Professional Documents
Culture Documents
07 Hardware
07 Hardware
HARDWARE
07
Internal Housings & Housing Accessories Brackets, Spacers & Monitor Mounts IR & White Lighting Infra-Red Lighting Pan & Tilt Units Towers Specialist Housings & Brackets External Housings
252
235
242
236
VISTA VFTH/W
Washer Unit
DM/94072
DM/94075
Supplied with sunshield & bracket Installation kit supplied External option available
Extruded aluminium body, front & end caps in ABS Simple installation with easy camera access
VIH-CD120W
VLIH300W
120mm 75mm
300mm 73mm 84mm Yes Yes 2.7kg 5 Years Extruded aluminium body, front and end caps in ABS
DENNARD DM/94066
Wiper Unit
CONWAY IH4
Internal housing for medium sized cameras and lens combinations IP54 protection 270x70x80mm Internal housing dimensions Requires IB7 bracket
Wall Mount Bracket for the 2000 Pan & Tilt Range
DENNARD DM/436
DENNARD DM/428
Wall Bracket 15kg payload
INDOOR HOUSINGS
Manufacturer Part No
Internal half sphere dome housing, 120x185mm (LxDia.). Max camera width 75mm Internal housing c/w semi cable managed bracket 300x84x73mm IP40 wedge housing, small, 335x145x145mm Metal enclosure, powder coat finish, IP54 - 270x70x80mm In-ceiling housing, 229x97x76mm
Notes
VFDWBB
VFDWBW
New Products
Product Description
237
238
VSCMH250
IP Rating Internal Size L W H Material Bracket Fixed Weight Wiper Option Washer Deep Base Fan Vandal Catches Security Locks Anti Tamper Warranty
EXTERNAL HOUSINGS
V506FTH
IP65 230mm 80mm 75mm Aluminium Alloy Supplied 2.2kg No No No DM/F2010 No DM/L2010 DM/ATS 2 Years
DM/2010
315mm 105mm 86mm Yes Yes Supplied Yes 4.5kg IP66 240V AC 30W No 5 Years VCMH24F
VCMH(F)
VFTH
IP66 365mm 105mm 120mm Aluminium Alloy Supplied 3.5kg Yes Yes No DM/F No DM/L2010 DM/ATS 2 Years External 400mm 125mm 110mm 6kg IP66 1 year
DM/2015 HS01
315mm 105mm 86mm Yes No Supplied Yes 5kg IP66 240V AC 30W No 5 Years VSCMH24F 12-24V AC/DC
VSCMH(F)
L W H
110-230V AC 12-24V AC
BH20mk2 or P&T -
IP65 406mm 84mm 129mm Zinc Plate Steel DM/317 or DM/428 2.6kg DM/W DM/WW5/25 No DM/F VR No DM/ATS 2 Years External 400mm 125mm 110mm 6kg IP66 1 year
DM/506
250mm 75mm 70mm Yes Yes Supplied Yes 4kg IP66 240V AC 30W No 5 Years No 12-24V AC/DC
VCMH250
VCMH250
HS01/L
250mm 75mm 70mm Yes No Supplied Yes 4kg IP66 240V AC 30W No 5 Years VSCMH250/LV 12-24V AC/DC
VSCMH250 DM/508
VCMHF/B
BH20mk2 or P&T -
IP65 260mm 84mm 84mm Aluminium Alloy Supplied 4.5kg No No No No No No DM/ATS 2 Years External 225mm 85mm 80mm -
HS02B
388mm 108mm 75mm No No D317 Yes 2.6kg IP65 240V AC 20W Yes 5 Years No
V506FTH
IP65 440mm 135mm 125mm Aluminium Sheet DM/428 3.6kg DM/W DM/WW5/25 DB DM/F515 or DM/VS VR DM/L515 DM/ATS 2 Years External 225mm 85mm 80mm Supplied 3.54kg IP67 1 year
DM/515
Note: Vista housing dimensions are all internal 400mm 110mm 110mm No No VBRKT Yes 6kg IP65 240V AC 40W Yes 5 Years No IP65 485mm 160mm 155mm Aluminium Sheet DM/428 or DM/642 4.5kg DM/W DM/WW5/25 DB DM/F515 or DM/VS VR DM/L515 DM/ATS 2 Years External 180mm 85mm 80mm Supplied 2.54kg IP67 1 year
VFTH
HS02B/L
DM/516
VLHE300W
HS03B
300mm 84mm 75mm Yes Semi Supplied Yes 2.7kg IP65 240V AC 40W N/A 5 Years VLHE300W24 12-24V AC/DC
VLHE300W
VSCMHF
IP65 560mm 190mm 183mm Aluminium Sheet DM/642 6.3kg DM/W DM/WW5/25 DB DM/F515 or DM/VS VR DM/L515 DM/ATS 2 Years External 180mm 85mm 80mm 1 year Supplied 2.54kg IP67 -
DM/517
HS03B/L
Wall Mount, EH3512 Enclosure, 24V AC Specifically designed for EH3512 enclosures that use 24V AC Wiring concealed inside mount Video, power wiring preinstalled Adjustable pan/tilt head Mounts to wall or electrical box Pole, corner mount adaptors available
IP66 heating system with thermostat (on at 10C, off at 25C) Slide and hang service feature
Attractive styling Pressure die cast aluminium alloy construction O ring seal Semi-cable management bracket assembly (2010) Fully cable management bracket assembly (2015) Multiple voltage option Weatherproof to level IP66
EXTERNAL HOUSINGS
Vista Vista VCMH250 VFTH VCMHF 0033590 0036160 IP66 - integral bracket, fully cable management, 250x75x70mm Flip top housing, IP65, cool grey, 240V AC, 400x110x110 Vista 0032800 IP66 - 315x105x86, fully cable managed integral bracket, flat sided sunshield Vista VCMHF/B VSCMHF 0325300 IP66 - 315x105x86, fully cable managed integral bracket, flat sided sunshield black Vista 0032810 IP66 - 315x105x86, semi cable managed integral bracket, flat sided sunshield Vista VCMH24F 0033070 IP66 - 315x105x86, fully cable managed integral bracket, flat sided sunshield, 24V AC Aluminium construction. IP65-240x88x70mm Aluminium construction, IP65 - 342x115x86mm Complete with wiper, IP65 - 419x150x126mm DM/2010 IP50 housing, 110-230V, with wall bracket, 78x83x233mm internal size DM/2010 IP50 housing, 12-24V, with wall bracket, 78x83x233mm internal size IP66 fully cable managed version of DM/2010, 110-230V AC, 120x105x365mm, internal size IP66 fully cable managed version of DM/2010, 12-24V AC, 120x105x365mm internal size Extruded housing & bracket no heater Extruded housing & bracket 24V heater Extruded housing & bracket extended 24V heater IP65 - 110-240V 388x108x75mm c/w sunshield IP65 housing 12-24V c/w sunshield IP65 vandal resistant housing, 110-240V AC, 260x84x84mm c/w integral bracket for wall or soffit mount IP65 vandal resistant housing, 12-24V c/w integral bracket for