Professional Documents
Culture Documents
Camese2010 11
Camese2010 11
Camese2010 11
SP Robotic CSM*
EPCM is a leading supplier of Stainless Steel Cathodes and Cathode Stripping Systems for the base metal electro-refining and electrowinning industry. Our systems have a range of automation levels that vary from 40 to 500 cathodes per hour. Since 1992, EPCM has been involved in projects that are utilizing more than 750,000 cathodes and which produce over four million tonnes of copper annually. Our development and continuous improvement programs have created innovations which are a major benefit to copper producers around the world. Some of the innovation highlights are: Robotic material handling SP Cathode washing Under running transfer car Full length edgestrip press
Superior Performance
EPCM cathode washing and stripping systems utilize robotic technology for material handling. The benefits of robotics over conventional carousel and linear conveyor systems are: Reliability Leveraging the rigorous reliability demands of the automotive industry, EPCM brought this standard to the tankhouse by pioneering the Robotic CSM. The robots used in the EPCM stripping systems have a history of over 64,000 operating hours between major failures (MTBF). Flexibility The use of robots increases operating and layout flexibility. Since the stripping stations are modular, multiple stations can be used to increase operating capacity. As well, optional stations such as sampling, corrugating and clinching can easily be added to an existing system without a major cost or down time. Noise Reduction The use of robots for stacking eliminates the need for traditional sheet stackers which drop sheets a greater distance generating higher noise levels. Lower Capital Cost In most applications, a robotic stripping system can be installed on a flat floor slab without the requirement for extensive pits and machine foundations. Improved Maintainability The use of robots results in a better equipment installation for maintenance and cleaning access. Energy Efficient The robots utilize efficient servo motor drives which have greater electrical efficiency than hydraulic systems commonly used on custom material handling equipment.
* Patent pending
TANKHOUSE TECHNOLOGY
SP
CAMESE 2010/2011
Contents
Welcome Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Contents: Subsectors of the Canadian Mining Supply Industry and Member Companies Serving under Subsectors . . . . . . . . . . . . . . . . . . . . . . . . 7 Corporate Profiles of Canadian Mining Suppliers . .16 What is CAMESE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 CAMESEs People . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 CAMESEs Board of Directors . . . . . . . . . . . . . . . . . . . .68 Trade Show Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . .151 Country Interests Service . . . . . . . . . . . . . . . . . . . . . . . 152 Additional CAMESE Members . . . . . . . . . . . . . . . . . . 155 CAMESEs Participation in International Mining Events . . . . . . . . . . . . . . . . . . . 158 Masthead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Member Companies Index . . . . . . . . . . . . . . . . . . . . . . 159
ISSN 1485-8401
Canadian Publications Mail Agreement #40033359 Printed in Canada
This 15th annual issue of the CAMESE Compendium of Canadian Mining Suppliers presents our associations corporate members, which are Canadian mining suppliers looking to market their products and services to the mining industry across Canada and worldwide. To reflect the diversity of our growing membership, the definitions of CAMESEs subsectors in the Canadian mining supply industry have been expanded. You can review them with members listings on the Contents pages. CAMESE is particularly pleased to congratulate Goldcorp Porcupine Gold Mines, North Americas longest continually operating gold mine, as it celebrates its 100th anniversary. This years cover photo by Graeme Oxby features Goldcorps Hoyle Pond and Dome underground mines and central milling facility. Goldcorps operating properties, combined with extensive and highly prospective land holdings, are strategically located in one of the worlds greatest gold-producing camps, which has produced more than 65 million ounces of gold to date. With nearly 1,000 exploration and development projects in offshore locations, Canadas mining industry is known around the world for supplying highly advanced technology at competitive costs. To help you run successful, modern mining operations here and abroad, you can find mining suppliers to serve you within the pages of this Compendium or on www.camese.org. Either contact our members directly for further information on their offerings, or ask CAMESE staff to help you find the right business partners to fill your specific needs. Bienvenue au Compendium 2010/2011 CAMESE des Fournisseurs Miniers Canadiens. Ce livre nest publi quen anglais. Cependant le site web de CAMESEs www.camese. org est galement disponible en franais. Bienvenido al 2010/2011 Compendio de CAMESE de Abastecedores Canadienses para la Mineria. Este libro se publica solamente en ingls, pero la pgina web de CAMESE en www.camese.org esta disponible en espaol. Yours sincerely,
Celebrating 100 years of continuous gold mining, Goldcorps Dome Mine, Timmins, Ontario.
Cover Photo: Graeme Oxby Photography
TRUCKS,LOADERS&SCOOPTRAMS
WWW.LMPOWERTRAINPARTS.COM
1-819-824-3820
Email: ent@montali.com Website: www.montali.com
Geochemical, ore, process and environmental sample analysis; umpire assay services; laboratory equipment; density measurements; conductivity measurements; susceptibility; IP/resistivity. accurassay Laboratories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Exceptional service. Expert analysis.
Expertise, equipment and technology for process and machinery automation; business intelligence tools; robotics; underground and surface communications; vehicle automation, monitoring and safety. alberta innovates Technology Futures . . . . . . . . . . . . . . . . 155
Measurement solutions for industrial processes
A world leader in radio and infrared remote control systems and related products for underground mining
Asset evaluations for pricing, surplus asset sales, mine closure equipment liquidations, used equipment sales. mackwood mine services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Asset valuations, mine closure liquidations and equipment sales
nL Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Best-in-class communications and lighting solutions that set the standard for optimum safety and productivity Committed to the development and commercialization of teleoperation and mine automation solutions
assoCiaTions
Activities of national, provincial and regional trade associations for the Canadian mining industry. Canadian diamond drilling association . . . . . . . . . . . . . . . . . 20
National and provincial voice of the drilling industry
Trident Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Explosives manufacturing systems, blast-monitoring analysis equipment and consulting; blast hole bits. instantel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
The worlds most trusted vibration and overpressure monitoring equipment Practical solutions to blasting problems throughout the world
BuiLdinGs, poRTaBLe
Turnkey camp rental, structures for housing, storage and many other applications. design shelter inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Habitat not your ordinary tent
megadomenL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Suppliers of membrane-covered galvanized steel structures Meeting the demand for temporary shelter
An innovative building alternative providing immediate cost-effective solutions for remote mining sites Proven expertise in redeployable shelter systems
Weatherhaven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
www.camese.org
Components, equipment, engineering design and consulting services for moving bulk materials including fabricators of skips, cages, loaders, unloaders, mine-cars, rock breakers, samplers, conveyor systems, rollers, idlers, pulleys, vulcanizers, mixers, filters, speed reducers, gear-motors; stackers, reclaimers, grizzlies, chutes, chute loading systems, slusher hoists, tramp metal detectors, belt rip detection systems, drive control systems, abrasion resistant piping, castings and gears. aG mining equipment inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Bulk materials
Services in geology, project development, ore reserve estimation, feasibility studies; due diligence, project monitoring, failure analysis, engineering for mining, metallurgy, mechanical, civil, electrical, geotechnical; turnkey contracting, research and development. a.C.a. Howe international Limited . . . . . . . . . . . . . . . . . . . . . . 42
Geological and mining consulting services for exploration and development around the world
BBa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Consulting engineering firm specialized in energy and mining
norwest Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Employee-owned energy, mining and environmental consulting company Meeting your geotechnical, hydrogeological and environmental engineering challenges worldwide for 30 years
piteau associates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Thermal night vision cameras, no-drill laptop mounts, remote control flood lights, side-view cameras, back-up cameras, video accident recorders; truck video products; digital incident/accident recording systems; rear-view video systems; submersible lamps; emergency lighting, warning lights, D.O.T. lighting, back-up cameras, reversing aids. Winsted Group inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Vision Enhancement Specialists: equipment/remote camera systems, LED/HID lighting and back-up alarms
Companies have a responsibility to provide principles and performance guidelines that respect all stakeholders equally within the corporate framework including employees, customers, local communities and shareholders. e3 plus: a Framework for Responsible exploration . . . . . . . 47
A CSR Initiative of the PDAC
Remote site catering and camp management services; materials handling, facilities and systems management; liquid logistics, remote-site storage tanks for water and fuel. aTCo structures & Logistics (asL) . . . . . . . . . . . . . . . . . . . . . . 39
Provider of camp site support services and facilities management worldwide
www.camese.org
Services including design and manufacturing of packaging, crating export packaging, tracking, vacuum sealing cargo, loading containers, high risk packaging for military weaponry/equipment or nuclear cargo, and project management and warehousing. Brent packaging & Logistics Ltd ./ emballages & Logistique BRenT . . . . . . . . . . . . . . . . . . . . . . 48
Serving the Canadian marketplace for more than half a century
dooRs
pacific Bit of Canada inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 pacific Rim engineered products Ltd . . . . . . . . . . . . . . . . . . . 157
Designing, manufacturing and servicing industrial equipment since 1969 One-site shopping for pneumatic and gasoline-driven diamond drills, percussion rock drills, and replacement parts Resource life cycle management from start to finish Specialists in customized drill-bit production Providers of full-service drilling solutions
Diamond core, rotary, reverse circulation, raising, surface and underground contract drilling services. Bradley Bros . Limited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Award-winning international provider of drilling solutions and services within safe environmental practices
Resource energy solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 safari diamond Bits Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 sphere drilling supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Drilling underground and surface: hydraulic, pneumatic, reverse circulation, in-the-hole drills, jumbos, raise-boring equipment; auger drilling rods, drill steel and parts, hammers, diamond and button-bits, drill fluids, pump systems, carbide bit re-furbishing, seals, wireline accessories. atlas Copco exploration products . . . . . . . . . . . . . . . . . . . . . . 51
Manufactures diamond-core drilling equipment and develops mineral exploration solutions Unique drilling solutions for a wide range of uses
Products and services for training personnel in mining skills, training program development. noRCaT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Non-profit specialized training programs in mining technology and research testing
The emerging standard in cost-effective simulation for training heavy mining-equipment operators
Canun international . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Pneumatic rock drills by Canun where product quality equals productivity The original manufacturer of precision button-bit grinding systems
Electrical components and management tools, power resistors, power cables, power cable couplers, ground fault protection systems, electric drive raise climbers, ruggedized equipment, starters, high voltage equipment, switchgear, electric generators, batteries. arkbro industries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Hoists, raise climbers and other equipment for raise mining, horizontal drifts and tunnels, and inclined and vertical shafts
Cme Blasting and mining equipment Ltd . . . . . . . . . . . . . . . . . 53 Control Chemical (1989) Corporation . . . . . . . . . . . . . . . . . . . . 53
MATEX: Leader in environmentally safe drilling fluids and lubricants
Leading developer of speed control for electric motors in North America Electrical product distribution around the world EECOL has it all Formerly IPC Resistors Custom electrical system protection devices Produces electrical equipment for the mining industry that puts you in control of your energy use Your best choice for power resistors
Cubex Limited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Designs, manufactures and services Megamatic drills long, straight holes Premium diamond drilling bits, shoes, shells and equipment for all formations Diamond drilling tools and precision machining
Festo inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Worldwide supplier of pneumatic and electrical automation technology Diamond tools, equipment and accessories for mineral exploration and geotechnical drilling
Fordia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Foremost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Manufacturer of mining and mineral exploration drills, tooling and accessories
staticon Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Established provider of DC and AC power supply solutions . . . by design!
www.camese.org
Varisystems Corp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Cable assemblies for a broad spectrum of applications
enGineeRinG ConTRaCToRs
eXpLoRaTion suppLies
Information, professional services and technologies covering environmental science, planning and engineering for mines and processing; treatment of sewage and acid mine effluents; mine closure services, engine emissions control, water treatment equipment and services, waste water treatment, environmentally sound exploration practices; portable storage systems; liquid logistics; on-site storage tanks for water and fuel; pest control; secondary containment for hazardous fluids military and commercial. BiodisK Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Packaged wastewater treatment solutions worldwide
Services including financing, banking, tariffs, overseas fees, e-commerce trade, international investments and loans, taxes, accounting or tax preparation software, contract support and customs documentation. Custom House, a Western union Company . . . . . . . . . . . . . 155
Provider of international payment and foreign exchange solutions Government export credit agency to help Canadian mining suppliers develop international business The worlds local bank
Fuel and liquid handling equipment and services. sei industries Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Engineers remote site liquid logistics and environmental solutions
GeopHYsiCaL insTRumenTaTion
Airborne, surface and borehole instrumentation for mineral exploration and other applications, including electromagnetics, magnetics, magnetotellurics, induced polarization, seismic, surveying. Crone Geophysics & exploration Ltd . . . . . . . . . . . . . . . . . . . . . 78
Explore deeper and smarter with 3-D Pulse EM
Geonics Limited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Solutions to unique maintenance and repair problems, filtration, rebuilds, portable align boring machines, abrasion -resistant steel, blades, wear studs, plastic components, abrasion and corrosion resistant coatings, rewinds and repairs to motors, repairs and replacements for bushings, wear plate impact pads and lining materials, jacks, welding supplies, ground engaging tools, tires. a .L . sims & son Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Equipment sales, rentals, parts and repair
Cogep inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
10
www.camese.org
Ground, airborne and borehole geophysical survey contractors and consultants for mineral exploration and mapping; compilation, processing, enhancement and interpretation of data; software for geophysical interpretation. abitibi Geophysics inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Let Abitibi help you find a mine
Services including information and services to develop and increase export and trade activities, lobbying and advocacy services at federal and provincial government levels, global procurement, regulatory affairs management, issues and public policy management, consulting services for international investing and marketing projects abroad, information services for in-country local sales/ manufacturing/production processes and procedures, communication services. Business Beyond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Your doorway to Ottawa support your key to markets abroad
Equipment, supplies and applicators for grouting, shotcrete, abrasion-resistant piping, paste backfill, rock bolting, seismic monitoring and geotechnical instrumentation. ConmiCo inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Ground support systems you can build on
GeoTeCHniCaL insTRumenTaTion
Monitoring instrumentation, including ground movement monitors, extensometers, inclinometers, load cells, strain gauges, pressure cells, piezometers, data loggers, water and groundwater monitoring systems. mine design Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
MDTs SMART line of products: Intelligent instrumentation for mining Where instrumentation technologies meet
multiurethanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Services for the design, supply, upgrading and refurbishment of mine hoists, rack and pinion hoists, winches, tuggers, sheaves, slushers, wire rope and wire-rope testing equipment. Hepburn engineering inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Complete hoisting systems, electrical controls, software and automation Hoist rebuilds, controls upgrades, inspections and service for all hoists
www.camese.org
11
Rotesco inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
World leader in the non-destructive testing of steel wire ropes Custom-engineered winches, hoists and sheaves since 1947
mappinG seRViCes
Services including advertising, e-commerce, mining sector information, marketing, corporate image development, print and electronic publishing, and trade show exhibitions. Canadian mining Journal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Providing quality editorial and in-depth coverage on topics that matter for more than 125 years
Digital topographic and orthophoto mapping; geomatics; land surveying; GPS surveying, satellite image. eagle mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Globally delivering customized, high-quality LiDAR data, digital mapping and imagery
infomine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Worldwide mining portal site and business centre on the Internet Your personal, professional, trade-show meeting planners and marketing logistics experts The Bible of the mining industry
Various equipment and components, including wood, steel and high-density polyethylene construction products, corrugated metal construction, land surveying. armtec Limited partnership . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Manufacturer and distributor of steel and high-density polyethylene construction products for use in the civil engineering market Advanced engineering solutions in corrugated metal
Services including life, group and business insurance, classes of executive and business risk insurance, product and cargo risk management, specialized solutions peculiar to mining industry needs. assessment Rehabilitation services inc . (aRs) . . . . . . . . . 155
Vocational rehabilitation and occupational therapy solutions Brokered insurance solutions
Services including legal advisors, intellectual property protection, international law, due diligence, mining closures, real estate for mining industry projects, property dissolution, liability protection, litigation and ransom negotiations. Gowling Lafleur Henderson LLp . . . . . . . . . . . . . . . . . . . . . . . 156
Registered patent agent
Abrasion resistant pipe, high density polyethylene pipe and fittings. dYnapRo equipment Limited . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Manufacturer of pumps and innovative pumping solutions
LiQuid HeaTinG
Submerged combustion liquid heating systems; mineral processing liquid heating systems. inproheat industries Ltd ./subCom . . . . . . . . . . . . . . . . . . . . . . 91
Offers SubCom, the ultimate solution for heating or evaporating difficult-to-heat liquids with maximal energy efficiency and minimal maintenance and supervision
Technosub inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
LuBRiCanTs
Crushers and parts, grinders, ore-processing plants, electrical motors, grinding rod, mill liners, process heating equipment, centrifugal concentrators, wet and dry process filtration, electrolytic cells, process control samplers, retorts, grizzlies, screens, pumps, pump parts, castings and assemblies, clarifiers, samplers, mixers, dryers, filters, agglomerators, cyclones, gears, ceramic corrosion-resistant lining systems, rubber products such as abrasion resistant liners, corrosion control coatings, pinch valves, hoses and expansion joints, rubber components, fibreglass reinforced parts such as pipe, grating and solvent extraction systems, abrasion resistant piping, remanufactured and used equipment. acorn Commercial Trading (aCT) Limited . . . . . . . . . . . . . . . . 99
Leading international supplier of industrial pipes and pipe fittings
Consultation on social aspects of mining development; mineral policy and mining legislation; mineral resource data management; human resource management; employee search and selection; intellectual property protection, representation services. C .J . stafford & associates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
International search/recruitment specialists to the mining, metals and minerals industries with Alliance partners in Australia, Chile, U.S.A., South Africa and Peru
american Biltrite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Geotemps international . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
12
www.camese.org
Contract services for shaft sinking, raise boring, mine development and mining; engineering services, including mining, metallurgical, mechanical, civil, electrical and geotechnical; turnkey contracting; ground control; construction services; surveying. dmC mining services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Premier supplier of services and solutions to the mining industry One of the worlds largest engineering and consulting firms serving mining, metals, energy and manufacturing companies
Hatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Landry Filtration products inc . . . . . . . . . . . . . . . . . . . . . . . . . . 156 major Wire industries Limited . . . . . . . . . . . . . . . . . . . . . . . . . 103
Innovative screen media solutions to maximize production
mininG insTRumenTaTion
Control and monitoring instrumentation, airflow monitoring; laser alignment, cavity monitoring, tramp metal detection, drill-hole surveying, gas and environmental monitoring, geotechnical monitoring. Conspec Controls Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Defining standards for gas and environmental monitoring, mine-control systems and underground wireless communications
Total solution provider to your problems of wear and abrasion when separating ores
Produces quality machinery parts for any destination in the world on time and cost effectively Premium screening specialists
Mineral processing chemicals, minerals and logistics. Fondel Chemicals Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Cost-effective global sourcing and shipping of specialty chemicals and metals
W . s . TYLeR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Process engineering; mineral processing, hydrometallurgical, pyrometallurgical and refining design and testing; crusher refurbishment; flow sheet development; pilot plants; new, remanufactured and custom-designed equipment for mineral processing. ausenco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Innovative and cost-effective engineering, procurement, construction and project management services for mineral processing Research consortium of mining companies for the optimization of mineral dressing processes
Wireless communications technologies for successful RFID (radio frequency identification) chip applications. mine Radio systems inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Products for automation, communication and control to increase safety, productivity and profitability
CoRem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Specialized services in risk insurance management of personnel, property, goods, equipment and underground mining or mining projects. snowden mining industry Consultants inc . . . . . . . . . . . . . . 120
Professional services from internationally renowned experts
p . R . engineering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
www.camese.org
13
Health and safety supplies, footwear, cap lamps, communications and charging systems, protection systems integration, warning systems, worker protection systems and components; health risk management and environmental disease detection. alliance mercantile (1958) inc . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Wear Viking gear with its 100% waterproof guarantee for all your safety needs Worlds leading provider of international medical assistance, healthcare and security services Protection since 1934
New and used surface mining machinery, dumpers, pins and bushings, engine cooling fans, climate control systems, haulers, hydraulic seals, pistons, pumps and bearings, wheels, rims, tires, tire handlers and manipulators, machinery parts and attachments, braking resistors, brake systems, clutch systems, cable reelers, dozer blades, buckets; gears; used and reconditioned equipment. aRGo uTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Extreme off-road performance
Services including international security and risk advisors, crisis management including intervention, personnel and property protection, private security strategy, security force training, security policy and procedures development, security force hiring and management. BGn Risk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Identifying, reducing and managing your most significant risk and security issues
oRo design & manufacturing Ltd . . . . . . . . . . . . . . . . . . . . . . . 133 polar mobility Research Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Specialists in mobile heavy equipment, heating and air conditioning The worlds leading supplier of low-ground pressure track vehicles Provides the product you need to make maintenance of heavy equipment easy and safe Building better wheels
Process consultants; copper electro-winning equipment; material handling equipment; automation services; insulators for hydrometallurgical refining industry, Tuyere punchers; insulators. epCm services Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Dominant global supplier of cathode manufacturing and tankhouse handling equipment for the electrorefining and electrowinning of copper and other base metals Tuyere Line management products...Your smelters path to increased copper/nickel production
soFTWaRe
Management, processing, analysis, display and presentation of exploration, mining, geomechanics, process and environmental data; ore reserve calculations; mine-wide information systems, process control and optimization; mine planning, GIS; training; laboratory information systems; hardware and business software, information technology systems. assaynet Canada inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Solutions for automated information systems
TRade ConsuLTanTs
Provides e-commerce development and strategies; services for export promotion, subcontractor searching, advice on international market planning/development, financial support, and trade show consulting. Canada economic development for Quebec Regions . . . . 155
Assists small and medium-sized enterprises in developing export markets Helping small- and medium-sized Northern Ontario businesses become self-reliant communities through increased international trade Your trade bridge to the Chinese mining market
14
www.camese.org
Services including customs documentation, shipping, materials handling, document preparation and cargo tracking, logistics software, export packaging, logistics, transportation, supply chain management, freight forwarding, third-party contract charters for air/sea, transportation management, risk management and heavy lift. Bellville Rodair international (BRi) . . . . . . . . . . . . . . . . . . . . 136
Specialists in handling and transporting heavy-lift cargo to and from mining projects around the world Smart solutions for end-to-end logistics Your total transport solution
CeVa Freight Canada Corporation . . . . . . . . . . . . . . . . . . . . . 155 CK Logistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Cole Freight inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Customs brokerage, international freight forwarding, trucking, warehousing and consulting Best-in-class global freight management solutions Creating unique transportation and logistics solutions for the mining industry worldwide
savino del Bene Corp . (Canada) . . . . . . . . . . . . . . . . . . . . . . . 157 Trendway Transportation services inc . . . . . . . . . . . . . . . . . . 157
TRanspoRTaTion eQuipmenT, aCCessoRies and seRViCes
Tim mcdowell equipment Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Wabi iron & steel Corp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Custom fabrication and casting solutions for the mining industry
Rail car covers, flat cars, highway trailers, tracked vehicles, intermodal equipment and containers, trucking and intermodal haulage, bulk handling. ecofab maintenance Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Provides worldwide railcar cover solutions
Ventilation fans; flexible ducting and accessories; airflow metering systems, gas sensors, venting systems. aBC Ventilation systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Customized ISO 9001 quality-assured ventilation systems to fit your underground needs
New and used underground mining equipment; diesel engines, wheels, rims, tires, tire manipulators, rack and pinion hoists, machinery parts and attachments, including power train components, buckets, tanks, hydraulic seals, gears, castings, braking system, wear products, electrical and automation systems, mobile service equipment. arkbro industries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Hoists, raise climbers and other equipment for raise mining, horizontal drifts and tunnels and inclined and vertical shafts Your answer for specialized equipment needs
Jne Consulting Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Rocvent inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 simsmart Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Provides ideal optimization of underground mining ventilation systems
Technologies for acid mine drainage treatment, water purification, waste water treatment. iC Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Water Analysis Equipment Specializing in rugged pH sensors for the mining environment Manufacturer of packaged wastewater treatment plants for mining camps around the world
www.camese.org
15
A lab technician loads samples into a spectrometer for analysis at IAMGOLDs, Niobec Niobium Mine, Saguenay Region, Qubec.
l aCCurassay Laboratories
Accurassay Laboratories, through its focus on operational excellence, provides industry-leading turnaround time and service reliability to the mining and mineral exploration industry. Accurassay has designed its processes to quickly prep and analyze your soil, whole rock and core samples for gold or other precious metals, base metals and rare earth elements. Its newly expanded, high-capacity laboratory, based in Thunder Bay, Ontario, uses reliable and ISO/IEC 17025 accredited methods including fire assay, ICP and XRF. Accurassays primary and satellite operations cover Qubec, Newfoundland, the Maritimes and Western Canada. From project to project, a wide range of service elements may include Accurassays tenday turnaround guarantee, simplified all-in-one program pricing, the development of local sample prep facilities, and access to online sample status information through Acculink. For fast, accredited test results at competitive pricing, look to Accurassay to be your service partner.
Contact: Brad McBain VP Sales & Marketing Address: Suite 126 4026 Meadowbrook Drive London, Ontario N6L 1C7, Canada Phone: 1-519-266-4643 Fax: 1-519-652-8638 Email: bmcbain@accurassay.com Website: www.accurassay.com
16
www.camese.org
See Country Interests Section for Latin America and the Caribbean.
Contact: Eric Hoffman Address: 1336 Sandhill Drive Ancaster, Ontario L9G 4V5 Canada Phone: 1-905-648-9611 Fax: 1-905-648-9613 Email: ancaster@actlabs.com Website: www.actlabs.com
www.camese.org
your guide to Canadian mining technology on the internet.
Camese Compendium of Canadian Mining Suppliers www.camese.org
17
Services
or you are faced with a mine closure, contact Mackwood Mine Services. They guarantee you will receive the optimum value for the sale of your surplus equipment.
and mine closure liquidation programs. They have a proven track record and maintain an impressive list of client references. If you have surplus assets you are hoping to sell
18
www.camese.org
Associations
Canada Day (July 1, 2010) fireworks over the historic McIntyre headframe sponsored by Goldcorp in celebration of their 100th Anniversary in the Porcupine area, Timmins, Ontario.
CIM was selected by the Government of Canada to play an integral role in the development of the Centre for Excellence in Corporate Social Responsibility. In the office or out in the field, members can access an extensive grassroots network through
www.camese.org
19
Associations
l Canadian diamond driLLing assoCiation
Founded in 1938, the Canadian Diamond Drilling Association is the national and provincial voice of the drilling industry. It comprises contract drilling companies, drilling manufacturers, mining companies, suppliers and individuals. Member contracting companies account for the majority of drills used in the western hemisphere. Association members are recognized worldwide for their leadership and expertise in the provision of high-quality drilling services and products. The associations mission statement supports drilling contractors and suppliers in the provision of highquality services and products for their clientele. In addition to providing members with information and advice, the CDDA works closely with federal and provincial governmental agencies to improve the existing regulatory environment. An important function of the association is to keep its members informed of these numerous and constantly changing regulations. The CDDA is recognized as a reliable source of information and a valuable consultant on all matters concerning the drilling industry, by the government and the membership.
Contact: Secretary-Manager Address: Suite 437 101 Worthington Street East North Bay, Ontario P1B 1G5, Canada Phone: 1-705-476-6992 Fax: 1-705-476-9494 Email: office@cdda.ca Website 1: www.cdda.ca Website 2: www.canadiandrilling.com
Canada remained the top destination for global exploration in 2009, attracting 16% of world spending. The industry accounts for 19% of Canadian goods exports.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
Associations
l greater sudbury deveLopment Corporation
Greater Sudbury Development Corporation: The City of Greater Sudbury is home to North Americas highest concentration of mining expertise. From capital equipment to consumables, engineering to mine construction and contracting, from mapping to automation and communications its companies are innovators. More than 300 mining products and services companies are located within the City of Greater Sudbury. At the Greater Sudbury Development Corporation, its their job to make the connections that count whether its making introductions to local companies, providing market intelligence or providing investment and exporting information. So, if youre looking for the latest in mining technology or thinking of establishing a presence in the industry you should be looking to the City of Greater Sudbury.
Contact: Paul Reid Address: Tom Davies Square 200 Brady Street Sudbury, Ontario P3E 5K3, Canada Phone: 1-705-674-4455, ext. 4608 Fax: 1-705-671-6767 Email: paul.reid@sudbury.ca Website: www.sudbury.ca
Over 300 mining products and services companies are located within the City of Greater Sudbury.
The products of the mining industry help build the highways, electrical and communications networks, housing, automobiles, consumer electronics and other products and infrastructure essential to modern life.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
21
Associations
l mining suppLiers assoCiation of b.C. (msabC)
The Mining Suppliers Association of B.C. (MSABC) was formed in 1986 and is affiliated with the Mining Association of British Columbia (MABC). The members of MSABC are firms servicing the mining industry. MSABC advocates the importance of mining to the economic well-being of the province. MSABC is committed to promoting the development of a sustainable mining industry in B.C. with the government and the public. It is an effective lobbying force on behalf of the mining industry. In addition to advocacy, benefits include networking (several major events with the MABC and Western Mine Maintenance Association); weekly email reporting activities of B.C.-registered mining companies (local and offshore) that are sourced from daily news releases and numerous publications; and a personnel list (senior staff at operating mines and head offices). In 2001, a local chapter was established in the Kootenays, called the Elk Valley MSABC, for more direct contact with the coal industry.
Contact: Terry Mulligan, Executive Director Address: Suite 900 808 West Hastings Street Vancouver, British Columbia V6C 2X4, Canada Phone: 1-604-681-4321, ext. 111 Fax: 1-604-681-5305 Email: tmulligan@mining.bc.ca Website: www.miningsuppliersbc.ca
www.camese.org
22
www.camese.org
Goldcorps Hoyle Pond Mine operator controls the automated underground tram from an office on surface, Timmins, Ontario.
www.camese.org
23
production reporting using standard web browsers. Hepburn electrical controls and Hoist Manager operating systems can be retrofitted to existing hoisting plants, as well as incorporated in new hoists, to improve automation, performance, productivity, safety and maintenance. See the Hepburn company profile under Hoisting Equipment.
See Country Interests Section for Asia-Pacific, Latin America and the Caribbean, North America and Worldwide.
Contact: John Hepburn, President Address: 73 Six Point Road Toronto, Ontario, M8Z 2X3, Canada Phone: 1-416-638-4425 Fax: 1-416-638-2070 Email: sales@hepeng.com Website: www.hepeng.com
24
www.camese.org
l trident group
Trident Group takes pride in providing the most comprehensive set of services for mobile mining equipment in the industry, complete with staffed engineering and documentation departments. Its Nautilus Automation division designs, installs and maintains radio remote control interfaces, video and proximity detection systems using industry leading Nautilus equipment or end-user selected equipment. Trident also supplies data acquisition and management as well as equipment management systems. The Groups Trident Mining Systems (TMS) provide complete welding and machining and trades services to overhaul, modify, re-power, repair and maintain LHD and drilling equipment. Staffed with experienced electrical, hydraulic, and mechanical specialists, TMS takes pride in exceeding expectations. Tridents remanufactured equipment operates at a lower total cost of operation (TCO) than new equipment. Z Equipment Sales and Leasing, the asset management division, buys, sells, rents and leases mobile equipment and assists mines in asset liquidation.
Contact: Rene Fink, President Address: 6075 King Street Porcupine, Ontario P0N 1C0, Canada Phone: 1-705-235-4888 Fax: 1-705-235-4911 Email: reception@tridentgroup.ca Website: www.tridentgroup.ca
www.camese.org
25
Engineered to specific certification standards Effective in hazardous and non-hazardous environments ISO 9001:2000 registered
l nL teChnoLogies (nLt)
NL Technologies (NLT) is an innovator of technologies that improve safety and productivity in the mining industry. NLT designs and manufactures cap lamp systems and digital communication systems. Northern Light cap lamp systems are the Brightest and the Best, designed for maximum durability and comfort, while offering integrated tracking, power take-off and two-way communication lighting systems. In 2009, NLT launched the MSHA, IECEx and ATEX approved all-inone cordless cap lamp-Polaris, which integrates the battery and light source in one enclosure. The contemporary design gives it a new-age look while maintaining a superior light pattern thats consistent with NLTs other lamp technologies. Northern Light Digital offers a holistic approach to communications within the underground mine. The Northern Light Digital Network is an open standard network using Ethernet protocol and wireless communication technologies to enable a fully connected digital mine. The digital network and software solution supports myriad applications including personnel and equipment tracking, two-way communication, VoIP, proximity detection, environmental monitoring and video and data transfer to meet all demands of the modern mine.
Contact: Nataly Simonian Marketing Coordinator Address: 33 Laird Drive Toronto, Ontario M4G 3S9, Canada Phone: 1-416-425-6559, ext. 252 Fax: 1-416-425-5960 Email: nsimonian@nltinc.com Website: www.nltinc.com
26
www.camese.org
robomap: robotic mapping and surveying system run with a handheld wireless remote, the robot accurately maps tunnels, terrains and other complex spaces, transferring the data collected into popular engineering CAD systems.
Penguin Automated Systems Inc. (ASI) is a leading research, development and prototyping company providing professional and comprehensive robotic and automation solutions for underground, underwater, in-space and on-surface
applications. Daily operations focus on expanding and inventing new technologies in order to provide its clients with the most advanced and impressive products on the market. The combination of Penguins expert knowledge and skilled resources can
buyers benefit
As a mining industry end-user, broker, agent, or distributor, CAMESE will help you discover the broad range of goods and services offered to the mining industry by our member firms. You can broadcast your message or your requirement to our more than 250 members via our members only business opportunity service. There is no charge for this service, but you must be a registered user of the website to access this feature. Once you submit a business opportunity, it will be reviewed, and you will be contacted within two to three Canadian business days. If your query is approved, you will be notified when it is released to the members. For more information, contact Spencer ramshaw, Director Information and Communications, at ramshaw@camese.org.
www.camese.org
27
28
www.camese.org
Buildings, Portable
Design Shelter specializes in the supply of fieldready portable base camp solutions designed specifically for demanding environments. Also available are quality pOrTAbLE HEATInG AnD COOLInG EQuIpMEnT. To find out more, call 1-604-921-8805 or email info@designshelter.com.
Design Shelter Inc. is a manufacturer of turnkey base camp building facilities and support systems that are ideal for housing of mineral exploration personnel and or
www.camese.org
29
Buildings, Portable
l megadome nL
in conjunction with a woven 12-oz. high-density polyethylene PowerShield coated material, MegaDome buildings provide a superior environment to protect equipment, materials and workers from the weather. The strength of its double-arch trusses set MegaDome apart from its competition. MegaDome ships its buildings by road or sea from its manufacturing and distribution centre near Montral, Qubec, usually within six weeks from order date. Manufacturer technicians and full crews are available to ensure quick and correct installation.
Options
hoice of Foundation C (concrete wall, concrete blocks, piers, etc.) Insulation Ventilation ot Dipped and Stainless Steel Components H for Highly Corrosive Environments ndustrial Overhead Doors I iesel or Propane-Powered D Hot Air Heating units available Roll Up Sides Industrial Lighting ire-Retardant Fabric F Side Doors prinkler System Ready S
MegaDomeNL supplies engineerdesigned, industrial membranecovered , obstruction-free galvanized steel buildings built to Canadian Building Code standards that meet or exceed the requirements of most countries. MegaDome buildings are available in widths from 30 ft. to 125 ft. and up to 1000 ft. long MegaDome buildings are used by many industries but have been particularly popular in the mining industry. Their durability in harsh conditions, ease in shipping to remote locations, cost-effectiveness and quick installation are some of the reasons. Using galvanized steel trusses
Contact: Harry Hutchings, Marketing & Sales Address: 509 Marine Drive St. Johns, Newfoundland A1K 3E5, Canada Phone: 1-709-765-8999 Fax: 1-709-753-1317 Email: hhutchings@MegaDomeNL.com Website: www.MegaDomeNL.com
30
www.camese.org
Buildings, Portable
l weatherhaven
Weatherhaven of Burnaby, B.C., is a world leader as a designer, manufacturer, transporter and installer of rugged, portable, fabriccovered structures, which are ideal for personnel in mineral exploration and mining. Applications for these shelters include sleeping quarters, offices, recreation facilities, wash houses, kitchen/dining facilities, warehouses and shops. Weatherhavens design commitment to low shipping weight and volume (per unit of erected space) achieves unparalleled portability while maintaining a high-performance product for even the most inclement conditions. The shelters can be packaged, transported and relocated with minimal effort, maximum efficiency and reduced costs. Weatherhaven also offers full turnkey camp accommodation solutions, which may include electrical, mechanical, water and waste systems. Whether the need is for one structure or a full turnkey camp, Weatherhaven can deliver a safe and comfortable shelter system.
