Professional Documents
Culture Documents
Oil Weiller NB65-200 02 0207 Lub Oil
Oil Weiller NB65-200 02 0207 Lub Oil
of Block Design
Series NB
Application
For pumping pure water, industrial water, sea water, condensates, oils, brines, lyes and hot water.
The fluids to be pumped must not contain any abrassive particles nor chemically attack the pump materials.
Main fields of application
In cooling and heating systems, in circulating, water supply,
water treatment, sea-water desalination, dedusting and
spray painting plants as well as in air-conditioning, cooling,
swimming pool and industrial engineering.
Design and series construction
Volute casing centrifugal pump, single entry, single or twostage, of block design. Pump size according to DIN EN 733.
Stub and motor shaft are rigidly coupled together. Shaft bearing in the motor by means of grease-lubricated groove ball
bearings. The mating dimensions of the two-stage sizes
2/25200, 2/32200, 2/40250, 2/50250, except for dimensions f and l depending upon the driving motors, correspond to
the single-stage designs. Volute casing with feet cast on.
Horizontal or vertical installation, motor arrangement downwards is not admissible.
Performance data
Delivery
Delivery head
Temperature of the fluid pumped
Inlet pressure
Pump outlet pressure as a
function of the shaft diameter
and the shaft seal
with diameter 16, 24, 30
with diameter 40
Drive power
Nominal diameter, delivery flange
Q
H
t
ps
pd
pd
P
DNd
up to
up to
up to
480 m3/h
145 m
140 C
up to
16 bar
up to
10 bar
0,25 up to 37 kW
25 up to 150
Branch position/flanges
Suction branch: axial
Delivery branch: radially upwards
Flanges:
up to DN 150 acc. to DIN EN 1092-2 PN 16
as from DN 200 acc. to DIN EN 1092-2
PN 10 / PN16
Contact protection
The requirements of DIN EN 809 Contact protection, are
met.
Shaft seal
By maintenance-free mechanical seal in unbalanced design
(main dimensions acc. to DlN EN 12 756, design K, shape U).
Combination of components
The table on page 3 shows the combination possibilities of
components of all NB sizes. The unit assembly system allows
reduced stock keeping of spare parts.
Explosion protection
The pump fulfils the requirements according to EC
Explosion Protection Directive 94/9EG (ATEX 100a)
for equipment and equipment group II, category 2 G.
Categorisation into temperature classes according to EN
13463-1 depends on the temperature of the pumped medium.
The max. permissible temperature of the pumped medium for
the respective temperature classes are shown in the specific
order data sheet.
Note: In case of the operation of a category 2 pump, the unacceptable heating of the pump surfaces caused by a possible
operational fault must be prevented by a control mechanism.
In case of an operation with constant parameters (pressure,
temperature, speed = const.), a pump performance controller
can be supplied with the pump to detect any operational faults.
Drive
Surface-cooled three-phase squirrel-cage induction motors,
with locating-type bearing, IM V1 type of construction, enclosure IP55 according to IEC Standard, class F insulation,
performances and main dimensions according to DIN EN 50
347, up to 2.2 kW 230/400V, from 3.0 kW 400/690 V.
Attention: Motors provided by customers must also have a
locating-type bearing!
Dismantling the driving unit
When dismantling the driving unit, the volute casing may remain in the piping.
Connections
The following auxiliary connections are always provided:
FD1
Draining
FV1
Venting
optional
FF1 Filling
PM1
Pressure measurement pump
PM2
Pressure measurement pump
inlet pressure plus maximum delivery head must not exceed the admissible
pump outlet pressure
allocation pump size / shaft diameter at the shaft seal, refer to pages
12 to 19
in case the temperature of fluids pumped exceeds 120C, the admissible pump outlet pressure changes as follows:
flange-mounted PN16
flange-mounted PN10
Series NB
Shaft seals with temperature and pressure limits
Available for all material designs
Unbalanced
Internal flushing
Abbreviation
U3D
U3.1D
U 3.9D
Hard carbon,
synthetic resin impregnated
U3.12D
Silicon carbide
Oxide ceramics
Metal parts
U3.20D
Hard carbon,
antimony impregnated
Silicon carbide
CrNiMo steel
CrNiMo steel
O-rings
EPDM
FPM
EPDM
FPM
EPDM
Bellows
EPDM
FPM
BVEGG
BVVGG
Q1Q1EGG
Q1Q1VGG
AQ1EGG
Material key,
DIN EN 12 756
Volute casing centrifugal
pumps at bearing bracket size
Admissible temperature of the fluid pumped (C) and admissible pump outlet pressure pd (bar))
C / bar
single-stage
two-stage
C / bar
C / bar
C / bar
C / bar
100 / 10
100 / 10
100 / 10
100 / 10
140 / 10
100 / 16
100 / 16
100 / 10
100 / 10
140 / 16
Abbreviation system
NB 40 - 200 / 01 / 180 U3D - W3 -
38
/ 300
Series
Size
Hydraulic no.
