Professional Documents
Culture Documents
Catalog
Catalog
Welding Accessories
esigned to work as an extra hand- enables fast and accurate holding of any D ferrous object. Will hold both sheet and tube at angles of 45, 90 and 135. Compact design allows use in tight places. an be used as double-sided holder for welding and assembly work. C deal for use as work-holder and positioner in welding, soldering, marking-off, I pipe installation, supporting, jigging, assembly, as a separator, multi-units for heavy weldments, lifting etc. 0 per carton. 1 Caution! Do not use with DC current when welding. Welding Soldering
Assembly
Marking-Off
Pipe Installation
Heavy Weldments Dimensions Inches 3.6 x 2.4 x 0.44 4.7 x 3.4 x 0.56 6.3 x 4 x 0.63 7-9 x 5 x 0.88 Supports up to Lbs. Kg 28 48.5 90 122 12.5 22 41 55 Direct lifts (each angle)* Net weight Lbs. Kg Oz. 11 18.5 35 48.5 5 8.5 16 22 6 12 1.65 2.75
Part No. M-060 (small) M-061 (medium) M-063 (large) M-065 (x-large)
Magnet: anisotropic ferrite * In contact with ferrous objects of adequate thickness and smooth surface finish.
eavy-duty forged tank wrenches fit most valve H stems and gas connections. ocket-holes are deep, smooth and precisely S sized for solid connection. arger handles for firm grip and better leverage. L All wrenches are individually packaged. Part No. 1013 UPC No. 0 27719 01320 6 01321 3 01330 5 01331 2 01332 9 Part No. 0250 Part No. 0010 Part No. 0005 Hole Size Inches mm 3/8 9/32 3/8 3/8 3/16 9.52 7.14 9.52 9.52 4.76
Tank Wrenches
Description Ten way tank wrench, 3/16" - 1-1/8" with 3/8" socket T handle tank wrench, for Linde acetylene valves T handle tank wrench, for commercial acetylene valves L handle tank wrench, for commercial acetylene valves Box tank wrench, for B & MC acetylene valves
336
www.oki-bering.com
Pressure Gauges
remium quality replacement gauges are the P Polished industry standard. BG Series xy-cleaned welding gauges (cleaned for O oxygen per ANSI B40.1 STD.). uitable for use on oxygen service, medical S equipment and other fuel gases which are non-corrosive to brass or bronze and where stem-mounting is desired. olished drawn brass or gold powder painted steel P with one-piece, impact-resistant polycarbonate posilock lens. or use with compressed gas regulators, these F POP gauges are an excellent choice for the original Part No. equipment and replacement applications. BG-15100 They will provide long-life and safe operation. Gauges are U.L. listed. BG-15200 Specifications: Case: owder painted steel (gold) or P polished drawn brass Lens: One-piece, impact-resistant polycarbonate Socket: Brass Connection: /4" N.P.T. - 2" (50 mm) and 1 2-1/2" (60 mm) dial Movement: Precision machined all copper alloy Tube: Copper alloy bourdon tube Pointer: Black-finished aluminum Dial-face: asy-to-read, corrosion-resistant E aluminum dial Accuracy: 3%-2%-3% per ANSI B40.1 grade B BG-1530 BG-15400 BG-154000 BG-230 BG-2100 BG-2200 BG-2400 BG-24000 BG-2530 BG-25100 BG-25200 BG-25400 BG-254000 BG-260 BG-2600 BG-23000 BG-2560 BG-25600 BG-251000
Pressure Gauges
Drawn Brass
Welding Accessories
Boxed Part No. BG-15100-B BG-15200-B BG-1530-B BG-15400-B BG-154000-B BG-230-B BG-2100-B BG-2200-B BG-2400-B BG-24000-B BG-2530-B BG-25100-B BG-25200-B BG-25400-B BG-254000-B BG-260-B BG-2600-B BG-23000-B BG-2560-B BG-25600-B BG-251000-B
Size 1.5" 1.5" 1.5" 1.5" 1.5" 2" 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2"
PSI 100 200 30 400 4000 30 100 200 400 4000 30 100 200 400 4000 60 600 3000 60 600 1000 3000
POP Part No. PG-15100 PG-15200 PG-1530 PG-15400 PG-154000 PG-230 PG-2100 PG-2200 PG-2400 PG-24000 PG-2530 PG-25100 PG-25200 PG-25400
