Professional Documents
Culture Documents
Electrical Development in Atv Project: BY: Ankit Puri Eee 4 Year ABES Engineering College Team Tachyons
Electrical Development in Atv Project: BY: Ankit Puri Eee 4 Year ABES Engineering College Team Tachyons
BY: Ankit Puri EEE 4th Year ABES Engineering College Team Tachyons
Introduction
The EC & EEE Dept. Of the Team is responsible for all the electronic and electrical component, circuit, designing, and testing of them all. In this repot there are some topics, works, components, and processes related to electronic and electricals that are to be executed for the sucessful completion of the project.
Main Component
1. Previous work done on the vehicle in department. 2. Previous mechanism/Components assembled. 3. Suggestion for BAJA 2013. 4. Mechanisms/Components to be used. 5. Specifications of components. 6. Availability 7. Cost of components
Components
S No.
1
Components
Head Lamps
Specification
2 Lamps of 12v/50/60w
Market Availability
Yes
Market/Shop
Kashmere gate Automobile Market, Jama masjid Automobile market -same-same-same-same-same-same-sameKashmere gate Auto mrkt
2 3 4 5 6 7 8 9
Rear lights/Reverse Lights Battery Reverse Alarm Controller Fuses, Switches, Relays Connecting Wires Kill Switch Digital Speedometer
10A
Cost
The Estimated cost for all components may vary market to market
Tools Riquired
Soldering Iron - 20 Watt irons are great for building circuit boards Multi-meter - either digital or analogue (needle on a dial or digital readout). one that measures resistance, continuity and Volts. Solder - resin cored electrical solder is the only way to go. We will need approx 100grams or more. Heat Shrink - great stuff, comes in a range of colors and sizes. Side Cutters - for cutting wire. Heat Shrink Gun or alternative is a cigarette lighter or a hot tool will work. Wire Strippers Long Nose Pliers - used for crimping terminals on before you solder them. Insulation Tape - good quality - 3M etc. Cable Ties - far better solution than taping wire together. More on this later. Wire/Terminals - as required. Will need varying lengths of wire in different colours and thicknesses