Actual impeller diameter
Shaft seal
Material design
Stub shaft bore diameter for fixing to motor shaft end
Drive lantern or intermediate ring outside diameter or flange size of electric motor
The actual impeller diameter of two-stage sizes relates to the second stage. The number of stages is placed in front of the nominal width of the outlet branch,
e.g. 2/40200/...
Materials
Material designs
Part No.
Denomination
singlestage
two-stage
W 133
W 134
W 135
W 146
W 149
Volute casing
102...
102...
G-CuAl10Ni
EN-GJS-400-15
EN-GJS-400-15
G-CuAl10Ni
EN-GJS-400-18-LT
Impeller
230...
G-CuAl10Ni
G-CuAl10Ni
EN-GJL-200
GX3CrNiMoCuN25-6-3-3
G-CuAl10Ni
Impeller 1st
stage
Impeller 2nd stage
230...
G-CuAl10Ni
G-CuAl10Ni
EN-GJL-200
GX3CrNiMoCuN25-6-3-3
230...
G-CuAl10Ni
G-CuAl10Ni
EN-GJL-200
GX3CrNiMoCuN25-6-3-3
Diffuser
171...
G-CuAl10Ni
G-CuAl10Ni
EN-GJL-200
GX3CrNiMoCuN25-6-3-3
G-CuAl10Ni
Stage casing
108...
G-CuAl10Ni
EN-GJS-400-15
EN-GJS-400-15
G-CuAl10Ni
EN-GJS-400-18-LT
Casing cover
161...
161...
G-CuAl10Ni
EN-GJS-400-15
EN-GJS-400-15
G-CuAl10Ni
EN-GJS-400-18-LT
Stub shaft
220...
220...
X2CrNiMoN225
X2CrNiMoN225
X2CrNiMoN225
X2CrNiMoN225
X2CrNiMoN225
Drive lantern
341...
341...
EN-GJL-250 oder St
EN-GJL-250 oder St
EN-GJL-250
EN-GJL-250 oder St
EN-GJL-250
Intermediate ring
509.01
G-CuAl10Ni
EN-GJS-400-15
EN-GJS-400-15
G-CuAl10Ni
EN-GJS-400-18-LT
Intermediate ring
509.02
G-CuAl10Ni
EN-GJS-400-15
EN-GJS-400-15
G-CuAl10Ni
EN-GJS-400-18-LT
G-CuAl10Ni
G-CuAl10Ni
Series NB
Combination of components
The following table shows the combination possibilities of components or spare parts of the NB sizes.
Within a vertical column, parts with identical numbers are interchangeable.
Shaft
Pump size
diameter at
NI
the shaft seal
Volute
casing
Impeller
Impeller
1st
stage
Diffuser
Stage
casing
Intermediate
ring
Casing
cover
2nd
stage
25-160
32-125
40-125
50-125
65-125
25-200
32-160
32-200
40-160
10
40-200
11
10
40-250
12
11
50-160
13
12
24
Intermediate
ring
16-14
16-19
16-24
16-28
16-160
16-200
16-250
24-14
24-19
24-24
24-28
24-38
24-42
24-160
24-200
24-250
24-300
24-350
16
Drive
lantern
mm
20-160
Stub shaft
30-19
30
30-200
30-24
30-28
30-250
1
-
30-38
30-300
50-200
14
13
50-250
15
14
65-160
16
15
65-200
17
16
80-160
18
17
100-160
19
18
2/25-200
30-42
30-48
30-400
1
30
zweistufig
2/32-200
30-55
2/40-250
12
2
2
2/50-250
15
65-250
20
19
65-315
21
20
65-400
22
21
80-200
23
22
80-250
24
23
80-315
25
24
30-350
2/30-19
2/30-24
2/30-28
2/30-38
2/30-42
2/30-48
2/30-55
30-200
30-250
30-300
30-350
30-400
40-28
280.180.0
40
26
280.230.20
2
-
100-200
40-38
25
40-42
40-360
100-250
27
26
100-315
28
27
125-200
29
28
125-250
30
29
150-200
31
30
280.250.50
2
40-48
40-55
280.300.50
Series NB
Uncooled, unbalanced mechanical
seal for cavities according to
DIN EN 12 756, design K, form U.