Boxed Part No. PG-15100-B PG-15200-B PG-1530-B PG-15400-B PG-154000-B PG-230-B PG-2100-B PG-2200-B PG-2400-B PG-24000-B PG-2530-B PG-25100-B PG-25200-B PG-25400-B
Size 1.5" 1.5" 1.5" 1.5" 1.5" 2" 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2"
PSI 100 200 30 400 4000 30 100 200 400 4000 30 100 200 400 4000
www.oki-bering.com
337
Welding Accessories
SF-5-DC
SA-5-DC
SL-4-DC
SD-5-DC
otary burs offer perfect R solutions for the welding jobs: trimming welds, grinding smooth filets and preparation for welding. epairs can be R easily done Part Nos: because of a variety of shapes and sizes available. 0 per carton 1
CSA-5
CSF-5
CSD-5
CSC-5
CSL-4
Part Nos:
RM-6
RE-6
RC-6
RA-6
Note: Use lower speeds when cutting harder ferrous materials and higher speeds for softer non-ferrous materials.
Description Half-round file, bastard, 12", bulk Half-round file, bastard, 14", bulk
Used for removing rust, scale, paint, solder etc. Additional uses include cleaning threads, files, metal parts and castings. Available in carbon or stainless steel.
Part No.
Description Scratch brush, bulk Stainless steel brush, bulk Shoe handle brush, bulk Stainless steel brush, bulk Description Brass brush, 3 x 7 rows, bulk Stainless steel brush, 3 x 7 rows, bulk
Long handle 388-CS 03370 9 388-SS 03371 6 Shoe handle SH-46-CS 03372 3 SH-46-SS 03373 0 Part No. T-37-B T-37-SS UPC No. 0 27719 00160 9 00393 1
Resistant to most parts cleaning solutions. reat for hard-to-reach spots and for cleaning G in confined areas comes with a metal ferrule for more support.
Ctn 50/300
338
www.oki-bering.com
Electrode Holders
Electrode Holders
Ergonomically designed. Lever for good hand clearance and better hold. Lightweight and easy-to-use. Available in a complete range of styles, sizes & capacities (150- 500 amp.) for accommodating electrodes from 1/16" (1.5 mm) through 3/8" (10 mm) from economically priced to heavy-duty models. Made from high quality materials for both high conductivity and improved cable connections. Efficient grooved jaw design insures firm electrode grip. Fully insulated, high strength spring for excellent gripping power. Heavy-duty, shock-proof nylon handle. Supplied with an allen wrench and cable connection ferrule assuring efficient connection and minimizing cable strand breakage at the connection.
Welding Accessories
Hyclass
Match your Pearson electrode holder to the electrode size and amperage used for greatest efficiency.
400
500
Myclass
Maintenance Class
10 per carton. Part No. AF-2 Part No. AF-1 AF-2 AF-25 AF-3 AF-50 UPC No. 0 27719 00726 7 00731 1 01112 7 00736 6 00741 0 Amperage Capacity 150 200 250 300 500 Part No. AF-3 Electrode Capacity Inches mm Up to 5/32 4.0 Up to 5/32 4.0 Up to 3/16 4.8 Up to 1/4 6.4 Up to 3/8 10 Part No. AF-50 Cable Capacity AWG mm2 1/0 50 1/0 50 2/0 70 2/0 70 4/0 105 Length Inches 8 8 8 10 12 mm 215 215 215 250 310 Weight oz. grams 14 390 14 390 14 400 22 610 28 800
Match your Pearson electrode holder to the electrode size and amperage used for greatest efficiency.
Part No.
300
500
www.oki-bering.com
339
Electrode Holders
Proclass
Production Class
10 per carton. Part No. JH-1 Part No. AW-C UPC No. 0 27719 01137 0 01142 4 01147 9 Amperage Capacity 250 300 500 Electrode Capacity Inches mm Up to 3/16 4.8 Up to 1/4 6.4 Up to 3/8 10 Part No. A3-S Cable Capacity AWG mm2 1/0 50 2/0 70 4/0 105 Length Inches 8 10 13 mm 215 250 325 Weight oz. grams 15 430 22 610 32 900
Welding Accessories
Match your Pearson electrode holder to the electrode size and amperage used for greatest efficiency.