wall or soffit mount IP65 housing, 110-240V AC, 440x135x125 c/w sunshield IP65 housing, 110-240V AC, 485x160x155 c/w sunshield IP65 housing, 110-240V AC, 560x190x183 c/w sunshield Super Connoisseur external medium housing IP66, toughened glass, 400x125x110mm 230V AC Compact Connoisseur external micro housing IP66, toughened glass, 180x85x80mm 230V AC, supplied with BH15 bracket Compact Connoisseur external IP67 compact fully cable managed housing with toughened glass, 225x85x80mm, 110-230V AC Compact Connoisseur external IP67 compact fully cable managed housing with toughened glass, 225x85x80mm, 12-24V AC Ceiling mount bracket for HS02B Indoor/outdoor 24V AC fixed camera housing with cable managed bracket Maximum security housing - outdoor, weatherproof, ceiling mount, 203x89x89mm Maximum security housing - corner mounted, 284x264x279mm Conway EH5 Conway EH4 Conway EH3 0038830 0038840 0038850 0030100 0048710 0048590 0238410 0239720 0327250 0327260 0327270 0008200 0038870 Aluminium construction, IP65 - 419x150x126mm Conway EH3/w Dennard DM/2010-707 Dennard DM/2010-606 Dennard DM/2015-707 Dennard DM/2015-606 DM DM DM DM/504-143 DM/504-150 DM/504-200
Supplied with sunshield & bracket IP65 rating Extruded aluminium body, front & end caps in ABS Simple installation with easy camera access Semicable managed bracket 2 x PG9 glands Installation kit supplied Internal option available RAL7035 Fully cable management with integral bracket
EXTERNAL HOUSINGS
Vista VLHE300W
Part No
0235300
External housing c/w semi cabled bracket & heater, 300x84x74 External housing c/w semi cabled bracket & heater, 12V DC/24V AC, 300x84x74mm IP66 - integral bracket, semi cable management, 250x75x70mm IP66 - integral bracket, semi cable management, 250x75x70mm 12/24V IP66 - 315x105x86, fully cable managed integral bracket, sunshield IP66 - 315x105x86, semi cable managed integral bracket, sunshield IP66 - 315x105x86, fully cable managed integral bracket, sunshield, 24V AC
DM/2010
Vicon
Vandal resistant housing, IP65, 485x169x136mm Bracket for EH3/VEH4, c/w swivel, 400mm long Vandal resistant housing, IP54, 250x75x80mm Vandal resistant housing, IP54, 200x120x110mm Vandal resistant housing, IP65, 250x100x80mm Vandal resistant housing, IP65, 200x120x110mm
New Products
Manufacturer
Quick Ref
Product Description
239
240
DENNARD BRACKETS
DM/642 DM/317 DM/428 20kg heavy duty fixed bracket Fixed housing bracket
PART NO.DESCRIPTION
DM/433B 4kg fixed camera bracket
DENNARD DM/433
VB1B
VB2W
VBCW 7.6 drop L shape ceiling bracket White VCB2 85mm wall/ceiling bracket Internal use RAL 7035 VB2W 15kg payload
DENNARD DM/428
Wall Bracket
Yes DM/436CB Not available Not available Not available Not available
VBCW
VCB2
VCMB 170mm wall/ceiling bracket Internal use Fully cable managed RAL7035 Locking screw
Add IRS or IRD (for dual IR)
Mount on DM/2000 PT
IR OPTION
No
VCMB
PROTOS B1
PROTOS B2 7.5 wall/ceiling bracket Auto lock Cool grey Same colour as ProtosIV camera range
PROTOS?B1
5.5 wall/ceiling bracket Auto lock Cool grey Same colour as ProtosIV camera range
PROTOS?B2
Heavy duty mount suitable for the DM/515, DM/516 and DM/517 Available in black or white options
Heavy duty mount for the DM/2000 pan & tilt range
DENNARD DM/317
It is important to remember that Auto Pan is not designed for continual 24 hour usage as this places undue strain on the Pan gearing. We do not recommend that the Auto Pan mode is used for more than 12 hours each day as any failure of Pan gearing due to the head being left in permanent auto pan is not covered by manufacturers warranties. It is also worth considering using more cameras instead of Auto Pan as the increased reliability and lower cost of CCD cameras can make this a more viable option. This is also applicable to pan and tilt heads fitted with presets. These are often left on a permanent tour and this can lead to premature failure of the pan/tilt unit and again is not covered by manufacturers' warranty. Please telephone our technical department for further advice. TIPS Care should always be taken when installing wipers to ensure that the camera does not view the blade. Simply switch them on and off a few times to find the worst case park position before installing the camera. Washer units can pump a nominal head of up to 10 metres, although it is best to keep this to a minimum for reliable operation. You should never install the reservoir above the housing as this can lead to the entire contents being syphoned away. Remember that washer units will also require re-filling on a regular basis.
WASHERS AND WIPERS FIXED SYSTEMS Wipers are often specified on fixed camera installations which necessitates the inclusion of hardwire or telemetry control to switch the wipers on and off. This is not usually cost effective and often unnecessary unless the angle of the camera housing means that the view is often obscured by rain or is sited in a dirty location. Wipers are not normally essential to a fixed camera system and are best avoided.
Surveyor-bottom mount, integral auto pan & heater, 240V AC Wall mount bracket for surveyor housing Observer-false ceiling mount, integral auto pan & heater, 24V AC Observer-false ceiling mount, integral auto pan & heater, 240V AC Black dome with clear window, 155mm dia. White dome with clear window, 155mm dia.