Series NB
Performance graphs
Series NB
Series NB
Sectional drawing
Single-stage sizes with shaft diameter 16 at the shaft seal
Series NB
Sectional drawing
Single-stage sizes with shaft diameters 24 at the shaft seal
depending on
pump size
Series NB
Sectional drawing
Single-stage sizes with shaft diameters 30 at the shaft seal
Casing cover-design
sizes 2/40-250 and 2/50-250
Series NB
Sectional drawing
Sizes with shaft diameter 40 at the shaft seal
10
Series NB
List of components
Denomination
Part-No
Denomination
Part-No
Volute casing
102.01
Hexagonal screw
901.02
Stage casing
108.01
Hexagonal screw
901.10
Casing cover
161.01
Stud bolt
902.01
Casing cover
161.05
Stud bolt
902.08
Diffuser
171.01
Screwed plug
903.01
Stub shaft
220.01
Impeller
230.01
Screwed plug
Screwed plug
903.02
903.03
230.02
Screwed plug
903.04
230.03
Grub screw
904.05
Drive lantern
341.01
914.06
Gasket
400.01
Gasket
914.10
920.01
Joint ring
400.02
411.01
920.03
Joint ring
411.02
Impeller nut
922.01
Joint ring
411.04
Spring washer
930.01
Joint ring
411.05
Key
940.01
O-ring
412.01
Rating plate
971.01
Mechanical seal
Intermediate ring
433.01
502.01
Intermediate ring
509.01
Intermediate ring
509.02
Spacer ring
510.01
Threaded ring
514.01
Spacer sleeve
525.01
Rivet
565.01
Connections
Bleeder screw
Guard plate
686.02
FD1
FF1
FV1
FV1
Drainage
Guard plate
672.01
686.01
Flange-mounted motor
801.01
PM1
Pressure measurement
Hexagonal screw
901.01
PM2
Pressure measurement
Filling
Venting
11
n = 1450/1750 min-1
Series NB
Aggregate dimensions: Sizes with shaft diameters 16, 24 and 30 at the shaft seal
s for screws
Shaft
diameter
at the shaft
seal
Draining
mm
16
24
30
Arrangement
4 holes
DNd
DNs
25
32
40
50
65
80
VentPressure
ing measurement
FD1
FF1
FV1
G 1/4 G 1/4 G 1/8
G 1/4 G 1/4 G 1/4
G 1/4 G 1/4 G 3/8
PM2
G 1/4
G 1/4
G 1/4
bf
115
140
150
165
185
200
16
18
18
20
20
22
85
100
110
125
145
160
14
19
19
19
19
19
No. of
holes
4
4
4
4
4
8
Arrangement
8 holes
Shaft
diameter at
shaft seal
Pump
size
Motor
size
Sense of rotation:
clockwise as seen
from the driving side
Dimensions in mm
without commitment
Performance
Aggregate dimensions
Pump dimensions
Flanges
mm
kW
20-160
16
25-160
32-125
40-125
24
50-125
65-125
25-200
30
2/25-200
12
71
80
71
80
71
80
90 S
71
80
90 S
71
80
90 S
90 L
100 L
71
80
90 S
90 L
100 L
80
90 S
90 L
80
90 S
90 L
100 L
0,25 0,37
0,55 0,75
0,25 0,37
0,55 0,75
0,25 0,37
0,55 0,75
1,1
0,25 0,37
0,55 0,75
1,1
0,25 0,37
0,55 0,75
1,1
1,5
2,2 3
0,25 0,37
0,55 0,75
1,1
1,5
2,2 3
0,55 0,75
1,1
1,5
0,55 0,75
1,1
1,5
2,2 3
DNs DNd
25
25
25
25
50
32
65
40
Feet
a
118
63
138
118
63
138
a2
b1
b2
f1
h1
h2
m1
m2
n1
n2
108 108
112 145
50
14
100
70
100 108
112 160
50
12
100
70
80 148
96
96
112 140
50
15
100
70
80 148
96 110
112 140
50
15
100
70
Extension dim.
