SPECIFICATION FOR 11 KV ANTIFOG STRAIN DISC INSULTOR 120 KN 11 KV porcelain disc Insulator of size 305 mm dia and 145

mm in height, ball and socket type made of best quality H.T.porcelain, sound free from defects, thoroughly vitrified and smoothly glazed suitable for use in 110 KV transmission lines. The glaze shall be brown in colour. The glaze shall cover all the porcelain parts of the Insulator except those areas which serve as supports during firing or left unglazed for purpose of assembly. The insulator should be suitable for using in the 110 KV tower line in tension tower. The design of the insulator shall be such that stress due to expansion and contraction in any part of the insulator shall not lead to deterioration. The porcelain shall not engage directly with hard metal. Cement used in the construction of the insulator shall not cause fracture by expansion or loosening by contraction and proper care shall be taken to locate individual part correctly during cementing. The cement shall not give rise to chemical reaction with metal fittings and its thickness shall be uniform. The insulator shall be suitable for heavily polluted area and the minimum creepage distance shall be 460 mm and the minimum failing load should be 120 KN. Each insulator shall be legibly and indelibly marked to show the following:a) Name and trade mark of the manufacturer, b) Month and year of manufacture, c) Minimum failing load d) Country of manufacture. Marking on porcelain shall be printed and applied before firing. The insulator shall be marked with ISI certification mark. The 11 KV antifog disc insulator should have the following specification:Rated voltage : 12 KV Ball and Socket size : 20 mm Min. Power Frequency Dry : 90 KV Min. Power Frequency Wet : 55 KV Flash over voltage 50% impulse positive : 140 KV (peak) Flash over voltage 50% impulse negative : 150 KV (peak) Power Frequency Dry withstand voltage : 85 KV Power Frequency wet withstand voltage : 50 KV Impulse withstand voltage positive : 135 KV (Peak) Impulse withstand voltage negative : 135 KV (Peak) Puncture withstand voltage : 130 KV Visible discharge voltage : 18 KV

The Insulator shall generally conform to IS:731/1971 and IS:3188/1980 for dimension, IS:2486(Part-II)/1974 for ball and socket IS:2486(Part III)/1974 for R shaped locking device made of steel, all with latest amendments, and as per drawing enclosed for style No.1-027-OA with net weight of 8.7 Kgs. Necessary type test certificate obtained from Government approved laboratory should be submitted along with tender. Necessary routine electrical and mechanical test certificate in duplicate as per relevant IS should be furnished along with supply. Quantity: 1250 Nos. Delivery: within 30 days. SUPERINTENDING ENGINEER I ELECTRICITY DEPARTMENT PUDUCHERRY