Elber Datasheets Mobile Systems - SPM - (Mt-Mr-Line) (En)

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

oa Br r ou Y

M IC

ROW

a dc

S INK OL g ADI in VE R

st

r tn Pa

er

Mobile Microwave Link

SPM

GENERAL DESCRIPTION
The mobile multi-channel microwave system SPM is available either in analogue and digital version. The working frequency can be any 500 MHz band between 6 GHz and 19 GHz and the modulation can be either analogue (FM) or digital (QPSK, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM). The system is composed of indoor and outdoor units; a 75 Ohm coaxial cable connects both units. The Outdoor equipment is composed of tripod complete with panoramic head, base plate, orthomode transducer, parabolic dish complete with feeder and one or two RF Heads. The tripod is of heavy duty type and has telescopic legs with orientable feet. Tripod is manufactured using light and robust aluminum alloy. The panoramic head, secured to the tripod with a single large threaded cylinder, permits 360 horizontal and 15 vertical position adjustment with fine angle resolution and final secure locking. The base plate, assembled on the panoramic head, supports one or two RF heads, the orthomode transducer and the parabola. The orthomode transducer is the interface between the RF head/s and the vertical and/or horizontal polarisation branches of the feeder. Three parabolic dishes sizes are available: 60 cm, 90 cm, 120 cm. The feeder is Cassegrain type, double polarisation with circular waveguide. The weatherproof RF heads capable of being installed on the base plate can be (depending on the application) single Transmitting or Receiving Head (Simplex), two Transmitting or two Receiving Heads (Double Simplex) or a Transmitting and a Receiving Head (Duplex). The RF head is weatherproof and is installed near the parabola in order to reduce waveguide losses. Each RF head is connected remotely to the control unit through a coaxial cable. The connection cable must have an impedance equal to 75 Ohm with tolerance less than 2 Ohm and must have double screened cable; the RG216 is suitable for this purpose. The connectors are LEMO (FFA.3T.275.CTAY11). The length of the cable RG216 can reach 300 m and this determines the choice of the correct value of equalisation.

SPM - 01 Rev. 2K7

FEATURES
Simplex, Double Simplex or Duplex Configuration Analogue or Digital Frequency Band 6 19 GHz 70 MHz Input/Output IF Up to 500 MHz frequency agile Low phase noise Power Output @ 1 dB Compression Point: MT/07 +33 dBm 1 dB MT/10 +30 dBm 1 dB MT/14 +30 dBm 1 dB ALC control for digital transmission High spurious suppression Excellent Noise figure Weatherproof RF Heads Carrying case Orthomode Transducer 60 / 90 / 120 cm parabolic dishes RS232, RS485 and SNMP remote control interfaces

SPECIFICATIONS
General: Centre Frequency: 6 GHz 15 GHz Frequency Span: max 500 MHz Channels Spacing: To be specied at order Number Of Channels: Depending on channel spacing Frequency Stability: 20 ppm (standard stability) 2 ppm (high stability) IF/DC Connector: LEMO (ERA.3T.275.CTL) Transmitting Head MT/xx: Saturated RF Output Power: MT/07 +33 dBm 1 dB MT/10 +30 dBm 1 dB MT/14 +30 dBm 1 dB RF Output Connector: Female N-type RF Output Return Loss: > 20 dB Spurious Output Content: < -65 dB IF Impedance: 75 Ohm Receiving Head MR/xx: Noise Figure: < 5 dB RF Input Connector: Female N-type RF Input Return Loss: > 20 dB Image Rejection: > 75 dB IF Impedance: 75 Ohm Orthomode: Cross-Channel Isolation: 35 dB (minimum) Return Loss: 20 dB RF Heads Connectors: Type-N Male Feeder Flange: Circular Maximum Power: 20 W Weight: 2.8 Kg (including mounting frame and bracket) Physical: Cabinet Waterproof RF Heads: Width 168 mm Height 260 mm Depth 366 mm Electrical: Input Voltage: DC: 22V to 65V negative to ground Maximum Power Consumption: Transmitter 35 W Receiver 15 W Control Unit: IF Frequency: 70 MHz IF/DC Connector: LEMO (ERA.3T.275.CTL) Controls: Front Panel (LCD Display 20x2, Keypad) RS-232 RS-485 SNMP Electrical: Input Voltage: AC: 230V/50Hz or 115V/60Hz DC: 22V to 65V Power consumption: 10 W Environmental: Operating Temperature Range: -10 to 60C Relative Humidity: 0 to 95%, non condensing Compliance: CE mark

ORDERING INFO
Parabola Pxx/yy Field XX Option Diameter Tag 60 90 120 YY Frequency 07 10 14 Orthomode OMT/xx Field XX Option Frequency Tag 07 10 14 Transmitting Head MT/xx Field XX Option Frequency Tag 07 10 14 Receiving Head MR/xx Field XX Option Frequency Tag 07 10 14 Tx Control Unit UCT3/xx Field XX Option Remote Control Type Tag RS SNMP Rx Control Unit UCR3/xx Field XX Option Remote Control Type Tag RS SNMP Description RS232 & RS485 RS232 & RS485 &SNMP Description RS232 & RS485 RS232 & RS485 &SNMP Description 5 to 8 GHz 10 to 13.25 GHz 13.25 to 15 GHz Description 5 to 8 GHz 10 to 13.25 GHz 13.25 to 15 GHz Description 5 to 8 GHz 10 to 13.25 GHz 13.25 to 15 GHz Description 60 cm Dish 90 cm Dish 120 cm Dish 5 to 8 GHz 10 to 13.25 GHz 13.25 to 15 GHz

OVERVIEW ASSEMBLY

1) 2) 3) 4) 5) 6) 7) 8)

Panoramic Head Base Plate Tripod Feeder Orthomode Transducer Transmitting Head Receiving Head 60 cm Parabola Dish

ELBER Srl. Via Pontevecchio, 42W - 16042 Carasco (GE) Italy Phone +39.0185.351333 fax +39.0185.351300 www.elber.it - elber@elber.it

You might also like