a1
160
200
160
200
160
200
62
62
89
160
200
89
160
65
50 100 148
110 130
132 160
50
15
100
70
200
89
250
160
80
65 100 148
120 148
160 180
65
15
125
95
200
95
250
40
25
80 149
40
25
80
183
193
132 132
160 180
50
15
100
70
132 132
160 180
50
15
100
70
200
200
250
102
102
Allocation
stub shaft/
motor bracket/
intermediate
ring
Contained in
abbreviation,
v. page 2
14/160
19/200
14/160
19/200
14/160
19/200
24/200
14/160
19/200
24/200
14/160
19/200
24/200
24/200
28/250
14/160
19/200
24/200
24/200
28/250
19/200
24/200
24/200
19/200
24/200
24/200
28/250
n = 1450/1750 min-1
Pump
size
Motor
size
Aggregate dimensions
Performance
Pump dimensions
Flanges
mm
kW
32-160
80
90 S
0,55 0,75
1,1
90 L
1,5
100 L
32-200
90 L
1,5
90 L
1,5
100 L
80
90 S
90 L
100 L
40-250
2,2
1,1
1,5
2,2
2/40-250
50-160
2,2
50-200
2,2
65-160
124 130
160
180
M12
124 130
160
180
M12
200
102
130 130
132
160
M12
125 135
160
180
200
19/200
24/200
102
28/250
200
19/200
24/200
102
5,5
65 40 100 149
150 156
180
225
200
102
193
238
28/250
24/200
85
150 156
180
225
M12
65 50 100 149
300
28/250
85
123 130
160
180
M12
200
65 50 100 149
133 145
160
200
42/350
102
200
19/200
24/200
132 S
132 M
5,5
7,5
11
2,2
112 M
132 S
4
5,5
132 M
7,5
160 M
11
160 L
80
15
0,55 0,75
90 S
1,1
90 L
1,5
2,2
102
38/300
24/200
28/250
250
-
156 169
180
225
M 12
24/200
28/250
28/250
300
200
65 50 100
24/200
28/250
250
149
19/200
24/200
250
M12
204
38/300
38/300
350
24/200
28/250
28/250
28/250
250
-
24/200
24/200
28/250
250
112 M
24/200
24/200
28/250
102
M12
1,5
2,2
24/200
28/250
250
1,1
3
24/200
250
M12
274
1,5
24/200
28/250
0,55 0,75
2,2
Contained in
abbreviation,
v. page 2
19/200
24/200
250
250
132 S
112 M
M12
a1
19/200
65 40 100
1,5
2,2
100 L
250
112 M
100 L
n2
Allocation
stub shaft/
motor
bracket/
intermediate
ring
19/200
0,55 0,75
1,1
160 M
2/50-250
2,2
80
90 S
90 L
160
m1 m2 n1
11
100 L
50-250
160 M
90 L
132
200
5,5
100 L
7,5
80
h2
193
65 40 100 149
132 M
90 S
h1
200
132 S
90 L
130 130
f1
1,1
1,5
100 L
50 32 80
183
65 40 80 149
1,1
1,5
112 M
30
b2
0,55 0,75
90 S
110 L
112 M
b1
0,55 0,75
100 L
50 32 80 149
112 M
90 L
50 32 80 149
a2
0,55 0,75
1,1
80
40-200
2,2
80
90 S
90 S
90 L
0,55 0,75
1,1
100 L
40-160
2,2
80
90 S
100 L
2/32-200
DNs DNd a
Feet
Extension dim.
Shaft
diameter at
shaft seal
Series NB
85
28/250
204
300
38/300
38/300
219
350
42/350
193
250
65 50 100 238
156 169
180
225
M12
300
28/250
85
42/350
19/200
200
80 65 100 149
3
4
The motor dimensions as indicated are approximate dimensions. Exact data depend on the motor make.
