Professional Documents
Culture Documents
CooLite 1 AW
CooLite 1 AW
1 2 3
High energy savings on lighting loads Compact Automatic / Manual savings selection
Coolite 1
Coolite 2
Coolite 3
Automatic savings selection from 6kVA to 120kVA Benefits: n High energy savings on lighting loads - upto 30%* direct savings, cooler lamp operation especially with all types of discharge lamps n Filters harmonics injected to the line by electronic lighting ballasts and reduces spikes in lighting circuits n Enables PF improvement n Safe and flicker free lamp startup (Coolite 3) n Reduction in maximum demand, energy consumption Spot and remote monitoring of power and energy through digital multifunction meter with communication n Tax benefits for energy saving investments and 80% depreciation in the first year in India as per section 32 of the Income Tax Act 1961 n Automatic operation enables reduction in manpower
* Savings depending on the site conditions & models selected. ** Power required by Air conditioner to take care of heat generated by 60 kW lighting load *** When lighting load is operating in Air conditioned spaces
How do we do this?
Perceived Light (%)
100
80
Measured Light (%)
60
Gas-discharge Lamp
Fluorescent, Metal Halide
Incandescent Lamp
40
20
Power (W)
n The Lumen curve saturates n 15% Power Reduction gives only 5% Lumen reduction for Discharge Lamps - Eye cannot perceive < 50 Lux change in 250 Lux Fluorescent lamps do not have a linear Lumens-Watts curve. i.e, the increased power will not give you a proportional increase in light output (lumens). See graph above. Conversely, slightly reducing the power supplied does not reduce the light output proportionally. This is the basic principle the Coolite utilizes. Thus, a 15% reduction in wattage supplied to a typical 4-foot tube light would result in a measured lumens reduction of approx 5% and a perceived reduction in brightness of just 2% because the pupil of the human eye enlarges to allow more light into eye, making the light appear brighter. The Coolite is introduced into start of the lighting line. It uses a network of impedances (inductors and capacitors along with an electronic control board, which dont draw Watts) to improve the matching of lamp impedance to the line. This optimizes power supply to the lamps thereby saving energy without noticeable drop in lumens. A car transmission is an example of fuel saving via impedance matching between the engine and drive wheels. Another example of impedance matching, is a crossover network which optimizes power transfer from the amplifier to HiFi speakers without it the speakers may overload and burn out. Naturally, the Coolite is tuned to the Lumen-Watt curve of modern commercial lighting systems, typically using energy efficient fluorescent, gas-discharge and metal halide lamps. Older technologies such as Incandescents and halogens, while still being compatible and operable via the Coolite, have a more linear lumens characteristic, resulting in a greater drop in lumens than their fluorescent counterparts. The lighting loads need to be on a dedicated supply line, as is the practice in large facilities. The occasional air conditioner on the line may not present a problem and has been observed to yield a 10% energy saving. However, computer CPUs, UPS and other loads should not be connected to the same lighting supply line.
Coolite Cannot Be
n Dimmer - Coolite is meant to be used for energy saving without noticeable drop in lumen - Saving merely through dimming is not an objective of Coolite n Stabilizer - Works on impedence matching principle & enables saving in lighting energy. Not a voltage stabilizer.
Coolite 1 & 2
Application Suitable for stabilized lighting circuits in: n Commercial buildings and complexes n Service industry - Hotels, Hospitals, Cinema halls, BPOs n Public utilities - Auditoriums, Stadiums, Educational Institutions n Residential buildings and apartments n Campus lighting in large industrial and commercial establishments n All industrial facilities Features: User selectable settings to suit site conditions l Coolite 1 - % Energy savings - approx 10%, 15% & 20% l Coolite 2 - % Energy savings - approx 12% & 20% n Spot check savings with Power & Energy Monitor n LED Load Status Monitors with alarm relay output for low & high voltage n LED indications for Save and Bypass modes easy identification of mode of running n Short circuit and overload protection to lighting circuits, which often get overloaded as facilities expand n Short circuit protection through fuses at the output side even in Bypass mode (Coolite 2) n Manual bypass provision for breakdown isolation (Coolite 2) n 2mm thick CRCA sheet steel fabricated enclosure
