Professional Documents
Culture Documents
Plan of Catch Basins and Pavement Joints: Notes
Plan of Catch Basins and Pavement Joints: Notes
Plan of Catch Basins and Pavement Joints: Notes
joint
NOTES
GRATE AND FRAME: The design shall be essentially the same and equally as strong as the one shown (see construction information table), or meet the requirements of CMS 711.14. Grate openings and dimensions shall not differ from those shown here unless otherwise shown in the plans. As of January 1, 2003, the following text shall be cast into the top of the grate: "DUMP NO WASTE" and "DRAINS TO WATERWAY" Text shall be printed in bold, capital letters with a minimum height of ". "WATERWAY" may be substituted with "STREAM","RIVER","LAKE", etc. Actual placement and logo may vary per manufacturer. BEARING AREAS: of frame and grate shall be so fitted and finished as to provide a firm and even seat for all portions of the grate in the frame. No projections shall exist on bearing areas of either casting and the grate shall seat in its frame without rocking. Frame and grate shall be fitted, matched and marked before delivery to the project. WALLS: Brick or cast-in-place walls shall have a nominal thickness of 8" [200]. Precast walls shall 1 8" [ 450]
Back of curb
3" [ 75]
( Typ. )
REVISIONS
Cap
( I BRACKETS [ ) ARE N ]
MINIMUM DEPTH: The minimum depth shall be the outside diameter (O.D.) of the outlet pipe plus 15" [380]. OPENINGS: Any pipe openings greater than 4" [100] from the outside of the pipe to the structure require the Engineers approval. Fill all voids per CMS 604. DOWELS: Four 1"x18" [25x450] dowels are required for concrete pavement and curb. SCD BP-2.2 See for dowel detail. BLOCKOUT APRONS: Shall be Class C concrete. Cost of apron shall not be included in catch basin price when located in PCC pavement, and no deduction in normal pavement quantities shall be made because of blockout. When adjacent paving is asphalt, the dowels shall be omitted and the cost of the concrete apron shall be included in the catch basin bid price. Cost of curb, if any, shall be included in CMS 609. For basins without curb, the grate elevation shall be 1" [25] below the normal pavement slope measured at the center of the grate. PAYMENT: All materials and labor, including excavation and backfilling, shall be paid for under Item 604 Catch Basin, No. 6.
f cheek
28" [711]
13" [337]
2" [57]
I \ pr Const ucton Dr : \ r i awi ngs\ SCD\ Hy aul dr i cs\ CB\ cb23_ 07- 1 5- 05_ V8. dgn
[ 50]
2"
O FFI E C
for Sections
[106]
" [ 9] 1
4"
2" [ 50]
" [ 8] 91
3" [ 75]
46" [ 1 168]
"[ 908]
35
" [ 6] 1
4" [114]
4" [114]
( Typ. )
"
[ 59] 1
16"x34" [406x864]
CONSTRUCTION INFORMATION Minimum weight [mass] of grate, 210 lbs. [95 kg] Minimum weight [mass] of frame, 265 lbs. [120 kg]
2" [ 50]
19"x37" [483x940]
17" [451]
FRAME
GRATE
SCD NUMBER
CA TCH 2
36
[ 78] 1
7"
BA SI N
1"x2" [28x50]
N o. 6
EN G I EERI G N N
Butt joint
OF
OTHERWI SE NOTED.
9" [ 225]
CONCRETE: Cast-in-place concrete shall be Class C. Precast concrete shall meet the requirements of CMS 706.13 and be marked with the catch basin number. The wall thickness reduction shall be from the outside.
( Typ. )
J Stai s . n
have a minimum thickness of 6" [150] and be reinforced sufficiently to permit shipping and handling without damage.
Cur b
Gutter frame and grate 1 Reinforcing steel per SCD BP-1.1 1 Normal pavement slope
3" [ 75]
joint (Typ.)
" [ 3] 1
Top of curb
REVISIONS
Butt joint
18" [450]
[ 50] 1
Construction joint
( I BRACKETS [ ) ARE N ]
Mortar
1" [25] Dowel (Typ.)
Mortar
f cheek
Permissible constr. joint Minimum pipe dia. 12" [300] Permissible constr. joint
[ 50] 1
6"
Construction joint
8" [200] Structural Backfill CMS 604.06 3-0" [900] [ 75] 3"
1-6" [450]
8" [200]
I \ pr Const ucton Dr : \ r i awi ngs\ SCD\ Hy aul dr i cs\ CB\ cb23_ 07- 1 5- 05_ V8. dgn
8" [200]
SECTION B-B
(See Sht. 1/2.)
CAST-IN-PLACE CONCRETE
SECTION A-A
(See Sht. 1/2.)
SCD NUMBER
CA TCH 2
BA SI N
N o. 6
EN G I EERI G N N
[ 50] 1
O FFI E C
6"
OF
OTHERWI SE NOTED.
J Stai s . n
[ 50] 1
6"
6"