133 162
160
200
M12
24/200
102
250
38/300
42/350
350
274
28/250
38/300
24/200
28/250
28/250
When using special motors, make sure that other performances are allocated to the individual sizes, depending upon the enclosure. The main dimensions change accordingly. In
case of order, binding tables of motor dimensions must be supplied to us.
Flanges processed according to DIN 1092-2 PN 10/16. (Flange outer diameter D and thickness bf can exceed the standard dimensions.)
VM 528 GB/2012.06 Ident No. 795 261
13
n = 1450/1750 min-1
Series NB
Aggregate dimensions: Sizes with shaft diameter 30 and 40 at the shaft seal
s for screws
Flanges:
DN 150 acc. to DIN EN 1092-2 PN 16
DN 200 acc. to DIN EN 1092-2 PN 10
DNd
D
bf
k
L
DNs
65
185
20
145
19
80
200
22
160
19
100
220
24
180
19
125
250
26
210
19
150
285
26
240
23
200
340
26
240
23
200
340
30
295
23
Sense of rotation:
clockwise as seen from the driving side
Connections
Draining
Filling
VentPressure
ing measurement
mm
FD1
FF1
FV1
PM2
30
G 1/4
G 1/4
G 1/4
G 1/4
40
G 3/8
G 3/8
G 3/8
G 3/8
Shaft
diameter at
shaft seal
Pump
size
Motor
size
Performance
14
Arrangement
8 holes
Pump dimensions
mm
40
No. of
holes
4
8
8
8
8
8
12
Aggregate dimensions
Flanges
30
Arrangement
4 holes
90 S
90 L
100 L
65-200
112 M
132 S
132 M
80
90 S
90 L
80-160 100 L
112 M
132 S
132 M
90 S
90 L
100 L
100-160
112 M
132 S
132 M
100 L
112 M
132 S
65-250 132 M
160 M
160 L
180 M
112 M
132 S
132 M
160 M
65-315
160 L
180 M
180 L
200 L
kW
1,1
1,5
2,2 3
4
5,5
7,5
0,55 0,75
1,1
1,5
2,2 3
4
5,5
7,5
1,1
1,5
2,2 3
4
5,5
7,5
2,2 3
4
5,5
7,5
11
15
22
4
5,5
7,5
11
15
18,5
22
30
DNs DNd a
Feet
f
a2
b1
b2
f1
h1
h2
m1 m2
n1
n2
Extension dim.
Shaft
diameter
at the shaft
seal
250
149
80 65 100
148 170
180 225
65
204
250
85
300
200
149
100 80 125
136 170
180 225
65
204
250
102
300
200
149
125 100 125
80 65 100
165 200
200 280
65
250
204
300
261
250
281
80
311
300
250
281
300
360 202 219 261 225 280
311
123
350
261
80 65 125
102
80
105
350
400
Allocation
stub shaft/
motor bracket/
intermediate ring
Contained in
abbreviation,
v. page 2
24/200
24/200
28/250
28/250
38/300
38/300
19/200
24/200
24/200
28/250
28/250
38/300
38/300
24/200
24/200
28/250
28/250
38/300
38/300
28/250
28/250
38/300
38/300
42/350
42/350
48/350
28/250
38/300
38/300
42/350
42/350
48/350
48/350
55/400
n = 1450/1750 min-1
Pump
size
Motor
size
Aggregate dimensions
Performance
Pump dimensions
Flanges
mm
kW
65-400
80-200
80-250
80-315
100-200
40
100-250
100-315
125-200
125-250
150-200
132 M
160 M
160 L
180 M
180 L
200 L
100 L
112 M
132 S
132 M
160 M
112 M
132 S
132 M
160 M
160 L
180 M
180 L
200 L
132 S
132 M
160 M
160 L
180 M
180 L
200 L
100 L
112 M
132 S
132 M
160 M
160 L
112 M
132 S
132 M
160 M
160 L
180 M
180 L
200 L
132 M
160 M
160 L
180 M
180 L
200 L
132 M
160 M
160 L
180 M
180 L
200 L
132 M
160 M
160 L
180 M
180 L
200 L
132 M
160 M
160 L
180 M
180 L
200 L
7,5
11
15
18,5
22
30
2,2 3
4
5,5
7,5
11
4
5,5
7,5
11
15
18,5
22
30
5,5
7,5
11
15
18,5
22
30
2,2 3
4
5,5
7,5
11
15
4
5,5
7,5
11
15
18,5
22
30
7,5
11
15
18,5
22
30
7,5
11
15
18,5
22
30
7,5
11
15
18,5
22
30
7,5
11
15
18,5
22
30
DNs DNd
Feet
a
a2
b1
b2
f1
h1
h2
m1 m2
n1
n2
281
80
65 125
311
Extension dim.
