Professional Documents
Culture Documents
S1691 Tribology at Sea - Web1-1
S1691 Tribology at Sea - Web1-1
Following the success of our first seminar, the Tribology Group has decided to organise a second event in the Tribology at Sea series.
Tribology at Sea 2012 addresses a range of themes associated with marine operations, including selection, design and operation of powertrain components, condition monitoring of powertrain, the behaviour and management of marine lubricants and approaches to reduce bio-fouling. WHEN WHERE This is your chance to extend your knowledge base on the latest tribological techniques and experience on microfluidics, oil stress and lubrication of two and four stroke marine engines, composite materials for seals and bearings, among other topics.
BENEFITS OF ATTENDANCE
Covering a broad range of tribological marine applications in-depth Including discussion from Lloyds Register representative Current research and development on wear debris analysis and causes of cavitation
22 November 2012 Holiday Inn, Herbert Walker Avenue, Southampton SO15 1HJ BOOK ONLINE www.imeche.org/events/S1691
SUPPORTING ORGANISATIONS
This is an excellent way to enhance your company profile and communicate effectively to your target audience. For sponsorship and exhibition enquiries, please contact Aman Duggal on +44 (0)20 7973 1309 or email sponsorship@imeche.org
BENEFITS OF SPONSORING Plant yourself firmly in the minds of key decision-makers Cross many markets and broaden your international appeal Be associated with industry-wide publicity Enjoy well-targeted networking opportunities Have your company logo and URL featured on our website
If youre interested in any of these events, please contact Lisa Meenan on +44 (0)20 7973 1242 or l_meenan@imeche.org
PROGRAMME
WELCOME THURSDAY 22/11 SESSION 1 COATINGS
11:00
REGISTRATION AND REFRESHMENTS WELCOME AND INTRODUCTION ANTI-FOULINGS: HISTORY, LEGISLATION AND THE FUTURE Richard Dawson, Lead Coatings Specialist, Lloyds Register EMEA, Rationale for anti-fouling coatings History of anti-foulings Legislative background to anti-foulings Future trends in anti-fouling technology and legislation NOVEL SHIP-ON-A-CHIP TESTING OF ANTIFOULING COATINGS: A MICROFLUIDIC PERSPECTIVE Dr Julian Wharton, Lecturer, nCATS, Southampton BREAK COMPOSITE MATERIALS FOR BEARINGS AND MECHANICAL SEALS IN MARINE APPLICATIONS Alec Barron and John Thornhill, Wrtsil, UK Introduction to water lubricated composite bearings: thermosetting phenolics, polyesters, epoxies Advantages and disadvantages Some friction data and implications Mechanical seal interfaces Future requirements A NOVEL SYSTEM FOR THE LUBRICATION OF LARGE TWO STROKE MARINE ENGINE PISTON RING PACKS Graham Calderbank, Lecturer/PhD Research Student, UCLan, UK Piston-ring lubrication issues associated with large marine diesel engines A novel system for the solution of these problems - a feedback control lubrication system Potential advantages of such a system Current research relating to this at UCLan LUNCH BREAK THE LUBRICATION OF LARGE FOUR STROKE MARINE ENGINES OPERATING ON HEAVY FUEL OIL John Smythe, Infineum
11:30
ALEC BARRON
TECHNOLOGY MANAGER, WRTSIL UK In his current role, Alec has specific responsibilities for composite technologies. Alec worked in R&D for 16 years, specialising in thermoplastic, thermoset and composite bearings for the marine, rail, automotive and general engineering industries.
12:00
12:30
JOHN THORNHILL
TECHNICAL MANAGER, WRTSIL UK John has over 25 years experience in mechanical sealing systems for marine applications. As Technical Manager, his responsibilities include new product development and customer support.
SESSION 3 LUBRICANTS AND ADDITIVES
13:00 14:00
MARINE AND POWER LUBRICANTS DEVELOPMENT MANAGER, SHELL GLOBAL SOLUTIONS Jos Luis joined Shell marine and power technology in 2006, involved in research and development of lubricants for large diesel engines. For the last four years, he has been focused on the development of Shells next generation of marine cylinder lubricants.
14:30
CYLINDER OIL STRESS IN THE 2-STROKE LOW SPEED MARINE DIESEL ENGINE AND CYLINDER OIL DEVELOPMENT Jose-Luis Garcia, Marine and power lubricants development manager, Shell Global Solutions The oil stress concept Oil stress in low speed two-stroke engines and lubricant properties Influence of operating conditions and fuel in oil stress Cylinder oil stress development REFRESHMENTS ADVANCES IN WEAR DETECTION AND ANALYSIS IN MARINE APPLICATIONS Michael Dines, Sales Manager, Fuel and oil testing, Kittiwake Developments Brief overview of condition monitoring Wear detection and analysis technologies Case studies CONDITION MONITORING: USED LUBRICATING OIL ANALYSIS AND MANAGEMENT Stanly George, Condition Monitoring Manager, SeaTec UK Introduction to condition monitoring Causality statistics Various condition monitoring techniques Choosing the right condition monitoring techniques and challenges faced TRIBOCORROSION AT SEA Professor Robert Wood, Director, nCATS, Southampton Tribocorrosion issues relevant to marine energy and propulsion systems Testing techniques available for investigating tribocorrosion of marine material performance Issues of quantifying the separate influences of mechanically induced wear CONCLUSIONS CLOSE OF DAY
GRAHAM CALDERBANK
15:00
SESSION 4 CONDITION MONITORING
UNIVERSITY OF CENTRAL LANCASHIRE Graham lectures on thermofluids, mechanical systems and programming while researching for his PhD on a feedback control system for the piston-ring lubrication of large marine engines.
