Professional Documents
Culture Documents
The D 130 Leaflet
The D 130 Leaflet
The D 130 Leaflet
The D 130 is a rotor/stator type hand held tissue homogenizer which can rapidly dispersing, homogenizing, extractions, cell disruption, mixing, emulsifying, suspending samples in 0.1 - 50 ml of liquid or 1250ml depending on the dispersing shaft. During operation, the suspended material is drawn into the core of the homogenizer by a rotor turning at up to 30,000 rpm. The material is repeatedly cycled through narrow slits in the stator where it is rapidly sheared and disintegrated by high shear mechanical action. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in a few seconds. Little, if any, heat is produced during the process
0-40C, 95% rel. humidity IP20 89/336EEC,72/023/EEC, EMC acc. IEC/EN 61000-6-2 / 3, Safety acc. IEC/EN 61010-2-51
Speed range (rpm) Speed control type noise emission (drive only) Dimension LxWxH / ( mm) Weight (kg)
8,000 - 30,000 Dial knob 6 stage < 72 dB(A) at 30,000 rpm 250 x 250 x 400
Warranty Sterilization Method: pH Range: Suitable for solvents & abrasive substances:: Ultimate Fineness, Suspensions&Emulsion: (m)
1.6
Package Type
1 or 271010001)
( 271010000
(271010010 or 271010011)
Solid / liquid ratio Working Volume (ml) Shaft emersion depth (mm) Stator (mm) Recommended type of container or vessel
5 Eppendorf tubes
min.
ORDER CODE
271010001
D130 PACKAGE 2(Motor,Stand Set,Dispersing Shaft Set-10mm) -220V/50 Hz D130 PACKAGE 2(Motor,Stand Set,Dispersing Shaft Set-5mm) -110V/60 Hz DRIVE D130
271010010
271010011
271011000
STAND D130
271011010
271011020
271011030
271011040
271011050
Collette
271011060