> Coolite 1
Models
KVA Overall Dimension W x H x D mm 275 x 600 x 255 Floor/Trench Mounting dimensions W x D mm* 215 x 194 Weight (gross) Kg approx 42 52 62 400 x 850 x 305 240 x 245 65 70 75 275 x 600 x 485 215 x 410 55 62 62 400 x 850 x 585 340 x 510 90 100 105 110 150 150 970 x 1300 x 830 880 x 740 475 510 625 700 780
> Coolite 2
Supply type Recommended Voltage Mode of operation Ambient Temperature Application Standards Insulation Protections Power & Energy Monitoring option Phase Indication Cable terminations Mounting Coolite 1 1 phase 1 phase (2 wire) /3 phase (4 wire) 240 (220 to 260) VLN, 1 ph 415 (380 to 450) VLL, 3 ph Continuous -5 to +60deg C Operating -25 to +70deg C Storage Indoor Coolite 1 3 phase Major components complies with IS/ IEC/ UL standards 2.5 kV Line to Earth Short circuit and Overload protection through MCB / MCCB 3 Phase models - EM 6436 with RS 485 factory fitted meter 1 Phase models ELF3234_3 meter Coolite 2 3 phase LED Load Status Monitor blink on over / under voltage Bottom entry gland plate, heavy duty terminals, brass earthing Floor / Trench (Wall or Caster mounting Optional)
Coolite 3
Application n Outdoor lighting in l Large industries l Resorts, clubs and amusement parks l Airports, shipyards, railway stations and bus stands l Municipal street lights, building architectural lighting l Highway lighting and toll collection plazas l Large commercial hoarding, illuminated AD boards n Also suitable for indoor lighting applications Features: n Microcontroller based automatic savings selection depending on input line conditions - Optimum at any given time n Provision for user-selectable savings n Manual bypass protection for system isolation l Auto bypass for low voltage conditions & auto shut down for extreme low voltage. n Short circuit and overload protection n Status Monitor l Line - Indicates individual phases l Savings - Indicates % savings l Function - Indicates operational modes Bypass, Auto, Sensor, Remote, Reset, Timer, Manual, and OFF - Alarm relay output for malfunctioning with reset indication n Load Control Module l Real Time based Load control - Programmable 4 time slots per day for a week. (Optional) n Guarantees prompt & timely functioning of lamps l Plinth mounting l CRCA sheet steel fabricated, IP55 enclosure
> Coolite 3
Supply type Recommended Voltage Auto shutdown voltage Lamp warmup time Output Voltage at recommended input voltage Mode of operation Ambient Temperature* Application Standards Protection against dust & water Insulation Protections Power & Energy Monitoring option Phase Indication Cable terminations Mounting
3 phase (4 wire) 240 (220 to 260) VLN, 1 ph 415 (380 to 450) VLL, 3 ph 140 VLN 15 minutes 200 to 210 VLN Continuous -5 to +60deg C Operating -25 to +70deg C Storage Outdoor Coolite 3 3 Phase Major components complies with IS/ IEC/ UL standards IP55 2.5 kV Line to Earth Short circuit and Overload protection through MCB / MCCB EM 6436 with RS 485 factory fitted meter LED Load Status Monitor blink on over / under voltage Bottom entry gland plate, heavy duty terminals, brass earthing Plinth Mounting
Models
KVA Rating 6 12 18 24 30 36 45 54 63 72 81 90 99 111 120 480 x 910 x 840 355 x 690 x 690 Dimension W x H x D mm
Note: * With load control module option the operating temperature is -5 to 55 C (23 to 131 F)
Coolite questionnaire
Fill this form & send to in-care@in.schneider-electric.com or contact the nearest Schneider Electric office. (refer our website for contact details). 1. Customer Contact
Name* Designation* Organisation* Country* e-mail* Phone* Fax Address* :
Fields marked * are mandatory
2. Coolite Requirements
Power Source Dedicated Supply line for lighting* Self generated Source Yes E.B./Other No
Total kW
NOTE : Dedicated line for lighting load is a must to install and use Coolite
Minimum
Average
Maximum
UPS OLTC Stabilizer None 240 (220 to 260) VLN, 1 ph 415 (380 to 450) VLL, 3 ph
Note : Indicated savings are directly proportional to the stabilized voltage supply
Power factor* Present Harmonic Levels % THD Average No. of power interruption per day Input for saving Calculation Power Tariff*
Lighting line*
Main line
Sl No. 1 2 3
1Ph /3Ph
Total kVA
Self generated
4
Note : Balanced load ensures better savings from Coolite n Select your Coolite models in the table overleaf n Measure the load current within 5 minutes after switching ON
Schneider Electric Conzerv India Pvt Ltd. 44P Electronic City East Phase Hosur Road, Bangalore 560 100 INDIA P +91 80 3910 2730, F +91 80 3910 2735 E contact@conzerv.com Customer Care Centre: Toll-free numbers: 1800 180 1707, 1800 103 0011, General number: 0124 4222040 Email: in-care@in.schneider-electric.com