square tubing!
VG-307
VG-308
No Flat Surfaces =
Better Washdowns!
VG-311
VG-C115
Connector for
square tubing.
VG-311
Tee Leg Tie
Valu Guide
threaded
tube ends
(pg. 348-349).
1 or 2 inch pipe
VG-403
1 pipe
connector
Valu Guide
adjustable levelers.
381
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Leveling
adjustment with
no exposed
threads!
RH
A
D
Safety
Orange
Black
LIFT
F
l
e
ee
xid el
St
ad
k O te
ss
re
e
ac ted S
l
l
Th
B a
ain
St
Co
ROTATE
RELEASE
RH-10
RH-20
RH-30
Inches (Millimeters)
Black
Orange
RH-10-BK-MP1032-15
RH-10-OR-MP1032-15
RH-10-BK-MS1032-15
RH-10-OR-MS1032-15
RH-10-BK-MP1032-20
RH-10-OR-MP1032-20
RH-10-BK-MS1032-20
RH-10-OR-MS1032-20
RH-10-BK-MP1024-15
RH-10-OR-MP1024-15
RH-10-BK-MS1024-15
RH-10-OR-MS1024-15
RH-10-BK-MP1024-20
RH-10-OR-MP1024-20
RH-10-BK-MS1024-20
RH-10-OR-MS1024-20
RH-10-BK-MP1420-20
RH-10-OR-MP1420-20
RH-10-BK-MS1420-20
RH-10-OR-MS1420-20
RH-10-BK-MP1420-25
RH-10-OR-MP1420-25
RH-10-BK-MS1420-25
RH-10-OR-MS1420-25
RH-10-BK-MP1420-30
RH-10-OR-MP1420-30
RH-10-BK-MS1420-30
RH-10-OR-MS1420-30
RH-20-BK-MP51618-15
RH-20-OR-MP51618-15
RH-20-BK-MS51618-15
RH-20-OR-MS51618-15
RH-20-BK-MP51618-20
RH-20-OR-MP51618-20
RH-20-BK-MS51618-20
RH-20-OR-MS51618-20
RH-20-BK-MP51618-30
RH-20-OR-MP51618-30
RH-20-BK-MS51618-30
RH-20-OR-MS51618-30
RH-20-BK-MP51618-40
RH-20-OR-MP51618-40
RH-20-BK-MS51618-40
RH-20-OR-MS51618-40
RH-20-BK-MP51618-50
RH-20-OR-MP51618-50
RH-20-BK-MS51618-50
RH-20-OR-MS51618-50
RH-30-BK-MP3816-20
RH-30-OR-MP3816-20
RH-30-BK-MS3816-20
RH-30-OR-MS3816-20
RH-30-BK-MP3816-30
RH-30-OR-MP3816-30
RH-30-BK-MS3816-30
RH-30-OR-MS3816-30
RH-30-BK-MP3816-40
RH-30-OR-MP3816-40
RH-30-BK-MS3816-40
RH-30-OR-MS3816-40
RH-30-BK-MP3816-50
RH-30-OR-MP3816-50
RH-30-BK-MS3816-50
RH-30-OR-MS3816-50
RH-30-BK-MP1213-20
RH-30-OR-MP1213-20
RH-30-BK-MS1213-20
RH-30-OR-MS1213-20
RH-30-BK-MP1213-30
RH-30-OR-MP1213-30
RH-30-BK-MS1213-30
RH-30-OR-MS1213-30
RH-30-BK-MP1213-40
RH-30-OR-MP1213-40
RH-30-BK-MS1213-40
RH-30-OR-MS1213-40
RH-30-BK-MP1213-50
RH-30-OR-MP1213-50
RH-30-BK-MS1213-50
RH-30-OR-MS1213-50
RH-30-BK-MP1213-60
RH-30-OR-MP1213-60
RH-30-BK-MS1213-60
RH-30-OR-MS1213-60
RH-40-BK-MP1213-30
zinc
1.18
RH-40-BK-MP1213-40
zinc
1.57
RH-40-BK-MP1213-50
zinc
1.97
RH-40-BK-MP1213-60
zinc
2.36
10-32
0.59
10-32
0.59
10-32
0.79
10-32
0.79
10-24
0.59
10-24
0.59
10-24
0.79
10-24
0.79
1/4-20
0.79
1/4-20
0.79
1/4-20
0.98
1/4-20
0.98
1/4-20
1.18
1/4-20
1.18
5/16-18
0.59
5/16-18
0.59
5/16-18
0.79
5/16-18
0.79
5/16-18
1.18
5/16-18
1.18
5/16-18
1.57
5/16-18
1.57
5/16-18
1.97
5/16-18
1.97
3/8-16
0.79
3/8-16
0.79
3/8-16
1.18
3/8-16
1.18
3/8-16
1.57
3/8-16
1.57
3/8-16
1.97
3/8-16
1.97
1/2-13
0.79
1/2-13
0.79
1/2-13
1.18
1/2-13
1.18
1/2-13
1.57
1/2-13
1.57
1/2-13
1.97
1/2-13
1.97
1/2-13
2.36
1/2-13
2.36
RH-40
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
382
1.63
(41)
1.21
(31)
0.91
(23)
0.63
(16)
1.51
(38)
0.42
(11)
2.16
(55)
1.39
(35)
1.02
(26)
0.80
(20)
1.94
(49)
0.53
(13)
3.13
(80)
1.82
(46)
1.36
(35)
1.06
(27)
2.58
(66)
0.72
(18)
3.94
2.33
1.86
1.34
3.30
.98
RH
Female Ratchet
Handles
Safety
Orange
Black
LIFT
ROTATE
Orange
Black
RELEASE
RH-10
RH-20
RH-30
RH-40
RH-10-BK-FP1032
RH-10-OR-FP1032
RH-10-BK-FS1032
RH-10-OR-FS1032
RH-10-BK-FP1024
RH-10-OR-FP1024
RH-10-BK-FS1024
RH-10-OR-FS1024
RH-10-BK-FP1420
RH-10-OR-FP1420
RH-10-BK-FS1420
RH-10-OR-FS1420
RH-20-BK-FP1420
RH-20-OR-FP1420
RH-20-BK-FS1420
RH-20-OR-FS1420
RH-20-BK-FP51618
RH-20-OR-FP51618
RH-20-BK-FS51618
RH-20-OR-FS51618
RH-30-BK-FP51618
RH-30-OR-FP51618
RH-30-BK-FS51618
RH-30-OR-FS51618
RH-30-BK-FP3816
RH-30-OR-FP3816
RH-30-BK-FS3816
RH-30-OR-FS3816
RH-30-BK-FP1213
RH-30-OR-FP1213
RH-30-BK-FS1213
RH-30-OR-FS1213
e
l*
xid el*
ee
St
k O te
ad
ss
re
ac S
e
l
Bl ated
Th
ain
o
t
C
S
Inches (Millimeters)
B
1.63
(41)
1.21
(31)
0.91
(23)
0.63
(16
1.51
(38)
0.42
(11)
2.16
(55)
1.39
1.02
0.80
1.94
0.53
(35)
(26)
(20)
(49)
(13)
3.13
(80)
1.82
(46)
1.36
(35)
1.06
(27)
2.58
(66)
0.72
(18)
3.94
2.33
1.86
1.34
3.30
.98
10-32
10-32
10-24
10-24
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
1/2-13
1/2-13
RH-40-BK-FP1213
zinc
1/2-13
RH-40-BK-FP5811
zinc
5/8-11
*Note: Threaded inserts for female handles are made of nickel plated brass to avoid galling (surface wear) or seizing.
VG-011-01
RH-30-BK-FP3816
or
RH-30-BK-FS3816
ORDERING INFORMATION
RH-10
5 Nm or 45 in/lbs
RH-20
RH-30
RH-40
VG-205-C
3/8
RH-10-BK-MP1032-15
Stud length (male only): 15 mm or .59 in., 20 mm or .79 in , 25 mm or .98 in.,
30 mm or 1.18 in., 40 mm or 1.57 in., 50 mm or 1.97 in., 60 mm or 2.36 in.
Bolt size in metric or: 1032=10-32, 1024=10-24, 1420=1/4-20, 51618=5/16-18,
3816= 3/8-16, 1213=1/2-13
Conguration and material: M=male, F=female, P=black oxide coated steel, S=stainless steel
Color: BK= black, OR=orange
Ratchet Handle size: 10=small, 20=medium, 30=large, 40=extra large
383
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Recommended
Maximum Torque:
VG-205-B
RH
Metric Male
Ratchet Handles
For use in areas where frequent
adjusting is required, where handle
movement is restricted, or where
adjustability without tools is desired.
Reinforced polyamide handles are strong,
sanitary, and corrosion resistant. Choose
from multiple sizes, colors, and materials.
Safety
Orange
Black
LIFT
ROTATE
RELEASE
RH-10
RH-20
RH-30
l
e
xid el
tee
sS
k O te
ac d S
les
n
Bl ate
i
a
St
Co
Black
Orange
RH-10-BK-MPM5-15
RH-10-OR-MPM5-15
RH-10-BK-MSM5-15
RH-10-OR-MSM5-15
RH-10-BK-MPM5-20
RH-10-OR-MPM5-20
RH-10-BK-MSM5-20
RH-10-OR-MSM5-20
RH-10-BK-MPM5-25
RH-10-OR-MPM5-25
RH-10-BK-MSM5-25
RH-10-OR-MSM5-25
RH-10-BK-MPM6-15
RH-10-OR-MPM6-15
RH-10-BK-MSM6-15
RH-10-OR-MSM6-15
RH-10-BK-MPM6-20
RH-10-OR-MPM6-20
RH-10-BK-MSM6-20
RH-10-OR-MSM6-20
RH-10-BK-MPM6-25
RH-10-OR-MPM6-25
RH-10-BK-MSM6-25
RH-10-OR-MSM6-25
RH-10-BK-MPM6-30
RH-10-OR-MPM6-30
RH-10-BK-MSM6-30
RH-10-OR-MSM6-30
RH-20-BK-MPM8-15
RH-20-OR-MPM8-15
RH-20-BK-MSM8-15
RH-20-OR-MSM8-15
RH-20-BK-MPM8-20
RH-20-OR-MPM8-20
RH-20-BK-MSM8-20
RH-20-OR-MSM8-20
RH-20-BK-MPM8-30
RH-20-OR-MPM8-30
RH-20-BK-MSM8-30
RH-20-OR-MSM8-30
RH-20-BK-MPM8-40
RH-20-OR-MPM8-40
RH-20-BK-MSM8-40
RH-20-OR-MSM8-40
RH-20-BK-MPM8-50
RH-20-OR-MPM8-50
RH-20-BK-MSM8-50
RH-20-OR-MSM8-50
RH-30-BK-MPM10-20
RH-30-OR-MPM10-20
RH-30-BK-MSM10-20
RH-30-OR-MSM10-20
RH-30-BK-MPM10-30
RH-30-OR-MPM10-30
RH-30-BK-MSM10-30
RH-30-OR-MSM10-30
RH-30-BK-MPM10-40
RH-30-OR-MPM10-40
RH-30-BK-MSM10-40
RH-30-OR-MSM10-40
RH-30-BK-MPM10-50
RH-30-OR-MPM10-50
RH-30-BK-MSM10-50
RH-30-OR-MSM10-50
RH-30-BK-MPM12-20
RH-30-OR-MPM12-20
RH-30-BK-MSM12-20
RH-30-OR-MSM12-20
RH-30-BK-MPM12-30
RH-30-OR-MPM12-30
RH-30-BK-MSM12-30
RH-30-OR-MSM12-30
RH-30-BK-MPM12-40
RH-30-OR-MPM12-40
RH-30-BK-MSM12-40
RH-30-OR-MSM12-40
RH-30-BK-MPM12-50
RH-30-OR-MPM12-50
RH-30-BK-MSM12-50
RH-30-OR-MSM12-50
RH-30-BK-MPM12-60
RH-30-OR-MPM12-60
RH-30-BK-MSM12-60
RH-30-OR-MSM12-60
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
384
Inches (Millimeters)
ad
re
Th
M5 x .08
15
M5 x .08
15
M5 x .08
20
M5 x .08
20
M5 x .08
25
M5 x .08
25
M6 x 1
15
M6 x 1
15
M6 x 1
20
M6 x 1
20
M6 x 1
25
M6 x 1
25
M6 x 1
30
M6 x 1
30
M8 x 1.25
15
M8 x 1.25
15
M8 x 1.25
20
M8 x 1.25
20
M8 x 1.25
30
M8 x 1.25
30
M8 x 1.25
40
M8 x 1.25
40
M8 x 1.25
50
M8 x 1.25
50
M10 x 1.5
20
M10 x 1.5
20
M10 x 1.5
30
M10 x 1.5
30
M10 x 1.5
40
M10 x 1.5
40
M10 x 1.5
50
M10 x 1.5
50
M12 x 1.75
20
M12 x 1.75
20
M12 x 1.75
30
M12 x 1.75
30
M12 x 1.75
40
M12 x 1.75
40
M12 x 1.75
50
M12 x 1.75
50
M12 x 1.75
60
M12 x 1.75
60
1.63
(41)
1.21
(31)
0.91
(23)
0.63
(16)
1.51
(38)
0.42
(11)
2.16
(55)
1.39
(35)
1.02
(26)
0.80
(20)
1.94
(49)
0.53
(13)
3.13
(80)
1.82
(46)
1.36
(35)
1.06
(27)
2.58
(66)
0.72
(18)
A
D
RH
Metric Female
Ratchet Handles
Safety
Orange
Black
F
LIFT
ROTATE
RELEASE
RH-10
RH-20
RH-30
Black
Orange
RH-10-BK-FPM5
RH-10-OR-FPM5
RH-10-BK-FSM5
RH-10-OR-FSM5
RH-10-BK-FPM6
RH-10-OR-FPM6
RH-10-BK-FSM6
RH-10-OR-FSM6
RH-20-BK-FPM6
RH-20-OR-FPM6
RH-20-BK-FSM6
RH-20-OR-FSM6
RH-20-BK-FPM8
RH-20-OR-FPM8
RH-20-BK-FSM8
RH-20-OR-FSM8
RH-30-BK-FPM8
RH-30-OR-FPM8
RH-30-BK-FSM8
RH-30-OR-FSM8
RH-30-BK-FPM10
RH-30-OR-FPM10
RH-30-BK-FSM10
RH-30-OR-FSM10
RH-30-BK-FPM12
RH-30-OR-FPM12
RH-30-BK-FSM12
RH-30-OR-FSM12
e
l*
xid el*
ee
St
k O te
ss
ac ted S
l
e
l
B a
ain
Co
St
Inches (Millimeters)
ad
re
Th
1.63
(41)
1.21
(31)
0.91
(23)
0.63
(16)
1.51
(38)
0.42
(11)
2.16
(55)
1.39
(35)
1.02
(26)
0.80
(20)
1.94
(49)
0.53
(13)
3.13
(80)
1.82
(46)
1.36
(35)
1.06
(27)
2.58
(66)
0.72
(18)
M5 x .08
M5 x .08
M6 x 1
M6 x 1
M6 x 1
M6 x 1
M8 x 1.25
M8 x 1.25
M8 x 1.25
M8 x 1.25
M10 x 1.5
M10 x 1.5
M12 x 1.75
M12 x 1.75
*Note: Threaded inserts for female handles are made of nickel plated brass to avoid galling (surface wear) or seizing.