Contact: Mike Ball Address: 8355 Riverbend Court Burnaby, British Columbia V3N 5E7, Canada Phone: 1-604-451-8900, ext. 311 Fax: 1-604-451-8999 Email: info@weatherhaven.com Website: www.weatherhaven.com
What is Camese?
Founded in 1981, the Canadian Association of Mining Equipment and Services for Export (CAMESE) is the national voice of Canadas mining equipment and service exporters. As is evident from this Compendium, the associations more than 250 corporate members across the country supply most of the products and services required for successful mining.
Camese is a cost-effective source of information and activities for its members through the following services:
i advocacy of the mining supply sector to the Canadian public and governments. i CAMESE-led participation with booths and/ or posters in international mining exhibitions. i networking with other firms and marketing to the mining sector. i internet exposure in English, Spanish and French and Russian on the associations comprehensive website at
www.camese.org. Camese provides foreign brokers, agents, distributors and end-users with reliable sources of all types of goods and services used in the mining industry. make your inquiries to Camese at: phone: 1-905-513-0046 fax: 1-905-513-1834 or email: ramshaw@camese.org those interested in further information about the benefits of membership in Camese are invited to contact:
i Exposure in this annual Compendium of Canadian mining suppliers that is printed in 20,000 copies and distributed worldwide. i Prompt, organized key information about market conditions, trade shows, trade missions, marketing tips and association news through CAMESEs Electronic Bulletin. Export sales opportunities are relayed to members through CAMESEs website-based MinBOS Mining Business Opportunities System. i advice and analysis on mining markets worldwide. i seminars, workshops and advice on how to effectively use trade shows, missions, publications, advertising brochures, public relations, direct mail, Internet and other marketing tools for successful selling to the international mining sector.
Bruce Miller, Director Member Services, CAMESE, Suite 101, 345 Renfrew Drive, Markham, Ontario, L3R 9S9, Canada Phone: 1-905-513-0046, ext. 301 Fax: 1-905-513-1834 Email: minesupply@camese.org Website: www.camese.org
www.camese.org
31
A worker examines ore being transferred on a conveyor at Goldcorps Dome Mill, Timmins, Ontario
l B.i.d. Ltd.
B.I.D. Ltd., established in 1981, designs, manufactures, installs and maintains custom bulk material handling equipment for all industries. Working with your consultant or directly with you, B.I.D. supplies individual pieces of equipment or complete systems for mining, cement, steel, utilities, co-gen, manufacturing, ports, as well as pulp and paper industries. B.I.D. has an enviable reputation for getting the job done on schedule, on budget, and to the complete satisfaction of its customer. If problems arise, B.I.D. is there with you to find the solution. It has the experience, engineering and the manufacturing abilities to respond quickly. B.I.D.s engineering and fabrication facility is located in Woodstock, New Brunswick, Canada, at the intersection of the Trans Canada Highway and the U.S. Interstate 95. This location, close to several major Atlantic container and breakbulk marine terminals, provides efficient access to customers in North America and around the world.
Contact: Derek Lawrence, PTech Estimating and Business Development Address: 171 Hemlock Street TCH Exit 191, P.O. Box 9054 Woodstock, New Brunswick E7M 6B5, Canada Phone: 1-506-328-4381, ext. 510 Fax: 1-506-328-3430 Email: dlawrence@bidcanadaltd.com Website: www.bidcanadaltd.com
32
www.camese.org
MrH boom System for hard rock and large coverage applications.
Breaker Technology, Ltd. (BTI) is a leading manufacturer and distributor of a wide range of mining, quarry, construction and demolition equipment. Located in Thornbury, Ontario, the company specializes in hydraulic breakers, mobile rockbreakers and stationary rockbreaker systems for breaking oversized rocks at primary crushers, grizzlies, drawpoints and stopes. BTI also produces a full line of rugged, low profile, underground utility vehicles including mobile scalers,
www.camese.org
33
Canadian Wear Technologies Your chrome white iron specialists provide wear solutions for oil sands and hard-rock mining. Serving the mining industry since 1985, Canadian Wear Technologies offers a range of products covering basic to advanced wear protection. The Abreco Wear System has been proven to significantly increase production uptime in primary crushing circuits in hard-rock mining. Products include AbrecoPlate, AbrecoPipe , Ultra Wear Chromium-Carbide Overlay Plate & Pipe, Hardox AR Plate, UHMW Polyethylene, Ceramic liners and castings in a variety of alloys. Services include custom and co-design,
See Country Interests Section for Latin America and the Caribbean, and North America.
Contact: Keith Holbrook, President Address: 675 Brook Road North Cobourg, Ontario K9A 4J8, Canada Phone: 1-905-373-9327, ext. 308 Fax: 1-905-373-4172 Email: info@canadianweartech.com Website: www.canadianweartech.com
34
www.camese.org
www.camese.org
35
SCOPE OF SERVICES
aterial Handling Equipment M Design and Engineering ulk Material Storage Systems B Bulk Bin and Additive Systems Structural/Civil Design and Engineering etail Design and Equipment Specifications D for new and retrofit Installations Feasibility Studies System Audit/Evaluation Capital Cost Estimates Construction Supervision Start-up and Commissioning Update of Existing Plant Documentation Site Plans
Contact: Steve Cook, Sales Manager Address: 235010 Wrangler Road Rocky View (Calgary), Alberta T1X 0K3, Canada Phone: 1-403-279-3555 Toll Free: 1-888-349-LUFF (5833) Fax: 1-403-279-5709 Email: steve@luffindustries.com Website: www.luffindustries.com
36
www.camese.org
As a result of the mining industrys innovation and investment activities, Canada has benefited from low-cost mineral and metal products, product innovations, good jobs, greater wealth and responsible stewardship of natural resources.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
37
www.camese.org
38
www.camese.org
Winsted Group Inc. is the manufacturer of PROVIX camera systems for heavy equipment or any mining application. Winsted manufactures remote wireless submersible camera systems for underground and carries a variety of IP cameras for network compatibility. Winsteds diverse
The Canadian mining industry continues to be an economic backbone of Canadas regional and rural economies, creating jobs and economic growth in more than 115 communities across Canada.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
39
40
www.camese.org
A lab technician loads samples into a spectrometer for analysis at IAMGOLDs, Niobec Niobium Mine, Saguenay Region, Qubec.
www.camese.org
41
l BBa
BBA is an independent Canadian consulting engineering firm delivering high-end services around the globe. From project definition to commissioning, BBA offers a complete range of multidisciplinary and integrated engineering services including conceptual and feasibility studies, NI 43-101 technical reports, and customized project management (conventional, EPCM, turnkey, and other modes). BBAs specific expertise includes mine planning and design, plant design and simulation, tailing dam safety inspection, commissioning assistance, process optimization and control. With more than 450 employees, four offices across Canada, and a diversified portfolio of successful projects, BBA stands out by its high-level expertise in the energy and mining sectors.
Contact: Colin Hardie Department Manager Mining & Metals Address: Suite 2500 630 boulevard Ren-Lvesque West Montral, Qubec H3B 1S6, Canada Phone: 1-514-866-2111, ext. 5400 Fax: 1-514-866-2116 Email: colin.hardie@bba.ca Website: www.bba.ca
www.camese.org
42
Camese Compendium of Canadian Mining Suppliers www.camese.org
Canadian firms are responsible for the largest share of exploration spending in Canada, the United States, Latin America, Central America, Europe and, most recently, Africa.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
43
l norWest Corporation
Norwest Corporation is an international employee-owned energy, mining and environmental consulting company. Over the past 30 years, Norwest has grown to offer a wide range of services to the energy, minerals and natural resource industries. These include geological, engineering and consulting for the evaluation and development of coal, coalbed methane, oil sands, oil shale, industrial minerals and base and precious metals projects. In the environmental arena, Norwest brings an integrated approach to environmental assessment and regulatory support, environmental planning and management, water resources and climate change. Norwests geoscience and geotechnical engineering expertise comes into play from initial feasibility study through operational monitoring and finally reclamation and environmental remediation. Ultimately, Norwests extensive experience in management, operations, planning, analysis, marketing and government relations enables its experts and consultants to provide a full range of due diligence services, including bankable feasibility studies.
SErviCES:
resource evaluations Geology & Hydrogeology Geostatistics reservoir engineering simulations enhanced oil recovery improved oil recovery mine engineering Geotechnical engineering Contaminant remediation data management environmental management reclamation project management Field services processing engineering &design Financial evaluations Co2 sequestration
Combining repair, capital and exploration spending figures generates an estimated total amount of $16.2 billion in Canadian mineral development investment in 2009.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
Snowden Mining Industry Consultants Inc. is uncompromising in its delivery of highest quality services to the mining and related industries. During the past 22 years, Snowdens network of more than 200 experienced consulting geologists, engineers and support staff, in offices from Australia, Africa, Europe, to the Americas, has
Employment estimates for the Minerals and Metals industry show a need to hire 10,000 new workers per year for the next decade to satisfy replacement needs and fill new positions this suggests that roughly one out of every two present employees will have to be replaced over the next decade.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
45
As an important employer of Aboriginal Canadians, the mining industry has signed agreements with the Assembly of First Nations in recent years to further cooperation on policy initiatives. At the company level, impact benefit agreements (iBAs) can facilitate progress on extractive and exploration projects while providing investment in Aboriginal education, training and jobs. There are an estimated 120 such agreements in place relating to mineral projects. Aboriginal communities can play a role in helping industry meet the broader human resources challenge of hiring an estimated 10,000 new workers per year over the coming decade to meet business demand and replace retiring workers.
Source: Facts & Figures 2010/The Mining Association of Canada
46
www.camese.org
MineWrap removable insulation Blankets For your Engine and Exhaust Components
www.camese.org
47
48
www.camese.org
The worlds toughest doors for above and below ground mines.
R-
Richards-Wilcox Custom Systems, established since 1912, is the oldest and largest cranes and custom-door manufacturer in Canada. As a division of Wilcox Door Service Inc., this Canadian-owned company prides itself on providing innovative and reliable products and services designed for the extreme harsh conditions and high demands of the mining industry. Richards-Wilcox Custom Systems Inc. designs, engineers, manufactures and
installs cranes and custom-door systems based on ISO 9001 standards required by the companys Quality Control Program. The company produces products that are durable, dependable and built to last. Many units, not surprisingly, are still safe and have been fully operational for more than 80 years. R-Ws professional engineers, technologists, electricians, and CWB-certified welders provide you with their commitment to deliver
www.camese.org
49
Wallbridge Mining Companys drilling on Windy Lake in the Sudbury Basin, Ontario.
www.camese.org
51
l Canun internationaL
Canadian-owned Canun International of Val Caron (Sudbury), Ontario, designs and manufactures pneumatic rock drills for the mining, quarrying (granite) and construction industries. Products include Canun Airleg Drills, Stoper Drills, Sinkers, Quarry Drills, Canun Service Parts and the Canun Canpush Screen Pusher. Canun products are manufactured in Canada on modern CNC equipment, which performs all milling, turning and drilling operations. Super-precision grinding provides the high-tolerance finishes and accurate fits that are so critical for todays mining machines. Dimensional inspection ensures consistency and interchangeability of every part produced. Canun is continually applying new or emerging technology to develop and strengthen its ability to meet market needs. Canun International is ISO 9001:2000 registered.
Contact: Alan French, President Address: 2896 Belisle Drive Val Caron, Ontario, P3N 1B3 Canada Phone: 1-905-634-9634 Fax: 1-905-634-7229 Email: canun@sympatico.ca Website: www.canun.com
The clean energy and environmental technologies of today and tomorrow use metals and minerals as fundamental building blocks. Water purification systems, for example, rely on nickel and a host of rare earth elements. Hybrid vehicles draw energy from nickel hydride batteries. Catalytic converters require cerium and palladium. Cleaner energy sources, whether nuclear, solar, wind or hydrogen, all use a range of minerals and metals in their equipment and processes. Efficient lightweight vehicles and aircraft require aluminum and emerging, still lighter composites and alloys involving nickel and other metals.
Source: Facts & Figures 2010/The Mining Association of Canada
52
www.camese.org
Mining activities have never been environmentally benign. The process of extracting ore from rock poses many technical challenges. Similarly, the process of turning raw concentrate into a pure metal also poses challenges, many of which have environmental considerations.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
53
l dimateC inC.
Dimatec Inc., since the companys formation in 1988, has specialized in the manufacturing of impregnated and surface-set core bits as well as other related down the hole products that are primarily used by the mineral exploration and geotechnical industries. To manufacture products that withstand the most arduous drilling conditions, Dimatec uses only the highest quality raw materials and state-ofthe-art processing technology. Dimatecs goal is to meet and exceed their customers requirements for high performance in-hole drilling equipment. This goal is achieved through an experienced work force, an ongoing commitment to research and development and the implementation of an ISO 9001:2008 quality management system. Dimatecs quality objective, through continuous improvement and product development, is to maintain their position as the recognized standard of quality, value and service. This quality commitment is reflected in the acceptance and use of their products worldwide.
Contact: Blayne Farebrother, Pat Chamberlin Technical Sales & Marketing Address: 180 Cree Crescent Winnipeg, Manitoba R3J 3W1, Canada Phone: 1-204-832-2828 Toll Free: 1-866-202-5875 Fax: 1-204-832-4268 Email: info@dimatec.com Website: www.dimatec.com
54
www.camese.org
l Festo inC.
Festo is a leading global manufacturer of pneumatic and electromechanical components and controls for industrial and process automation, with 57 independent national companies serving more than 176 countries. For more than 80 years, Festo has continuously elevated the state of manufacturing with innovations and optimized motion control solutions that deliver higher performance and more profitable automated manufacturing and processing equipment. Festos dedication to the advancement of automation extends beyond technology to the education of current and future automation and robotics designers with simulation tools, teaching programs, and on-site services. With a comprehensive line of more than 25,000 automation components, Festo is capable of solving the most complex automation requirements. Festos experienced specialists provide complete support at every stage of your development process, including conceptualization, analysis, engineering, design, assembly, documentation, validation, and production. To find out how Festo can serve your specific needs, call today.
Contact: John Wilson Address: 5300 Explorer Drive Mississauga, Ontario L4W 5G4, Canada Phone: 1-877-GOFESTO Fax: 1-877-FXFESTO Email: john.wilson@ca.festo.com Website: www.festo.ca
Average weekly earnings for a mining industry worker in 2009 were $1,350 a figure that is 58%, 47%, 30% and 29% higher than that of workers in the forestry, manufacturing, finance and construction sectors, respectively.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
55
l Foremost
modifications, the Foremost Rotary Deck Bushing provides stabilization, reduces drill vibrations and friction to drill string components and permits higher operating speed. Foremost offers a proven successful track record to suit customers requirements.
Foremost designs and manufactures a diverse line of heavy equipment, tooling, consumables and accessories for a variety of applications worldwide. For the mining/mineral exploration sector, Foremost specializes in drilling rigs, reverse circulation drill pipe, semi-automatic, rig-mounted pipe handlers and drilling consumables. These products generate significant cost savings, reduce maintenance requirements, and improve drilling productivity and equipment life. The Foremost Exploration Series of drilling rigs,
either tracked or wheeled, and support vehicles, are designed to minimize ground pressure and to climb extremely steep grades and side slopes. Foremost Floating Cushion Subs and Shock Subs protect and prolong top drive bearings, rotary drive, mast assemblies and gear life against both torsional and axial vibrations/shock loading in moderate and extreme drilling conditions, while enabling make up and break out of threaded connections. Replacing a friction or non-rotating bushing on the deck of a blast-hole drill without drill
56
www.camese.org
www.camese.org
www.camese.org
57
Mincon Mining Equipment Inc. a wholly owned subsidiary of Mincon International Ltd. has been operating in Canada since 1989 as a major manufacturer of rock drills, both pneumatic and hydraulic, and supplier of high-quality replacement parts for Tamrock, Atlas Copco, and Secoma drills. Mincon provides complete drill and feed packages for all types of jumbo and long hole drilling rigs.
58
www.camese.org
Multi-Power Products Ltd. is Canadas most versatile manufacturer of turnkey drill rig systems, components and ancillary equipment with a present product offering that ranges from Heli-portable Pioneer auger and Discovery core drills to its large Explorer reverse circulation track systems. Multi-Powers ancillary equipment list ranges from pressure/ supply pumps, foot clamps and chucks to Heli-portable air/ booster compressors, cyclones and drill heads. While primarily catering to the mineral exploration market, MultiPower has expanded its product range to service the geotechnical, geothermal, geophysical/seismic and deep foundation industries. Aided by sophisticated 3-D
www.camese.org
59
Until the global economic recession took hold in late 2008, the Canadian economy had experienced a decade-plus of strong growth, low inflation and low interest rates, with gross domestic product (GDP) growing at around 3% annually. The economy passed the trillion-dollar threshold in 2003 and reached $1.29 trillion in 2009. Over the past 20 years, the value of minerals and metals to Canadas economy has remained in the range of 3.0% to 4.5% of the countrys GDP.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
www.camese.org
61
Snowden Mining Industry Consultants Inc. is uncompromising in its delivery of the highest quality services and technical training to the mining and related industries. For more than 22 years, Snowdens specialists have provided technical training and mentoring to participants around the world. Its programs focus on two priorities:
62
www.camese.org
l i-Gard Corp.
More options for your Electrical Safety! I-GARD provides most advanced solutions in Ground Fault Protection and Arc Flash Mitigation for underground or above the ground operations.
The DSP System ensures Continuity of your Critical Process The SIGMA provides Continuous Monitoring of Neutral Path Integrity The GCHK-100 provides Protection for Mobile Equipment
We invite you to challenge our global sales and technical team with your most complex power protection problems. Visit us at www.i-gard.com
7615 Kimbel Street, Unit 1 Mississauga, Ontario, Canada L5S 1A8 Toll Free Phone Fax 1.888.737.4787 905.673.1553 905.673.8472
I-Gard Corp. is an acknowledged and award-winning leader in the field of electrical safety. With more than 25 years of experience, I-GARD is a developer and manufacturer of many unique patented solutions designed to service the special needs of the mining industry and improve the safety of personnel and equipment in underground or above-ground operations. Most electrical faults, estimated to be more than 90%, are, or begin as, ground faults. The safety of your personnel and the reliability of your equipment are highly dependent on the type of system grounding selected, the type of ground-fault protection selected and the method of protection against ArcFlash hazards. The cost of arcing faults can go up to $30 million for equipment loss, production downtime and personal liability. I-GARDs unique patented technology offers complete protection while ensuring the continuity of your operation and saving you significant costs related to ground faults and ArcFlash hazards. For more information, please visit www.i-gard.com.