VISTAPOWERDOMEBRACKETS
VPD-P1000 VPD-P500 VPD-P250
WALL BRACKETS FOR WEATHERPROOF HOUSINGS VISTA POWERDOMETM BRACKETS AND MOUNTS
DM/436-CB 0047120 Conway Dennard Dennard Dennard Bewator Vista Vista Vista Vista Vista Vista Vista Vista Vista Vista Vista Vista Vista Vista Vista Vista Vista Vista
Bracket for EH5/EH4. c/w swivel, 280mm long Wall mount bracket for camera housings Use with DM/506 or DM/504 series bracket with 1x IR mount Use with DM/515, DM/516, DM/517 housing series (heavy duty)
Fixed 15kg housing bracket 280mm for HS01- 4" pcd mounting
Coupler (to join VDM-2MP together) Corner mount adaptor for wall mount bracket External pole mount adaptor for wall mount bracket External roof mount External swing arm mount External wall mount bracket VPD-CMAe
VPD-WM
250mm, internal pole, pendant mount 500mm, internal pole, pendant mount VPD-EPMA
1000mm, internal pole, pendant mount 2000mm, internal pole, pendant mount
Pole adaptor for PowerDomeTM Pole adaptor for VPD4 Solid ceiling adaptor Swan neck tower mount
VPD-ESM
New Products
Manufacturer
Quick Ref
Part No
Product Description
AUTOPANANDPRESETTOURS
TECHNICALTIP
241
242
BEWATOR WBH10
PVD1000 PVD1510 PVD1550 PVD1750 PVD1950 PVD2100 VFSM15 VLSM15 VFSM17
MONITOR TYPE
VLFSM17 VLFSM19 VFSM17MSL VFSM19MSL VFSM20cam
VWB9 TBA
VWB14/15 VWB14/15 VESA100 VESA100 VESA100 VWB10 VWB17 VWB20 VESA100 VESA100 VESA100 VESA100
VWBTV14f
VWB21TVe
WALL BRACKET
VWB14/15 VWB14/15
VISTA VCBTV14e
Deluxe options Powder coated
NO NO NO NO
2 Metre extension pole with coupler for use with deluxe range of brackets
VESAP&T20
VCBTV21e
CEILING BRACKET
VCB14/15 VCB14/15 VCBTV14f
Secure & safe mounting of monitor Ceiling mount (470mm drop) Robust design and construction
VESAP&T20
VCBTV21eDEL1M NO NO NO NO NO NO NO NO
The combination of monitors and brackets can, because of the varying dimensions, cause potentially unsafe installations. After a number of incidents we have initiated a vigorous testing programme to ensure compatibility of monitors and brackets to safeguard your interests. Following these tests we recommend the use of brackets and Vista monitors as detailed in this chart. However it must remain the responsibility of the installer to ensure the monitor and mount are secured safely at the time of installation
Other bracket/monitor combinations may be suitable but as, at the time of going to press, we have not tested them, We are unable to recommend their use.
DENNARD DM/428
15kg payload
OR
DENNARD DM/317
TECHNICALTIP
0036060 0036550 0032830 0032700 0020090 0020050 0020140 0008130 0004410 0003840 0004220 0003740 0022350 0022460 0136970 0196570
Bewator Bewator Bewator Dennard Dennard Dennard Dennard Dennard Bewator Bewator Pelco Pelco
BS40 BCS06 BCS12 DM/317 DM/426-150 DM/426-250 DM/426-350 DM/428 BP100 BS100 IWM24-GY IDM4018
Heavy duty wall bracket for use with pan and tilt heads Corner adaptor for use with VBRKT Pole mount for 1 x VSCMH(F) or VCMH(F) (50 - 140mm Dia) Pole mount for up to 2 x VSCMH(F) or VCMH(F) (50 - 140mm Dia) 40kg rated swivel mount adaptor, standard 4" pcd 6"/150mm column spacer, standard 4" pcd 12"/330mm column spacer, standard 4" pcd Wall mount bracket for camera housings 6"/150mm column spacer 10"/250mm column spacer 12"/350mm column spacer Use with DM/515, DM/516, DM/517 housing series 100kg 665mm long bracket for P60, FP50. Pan & Tilts 100kg swivel mount adaptor (standard 4" pcd ) IWM bracket. Wall mount for Spectra, DF5, DF8 IDM4018 mount
0093270 0092210 0093280 0093220 0093210 0255490 0291190 0255480 0093650 0098100 0096570 0091770 0091510 0091790 0091520 0091540 0091550 0093260 0093230 0093660
VESA 75 MOUNT
VESAP&T20
VFSM/VESA/WC VWB9 VWB10 VWB12 VWB14/15 VWB17 VWB20 VWBTV14f VWBTV21e VCB14del 1m
Vista ceiling mount monitor bracket for PVD1510/NVM14/NVM15 Vista ceiling mount monitor bracket for PVD1700/1750/NVM17 Vista ceiling mount monitor bracket deluxe with chrome for PVD17/NVM17 Vista ceiling mount monitor bracket for NVM20/PVD21 Vista ceiling mount monitor bracket deluxe with chrome for NVM20/PVD21 Vista ceiling mount monitor bracket for TV14e/TV14f 2 metre extension pole & coupler for Vista deluxe monitor mounts Deluxe ceiling bracket for TV14f Ceiling mount bracket for TV21e Deluxe ceiling bracket for TV21e Vesa tilt & turn bracket 75/100mm supports monitors up to 6kg Vesa tilt & turn bracket 75/100mm supports monitors up to 20kg Vesa flush fit wall bracket 100mm supports TFTs up to 30kg Ceiling bracket for TFT monitor 75 or 100mm Vesa mount, 1 metre drop, black Ceiling bracket for TFT monitor 75 or 100mm Vesa mount, 1 metre drop, cream Wall/ceiling bracket for TFT monitor 75 or 100mm Vesa mount, 1 metre drop, black Wall bracket for NVM9 Vista wall mount monitor bracket PVD10/PVD1000 Wall bracket for NVM12 Vista wall mount monitor bracket PVD1510/NVM14/NVM15 Vista wall mount monitor bracket PVD17/NVM17 Vista wall mount monitor bracket NVM20/PVD2100 Vista wall mount monitor bracket TV14f Wall mount bracket for TV21e Monitor mount for use PVD1510& NVM14
New Products
Manufacturer
Quick Ref
Product Description
243
244
ES3012 Series Integrated Positioning System ESPRIT PREMIUM PERFORMANCE P/T, COAXITRON COMPATIBLE
The enhanced Vista VPT AC series of pan and tilt mechanisms provides a comprehensive and flexible range of features geared to meeting all your pan and tilt requirements. The perfect medium heavy duty pan & tilt: These pan and tilts are particularly simple and safe to install and require little or no maintenance once the installation is complete. Unique side handles to aid positioning Externally adjustable limit switches Industrial standard connectors with connection details on unit 0.1 0 backlash for steadier pictures AC versions supplied with watertight cap to seal the connections when presets are not required Weatherproof to IP66 Compatible with UK standard housings and bracketry
Optional ImagePak integrated optics package Tilt range of +33 to -83 from horizontal Meets NEMA 4X and IP66 standards Lightweight aluminum construction Quick and simple electrical connections
Pan preset speed of 100 per second in 50mph winds and 50 per second in 90mph winds Designed for minimal maintenance, no gears to adjust
Integrated receiver, pan & tilt, and housing with no exposed cabling Variable speed advanced motor control technology
Zone blanking allows up to eight zones (programmable in size) to be set to output blank video
DENNARD DM/2000-500
Aesthetically styled
Payloads of up to 20kg (no need for counter balance weights) Pressure die cast construction 230V AC/110V AC/24V AC units 24V DC unit (type 2006) Weatherproof to BS.EN60529 level IP66 (no water ingress)
The following pan and tilt heads all use a similar "Amphenol" plug and have the same pin assignment as the diagram above.