VG-245-J
VG-SSR
Round Rail
RH-10
5 Nm or 45 in/lbs
RH-20
RH-30
VG-245-HDW-02-516
Hardware Kit
VG-245-H
5/16
385
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Recommended
Maximum Torque:
Handles
1.44
1.02
Standard Duty
Handle
Sleek, medium duty
handle used for doors,
cabinets and other
applications.
Materials: Reinforced gray or black polyamide with female threaded brass insert.
.51
631
Part Number
VG-631-14
VG-631-14-GR
Color
Thread
Black
Gray
1/4-20
1/4-20
1/4-20 UNC
See Related
Products
632
Heavy Duty
Handle
Corrosion resistant design
offers exceptional durability
for doors, cabinets, cleanout panels, lift up covers
and applications requiring
a stronger handle.
Part Number
Color
Thread
VG-632-516
Black
5/16-18
.58
2.23
1.34
1.50
630
Safety Handle
Closed designed handle
allows easy opening
without pinched
fingers and scraped
knuckles when handles
are mounted side by
side on adjacent doors.
Fasteners and tube hole
caps included.
3.60 4.60
.50
.30
.90
See Related
Products
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
386
Part Number
Color
Thread
VG-630-BK
Black
M6
Hinges
2.71
1.80
633
Standard Duty Hinge
1.94
1.18
Part Number
Color
VG-633
VG-633-GR
Black
Gray
.25
.40
.27
180
.30 R
100
80
60
42
40
21
20
14
10.5
8.3
0
6
12 18
24 30
Width of door (in.)
90
634
4.0
1.97
3.13
R .35
171
(all VG-634
series)
.85
Mounting Holes:
.265 for 1/4 fasteners or
.327 for 5/16 fasteners
1/4" panel
material
.45
.72
.20
R .35
37
1.17
.82
VG-634-AA
VG-634-AA-GR
VG-634-AB
VG-634-AB-GR
VG-634-BB
VG-634-BB-GR
VG-634-CC
VG-634-CC-GR
VG-634-CD
VG-634-CD-GR
VG-634-DD
VG-634-DD-GR
Color
Fastener(in.)
Black
Gray
Black
Gray
Black
Gray
Black
Gray
Black
Gray
Black
Gray
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
.47
.50
Part Number
100
75
80
60
37.5
40
25
20
19
15
0
0
6
12 18
24 30
Width of door (in.)
635
Attractive, corrosion resistant
design offers exceptional
durability for swinging doors
and panels. Designed for 1/4
inch gap between door and
frame. Fasteners not included.
.42 .50
1.22
See Related
Products
Part Number
Color
VG-635-BK
VG-635-GR
Black
Gray
1.90
1.20
180
.24
thru hole
1.90
45
387
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
.75
400/410 series
3
1
1
1
4
1
1.54
1.93
1.93
1.93
2.52
3.84
1.56
1.93
1.93
1.93
2.56
3.84
1.00
1.22
1.22
1.22
1.57
2.48
1.00
1.18
1.18
1.18
1.57
2.36
0.35
0.43
0.43
0.43
0.53
0.81
0.37
0.51
0.51
0.51
0.59
0.91
180
Type 1
Type 3
Type 4
90
Side Mount
Post Cap
VG-305-
Post Cap
VG-308-
Post Cap
VG-307-
VG-311-
Bipod Base
Tripod Base
VG-402-
VG-410-
Adjustable Levleler
Adjustable Levleler
VG-501-
Threaded
Tube End
VG-551-
Adjustable Levleler
VG-511-
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
388
VG-501-
0.55 0.17
0.67 M5
0.67 M6
0.67 10-24 UNC
0.94 0.22
1.38 M10
40018
40012
40009
41012
40031
40014
Plastic
Fabrication
Section Overview
Premium Plastic
Materials Page
Natural UHMW
Nolu-S
Nolu-BR
BluMax
Nolu-S Rod
Page
392
390
BluMax Page
393
391
Plastic Fabrication
Natural UHMW
Standard White
Nolu-SR
Medium Gray,
Durable, Low
Friction
BluMax
Nolu-BR
Blue, Antimicrobial
Plastic
Fabrication
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
390
Plastic Fabrication
Transforming Metal
Parts to Plastic Parts
Applications
From high temperature to extremely corrosive applications, we have the
engineering know-how to design the right product. Using the most appropriate materials, we create the components which
can make virtually any application run smoother,
quieter, or more trouble-free.
General Industrial
Sanitary
Corrosive
Abrasive
High-Temperature
Anti-Static
Secondary Operations
We frequently combine our engineered plastics with different types of
metals or plastics to create unique metal/plastic or plastic/plastic hybrid
parts and custom assemblies.
Complete assemblies
Metal threaded inserts
391
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Plastic
Fabrication
Metal/plastic mating
Plastic Fabrication
No limitation on length
Materials
Nolu-S
UHMW
Nylon
Acetal
Teon
Nylatron
PVC
Polypropylene
Nolu-S Rod
Nolu-S Rod
5/8"
2.5"
1"
1.25"
Plastic
Fabrication
1.5"
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
3"
2"
392
Part Number
Diameter (in.)
Length (ft.)
012R10A-5
012R16A-5
012R20A-5
012R24A-5
012R32A-5
012R40A-5
012R48A-5
5/8
1
1-1/4
1-1/2
2
2-1/2
3
5
5
5
5
5
5
5
012R10A-10
012R16A-10
012R20A-10
012R24A-10
012R32A-10
012R40A-10
012R48A-10
5/8
1
1-1/4
1-1/2
2
2-1/2
3
10
10
10
10
10
10
10
BluMax
Antimicrobial
UHMW Products
For
Processing,
Packaging,
and
Conveying
Industries
BluMax
Markets / Applications
BluMax
UHMW Features
BluMax
Availability
Low friction
Machined shapes
Restaurant equipment
Wearstrip proles
Cutting boards
393
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Plastic
Fabrication
EU Biocidal Products Directive Existing Chemicals list Annex 1 Notication Filed: [N272] A
BluMax
Maximum
Antimicrobial Performance
Broad Spectrum Efcacy
Thermally Stable
Color Stable
Extremely Durable
Homogeneous
Plastic
Fabrication
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
394
Water Absorption
Saturation
% by wt.
D789
D570
D570
-418
160/180
Nil
(1)
6-8
(1)
THERMAL
psi
psi
psi
psi
psi
ft. lb/in2
in./in./F
Test Method
ASTM
D792
D638
D638
D638
D790
D732
D695
D785
D1822
D696
UHMW-PE
0.93
4,0005,500
80,000100,000
350
75,000
3,500
.09-.12
R64
1,000
Units
Nylon 6/6
(Polyamide)
Acetal
Teflon blend
(hi-temp material) 2.1-2.2
5,000
30
Effect of sunlight
Water Absorption
Immersion 24 Hours
% by wt.
MECHANICAL
MAX. Continuous
Service Temp In Air
MIN. Continuous
Service Temp In Air
Melting Point
Coefficient of Linear
Thermal Expansion
Hardness,
Rockwell, 73F
Coefficient of Friction
(Dry vs Steel) Dynamic
Compressive Strength
Shear Strength
Flexural Modulus
of Elasticity, 73F
Elongation
(at break), 73F
Specific Gravity
Tensile Strength
Tensile Modulus of
Elasticity, 73F
15,00016,000
.25
R120-122
90
4.7-5.4
x 10-5
335-347
-68
180
0.22-0.25
0.90
Limited
.04
R10-20
30-200
5.5
x 10-5
612-630
-100
525
0.1
(1)
6,500
R94
5.8-10.2
x 10-5
327
23
225/300
0.1
<0.1
(1)
1,5003,000
Polypropylene
0.9
Nolu-S
.94
2,660
112,000
360
600
.02-.12
8.3 x 10-5
160
0.1
acceptable
Nylatron
1.16
12,500
480,000
25
460,000
10,500
16,000
.2
M85
R115
500
220
.03
Limited
(1) Requires addition of UV stabilizer (Contact Valu Guide for further information)
Note: These are typical values intended for reference and comparison purposes only.
APPLIED LOAD
280
260
240
220
G
alu
u id
200
180
"h
3/4
160
a lf
ro u
nd
20"
140
120
100
alf round
/8" h
Moment of inertia:
Ixx = 0.0062 in4
X
Iyy = 0.0027in4
Material:
Sheath = 304 stainless steel
Insert = UHMW
80
60
40
20
.1
.2
.3
.4
.5
.6
.7
.8
.9
1.0
Deflection in Inches
395
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chemical Resistance
The following chemicals and
fluids are known to attack or be
compatible with the materials
shown below as supplied by
Solus Industrial Innovations. The
degree of compatibility is shown
by a code letter which indicates
the effect of the chemical at room
temperature. We must emphasize
that this chart should be used only
as a general guide. If more information or clarification is required,
please contact Solus Industrial
Innovations.
Where aqueous solutions are shown the concentration as a weight percentage is given.
Aq.
=
Sat.
=
Conc. =
Aqueous Solution
Saturated Aqueous Solution
Concentrated Aqueous Solution
Chemical
Acetaldehyde Aq.
40
10
Acetamide Aq.
50
Bromine Aq.
30
Cyclohexane
10
Co
nc
en
tra
Po
tio
lya
n%
mi
de
Ac
(N
eta
ylo
l
n)
UH
MW
PT
FE
Po (Hi-T
e
lyp
rop mp)
yle
Ne
ne
op
ren
eR
ub
be
r
Chemical
Co
nc
en
tra
Po
tio
lya
n%
mi
d
Ac
e
(N
eta
ylo
l
n)
UH
MW
PT
FE
Po (Hi-T
e
lyp
rop mp)
yle
Ne
ne
op
ren
eR
ub
be
r
This information, based on experience, is in line with accepted engineering practice and is believed
to be reliable. However, we do not warrant the conformity of our materials to the listed properties or
the suitability of our materials for a particular purpose.
Co
nc
en
tra
Po
tio
lya
n%
mi
de
Ac
(N
eta
ylo
l
n)
UH
MW
PT
FE
Po (Hi-T
e
lyp
rop mp)
yle
Ne
ne
op
ren
eR
ub
be
r
Chemical
0.5 B
Bromine Liquid
Cyclohexanol
Acetone
Butanol
Cyclohexanone
Acrylonitrile
Butyl Acetate
Decalin
Alcohols, Aliphatic
Butyl Phthalate
Detergents, Organic
Allyl Chloride
Butylene Glycol
Dibutylphtalate
D
-
Allyl Alcohol
Butylamine
Dichlorodifluoro Methane
Aluminum Chloride
10
20
Dichloroethylene
Aluminum Sulfate
10
Butyric Acid
Conc B
Diethyleneglycol Aq.
Ammonia Aq.
10
90
Butyrolactone
Diesel Oil
Ammonia Gas
Dimethyl Carbinol
Calcium Hypochlorite
Dimethyl Aniline
10
Camphor
Dimethyl Formamide
37
Carbon Disulfide
Dictyl Phthalate
Amyl Acetate
Carbon Tetrachloride
Dioxan
Amyl Alcohol
Carbonic Acid
10
Edible Oils
Aniline
Carnallite Aq.
10
Ethanol Aq.
10
Ether, Diethyl
Ethyl Acetate
96
10
10
Chloral Hydrate
10
Chlorine Aq.
10
Ethyl Butyrate
10
Chlorine Gas
100 C
Ethyl Chloride
Benzaldehyde
Chlorobenzene
Ethylene Chlorhydrin
Benzene
Chloroform
Ethylene Chloride
10
Ethylene Diamine
Benzyl Alcohol
10
Ethylene Dichloride
10
Sat. C
10
Ethylene Propionate
Beverages, Carbonated
Sat. C
Bitumen
Bleaching Lye
Cresols
Cresylic Acid
Fluorine
100 B
10
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
10
396
96
10
Fluothane
Freon 12
Formaldehyde Aq.
Formic Acid Aq.
40
0.1 C
10
Nitrobenzene
Nitromethane
Chemical
Co
nc
en
tra
Po
t io
lya
n%
mi
de
Ac
(N
eta
y lo
l
n)
UH
MW
PT
FE
Po (Hi-T
e
ly p
rop mp)
y le
Ne
ne
op
ren
eR
ub
be
r
Chemical
Co
nc
en
tra
Po
t io
lya
n%
mi
de
Ac
(N
eta
y lo
l
n)
UH
MW
PT
FE
Po (Hi-T
e
ly p
rop mp)
y le
Ne
ne
op
ren
eR
ub
be
r
Chemical
Co
nc
en
tra
Po
t io
lya
n%
mi
de
Ac
(N
eta
y lo
l
n)
UH
MW
PT
FE
Po (Hi-T
e
ly p
rop mp)
y le
Ne
ne
op
ren
eR
ub
be
r
Chemical Resistance
10
90
A
-
10
10
50
10
Oleic Acid
Conc B
Oleum
Furfural
50
Glycerine
Ozone
10
Heptane
Paraffin
90
Hexane
Perchlorethylene
Sodium Silicate
90
A
A
Fruit Juices
Petrol (Gasoline)
90
Petroleum Ether
10
10
Phenol Aq.
10
75
10
Phenol, molten
Stearic Acid
10
10
0.5 C
0.3 B
10
Sat. B
10
100 B
C
Sat. A
50
Tallow
60
Tar
Hydroquinone
10
Tetrachloroethylene
90
Tetrahydrofuran
Tetralin
D
-
Iodine
Isooctane
Isopropyl Alcohol
Isopropyl Ether
10
10
90
30
Thionyl Chloride
10
Thiophene
Lead Stearate
50
Toluene
Linseed Oil
Trichlorethylene
Triethanolamine
Conc A
Turpentine
90
50
10
10
Pyridine
Urea
10
Propane Gas
Vegetable Oils
Conc C
Resorcinol
Vinegar
Conc C
Salicylic Acid
Vinyl Chloride
10
Silicone Fluids
Water
Silver Nitrate
White Spirit
Methanol
Soap Solutions
Methyl Acetate
60
Xylene
Xylenol
Methyl Pyrrolidone
50
Methyl Chloride
10
Zinc Oxide
10
Mineral Oils
20
50
10
Naphthalene
Nickel Sulfate Aq.