500
Electrode Holders
Lightweight and easy-to-use. Better maneuverability - great for tight places. Excellent for vertical welding (Optimal type). M ade from high quality materials for both high conductivity and improved cable connections. E fficient grooved jaw design insures firm electrode grip. A ngle-head allows excellent visibility of production work (stub type). F ully insulated, high strength spring for excellent gripping power. Heavy-duty, shock-proof nylon handle. S upplied with an allen wrench and cable ferrule assuring efficient connection and minimizing cable strand breakage at the connection. 10 per carton.
Part No. 40-B UPC No. 0 27719 00766 3 Amperage Capacity 400 Electrode Capacity Inches mm Up to 3/16 4.8 Cable Capacity Length AWG mm2 Inches mm 3/0 95 8-3/4 220 Weight oz. grams 17 490
Match your Pearson electrode holder to the electrode size and amperage used for greatest efficiency.
340
www.oki-bering.com
Electrode Holders
Lightweight and easy-to-use. conomically priced and available in two most popular models E (200 & 300 amp.) for accommodating electrodes up to 3/16" (4.8 mm). fficient grooved jaw design insures firm electrode grip. E ully insulated, high strength spring for excellent gripping power. F Heavy-duty, shock-proof nylon handle. upplied with an allen wrench and cable connection S UPC No. Part No. 0 27719 ferrule assuring efficient connection and minimizing cable strand breakage at the connection. HM-20 02823 1 10 per carton. HM-30 02829 3
Handyman
Part No. HM-30 AMP Capacity 200 300 Electrode Capacity Inches mm Up to 5/32 4.0 Up to 3/16 4.8 Cable Capacity AWG mm2 #1 35 2/0 70 UPC No. 0 27719 00273 6 Length Inches mm 8 200 9-1/4 235 Weight oz. grams 11 310 14 380
Welding Accessories
Match your Pearson electrode holder to the electrode size and amperage used for greatest efficiency.
400
ade from high quality materials for both high M conductivity and improved cable connections. eavy-duty models are available in wide range of sizes and H capacities (200-600 amp.) for accommodating electrodes from 1/16" (1.5 mm) through 3/8" (10 mm). Part No. SG-40 etter maneuverability- great for tight places. B Excellent for vertical welding. traight-head allows excellent visibility of S production work. Electrode Capacity Cable Capacity Length Weight UPC No. AMP igh strength, heavy-duty, fully-insulated shock H Part No. 0 27719 Capacity Inches mm AWG mm2 Inches mm oz. grams proof handle. SG-20 00266 8 200 Up to 5/32 4.0 #1 35 8-3/4 220 12 330 upplied with an allen wrench and cable connection S SG-40 00268 2 400 Up to 5/16 8.0 3/0 95 10-1/4 260 19 530 ferrule assuring efficient connection and minimizing SG-60 00271 2 600 Up to 3/8 10.0 4/0 105 10-3/4 275 23 630 cable strand breakage at the connection. Newly designed electrode holder. Match your Pearson electrode holder to the electrode size and amperage used for greatest efficiency. 10 per carton.
SupraGrip
400
600
Tip Insulators
Model No. TI-1 Top TI-2 TI-3 TI-4 Bottom TI-5 TI-6 TI-7 TI-8 TI-9 TI-10 TI-11 TI-14
Part No. AF-1 AF-2 AF-25 AF-3 AF-50 PA-532 PA-316 PA-732 PA-14 PA-14-HD PA-38-HD UT-20 UT-30 UT-40 JH-1 AW-C A3-S HM-20 HM-30
UPC No. 0 27719 01047 2 01052 6 01057 1 01062 5 01067 0 01072 4 01227 8 01232 2 01237 7 01242 1 01247 6 00273 6
300
350
400
500
www.oki-bering.com
341
Ground Clamps
nique design helps eliminate arc blow and U makes it easy to change ground location for the best results. Large contact area assures positive grounding.