VISTA
BEWATOR
VPT25K240 Mustang 12 Mustang 35
1 = Neutral (return)
TECHNICALTIP
V650 V670 V550
The following pan and tilt heads all use a similar "Amphenol" plug and have the same pin assignment as the diagram above.
VISTA
BEWATOR
VPT25K240 3 = Left Mustang 12 Mustang 35
Preset Lead
Earth
DENNARD
DM/2000
V670 V550
BEWATOR
4 = Up
5 = Down
Quick Ref
Part No
0164270
0137580
0169400
0169390
Vista Vista Dennard Dennard Dennard Dennard Dennard Bewator Bewator Bewator
Notes
Pro Pro: Pro: Con: Con:
Pro:
TOP MOUNT
Can fit two IR lamps on sidecheeks of pan/tilt. These act as a counter balance enabling you to use a lighter duty pan/tilt head. Compact size. Cannot be inverted. Restricted tilt often -45 to 0 dependant on housing fitted.
0157340
SIDE MOUNT
Can be inverted. Often cheaper. Large tilt often 180 Difficult to mount IR lamps, often required special brackets or drilling. Generally larger size
TECHNICALTIP
0301970 0297630 0163080 0169420 0156330 0041090 0036100 0036120 0041680 0118270 0041630 0051610 0073470 0138530 0138520
Product Description
TECHNICALTIP
V650
1 = 0v Return
Preset Lead
DENNARD
DM/2000
BEWATOR
2 = Tilt Position
3 = Preset + ve Supply
PELCO ESPRIT SERIES POSITIONING SYSTEM - COLOUR INTERNAL LIGHT DUTY PAN UNIT
Esprit IOP 22x high resolution w/pedestal adaptor PAL colour, wiper, pedestal mount, 24V AC Esprit IOP 22x high resolution with pedestal adaptor PAL colour, wiper, pedestal mount, 230V AC Esprit IOP 22x high resolution with pedestal adaptor PAL colour, wiper, wall mount, 24V AC Esprit IOP 22x high resolution with pedestal adaptor PAL colour, wiper, wall mount, 230V AC
Esprit IOP 24x high resolution with pedestal adaptor PAL colour/monochrome, wiper, pedestal mount, 24V AC Esprit IOP 24x high resolution with pedestal adaptor PAL colour/monochrome, wiper, pedestal mount, 230V AC Esprit IOP 24x high resolution with pedestal adaptor PAL colour/monochrome, wiper, wall mount, 24V AC
Corner mount adaptor for Esprit wall mount version Corner pole adaptor for Esprit wall mount version. Strap length - 77.38cm Tower/pole mount adaptor plate
25kg load top mount 240V AC, IP66 25kg load top mount c/w presets 240V AC, IP66 20kg load, top mount, 240V AC 20kg load, top mount, 24V AC, 12 degree per second pan 20kg load, top mount, 24V AC Pan and tilt, 230V AC, top mount c/w presets Pan and tilt, 24V AC, top mount c/w presets 16kg, top mount 230V AC c/w hd pots, presets, 2 metre prewired lead and 3 year warranty 16kg, top mount 24V AC c/w hd pots, presets, 2 metre pre-wired lead and 3 year warranty Heavy duty 50kg side mount pan & tilt 240V AC with presets, heater
New Products
Manufacturer
245
246
The enhanced Vista VPT DC Series of pan and tilt mechanisms provides a comprehensive and flexible range of features geared to meeting all your pan and tilt requirements. These pan and tilts are particularly simple and safe to install and require little or no maintenance once the installation is complete. Innovative design combined with advanced production techniques and modern styling make this unit the benchmark for the next generation of pan & tilt heads. An integral slip ring assembly mounted inside the column base, enables constant panning facility. Ease of maintenance and servicing has been significantly improved over conventional pan & tilt designs. All external fixings are the same size. Options and accessories can be retro-fitted with plug-in wiring. The DM/2006CR pan & tilt head can be operated upright or inverted and is available as a 24V DC unit. Aesthetically styled 24V DC unit Payloads of up to 20kg (no need for counter balance weights) Pressure die cast construction Weatherproof to BS.EN.60529 level IP66. (no water ingress)
DENNARD DM/2006CR
As only a few manufacturers pan and tilt heads, housings and brackets are interchangeable with each other, it is advisable that only one manufacturers' equipment should be used for each complete head.
TECHNICALTIP
VPT DC
24V DC Top 7.5kg VBRKT IP66 25kg
48 per sec
Outdoor
Presets (P)
BEWATOR P16T
5 year warranty
Dennard
Wall bracket for DM/2000 range of pan & tilts Payloads up to 100kg Suitable for corner mounting
Vista
Bewator
Vista
Notes
Housing Selection a)Internal dimensions should be large enough for the camera lens combination, allowing plenty of room for wiring. plus a healthy safety margin of around 10% up to 3kg for snow and ice (if applicable) 1kg for cable drag 1kg for wind resistance
b)If pan and tilt is required, the weight of the camera/lens, I/R (if used), hand wiper (if used) should be added together and evaluated. The following allowances should be made:
TECHNICALTIP
VPTDC 0038080 DM/2000-308 DM/2000-309 P25T/D P25/D P66/D12 0050460 0050470 0337080 0022290 0169650 VBRKT 0036060 DM/436 DM/160 DM/165 DM/642 BP40 BP100 0048190 0041340 0048650 0038900 DM/436-CB 0047120 0020000 0022350
DM/2000-310
0051090
Pan and tilt, 24V DC, top mount with continuous rotation and presets
25kg load, top mount c/w presets, 24V DC, IP66 20kg top mount, 24V DC 20kg top mount, 24V DC, with presets 16Kg top mount, c/w presets, 48/24 deg sec, 24Vdc Light duty external 3kg top mount pan & tilt 12V DC 10/4 deg
25kg, side mount 24V DC c/w heavy duty pots, 2 metre pre-wired lead and 5 year warranty (warranty covers pots)
Mounting dome
a)Allow plenty of time for selection of mounts because they will often need to be specially manufactured. If this decision is left to the last minute, it will increase lead times. ceiling mount (how high is the ceiling?)
c) Infra-red lamps hang low, so 6" column spacer should be used to stop them fouling pan and tilt head brackets (if used).