10
397
10
10
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Chemical
Acetic acid
Acetone
Acrylonitrile
Aluminium chloride
Aluminium sulphate
Amyl alcohol
Ammonia
Ammonium chloride
Aniline
Barium chloride
Beer
Benzene
Benzic acid
Benzol
Boric acid
Brine
Butter
Butyl acetate
Butyl alcohol
Butyl glycole
Calcium chloride
Carbon sulphide
Carbon tetrachloride
Chlorine water
Chloroform
Chromic acid
Citric acid
Cyclohexane
Cyclohexanol
Decalin
Dioxane
Distilled water
Ethyl acetate
Ethyl alcohol
Ethyl cloride
Ethyl ether
Ferric chloride
Food fats
Food oils
Formaldehyde
Formic acid
Freon 12
Fresh water
Fruit juice
Gasoline
Glycerine
Hydrocloric acid
Hydrofluoric acid
Hydrogen peroxide
Isopropyl alcohol
Lactic acid
Linseed oil
Magnesium chloride
Methyl acetate
Methyl alcohol
Methylene chloride
Milk
Acetal
Resin
PBT
Polyester
(NG)
400 series
Stainless
Steel
304
Stainless
Steel
Conc.% Result
Conc.% Result
Conc.% Result
Conc.% Result
10
-
5-50
-
10
-
10
70
100
10
25
10
-
10
Mineral oil
Nitric acid
Nitrobenzene
Oleic acid
Oxalic acid
Paraffin
Petroleum
Petroleum ether
Phenol
Phosphoric acid
Potassium bichromate
Potassium bromide
Potassium hydroxide
Potassium permanganate
Sea water
Silicone oil
Silver nitrate
Sodium carbonate
Sodium chloride
Sodium hydroxide
Sodium hypochlorite
Sodium silicate
Sodium sulphate
Soft drinks
Suds
Sulphuric acid
Tartaric acid
Tetrahydrofuran
Tetralin
Tincture of iodine
Toluol
Transformer oil
Trichloroethylene
Triethanolamin
Turpentine
Vaseline
Vegetable juice
Vegetable oils
Vinegar
Water and soap
Whisky
Wine
Xylol
100
-
Chemical
20
25
-
10
-
100
10
35
Acetal
Resin
PBT
Polyester
(NG)
400 series
Stainless
Steel
304
Stainless
Steel
Conc.% Result
Conc.% Result
Conc.% Result
Conc.% Result
65
-
10
25
10
65
-
50
-
5
-
100
100
100
5
-
40
30
10
-
50
-
Data shown in this table was taken from laboratory tests performed on unstrained samples
and are merely indicative. Chemical resistance under normal working conditions can
depend on various factors, such as stress and temperature, concentration of the chemical
agent and duration of its effects.
10
-
80
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
398
Index
Product Description Index
1400 chain series, 55
1700 chain series, 50
1701 chain series, 52
1702 chain series, 50
1843 chain series, 46
1863 chain series, 47
1873 chain series, 42, 48
600 chain series, 54
812 chain series, 6
815 chain series, 6, 8
820 chain series, 16
821 chain series, 22
828 chain series, 20
831 chain series, 18
843 chain series, 44
863 chain series, 45
878 chain series, 24, 34, 40
879 chain series, 26, 28, 36
880 chain series, 26, 28
881 chain series, 10, 12, 14
8810 chain series, 10, 12
882 chain series, 30, 32, 38
Accessory Holder, 308-309
Adjustable Glides, 374
Adjustable Knob Assembly, 279
Adjustable Leveler, 359-374
Adjustable Metal Leveler, 373-374
Adjustable Support Bar, 300
Adjusting Rods, 207-208, 272-273
Aluminum Guide Rail, 255-261
Backing Plate, 213
Bar Caps, 240-243
Bars Covers, 253-254
BeadRail, 227
BeadWall, 228
Bearings, Flange, 140-145, 150-159, 164-165
Bearings, Roller, 338-339, 343-344
Belt Guide, Conveyor, 137
Belt Side Guide, 112-114
Belt Support Wear Strip, 113
Bipod Base, 378-380
BluMax, 393-394
Body Guides, 245
Bolt Slot Cover, 232
Bottle Indicator, 311
Braced Angle Bracket, 231
Brackets, 267-271, 274-281, 284-298
Cable Guides, 136-138
Cable Pulleys, 136-137
Case/Crate Conveyor Chains, 54-55
Chain Guide, 126-129, 138, 188-189
Chain Return Shoe, 119-120, 127, 255
Channel Clamps, 126, 254
Chemical Resistance, 397-398
Clamp and Metal Rod , 205, 215
Combiner Bracket, 231
Combiner Section Ends, 231
Connecting Joints, 377
Corner Block, 201
Corner Clip, 232
Cross Blocks, 303-307, 314
Cross Clamp, 309
Dogbone, 261
Double Rail Clamps, 203
Drip Pan Holders, 302
Part Number Index (As a cross reference, some Solus part numbers are preceded (=) by the corresponding System Plast code).
012R, 344, 392
10001, 6
10002, 6
10003, 6
10004, 6
10005, 6
10006, 6
10007, 6
10009, 6
10011, 6
10012, 6
10013, 6
10014, 6
10016, 6
10018, 6
10019, 6
10020, 6
10021, 6
10034, 6
10080, 8
10085, 8
10107, 10
10108, 10
10109, 10
10110, 12
10111, 12
10112, 12
10201, 14
10203, 14
10206, 14
10250, 14
10260, 14
10265, 14
10302, 6
10304, 6
10305, 6
10306, 6
10307, 6
10400, 10
10401, 10
10402, 10
10403, 12
10404, 12
10405, 12
11002, 22
11004, 22
11006, 22
11007, 54
11008, 55
11009, 54
11010, 55
11040, 32
11041, 32
11042, 32
11043, 32
11053, 58
11054, 58
11055, 56
11056, 56
11057, 56
11068, 62
11069, 62
11070, 60
11071, 60
11072, 62
11073, 64
11074, 64
11075, 64
11093, 38
11094, 38
11095, 38
11100, 16
11102, 16
11103, 16
11104, 16
11105, 18
11106, 18
11107, 18
11130, 20
11132, 20
11134, 20
11151, 16
11154, 16
11155, 16
11156, 16
11160, 18
11161, 18
11162, 18
11170, 22
11171, 22
11172, 22
11185, 26
11187, 26
11193, 26
11194, 26
11195, 28
11197, 28
11198, 28
11199, 28
11242, 36
11245, 36
11362, 16
11365, 16
11368, 16
11371, 16
11374, 16
11377..., 28
11380..., 28
11383, 26
11386, 26
11388, 66
11390, 24
11391, 34
11407, 40
11408, 40
11409, 40
11420, 24
11422, 24
11429, 46
11430, 46
11433, 46
11434, 46
11459, 30
11460, 30
11461, 30
11462, 30
399
11463, 30
11464, 30
11480, 30
11481, 30
11482, 30
11483, 32
11484, 32
11485, 32
11486, 32
11500, 28
11501, 28
11502, 26
11503, 26
11504, 28
11505, 28
11506, 26
11507, 26
11508, 26
11509, 26
11510, 22
11511, 22
11512, 22
11513, 32
11514, 32
11515, 32
11516, 32
11518, 44
11519, 44
11521, 44
11522, 44
11523, 45
11524, 45
11525, 45
11526, 45
11527, 45
11528, 45
11529, 45
11530, 45
11531, 48
11532, 48
11533, 48
11534, 48
11543, 46
11544, 46
11545, 46
11546, 46
11547, 47
11552, 47
11557, 47
11562, 47
11594, 44
11598, 44
11607, 18
11608, 18
11609, 18
11634, 48
11635, 48
11636, 48
11637, 48
11664, 48
11665, 48
11666, 48
11667, 48
11721, 44
11724, 44
11736, 40
11737, 40
11738, 40
11740, 40
11742, 40
11744, 40
11762, 42
11763, 42
11766, 42
11767, 42
11775, 42
11776, 42
11779, 42
11780, 42
11781, 42
11782, 42
11783, 42
11784, 42
11951, 50
11952, 50
11953, 50
11954, 50
11955, 50
11956, 52
11958, 52
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Index
Part Number Index (Cont.)
121125 =
121126S =
121127S =
121128S =
121129S =
121147S =
121148S =
121149S =
121150S =
121151S =
121152S =
121153S =
121154S =
121155S =
121156S =
121157S =
121158S =
121159S =
121160S =
121161S =
121162S =
121163S =
121164S =
121165S =
121166S =
121199 =
121200S =
121201S =
121202S =
121203S =
121217 =
121239S =
121240S =
121241S =
121242S =
121243S =
121244S =
121245S =
121246S =
121247S =
121248S =
121249S =
121250S =
121251S =
121252S =
121253S =
121254S =
121255S =
121256S =
121257S =
121258S =
121307 =
121308S =
121309S =
121310S =
121311S =
121329S =
121330S =
121331S =
121332S =
121333S =
121334S =
121335S =
121336S =
121337S =
121338S =
121339S =
121340S =
121341S =
121342S =
121343S =
121344S =
121550 =
125595 =
121752S =
121753S =
121754S =
121755S =
121756S =
121757S =
121758S =
121759S =
121760S =
121761S =
121762S =
121763S =
121764S =
820-27MP-.71, 92
820-27MP-1, 92
820-27MP-1.25, 92
820-27MP-1.44, 92
820-27MP-1.5, 92
820-19MP-IDL-1, 92
820-19MP-IDL-1.25, 92
820-19MP-IDL-1.44, 92
820-19MP-IDL-1.5, 92
820-21MP-IDL-1, 92
820-21MP-IDL-1.25, 92
820-21MP-IDL-1.44, 92
820-21MP-IDL-1.5, 92
820-23MP-IDL-1, 92
820-23MP-IDL-1.25, 92
820-23MP-IDL-1.44, 92
820-23MP-IDL-1.5, 92
820-25MP-IDL-1, 92
820-25MP-IDL-1.25, 92
820-25MP-IDL-1.44, 92
820-25MP-IDL-1.5, 92
820-27MP-IDL-1, 92
820-27MP-IDL-1.25, 92
820-27MP-IDL-1.44, 92
820-27MP-IDL-1.5, 92
815-27MP-.71, 86
815-27MP-1, 86
815-27MP-1.25, 86
815-27MP-1.44, 86
815-27MP-1.5, 86
881-27MP-.71, 90
815-19MP-IDL-1, 86
815-19MP-IDL-1.25, 86
815-19MP-IDL-1.44, 86
815-19MP-IDL-1.5, 86
815-21MP-IDL-1, 86
815-21MP-IDL-1.25, 86
815-21MP-IDL-1.44, 86
815-21MP-IDL-1.5, 86
815-23MP-IDL-1, 86
815-23MP-IDL-1.25, 86
815-23MP-IDL-1.44, 86
815-23MP-IDL-1.5, 86
815-25MP-IDL-1, 86
815-25MP-IDL-1.25, 86
815-25MP-IDL-1.44, 86
815-25MP-IDL-1.5, 86
815-27MP-IDL-1, 86
815-27MP-IDL-1.25, 86
815-27MP-IDL-1.44, 86
815-27MP-IDL-1.5, 86
821-27MP-.71, 94
821-27MP-1, 94
821-27MP-1.25, 94
821-27MP-1.44, 94
821-27MP-.1.5, 94
821-21MP-IDL-1, 94
821-21MP-IDL-1.25, 94
821-21MP-IDL-1.44, 94
821-21MP-IDL-1.5, 94
821-23MP-IDL-1, 94
821-23MP-IDL-1.25, 94
821-23MP-IDL-1.44, 94
821-23MP-IDL-1.5, 94
821-25MP-IDL-1, 94
821-25MP-IDL-1.25, 94
821-25MP-IDL-1.44, 94
821-25MP-IDL-1.5, 94
821-27MP-IDL-1, 94
821-27MP-IDL-1.25, 94
821-27MP-IDL-1.44, 94
821-27MP-IDL-1.5, 94
R3-20-60, 109-110, 320-321
R3-20-60, 109-110, 320-321
880-9MP-IDL-1, 95
880-9MP-IDL-1.25, 95
880-9MP-IDL-1.44, 95
880-9MP-IDL-1.5, 95
880-10MP-IDL-1, 95
880-10MP-IDL-1.25, 95
880-10MP-IDL-1.44, 95
880-10MP-IDL-1.5, 95
880-11MP-IDL-1, 95
880-11MP-IDL-1.25, 95
880-11MP-IDL-1.44, 95
880-11MP-IDL-1.5, 95
880-12MP-IDL-1, 95
121765S =
121766S =
121767S =
121768S =
121769S =
121770S =
121771S =
121772S =
121773S =
121774S =
121775S =
121776S =
121777S =
121778S =
121779S =
121965 =
121965RN =
121966 =
121966RN =
121969F =
121969RNF=
121970F =
121970RNF=
121985 =
121985RN =
121987 =
121987RN =
121991 =
121991RN =
121993 =
121993RN =
122111RN =
122111V =
122114RN =
122114V =
12284S =
12285S =
12286S =
12287S =
12288S =
12289S =
12290S =
12291S =
12292S =
12293S =
12294S =
12295S =
12346S =
12347S =
12347SK =
12348S =
12349S =
12350S =
12350SK =
12351S =
12352S =
12353S =
12353SK =
12354S =
12355S =
12356S =
12356SK =
12357S =
12382S =
12383S =
12384S =
12385S =
12386S =
12387S =
12388S =
12389S =
12390S =
12391S =
12392S =
12393S =
12394S =
12395S =
12396S =
12397S =
12529S =
12530S =
12534 =
12535RN =
12535V =
12536RN =
12536V =
12538S =
12539S =
880-12MP-IDL-1.25, 95
880-12MP-IDL-1.44, 95
880-12MP-IDL-1.5, 95
882-9MP-IDL-1, 97
882-9MP-IDL-1.25, 97
882-9MP-IDL-1.5, 97
882-10MP-IDL-1, 97
882-10MP-IDL-1.25, 97
882-10MP-IDL-1.5, 97
882-11MP-IDL-1, 97
882-11MP-IDL-1.25, 97
882-11MP-IDL-1.5, 97
882-12MP-IDL-1, 97
882-12MP-IDL-1.25, 97
882-12MP-IDL-1.5, 97
R15-18-50, 109, 320
R15B-18-50, 110, 321
R15-20-50, 109, 320
R15B-20-50, 110, 321
RF15-18-50, 109, 320
RF15B-18-50, 111, 322
RF15-20-50, 109, 320
RF15B-20-50, 111, 322
RP3-18-50, 111, 322
RP3B-18-50, 111, 322
RP3-18-60, 111, 322
RP3B-18-60, 111, 322
RP3-20-50, 111, 322
RP3B-20-50, 111, 322
RP3-20-60, 111, 322
RP3B-20-60, 111, 322
R15B-18-60, 110, 321
R15-18-60, 109, 320
RF15B-18-60, 111, 322
RF15-18-60, 109, 320
821-21MP-1, 94
821-21MP-1.25, 94
821-21MP-1.44, 94
821-21MP-.1.5, 94
821-23MP-1, 94
821-23MP-1.25, 94
821-23MP-1.44, 94