15:30
16:00
16:30
Tribology Group Organising committee: Professor Ian Sherrington, University of Central Lancashire Dr Julian Wharton, nCATS The committee would like to thank the following supporters: STMG, Thermofluids, Process, Aerospace
17:00 17:15
Find out more about our speakers at www.imeche.org/events/S1691 This programme is subject to change. The Institution is not responsible for the views or opinions expressed by individual speakers.
BOOKING FORM
TRIBOLOGY GROUP TRIBOLOGY AT SEA 2012. MANAGING MARINE OPERATIONS EFFECTIVELY. 22 NOVEMBER 2012 S1691
Title (Mr, Mrs, Miss) Job Title Institution
REGISTRATION Please complete in capitals. Family Name First Name Membership No Name of Organisation (for name badge) Address for correspondence Town/City Postcode Contact Telephone Email Do you have any special requirements?
Please complete and return this form to: EVENT REGISTRATIONS Institution of Mechanical Engineers 1 Birdcage Walk, London SW1H 9JJ Fax +44 (0)20 7222 9881 For registration enquiries call Tina Churcher on +44 (0)20 7973 1258 or email t_churcher@imeche.org
Please read the information listed below as each booking is subject to the Institutions standard terms and conditions. CONDITIONS OF BOOKING Completed application forms should be returned to the address above, along with the correct payment. Attendance at the event will be confirmed on receipt of the full balance. All participants are advised to bring a copy of their confirmation with them on the day, to ensure the fastest possible entry. SPECIAL REQUIREMENTS Please inform us of any special requirements, ie dietary or access, on the relevant section of this form.
How did you hear about this event? o Direct mail o Website o Colleague o Other The Institution organises a wide programme of events each year. If you would like to receive information about our events, please tick this box o FEES AND CHARGES Please complete the appropriate box. Registration fees include entry to the sessions, refreshments, lunch, and a copy of the event proceedings. 1 DAY RATE Fee VAT Total Two-by-two (for those registering two or more from one organisation) Member, Institution of Mechanical Engineers Member, supporting organisation Non-member Student / Retired Member 160.00 260.00 260.00 330.00 55.00 32.00 52.00 52.00 66.00 11.00 192.00 312.00 312.00 396.00 66.00 _____ _____ _____ _____ _____
CANCELLATION For a refund (minus 25 +VAT admin charge), cancellations must be received at least 14 days prior to the event. Replacement delegates are welcome at any time. The Institution reserves the right to cancel any event. In this case, the full fee will be refunded unless a mutually convenient transfer can be arranged. In the event that the Institution postpones an event for any reason and the delegate is unable or unwilling to attend on the rescheduled date, they will receive a full refund of the fee paid. The Institution is not responsible for any loss or damage as a result of a substitution, alteration or cancellation/postponement of an event. The Institution shall assume no liability whatsoever if this event is cancelled, rescheduled or postponed due to a fortuitous event, Act of God, unforeseen occurrence or any other event that renders performance of this conference impracticable, illegal or impossible. For purposes of this clause, a fortuitous event shall include, but not be limited to: war, fire, labour strike, extreme weather or other emergency. Please note that while speakers and topics were confirmed at the time of publishing, circumstances beyond the control of the organisers may necessitate substitutions, alterations or cancellations of the speakers and/or topics. As such, the Institution reserves the right to alter or modify the advertised speakers and/or topics if necessary without any liability to you whatsoever. Any substitutions or alterations will be updated on the events webpage as soon as possible. SUPPORTING ORGANISATIONS Members of supporting organisations can register at members rates. See page 2. VENUE This event will be held at Holiday Inn, Herbert Walker Avenue, Southampton SO15 1HJ LIABILITY The organisers do not accept liability for any injuries or losses of any nature incurred by delegates and/or accompanying persons, nor for loss or damage to their luggage and/or personal belongings. ACCOMMODATION to book call Destination Southampton on +44 (0)845 226 9944, hannah@destinationsouthampton.com or visit www.destinationsouthampton.com and complete the on-line accommodation booking form. ENQUIRIES For event enquiries, please contact Tina Churcher on +44 (0)20 7973 1258 or email t_churcher@imeche.org The Institution of Mechanical Engineers is a registered charity (no 206882) VAT No GB299930493.
Fee 10.00
VAT 2.00
_____ _____
PAYMENT DETAILS
Payment must accompany this registration form. Registration will be confirmed only on receipt of full payment.
Please indicate method of payment: o Cheque o Credit Card o BACS o Invoice (see below)
Cheques should be made payable to IMechE and crossed. Please note international delegates may pay only by credit card, BACS or bankers draft. A copy of the draft must accompany this form. It is the delegates responsibility to pay any bank charges.
Credit Card: o Visa o MasterCard (please note we cannot accept American Express, Diners Club or Maestro)
Card No Valid From Name of Cardholder Billing Address of Cardholder (if different from above) Postcode Amount to be Deducted Signature INVOICE DETAILS (UK DELEGATES ONLY)
Expiry Date
Delegates wishing to be invoiced must provide an order number. If your company does not use order numbers please include a formal request for invoicing on your companys letterhead. A charge of 10 +VAT will be made to cover additional administration costs. Invoices are payable on receipt and no alterations to these terms will be accepted.
Order No Contact Name Name and Address for Invoicing Tel Postcode Fax
BACS bank transfers can be made to: IMechE Current Account, NatWest Charing Cross Branch. Sort code: 60-40-05 Acc No: 00817767 A copy of the draft must accompany this form. Swift Code: NWBKGB2L IBAN Code: GB96NWBK60400500817767
For added convenience you can also book online at: www.imeche.org/events/S1691