New Products
Manufacturer
Part No
Product Description
OUTDOOR DC PAN & TILT HEADS - VARIABLE SPEED WALL BRACKETS FOR OUTDOOR PAN/TILTS
247
248
VIRLED LED
VISTA IR LAMPS
VIR50W 50 Watt MF100 715nM 220-240V AC 220-240V AC 900nM
INFRA-RED LIGHTING
DERWENT UNIFLOOD
300 SERIES Low running costs less than 60% of ordinary 300W lamp 500 SERIES Low running costs less than 50% of ordinary 500W lamp Even illumination Cosec2 beam patterns Long life - average 3,000 hours High performance gold optics MFLED Long life - average 1 year bulb life Even illumination Cosec2 beam patterns
VIRLED
300 SERIES
VIR50W
DENNARDDM/2025IRLEDILLUMINATOR
Wide angle of view to 70 degrees at close range Low power consumption 4 power settings Vandal resistant Lightning protection Environmental protection to IP66 Illumination to 160 metres LED wavelength 850nM faint glow visible Typical LED life >5 years 2 axis wall mounting bracket (included)
DERWENT MINIFLOOD
MF100 Hallogen illumination MFLED LED illumination IR up to 20m 12V DC or 24V AC Small and compact IR up to 50m
500 SERIES
VISTA VIR300WS
IP66 Stone guard 300W 715nM 220-240V AC IP66 Photocell
IR600 Series 500 watt lamp with built-in photoswitch. To convert to 60 degree wide angle use IR WIDE. IR600 Series 500 watt lamp with built-in photoswitch. To convert to 60 degree wide angle use IR WIDE. IR300 Series 300 watt lamp. To convert to 60 degree wide angle, use IR WIDE. For automatic on/off operation at dusk and dawn use PCL1000 photocell.
Single lamp use PSU SS. Dual lamp system use PSU ST. Power supply comes with built-in soft start, photocell, and volt-free telemetry contact. Built-in 12V DC power supply (5 series only)
TECHNICALTIP
ILLUMINATION COVERAGE
Derwent Flood IR600 & IR300 IRWIDE VIRLED V902 IR50SP V900 & V950 VIR50W VIR300W DM/880N20 DM/880N50 DM/880M20 DM/880M50 Derwent Spot Derwent 10 Derwent 30 DM/2020N-500W DM/2020N-300W DM/2020M-500W DM/2020M-300W DM/2020W-300W
Maximum illumination range is dependent on weather conditions, contrast of the scene and ambient light levels. For guidance, maximum distances obtained for spot lamps are: 500W 300W 50W 30W = 150 - 200 metres = 80 - 120 metres = 15 - 30 metres = 5 - 15 metres
60 8 10 30 11 20 9 58 39 40 20 60 30 30 30 24 36 21 38 10
Infra-red lamps are available in different powers and with either 715nM or 830nM filters. The choice of filter is dependant on a combination of factors: a) can the user accept that the light can be easily seen. 715nM lamps look like a red traffic light at night.
Model
INFRA-RED LIGHTING
Vista VIRP120-8-850 0332940 120 deg 850nm max 8 IR lamp with PSU (Inc Photo cell) + BRKT Dennard DM/2020-500N715 0050690 500W IR narrow angle, 715nM filter with photoswitch and stone guard AOS
x x x x x x x x x x x x x x x x x x x x x
b) range of illumination (high powered 715nM filters illuminate most). c) the camera used. If for example, you must use a low power, 830nM filter, then you will require a high sensitivity camera such as a Vista VPM420 or Baxall ICE-B2H/M. d) lenses with a large aperture (small 'F'stop) should be selected. e) lamps should be selected to match lens angles.
9 23 9 16 20 20 50 30 20
Vista Vista
Vista
VIRP30-160-850
0332450
30 deg 850nm 160m IR lamp with PSU (Inc Photo cell)l + BRKT 280 x 195 x 66mm 4Kg IP66 120 deg 850nm 64m IR lamp with PSU (Inc Photo cell) + BRKT 280 x 195 x 66mm 4Kg IP66 30 deg 850nm 80m IR lamp with PSU (Inc Photo cell)+ BRKT 210 x 150 x 65mm 4Kg IP66 120 deg 850nm max 32 IR lamp with PSU (Inc Photo cell) + BRKT 210 x 150 x 65mm 4Kg IP66 120 deg 850nm max 16 IR lamp with PSU (Inc Photo cell)+ BRKT
VIRP120-64-850 VIRP30-80-850
Vista Vista
VIRP120-32-850 VIRP120-16-850
Horizontal
60
Vertical
60
Cosec2 Cosec2
30 8
15
20 24 36 21 38 10
DERWENT SYSTEMS 'UNIFLOOD' 500 IR LAMPS DERWENT SYSTEMS 'UNIFLOOD' 300 IR LAMPS
Bewator Bewator IR600 0024210 IR-WIDE 0020080 Vista Vista Vista VIR300WS VIR300WF VIR300PC 0033130 0033160 0337710 Dennard DM/2020-300M715 DM/2020-300N715 0050080 Dennard Dennard 0050090 DM/2020-300W715 0050110 Derwent Derwent Derwent Derwent Derwent Derwent 500/10/730 500/30/730 500/S/730 500/F/730 PSU5 SS PSU5 ST 0010880 0010910 0010930 0010950 0010960 0010890 Derwent Derwent Derwent Derwent Derwent Derwent Derwent 300/10/730 300/30/730 300/F/730 PSU3SS PSU3ST 300/S/730 0011180 0011170 0011160 0011150 0011140 0327180 Dennard DM/2020-500M715 0050700
500W IR medium/wide angle, 715nM filter with photoswitch and stone guard
Photocell for VIR range IR lamps 300W max comes with switch for Day/night camera 300W IR medium angle, 715nM filter with photoswitch and stone guard 300W IR narrow angle, 715nM filter with photoswitch and stone guard 300W IR wide angle, 715nM filter with photoswitch and stone guard
Vistas new range of IR & white lighting systems, fully integrate with ProtosIV day/night range of cameras, driving cameras to monochrome mode under the control of the integrated photocell on the units PSU, ensuring systems lighting and day/night switching are totally in sync, completely removing all issues of hunting assosciated with day/night switching, as will be seen on all other camera / lighting combinations
Uniflood 300, even illumination cosec 10 730nM Uniflood 300, even illumination cosec 30 730nM Uniflood 300, Flood 60, 730nM Uniflood 300, Spot 6, 730nM 0011130 Uniflood 300 PSU, single lamp, inc photocell Uniflood 300 PSU, twin lamps, inc photocell Uniflood LED, 10o lens, 850nm Uniflood LED, 20o lens, 850nm UFLED-10-850 Derwent UFLED-20-850 0327190
Fully integrate with ProtosIV D/N cameras Distances beyond 160m (30) Distances beyond 160m (30) Ultra Wide angle beyond 64m (120) 5 Year warranty Exceptionally low running costs Zero maintenance C/w power PSU and adjustable photocell
Uniflood 500, spot 6, 730nM Uniflood 500, flood 60, 730nM Uniflood 500 PSU, single lamp, inc photocell Uniflood 500 PSU, twin lamps, inc photocell
Uniflood 500, even illumination cosec 10 730nM Uniflood 500, even illumination cosec 30 730nM
New Products
Manufacturer
Product Description
Quick Ref
TECHNICALTIP
VISTA IR LAMPS
249
250
Camera It can be a minefield for installers faced with impressive claims of zero or low lux2 cameras, but in essence, without light there can be no picture. All CCD cameras offer some degree of IR response though some have enhanced IR performance that make them more suitable for longer range applications or for use with low power IR sources such as LEDs (Light Emitting Diodes). The latest chip sets (such as EXview and EXwave) offer excellent low noise, high resolution, and low smear characteristics together with excellent IR response. Day/night cameras are intended to provide the best solution for 24 hour surveillance colour by day and monochrome /IR sensitive by night. There are different forms of day/night cameras with some incorporating optical filters that are