Contact: Alberto Quiroz Vice President International Sales Address: Unit 1 7615 Kimbel Street Mississauga, Ontario L5S 1A8, Canada
Phone: 1-905-673-1553 Toll Free: 1-800-RESISTR (737-4787) Fax: 1-905-673-8472 Email: aquiroz@i-gard.com Website: www.i-gard.com
www.camese.org
63
See Country Interests Section for Asia-Pacific, Latin America and the Caribbean, Middle East and North Africa, North America, SubSaharan Africa and Worldwide.
Contact: Mohammed Alwazani Address: Suite 1, 889 Pantera Drive Mississauga, Ontario, L4W 2R9, Canada Phone: 1-905-602-9291, ext. 1 Fax: 1-905-602-9296 Email: malwazani@arkbro.com Website: www.arkbro.com
MANUFACTURE MANUFACTURES
INC.
64
www.camese.org
Mine Cable Services Corp. (MCS) is a designer and manufacturer of highvoltage cable connection systems. MCS manufactures a full range of mine cable couplers from 600 V through 8 kV, 15 kV and 25 kV. They are able to interconnect with couplers from all Canadian and U.S. manufacturers. MCS junction boxes and cable posiclamp systems have been designed to meet the rigours of mine site environments. The MCS portable cable vulcanizing system has automatic temperature control that, together with Teflon-coated cable molds, produces a flexible, waterproof cable repair. Tapes
North American Distributor for Prysmian Mining Cable Distributor for Raychem Custom Cable Terminations Distributor for Thermoweld Conductor Welding Products Distributor for CAB Hooks, Hangers, Cable Supports and Safety Products
A cleaner society, and particularly Canadas ability to make progress over the coming decade, will depend upon the availability of metals and minerals as building blocks. In this sense, environmental groups calling for clean technologies should similarly be advocating for the minerals and metals developments that underlie these technologies.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
65
l varisystems Corp.
VariSystems cables are the Secret Weapon used by NATO and the petroleum industry to assure utmost reliability for mission-critical cable connections. Now used by the mining industry with tremendous success, VariSystems cables are impervious to water, fuel and most solvents plus they offer increased abrasion resistance, tensile strength, crush resistance and superior flexibility especially in extreme weather conditions. VariSystems over-molded assemblies have been proven to outlast standard cable assemblies on Komatsu, Cat, Kress Truck, Dozers and various types of mine-drill units. For on-board computers, GPS, antenna, light harnesses, communication, control and warning systems, VariSystems manufactures custom assemblies. Stop using homemade, soldered and taped together cables to keep your electronic equipment running! Call VariSystems to see a demonstration of its ruggedized solutions and have one designed to eliminate down time for your most demanding projects. Mention promo CAM010 to receive 10% off your first order.
Contact: Gonzalo Quinteros Account Executive Address: 5304 Hubalta Road S.E Calgary, Alberta T2B 1T6, Canada Phone: 1-403-569-5270 Fax: 1-403-273-1073 Email: gquinteros@varisystems.com Website: www.varisystems.com
66
www.camese.org
CAmESEs People
Left to Right:
Bruce Miller, Director Member Services, is a business executive with extensive experience in marketing and sales, engineering, finance and operations management. Bruces goal is to ensure that members achieve maximum benefit from the services and activities offered by CAMESE as well as help them provide profiles for their member web pages. Barb Fletcher, Office Assistant, is responsible for helping with all administrative tasks including computer data entry, mailing duties, as well as preparing order confirmations and promotional packages for the CAMESE website and the Compendium. Dolores Wharton, Project Coordinator, looks after trade show logistics, ensuring that all arrangements are taken care of and deadlines met so that exhibitors have the best possible experiences. Fluent in Spanish, she also assists Maurice at selected trade shows through the year. Maurice Bichsel, Director International Market Development, manages CAMESEs trade shows, missions and similar projects. He has more than 25 years of experience in technical sales, marketing, product application, development projects and field customer services. Through the course of his career, Maurice has gained extensive experience in an international environment. Frequent travel abroad has also helped him develop the ability to adapt to changing working conditions and cultures spontaneously. Maurice speaks English, French, Spanish and German.
Linda Collins, Office Manager, has been with CAMESE since 1987. Prior to that date, she worked for a variety of mining supply companies. Well-known to members, Linda is responsible for all the day-to-day administration of the association. Bonnie Toews, Managing Editor of CAMESEs annual Compendium and website content, is a former trade journalist and editorial director of 30 trade publications. She uses her publishing background to ensure members information is continually updated, professionally presented and delivered on time. Spencer Ramshaw, Director Information and Communication, assists CAMESE in reaching its goals to increase the associations public profile and services to members within all mining subsectors by managing computer systems/ databases, analyzing, coordinating publication production, communicating and advising on policy. Via special reports, Spencer enables CAMESEs leadership role in gaining government support for members promotions, operations and trading activities outside of Canada. Jon Baird, Managing Director, is responsible for CAMESEs administration, member services and government relations. He has more than 28 years of experience in international marketing to the mining industry and speaks English, French, Spanish, German and Swiss-German. In the course of his business career, he has visited 71 countries.
www.camese.org
67
Expertise:
Project Management Global Procurement Mine Infrastructure Roads Power Plants Comminution Materials Handling Mineral Processing Concentrating Roasting Smelting Leaching Solvent Extraction Electrowinning Electrorefining Precious Metal Recovery Base Metal Recovery Pressure Oxidization Bio-Oxidization Cyanidation Cyanide Recovery/ Destruction Potash Processing Iron Ore Beneficiation Industrial Minerals Processing Geotechnical Engineering Tailings Acid Plants Environmental Studies Mine Closure & Reclamation
pResidenT
allan French, president
Canun International
www.canun.com
Mine Radio Systems (MRS) Inc. seCond viCe pResidenT Hepburn Engineering Inc.
www.hepeng.com
TReasuReR
Fordia Group
www.fordia.com
MacLean Engineering
pasT pResidenT
www.wgm.ca
diReCToRs
www.macleanengineering.com
Bull Powertrain
www.bullind.com
68
www.camese.org
Calciner removing water and organics from scrap materials by burning it at high temperatures in a rotary kiln 10 ft. wide by 50 ft. in length. The gases produced go to a secondary combusting chamber to burn off any contaminants. Xstratas Calciner Plant, Sudbury.
www.camese.org
69
BIODISK Big John and Little John Portable Wastewater Treatment Plants
www.camese.org
l iC ControLs
IC Controls is a manufacturer of quality water analysis equipment with a reputation for pH sensors that perform well in mines, mills, metallurgical refineries and their waste water facilities. For more than 30 years, IC Controls has worked extensively in the mining and metal refining industry to develop quality pH sensors that are known for their long life and quality performance in floatation tanks, conditioner tanks, gutters, sluiceways, effluent streams and ponds. IC Controls Model 642 is its tried, tested and proven product that continues to be the companys best seller around the world. With a strong customer base in Canada, IC Controls reputation has grown throughout the world since 1990. Its product line has evolved to offer analyzers and configurable sensors in the areas of pH, conductivity, ORP, dissolved oxygen, chlorine, and boiler water analysis for all industrial applications. Give IC Controls a call. It takes pride in providing you with durable products, trouble-free performance, quick delivery, and technical support before and after the sale.
Contact: Rosalie Fitzpatrick Address: 29 Centennial Road Orangeville, Ontario L9W 1R1, Canada Phone: 1-519-941-8161 Fax: 1-519-941-8164 Email: sales@iccontrols.com Website: www.iccontrols.com
www.camese.org
71
CAmESEs website presents the latest member data by the following mining supply subsectors:
analytical Laboratories and supplies asset Liquidation Consultants associations automation and Communications blasting equipment and services buildings, portable bulk material Handling equipment, systems and engineering services Camera systems, mobile Camp management services and supplies Closure, reclamation and remediation Compressors, air Consulting Geologists and engineers Corporate social responsibility diesel engines and accessories domestic and international packaging services doors drilling Contract services drilling equipment and supplies education and training electric power equipment engineering Contractors environmental equipment and services equipment maintenance and repair exhaust emission Control exploration supplies finance Consultants and services fuel transportation and storage equipment Geophysical instrumentation Geophysical surveys and Consulting Geotechnical instrumentation Government relations/ international development Ground Control equipment and supplies Hoisting equipment and accessories Hydraulic Components and accessories information and marketing services insurance Consultants and services Legal Consultants and services Liquid Heating Lubricants management Consulting services mapping services mine site Construction mineral processing pumps, pipes and valves mineral processing equipment and supplies mineral processing services mining engineering and Contracting mining instrumentation process Chemicals and minerals radio frequency identification risk management Consultants and services safety and Health security intelligence and personnel services smelting and refining equipment and services software surface mobile equipment and Components trade Consultants transportation and Logistics service providers transportation equipment, accessories and services underground vehicles, equipment and Components ventilation equipment and Components Water treatment equipment and services
www.camese.org
www.camese.org
72
Mechanic doing battery checks on the truck fleet at North American Palladiums Lac des Isles Mine, 85 km. north of Thunder Bay, Ontario.
www.camese.org
73
74
www.camese.org
12' X 40' hazardous waste treatment kiln supplied to a major U.S. Pharmaceutical company
World Wide Kiln Services: Kiln and rotary equipment operators have engaged World Wide Kiln Services (WWKS) to design, engineer, fabricate, install, and maintain their systems since 1991. Specific services include tire and trunnion resurfacing, kiln refurbishment and alignment, drive-component specification,
Contact: Alan Ingram Address: Suite 6, 919 Fraser Drive Burlington, Ontario, L7L 4X8, Canada Phone: 1-905-332-5577 Toll Free: 1-877-321-4553 Fax: 1-905-332-0441 Email: alan@worldwidekiln.com Website: www.worldwidekiln.com
Canada ranks first globally in production of potash and uranium; second in nickel and cobalt; third in titanium, aluminum and platinum-group metals; and fifth in diamonds, asbestos, zinc, molybdenum and salt. Although value declined significantly in 2009, Canada held its position as a leading mineral-producing nation with production value estimated at $32.2 billion.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
75
76
www.camese.org
Located in markham, Ontario, the Canadian Association of mining Equipment and Services for Export (CAmESE) is a trade association existing to support Canadian firms to export to the worldwide mining industry and to assist foreign buyers to find mining supplier sources in Canada.
www.camese.org
Camese Compendium of Canadian Mining Suppliers www.camese.org
77
Workers with Superior Diamonds Inc. conduct a geophysical survey in the Ville Marie area, Qubec.
positions, a large selection of time bases, controlled linear or fast current ramps and a proven step-response transformation, all conductors can be detected, making Pulse EM the ultimate TDEM system.
Contact: Bill Ravenhurst Address: 2135 Meadowpine Blvd. Mississauga, Ontario, L5N 6L5, Canada Phone: 1-905-814-0100 Fax: 1-905-814-8617 Email: bravenhurst@cronegeophysics.com Website: www.cronegeophysics.com
www.camese.org
l GeoniCs Limited
Geonics Limited is the world leader in the research and development of electromagnetic (EM) geophysical instrumentation. Incorporated in 1962, Geonics has an established history in the production of reliable instrumentation for the resource industries. Using more than 35 years of experience in the design of time domain electromagnetic (TDEM) systems, Geonics has developed the versatile PROTEM TDEM System. The PROTEM Receiver is combined with any of five available transmitters to cover a full range of applications, from shallow environmental investigations to deep, threecomponent surface and downhole exploration for mineral and geothermal targets. Applications in resource exploration are further supported by the recent introduction of surface and downhole fluxgate magnetometer sensors. With Ground Conductivity Meters that can be operated from surface, in-mine or downhole, Geonics also addresses requirements for near-surface site characterization; common applications within the mining industry include the mapping of geologic structure, brine contamination, acid mine drainage and abandoned mineworks.
Contact: Simon Boniwell Marketing & Sales Manager Miro Bosnar, President Address: Suite 8 1745 Meyerside Drive Mississauga, Ontario L5T 1C6, Canada Phone: 1-905-670-9580 Fax: 1-905-670-9204 Email: geonics@geonics.com Website: www.geonics.com
www.camese.org
79
l ifG Corporation
IFG Corporation is Canadianowned and has been designing and manufacturing instrumentation for geophysics since 1979. IFG began the development of a new generation of borehole instrumentation in 1984. These new instruments take advantage of the dramatic improvements in semi-conductor technology, which includes reductions in both size and consumption of power. Concentrating primarily on small diameter borehole equipment (35- and 40-mm diameter), IFG has developed a wide range of borehole sensors to meet the needs of the mining, geotechnical and environmental industries. IFG is a full-service company that offers sales and leasing along with complete research and development service. This service can accommodate new requirements or integrate systems and probes from other manufacturers. Specification sheets, technical notes, advice and prices are available at your request.
Contact: Detlef Blohm, President Address: Unit 2 26 Bramsteele Road Brampton, Ontario, L6W 1B3, Canada Phone: 1-905-451-5228 Fax: 1-905-459-2877 Email: ifgcorp.blohmn@bellnet.ca Website: www.ifgcorp.com
Canada has a significant mineral-processing industry, with 33 nonferrous metal smelters and refineries operating in six provinces. Some of these facilities contain both a smelter and a refinery. In the past, Canadas integrated smelters and refineries typically accompanied development of a worldclass mine and were located inland without access to low-cost marine transport. As local ore reserves became depleted and production of base-metal concentrate declined, Canadas smelters and refineries moved from integrated production toward a more costly custom treatment of concentrates from other nations.
Source: Facts & Figures 2010/The Mining Association of Canada
80
www.camese.org
Camese participates in international mining events. see the services Cameses trade show team provides members on page 158.
www.camese.org
www.camese.org
81
82
www.camese.org
Abitibi Geophysics Inc. provides the highest quality geophysical data acquisition, processing and interpretation services to help its clients find precious and base metals, diamonds, uranium and other mineral resources. For more than 28 years, Abitibi has built an international reputation for innovative developments and competitively priced, top-quality products, delivered safely, and on time. Starting in 2010, Abitibi Geophysics will be offering borehole gravity surveys using the Scintrex Gravilog system. Recent EM developments to help explore deeper include a new time-domain electromagnetic system with penetration in excess of 1,000 metres, and an improved range of conductivity detection for poor conductors
www.camese.org
83
See Country Interests Section for Asia-Pacific, Australia, Latin America and the Caribbean, and Sub-Saharan Africa.
Contact: James D. Tod, MSc(Eng), P.Eng. Senior Engineer Address: Suite 6 1045 John Counter Blvd. Kingston, Ontario K7K 6C7, Canada Phone: 1-613-549-5223 Fax: 1-613-549-4120 Email: sales@mdt.ca Website: www.mdt.ca
l roCtest
Roctest designs, manufactures and markets sensors and high-precision measuring instruments for the civil engineering market and other applications. Roctest is recognized for its leading-edge technology, the quality of its technical expertise and its product-development capabilities for challenging and demanding environments. Roctest and its subsidiaries FISO Technologies, Telemac, and Smartec offer you an unparalleled range of customized solutions combining both traditional vibrating wire technology and state-ofthe-art fiber optics. For just a fraction of the total investment cost in new or aging infrastructure, Roctests sensors and measuring instruments reduce your risk of damage to infrastructure and the environment, excessive wear and tear in machinery, and even loss of life. Roctest has offices in North America and Europe and a wellestablished distribution network in more than 75 countries covering more than 100 countries around the world. Now home to the GEOMATION product line.
Contact: Francois Cordeau PDG/President & CEO Address: 665 Pine Avenue Saint-Lambert, Qubec, J4P 2P4, Canada Phone: 1-450-465-1113 Toll Free: 1-877-ROCTEST Fax: 1-450-465-1938 Email: info@roctest.com Website: www.roctest.com
www.camese.org
84
www.camese.org
you can source online for almost any product, service or technology used in mining and supplied by Camese members.
www.camese.org
Camese Compendium of Canadian Mining Suppliers www.camese.org
85
See Country Interests Section for Asia-Pacific, Australia, Latin America and the Caribbean, and Sub-Saharan Africa.
Contact: James D. Tod, MSc(Eng), P.Eng. Senior Engineer Address: Suite 6 1045 John Counter Blvd. Kingston, Ontario K7K 6C7, Canada Phone: 1-613-549-5223 Fax: 1-613-549-4120 Email: sales@mdt.ca Website: www.mdt.ca
scam alerts Vigilance is essential with any trade show offers. Be sure to read the fine print before signing solicitations from sources that you do not know. If you have information about a scam or have been a victim of one, please call CAMESE at 1-905-513-0046 so we can warn other member firms.
86
www.camese.org
their skills to design and implement efficient, functional solutions to meet their customers hoisting requirements. HEI has the engineering data and drawings for the mine hoist technology of Canadian Ingersoll Rand (CIR), Westinghouse Canada, F.H.&B. and Ottumwa and provides OEM parts and service, overhauls and upgrades for these hoists worldwide.
See Country Interests Section for Asia-Pacific, Latin America and the Caribbean, North America, SubSaharan Africa and Worldwide.
Contact: John Hepburn, President Address: 73 Six Point Road Toronto, Ontario M8Z 2X3, Canada Phone: 1-416-638-4425 Fax: 1-416-638-2070 Email: sales@hepeng.com Website: www.hepeng.com
effective engineering and service organization. With wide experience spanning structural, mechanical, hydraulic, electrical and control technology, Hepburn engineers use
www.camese.org
87
See Country Interests Section for Latin America and the Caribbean, and North America.
Contact: Rodney Pryde Address: Unit 25, 150 Milner Avenue Scarborough, Ontario, M1S 3R3, Canada Phone: 1-416-291-9821 Fax: 1-416-291-4343 Email: rotesco@rotesco.com Website: www.rotesco.com
The mining industry places a high priority on corporate social responsibility (CSR) issues in Canada and abroad, such as helping to pay for schools, roads, electrical grids, hospitals, clinics, community halls, and child health and nutrition programs. Global CSR initiatives are also housed within the UN, the World Bank, the OECD, the global commercial banks and many others. The Canadian government unveiled a CSR strategy in 2009, establishing an extractive sector counselor position among other components. MAC and the industry believe that this plan, if properly funded, provides an effective complement to the numerous industry measures and strategies already in existence.