Shaft
diameter
at shaft
seal
Series NB
a1
300
360 239 255 261 250
355
80
M16
350
105
400
261
100 80 125
281
250
360 163 188 261 180
250
65
M12
300
311
261
350
250
281
300
100 80 125
280
80
M16
123
123
350
311
400
281
100 80 125
300
360 210 231 261 250
315
80
M16
311
350
105
400
261
250
280
80
M16
311
350
261
250
281
300
280
80
M16
315
80
M16
311
315
80
M16
311
355
80
M16
311
350
143
350
143
400
300
281
200 150 160
112
400
300
281
150 125 140
350
400
300
281
150 125 140
133
400
300
281
311
133
350
311
300
The motor dimensions as indicated are approximate dimensions. Exact data depend on the motor make.
370
M20
350
143
400
Allocation
stub shaft/
motor bracket/
intermediate ring
Contained in
abbreviation,
v. page 2
38/300
42/350
42/350
48/350
48/350
55/400
28/250
28/250
38/300
38/300
42/350
28/250
38/300
38/300
42/350
42/350
48/350
48/350
55/400
38/300
38/300
42/350
42/350
48/350
48/350
55/400
28/250
28/250
38/300
38/300
42/350
42/350
28/250
38/300
38/300
42/350
42/350
48/350
48/350
55/400
38/300
42/350
42/350
48/350
48/350
55/400
38/300
42/350
42/350
48/350
48/350
55/400
38/300
42/350
42/350
48/350
48/350
55/400
38/300
42/350
42/350
48/350
48/350
55/400
When using special motors, make sure that other performances are allocated to the individual sizes, depending upon the enclosure. The main dimensions change accordingly. In
case of order, binding tables of motor dimensions must be supplied to us.
Flanges processed according to DIN 1092-2 PN 10/16. (Flange outer diameter D and thickness bf can exceed the standard dimensions.)
VM 528 GB/2012.06 Ident No. 795 261
15
1450/1750 min-1
n = 2900/3500
Series NB
Aggregate dimensions: Sizes with shaft diameter 16, 24 and 30 at the shaft seal
s for screws
Shaft
diameter
at the shaft
seal
Arrangement
4 holes
Connections
Draining
Filling
VentPressure
ing measurement
mm
FD1
FF1
FV1
PM2
16
G 1/4
G 1/4
G 1/8
G 1/4
24
G 1/4
G 1/4
G 1/4
G 1/4
30
G 1/4
G 1/4
G 3/8
G 1/4
DNd
DNs
25
32
40
50
65
bf
115
140
150
165
185
16
18
18
20
20
85
100
110
125
145
14
19
19
19
19
No. of
holes
4
4
4
4
4
Arrangement
8 holes
Motor
size
Performance
Aggregate dimensions
Pump dimensions
Flanges
mm
kW
20-160
16
25-160
32-125
24
40-125
50-125
16
80
90 S
90 L
100 L
112 M
80
90 S
90 L
100 L
112 M
80
90 S
90 L
100 L
112 M
132 S
80
90 S
90 L
100 L
112 M
132 S
90 S
90 L
100 L
112 M
132 S
160 M
0,75 1,1
1,5
2,2
3
4
0,75 1,1
1,5
2,2
3
4
0,75 1,1
1,5
2,2
3
4
5,5 7,5
0,75 1,1
1,5
2,2
3
4
5,5 7,5
1,5
2,2
3
4
5,5 7,5
11 15
DNs DNd
Feet
a
a2
b1
b2
f1
h1
h2
m1 m2
n1
n2
138
25
25
63
108 108
112 145
50
63
M10
62
250
138
25
a1
200
148
25
Extension dim.