Ground Clamps
Part No. EG-200 Part No. UPC No. 0 27719 00776 2 00781 6 00786 1 AMP Capacity 200 300 500
Part No. EG-300 Jaw Opening Inches mm Up to 1-1/2 40 50 Up to 2 Up to 2 50 Cable Capacity AWG mm2 6-4 10-16 2-1 1/0-4/0 25-35
Part No. EG-500 Length Inches 7 8 mm 175 200 245 Weight oz. grams 8 210 14 17 390 490
Welding Accessories
Zinc plated. EG-200 arge hex screw cable connection L EG-300 assures safe cable connection every time. ure copper braided shunts on EG-500 - allows EG-500 P both jaws to carry welding current. 10 per carton.
50-105 10
arge contact area assures excellent L electrical contact. trong gripping power: S Pull strength = 130 Gauss. rounding concealed to prevent G dislodgement. Insulated to prevent annealing. Easy installation or removal. ost popular magnetic ground M Part No. MGC-300 clamps in the market. 10 per carton.
earson ground clamps come in a range P of models - from lightweight to heavy duty, high capacity models. upplied with an allen wrench and cable S connection ferrule assuring efficient connection and minimizing cable strand breakage at the connection.
Ground Clamps
Part No. PGC-200 Part No. UPC No. 0 27719 AMP Capacity 200 300 500
Part No. PGC-300 Jaw Opening Inches mm Up to 1 Up to 1-1/2 Up to 2 25 40 50 Cable Capacity AWG mm2 1-1/0 1/0-3/0 2/0-4/0 35-50 50-95
Part No. PGC-500 Length Inches 6 8 mm 150 200 225 Weight oz. grams 16 25 35 445 715 990
70-105 9
C ontoured handle lever for easy jaw opening. Strong gripping power. L arge contact area assures positive grounding. Fully insulated spring. C onductor body holds the cable securely. L arge hex screw cable connection assures safe cable connection every time. 0 per carton. 1
Part No. LGC-200 Part No. UPC No. 0 27719 AMP Capacity 200 300 500
Part No. LGC-300 Jaw Opening Inches mm Up to 1 Up to 1-1/2 Up to 1-1/2 25 40 40 Cable Capacity AWG mm2 1-1/0 1/0-3/0 2/0-4/0 35-50 50-95
Part No. LGC-500 Length Inches 5-1/4 7-1/4 mm 130 180 200 Weight oz. grams 12 21 23 340 600 652
70-105 8
Part No. GC-2 Part No. GC Series GC-2 GC-3 GC-5 UPC No. 0 27719 01172 1 01177 6 01182 0 AMP Capacity 200 300 500
Part No. GC-3 Jaw Opening Inches mm Up to 1 Up to 1-1/2 Up to 1-1/2 25 40 40 Cable Capacity AWG mm2 4-1/0 1/0-2/0 2/0-4/0 16-50 50-70
Part No. GC-5 Length Inches 7 8-1/2 mm 175 210 235 Weight oz. grams 17 22 28 490 630 800
70-105 9-1/2
342
www.oki-bering.com
Part No. BC-600B Part No. BC-600 BC-600R BC-600B UPC No. 0 27719 00150 0 00152 4 00154 8
Part No. BC-600R Jaw Opening Description AMP Inches Battery clamps, set 600 Up to 1-1/2 Battery clamp, red 600 Up to 1-1/2 Battery clamp, black 600 Up to 1-1/2
Welding Accessories
mm 40 40 50
Cable Capacity AWG mm2 1-3/0 35-95 1-3/0 35-95 1-3/0 35-95
Ctn 10 20 20
arge contact area assures excellent L electrical contact. High clamping pressure. igh alloy conductor assures maximum H conductivity. 0 per carton. 1
Part No. WGC-600 Part No. UPC No. 0 27719 AMP Capacity 600 600
Part No. CGC-600 Jaw Opening Inches mm Up to 4 Up to 4 100 100 Cable Capacity AWG mm2 1/0-4/0 1/0-4/0 50-105 50-105 UPC No. 0 27719 00846 2 00851 6 00856 1 00861 5 00866 0 00871 4 Length Inches 8-1/4 9-1/2 mm 205 235 Weight oz. kg. 63 58 1.8 1.64
Cable Connectors
MBP Series
esigned to efficiently conduct the current D through a detachable-type connection. am-action design allows lock-in with a twist C and pulls the two halves tightly together. etal parts are precision machined from heavy M brass extrusion- resists rust & corrosion. onnector covers have remarkable resistance C to heat, cold, abrasion, ozone, oils & solvents. Tapered ends. Lock-out moisture, oil and dirt. onnector covers are specially compounded to C be flame retardant.