Source: Facts & Figures 2010/The Mining Association of Canada
88
www.camese.org
l infomine
InfoMine provides comprehensive, fully searchable information on the global mineral exploration and mining industries via its global websites, www.InfoMine.com and www. MINING.com, and a suite of specialist websites at editions.InfoMine.com. With more than 350,000 unique visitors every month, InfoMine is the largest mining and mineral exploration portal in the world and a valuable resource for investors, geologists, engineers, financiers, managers, miners, prospectors, teachers, consultants and suppliers. Topics covered include news, investment, companies, properties, mine sites, mine costs, countries, commodities, suppliers, equipment, consultants, careers, professional development, maps, events, technology, software and publications. InfoMine is also the publisher of MINING.com magazine (see magazine.MINING.com), a unique online publication covering the world of mining and mineral exploration with a worldwide distribution of more than 60,000 copies.
Contact: Graham Baldwin Director of Business Development Address: Suite 640 580 Hornby Street Vancouver, British Columbia V6C 3B6, Canada Phone: 1-604-683-2037 Phone: 1-604-683-2037 Ext. 224 Fax: 1-604-681-4166 Email: info@infomine.com Email: gbaldwin@infomine.com Website 1: www.InfoMine.com Website 2: www.MINING.com
www.camese.org
89
Global InfoMine, a database analyst, reports that 3,223 Canadian goods and services firms provide technical, legal, financial, accounting, environmental and other expertise to the mining industry as of 2010.
Source: Facts & Figures 2010/The Mining Association of Canada
90
www.camese.org
Liquid Heating
l inproHeat industries Ltd.
Inproheat Industries designs and manufactures SubCom, a true directcontact liquid-heating system that excels at heating or evaporating mass quantities of difficult-to-heat liquids, such as corrosive heap leach raffinate, potash solution mining brine, dense iron ore slurry, and virtually any other type of non-combustible liquid. SubCom has been helping mines around the world save money and time, while reducing GHG emissions, since 1972. Thats more than 35 years of R&D experience that has resulted in a deep understanding of the mining sectors operational processes. Inproheat works consultatively with clients to ensure every SubCom system optimizes heat use throughout the mineral processing train. SubCom systems are typically 95% to 99% efficient, long-lasting (e.g. the first system from 1972 is still operating), and low maintenance. Visit Inproheats website for case studies and other technical info, and find out why SubCom is the best solution for heating or evaporating liquids in the mining industry.
Contact: Steve Panz, P.Eng., VP Energy Systems Address: 680 Raymur Avenue Vancouver, British Columbia V6A 2R1, Canada Phone: 1-604-254-0461 Toll Free: 1-888-684-6776 Fax: 1-604-254-6377 Email: spanz@inproheat.com Website 1: www.inproheat.com Website 2: www.subcom.ca
www.camese.org
your guide to Canadian mining technology on the internet
Camese Compendium of Canadian Mining Suppliers www.camese.org
91
Management discuss work on a rail line that will carry the concentrate for Apex Silver, Bolivia.
Praetorian Construction Management provides professional project construction management services for Canadas mining industry covering both open pit and underground operations. Praetorian serves as its clients frontline interface for the construction of new and existing mining facilities including prejob planning and feasibility studies. The companys construction management expertise encompasses the coordination of all aspects of engineering, mining and contracting associated with mining construction
projects. As an independent construction management company without ties to engineering and contracting firms, Praetorian provides clients with an unbiased approach to completing projects. This enables its team to recommend the most appropriate engineering firms and other contractors based solely on expertise and suitability for the project at hand. Praetorian takes pride in
overseeing projects that are executed safely and completed on schedule and within established budgets.
Contact: Greg Topinka, P.Eng. Technical Services Manager Address: Suite 200 17834-106A Avenue Edmonton, Alberta T5S 1V3, Canada Phone: 1-780-989-0289 Fax: 1-780-989-0290 Email: info@praetoriancm.com Website: www.praetoriancm.com
92
www.camese.org
l geotemps international
Geotemps International the industry experts you call when you need temporary, temp-to-hire, or direct placement staffing for mining, environmental, earth sciences, and beyond. They can fulfill all your staff requirements including laborers, professionals, clerical workers, and technical experts. As an occasional service or as your external HR department, Geotemps works for you to source the best candidates to fit your needs, so you can put the emphasis on the work, not on the workers. Geotemps International eliminates HR difficulties, hidden payroll costs, improper employee classifications, and accounting concerns. Discover the direct benefits of customized staffing services with Geotemps International.
Contact: Lena Hutzcal Address: 20th floor 1066 West Hastings Street Vancouver, British Columbia V6E 3X2, Canada Phone: 1-604-601-8230 Fax: 1-604-601-8234 Email: info@geotempsintl.com Website: www.geotempsintl.com
Mapping Services
l eagle mapping
Eagle Mapping delivers high-quality LiDAR data, digital mapping and imagery tailored to your unique needs. Eagle Mappings new Riegl VQ480 LiDAR sensor and new DiMAC Ultralight+ 60-mega-pixel digital camera system enables Eagle Mapping more options than ever before to offer turnkey mapping solutions for diverse industry sectors. Consultative specialists work closely with you, combining industry, technology and languages to answer your specific challenges. Do you need DEM, DTM, topography, orthophoto, satellite, LiDAR, aerial photos, fly-throughs, ground or subterranean surveys? Do you need volumes, drainage, contours or break lines for access corridors, development, exploration, environmental studies, investors or industrial operations? With Eagle Mappings high-quality deliverables,
Mapping Services
you can reference data, analyze projects in 3-D, visualize terrain and communicate your results to business partners and investors. Leverage worldwide capacity, capability and collaboration to create a competitive advantage. You choose, Eagle Mapping delivers.
Contact: Lloyd Hume, President Address: Suite 201 2071 Kingsway Avenue Port Coquitlam, British Columbia V3C 6N2, Canada Toll Free: 1-877-942-5551 Email: lhume@eaglemapping.com Website: www.eaglemapping.com
www.camese.org
93
A 25 m SuperCor Haul Load Arch built by Atlantic Industries Limited in Cardinal River, Alberta, Canada.
bridges, conveyor tunnels, retaining walls, underpasses and stream crossings with spans up to 25 m. Endorsed by engineers around the world, the companys commitment to product research and development has
94
www.camese.org
www.camese.org
95
Praetorian Construction Management provides professional project construction management services for Canadas mining industry covering both open pit and underground operations. Praetorian serves as its clients frontline interface for the construction of new and existing mining facilities including pre-job planning and feasibility studies. The companys construction management expertise encompasses the coordination of all aspects of engineering, mining and contracting associated with mining construction
projects. As an independent construction management company without ties to engineering and contracting firms, Praetorian provides clients with an unbiased approach to completing projects. This enables its team to recommend the most appropriate engineering firms and other contractors based solely on expertise and suitability for the project at hand. Praetorian takes pride in
overseeing projects that are executed safely and completed on schedule and within established budgets.
Contact: Greg Topinka, P.Eng. Technical Services Manager Address: Suite 200 17834-106A Avenue Edmonton, Alberta T5S 1V3, Canada Phone: 1-780-989-0289 Fax: 1-780-989-0290 Email: info@praetoriancm.com Website: www.praetoriancm.com
96
www.camese.org
Analytical Laboratories and Supplies Mineral Processing Pumps, Pipes and Valves
l dynapro equipment limited
DYNAPRO Equipment Limited is a leading industrial pump designer and manufacturer offering an extensive selection of slurry pumps, pump parts, and related products to its mining customers around the world. With its global distribution network, its own manufactured products, and its team of technical experts, DYNAPRO provides pumping solutions for the mining industry worldwide. In addition to manufacturing its own line of slurry pumps, DYNAPRO has established partnerships with Ruhrpumpen and Schlumberger REDA, enabling it to deliver an endless variety of process and slurry pumps for all applications. With more than 200 years of combined pumping experience, DYNAPRO offers professional systems engineering, consulting, training, and pump repair services. DYNAPRO continues to build on its success using its winning formula of an experienced staff, a broad array of products, and a strong commitment to customer service.
Contact: James Bell, President Address: Suite 10 598 Falconbridge Road Sudbury, Ontario P3A 5K6, Canada Phone: 1-705-524-6958 Fax: 1-705-524-9122 Email: jimbell@dynaproequipment.com Website: www.dynaproequipment.com
l teChnosuB inC.
pressure range TECHNOJET multistage pumps and stainless steel TECHNOJET VT-SS vertical turbine pumps provide some of the best pumping applications for mine dewatering and paper mill industries. Technosub is also the sole distributor across Canada for the famous Tsurumi Pumps providing the highest range of submersible pumps available. At its leading-edge, 40,000 sq.-ft. factory, Technosub not only can test pumps up to 800 hp and 4160 volts, its also uses a unique test to ensure its pumps will outlast any on the market. For systems that pump highly corrosive liquid, Technosub offers stainless steel alternatives. Discuss your specifications with Technosub for a customized pumping solution.
Contact: Eric Beaupre, Sales Manager Address: 1156, av. Lariviere Rouyn-Noranda, Qubec J9Y 1J7, Canada Phone: 1-819-797-3300 Toll Free: 1-866-797-3300 Fax: 1-819-797-3060 Email: beaupree@technosub.net Website: www.technosub.net
Founded in 1983, Technosub has grown to become Canadas benchmark for pumping solutions. Today, nearly 100 employees work for Technosub throughout seven locations across Canada. Technosub sells, rents, manufactures and repairs pumps and pump components. The companys two trademark lines the high
www.camese.org
www.camese.org
97
The mill interior at North American Palladiums, Lac des Isles Mine, 85 km. north of Thunder Bay, Ontario.
l ameriCan Biltrite
American Biltrite: For premium equipment protection in the toughest mining application insist on Dura-Shield abrasionresistant rubber from American Biltrite. The latest addition to the Dura-Shield family, Dura-Shield A+, is a premium-lining material that ensures surface protection against corrosion plus abrasion for machinery and equipment and is simply the most abrasion-resistant rubber in heavy-duty equipment in applications where abrasion resistance is critical: linings, skirting, pulley lagging, shaker screens and sandblast curtains. Dura-Shield is available in 40- and 60-durometer versions most with bonding layers. An adhesive line for cold-bonding rubber is also available.
Contact: Marie-Laurence Gagnier, Marketing Specialist Address: 200 Bank Street Sherbrooke, Qubec, J1H 4K3, Canada Toll Free: 1-888-275-7075 Fax Toll Free: 1-877-271-1751 Email: mgagnier@american-biltrite.com Website: www.american-biltrite.com
98
www.camese.org
The mining industry is, by some measures, the single most important customer for Canadas transportation system. Minerals and fabricated mineral products provide significant tonnage, particularly bulk commodities such as iron ore, coal, potash, and sulfur.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
99
100
www.camese.org
Contact: Phillip A. Cancilla Address: P.O. Box 340 Kirkland Lake, Ontario P2N 3J2, Canada Phone: 1-905-275-2906, ext. 22 Fax: 1-905-275-3357 Email: philc@heathandsherwood64.com Website: www.heathandsherwood64.com
www.camese.org
101
102
www.camese.org
industries limited
40% longer wear life when compared to traditional woven wire. DoubleWeave uses two side-by-side, lighter-gauge woven wires that wear longer and handle up to four times more impact than larger singlestrand wire.
Contact: Alain Charbonneau Technical Sales Manager, Mining Address: 225 North Montcalm Blvd. Candiac, Qubec, J5R 3L6, Canada Phone: 1-450-659-7681 Cell: 1-514-475-3415 Fax: 1-450-659-5570 Email: acharbonneau@majorwire.cc Website: www.majorwire.cc
Major Wire manufactures and distributes premium-quality screen media to mining operations. Major Wires high-performance screen media not only increases screen capacity and throughput, it also eliminates blinding, pegging and clogging while maximizing wear life and significantly reducing downtime. These innovative solutions include: 1) Flex-Mat 3 in modular and tensioned versions. Constructed of polyurethane
strips that bond independently vibrating wires, it provides up to 50% more screen capacity than woven wire and polyurethane panels and eliminates common problems for far better screening efficiency. Flex-Mat 3 Double-Wire utilizes two side-byside wires to provide the same benefits in higher impact applications or when larger opening sizes are required. 2) OptimumWire , the strongest woven wire in the industry, provides up to
stacking conveyors as well as recycling picking stations that suit an extensive range of industries including quarries, mining, aggregates, sand and gravel, road building, residential development, topsoil, compost, mulch, landscaping, construction and demolition, waste management and recycling. Since 1985, McCloskey International has stayed ahead of the competition on the foundation of listening to the customer.
Feedback from customers continues to motivate the McCloskey Engineering team to design and build equipment that exceed industry standards.
Contact: EUROPEAN OFFICE Ian Lough, Managing Director Address: 47 Moor Road Coalisland, Co. Tyrone Northern Ireland, BT714QB Phone: 01144-28-8774-0926 Fax: 01144-28-8774-7242 Email: sales@mccloskeyinternational.com Website: www.mccloskeyinternational.com
The high value and low volume characteristics of gold and precious metals are relevant to the air cargo industry. According to Transport Canadas Transportation in Canada report, Canada exported $40 billion worth of products by air in 2009, of which fully $9 billion was gold and precious metals; Canada imported $54 billion in products via air in 2009, of which $7.5 billion was gold and precious metals. The other important mining product shipped via air was base metals, where exports totaled $0.5 billion and imports $1 billion.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
103
We are big enough to handle your business. And small enough to appreciate your business.
North Bay Plastic Molders Ltd. is a custom and proprietary injection molder of low- and high-volume products. The company primarily manufactures thread protectors and drill-hole plugs used in mining and
www.camese.org
featuring information about more than 250 Canadian mining suppliers.
104
Camese Compendium of Canadian Mining Suppliers www.camese.org
l novaflex
handling hoses, backfill hoses, expansion joints, pump connectors, pinch valves, bellows and feed spout hoses for ball mills. Novaflexs tough, versatile alternative to inflexible, cumbersome steel tubing is the Slurry King material handling hose system. Not only does it absorb system vibration and save on wear, it is also cut on-site with no welding. It makes installation a snap with easy handling, quick-fastening and its reusable flange system. Many inner tube compounds are available to meet specific material handling needs as well as custom-end fittings, including caps, flanges and nipples, which can be integrally built into hoses to meet all connection needs. Also available are chemical and petrochemical suction and discharge hoses, along with dry-break couplings and a complete line of AAR-approved railway airbrake hoses and assemblies for mine rail cars. NovaFlex has the versatility needed to fill all your specialized orders quickly and affordably.
Contact: Sales Department Address: 119 Consumers Drive Whitby, Ontario, L1N 1C4, Canada Phone: 1-905-666-4970 Fax: 1-905-666-9388 Email: sales@novaflex.com Website: www.novaflex.com
3:34:28 PM
CM
MY
CY
CMY
l polyCorp ltd.
Polycorp is an ISO 9001 company that manufactures molded rubber mill linings, uncured sheeting and rail seal extrusions for mining and transportation. Polycorp has an impressive track record with qualityengineered products supplied since 1968. Conveniently located in the industrial heartland of southern Ontario, Polycorp services the mining industry with compound formulations, CAD design and a global sales network. With Polycorps unique product mix, you can expect custom solutions for all your rubber needs and mill liner requirements.
Contact: Pramod Kumar Director Mining Division Address: 33 York Street Elora, Ontario N0B 1S0, Canada Phone: 1-519-846-2075, ext. 245 Toll Free: 1-800-265-2710 Fax: 1-519-846-2372 Email: pkumar@poly-corp.com Website: www.poly-corp.com
www.camese.org
105
P. R. Engineering Limited manufactures the Birdsboro Buchanan line of jaw crusher. These crushers are so reliably built that some have even outlasted the plant from which
l preCisioneering ltd.
Precisioneering Ltd. designs and manufactures corrosion-resistant, engineered fibreglass equipment. Standard products include fibreglass pollution-control scrubbers, ventilation systems (fans, ducting and stacks), tanks, brine makers, grating, platforms, walkways and ladders. Customers continually challenge Precisioneering with their most difficult process-engineering problems because they have learned that Precisioneerings results are innovative, cost-effective and longlasting. They also find the company to be flexible, responsive, and highly reliable in meeting deadlines. Precisioneering has successfully supplied the mining industry in North America since 1964. On staff, the companys five engineers have more than 100 years of combined engineering experience in the mining industry. A dedicated quality control manager maintains tightly controlled, documented, quality systems, while a stable, long-term workforce ensures high-quality fabrication. Precisioneering is now part of Group DKG. Group DKG is a rapidly growing global fibreglass equipment manufacturer with plants in the U.S.A. and Canada.
Contact: David Wolf, V.P. Sales and Marketing Address: 303 Nantucket Boulevard Scarborough, Ontario, M1P 2P2, Canada Phone: 1-416-751-9200 Fax: 1-416-751-9382 Email: dwolf@precisioneering.com Website: www.groupdkg.com
See Country Interests section for Europe, and Latin America and the Caribbean.
Contact: Jenn Burridge Address: Head Office Branch P.O. Box 1133 St-Lazare, Qubec J7T 2Z7, Canada Phone: 1-450-218-2665 Fax: 1-450-218-2672 Email: sales@protecepoxies.com Website: www.protecepoxies.com
106
www.camese.org
l walden equipment
Walden Equipment, a Sudbury-based company founded in 1993, has become a significant player in the mining and industrial service sectors. As a leader in new and used equipment, Walden Equipment offers equipment to customers in particular J&S Manufacturings high-quality, dependable and durable machines on a purchase or lease basis. In the past year, Walden Equipment has increased its workforce by 50% and is opening two satellite locations in Timmins, Ontario, and Valdor, Qubec, by fall 2010. Already, the companys ability to provide machines that are costefficient, easy to troubleshoot, simple to operate and designed for the end user finds Walden Equipment in places such as China, Honduras, Mexico, Peru, Brazil, Chile, the U.S., Australia, Africa, and across Canada. To fill all your equipment service needs, you can trust Walden Equipments teams of multifaceted mechanics, welders, millwrights and other shop personnel to give you the best brand equipment available along with their top-notch service.