821-23MP-.1.5, 94
821-25MP-1, 94
821-25MP-1.25, 94
821-25MP-1.44, 94
821-25MP-.1.5, 94
882-9MP-1, 97
882-9MP-1.25, 97
882-9MP-1.44, 97
882-9MP-1.5, 97
882-10MP-1, 97
882-10MP-1.25, 97
882-10MP-1.44, 97
882-10MP-1.5, 97
882-11MP-1, 97
882-11MP-1.25, 97
882-11MP-1.44, 97
882-11MP-1.5, 97
882-12MP-1, 97
882-12MP-1.25, 97
882-12MP-1.44, 97
882-12MP-1.5, 97
880-9MP-1, 95
880-9MP-1.25, 95
880-9MP-1.44, 95
880-9MP-1.5, 95
880-10MP-1, 95
880-10MP-1.25, 95
880-10MP-1.44, 95
880-10MP-1.5, 95
880-11MP-1, 95
880-11MP-1.25, 95
880-11MP-1.44, 95
880-11MP-1.5, 95
880-12MP-1, 95
880-12MP-1.25, 95
880-12MP-1.44, 95
880-12MP-1.5, 95
815-19MP-1, 86
815-19MP-1.25, 86
RF-20-70, 111, 322
R15B-20-60, 110, 321
R15-20-60, 109, 320
RF15B-20-60, 111, 322
RF15-20-60, 109, 320
815-19MP-1.44, 86
815-19MP-1.5, 86
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
12540S = 815-21MP-1, 86
12541S = 815-21MP-1.25, 86
12542S = 815-21MP-1.44, 86
12543S = 815-21MP-1.5, 86
12544S = 815-23MP-1, 86
12545S = 815-23MP-1.25, 86
12546S = 815-23MP-1.44, 86
12547S = 815-23MP-1.5, 86
12548S = 815-25MP-1, 86
12549S = 815-25MP-1.25, 86
12550S = 815-25MP-1.44, 86
12551S = 815-25MP-1.5, 86
12730 = 1700-8MP-.75, 99
12745 = 1700-10MP-.75, 99
12750 = 1700-13MP-.75, 99
12763 = RF3-20-50, 109, 320
12763RNF = RF3B-20-50, 111, 322
12831 = R3-18-50, 109, 320
12831RN = R3B-18-50, 110, 321
12833 = RF3-18-50, 109, 320
12833RNF = RF3B-18-50, 111, 322
12835 = R3-18-60, 109, 320
12835RN = R3B-18-60, 110, 321
12836 = R3-20-60, 109, 320
12836RN = R3B-20-60, 110, 321
12837 = RF3-18-60, 109, 320
12837RNF = RF3B-18-60, 111, 322
12838 = RF3-20-60, 109, 320
12838RNF = RF3B-20-60, 111, 322
12841 = RF-18-70, 111, 322
12892 = R3-20-50, 109, 320
12892RN = R3B-20-50, 110, 321
12901 = 821-21MP-.71, 94
12902 = 821-23MP-.71, 94
12903 = 821-25MP-.71, 94
12905 = 815-19MP-.71, 86
12906 = 815-21MP-.71, 86
12907 = 815-23MP-.71, 86
12908 = 815-25MP-.71, 86
12910 = 880-9MP-.71, 95
12911 = 880-10MP-.71, 95
12912 = 880-11MP-.71, 95
12913 = 880-12MP-.71, 95
12914 = 882-9MP-.71, 97
12915 = 882-10MP-.71, 97
12916 = 882-11MP-.71, 97
12917 = 882-12MP-.71, 97
12924S = 820-19MP-1, 92
12925S = 820-19MP-1.25, 92
12926S = 820-19MP-1.44, 92
12927S = 820-19MP-1.5, 92
12928S = 820-21MP-1, 92
12929S = 820-21MP-1.25, 92
12930S = 820-21MP-1.44, 92
12931S = 820-21MP-1.5, 92
12932S = 820-23MP-1, 92
12933S = 820-23MP-1.25, 92
12934S = 820-23MP-1.44, 92
12935S = 820-23MP-1.5, 92
12936S = 820-25MP-1, 92
12937S = 820-25MP-1.25, 92
12938S = 820-25MP-1.44, 92
12939S = 820-25MP-1.5, 92
12961 = 820-19MP-.71, 92
12962 = 820-21MP-.71, 92
12963 = 820-23MP-.71, 92
12964 = 820-25MP-.71, 92
12966 = 881-19MP-.71, 90
12967 = 881-21MP-.71, 90
12968 = 881-23MP-.71, 90
12969 = 881-25MP-.71, 90
13150, 311
13182, 305
13641, 267
13648, 267
13781V, 269
13783V, 269
13809, 301
13827, 377
13828, 377
13833, 238
14053, 376
141, 126-127, 258-259
14607 = VG-555-BM16, 349
14719, 377
14720, 377
14721, 377
14729, 376
400
14734, 376
14751 = VG-558-BM20, 348
14755 = VG-554-BM16, 348
14757 = VG-552-BM16, 349
14764 = VG-550-BM16, 348
14767 = VG-558-BM16, 348
14797 = VG-556-BM16, 349
15335N = 404-1.5-M16, 379
15337N = 404-T2.0-M16, 379
15339N = 404-2.0-M16, 379
15344N = 404-1.25-M16, 379
15350N = 404-1.5x1.5-M16, 379
15351N = 404-T2.0x1.5-M16, 379
15352N = 404-2.0x1.5-M16, 379
15354N = 403-1.25-M16, 378
15360N = 403-1.5x1.5-M16, 378
15361N = 403-T2.0x1.5-M16, 378
15362N = 403-2.0x1.5-M16, 378
15500, 380
15507N = 410-1.5-M16, 378
15511N = 410-2.0-M16, 378
15703N = 410-1.25-M16, 378
15725N = 402-1.5-M16, 378
15727N = 402-1.25-M16, 378
15729N = 402-T2.0-M16, 378
15731N = 402-2.0-M16, 378
15732N = 403-1.5-M16, 378
15736N = 403-T2.0-M16, 378
15738N = 403-2.0-M16, 378
15826N = 410-T2.0-M16, 378
16142, 238
16152, 238
16500, 237
16550, 237
1660, 235
1665, 235
16770, 102, 104, 106
16771, 103, 105, 107
16772, 102, 104, 106
16773, 103, 105, 107
16777, 102, 104, 106
16778, 103, 105, 107
1680, 236
1682, 236
1700-10MP-.75, 99
1700-10MP-1, 99
1700-10MP-1.25, 99
1700-10MP-1.44, 99
1700-10MP-1.5, 99
1700-10MP-IDL-1, 99
1700-10MP-IDL-1.25, 99
1700-10MP-IDL-1.44, 99
1700-10MP-IDL-1.5, 99
1700-13MP-.75, 99
1700-13MP-1, 99
1700-13MP-1.25, 99
1700-13MP-1.44, 99
1700-13MP-1.5, 99
1700-13MP-IDL-1, 99
1700-13MP-IDL-1.25, 99
1700-13MP-IDL-1.44, 99
1700-13MP-IDL-1.5, 99
1700-8MP-.75, 99
1700-8MP-1, 99
1700-8MP-1.25, 99
1700-8MP-1.44, 99
1700-8MP-1.5, 99
1700-8MP-IDL-1, 99
1700-8MP-IDL-1.25, 99
1700-8MP-IDL-1.44, 99
1700-8MP-IDL-1.5, 99
177003U, 350
177006U, 350
177010U, 350
177011U, 350
177053U, 350
177056U, 350
177060U, 350
177061U, 350
177062U, 350
177104U, 350
177105U, 350
177108U, 350
177109U, 350
177110U, 350
177158U, 350
177159U, 350
177160U, 350
177203U, 351
177205U, 351
177206U, 351
177210U, 351
177211U, 351
177254U, 351
177255U, 351
177258U, 351
177259U, 351
177260U, 351
177300U, 352
177301U, 352
177302U, 352
177303U, 352
177310U, 352
177311U, 352
177312U, 352
177313U, 352
177320U, 352
177321U, 352
177322U, 352
177323U, 352
177350U, 353
177351U, 353
177352U, 353
177353U, 353
177360U, 353
177361U, 353
177362U, 353
177363U, 353
190, 126, 235-237, 258
1950, 200
222LSB-224-, 343
256500, 68
256501, 68
256502, 68
256503, 68
256504, 68
256505, 68
256506, 68
256507, 68
256508, 68
256509, 68
256510, 68
256511, 68
256512, 68
256513, 68
256514, 68
256515, 68
256516, 68
256517, 68
256518, 68
256519, 68
256521, 68
256522, 68
256523, 68
256524, 68
256525, 68
256526, 68
256527, 68
256528, 68
256529, 68
256530, 68
256531, 68
256532, 68
256533, 68
256534, 68
256535, 68
256536, 68
256537, 68
256538, 68
256539, 68
32053 = 815-21P-1, 87
32054 = 815-21P-1.25, 87
32055 = 815-21P-1.44, 87
32056 = 815-21P-1.5, 87
32057 = 820-21P-1, 93
32058 = 820-21P-1.25, 93
32059 = 820-21P-1.44, 93
32060 = 820-21P-1.5, 93
32061 = 881-21P-1, 91
32062 = 881-21P-1.25, 91
32063 = 881-21P-1.44, 91
32064 = 881-21P-1.5, 91
32065 = 815-25P-1, 87
32066 = 815-25P-1.25, 87
Index
Part Number Index (Cont.)
32067 = 815-25P-1.44, 87
32068 = 815-25P-1.5, 87
32069 = 820-25P-1, 93
32070 = 820-25P-1.25, 93
32071 = 820-25P-1.44, 93
32072 = 820-25P-1.5, 93
32073 = 881-25P-1, 91
32074 = 881-25P-1.25, 91
32075 = 881-25P-1.44, 91
32076 = 881-25P-1.5, 91
32077B = 815-21-IDL-1, 89
32078B = 815-21-IDL-1.25, 89
32079B = 815-21-IDL-1.44, 89
32080B = 815-21-IDL-1.5, 89
32081B = 815-25-IDL-1, 89
32082B = 815-25-IDL-1.25, 89
32083B = 815-25-IDL-1.44, 89
32084B = 815-25-IDL-1.5, 89
32099 = 815-23P-1, 87
32100 = 815-23P-1.25, 87
321001 = 880-10P-1, 96
321002 = 880-10P-1.25, 96
321003 = 880-10P-1.44, 96
321004 = 880-10P-1.5, 96
321005 = 880-10P-IDL-1, 96
321006 = 880-10P-IDL-1.25, 96
321007 = 880-10P-IDL-1.44, 96
321008 = 880-10P-IDL-1.5, 96
321009 = 882-10P-1, 98
32101 = 815-23P-1.44, 87
321010 = 882-10P-1.25, 98
321011 = 882-10P-1.44, 98
321012 = 882-10P-1.5, 98
321013 = 882-10P-IDL-1, 98
321014 = 882-10P-IDL-1.25, 98
321015 = 882-10P-IDL-1.44, 98
321016 = 882-10P-IDL-1.5, 98
32102 = 815-23P-1.5, 87
32104 = 820-23P-1, 93
32105 = 820-23P-1.25, 93
32106 = 820-23P-1.44, 93
32107 = 820-23P-1.5, 93
321080 = 815-21P-IDL-1, 87
321081 = 815-21P-IDL-1.25, 87
321082 = 815-21P-IDL-1.44, 87
321083 = 815-21P-IDL-1.5, 87
321085 = 815-23P-IDL-1, 87
321086 = 815-23P-IDL-1.25, 87
321087 = 815-23P-IDL-1.44, 87
321088 = 815-23P-IDL-1.5, 87
32109 = 881-23P-1, 91
321090 = 815-25P-IDL-1, 87
321091 = 815-25P-IDL-1.25, 87
321092 = 815-25P-IDL-1.44, 87
321093 = 815-25P-IDL-1.5, 87
321095 = 820-21P-IDL-1, 93
321096 = 820-21P-IDL-1.25, 93
321097 = 820-21P-IDL-1.44, 93
321098 = 820-21P-IDL-1.5, 93
32110 = 881-23P-1.25, 91
321100 = 820-23P-IDL-1, 93
321101 = 820-23P-IDL-1.25, 93
321102 = 820-23P-IDL-1.44, 93
321103 = 820-23P-IDL-1.5, 93
321105 = 820-25P-IDL-1, 93
321106 = 820-25P-IDL-1.25, 93
321107 = 820-25P-IDL-1.44, 93
321108 = 820-25P-IDL-1.5, 93
32111 = 881-23P-1.44, 91
321110 = 881-21P-IDL-1, 91
321111 = 881-21P-IDL-1.25, 91
321112 = 881-21P-IDL-1.44, 91
321113 = 881-21P-IDL-1.5, 91
321115 = 881-23P-IDL-1, 91
321116 = 881-23P-IDL-1.25, 91
321117 = 881-23P-IDL-1.44, 91
321118 = 881-23P-IDL-1.5, 91
32112 = 881-23P-1.5, 91
321120 = 881-25P-IDL-1, 91
321121 = 881-25P-IDL-1.25, 91
321122 = 881-25P-IDL-1.44, 91
321123 = 881-25P-IDL-1.5, 91
32114 = 882-12P-1, 98
32115 = 882-12P-1.25, 98
32116 = 882-12P-1.44, 98
32117 = 882-12P-1.5, 98
32119 = 882-12P-IDL-1, 98
32120 =
32121 =
321218 =
321219 =
32122 =
321220 =
321221 =
321275 =
321276 =
321277 =
321278 =
321279 =
321280 =
321281 =
321282 =
321283 =
321284 =
321285 =
321286 =
321287 =
321288 =
321289 =
321290 =
321291 =
321292 =
321293 =
321294 =
321966RN =
321970RNF =
321991 =
321991RN =
321993 =
321993RN =
32400 =
32401 =
32402 =
32403 =
32404 =
32405 =
32406 =
32469 =
32470 =
32471 =
32472 =
32473 =
32474 =
32475 =
32476 =
32477 =
32478 =
32479 =
32480 =
32481 =
32482 =
32483 =
32484 =
32534 =
32535RN =
32536RN =
32711 =
32731 =
32732 =
32733 =
32734 =
32731SIW=
32732S1W =
32733S1W =
32734S1W =
32746SIW=
32747SIW=
32748SIW=
32749SIW=
32746 =
32747 =
32748 =
32749 =
32751 =
32752 =
32753 =
32754 =
32751SIW=
32752SIW=
32753SIW=
32754SIW=
32763RNF =
32836RN =
32838RNF =
882-12P-IDL-1.25, 98
882-12P-IDL-1.44, 98
881-27MP-1, 90
881-27MP-.1.25, 90
882-12P-IDL-1.5, 98
881-27MP-1.44, 90
881-27MP-1.5, 90
881-19MP-IDL-1, 90
881-19MP-IDL-1.25, 90
881-19MP-IDL-1.44, 90
881-19MP-IDL-1.5, 90
881-21MP-IDL-1, 90
881-21MP-IDL-1.25, 90
881-21MP-IDL-1.44, 90
881-21MP-IDL-1.5, 90
881-23MP-IDL-1, 90
881-23MP-IDL-1.25, 90
881-23MP-IDL-1.44, 90
881-23MP-IDL-1.5, 90
881-25MP-IDL-1, 90
881-25MP-IDL-1.25, 90
881-25MP-IDL-1.44, 90
881-25MP-IDL-1.5, 90
881-27MP-IDL-1, 90
881-27MP-IDL-1.25, 90
881-27MP-IDL-1.44, 90
881-27MP-IDL-1.5, 90
R15B-75-50, 110, 321
RF15B-75-50, 111, 322
RP3-75-50, 111, 322
RP3B-75-50, 111, 322
RP3-75-60, 111, 322
RP3B-75-60, 111, 322
880-12P-1, 96
880-12P-1.44, 96
880-12P-1.5, 96
880-12P-IDL-1, 96
880-12P-IDL-1.25, 96
880-12P-IDL-1.44, 96
880-12P-IDL-1.5, 96
881-19MP-1, 90
881-19MP-.1.25, 90
881-19MP-1.44, 90
881-19MP-1.5, 90
881-21MP-1, 90
881-21MP-.1.25, 90
881-21MP-1.44, 90
881-21MP-1.5, 90
881-23MP-1, 90
881-23MP-.1.25, 90
881-23MP-1.44, 90
881-23MP-1.5, 90
881-25MP-1, 90
881-25MP-.1.25, 90
881-25MP-1.44, 90
881-25MP-1.5, 90
RF-75-70, 111, 322
R15B-75-60, 110, 321
RF15B-75-60, 111, 322
880-12P-1.25, 96
1700-8MP-1, 99
1700-8MP-1.25, 99
1700-8MP-1.44, 99
1700-8MP-1.5, 99
1700-8MP-IDL-1, 99
1700-8MP-IDL-1.25, 99
1700-8MP-IDL-1.44, 99
1700-8MP-IDL-1.5, 99
1700-10MP-IDL-1, 99
1700-10MP-IDL-1.25, 99
1700-10MP-IDL-1.44, 99
1700-10MP-IDL-1.5, 99
1700-10MP-1, 99
1700-10MP-1.25, 99