Shaft
diameter
at shaft
seal
Sense of rotation:
clockwise as seen from the driving side
200
-
100 108
112 160
50
M10
148
62
250
200
50
32
80
148
96
96
112 140
50
M12
89
250
188
300
200
65
40
80
148
96 110
112 140
50
M12
89
250
188
300
200
148
65
50 100
188
223
110 130
132 160
50
M12
250
300
350
89
Allocation
stub shaft/
motor bracket/
intermediate
ring
Contained in
abbreviation,
v. page 2
19/200
24/200
24/200
28/250
28/250
19/200
24/200
24/200
28/250
28/250
19/200
24/200
24/200
28/250
28/250
38/300
19/200
24/200
24/200
28/250
28/250
38/300
24/200
24/200
28/250
28/250
38/300
42/350
n = 2900/3500 min-1
Pump
size
Motor
size
Performance
Aggregate dimensions
Pump dimensions
Flanges
mm
24
kW
65-125
25-200
2/25-200
32-160
32-200
2/32-200
30
40-160
40-200
40-250
2/40-250
50-160
90 L
100 L
112 M
132 S
160 M
160 L
100 L
112 M
132 S
160 M
112 M
132 S
160 M
160 L
100 L
112 M
132 S
160 M
100 L
112 M
132 S
160 M
160 L
180 M
112 M
132 S
160 M
160 L
180 M
200 L
100 L
112 M
132 S
160 M
160 L
100 L
112 M
132 S
160 M
160 L
180 M
200 L
132 S
160 M
160 L
180 M
200 L
160 M
160 L
180 M
200 L
100 L
112 M
132 S
160 M
160 L
180 M
2,2
3
4
5,5 7,5
11 15
18,5
3
4
5,5 7,5
11 15
4
5,5 7,5
11 15
18,5
3
4
5,5 7,5
11 15
3
4
5,5 7,5
11 15
18,5
22
4
5,5 7,5
11 15
18,5
22
30 37
3
4
5,5 7,5
11 15
18,5
3
4
5,5 7,5
11 15
18,5
22
30 37
5,5 7,5
11 15
18,5
22
30 37
11 15
18,5
22
30 37
3
4
5,5 7,5
11 15
18,5
22
DNs DNd
Feet
a
a2
b1
b2
f1
h1
h2
m1 m2
n1
n2
Extension dim.
Shaft
diameter
at shaft
seal
Series NB
a1
200
148
80 65 100
188
250
-
120 148
160 180
65
223
350
149
40 25
80
40 25
80
204
219
193
238
250
-
132 132
160 180
50
132 132
160 180
50
274
80
204
219
50 32
80
204
130 130
132 160
50
300
350
102
102
250
-
124 130
160 180
50
300
219
350
193
238
250
300
80
102
250
-
149
50 32
300
350
250
300
350
149
50 32
95
300
124 130
160 180
50
274
350
102
102
400
149
65 40
80 204
250
-
130 130
132 160
50
219
250
204
300
-
125 135
160 180
50
102
350
219
400
300
204
219
102
350
149
65 40 100
65 40 100
300
150 156
180 225
65
350
85
400
65 40 100 274
150 156
180 225
65
350
85
400
65 50 100
149
250
204
300
219
123 130
160 180
50
102
350
Allocation
stub shaft/
motor bracket/
intermediate
ring
Contained in
abbreviation,
v. page 2
24/200
28/250
28/250
38/300
42/350
42/350
28/250
28/250
38/300
42/350
28/250
38/300
42/350
42/350
28/250
28/250
38/300
42/350
28/250
28/250
38/300
42/350
42/350
48/350
28/250
38/300
42/350
42/350
48/350
55/400
28/250
28/250
38/300
42/350
42/350
28/250
28/250
38/300
42/350
42/350
48/350
55/400
38/300
42/350
42/350
48/350
55/400
42/350
42/350
48/350
55/400
28/250
28/250
38/300
42/350
42/350
48/350
When using special motors, make sure that other performances are allocated to the individual sizes, depending upon the enclosure. The main dimensions change accordingly. In
case of order, binding tables of motor dimensions must be supplied to us.
Flanges processed according to DIN 1092-2 PN 10/16. (Flange outer diameter D and thickness bf can exceed the standard dimensions.)
