Professional Documents
Culture Documents
Polysulphide Sealant Manufacturer
Polysulphide Sealant Manufacturer
Polysulphide Sealant Manufacturer
KANKOL 625P
Features & Benefits Cold applied Pourability & self-leveling UV resistant Flame and fuels resistance Good weatherability
POURING GRADE TWO- PART POLYSULPHIDE SEALANT DESCRIPTION: Kankol 625P is a two-part elastomeric sealant based on a liquid polysulphide polymer which when mixed with accelerator (curing agent) cures by chemical reaction to form a tough, flexible rubber seal. This sealant has excellent Fuel resistance, adhesion to different substrates like masonry, concrete with excellent movement accommodation.
Standards compliance
British Standard BS: 5212:1990-Type FB (Flame and Fuel Resistance) Cold applied Joint Sealant systems for Concrete pavements. Ministry of Road Transport and Highway (MORTH) specification for Roads and Bridge Works Clause 602.2.8 and clause 602.II.4 State that cold applied two part polysulphide sealant shall meet BS: 5212:1990.IRMRA certification
Movement Accommodation: Butt joints (movement in tension and compression): 30 %. Lap Joints (movement in shear): 50 %
Areas of Application
For sealing and maintenance of horizontal joints in
TECHNICAL DATA Colour Pot Life at 25 C Service Temperature Typical Shore A Hardness Cure Rate at 20 C/65 % RH Chemical Resistance 7 days at 20 C in a typical joint. At lower temperatures Cure rate will be slower. Resistant to most dilute acids and alkalis, petrol, diesel, jet fuel and many solvents and vegetable oils. Grey ( After mixing Base and Hardener) Min 2 hrs - 40 C to + 80 C 15 -20
KANKOL 625P
After sealing the joint the tools and equipments should be cleaned immediately with kerosene or any other cleaning solvents/thinners. Packaging KANKOL 625P-Pour Grade 1 KG (approx. 625 ML) 4 KG (approx.2500 ML) 6KG (approx. 3750 ML) KANKOL POROUS PRIMER 250 ML
GUIDE TO KANKOL 625P QUANTITIES Joint Size in mm 5 X5 10 X 5 10 x 10 20 X 10 40 X 20 Health and safety Avoid prolonged contact with skin. If sealant comes into contact with the eyes, flush with cold water and obtain medical attention. Storage Life: 12 months in original unopened packaging stored in a cool, dry place out of direct sunlight Technical Support KANGARU provides technical advisory service supported by teams of specialists in the field. Kg/meter run 0.040 0.080 0.160 0.320 1.28 Meter Run/4kg pack 100 50 25 12.50 3.12