Contact: Micah Ferguson, President Address: 106 Fielding Road Lively, Ontario P3Y 1L5, Canada Phone: 1-705-682-2084 Fax: 1-705-682-2564 Email: mferguson@waldenltd.ca Website: www.waldenltd.ca
www.camese.org
107
Celebrating its 25th anniversary in 2010, Westpro Machinery remains focused on its core priorities of developing the latest technologies, providing quick deliveries, customized products, superior service and competitive prices. The highest quality workmanship goes into every Westpro product, and the companys product line includes agglomerators, attrition scrubbers, clarifiers, flotation machines, grinding mills, lime slaking systems, rotary dryers, thickeners, and much more. Complete customized systems and complete modular plants can be supplied to meet customers
specifications. As well, Westpros streamlined production allows for prompt delivery times as short as eight to 10 weeks. You can find Westpro equipment installed throughout the world including Spain, Bolivia, Peru, Guyana, Chile, Mexico, Africa, Siberia, Canada, and the United States. Westpros commitment to excellence Advanced Technology, Advanced Results has established it as a leading name in the mining and aggregate industry, so contact Westpro and see how its experts can make your equipment procurement a satisfying experience.
108
www.camese.org
www.camese.org
109
Recording measurements of a new liner installed in a ball mill at Northgate Minerals Corporations Kemess South Mine, 430 kilometres northwest of Prince George, British Columbia.
110
www.camese.org
l snC-lavalin inC.
Expertise:
Project Management Global Procurement Mine Infrastructure Roads Power Plants Comminution Materials Handling Mineral Processing Concentrating Roasting Smelting Leaching Solvent Extraction Electrowinning Electrorefining Precious Metal Recovery Base Metal Recovery Pressure Oxidization Bio-Oxidization Cyanidation Cyanide Recovery/ Destruction Potash Processing Iron Ore Beneficiation Industrial Minerals Processing Geotechnical Engineering Tailings Acid Plants Environmental Studies Mine Closure & Reclamation
SNC-Lavalin Inc. is the largest engineering and construction company in Canada and is among the top five global design firms in the world. SNC-Lavalin has carried out more than 350 projects worldwide in the fields of alumina/aluminum, copper, gold, nickel, iron ore, zinc and potash, including all infrastructure components required for remote project development. As a multidisciplined organization with offices on every continent, SNC-Lavalin Mining and Metallurgy can undertake every stage of mining project development from scoping studies to EPCM projects, commissioning and mine closure. SNC-Lavalin offers world-class proprietary project management tools designed to achieve
cost and schedule goals, as well as global procurement capabilities able to capture the best services and materials at the best possible cost. SNC-Lavalin is committed to maintaining high standards for health, safety and the environment as well as sustainable development principles in all its projects.
Contact: Antonio Lovisi Client Relationship Manager Address: 195 The West Mall Toronto, Ontario M9C 5K1, Canada Phone: 1-416-252-5315, ext. 5597 Fax: 1-416-231-5356 Email: antonio.lovisi@snclavalin.com Website: www.snclavalin.com
www.camese.org
Camese Compendium of Canadian Mining Suppliers www.camese.org
111
l hatCh
Established in 1955, Hatch provides comprehensive business, process and technology consulting, design engineering, information technology, environmental services and project and construction management to the global mining, energy, metallurgical and other process sectors. Hatch also provides specialized mining-related services, including hoist engineering and maintenance and refrigeration plants for deep mines. With a staff of more than 9,000 in 65 offices around the world, Hatchs international reputation is based on successful projects in more than 100 countries. Hatch is noted for its ability to bridge the gap between research, engineering and operations. The company is particularly known for its ability to work with senior management on projects involving the scale-up of process technology, and the implementation and start-up of new innovations. Hatch emphasizes operating productivity and costeffective plants, integrating high levels of automation with manufacturing execution systems, clean plant design, energy efficiency, plant safety using HAZOP and other proven safety methodologies
Contact: Tom Reid Address: 2800 Speakman Drive Mississauga, Ontario, L5K 2R7 Canada Phone: 1-905-403-3733 Fax: 1-905-403-3803 Email: treid@hatch.ca Website: www.hatch.ca
As detailed in its 2009 Transportation in Canada publication, Transport Canada reports trucks carried $137 billion worth of Canadian exports in 2008 (down 20% from the previous year, reflecting the recession), of which $13 billion or 9.3% was base metals and articles of base metal. Of the $193 billion in imports shipped by truck, $15 billion (7.7%) was base metals and articles of base metal. Only small quantities of minerals, ores and concentrates are traded by truck around 0.5% of total truck exports and 0.1% of imports.
Source: Facts & Figures 2010/The Mining Association of Canada
112
www.camese.org
Shaft sinking in a base metal mine in north western Qubec at 7,000 feet from the surface
Snowden Mining Industry Consultants Inc. is uncompromising in its delivery of highest quality services to the mining and related industries. During the past 22 years, Snowden has established a proven track record thats recognized in more than 40 countries worldwide. With extensive experience in both open-pit and underground mining methods, Snowden can
www.camese.org
Camese Compendium of Canadian Mining Suppliers www.camese.org
you can source online for almost any product, service or technology used in mining and supplied by Camese members.
113
Surveyors record drill hole alignment at IAMGOLDs Doyon Division Gold Mines, Abitibi region, Qubec.
114
www.camese.org
www.camese.org
your guide to Canadian mining technology on the internet.
Camese Compendium of Canadian Mining Suppliers www.camese.org
115
See Country Interests Section for Asia-Pacific, Australia, Latin America and the Caribbean, and Sub-Saharan Africa.
Contact: James D. Tod, MSc(Eng), P.Eng. Senior Engineer Address: Suite 6 1045 John Counter Blvd. Kingston, Ontario K7K 6C7, Canada Phone: 1-613-549-5223 Fax: 1-613-549-4120 Email: sales@mdt.ca Website: www.mdt.ca
In the medium term, most mining analysts believe that a combination of continued development in China, a depreciated U.S. dollar, aging western infrastructure, industry consolidation and a dearth of new mining projects worldwide will create strong mineral price fundamentals.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
Motion Metrics International Corp. is a leading technology company with innovative solutions for the mining industry. Its rugged monitoring products can be used either standalone or networked to increase production efficiency, minimize downtime and improve safety of the mining operations. Products include
l opteCh inCorporated
Optech Incorporated is the world leader in the development, manufacture and support of advanced laser-based surveying, mapping and imaging instruments. Optech offers Light Detection and Ranging (LiDAR) and imaging solutions in airborne terrestrial mapping, airborne laser bathymetry, high-speed mobile mapping, mine cavity monitoring, industrial process control and spacebased operations. Developed for underground mining environments, Optechs Cavity Monitoring System (CMS) quickly collects thousands of accurately located points that are used to determine a cavitys size, orientation and volume, and to create detailed engineering drawings. With a 10-kHz data acquisition rate and a range of over 1.5 km, Optechs tripod-mounted ILRIS-3D Laser Scanner is especially useful in openpit mines where accurate ranging, robust field performance and portability are crucial. Optechs Lynx Mobile Mapper has also proven effective in mining applications. Mounted on a moving vehicle, it collects geo-referenced data sets in a fraction of the time required for traditional surveying methods.
Contact: Ray Charron Address: 300 Interchange Way Vaughan, Ontario L4K 5Z8, Canada Phone: 1-905-660-0808 Fax: 1-905-660-0829 Email: inquiries@optech.ca Website: www.optech.ca
dont forget to look at Cameses Country interests listings on pages 152 & 154.
www.camese.org
www.camese.org
117
Mineral products have strategic importance to countries with large infrastructure needs and manufacturing sectors. Its not unusual for the global mining industry to be directly affected by international trade and investment policy.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
www.camese.org
119
Engineered to specific certification standards Effective in hazardous and non-hazardous environments ISO 9001:2000 registered
Snowden Mining Industry Consultants Inc. is uncompromising in its delivery of highest quality services to the mining and related industries. During the past 22 years, Snowden has established a proven track record thats recognized in more than 40 countries worldwide.
120
www.camese.org
www.camese.org
121
Miners waiting for the cage to start their shift underground at IAMGOLDs Mouska Mine, Doyon Division Gold Mines, Abitibi region, Qubec.
l nL TeChnoLogies (nLT)
NL Technologies (NLT) is an innovator of technologies that improve safety and productivity in the mining industry. NLT designs and manufactures cap lamp systems and digital communication systems. Northern Light cap lamp systems are the Brightest and the Best, designed for maximum durability and comfort, while offering integrated tracking, power take-off and two-way communication lighting systems. In 2009, NLT launched the MSHA, IECEx and ATEX approved all-in-one cordless cap lamp-Polaris, which integrates the battery and light source in one enclosure. The contemporary design gives it a new-age look while maintaining a superior light pattern thats consistent with NLTs other lamp technologies. Northern Light Digital offers a holistic approach to communications within the underground mine. The Northern Light Digital Network is an open standard network using Ethernet protocol and wireless communication technologies to enable a fully connected digital mine. The digital network and software solution supports myriad applications including personnel and equipment tracking, two-way communication, VoIP, proximity detection, environmental monitoring and video and data transfer to meet all demands of the modern mine.
Contact: Nataly Simonian Marketing Coordinator Address: 33 Laird Drive Toronto, Ontario M4G 3S9 Canada Phone: 1-416-425-6559, ext. 252 Fax: 1-416-425-5960 Email: nsimonian@nltinc.com Website: www.nltinc.com
122
www.camese.org
STC Footwear Inc. is a manufacturer and developer of technical industryspecific safety footwear. Having worked for many years with mining Health and Safety Committees, STC Footwear has developed mining boots that are best-of-class in all aspects of safety from ankle support to slip
resistance as well as provided increased durability or the lifecycle of the product. Within its offering, STC has developed several exceptional boots for the mining industry. One is the patented Metatech internal metguard system, believed to be, by far, the best internal met system in the market
www.camese.org
123
Analytical Laboratories and Supplies Security intelligence and Personnel Services Radio Frequency identification
l Bgn risk
BGN Risk is a corporate security risk consultancy focused on identifying, managing and reducing security risk in international locations to protect the assets, employees and customer goodwill of its clients. BGN Risk provides strategic and operational support through its international network of highly experienced security risk consultants. Working in close collaboration with mining and exploration company executives means BGN can instill proportionate control frameworks to protect core business activities and secure the financial benefits that effective security risk management yields in the mining and exploration sector. Having supported exploration and infrastructure development projects for companies in some of the worlds most hostile environments, BGN Risk has built an enviable reputation for successfully securing international mining operations. Its core services include: a) security risk assessment and due diligence; b) practical security planning and provision; c) infrastructure project support; d) crisis management and business resilience planning; e) BGN Risk Virtual Security Director service; and f) extensive site security training programs.
Contact: Liam Morrissey Address: BGN Risk 32 Cornhill London, United Kingdom EC3V 3BT Phone: 011-44-20-7398-3800 Fax: 011-44-20-7398-3799 Email: liam.morrissey@bgn-risk.com Website: www.bgn-risk.com
124
www.camese.org
Analytical Consultants Supplies Smelting and Refining Equipment and Services Risk Management Laboratories
l heath & sherwood
Heath & Sherwood has been suppliers of quality solutions to the mining industry since 1927. The company is known for close contact with its customers and prides itself on client service that adapts the product line to specific customer needs. Heath & Sherwood supplies the Gasp Tuyere Puncher, patented Gasp Tuyere Automation Systems, Tuyere Silencers, patented Tuyere Pyrometer and Tuyere Line Refractory Drill. Used in most copper and nickel smelters, Heath & Sherwoods smelting equipment helps customers maximize their smelter process with quick payback. These benefits include extended campaign life, increased blowing capacity, enhanced process uniformity and improved working conditions. Headquartered in Kirkland Lake, Ontario, Heath & Sherwood has subsidiary offices in Mississauga, Ontario, and representatives in Brazil, Mexico, Peru, Chile, India, Italy, South Africa and Australia.
Ask about our new variable speed drive system for the Gasp Puncher.
Contact: Peter Marinigh Address: P.O. Box 340, Kirkland Lake, Ontario P2N 3J2, Canada Phone: 1-705-567-5313, ext. 101 Toll Free: 1-888-467-2675 1-888-GOSAMPL(E) Fax: 1-705-568-8545 Email: info@heathandsherwood64.com Email: peter@heathandsherwood64.com Website: www.heathandsherwood64.com
www.camese.org
125
Information technology workers checking systems at De Beers Canadas, Victor Mine, near Attawapiskat, Ontario.
126
www.camese.org
www.camese.org
127
Snowden Mining Industry Consultants Inc. is uncompromising in its delivery of highest quality services to the mining and related industries. Among its services is Snowden Technologies, an independent information systems solution provider for the mining industry. Building on
in addition to providing members with information and advice, advocacy and an international marketing program, CAMESE the Canadian Association of Mining Equipment and Services for Export is most interested in providing foreign brokers or end-users with reliable sources of all types of goods and services used in the mining industry.
www.camese.org
128
Camese Compendium of Canadian Mining Suppliers www.camese.org
Supplies Surface Analytical Laboratories and Services Risk Management Consultants Components Mobile Equipment and
Truck being loaded with ore from Lake Shore Gold Corp.s Timmins Mine to be transferred to the mill at their Bell Creek Complex, Timmins, Ontario.
www.camese.org
129
Analytical Laboratories and Supplies Surface Mobile Equipment and Radio Frequency identification Components
l argo utv
ARGO UTV: Your work demands that you get to remote sites through challenging terrain with your equipment and crew. Performance and time are crucial factors in the success of your operation. Designed for reliability in the toughest conditions, the amphibious ARGO travels through flooded areas, deep mud, and over rocks, snow and ice. The all-season ARGO transports up to six passengers and has the load capacity of up to 1,150 lbs. Designed for the mining sector, resource exploration, utility construction and maintenance, as well as agriculture and forestry, the ARGO can be equipped with optional accessories such as rubber tracks, convertible top, receiver winch, drills, cargo boxes and cranes. Engineered and produced continuously since 1967, every ARGO is backed by decades of unrivaled experience in the design and manufacturing of off-road vehicles. Today, ARGO is the worlds premier manufacturer of lightweight amphibious vehicles and innovative off-road platforms.
Contact: Bob Hunter Director International/Canada Sales Address: 220 Bergey Court New Hamburg, Ontario N3A 2J5, Canada Phone: 1-519-662-2840, ext. 211 Toll Free: 1-877-274-6288 Fax: 1-519-662-2421 Email: rwh@ARGOutv.com Website: www.argoutv.com
130
www.camese.org
Supplies Surface Analytical Laboratories and Services Risk Management Consultants Components Mobile Equipment and
l CnC industries ltd.
CNC Industries Ltd. has designed and manufactured premium replacement parts for all heavy-duty equipment used in the mining industry since 1985. With CNCs unique weld overlay pin and in-house forged manganese bushings, customers have increased bucket and dipper life by 300% over OEM. Whether for mobile equipment, the largest or smallest draglines and shovels, CNC can deliver impressive ROI. CNC can match and exceed OEM specifications, engineer a customers modifications or provide designs and solutions based on years of experience. With CNCs 4- and 5-axis machining capabilities and ISO 9001:2000 certification, almost any item can be fabricated. CNC currently produces dipper, bucket and mine mobile equipment pins and bushings, shovel undercarriage rollers, roller pins and bushings, track pins, idler shafts, shipper shafts and drive-shaft brass bushings, and crusher bushings, etc., at considerable savings over OEMs. P&H, Bucyrus, Caterpillar, Hitachi, and Letourneau are just a sample of the many makes for which CNC manufactures aftermarket parts. Call to receive a catalogue or visit the CNC website to obtain more information and learn about their vast selection of products.
Contact: Perry Gill, VP of Operations Address: 9331 39th Avenue Edmonton, Alberta T6E 5T3, Canada Phone: 1-780-469-2346 Toll Free: 1-977-CNC-2343 Fax: 1-780-466-5159 Email: sales@cncindustries.com Website: www.cncindustries.com
CWS Industries (Mfg) Corp. is a Canadian corporation specializing in the design and manufacture of attachments for heavy equipment. Products used extensively worldwide in the open cast and underground mining industries include tire handlers, cable reelers, cable lay-out booms, cable repair stations, dozer
blades (track and wheel), quick couplers and buckets (loader and excavator), and blasthole stemmers. Close liaison is maintained between CWS engineers and major OEMs to optimize each machine/attachment application. Experienced technical sales combined with knowledgeable engineering and skilled
www.camese.org
131
Analytical Laboratories and Supplies Surface Mobile Equipment and Radio Frequency identification Components
l herCules equipment ltd.
Hercules Equipment Ltd., based in Greater Vancouver, British Columbia, has long been internationally recognized as a leader in engineering heavy equipment due to its innovative designs and superb craftsmanship. Hercules Equipment Ltd. is also renowned for tailoring its quality equipment to suit every customers needs. The company specializes in tow truck attachments for recovering disabled haulage vehicles and low-
bed mining trailers for transporting drills, shovels, loaders and dozers. Other mining products include cable reel handlers, water trucks, rock spreaders, tire handlers and dump trailers. Backed with quality assurance, customer service and an engineering staff with more than 20 years experience, Hercules Equipment Ltd. has acquired clientele from across the globe ranging from North America, South America, Asia, and Southeast Asia.
Contact: Peter So, President Address: Unit 201 8988 Fraserton Court Burnaby, British Columbia V5J 5H8, Canada Phone: 1-604-988-9328 Fax: 1-604-988-3239 Email: peterso@hercules-equipment.com Website: http://hercules-equipment.com
132
www.camese.org
Supplies Surface Analytical Laboratories and Services Risk Management Consultants Components Mobile Equipment and
l morgan industrial supply ltd.
Morgan Industrial Supply Ltd. has been the leading supplier of industrial brakes for the mining and forestry industry in western Canada for more than 70 years. Today, the company has expanded operations into the oil and gas sector, has opened a location in Texas and expanded to seven locations in the Republic of Chile to service the mining and industrial sectors. Its product offerings have also expanded to brake assemblies, clutch assemblies, friction materials, hydraulic pumps and motors, air systems, drive systems and seating. Morgans specialty includes rebuild and exchange services for caliber and wet brakes, drive systems, rear suspensions and hydraulics on large-haul trucks and mining shovels. Morgan also has developed unique expertise in the braking systems of this equipment and represents major product lines in brakes, clutches, hydraulics, industrial seating and air systems.
See Country Interests Section for Latin America and the Caribbean.