IR is sometimes called black light and lies approximately between 700nM and 1,000nM1 (1 micron). The eye cannot efficiently see beyond 730nM whilst CCD Cameras can see up to 1000nM and this enables the use of semi-covert and covert IR applications.Diagram A demonstrates what the human eye can see (the photopic curve) and what a normal monochrome camera can see (CCD), also illustrated on this diagram is the increased sensitivity of specialist IR sensitive cameras (extended IR CCD). Notice that the camera sensitivity drops as the wavelength increases. This means that the camera sees less of the light distributed on the scene. There is often a requirement for semicovert or covert installations. Graphs B, C and D demonstrate a 730nM filter, 830nM and 950nM filter. The 730nM filter will glow similar to a traffic light, an 830nM filter will give off a dull red glow only just visible to the human eye. The 950nM will appear covert, with no glow visible. The key factors in choosing the type of IR lamp relate to the required viewing distance and scene. As demonstrated in the diagrams below the sensitivity of the camera is an important element, additionally the lens sensitivity and type play an important role. When designing CCTV systems for effective 24-hour surveillance three issues are central: the camera, the lens and illumination.
DEFINING INFRA-RED
Illumination The key to a successful night scheme is having sufficient light, the right quality of light and the right control over the light. The best solution is IR lighting at the camera head controlled by either telemetry (for manual switching on/off) or photocell (for automatic operation when the light drops below a certain level). The viewing distances that can be achieved depend upon camera and lens type and these can affect system performance by as much as 50% compared with daylight operation. All cameras are less efficient at 850nM and achievable distances can be reduced by at
Lens At night, it is essential to maximise the light gathering capability of the lens (i.e. have the lowest `f` stop) but this will reduce the depth of field of the picture, which may cause focusing problems. An auto iris lens will naturally open to its maximum aperture (lowest `f` stop3) in low light operation but on a fixed lens there may need to be a compromise between the low light operation and its depth of field focussing. Daylight and IR light do not focus on the CCD at the same point because of the different ways in which the wavelengths of light pass that through the lens. This may cause a focus shift between daytime and IR operation. The degree of focus shift may depend on a variety of factors depending on the quality of lenses, the wavelength of the IR filter (830nM & 950nM) will give a more exaggerated focus shift and the IR response of the camera. Some manufacturers have developed a range of lenses with zero focus shift between daytime and IR performance. This is of considerable interest to CCTV system designers especially for unmanned or non-telemetry controlled installations.
INFRA-RED, AN EXPLANATION
automatically moved over the CCD sensor for daytime/colour operation IR optical filters (cut filters) are used as IR light distorts the colour display and removed during night-time/monochrome to maximise the low light sensitivity by allowing IR light to pass to the CCD. Other camera designs incorporate specialised filters which do not move but which have both good colour performance and IR sensitivity.
least 25%, whilst at 950nM the performance of many camera/lens combination can be reduced by over 60% compared with daylight conditions. When choosing an IR lamp, consideration should be given to the lamps ability to provide even illumination. This ensures that the returned radiated energy to the camera is the same for wherever the subject is in the scene and avoids white out on the screen. Additional factors such as bulb life and running costs should also be taken into account. In general, IR lamps driven via the mains tend to have considerably lower bulb life and higher running costs than low voltage IR lamps. It is also important to match the camera lens to the beam pattern of the infra red light. Mismatching in this area can lead to either poor picture quality or loss of IR efficiency. For example, a camera with a 8mm lens on a 1/2 inch CCD would give a 43 degree horizontal spread (approximately) but if a traditional spot and flood approach was used here, the resulting picture would more then likely have a white circle in the centre of the screen. This is because a spot lens will only illuminate a small selection of the field of view. The flood lens may be wasting 30% of its energy outside the field of view. Solid-state devices such as LEDs (Light Emitting Diode) bring major advantages, including lower maintenance levels and lower power consumption. The LED units can provide up to 10 years life. However, they provide less power on scene then halogen IR lamps. LEDs are beginning to make a bigger impact on the CCTV scene because of the increased IR sensitivity of emerging monochrome cameras. Certain manufacturers combine the camera, lens and LED illumination into one package. These are sometimes termed IDN products, which means Integrated Day and Night (IR) performance. These products sense the ambient light levels and switch on the IR when insufficient light is available. However, the achievable distance with IDN products is usually less then 50m so it is only suitable for certain applications.
400nm 500nm 600nm 700nm 800nm 900nm 1000nm Blue Green Orange Red InfraRed
400nm 500nm 600nm 700nm 800nm 900nm 1000nm Blue Green Orange Red InfraRed
400nm Blue
500nm 600nm 700nm 800nm 900nm 1000nm Green Orange Red InfraRed
400nm Blue
500nm 600nm 700nm 800nm 900nm 1000nm Green Orange Red InfraRed
Full sunlight
1 nM stands for Nanometre - 10-9 of a metre - and is used to measure the distance between the wavelengths of light. The distance between light wavelengths determines the colour of light eg at 400nM, 2 Visible light is measured in Lux (metric measurement of light striking a surface) and is not applicable to IR. IR illuminators are 0 Lux by definition. 3 The light gathering speed of the lens is expressed as an f-stop number. This measures the amount of light captured by the lens in a given period of time. The lower the f-stop range, the more light that can be transmitted which in turn leads to a higher quality of captured image.