1700-10MP-1.44, 99
1700-10MP-1.5, 99
1700-13MP-1, 99
1700-13MP-1.25, 99
1700-13MP-1.44, 99
1700-13MP-1.5, 99
1700-13MP-IDL-1, 99
1700-13MP-IDL-1.25, 99
1700-13MP-IDL-1.44, 99
1700-13MP-IDL-1.5, 99
RF3B-75-50, 111, 322
R3B-75-60, 110, 321
RF3B-75-60, 111, 322
32866 = 815-21LF-IDL-1, 88
32867 = 815-21LF-IDL-1.25, 88
32868 = 815-21LF-IDL-1.44, 88
32869 = 815-21LF-IDL-1.5, 88
32870 = 815-25LF-IDL-1, 88
32871 = 815-25LF-IDL-1.25, 88
32872 = 815-25LF-IDL-1.44, 88
32873 = 815-25LF-IDL-1.5, 88
32874 = 815-23LF-IDL-1, 88
32875 = 815-23LF-IDL-1.25, 88
32876 = 815-23LF-IDL-1.44, 88
32877 = 815-23LF-IDL-1.5, 88
32892RN = R3B-75-50, 110, 321
331016, 202
331018, 202
331020, 203
331022, 203
33167, 208
33168, 208
33231, 285
33262, 305
33298, 276
33313, 305
33500, 311
33509..., 306
33512..., 306
33616, 310
3392, 208
34014, 348
34018, 349
34040, 349
34200, 349
34201, 349
34211, 348
34219, 348
34221 = VG-558-B58, 348
34763, 348
34764, 348
34768 = VG-558-B34, 348
37692, 354
37710, 355
37712, 355
37713, 355
37737, 355
37738, 355
37740, 355
38309, 354
38310, 354
38321, 354
38322, 354
38324, 354
38333, 354
38334, 354
38336, 354
39044, 198
40009, 388
40012, 388
40014, 388
40018, 388
40031, 388
402-, 378
403-, 378
404-, 379
410..., 378, 388
50001..., 140, 142, 151, 154, 156, 164
50002..., 140, 142, 151-156, 164-165
50003..., 140, 142, 151-156, 164-165
50004..., 140, 142, 154, 156
50007..., 140, 142, 154, 156
50009..., 140-162
50010.., 140-162
50011..., 140, 142, 154, 156
50013..., 140-162
50014..., 140-160
50027..., 150, 153
50204L = UCFL-204-M20, 165
50204L/SS = UCFLSS-204-M20, 165
50204S = UCF-204-M20, 164
50204S/SS = UCFSS-204-M20, 164
50204SR = UCF-C204-M20, 164
50204SR/SS = UCFSS-C204-M20, 164
50204V = UCFQ-204L-M20, 154
50204V/SS = UCFQSS-204L-M20, 154
50204V/SS-W = UCFQSS-204-M20-N, 154
50204VR= UCFQ-C204L-M20, 155
50204VR/SS = UCFQSS-C204L-M20, 155
50204VR/SS-W = UCFQSS-C204-M20-N, 155
401
50204W
=
50204W/SS =
50205A
=
50205A/SS =
50205AR
=
50205AR/SS =
50205AW
=
50205AW/SS =
50205LA
=
50205LA/SS =
50205V
=
50205V/SS =
50205V/SS-W=
50205VR
=
50205VR/SS =
50205VR/SS-W =
50206
=
50206/SS
=
50206K
=
50206K/SS =
50206R
=
50206R/SS =
50206V
=
50206V/SS =
50206V/SS-W =
50206VR
=
50206VR/SS =
50206VR/SS-W =
50206X
=
50206X/SS =
50207D
=
50207D/SS =
50207G
=
50207G/SS =
50207M
=
50207M/SS =
50207N
=
50207N/SS =
50207V
=
50207V/SS =
50207V/SS-W =
50207VR
=
50207VR/SS =
50207VR/SS-W =
50208F
=
50208F/SS =
50208FR
=
50208FR/SS =
50208V
=
50208V/SS =
50208V/SS-W =
50208VR
=
50208VR/SS =
50208VR/SS-W =
52205F
=
52205F/SS =
52205F/SS-W =
52205FA
=
52205FA/SS =
52205FA/SS-W =
52205FR
=
52205FR/SS =
52205FR/SS-N=
52205FRA
=
52205FRA/SS =
52205FRA/SS-N =
52205G
=
52205G/SS =
52205GR
=
52205GR/SS =
52206F
=
52206F/SS =
52206F/SS-W =
52206FA
=
52206FA/SS =
52206FA/SS-W=
52206FR
=
52206FR/SS =
52206FR/SS-N=
52206FRA
=
52206FRA/SS =
52206FRA/SS-N =
52206G
=
52206G/SS =
52206GR
=
52206GR/SS =
53204
=
UCFL-C204-M20, 165
UCFLSS-C204-M20, 165
UCF-205-M25, 164
UCFSS-205-M25, 164
UCF-C205-M25, 164
UCFSS-C205-M25, 164
UCFL-C205-M25, 165
UCFLSS-C205-M25, 165
UCFL-205-M25, 165
UCFLSS-205-M25, 165
UCFQ-205L-M25, 154
UCFQSS-205L-M25, 154
UCFQSS-205-M25-N, 154
UCFQ-C205L-M25, 155
UCFQSS-C205L-M25, 155
UCFQSS-C205-M25-N, 155
UCF-206-M30, 164
UCFSS-206-M30, 164
UCFL-206-M30, 165
UCFLSS-206-M30, 165
UCF-C206-M30, 164
UCFSS-C206-M30, 164
UCFQ-206L-M30, 154
UCFQSS-206L-M30, 154
UCFQSS-206-M30-N, 154
UCFQ-C206L-M30, 155
UCFQSS-C206L-M30, 155
UCFQSS-C206-M30-N, 155
UCFL-C206-M30, 165
UCFLSS-C206-M30, 165
UCFL-207-M35, 165
UCFLSS-207-M35, 165
UCF-207-M35, 164
UCFSS-207-M35, 164
UCFL-C207-M35, 165
UCFLSS-C207-M35, 165
UCF-C207-M35, 164
UCFSS-C207-M35, 164
UCFQ-207L-M35, 154
UCFQSS-207L-M35, 154
UCFQSS-207-M35-N, 154
UCFQ-C207L-M35, 155
UCFQSS-C207L-M35, 155
UCFQSS-C207-M35-N, 155
UCF-208-M40, 164
UCFSS-208-M40, 164
UCF-C208-M40, 164
UCFSS-C208-M40, 164
UCFQ-208L-M40, 154
UCFQSS-208L-M40, 154
UCFQSS-208-M40-N, 154
UCFQ-C208L-M40, 155
UCFQSS-C208L-M40, 155
UCFQSS-C208-M40-N, 155
UCFA-205L-M25, 158
UCFASS-205L-M25, 158
UCFASS-205L-M25-N, 158
UCFA-205L-M20, 158
UCFASS-205L-M20, 158
UCFASS-205L-M20-N, 158
UCFA-C205L-M25, 159
UCFASS-C205L-M25, 159
UCFASS-C205L-M25-N, 159
UCFA-C205L-M20, 159
UCFASS-C205L-M20, 159
UCFASS-C205L-M20-N, 159
UCFG-205L-M25, 153
UCFGSS-205L-M25, 153
UCFG-C205L-M25, 153
UCFGSS-C205L-M25, 153
UCFA-206L-M30, 158
UCFASS-206L-M30, 158
UCFASS-206L-M30-N, 158
UCFA-206L-M25, 158
UCFASS-206L-M25, 158
UCFASS-206L-M25-N, 158
UCFA-C206L-M30, 159
UCFASS-C206L-M30, 159
UCFASS-C206L-M30-N, 159
UCFA-C206L-M25, 159
UCFASS-C206L-M25, 159
UCFASS-C206L-M25-N, 159
UCFG-206L-M30, 153
UCFGSS-206L-M30, 153
UCFG-C206L-M30, 153
UCFGSS-C206L-M30, 153
UCP-204L-M20, 160
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Index
Part Number Index (Cont.)
53204/SS
= UCPSS-204L-M20, 160
53204/SS-W = UCPSS-204L-M20-N, 160
53204A/SS-U = UCPASS-204-M20, 162
53204A/SS-U-W = UCPASS-204-M20-N, 162
53204AR/SS-U = UCPASS-C204-M20, 163
53204AR/SS-U-W = UCPASS-C204-M20-N, 163
53204AR-U = UCPA-C204-M20, 163
53204A-U
= UCPA-204-M20, 162
53204R
= UCP-C204L-M20, 161
53204R/SS = UCPSS-C204L-M20, 161
53204R/SS-W = UCPSS-C204L-M20-N, 161
53205
= UCP-205L-M25, 160
53205/SS
= UCPSS-205L-M25, 160
53205/SS-W = UCPSS-205L-M25-N, 160
53205A/SS-U = UCPASS-205-M25, 162
53205A/SS-U-W = UCPASS-205-M25-N, 162
53205AR/SS-U = UCPASS-C205-M25, 163
53205AR/SS-U-W = UCPASS-C205-M25-N, 163
53205AR-U = UCPA-C205-M25, 163
53205A-U
= UCPA-205-M25, 162
53205R
= UCP-C205L-M25, 161
53205R/SS = UCPSS-C205L-M25, 161
53205R/SS-W = UCPSS-C205L-M25-N, 161
53206
= UCP-206L-M30, 160
53206/SS
= UCPSS-206L-M30, 160
53206/SS-W = UCPSS-206L-M30-N, 160
53206A/SS-U = UCPASS-206-M30, 162
53206A/SS-U-W = UCPASS-206-M30-N, 162
53206AR/SS-U = UCPASS-C206-M30, 163
53206AR/SS-U-W = UCPASS-C206-M30-N, 163
53206AR-U = UCPA-C206-M30, 163
53206A-U
= UCPA-206-M30, 162
53206R
= UCP-C206L-M30, 161
53206R/SS = UCPSS-C206L-M30, 161
53206R/SS-W = UCPSS-C206L-M30-N, 161
53207
= UCP-207L-M35, 160
53207/SS
= UCPSS-207L-M35, 160
53207/SS-W = UCPSS-207L-M35-N, 160
53207R
= UCP-C207L-M35, 161
53207R/SS = UCPSS-C207L-M35, 161
53207R/SS-W = UCPSS-C207L-M35-N, 161
53208
= UCP-208L-M40, 160
53208/SS
= UCPSS-208L-M40, 160
53208/SS-W = UCPSS-208L-M40-N, 160
53208R
= UCP-C208L-M40, 161
53208R/SS = UCPSS-C208L-M40, 161
53208R/SS-W = UCPSS-C208L-M40-N, 161
54204N
= UCFH-204L-M20, 156
54204N/SS = UCFHSS-204L-M20, 156
54204N/SS-W = UCFHSS-204-M20-N, 156
54204NR
= UCFH-C204L-M20, 157
54204NR/SS = UCFHSS-C204L-M20, 157
54204NR/SS-W= UCFHSS-C204-M20-N, 157
54205N
= UCFH-205L-M25, 156
54205N/SS = UCFHSS-205L-M25, 156
54205N/SS-W = UCFHSS-205-M25-N, 156
54205NR
= UCFH-C205L-M25, 157
54205NR/SS = UCFHSS-C205L-M25, 157
54205NR/SS-W = UCFHSS-C205-M25-N, 157
54206N
= UCFH-206L-M30, 156
54206N/SS = UCFHSS-206L-M30, 156
54206N/SS-W = UCFHSS-206-M30-N, 156
54206NR
= UCFH-C206L-M30, 157
54206NR/SS = UCFHSS-C206L-M30, 157
54206NR/SS-W= UCFHSS-C206-M30-N, 157
54207N
= UCFH-207L-M35, 156
54207N/SS = UCFHSS-207L-M35, 156
54207N/SS-W = UCFHSS-207-M35-N, 156
54207NR
= UCFH-C207L-M35, 157
54207NR/SS = UCFHSS-C207L-M35, 157
54207NR/SS-W = UCFHSS-C207-M35-N, 157
54208N
= UCFH-208L-M40, 156
54208N/SS = UCFHSS-208L-M40, 156
54208N/SS-W = UCFHSS-208-M40-N, 156
54208NR
= UCFH-C208L-M40, 157
54208NR/SS = UCFHSS-C208L-M40, 157
54208NR/SS-W= UCFHSS-C208-M40-N, 157
55204SR
= UCF-T204-M20, 164
55204SR/SS = UCFSS-T204-M20, 164
55204VR
= UCFQ-T204L-M20, 155
55204VR/SS = UCFQSS-T204L-M20, 155
55204VR/SS-W = UCFQSS-T204-M20-N, 155
55204W
= UCFL-T204-M20, 165
55204W/SS = UCFLSS-T204-M20, 165
55205AR
= UCF-T205-M25, 164
55205AR/SS = UCFSS-T205-M25, 164
55205AW
= UCFL-T205-M25, 165
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
402
70204VR
= UCFQ-C204L-12, 141
70204VR/SS = UCFQSS-C204L-12, 141
70204VR/SS-W = UCFQSS-C204-12-N, 141
70204W
= UCFL-C204-12, 152
70204W/SS = UCFLSS-C204-12, 152
70205A
= UCF-205-16, 151
70205A/SS = UCFSS-205-16, 151
70205AR
= UCF-C205-16, 151
70205AR/SS = UCFSS-C205-16, 151
70205LA
= UCFL-205-16, 152
70205LA/SS = UCFLSS-205-16, 152
70205V
= UCFQ-205L-16, 140
70205V/SS = UCFQSS-205L-16, 140
70205V/SS-W = UCFQSS-205-16-N, 140
70205VR
= UCFQ-C205L-16, 141
70205VR/SS = UCFQSS-C205L-16, 141
70205VR/SS-W = UCFQSS-C205-16-N, 141
70205WA
= UCFL-C205-16, 152
70205WA/SS = UCFLSS-C205-16, 152
70206A
= UCF-206-20, 151
70206A/SS = UCFSS-206-20, 151
70206KA
= UCFL-206-20, 152
70206KA/SS = UCFLSS-206-20, 152
70206RA
= UCF-C206-20, 151
70206RA/SS = UCFSS-C206-20, 151
70206VA
= UCFQ-206L-20, 140
70206VA/SS = UCFQSS-206L-20, 140
70206VA/SS-W= UCFQSS-206-20-N, 140
70206VRA = UCFQ-C206L-20, 141
70206VRA/SS = UCFQSS-C206L-20, 141
70206VRA/SS-W= UCFQSS-C206-20-N, 141
70206XA
= UCFL-C206-20, 152
70206XA/SS = UCFLSS-C206-20, 152
70207D
= UCFL-207-23, 152
70207D/SS = UCFLSS-207-23, 152
70207G
= UCF-207-23, 151
70207G/SS = UCFSS-207-23, 151
70207M
= UCFL-C207-23, 152
70207M/SS = UCFLSS-C207-23, 152
70207N
= UCF-C207-23, 151
70207N/SS = UCFSS-C207-23, 151
70207V
= UCFQ-207L-23, 140
70207V/SS = UCFQSS-207L-23, 140
70207V/SS-W = UCFQSS-207-23-N, 140
70207VR
= UCFQ-C207L-23, 141
70207VR/SS = UCFQSS-C207L-23, 141
70207VR/SS-W = UCFQSS-C207-23-N, 141
70208F
= UCF-208-24, 151
70208F/SS = UCFSS-208-24, 151
70208FR
= UCF-C208-24, 151
70208FR/SS = UCFSS-C208-24, 151
70208V
= UCFQ-208L-24, 140
70208V/SS = UCFQSS-208L-24, 140
70208V/SS-W = UCFQSS-208-24-N, 140
70208VR
= UCFQ-C208L-24, 141
70208VR/SS = UCFQSS-C208L-24, 141
70208VR/SS-W = UCFQSS-C208-24-N, 141
720206F
= UCFA-206L-20, 144
720206F/SS = UCFASS-206L-20, 144
720206F/SS-W= UCFASS-206L-20-N, 144
720206FR = UCFA-C206L-20, 145
720206FR/SS = UCFASS-C206L-20, 145
720206FR/SS-W = UCFASS-C206L-20-N, 145
72205F
= UCFA-205L-16, 144
72205FA
= UCFA-205L-12, 144
72205FB/SS = UCFASS-205L-16, 144
72205FB/SS-W = UCFASS-205L-16-N, 144
72205FBA/SS = UCFASS-205L-12, 144
72205FBA/SS-W= UCFASS-205L-12-N, 144
72205FR
= UCFA-C205L-16, 145
72205FR/SS = UCFASS-C205L-16, 145
72205FR/SS-W = UCFASS-C205L-16-N, 145
72205FRA = UCFA-C205L-12, 145
72205FRA/SS = UCFASS-C205L-12, 145
72205FRA/SS-W = UCFASS-C205L-12-N, 145
72205G
= UCFG-205L-16, 150
72205G/SS = UCFGSS-205L-16, 150
72205GR
= UCFG-C205L-16, 150
72205GR/SS = UCFGSS-C205L-16, 150
72206FA
= UCFA-206L-16, 144
72206FA/SS = UCFASS-206L-16, 144
72206FA/SS-W = UCFASS-206L-16-N, 144
72206FRA = UCFA-C206L-16, 145
72206FRA/SS = UCFASS-C206L-16, 145
72206FRA/SS-W = UCFASS-C206L-16-N, 145
72206GA
= UCFG-206L-20, 150
72206GA/SS = UCFGSS-206L-20, 150
Index
Part Number Index (Cont.)