Contact: Alan Lund Address: 1700 Savage Road Richmond, British Columbia V6V 3A9, Canada Phone: 1-604-249-1120 Fax: 1-604-247-0039 Email: alund@morgan.ca Website: www.morgan.ca
ORO Design & Manufacturing Ltd. is a privately owned Canadian manufacturer of severe-duty truck bodies and service equipment designed
to perform in the harsh conditions of northern mining and construction sites. OROs product line includes lubrication trucks, mechanics service
l prinoth
PRINOTH vehicles are designed to carry heavy equipment, personnel, and other materials for a variety of applications. PRINOTH responds to your needs in the demanding fields of mining, construction and maintenance of energy infrastructures, telecommunications, public works, oil and gas exploration, snow grooming, as well as forestry management. PRINOTH strives to bring innovative, trend-setting solutions and products of the highest quality to its customers. PRINOTH is your solution to get the job done on every type of terrain and in extreme conditions.
Contact: Amine Khimjee International Sales Manager Address: 1001 J.-A. Bombardier Street Granby, Qubec J2J 1E9, Canada Phone: 1-450-531-2140 Fax: 1-450-776-6030 Email: amine.khimjee@prinoth.com Website: www.prinoth.com
www.camese.org
133
Analytical Laboratories and Supplies Surface Mobile Equipment and Radio Frequency identification Components
l reliaBle wheel produCts ltd.
through 63-in. JackStands support equipment from 50 through 250 tons. With their unique transporter, these designed support stands can be easily placed beneath any piece of heavy mobile equipment. Reliable Wheel products offer specialized, severeservice wheels and rims in sizes 25-in. through 63-in. diameter for extreme applications. Torque application and testing equipment and used-tire handling equipment are also available.
Reliable Wheel Products Ltd. offer products used in the maintenance of heavy equipment. SuperLift Jacks are air/hydraulic and electric/hydraulic. All are power-driven and are available in models from 50 to 350 tons for underground or surface mining equipment. ManLift Work Platforms raise workers to a safe working height when installing, cleaning, torquing or removing large diameter tires and wheels. They are equipped with air/ impact and air/hydraulic torque guns and high-speed cleaning tools plus foot controls to allow easy, free access to the work area. SuperPress Tire Press
Centres, which are electric/hydraulic tire presses for OTR tires, are complete work centres for large tire shops. They change tire sizes 25-in.
134
www.camese.org
Supplies Risk Management Laboratories and Services SurfaceAnalytical Consultants Components Mobile Equipment and
l valley Blades ltd.
Valley Blades Limited, ISO 9001:2008 certified, manufactures replacement wearing edges for earth and snow removal equipment including bulldozers, road graders, loaders, scrapers, excavators, and snow plows. These wearing edges are manufactured using computer-assisted technology to rigid specifications that meet or exceed those set by the original equipment manufacturer. Since it began in the early 1960s, Valley Blades Limited has grown into a world supplier of replacement wearing edges and has built a strong dealer network that supplies competitively priced, quality products and reliable service backed by an extensive inventory. Valley Blades Limited manufactures replacement wearing edges for Caterpillar, Komatsu, Deere, Case, Terex, Volvo and more, and has manufacturing facilities located in Waterloo, Ontario, and Edmonton, Alberta, Canada, to serve the mining industry nationwide and customers around the world.
Contact: Randy Sauer, Sales Manager Address: 435 Phillip Street Waterloo, Ontario N2J 3Z9, Canada Phone: 1-519-885-5500 Phone Toll Free: 1-800-461-1824 Fax: 1-519-746-2780 Email: sales@valleyblades.com Email: rsauer@valleyblades.com Website: www.valleyblades.com
trade Consultants
l toronda heavy industry Co., ltd.
Toronda Heavy Industry Co., Ltd. provides state-of-the-art Canadian technology and products to the booming mining market in China, where improved productivity, safety and environmental performance are a priority. With an office in Ontario, and headquarters at Dalian SIME Co., Limited in China, Toronda understands the needs of Canadian suppliers and Chinese buyers. Most of Torondas employees, whether managers or sales representatives, have mining-related educational and career backgrounds. This enables them to acquire valuable market information that results in sales to benefit both buyer and seller. They have supplied the Shenhua Group, Huaneng Yimin Coal & Electricity Co., Ltd. and Huo Lin He Coal & Power Co., Ltd. with Canadian equipment and services, thus establishing a connection that benefits other Canadian firms. Toronda can also provide consulting services for doing business with China, by setting up a branch office in China or importing products to the North American market from China. Now is the time to ensure that you are well represented in a large market that is just beginning to integrate into the global mining scene. Contact Toronda, your trade bridge to the Chinese mining market.
Contact: Frank Yin, General Manager Address: 95 Kerwood Drive Cambridge, Ontario N3C 4E3, Canada Phone: 1-519-651-1666 Cell: 1-519-242-7971 Fax: 1-519-651-1650 Email: franky@sime.cn
www.camese.org
135
Xstrata Coppers 29 kilometre railroad that connects the mine and the metallurgical operations, Timmins, Ontario.
See Country Interests Section for Asia-Pacific, Europe, North America and Worldwide.
Contact: Jeff Haley Address: Unit 228, 21300 Gordon Way Richmond, British Columbia V6Y 1M2, Canada Phone: 1-604-244-5940 Fax: 1-604-277-2301 Email: jeff-haley@bricanada.com Website: www.bellvillerodair.com
136
www.camese.org
www.camese.org
137
CAMESE was originally founded in 1981 as Ontario Mining Equipment and Services for Export.
www.camese.org
138
www.camese.org
A scoop comes to surface with a load of ore at Lake Shore Gold Corp.s Bell Creek Complex, Timmins, Ontario.
www.camese.org
139
See Country Interests Section for Asia-Pacific, Latin America and the Caribbean, Middle East and North Africa, North America, Sub-Saharan Africa and Worldwide.
Contact: Mohammed Alwazani Address: Suite 1, 889 Pantera Drive Mississauga, Ontario L4W 2R9, Canada Phone: 1-905-602-9291, ext. 1 Fax: 1-905-602-9296 Email: malwazani@arkbro.com Website: www.arkbro.com
140
www.camese.org
DUX Machinery Corporation is a privately owned Canadian manufacturer and supplier of heavyduty underground equipment designed to meet the needs of mining
Contact: Hermann Bumueller, President Address: 615 rue Lavoisier Repentigny, Qubec J6A 7N2, Canada Phone: 1-450-581-8341 Fax: 1-450-581-5138 Email: info@duxmachinery.com Website: www.duxmachinery.com
1-877-274-6288
* ARGO models only. Does not apply to CENTAUR 8x8.
ARGOutv.com
142
www.camese.org
FLSmidth, Underground Mining Division, is a world leader in the design and supply of underground shaft equipment, mine hoists, and rope attachments. FLSmidth has provided complete innovative solutions to all facets of ore handling for more than 80 years. Representing the Dorr-Oliver and Vecor brands, FLSmidth is considered the standard of the industry, delivering some of the worlds largest hoists, rope sheaves,
l maClean engineeRing
MacLean Engineering is a privately owned Canadian company that specializes in the design and manufacture of underground mining equipment. MacLean Engineerings head office and main manufacturing operations are located in Collingwood, Ontario, Canada. MacLean Engineering understands the importance of after-market support and service. As such, MacLean Engineering has established a network of sales and support locations in Canada, the United States, Australia, South Africa and South America. MacLean Engineering provides its customers with complete solutions to their underground tunneling and mining operations through a full line of mobile support and service vehicles. MacLean Engineerings equipment line-up includes Ground Support [Scissor Bolters for both standard and small section developments; Shotcrete Sprayers & Transmixers], MineMate Utility Vehicles [Scissor Lifts, Boom Trucks, Personnel Carriers, Fuel/Lube Trucks, Cassette Systems, Fan Handler, etc] and Ore Flow Facilitation Vehicles [Secondary Breakers], which work hard to support underground operations and keep production on target.
Contact: MacLean Engineering Equipment Sales & Product Support 1067 Kelly Lake Road Sudbury, Ontario P3E 5P5, Canada Toll Free: 1-866-856-3626 Email: sales@macleanengineering.com Website: www.macleanengineering.com
www.camese.org
143
Marcotte Mining Machinery Services Inc. has 31 years of supply and service experience in the mining industry and is the OEM of the original Minejack Carrier, which is the base design used by most utility equipment suppliers. Marcottes RL4000 Scissor Lift is the longest lasting unit in the market today with
the lowest operating cost per hour. Units are fully tested and certified to all load, stability, safety and industry requirements. Marcotte Mining Machinery Services know the harsh environments that their units are expected to perform in and theyve designed them to meet these harsh conditions. Their confidence in
144
www.camese.org
Engineered to specific certification standards Effective in hazardous and non-hazardous environments ISO 9001:2000 registered
Why dont you carefully review CAMESEs suBseCtoR index on pages seven to 15 to find what you are looking for?
www.camese.org
www.camese.org
145
The mining sector is an important contributor to the business volumes of the St. Lawrence Seaway. According to the Seaway Corporations annual traffic report, shipments of iron ore, coke and coal represented 37% of total Seaway traffic in 2009, while other mine products (mainly salt) contributed a further 14%.
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
Global InfoMine data provide an interesting comparison of the relative size of the mining supply sector in leading countries. The U.S. ranks first with 5,526 suppliers, followed by Canada (3,223), Brazil (2,510), Chile (1,628), Australia (1,273), UK (969), Peru (957), Argentina (814), China (581) and South Africa (513).
Source: Facts & Figures 2010/The Mining Association of Canada
www.camese.org
147
Skip/Cage Combination
Come visit Cameses booth at the pdaC 2011, toronto, ontario, march 6 to 9, 2011.
www.camese.org
148
www.camese.org
The Xstrata Kidd Mine 6000 level booster fan. Because of the depth of the Kidd Mine, two large axial fans were installed on the 6000 level ( 1800 m below surface ) as exhaust booster fans to operate in series with the surface exhaust fans, Timmins, Ontario.
www.camese.org
149
www.camese.org
www.camese.org
150
www.camese.org
151
ASiA-PACifiC
Mine Radio Systems Inc. . . . 26, 120, 145, IBC Email: sales@mineradio.com Services: flexcom, Multicom, Centrian, Helian
lpakistan
Arkbro Industries . . . . . . . . . . . . . . . . . . . .64, 140
lportugal lRomania
Bellville Rodair International (BRI) . . . . . . . 136
lphilippines
Arkbro Industries . . . . . . . . . . . . . . . . . . . 64, 140
laustralia
KPM Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Mine Design Technologies . . . . . . . 84, 86, 116 Coffey Mining: New Town Address: Suite 2, 31-33 Tower Road New Town, Tasmania 7008 Phone: +61 3-6208-6800 fax: +61 3-6208-6899 Services: intelligent mining instrumentation Mine Design Technologies . . . . . . . 84, 86, 116 Coffey Mining: Notting Hill Representative: Simon Bailey Unit 1, 21 Howleys Road Notting Hill, Vic 3169 Phone: +61 3-9562-7111 fax: +61 3-9562-7133 Email: simon_bailey@coffey.com Services: intelligent mining instrumentation Mine Design Technologies . . . . . . . 84, 86, 116 Coffey Mining: Osborne Park Address: 24 Hasker Road Osborne Park WA 6017 Phone: +61 8-9347-0000 fax: +61 8-9347-0090 Services: intelligent mining instrumentation
lThailand lVietnam
EUROPE
Mine Radio Systems Inc. . . . . . . . . 24, 117, IBC Email: sales@mineradio.com Services: flexcom, Multicom, Centrian, Helian
lRussia lserbia lslovak Republic lspain lsweden lswitzerland lTurkey lukraine lunited Kingdom
Bellville Rodair International (BRI) . . . . . . . 136
largentina
Arkbro Industries . . . . . . . . . . . . . . . . . . . 64, 140 Canadian Wear Technologies Ltd. . . . . . . . . 34 Hepburn Engineering Inc. . . . . . . . . . . . . . 24, 87
ldenmark lFinland
Bellville Rodair International (BRI) . . . . . . . 136
lBarbados lBrazil
Canadian Wear Technologies Ltd. . . . . . . . . 34 Hepburn Engineering Inc. . . . . . . . . . . . . . 24, 87 Rotesco Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
lFrance
Bellville Rodair International (BRI) . . . . . . . 136
lGermany
Bellville Rodair International (BRI) . . . . . . . 136
lChile
Activation Laboratories Ltd. . . . . . . . . . . . . . . .17 Arkbro Industries . . . . . . . . . . . . . . . . . . . 64, 140 Canadian Wear Technologies Ltd. . . . . . . . . 34 Hepburn Engineering Inc. . . . . . . . . . . . . . 24, 87 Mine Design Technologies . . . . . . .84, 86, 116 in Situ Testing Chile Ltda Representative: Patricio Leido Araya Address: dr. Barros Borgono 24d Providencia, Santiago, Chile Phone: (56-2) 236-1499 fax: (56-2) 236-2850 Email: plledo@insitutesting.cl Services: intelligent mining instrumentation Rotesco Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
lGreece lHungary
Bellville Rodair International (BRI) . . . . . . . 136
lindia
Hepburn Engineering Inc. . . . . . . . . . . . . . 24, 87
lindonesia
Arkbro Industries . . . . . . . . . . . . . . . . . . . 64, 140 Hepburn Engineering Inc. . . . . . . . . . . . . . 24, 87
lnorway lpoland
lColombia
152
www.camese.org
NORTH AMERICA
Manitoulin Group of Companies . . . . . . . . . 137 Services: Transportation and Logistics Mine Radio Systems Inc. . . . 26, 120, 145, IBC Email: sales@mineradio.com Services: flexcom, Multicom, Centrian, Helian
lmexico
Arkbro Industriess . . . . . . . . . . . . . . . . . .64, 140 Canadian Wear Technologies Ltd. . . . . . . . . 34 Hepburn Engineering Inc. . . . . . . . . . . . . . 24, 87 Mine Design Technologies . . . . . . . 84, 86, 116 Productos Canadienses, S.A. DE C.V. Acita de Bajn #152 Parque industrial Lagunero Gomz Palicio, Dgo., MEXICO CP 35078 Phone: (871) 719 9000 fax: (871) 719 9000 Email: mike.neumann@procan.com.mx Services: Intelligent mining instrumentation Rotesco Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
lunited states
Arkbro Industries . . . . . . . . . . . . . . . . . . . .64, 140 Bellville Rodair International (BRI) . . . . . . . 136 Canadian Wear Technologies Ltd. . . . . . . . . 34 Hepburn Engineering Inc. . . . . . . . . . . . . . 24, 87 KPM Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
SUB-SAHARAN AfRICA
Mine Radio Systems Inc. . . .26, 120, 145, IBC Email: sales@mineradio.com Services: flexcom, Multicom, Centrian, Helian
ltanzania
Arkbro Industries . . . . . . . . . . . . . . . . . . 64, 140
lZambia
Arkbro Industries . . . . . . . . . . . . . . . . . . 64, 140
lZimbabwe
Arkbro Industries . . . . . . . . . . . . . . . . . . 64, 140
154
www.camese.org
www.camese.org
mining & i BCl Dave Britney mechanical ltd. Contact:
Location: Truro, Nova Scotia, B2N 6Y5 Email: dbritney@britneyconveyor.ca Website: www.britneyconveyor.ca
Location: Prince George, British Columbia, V2M 7B4 Email: info@simsgroup.ca Website: www.alsims.ca
Corporation i Ceva Freight Canada Account Executive Contact: Shane Charlton, Global
Location: Mississauga, Ontario, L4W 5N4 Email: shane.charlton@cevalogistics.com Website: www.cevalogistics.com
i alberta innovates
Contact: Paul Johnston, Sensors Engineering Location: Edmonton, Alberta, T6N 1E4 Email: johnston@arc.ab.ca Website: www.albertainnovates.ca
technology Futures
i Custom house,
Location: Burnaby, British Columbia, V5G 3L1 Email: staceyg@alliancemercantile.com Website: www.alliancemercantile.com
Contact: Zoya Lovell, National Manager Location: Vancouver, British Columbia, V7X 1P4 Email: zlovell@customhouse.com Website: www.customhouse.ca
minerals division
Location: Delta, British Columbia, V4G 1K8 Email: bits@diaset.com Website: www.diaset.com
i Canadian exploration
Contact: Bill Bonney Location: Larder Lake, Ontario, P0K 1L0 Email: bboney@explorationservices.ca
services limited
i assessment Rehabilitation
Contact: Mary Crunkleton, Director, Employer Services Location: Toronto, Ontario, M2J 1P9 Email: mary@arsi.ca Website: www.arsi.ca
Location: Val dOr, Qubec, J9P 6X6 Phone: 1-819-824-1413 Email: domeq@cablevision.qc.ca Website: www.domeq.ca
Location: Kamloops, British Columbia, V2C 5P2 Email: sales@candig.com Website: www.candig.com
Location: Vancouver, British Columbia, V6B 5C6 Email: Yvonne.deboer@ausenco.com Website: www.ausenco.com
www.camese.org
155
i Fednor international
Contact: Pamela McRae Location: Sault Ste. Marie, Ontario, P6A 6V4 Email: mcrae.pam@ic.gc.ca Website: www.fednor.ic.gc.ca
Business Centre
i Horne Conveyance safety Ltd. Contact: Steve Hill, Sales Manager North America
Location: Barrie, Ontario, L4M 1E3 Email: steve@hornecs.ca Website: www.hornecs.ca
Location: West Vancouver, British Columbia, V7S 1A1 Email: maurice@freivokhtech.com Website: www.freivokhtech.com
i mReL Group of Companies Limited Contact: A.W. (Bill) Bauer, Vice President
Location: Kingston, Ontario, K7L 4V4 Email: bbauer@mrel.com Website: www.mrel.com
Location: Vancouver, British Columbia, V6P 3G2 Email: philm@gekkos.ca Website: www.gekkos.com
Wilson Canada Ltd. i Geodis Ghosh, Field Sales Manager Contact: Deb
Location: Mississauga, Ontario, L4V 1R4 Email: deb.ghosh@ca.geodiswilson.com Website: www.geodiswilson.com/ca-en
Location: Surrey, British Columbia, V3S 9A4 Email: info@nitrolube.com Website: www.nitrolube.com
156
www.camese.org
Location: Fort Saskatchewan, Alberta, T8L 4R1 Email: lori.klebak@sulzer.com Website: www.sulzermetco.com
i terra Remote sensing inc. (tRsi) Contact: Patricio Vergara, BSc., MBA
Location: Sidney, British Columbia, V8L 5Y3 Email: patricio.vergara@terraremote.com Website: www.terraremote.com
products ltd.