LUX
REF
INFRA-RED LIGHTING
Derwent Derwent Derwent Derwent SuperLED-10-850 SuperLED/20/850 SuperLED/30/850 SuperLED/60/850 0327200 0143080 0140000 0156610 SuperLED, 10 lens, 850nm SuperLED, 20 lens, 850nm SuperLED, 30 lens, 850nm SuperLED, 60 lens, 850nm Derwent Derwent MICROLED 850W MICROLED 850M 0143090 0143100 MicroLED, Medium 60 lens, 850nm MicroLED, Medium 30 lens, 850nm Vista Dennard Derwent Derwent
DERWENT SuperLED
High Power Solid State LED IR up to 175 Long life LED Very low running costs
DERWENT SYSTEMS 'MINIFLOOD' 100 IR LAMPS DERWENT SYSTEMS 'SUPERFLOOD' IR LAMPS DERWENT SYSTEMS 'MICROFLOOD' IR LAMPS IR LED ILLUMINATORS
Manufacturer
Miniflood 100, 10 lens, 730nm Miniflood 100, 30 lens, 730nm Miniflood 100, 60 lens, 730nm Miniflood 100 PSU, single lamp Miniflood LED, 10 lens, 850nm Miniflood LED, 20 lens, 850nm, 12/24 Miniflood LED, 30 lens, 850nm, 12/24 Miniflood LED, 60 lens, 850nm, 12/24 Miniflood LED PSU, powers up to 2 lamps
IR LAMP ACCESSORIES
VIR50W DM/880M50-715 DM/428IRS DM/888/2
LED, 900nM, IR lamp, up to 10 metres range LED IR Illuminator, 850nM with 30 beam width - 160 metre coverage Uniflood LED, 30 lens, 850nm Uniflood LED, 60 lens, 850nm
0033000 0007240
Wide, 715nM filter, 50 watt c/w heat resistant cable, 240V AC Medium 715nM filter, 50 watt, 12V AC
Vista Vista
Vista
Fully integrate with Vista ProtosIV DN cameras 120 wide angle illumination Distances beyond 24m 5 Year warranty Colour corrected White-Light for accurate colour representation Exceptionally low running costs Zero maintenance C/w power PSU and adjustable photocell Applications for both colour CCTV and commercial lighting
0038690 0007410 0040730 0020300 0022580 0011060 0011090 0332950 0332960 0332970 0332980
VIRB50W VIR300WPHOTOCELL DM/HX502 DM/HX504 DM/891N DM/891M IR50-FBULB IR300-BULB IR600-BULB IR950-BULB IR900-BULB D886N D886W MINILL UNILL UNIPF AF200 THE890 (M40) THE890 (M40) RL-HID-MHB
0033060 0038680 0050990 0050970 0004250 0004260 0022680 0020220 0024180 0023040 0023850 0004450 0004350 0327210 0011120 0010970 0010760 0102780 0102780 0328390
50W flood for VIR50W lamp Photocell for VIR range IR lamps 300W max Narrow replacement bulb for DM/2020 (500W) IR illuminator Medium replacement bulb for DM/2020 (500W) IR illuminator Replacement spot bulb for DM/890 (50W) IR illuminator Replacement wide bulb for DM/890 (50W) IR illuminator 50 watt IR bulb for IR50-F 300W bulb for IR300 lamp 600W bulb for IR600 Replacement bulb for IR950 Replacement bulb for IR900 300W flood for VIR300WS lamp 300W flood for D885 & VIR300WF lamps Replacement bulb kit MF100 Replacement bulb kit for Uniflood 300 Replacement bulb kit for Uniflood 500 Bulb kit for Derwent Uniflood (old type) Infra-red lighting 500W single-ended M40 Infra-red lighting 500W single-ended M40 Replacement bulb for Raylux HID
Light duty wall bracket with single IR lamp fitting PSU for DM/880 micro IR lamp c/w photocell, will drive 2 x 20 watt or 1 x 50 watt PSU c/w photocell for 1 x DM/883 or 2 x DM/880 series Photocell for IR lamps Dual IR lamp mount for P60T Single OTT bracket for P&T heads Double OTT bracket for P&T heads
120 White max 24 lamp with PSU (including Photo cell) + bracket 280 x 195 x 66mm , 4Kg IP66 120 White max 18 lamp with PSU (including Photo cell) + bracket 210 x 150 x 65mm 4Kg IP66 120 White max 12 lamp with PSU (including Photo cell) + bracket 120 White max 8 lamp with PSU (including Photo cell)+ bracket
New Products
Product Description
251
252
Technical Issue The adoption of varifocal lenses has caused difficulty in specifying lighting. With varifocal lenses the exact FOV is often only established on site through trial and error making exact matching to fixed angle lighting impossible in advance. Raytec provide a range of Adaptive Illumination varifocal lighting allowing the output angle of an illuminator to be adjusted on site to match the set-up of a varifocal lens.
White Light RM200 RM100 RM50 RL50 RL200 RL100 RM25* (non AI) RL25 (non AI) PRODUCT WAVELENGTH White-light White-light White-light White-light IR IR IR IR 10-20 300m+ 125m n/a n/a n/a n/a n/a n/a 30-60 160m 40m n/a n/a 80m 20m 60m 42m ILLUMINATION ANGLE 28m n/a n/a 56m 14m 42m 30m 50-100 112m 120-180? 12m 8m 16m 8m 32m 64m 24m 18m
2. Angle The illumination should ideally match the angle the camera / lens is set-to in order to provide best performance. If not, and too narrow an illumination angle is chosen, the camera will simply see a bright spot in the middle of the scene and the contrast between light and dark areas on scene will be too great to provide high quality images. Illumination which is too wide wastes energy and reduces achievable distance.
1. Infra-Red or White-Light? Identifying the purpose of the system identifies the type of light to use.
Infra-Red Full Colour Easy Setup Covert ADVANTAGES
Infra-Red light provides greater distance, a varying degree of invisibility (depending on the exact wavelength) and no light pollution. Infra-Red is light designed only to be used by CCTV cameras. White-Light provides the opportunity to illuminate an area for pedestrians, staff or vehicles in addition to the CCTV system. It can also be used as a visual deterrent, turned on when an intruder is detected by a PIR.