75205AR
= UCF-T205-16, 151
75205AR/SS = UCFSS-T205-16, 151
75205VR
= UCFQ-T205L-16, 141
75205VR/SS = UCFQSS-T205L-16, 141
75205VR/SS-W = UCFQSS-T205-16-N, 141
75205WA
= UCFL-T205-16, 152
75205WA/SS = UCFLSS-T205-16, 152
75206RA
= UCF-T206-20, 151
75206RA/SS = UCFSS-T206-20, 151
75206VRA
= UCFQ-T206L-20, 141
75206VRA/SS = UCFQSS-T206L-20, 141
75206VRA/SS-W = UCFQSS-T206-20-N, 141
75206XA
= UCFL-T206-20, 152
75206XA/SS = UCFLSS-T206-20, 152
75207M
= UCFL-T207-23, 152
75207M/SS = UCFLSS-T207-23, 152
75207N
= UCF-T207-23, 151
75207N/SS
= UCFSS-T207-23, 151
75207VR
= UCFQ-T207L-23, 141
75207VR/SS = UCFQSS-T207L-23, 141
75207VR/SS-W = UCFQSS-T207-23-N, 141
75208FR
= UCF-T208-24, 151
75208FR/SS = UCFSS-T208-24, 151
75208VR
= UCFQ-T208L-24, 141
75208VR/SS = UCFQSS-T208L-24, 141
75208VR/SS-W = UCFQSS-T208-24-N, 141
770206FR
= UCFA-T206L-20, 145
770206FR/SS = UCFASS-T206L-20, 145
770206FR/SS-W = UCFASS-T206L-20-N, 145
77205FR
= UCFA-T205L-16, 145
77205FR/SS = UCFASS-T205L-16, 145
77205FR/SS-W = UCFASS-T205L-16-N, 145
77205FRA
= UCFA-T205L-12, 145
77205FRA/SS = UCFASS-T205L-12, 145
77205FRA/SS-W = UCFASS-T205L-12-N, 145
77205GR
= UCFG-T205L-16, 150
77205GR/SS = UCFGSS-T205L-16, 150
77206FRA
= UCFA-T206L-16, 145
77206FRA/SS = UCFASS-T206L-16, 145
77206FRA/SS-W = UCFASS-T206L-16-N, 145
77206GRA
= UCFG-T205L-20, 150
77206GRA/SS = UCFGSS-T205L-20, 150
78204BR/SS-U = UCPASS-T204-12, 149
78204BR/SS-U-W = UCPASS-T204-12-N, 149
78204BR-U = UCPA-T204-12, 149
78204R
= UCP-T204L-12, 147
78204R/SS
= UCPSS-T204L-12, 147
78204R/SS-W = UCPSS-T204L-12-N, 147
78205BR/SS-U = UCPASS-T205-16, 149
78205BR/SS-U-W = UCPASS-T205-16-N, 149
78205BR-U = UCPA-T205-16, 149
78205R
= UCP-T205L-16, 147
78205R/SS
= UCPSS-T205L-16, 147
78205R/SS-W = UCPSS-T205L-16-N, 147
78206BAR/SS-U = UCPASS-T206-20, 149
78206BAR/SS-U-W = UCPASS-T206-20-N, 149
78206BAR-U = UCPA-T206-20, 149
78206RA
= UCP-T206L-20, 147
78206RA/SS = UCPSS-T206L-20, 147
78206RA/SS-W = UCPSS-T206L-20-N, 147
78207R
= UCP-T207L-23, 147
78207R/SS
= UCPSS-T207L-23, 147
78207R/SS-W = UCPSS-T207L-23-N, 147
78208R
= UCP-T208L-24, 147
78208R/SS
= UCPSS-T208L-24, 147
78208R/SS-W = UCPSS-T208L-24-N, 147
79204NR
= UCFH-T204L-12, 143
79204NR/SS = UCFHSS-T204L-12, 143
79204NR/SS-W = UCFHSS-T204-12-N, 143
79205NR
= UCFH-T205L-16, 143
79205NR/SS = UCFHSS-T205L-16, 143
79205NR/SS-W = UCFHSS-T205-16-N, 143
79206NRA
= UCFH-T206L-20, 143
79206NRA/SS = UCFHSS-T206L-20, 143
79206NRA/SS-W = UCFHSS-T206-20-N, 143
79207NR
= UCFH-T207L-23, 143
79207NR/SS = UCFHSS-T207L-23, 143
79207NR/SS-W = UCFHSS-T207-23-N, 143
79208NR
= UCFH-T208L-24, 143
79208NR/SS = UCFHSS-T208L-24, 143
79208NR/SS-W= UCFHSS-T208-24-N, 143
815-19MP-.71, 86
815-19MP-1, 86
815-19MP-1.25, 86
815-19MP-1.44, 86
815-19MP-1.5, 86
815-19MP-IDL-1, 86
815-19MP-IDL-1.25, 86
815-19MP-IDL-1.44, 86
815-19MP-IDL-1.5, 86
815-21-IDL-1, 89
815-21-IDL-1.25, 89
815-21-IDL-1.44, 89
815-21-IDL-1.5, 89
815-21LF-IDL-1, 88
815-21LF-IDL-1.25, 88
815-21LF-IDL-1.44, 88
815-21LF-IDL-1.5, 88
815-21MP-.71, 86
815-21MP-1, 86
815-21MP-1.25, 86
815-21MP-1.44, 86
815-21MP-1.5, 86
815-21MP-IDL-1, 86
815-21MP-IDL-1.25, 86
815-21MP-IDL-1.44, 86
815-21MP-IDL-1.5, 86
815-21P-1, 87
815-21P-1.25, 87
815-21P-1.44, 87
815-21P-1.5, 87
815-21P-IDL-1, 87
815-21P-IDL-1.25, 87
815-21P-IDL-1.44, 87
815-21P-IDL-1.5, 87
815-23LF-IDL-1, 88
815-23LF-IDL-1.25, 88
815-23LF-IDL-1.44, 88
815-23LF-IDL-1.5, 88
815-23MP-.71, 86
815-23MP-1, 86
815-23MP-1.25, 86
815-23MP-1.44, 86
815-23MP-1.5, 86
815-23MP-IDL-1, 86
815-23MP-IDL-1.25, 86
815-23MP-IDL-1.44, 86
815-23MP-IDL-1.5, 86
815-23P-1, 87
815-23P-1.25, 87
815-23P-1.44, 87
815-23P-1.5, 87
815-23P-IDL-1, 87
815-23P-IDL-1.25, 87
815-23P-IDL-1.44, 87
815-23P-IDL-1.5, 87
815-25-IDL-1, 89
815-25-IDL-1.25, 89
815-25-IDL-1.44, 89
815-25-IDL-1.5, 89
815-25LF-IDL-1, 88
815-25LF-IDL-1.25, 88
815-25LF-IDL-1.44, 88
815-25LF-IDL-1.5, 88
815-25MP-.71, 86
815-25MP-1, 86
815-25MP-1.25, 86
815-25MP-1.44, 86
815-25MP-1.5, 86
815-25MP-IDL-1, 86
815-25MP-IDL-1.25, 86
815-25MP-IDL-1.44, 86
815-25MP-IDL-1.5, 86
815-25P-1, 87
815-25P-1.25, 87
815-25P-1.44, 87
815-25P-1.5, 87
815-25P-IDL-1, 87
815-25P-IDL-1.25, 87
815-25P-IDL-1.44, 87
815-25P-IDL-1.5, 87
815-27MP-.71, 86
815-27MP-1, 86
815-27MP-1.25, 86
815-27MP-1.44, 86
815-27MP-1.5, 86
815-27MP-IDL-1, 86
815-27MP-IDL-1.25, 86
815-27MP-IDL-1.44, 86
815-27MP-IDL-1.5, 86
820-19MP-.71, 92
820-19MP-1, 92
820-19MP-1.25, 92
820-19MP-1.44, 92
820-19MP-1.5, 92
820-19MP-IDL-1, 92
820-19MP-IDL-1.25, 92
820-19MP-IDL-1.44, 92
820-19MP-IDL-1.5, 92
820-21MP-.71, 92
820-21MP-1, 92
820-21MP-1.25, 92
820-21MP-1.44, 92
820-21MP-1.5, 92
820-21MP-IDL-1, 92
820-21MP-IDL-1.25, 92
820-21MP-IDL-1.44, 92
820-21MP-IDL-1.5, 92
820-21P-1, 93
820-21P-1.25, 93
820-21P-1.44, 93
820-21P-1.5, 93
820-21P-IDL-1, 93
820-21P-IDL-1.25, 93
820-21P-IDL-1.44, 93
820-21P-IDL-1.5, 93
820-23MP-.71, 92
820-23MP-1, 92
820-23MP-1.25, 92
820-23MP-1.44, 92
820-23MP-1.5, 92
820-23MP-IDL-1, 92
820-23MP-IDL-1.25, 92
820-23MP-IDL-1.44, 92
820-23MP-IDL-1.5, 92
820-23P-1, 93
820-23P-1.25, 93
820-23P-1.44, 93
820-23P-1.5, 93
820-23P-IDL-1, 93
820-23P-IDL-1.25, 93
820-23P-IDL-1.44, 93
820-23P-IDL-1.5, 93
820-25MP-.71, 92
820-25MP-1, 92
820-25MP-1.25, 92
820-25MP-1.44, 92
820-25MP-1.5, 92
820-25MP-IDL-1, 92
820-25MP-IDL-1.25, 92
820-25MP-IDL-1.44, 92
820-25MP-IDL-1.5, 92
820-25P-1, 93
820-25P-1.25, 93
820-25P-1.44, 93
820-25P-1.5, 93
820-25P-IDL-1, 93
820-25P-IDL-1.25, 93
820-25P-IDL-1.44, 93
820-25P-IDL-1.5, 93
820-27MP-.71, 92
820-27MP-1, 92
820-27MP-1.25, 92
820-27MP-1.44, 92
820-27MP-1.5, 92
820-27MP-IDL-1, 92
820-27MP-IDL-1.25, 92
820-27MP-IDL-1.44, 92
820-27MP-IDL-1.5, 92
821-21MP-.1.5, 94
821-21MP-.71, 94
821-21MP-1, 94
821-21MP-1.25, 94
821-21MP-1.44, 94
821-21MP-IDL-1, 94
821-21MP-IDL-1.25, 94
821-21MP-IDL-1.44, 94
821-21MP-IDL-1.5, 94
821-23MP-.1.5, 94
821-23MP-.71, 94
821-23MP-1, 94
821-23MP-1.25, 94
821-23MP-1.44, 94
821-23MP-IDL-1, 94
821-23MP-IDL-1.25, 94
821-23MP-IDL-1.44, 94
821-23MP-IDL-1.5, 94
821-25MP-.1.5, 94
821-25MP-.71, 94
821-25MP-1, 94
821-25MP-1.25, 94
403
821-25MP-1.44, 94
821-25MP-IDL-1, 94
821-25MP-IDL-1.25, 94
821-25MP-IDL-1.44, 94
821-25MP-IDL-1.5, 94
821-27MP-.1.5, 94
821-27MP-.71, 94
821-27MP-1, 94
821-27MP-1.25, 94
821-27MP-1.44, 94
821-27MP-IDL-1, 94
821-27MP-IDL-1.25, 94
821-27MP-IDL-1.44, 94
821-27MP-IDL-1.5, 94
880-10MP-.71, 95
880-10MP-1, 95
880-10MP-1.25, 95
880-10MP-1.44, 95
880-10MP-1.5, 95
880-10MP-IDL-1, 95
880-10MP-IDL-1.25, 95
880-10MP-IDL-1.44, 95
880-10MP-IDL-1.5, 95
880-10P-1, 96
880-10P-1.25, 96
880-10P-1.44, 96
880-10P-1.5, 96
880-10P-IDL-1, 96
880-10P-IDL-1.25, 96
880-10P-IDL-1.44, 96
880-10P-IDL-1.5, 96
880-11MP-.71, 95
880-11MP-1, 95
880-11MP-1.25, 95
880-11MP-1.44, 95
880-11MP-1.5, 95
880-11MP-IDL-1, 95
880-11MP-IDL-1.25, 95
880-11MP-IDL-1.44, 95
880-11MP-IDL-1.5, 95
880-12MP-.71, 95
880-12MP-1, 95
880-12MP-1.25, 95
880-12MP-1.44, 95
880-12MP-1.5, 95
880-12MP-IDL-1, 95
880-12MP-IDL-1.25, 95
880-12MP-IDL-1.44, 95
880-12MP-IDL-1.5, 95
880-12P-1, 96
880-12P-1.25, 96
880-12P-1.44, 96
880-12P-1.5, 96
880-12P-IDL-1, 96
880-12P-IDL-1.25, 96
880-12P-IDL-1.44, 96
880-12P-IDL-1.5, 96
880-9MP-.71, 95
880-9MP-1, 95
880-9MP-1.25, 95
880-9MP-1.44, 95
880-9MP-1.5, 95
880-9MP-IDL-1, 95
880-9MP-IDL-1.25, 95
880-9MP-IDL-1.44, 95
880-9MP-IDL-1.5, 95
881-19MP-.1.25, 90
881-19MP-.71, 90
881-19MP-1, 90
881-19MP-1.44, 90
881-19MP-1.5, 90
881-19MP-IDL-1, 90
881-19MP-IDL-1.25, 90
881-19MP-IDL-1.44, 90
881-19MP-IDL-1.5, 90
881-21MP-.1.25, 90
881-21MP-.71, 90
881-21MP-1, 90
881-21MP-1.44, 90
881-21MP-1.5, 90
881-21MP-IDL-1, 90
881-21MP-IDL-1.25, 90
881-21MP-IDL-1.44, 90
881-21MP-IDL-1.5, 90
881-21P-1, 91
881-21P-1.25, 91
881-21P-1.44, 91
881-21P-1.5, 91
881-21P-IDL-1, 91
881-21P-IDL-1.25, 91
881-21P-IDL-1.44, 91
881-21P-IDL-1.5, 91
881-23MP-.1.25, 90
881-23MP-.71, 90
881-23MP-1, 90
881-23MP-1.44, 90
881-23MP-1.5, 90
881-23MP-IDL-1, 90
881-23MP-IDL-1.25, 90
881-23MP-IDL-1.44, 90
881-23MP-IDL-1.5, 90
881-23P-1, 91
881-23P-1.25, 91
881-23P-1.44, 91
881-23P-1.5, 91
881-23P-IDL-1, 91
881-23P-IDL-1.25, 91
881-23P-IDL-1.44, 91
881-23P-IDL-1.5, 91
881-25MP-.1.25, 90
881-25MP-.71, 90
881-25MP-1, 90
881-25MP-1.44, 90
881-25MP-1.5, 90
881-25MP-IDL-1, 90
881-25MP-IDL-1.25, 90
881-25MP-IDL-1.44, 90
881-25MP-IDL-1.5, 90
881-25P-1, 91
881-25P-1.25, 91
881-25P-1.44, 91
881-25P-1.5, 91
881-25P-IDL-1, 91
881-25P-IDL-1.25, 91
881-25P-IDL-1.44, 91
881-25P-IDL-1.5, 91
881-27MP-.1.25, 90
881-27MP-.71, 90
881-27MP-1, 90
881-27MP-1.44, 90
881-27MP-1.5, 90
881-27MP-IDL-1, 90
881-27MP-IDL-1.25, 90
881-27MP-IDL-1.44, 90
881-27MP-IDL-1.5, 90
882-10MP-.71, 97
882-10MP-1, 97
882-10MP-1.25, 97
882-10MP-1.44, 97
882-10MP-1.5, 97
882-10MP-IDL-1, 97
882-10MP-IDL-1.25, 97
882-10MP-IDL-1.44, 97
882-10MP-IDL-1.5, 97
882-10P-1, 98
882-10P-1.25, 98
882-10P-1.44, 98
882-10P-1.5, 98
882-10P-IDL-1, 98
882-10P-IDL-1.25, 98
882-10P-IDL-1.44, 98
882-10P-IDL-1.5, 98
882-11MP-.71, 97
882-11MP-1, 97
882-11MP-1.25, 97
882-11MP-1.44, 97
882-11MP-1.5, 97
882-11MP-IDL-1, 97
882-11MP-IDL-1.25, 97
882-11MP-IDL-1.44, 97
882-11MP-IDL-1.5, 97
882-12MP-.71, 97
882-12MP-1, 97
882-12MP-1.25, 97
882-12MP-1.44, 97
882-12MP-1.5, 97
882-12MP-IDL-1, 97
882-12MP-IDL-1.25, 97
882-12MP-IDL-1.44, 97
882-12MP-IDL-1.5, 97
882-12P-1, 98
882-12P-1.25, 98
882-12P-1.44, 98
882-12P-1.5, 98
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
Index
Part Number Index (Cont.)