17
n = 2900/3500 min-1
Series NB
Aggregate dimensions Sizes with shaft diameters 30 and 40 at the shaft seal
s for screws
Shaft
diameter
at the shaft
seal
Filling
VentPressure
ing measurement
FF1
FV1
DNd
DNs
bf
No. of
holes
50
65
165
185
20
20
125
145
19
19
4
4
mm
FD1
PM2
80
200
22
160
19
30
G 1/4
G 1/4 G 1/4
G 1/4
100
220
24
180
19
40
G 3/8
G 3/8 G 3/8
G 3/8
125
250
26
210
19
Arrangement
4 holes
Arrangement
8 holes
Motor
size
clockwise as seen
from the driving side
Performance
Dimensions in mm
without commitment
Aggregate dimensions
Pump dimensions
Flanges
mm
kW
50-200
50-250
30
2/50-250
65-160
65-200
18
112 M
132 S
160 M
160 L
180 M
200 L
132 S
160 M
160 L
180 M
200 L
160 M
160 L
180 M
200 L
112 M
132 S
160 M
160 L
180 M
200 L
132 S
160 M
160 L
180 M
200 L
DNs DNd
Feet
a
4
5,5 7,5
11 15
18,5
22
30 37
5,5 7,5
11 15
18,5
22
30 37
11 15
18,5
22
30 37
4
5,5 7,5
11 15
18,5
22
30 37
5,5 7,5
11 15
18,5
22
30 37
a2
b1
b2
f1
h1
h2
m1 m2
n1
n2
149
204
65
50 100
133 145
160 200
50
219
350
102
400
300
204
50 100
a1
250
300
219
65
Extension dim.
Shaft
diameter at
shaft seal
Sense of rotation:
156 169
180 225
65
350
85
400
65
50 100 274
156 169
180 225
65
65 100
133 162
160 200
65
219
65 100
219
350
102
400
300
204
80
85
400
250
300
149
204
80
350
148 170
180 225
65
350
400
85
Allocation
stub shaft/
motor bracket/
intermediate ring
Contained in
abbreviation,
v. page 2
28/250
38/300
42/350
42/350
48/350
55/400
38/300
42/350
42/350
48/350
55/400
42/350
42/350
48/350
55/400
28/250
38/300
42/350
42/350
48/350
55/400
38/300
42/350
42/350
48/350
55/400
n = 2900/3500 min-1
Pump
size
Motor
size
Performance
Aggregate dimensions
Pump dimensions
Flanges
kW
mm
80-160
30
100-160
65-250
40
80-200
100-200
112 M
132 S
160 M
160 L
180 M
200 L
132 S
160 M
160 L
180 M
200 L
160 L
180 M
200 L
160 M
160 L
180 M
200 L
160 M
160 L
180 M
200 L
DNs DNd a
4
5,5 7,5
11 15
18,5
22
30 37
5,5 7,5
11 15
18,5
22
30 37
18,5
22
30 37
11 15
18,5
22
30 37
11 15
18,5
22
30 37
Feet
f
a2
b1
b2
f1
h1
h2
m1 m2
n1
n2
149
204
100 80 125
136 170
180 225
65
350
102
400
300
204
219
a1
250
300
219
Extension dim.
Shaft
diameter at
shaft seal
Series NB
165 200
200 280
65
350
102
400
80
80
350
123
400
100 80 125 311 360 163 188 261 180 250
65
350
123
400
125 100 125 311 360 165 203 261 200 280
80
350
133
400
Allocation
stub shaft/
motor bracket/
intermediate
ring
Contained in
abbreviation,
v. page 2
28/250
38/300
42/350
42/350
48/350
55/400
38/300
42/350
42/350
48/350
55/400
42/350
48/350
55/400
42/350
42/350
48/350
55/400
42/350
42/350
48/350
55/400
When using special motors, make sure that other performances are allocated to the individual sizes, depending upon the enclosure. The main dimensions change accordingly. In case
of order, binding tables of motor dimensions must be supplied to us.
Flanges processed according to DIN 1092-2 PN 10/16. (Flange outer diameter D and thickness bf can exceed the standard dimensions.)
19
Series NB
ALLWEILER GmbH
Postfach 1140 78301 Radolfzell
Allweilerstr. 1 78315 Radolfzell
Germany
Tel. +49 (0)7732 86-0
Fax. + 49 (0)7732 86-436
E-Mail: service@allweiler.de
Internet: http://www.allweiler.com
VM 528 GB/2012.06 Ident No. 795 261