Professional Documents
Culture Documents
Specification LR770D: SSC Customer
Specification LR770D: SSC Customer
Specification LR770D
SSC
Drawn Approval
Customer
Approval
Contents
1. Features 2. Absolute Maximum Ratings 3. Electric-Optical Characteristics 4. Reliability Tests 5. Characteristic Diagrams 6. Color & Binning 7. Outline Dimensions 8. Standard of Taping Empty Space 9. Packing 10. Soldering 11. Precaution for use
LR770D
Description Lamp LEDs are effective in hot thermal and humid condition. This high brightness and weather-resistant packaging design makes these Lamp LEDs ideal for
LR770D
Features
Diffused epoxy Lens Stand-off leads 5mm Oval package Viewing angle : 70/40 (x/y-axis) Dominant Wavelength : 625nm
Outdoor applications such as traffic signals, variable message signs and backlighting for transparent sign panels. Applications
Automobile display Electronic signs and signals Specialty lighting Small area illumination Backlighting Other outdoor displays
Notes : [1] t 0.1ms, D = 1/10 [2] No lower than 3mm from the base of the epoxy bulb.
V d
VF 2
elc
IR
Notes : [3] SSC maintains a tolerance of 10% on intensity and power measurements. [4] IV is the luminous intensity output as measured with a cylinder. [5] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 0.5nm for dominant wavelength. [6] A tolerance of 0.05V on forward voltage measurements
4. Reliability Tests
Item
Life Test High Temperature Operating Low Temperature Operating Thermal Shock Resistance to soldering Heat ESD (Human Body Model) High Temperature Storage Low Temperature Storage Temperature Humidity Storage Temperature Humidity Operating
Condition
Ta = RT, IF = 30mA Ta =100C, IF = 10mA Ta = -40C, IF = 20mA Ta = -50C (30min) ~ 105 (30min) (Transfer time : 10sec, 1Cycle = 1hr) Ts = 255 5C, t = 10sec 1kV, 1.5k ; 100pF Ta = 105C Ta = -50C Ta = 85C, RH = 85% Ta = 85C, RH = 85%, IF = 15mA
Note
1000hrs 1000hrs 1000hrs 100 cycles 1 time 1 time 1000hrs 1000hrs 1000hrs 100hrs
Failures
0/22 0/22 0/22 0/40 0/22 0/22 0/22 0/22 0/22 0/22
V
Notes : [1] USL : Upper Standard Level [2] LSL : Lower Standard Level.
Forward Current(mA)
40
30
5. Characteristic Diagrams
Ta= 25C Ta= 25C
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0
0 0.0
0.5
1.0
1.5
2.0
2.5
3.0
20
40
60
80
100
Ta= 25C
40
X Y
0.8
0.6
20
0.4
10
0.2
0 -60
-40
-20
20
40
60
o
80
100
120
0.0 -90
-60
-30
30
60
90
Directivity
Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00)
Luminous Intensity (mcd) @ IF = 20mA Bin Code S T U Min. 300 700 1200 Max. 700 1200 1700
Dominant Wavelength (nm) @ IF = 20mA Bin Code 1 2 Min. 620 626 Max. 626 632
Forward Voltage (V) @ IF = 20mA Bin Code 1 2 Min. 1.9 2.3 Max. 2.3 2.7
Available ranks
Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00)
x
2.5 0.05 1 .0 M IN 5 .8 0 .1 0 2 8 .0 M IN 7 .0 0 0 .1 0
After Before Purpose : Prevention of being Mixed & Reverse mounting Before : Insert the right PKG after removing defective product After : Attaching the right PKG on the backside after removing defective product
Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00)
4.630.10
7. Outline Dimensions
Unit : mm
1 .0 0.5 +0.2
-0.1
D E T A IL ANODE 0 .5 0 .0 5
2 .0 0 .2
y
1 .0 M A X
50
325
9. Packing
Unit : mm
95
170
0 27
480
Temperature [ C]
250
PEAK 10s
200
150
PREHEAT
100
50
0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36
T im e [s ]
2) Hand Soldering conditions Not more than 3 seconds at max. 350C, under Soldering iron.
3) Caution Lead frames are silver plated copper alloy. This substance has a low thermal coefficient (easily conducts heat) The LEDs must not be repositioned after soldering. Do not apply any stress to the lead particularly when heat.
Note : In case the soldered products are reused in soldering process, we dont guarantee the products.
3) Static Electricity Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. All devices, equipment and machinery must be properly grounded. It is recommended precautions be taken against surge voltage to the equipment that mounts the LEDs. 4) Heat Generation Thermal is one of the important parameter to design the end product. Please consider the heat generation of the LEDs. The operating current should be decided after considering the ambient maximum temperature of LEDs.
5) Others The color of the LEDs is changed a little by an operating current and thermal. Anti radioactive ray design is not considered for the products listed here in. Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used. When the LEDs are illuminating, operating current should be decided after considering the junction temperature. Cf.) Please refer Ambient temperature vs. Forward Current graph on page 5 The appearance and specifications of the product may be modified for improvement without notice.
SEOUL SEMICONDUCTOR CO., LTD. 148-29, Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL : +82-2-3281-6269 FAX :+82-2-857-5430 www.seoulsemicon.com www.zled.com