882-12P-IDL-1, 98
882-12P-IDL-1.25, 98
882-12P-IDL-1.44, 98
882-12P-IDL-1.5, 98
882-9MP-.71, 97
882-9MP-1, 97
882-9MP-1.25, 97
882-9MP-1.44, 97
882-9MP-1.5, 97
882-9MP-IDL-1, 97
882-9MP-IDL-1.25, 97
882-9MP-IDL-1.44, 97
882-9MP-IDL-1.5, 97
APS, 324
BBH-, 172
BBS-, 172
BCH-, 172
BCS-, 172, 176
BDH-, 173
BDS-, 173
BEH-, 172
BES-, 172
BFH-, 172
BFS-, 172
BKH-, 172
BKS-, 172, 176
BPS12-, 325
CRP-, 338, 342
DPL7-, 325
FAH-, 172
FAS-, 172
FBH-, 172
FBS-, 172, 176
FDH-, 171
FDS-, 171
FEH-, 171
FES-, 171
FF-166, 342
FFH-, 171
FFS-, 171, 176
FMH-, 173
FMS-, 173
FSP-, 176
HA-, 135
HAA-, 263
HAB-, 263
HAC-, 263
HB-, 135
HC-, 135
HD-, 135
HDX-, 173
HE-, 135
HF-, 135
HG, 135-137
HP-, 339
HPR-220, 343
HR-, 339
HS-, 128
HT-, 338
HXA-, 342
ICD7-, 325
ICG7-, 325
KS-, 129
LG, 166-170, 175-176
NA-, 135
NB, 135, 340, 343
NC-, 135
ND-, 135
NE-, 135
NF-, 135
NG-, 135
NRB-, 344
NT, 340
R15, 109-110, 320-321
R3, 109-110, 320-321
RF..., 109-111, 320-322
RH-, 382-385
RP, 111, 322
SA, 135, 263
SB, 135, 341, 343
SC, 135, 262
SD-, 135
SDX-, 173
SE-, 135
SF-, 135
SG-, 135
SPB-, 343
ST, 341
STF-1006, 136
UCF-204-12, 151
UCF-204-M20, 164
UCF-205-16, 151
UCF-205-M25, 164
UCF-206-20, 151
UCF-206-M30, 164
UCF-207-23, 151
UCF-207-M35, 164
UCF-208-24, 151
UCF-208-M40, 164
UCFA-205L-12, 144
UCFA-205L-16, 144
UCFA-205L-M20, 158
UCFA-205L-M25, 158
UCFA-206L-16, 144
UCFA-206L-20, 144
UCFA-206L-M25, 158
UCFA-206L-M30, 158
UCFA-C205L-12, 145
UCFA-C205L-16, 145
UCFA-C205L-M20, 159
UCFA-C205L-M25, 159
UCFA-C206L-16, 145
UCFA-C206L-20, 145
UCFA-C206L-M25, 159
UCFA-C206L-M30, 159
UCFASS-205L-12, 144
UCFASS-205L-12-N, 144
UCFASS-205L-16, 144
UCFASS-205L-16-N, 144
UCFASS-205L-M20, 158
UCFASS-205L-M20-N, 158
UCFASS-205L-M25, 158
UCFASS-205L-M25-N, 158
UCFASS-206L-16, 144
UCFASS-206L-16-N, 144
UCFASS-206L-20, 144
UCFASS-206L-20-N, 144
UCFASS-206L-M25, 158
UCFASS-206L-M25-N, 158
UCFASS-206L-M30, 158
UCFASS-206L-M30-N, 158
UCFASS-C205L-12, 145
UCFASS-C205L-12-N, 145
UCFASS-C205L-16, 145
UCFASS-C205L-16-N, 145
UCFASS-C205L-M20, 159
UCFASS-C205L-M20-N, 159
UCFASS-C205L-M25, 159
UCFASS-C205L-M25-N, 159
UCFASS-C206L-16, 145
UCFASS-C206L-16-N, 145
UCFASS-C206L-20, 145
UCFASS-C206L-20-N, 145
UCFASS-C206L-M25, 159
UCFASS-C206L-M25-N, 159
UCFASS-C206L-M30, 159
UCFASS-C206L-M30-N, 159
UCFASS-T205L-12, 145
UCFASS-T205L-12-N, 145
UCFASS-T205L-16, 145
UCFASS-T205L-16-N, 145
UCFASS-T205L-M20, 159
UCFASS-T205L-M20-N, 159
UCFASS-T205L-M25, 159
UCFASS-T205L-M25-N, 159
UCFASS-T206L-16, 145
UCFASS-T206L-16-N, 145
UCFASS-T206L-20, 145
UCFASS-T206L-20-N, 145
UCFASS-T206L-M25, 159
UCFASS-T206L-M25-N, 159
UCFASS-T206L-M30, 159
UCFASS-T206L-M30-N, 159
UCFA-T205L-12, 145
UCFA-T205L-16, 145
UCFA-T205L-M20, 159
UCFA-T205L-M25, 159
UCFA-T206L-16, 145
UCFA-T206L-20, 145
UCFA-T206L-M25, 159
UCFA-T206L-M30, 159
UCF-C204-12, 151
UCF-C204-M20, 164
UCF-C205-16, 151
UCF-C205-M25, 164
UCF-C206-20, 151
UCF-C206-M30, 164
UCF-C207-23, 151
UCF-C207-M35, 164
UCF-C208-24, 151
UCF-C208-M40, 164
UCFG-205L-16, 150
UCFG-205L-M25, 153
UCFG-206L-20, 150
UCFG-206L-M30, 153
UCFG-C205L-16, 150
UCFG-C205L-M25, 153
UCFG-C206L-20, 150
UCFG-C206L-M30, 153
UCFGSS-205L-16, 150
UCFGSS-205L-M25, 153
UCFGSS-206L-20, 150
UCFGSS-206L-M30, 153
UCFGSS-C205L-16, 150
UCFGSS-C205L-M25, 153
UCFGSS-C206L-20, 150
UCFGSS-C206L-M30, 153
UCFGSS-T205L-16, 150
UCFGSS-T205L-20, 150
UCFGSS-T205L-M25, 153
UCFGSS-T205L-M30, 153
UCFG-T205L-16, 150
UCFG-T205L-20, 150
UCFG-T205L-M25, 153
UCFG-T205L-M30, 153
UCFH-204L-12, 142
UCFH-204L-M20, 156
UCFH-205L-16, 142
UCFH-205L-M25, 156
UCFH-206L-20, 142
UCFH-206L-M30, 156
UCFH-207L-23, 142
UCFH-207L-M35, 156
UCFH-208L-24, 142
UCFH-208L-M40, 156
UCFH-C204L-12, 143
UCFH-C204L-M20, 157
UCFH-C205L-16, 143
UCFH-C205L-M25, 157
UCFH-C206L-20, 143
UCFH-C206L-M30, 157
UCFH-C207L-23, 143
UCFH-C207L-M35, 157
UCFH-C208L-24, 143
UCFH-C208L-M40, 157
UCFHSS-204-12-N, 142
UCFHSS-204L-12, 142
UCFHSS-204L-M20, 156
UCFHSS-204-M20-N, 156
UCFHSS-205-16-N, 142
UCFHSS-205L-16, 142
UCFHSS-205L-M25, 156
UCFHSS-205-M25-N, 156
UCFHSS-206-20-N, 142
UCFHSS-206L-20, 142
UCFHSS-206L-M30, 156
UCFHSS-206-M30-N, 156
UCFHSS-207-23-N, 142
UCFHSS-207L-23, 142
UCFHSS-207L-M35, 156
UCFHSS-207-M35-N, 156
UCFHSS-208-24-N, 142
UCFHSS-208L-24, 142
UCFHSS-208L-M40, 156
UCFHSS-208-M40-N, 156
UCFHSS-C204-12-N, 143
UCFHSS-C204L-12, 143
UCFHSS-C204L-M20, 157
UCFHSS-C204-M20-N, 157
UCFHSS-C205-16-N, 143
UCFHSS-C205L-16, 143
UCFHSS-C205L-M25, 157
UCFHSS-C205-M25-N, 157
UCFHSS-C206-20-N, 143
UCFHSS-C206L-20, 143
UCFHSS-C206L-M30, 157
UCFHSS-C206-M30-N, 157
UCFHSS-C207-23-N, 143
UCFHSS-C207L-23, 143
UCFHSS-C207L-M35, 157
UCFHSS-C207-M35-N, 157
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
UCFHSS-C208-24-N, 143
UCFHSS-C208L-24, 143
UCFHSS-C208L-M40, 157
UCFHSS-C208-M40-N, 157
UCFHSS-T204-12-N, 143
UCFHSS-T204L-12, 143
UCFHSS-T204L-M20, 157
UCFHSS-T204-M20-N, 157
UCFHSS-T205-16-N, 143
UCFHSS-T205L-16, 143
UCFHSS-T205L-M25, 157
UCFHSS-T205-M25-N, 157
UCFHSS-T206-20-N, 143
UCFHSS-T206L-20, 143
UCFHSS-T206L-M30, 157
UCFHSS-T206-M30-N, 157
UCFHSS-T207-23-N, 143
UCFHSS-T207L-23, 143
UCFHSS-T207L-M35, 157
UCFHSS-T207-M35-N, 157
UCFHSS-T208-24-N, 143
UCFHSS-T208L-24, 143
UCFHSS-T208L-M40, 157
UCFHSS-T208-M40-N, 157
UCFH-T204L-12, 143
UCFH-T204L-M20, 157
UCFH-T205L-16, 143
UCFH-T205L-M25, 157
UCFH-T206L-20, 143
UCFH-T206L-M30, 157
UCFH-T207L-23, 143
UCFH-T207L-M35, 157
UCFH-T208L-24, 143
UCFH-T208L-M40, 157
UCFL-204-12, 152
UCFL-204-M20, 165
UCFL-205-16, 152
UCFL-205-M25, 165
UCFL-206-20, 152
UCFL-206-M30, 165
UCFL-207-23, 152
UCFL-207-M35, 165
UCFL-C204-12, 152
UCFL-C204-M20, 165
UCFL-C205-16, 152
UCFL-C205-M25, 165
UCFL-C206-20, 152
UCFL-C206-M30, 165
UCFL-C207-23, 152
UCFL-C207-M35, 165
UCFLSS-204-12, 152
UCFLSS-204-M20, 165
UCFLSS-205-16, 152
UCFLSS-205-M25, 165
UCFLSS-206-20, 152
UCFLSS-206-M30, 165
UCFLSS-207-23, 152
UCFLSS-207-M35, 165
UCFLSS-C204-12, 152
UCFLSS-C204-M20, 165
UCFLSS-C205-16, 152
UCFLSS-C205-M25, 165
UCFLSS-C206-20, 152
UCFLSS-C206-M30, 165
UCFLSS-C207-23, 152
UCFLSS-C207-M35, 165
UCFLSS-T204-12, 152
UCFLSS-T204-M20, 165
UCFLSS-T205-16, 152
UCFLSS-T205-M25, 165
UCFLSS-T206-20, 152
UCFLSS-T206-M30, 165
UCFLSS-T207-23, 152
UCFLSS-T207-M35, 165
UCFL-T204-M20, 165
UCFL-T205-M25, 165
UCFL-T206-M30, 165
UCFL-T207-M35, 165
UCFQ-204L-12, 140
UCFQ-204L-M20, 154
UCFQ-205L-16, 140
UCFQ-205L-M25, 154
UCFQ-206L-20, 140
UCFQ-206L-M30, 154
UCFQ-207L-23, 140
UCFQ-207L-M35, 154
UCFQ-208L-24, 140
404
UCFQ-208L-M40, 154
UCFQ-C204L-12, 141
UCFQ-C204L-M20, 155
UCFQ-C205L-16, 141
UCFQ-C205L-M25, 155
UCFQ-C206L-20, 141
UCFQ-C206L-M30, 155
UCFQ-C207L-23, 141
UCFQ-C207L-M35, 155
UCFQ-C208L-24, 141
UCFQ-C208L-M40, 155
UCFQSS-204-12-N, 140
UCFQSS-204L-12, 140
UCFQSS-204L-M20, 154
UCFQSS-204-M20-N, 154
UCFQSS-205-16-N, 140
UCFQSS-205L-16, 140
UCFQSS-205L-M25, 154
UCFQSS-205-M25-N, 154
UCFQSS-206-20-N, 140
UCFQSS-206L-20, 140
UCFQSS-206L-M30, 154
UCFQSS-206-M30-N, 154
UCFQSS-207-23-N, 140
UCFQSS-207L-23, 140
UCFQSS-207L-M35, 154
UCFQSS-207-M35-N, 154
UCFQSS-208-24-N, 140
UCFQSS-208L-24, 140
UCFQSS-208L-M40, 154
UCFQSS-208-M40-N, 154
UCFQSS-C204-12-N, 141
UCFQSS-C204L-12, 141
UCFQSS-C204L-M20, 155
UCFQSS-C204-M20-N, 155
UCFQSS-C205-16-N, 141
UCFQSS-C205L-16, 141
UCFQSS-C205L-M25, 155
UCFQSS-C205-M25-N, 155
UCFQSS-C206-20-N, 141
UCFQSS-C206L-20, 141
UCFQSS-C206L-M30, 155
UCFQSS-C206-M30-N, 155
UCFQSS-C207-23-N, 141
UCFQSS-C207L-23, 141
UCFQSS-C207L-M35, 155
UCFQSS-C207-M35-N, 155
UCFQSS-C208-24-N, 141
UCFQSS-C208L-24, 141