Longer Distances No Light Pollution Visible deterrent Reduced Distances Limited Deterrent More Difficult to set up Light Pollution DISADVANTAGES Colour Day/Night Monochrome Day/Night Monochrome CAMERA TYPE STYLES
ADAPTIVE ILLUMINATION Designed for RAYMAX Infra-Red and RAYLUX White-Light illuminators, Adaptive Illumination allows the installer to adjust the angle of the light projection from a single unit to fit the specific demands of any installation. Adjustment is quick and convenient and any angle from 30-60 degrees is easily selectable. Adaptive Illumination is patent pending technology available exclusively from Raytec.
3. Distance? After selecting the angle, the next consideration is distance. How far should the lighting illuminate? Installers and specifiers should be aware that as angle increases, distance decreases. Raytec publish a table of achievable distances using their products. See table on page 252 CCTV LIGHTING FOR DOMES
The specialist wide angle illuminators provide 120180 illumination meaning it is now possible to illuminate up to 360 at significantly less cost and with less installation effort, than ever before using only 2 illuminators. Wide angle illumination is technically the best solution to dome illumination providing purpose designed, even illumination fitted at the camera.
Wide Angle Lighting Achieving 360 degree lighting for domes has traditionally been very expensive, requiring multiple illuminators. However, we now offer a series of wide angle illuminators from Raytec purpose designed for fully functional domes. The new wide angle illuminators are available in RAYMAX (Infra-Red) and RAYLUX (White-Light) variations and are fitted with Adaptive Illumination providing varifocal lighting. Adaptive Illumination is a new concept introduced and patented by Raytec allowing the installer to adjust the horizontal beam angle on site to match the specific needs of the installation.
RAYMAX IR LIGHTING
Manufacturer
Raytec Raytec Raytec Raytec Raytec Raytec Raytec Raytec Raytec Raytec Raytec Raytec Raytec Raytec Raytec Raytec
RM25-30 RM25-50 RM25-120 RM25-50-C RM50-AI-120 RM50-AI-30 RM50-AI-50 RM50-AI-50-C RM100-AI-30 RM100-AI-50
0293370 0328190 0328200 0328210 0328220 0293350 0303890 0328230 0293250 0328240 0328250 0328260 0293330 0320320 0328270 0328280 0328290 0328300 0328310 0328330 0328340 0328350 0328360 0328370 0293380 0328380
RAYMAX 25; 30 degree; 850nm;c/w psu RAYMAX 25; 50 degree; 850nm;c/w psu RAYMAX 25; 120 degree; 850nm;c/w psu RAYMAX 25; 50 degree; 950nm;c/w psu RAYMAX 50; 120-180 deg Adative Illumination 850nm;c/w psu RAYMAX 50; 30-60 deg Adaptive Illumination; 850nm;c/w psu RAYMAX 50; 50-100 deg Adaptive Illumination; 850nm;c/w psu RAYMAX 50; 50-100 deg Adaptive Illumination; 950nm;c/w psu RAYMAX 100; 30-60 deg Adaptive Illumination; 850nm;c/w psu
Notes
New Products
Quick Ref
Part No
Product Description
253
254
ALTRON ACT2FB
Due to the volatile nature of the current global steel market, which is out of our control, these products might be subject to price increases without prior notification.
ALTRON AW1698
To help make your installation easier, we can arrange for towers to be delivered directly to the installation site
If you wish, the bases of the towers can be delivered early to enable civil works to take place prior to the main component arriving. Although columns are more secure than towers (cable running inside the structure) they are not as stable (towers having the stronger lattice structure). If in doubt call our sales teams.
Remember, if you are using pan and tilts, you could use telemetry receiver brackets. Remember, if ordering the accessories separately, the correct information is given on the tower you have, or want.
Remember, when using a wind down tower you require a winch suited for that tower.
TECHNICALTIP
TOWERS
ALTRON WIND DOWN COLUMN (POST TO BE MOUNTED IN CONCRETE) ALTRON WIND DOWN COLUMN (BASE TO BE BOLTED ON CONCRETE) ALTRON STATIC TOWER (BASE TO BE MOUNTED IN CONCRETE) ALTRON WIND DOWN POLE
Altron Altron ACC1/FB ACC2/FB Altron Altron Altron ACC1/PM ACC2/PM ACC3/PM
Quick Ref Part No
ALTRON ACC2FB
TOWERS
Altron ACT2/PM 0045550 0045360 6.0 metre wind down tower. Post mount Altron ACT4HD/PM 9.0 metre wind down tower. Base post heavy duty Altron Altron ACT1/BP ACT2/BP 0045920 0045290 4.5 metre wind down tower. Base post 6.0 metre wind down tower. Base post Altron AW1859/6 0050570 6 metre tubular tilt-down pole range Altron Altron Altron Altron ACP1 ACP2 ACP3 ACP4 0046320 0046380 0046440 0049150 3 metre wall mounted column 4 metre wall mounted column 5 metre wall mounted column 6 metre wall mounted column Altron Altron AW1545/6BAS 0049890 AW1545/8BAS 0050380 Combined cabinet based camera pole - 6m Combined cabinet based camera pole - 8m Altron Altron Altron DW1000/AT DW1500/AT SGT1 0286730 0264550 Auto brake winch for ACC1/2 and ACT1/2 Auto brake winch for ACC3, ACT3 and ACT4 Tower anti-climb frame. (Match number to tower), supplied only with tower - other options available on request Altron Altron Altron Altron Altron Altron Altron Altron
ALTRON WIND DOWN TOWER (POST TO BE MOUNTED IN CONCRETE) ALTRON WIND DOWN TOWER (BASE TO BE BOLTED ON CONCRETE)
0045600 0159710
255
New Products
4.5 metre static column. Fixed base 6.0 metre static column. Fixed base
4.5 metre wind down. Post mount 6.0 metre wind down. Post mount 7.5 metre wind down. Post mount
0045770 0250900
4.5 metre wind down. Base post 6.0 metre wind down. Base post
4.5 metre static tower. Fixed base 6.0 metre static tower. Fixed base
Due to the volatile nature of the current global steel market, which is out of our control, these products might be subject to price increases without prior notification.
SGC1 0046000 ATBT1 0046030 ATBC1 0046060 LS1 0045480 Column ladder stay PTS-1 0045440 Static pan & tilt bracket to mount 1x housing Twin mounting bracket for static housing Twin mounting bracket for PTZ cameras TB-2600F TB2-1000 TB3-600F 0075160 0141050 0047070 Triple mounting bracket for static housing
Column anti-climb frame. (Match number to column), supplied only with tower - other options available on request
Tower telemetry receiver bracket, adjustable - other options available on request Column telemetry receiver bracket, adjustable - other options available on request
Product Description