Contact: Paul Freedman, President Location: Montreal, Qubec, H2Z 1V7 Email: paul.freedman@simlog.com Website: www.simlog.com
i simlog inc.
i trendway transportation
Contact: Mark Kreplin, Managing Partner Location: Bolton, Ontario, L7E 5T3 Email: mark@trendway-transport.com Website: www.trendway-transport.com
services inc.
Location: Okanagan Falls, British Columbia, V0H 1R2 Email: mburleigh@uee.com Website: www.uee.com
Location: Copper Cliff, Ontario, P0M 1N0 Email: bernt@rocvent.com Website: www.rocvent.com
& liesenfeld Canada i Rohde Beringer, President and CEO inc. Contact: Jan
Location: Calgary, Alberta, T2P 3N4 Email: jan.beringer@rolicanada.com Website: www.rolicanada.com
instant structures ltd. i sprung Jeske, Branch Office Manager Contact: Paul
Location: Oakville, Ontario, L6J 7L7 Email: toronto@sprung.com Website: www.sprung.com
Location: Richmond, British Columbia, V6V 1K9 Email: elvis@vangear.com Website: www.vangear.com
i westland environmental
Contact: Anil Chibber, Vice President Location: Edmonton, Alberta, T5S 1X8 Email: anilc@wesonline.ca Website: www.wesonline.ca
services inc.
www.camese.org
157
depending on the importance of the event and the number of participants, Camese provides a broad range of services to the participants. These are:
i prime locations for Canadian exhibit areas at trade shows. i Competitive booth prices for CAMESE members in Canada Pavilions. i assistance to exhibitors on logistics related to the trade show. i Fully equipped individual or shared booths of various sizes. i Canada Pavilion with custom-designed decoration, common areas for meetings, business services, on-site storage area, and booth assistance staff. i Supervised poster display combined with related literature distribution and sales leads generation for CAMESE members without a booth. i Distribution of the CAMESE Compendium of Canadian Mining Suppliers to visitors in the CAMESE poster booth.
For more detailed information on the services provided by Camese and on any of the events listed on page 151, please contact:
Maurice Bichsel, Director International Market Development Phone: 1-905-513-0046, ext.303 Fax: 1-905-513-1834 Email: bichsel@camese.org
Dolores Wharton, Project Co-Ordinator Phone: 1-905-513-0046, ext.305 Fax:1-905-513-1834 Email: wharton@camese.org
158
www.camese.org
C
Canada Economic Development for Quebec Regions . . . . . . . . . . . . . . . . . . . . . 155 Canadian Diamond Drilling Association . . . . . . . . 20 Canadian Exploration Services Limited . . . . . . . 155 Canadian Institute of Mining, Metallurgy and Petroleum (CIM) . . . . . . . . . . . . .19 Canadian Mill Gear Solutions Inc. . . . . . . . . . . . . 155 Canadian Mining Journal . . . . . . . . . . . . . . . . . . . . 89 Canadian Wear Technologies . . . . . . . . . . . . . . . . 34 CanDig Mini Excavators Inc. . . . . . . . . . . . . . . . . 155 Canun International . . . . . . . . . . . . . . . . . . . . . . . . . 52 Cattron-Theimeg Canada Ltd. . . . . . . . . . . . . . . . . 23 Century Systems Technologies Inc. . . . . . . . . . . 155 CEVA freight Canada Corporation . . . . . . . . . . . 155 CG Industrial Specialties Ltd. . . . . . . . . . . . . . . . 100 C.J. Stafford & Associates . . . . . . . . . . . . . . . . . . . 93 CK Logistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 CME Blasting and Mining Equipment Ltd. . . . . . . 53 CNC Industries Ltd. . . . . . . . . . . . . . . . . . . . . . . . 131 Cogep Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74, 127 Cole freight Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . 137 ConMICO Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Conspec Controls Ltd. . . . . . . . . . . . . . . . . . . . . . .115 Control Chemical (1989) Corporation . . . . . . . . . 53 COREM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 Crone Geophysics & Exploration Ltd. . . . . . . . 78, 83 Cubex Limited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Custom House, A Western Union Company . . . 155 CWS Industries (Mfg) Corp. . . . . . . . . . . . . . . . . 131 Cypher Environmental Ltd. . . . . . . . . . . . . . . . . . . . 69
B
Baroid Industrial Drilling Products . . . . . . . . . . . . . 52 Bateman Technologies Corp. . . . . . . . . . . . . . . . . . 33 BBA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 BCL Mining & Mechanical Ltd. . . . . . . . . . . . . . . 155 Bellville Rodair International (BRI) . . . . . . . . . . . 136 BGN Risk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 B.I.D. Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 BIODISK Corporation . . . . . . . . . . . . . . . . . . . . . . 70 Boundary Equipment Co. Ltd. . . . . . . .100, 130, 142 BPT Components & Parts Inc. . . . . . . . . . . . 140, 141 Bradley Bros. Limited . . . . . . . . . . . . . . . . . . . . . . . 50 Breaker Technology, Ltd. (BTI) . . . . . . . . . . . 33, 139 Brent Packaging & Logistics Ltd./ Emballages & Logistique BRENT . . . . . . . . . . . . 48
D
Design Shelter Inc. . . . . . . . . . . . . . . . . . . . . . . . . . 29 Diaset Products Ltd. . . . . . . . . . . . . . . . . . . . . . . . 155 Dimatec Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 DMC Mining Services . . . . . . . . . . . . . . . . . . . . . . .112 Domeq (1998) Inc. . . . . . . . . . . . . . . . . . . . . . . . . 156 DRA Americas Inc. . . . . . . . . . . . . . . . . . . . . . 43, 110 Dux Machinery Corporation . . . . . . . . . . . . . . . . . 142 Dynapro Equipment Limited . . . . . . . . . . . . . . . . . . 97
www.camese.org
159
H
Hatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Hayden Diamond Bit Industries Ltd. . . . . . . . . . . . 57 Hayward Gordon Ltd. . . . . . . . . . . . . . . . . . . . . . . 100 Headwater Equipment Sales Ltd. . . . . . . . . . . . . 101 Heath & Sherwood . . . . . . . . . . . . . . . . . . . . 101, 125 Henningers Diesel Ltd. . . . . . . . . . . . . . . . . . . . . 156 Hepburn Engineering Inc. . . . . . . . . . . . . . . . . . 24, 87 Hercules Equipment Ltd. . . . . . . . . . . . . . . . . . . . 132 HLS HARD-LINE Solutions Inc. . . . . . . . . . . . . . 156 Horne Conveyance Safety Ltd. . . . . . . . . . . . . . . 156 HSBC Bank Canada . . . . . . . . . . . . . . . . . . . . . . . 156
F
fabrithane Industrial Products Inc. . . . . . . . . . . . . 35 fB Drilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 fedNor International Business Centre . . . . . . . . 156 festo Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 firebridge Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 firwin Corp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 fLSmidth Limited . . . . . . . . . . . . . . . . . . . . . . . . . 143 fondel Chemicals Ltd. . . . . . . . . . . . . . . . . . . . . . .119 fordia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 foremost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 48e Nord International . . . . . . . . . . . . . . . . . . . . . . . 20 fournier Bton Inc. . . . . . . . . . . . . . . . . . . . . . . . . 156 freivokh Technologies . . . . . . . . . . . . . . . . . . . . . 156
I
IBM Global Business Services . . . . . . . . . . . . . . 156 IC Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71, 151 Icefield Tools Corporation . . . . . . . . . . . . . . . . 57, 80 IfG Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 I-GARD Corp.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Industrial Drive Service Inc. . . . . . . . . . . . . . . . . . 156 Industrial Equipment Manufacturing Ltd. . . . . . . . 35 Indutech Canada Limited . . . . . . . . . . . . . . . . . . . . 35 InfoMine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Inproheat Industries Ltd./SubCom. . . . . . . . . . . . . 91 Instrumentation GDD Inc. . . . . . . . . . . . . . . . . . . . . 81 International SOS . . . . . . . . . . . . . . . . . . . . . . . . . 156 ITN Logistics Group . . . . . . . . . . . . . . . . . . . . . . . 138
G
Gekko Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 GEM Systems, Advanced Magnetometers . . . . . 79 Gemcom Software International Inc. . . . . . . . . . . 127 Geodis Wilson Canada Ltd. . . . . . . . . . . . . . . . . . 156 GEO Enterprises Ontario . . . . . . . . . . . . . . . . . . . 156 Geonics Limited . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Geosoft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Geotech Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 Geotemps International . . . . . . . . . . . . . . . . . . . . . 93 Golder Associates Ltd. . . . . . . . . . . . . . . . . . . . . . . 43 Gowling Lafleur Henderson LLP . . . . . . . . . . . . . 156 Greater Sudbury Development Corporation . 11, 21 Gridcom Enterprises Ltd. . . . . . . . . . . . . . . . . . . . 130
J
Jetco Heavy Duty Lighting . . . . . . . . . . . . . . . . . . . 73 JNE Consulting Ltd. . . . . . . . . . . . . . . . . . . . . . . . 150 JVX Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
K
Kinetex Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 KPM Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Kubota Metal Corporation . . . . . . . . . . . . . . . . . . 102
160
www.camese.org
N
National Compressed Air . . . . . . . . . . . . . . . . . . . 156 Nelmaco Eastern Ltd. . . . . . . . . . . . . . . . . . . . . . . 147 NitroLube Canada Inc. . . . . . . . . . . . . . . . . . . . . . 156 NL Technologies . . . . . . . . . . . . . . . . . . . . . . . 26, 122 NOMADiQ Shelter Solutions Inc. . . . . . . . . . . . . 30 Norcast Wear Solutions . . . . . . . . . . . . . . . . . . . . 104 NORCAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 Nordic Mine Technology . . . . . . . . . . . . . . . . . . . . 147 Norfab Metal and Machine . . . . . . . . . . . . . . . . . 148 Normac Adhesive Products Inc. . . . . . . . . . . . . . . 75 North Bay Plastic Molders Ltd. . . . . . . . . . . . . . . 104 Norwest Corporation . . . . . . . . . . . . . . . . . . . . . . . 44 Novaflex Group . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
M
Mackwood Mine Services . . . . . . . . . . . . . . . . . . . 18 MacLean Engineering . . . . . . . . . . . . . . . . . . . . . . 143 Major Drilling Group International Inc. . . . . . . . . . 50 Major Wire Industries Limited . . . . . . . . . . . . . . . 103 Manitoulin Group of Companies . . . . . . . . . . . . . 137 Manufacture Adria Inc. . . . . . . . . . . . . . . . . . . . . . . 64 Marac Enterprises Inc. . . . . . . . . . . . . . . . . . . . . . 156 Marcotte Mining Machinery Services Inc. . . . . . 144 Marland Enterprises Inc. . . . . . . . . . . . . . . . . . . . . .114 McCague Borlack LLP . . . . . . . . . . . . . . . . . . . . . . 91 McCloskey International Ltd. . . . . . . . . . . . . . . . . 103 McDowell Group of Companies . . . . . . . . . . . . . 156 MDA, Space Missions Group . . . . . . . . . . . . 25, 115 MegaDomeNL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 MegaResistors Corp. . . . . . . . . . . . . . . . . . . . . . . . 65 Met-Chem Canada Inc. . . . . . . . . . . . . . . . . . . . . . . 42 MicroMentis Inc. . . . . . . . . . . . . . . . . . . . . . . . . . .116 Micromine North America . . . . . . . . . . . . . . . . . . 156 Miller Technology Inc. . . . . . . . . . . . . . . . . . . . . . . 145 Mincon Mining Equipment Inc. . . . . . . . . . . . . . . . 58 Mine Cable Services Corp. . . . . . . . . . . . . . . . . . . 65 Mine Design Technologies . . . . . . . . . . . . 84, 86, 116 Mine Radio Systems Inc. . . . . . . . 26, 120, 145, IBC MinePros Personnel Inc. . . . . . . . . . . . . . . . . . . . . 156 Minesteel fabricators Limited . . . . . . . . . . . . . . . 146 Mining Association of Canada (MAC) . . . . . . . . . 21 Mining Suppliers Association of B.C. . . . . . . . . . 22 Mining Technologies International Inc. . . . . . . . . . 58 MIRARCO-Mining Innovation . . . . . . . . . . . . . . . . 44 Mobile Parts Inc. . . . . . . . . . . . . . . . . . . . . . . 132, 146 Montali Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 113 Morgan Industrial Supply Ltd. . . . . . . . . . . . . . . . 133 Motion Metrics International Corp. . . . . . . . . . . . .117 Multi-Power Products Ltd. . . . . . . . . . . . . . . . . . . . 59 Multiurethanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
O
Optech Incorporated . . . . . . . . . . . . . . . . . . . . . . .117 Orbit Garant Drilling Inc. . . . . . . . . . . . . . . . . . . . 157 ORO Design & Manufacturing Ltd. . . . . . . . . . . . 133
P
Pacific Bit of Canada Inc. . . . . . . . . . . . . . . . . . . . . 60 Pacific Overseas forwarding Inc. . . . . . . . . . . . . 157 Pacific Rim Engineered Products Ltd. . . . . . . . . 157 Parts HeadQuarters Inc. . . . . . . . . . . . . . . . . . . . . 60 Patton & Cooke Co. . . . . . . . . . . . . . . . . . . . . . . . 157 Penguin Automated Systems Inc. . . . . . . . . . . . . . 27 Peninsula Alloy Inc. . . . . . . . . . . . . . . . . . . . . . . . . . 37 Phoenix Geophysics Ltd. . . . . . . . . . . . . . . . . . . . . 81 Piteau Associates . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Polar Mobility Research Ltd. . . . . . . . . . . . . . . . . 129 Polycorp Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Praetorian Construction Management . . . . . . 92, 96 Precisioneering Ltd. . . . . . . . . . . . . . . . . . . . . . . . 106 P.R. Engineering Limited . . . . . . . . . . . . . . . 106, 111 PRINOTH Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Process Research ORTECH Inc. . . . . . . . . . . . . 157 Prospectors and Developers Association of Canada (PDAC) . . . . . . . . . . . . . 22 Protec Epoxies Canada . . . . . . . . . . . . . . . . . . . . 106
www.camese.org
161
T
Technosub Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Tega Industries Canada Inc. . . . . . . . . . . . . . . . . 107 Terraquest Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Terra Remote Sensing Inc. (TRSI) . . . . . . . . . . . . 157 TESC Contracting Company . . . . . . . . . . . . . . . . . 96 The Magnes Group . . . . . . . . . . . . . . . . . . . . . . . . . 90 The Northern Miner . . . . . . . . . . . . . . . . . . . . . . . . . 90 The Pritchard Group . . . . . . . . . . . . . . . . . . . . . . . . 61 THISTLE Underwriting Services Ltd. . . . . . . . . . 121 3M Global Mining & Mineral Extraction . . 66, 74, 123 Tim McDowell Equipment Ltd. . . . . . . . . . . . . . . . 157 Timberland Equipment Limited . . . . . . . . . . . . . . . 88 Topax Export Packaging Systems . . . . . . . . . . . . . 48 Toronda Heavy Industry Co., Ltd. . . . . . . . . . . . . 135 Tramac Equipment Ltd. . . . . . . . . . . . . . . . . . . 62, 107 Travelex Global Business Payments . . . . . . . . . . . 76 Trendway Transportation Services Inc. . . . . . . . . 157 Trident Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
S
Safari Diamond Bits Ltd. . . . . . . . . . . . . . . . . . . . . . 61 SafeComm Electronic Controls Inc. . . . . . . . . . . 157 Sander Geophysics Ltd. (SGL) . . . . . . . . . . . . . . . 82 Saskatchewan Research Council . . . . . . 18, 72, 119 Savino del Bene Corp. (Canada) . . . . . . . . . . . . 157 Scotiabank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 SEI Industries Ltd. . . . . . . . . . . . . . . . . . . . . . . . 71, 77 Seprotech Systems Inc. . . . . . . . . . . . . . . . . . . . . 157 Shaw Almex Industries . . . . . . . . . . . . . . . . . . . . . . 37 Simlog Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Simsmart Technologies . . . . . . . . . . . . . . . . . . . . 157 SNC-Lavalin Inc. . . . . . . . . . . . . . . . . . . . . . . . 68, 111 Snowden Mining Industry Consultants Inc. . . . . . . . . . . 45, 62, 113, 120, 128 Sphere Drilling Supplies . . . . . . . . . . . . . . . . . . . . 157 Sprung Instant Structures Ltd. . . . . . . . . . . . . . . . 157 Stanco Projects Limited . . . . . . . . . . . . . . . . . . . . 157 Standard Machine . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Staticon Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 STC footwear Inc. . . . . . . . . . . . . . . . . . . . . . . . . 123 Sulzer Metco (Canada) Inc. . . . . . . . . . . . . . . . . . 157
U
Unit Electrical Engineering Ltd. . . . . . . . . . . . . . . 157
V
Valley Blades Limited . . . . . . . . . . . . . . . . . . . 74, 135 Vancouver Gear Works Ltd. . . . . . . . . . . . . . . . . . 157 VariSystems Corp. . . . . . . . . . . . . . . . . . . . . . . . . . 66 Veyance Technologies Canada, Inc. . . . . . . . 38, 135 VIASAT GeoTechnologies Inc. . . . . . . . . . . . . . . . . 85 Vintech Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
W
Wabi Iron & Steel Corp. . . . . . . . . . . . . . . . . . . . . 148 Walden Equipment . . . . . . . . . . . . . . . . . . . . . . . . 107 Wardrop, a Tetra Tech Company . . . . . . . . . . . . . . 46 Watts, Griffis and McOuat Limited . . . . . . . . . . . . 46 Weatherhaven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Wenco International Mining Systems Ltd. . . . . . 127 Westland Environmental Services Inc. . . . . . . . . 157 Westpro Machinery Inc. . . . . . . . . . . . . . . . . . . . . 108 Winsted Group Inc. . . . . . . . . . . . . . . . . . . . . . . . . . 39 World Wide Kiln Services . . . . . . . . . . . . . . . . . . . 75 W. S. TYLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
162
www.camese.org
Collision Prevention Trapped Miner Location Asset Detection and Location Voice Communications Emergency Alerting
www.mineradio.com
2 0 10/2 0 11 c a m e s e c o m p e n d i u m c a n a d i a n m i n i n g t e c h n o l o g y
www.camese.org