UCFQSS-C208L-M40, 155
UCFQSS-C208-M40-N, 155
UCFQSS-T204-12-N, 141
UCFQSS-T204L-12, 141
UCFQSS-T204L-M20, 155
UCFQSS-T204-M20-N, 155
UCFQSS-T205-16-N, 141
UCFQSS-T205L-16, 141
UCFQSS-T205L-M25, 155
UCFQSS-T205-M25-N, 155
UCFQSS-T206-20-N, 141
UCFQSS-T206L-20, 141
UCFQSS-T206L-M30, 155
UCFQSS-T206-M30-N, 155
UCFQSS-T207-23-N, 141
UCFQSS-T207L-23, 141
UCFQSS-T207L-M35, 155
UCFQSS-T207-M35-N, 155
UCFQSS-T208-24-N, 141
UCFQSS-T208L-24, 141
UCFQSS-T208L-M40, 155
UCFQSS-T208-M40-N, 155
UCFQ-T204L-12, 141
UCFQ-T204L-M20, 155
UCFQ-T205L-16, 141
UCFQ-T205L-M25, 155
UCFQ-T206L-20, 141
UCFQ-T206L-M30, 155
UCFQ-T207L-23, 141
UCFQ-T207L-M35, 155
UCFQ-T208L-24, 141
UCFQ-T208L-M40, 155
UCFSS-204-12, 151
UCFSS-204-M20, 164
UCFSS-205-16, 151
UCFSS-205-M25, 164
UCFSS-206-20, 151
UCFSS-206-M30, 164
UCFSS-207-23, 151
UCFSS-207-M35, 164
UCFSS-208-24, 151
UCFSS-208-M40, 164
UCFSS-C204-12, 151
UCFSS-C204-M20, 164
UCFSS-C205-16, 151
UCFSS-C205-M25, 164
UCFSS-C206-20, 151
UCFSS-C206-M30, 164
UCFSS-C207-23, 151
UCFSS-C207-M35, 164
UCFSS-C208-24, 151
UCFSS-C208-M40, 164
UCFSS-T204-12, 151
UCFSS-T204-M20, 164
UCFSS-T205-16, 151
UCFSS-T205-M25, 164
UCFSS-T206-20, 151
UCFSS-T206-M30, 164
UCFSS-T207-23, 151
UCFSS-T207-M35, 164
UCFSS-T208-24, 151
UCFSS-T208-M40, 164
UCF-T204-12, 151
UCF-T204-M20, 164
UCF-T205-16, 151
UCF-T205-M25, 164
UCF-T206-20, 151
UCF-T206-M30, 164
UCF-T207-23, 151
UCF-T207-M35, 164
UCF-T208-24, 151
UCF-T208-M40, 164
UCP-204L-12, 146
UCP-204L-M20, 160
UCP-205L-16, 146
UCP-205L-M25, 160
UCP-206L-20, 146
UCP-206L-M30, 160
UCP-207L-23, 146
UCP-207L-M35, 160
UCP-208L-24, 146
UCP-208L-M40, 160
UCPA-204-12, 148
UCPA-204-M20, 162
UCPA-205-16, 148
UCPA-205-M25, 162
UCPA-206-20, 148
UCPA-206-M30, 162
UCPA-C204-12, 149
UCPA-C204-M20, 163
UCPA-C205-16, 149
UCPA-C205-M25, 163
UCPA-C206-20, 149
UCPA-C206-M30, 163
UCPASS-204-12, 148
UCPASS-204-12-N, 148
UCPASS-204-M20, 162
UCPASS-204-M20-N, 162
UCPASS-205-16, 148
UCPASS-205-16-N, 148
UCPASS-205-M25, 162
UCPASS-205-M25-N, 162
UCPASS-206-20, 148
UCPASS-206-20-N, 148
UCPASS-206-M30, 162
UCPASS-206-M30-N, 162
UCPASS-C204-12, 149
UCPASS-C204-12-N, 149
UCPASS-C204-M20, 163
UCPASS-C204-M20-N, 163
UCPASS-C205-16, 149
UCPASS-C205-16-N, 149
UCPASS-C205-M25, 163
UCPASS-C205-M25-N, 163
UCPASS-C206-20, 149
UCPASS-C206-20-N, 149
UCPASS-C206-M30, 163
UCPASS-C206-M30-N, 163
UCPASS-T204-12, 149
UCPASS-T204-12-N, 149
UCPASS-T204-M20, 163
UCPASS-T204-M20-N, 163
UCPASS-T205-16, 149
UCPASS-T205-16-N, 149
UCPASS-T205-M25, 163
Index
Part Number Index (Cont.)
UCPASS-T205-M25-N, 163
UCPASS-T206-20, 149
UCPASS-T206-20-N, 149
UCPASS-T206-M30, 163
UCPASS-T206-M30-N, 163
UCPA-T204-12, 149
UCPA-T204-M20, 163
UCPA-T205-16, 149
UCPA-T205-M25, 163
UCPA-T206-20, 149
UCPA-T206-M30, 163
UCP-C204L-12, 147
UCP-C204L-M20, 161
UCP-C205L-16, 147
UCP-C205L-M25, 161
UCP-C206L-20, 147
UCP-C206L-M30, 161
UCP-C207L-23, 147
UCP-C207L-M35, 161
UCP-C208L-24, 147
UCP-C208L-M40, 161
UCPSS-204L-12, 146
UCPSS-204L-12-N, 146
UCPSS-204L-M20, 160
UCPSS-204L-M20-N, 160
UCPSS-205L-16, 146
UCPSS-205L-16-N, 146
UCPSS-205L-M25, 160
UCPSS-205L-M25-N, 160
UCPSS-206L-20, 146
UCPSS-206L-20-N, 146
UCPSS-206L-M30, 160
UCPSS-206L-M30-N, 160
UCPSS-207L-23, 146
UCPSS-207L-23-N, 146
UCPSS-207L-M35, 160
UCPSS-207L-M35-N, 160
UCPSS-208L-24, 146
UCPSS-208L-24-N, 146
UCPSS-208L-M40, 160
UCPSS-208L-M40-N, 160
UCPSS-C204L-12, 147
UCPSS-C204L-12-N, 147
UCPSS-C204L-M20, 161
UCPSS-C204L-M20-N, 161
UCPSS-C205L-16, 147
UCPSS-C205L-16-N, 147
UCPSS-C205L-M25, 161
UCPSS-C205L-M25-N, 161
UCPSS-C206L-20, 147
UCPSS-C206L-20-N, 147
UCPSS-C206L-M30, 161
UCPSS-C206L-M30-N, 161
UCPSS-C207L-23, 147
UCPSS-C207L-23-N, 147
UCPSS-C207L-M35, 161
UCPSS-C207L-M35-N, 161
UCPSS-C208L-24, 147
UCPSS-C208L-24-N, 147
UCPSS-C208L-M40, 161
UCPSS-C208L-M40-N, 161
UCPSS-T204L-12, 147
UCPSS-T204L-12-N, 147
UCPSS-T204L-M20, 161
UCPSS-T204L-M20-N, 161
UCPSS-T205L-16, 147
UCPSS-T205L-16-N, 147
UCPSS-T205L-M25, 161
UCPSS-T205L-M25-N, 161
UCPSS-T206L-20, 147
UCPSS-T206L-20-N, 147
UCPSS-T206L-M30, 161
UCPSS-T206L-M30-N, 161
UCPSS-T207L-23, 147
UCPSS-T207L-23-N, 147
UCPSS-T207L-M35, 161
UCPSS-T207L-M35-N, 161
UCPSS-T208L-24, 147
UCPSS-T208L-24-N, 147
UCPSS-T208L-M40, 161
UCPSS-T208L-M40-N, 161
UCP-T204L-12, 147
UCP-T204L-M20, 161
UCP-T205L-16, 147
UCP-T205L-M25, 161
UCP-T206L-20, 147
UCP-T206L-M30, 161
UCP-T207L-23, 147
UCP-T207L-M35, 161
UCP-T208L-24, 147
UCP-T208L-M40, 161
VF-CR, 117-120, 342
VFE, 262
VG-011-, 203-205, 214
VG-012-, 202
VG-013, 201, 210
VG-014H-, 212
VG-015, 213
VG-016-, 213
VG-017, 213
VG-018, 212
VG-019-12, 215
VG-020, 207
VG-021-, 214
VG-022-01, 206
VG-031-, 205
VG-032-12-, 215
VG-040-01, 232
VG-113, 210
VG-117-, 211, 232
VG-118, 211
VG-1234-SERP-, 131
VG-1568-, 112-113, 232
VG-190, 216
VG-191-, 216
VG-200-, 301
VG-201-, 300
VG-202, 270-271, 277
VG-203, 268-269, 277
VG-204, 206, 300-301
VG-205-, 297-298
VG-205-G-14-S, 231
VG-210, 270, 277
VG-211, 293-295
VG-212, 205, 272-273, 279
VG-213, 286-288, 291-292
VG-215-, 312
VG-221, 267, 277
VG-223, 288-292
VG-232, 205, 272
VG-238-, 371
VG-245-, 280-281
VG-252-4-38, 205
VG-253, 284-285
VG-254, 284-285
VG-262-CS-53, 231
VG-280, 283
VG-281-M10F, 283
VG-282, 283
VG-290, 282
VG-291, 282
VG-292, 282
VG-293, 282
VG-2RT-, 101
VG-305, 376
VG-307, 375
VG-308-, 375
VG-311-, 376
VG-340-, 132
VG-360-, 133
VG-370, 132
VG-380-, 133
VG-3RTC-, 101
VG-402-, 379
VG-403-, 380
VG-404-, 380
VG-410-, 379
VG-450, 381
VG-452, 381
VG-4RT-, 101
VG-501, 359, 369
VG-504 , 359, 369
VG-505, 360, 370
VG-506 , 360, 369
VG-511, 361-364, 371
VG-512 , 361-364, 369
VG-513, 365, 371
VG-514, 365, 367-369
VG-516, 366, 369
VG-517-01-, 367
VG-518, 366
VG-520-, 367-368
VG-525-02-, 370
VG-533-01-, 358
405
VG-GSLT-, 184
VG-GSM, 180
VG-GSNG-, 184
VG-GSR, 137, 180
VG-GST, 124, 134, 182, 184, 195
VG-GSVBG-, 137
VG-GSWF-, 180
VG-J, 246-249
VG-LDA-100, 187
VG-LDNP-, 186
VG-LDP-100-, 187
VG-LDSP-, 186
VG-MBG-50-, 112
VG-NG, 244
VG-P0808-, 256
VG-P101, 138, 252
VG-P104D-, 240
VG-P105, 240, 244
VG-P116, 240
VG-P12, 243, 250-251, 261
VG-P125125BC-, 252
VG-P1345-, 241
VG-P14, 242
VG-P1515BC-, 252
VG-P1520, 252
VG-P18, 240, 246
VG-P1878, 253, 257
VG-P1910BC-, 253
VG-P1x1BC-, 252
VG-P2.5DB-, 261
VG-P2007-, 255
VG-P204-, 240
VG-P2115BC-, 254
VG-P251, 253-254
VG-P2520, 254, 257
VG-P2x2BC-, 252
VG-P316, 241
VG-P34, 250-251
VG-P350-, 260
VG-P37, 133
VG-P38, 243, 250, 261
VG-P3920BC-, 254
VG-P417CT-10, 250
VG-P5010BC-, 252
VG-P5015, 254, 260-261
VG-P5020BC-, 254
VG-P512, 255
VG-P516, 243, 250
VG-P58, 250-252
VG-P613-, 138
VG-P710-, 138
VG-P7701-10, 250
VG-P7GA, 241
VG-P813, 256
VG-P816F-, 256
VG-P820F-, 256
VG-P822F-, 256
VG-P824F-, 256
VG-P834F-, 256
VG-PBG7-NS, 245
VG-PBWS-125-10, 113
VG-PCR-25100-, 131
VG-PM10BC-, 243
VG-PM6BC-, 242
VG-PMBG-50-, 112
VG-PMI-, 197
VG-PSBG-50-10, 113
VG-Q, 276, 296
VG-RCBT-, 44, 47
VG-RS-, 112-114, 199-200
VG-RU-, 264
VG-S12, 215, 251
VG-S34HR-, 251
VG-S5015-, 261
VG-S58HR-, 251
VG-SBG-50-10, 113
VG-SC, 271, 316
VG-SE-582-, 273
VG-SPM-, 196
VG-SSCG-, 134, 188
VG-SSCT-, 137
VG-SSECG-, 134, 188
VG-SSF, 134, 180, 188, 190, 194-195
VG-SSLD-, 186
VG-SSLT, 122, 184, 190
VG-SSM, 180, 190
VG-SSNG-, 184
Copyright 2005 Solus Industrial Innovations, LLC. All Rights Reserved. 6/05
30152 Aventura
Rancho Santa Margarita, California 92688
phone: (949) 589-3900
fax: (949) 858-0300
Aston, Pennsylvania
Indianapolis, Indiana
(866) 765-8744
S o l u s i i
fax:
(866) 447-6587
4 4 S o l u s
solusteam@solusii.com
www.solusii.com
www.systemplastusa.com