Professional Documents
Culture Documents
Siemens Power Engineering Guide 7E 109
Siemens Power Engineering Guide 7E 109
Siemens Power Engineering Guide 7E 109
8DJH
Rated Voltage Frequency Short-duration power-frequency withstand voltage Lightning impulse withstand voltage Normal current for ring-main feeders Normal current for busbar Normal current for circuit-breaker feeders Normal current for transformer feeders Short-time withstand current, 1 s Short-time withstand current, 3 s Short-circuit making current for ring-main feeders for circuit-breaker feeders for transformer feeders Short-time withstand current, 1 s Short-time withstand current, 3 s Short-circuit making current for ring-main feeders for circuit-breaker feeders for transformer feeders
* 42 kV according to some national requirements
kV Hz kV kV A max. A A A max. kA max. kA 50 Hz max. kA max. kA max. kA max. kA max. kA max. kA 60 Hz max. kA max. kA max. kA max. kA
12 50/60 28* 75
15 50/60 36 95
17.5 50/60 38 95
24 50/60 50 125
The gas-insulated mediumvoltage switchgear type 8DJH is used for power distribution in secondary distribution systems up to 24 kV. Ring-main feeders, circuit-breaker feeders and transformer feeders are all part of a comprehensive product range to satisfy all requirements with the highest level of operational reliability also for extreme ambient conditions. Performance features Design veried according to IEC 62271-200 Sealed pressure system with SF6 lling for the entire service life Safe-to-touch enclosure and standardized connections for plug-in cable terminations 3-pole, gas-insulated switchgear vessel for switching devices and busbar Panel blocks and single panels available Switching devices: threeposition load-break switch (ON OFF EARTH), switchfuse combination for distribution transformer protection, vacuum circuitbreaker with three-position disconnector, earthing switch Earthing function of switching devices generally make-proof
Dimensions Width W Number of feeders (in extracts) 2 feeders (e.g., RR) 3 feeders (e.g., RRT) 4 feeders (e.g., 3R + 1T) Panels without low-voltage compartment Panels with low-voltage compartment (option) Switchgear with pressure absorber (option) Standard switchgear Switchgear with pressure absorber (option)
Height
Depth
109