Professional Documents
Culture Documents
MSDS (Xyron G701V)
MSDS (Xyron G701V)
Area of Feature
Throughout part Intersection to nominal wall (max) Lead in (from edge of id) Lead in depth Maximum Height Maximum Outside Diameter Inside Diameter (screw dependant) Inside Diameter (screw dependant) Bottom clearance Minimum Draft Radius at bottom Intersection to nominal wall (max) Height (max) Spacing Intersection to ribs or boss Spacing
Suggestions
2 4mm (0.078 0.153 inch) 50% 0.8 1.3mm 0.5 0.8mm 2 x outside diameter (8mm) 2.5 x inside diameter (8mm) M3 = 2.5 ~ 2.7mm M4 = 3.4 ~ 3.6mm 2 4mm 1.5 2.0o 1.0mm 50% 2.5 x nominal wall 2 x nominal wall 50% feature wall stock 2 x nominal wall
Ribs
Gussets
DISCLAIMER OF WARRANTY AND LIABILITY. Notice: Although the information and recommendations set forth herein are presented in good faith and believed to be correct, Asahi Kasei Corporation expressly disclaims any and all representations and warranties as to the completeness and accuracy there of. Information is supplied upon the express condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. Asahi Kasei warrants only that this product will perform according to the technical specificati ons provided in the MSDS and other materials provided by it. No other representations or warranties, expressed or implied, whether oral or aising by usage or trade or course of dealing, without limitation, any warranties of fitness or merchantability, shall be given any legal effect by this product or these materials. This product has not been designed, tested, or intended for any use other than that for which it has been contracted for sale. This product is not warranted against injuries or damages of any kind caused by uses for which this product was not designed, tested or intended. Nothing contained herein is to be construed as a recommendation to use any product, process, equipment or formulation in conflict with any patent, and Asahi Kasei Corporation makes no representation or warranty, express or implied, that the use there of will not infringe any patent.