Part No. Male 1-MBP-1 2-MBP-1 4-MBP-1 Female 1-MBP-2 2-MBP-2 4-MBP-2 Sleeves 1-MBP-IS 2-MBP-IS 4-MBP-IS
Cable Capacity AWG 4-1 1/0-3/0 3/0-4/0 4-1 1/0-3/0 3/0-4/0 mm2 16-35 50-95 95-105 16-35 50-95 95-105
Ctn 20 20 20 20 20 20
Part No.
Cable Capacity AWG 4-1 1/0-3/0 3/0-4/0 mm2 16-35 50-95 95-105
Ctn 10 10 10
For: 1-MBP (pair) For: 2-MBP (pair) For: 4-MBP (pair) Cable Capacity mm2 10-25 35-50 50-70 70-95 10-25 35-50 50-70 70-95
Dinse Style
Part No. Part No. SK-25 Part No. BK-25 DINSE SK-25 SK-50 SK-70 SK-95 DINSE BK-25 BK-50 BK-70 BK-95
AWG Style- Euro Cable Plug 00876 9 6-2 00881 3 1-1/0 00886 8 1/0-2/0 00891 2 2/0-3/0 Style- Euro Cable Socket 00896 7 6-2 00901 8 1-1/0 00906 3 1/0-2/0 00911 7 2/0-3/0
Ctn
10 10 10 10 10 10 10 10
Part No.
uro cable adapter (Dinse style to Pearson ) E allows to interconnect with most other types of U.S. Cable connectors - allows complete flexibility.
Ctn AWG mm2 Euro Cable Adapter (DINSE Style to Pearson) DA-1025 00272 9 6-2 10-25 10 DA-5095 00916 2 1/0-3/0 50-95 10
www.oki-bering.com
343
Cable Capacity AWG 6-2 1-2/0 6-2 1-2/0 2/0-3/0 mm2 10-25 35-70 10-25 35-70 70-95
Ctn
Welding Accessories
10 10 10 10 10
SE-3570 00926 1 Panel Socket BE-1025 Part No. BE-3570 Part No. BE-7095 BE-3570 BE-7095 00931 5 00936 0 00941 4
Cable Lugs
Solder Type
Precision made from copper tubing. xtra long barrel for easy soldering or possible E connection. asy to use- flared-end for easy E Part Nos. cable access.
L-68 Cable Capacity AWG mm2 6-8 8-10 4-6 6-2 1-2/0 3/0-4/0 10-16 10-25 35-70 Stud Hole Inches mm 21/64 8.3 21/64 17/32 17/32 8.3
L-120 I.D. of Socket Inches mm 10/32 8.0 11/32 1/2 35/64 5/8 8.5 13 14 16
95-105 17/32
Hammer-on Type
asy and convenient to use- no special tools E required. ammer blow makes a solid connection. H xcellent pull-out strength without soldering E or bolting. Part Nos. HL-21 Part No. HL-62* HL-21* HL-1020* HL-3040*
HL-62 UPC No. 0 27719 01212 4 00976 6 00981 0 00986 5 AMP Capacity 150 200 300 500
HL-1020 Cable Capacity AWG mm2 6-2 10-25 2-1 1/0-2/0 3/0-4/0 25-35 50-70 95-105 Stud Hole Inches mm 17/32 13.5 17/32 17/32 17/32 13.5 13.5 13.5 I.D. of Socket Inches mm 1/2 13 1/2 35/64 5/8 13 14 16 Pcs./Card 10 5 5 5 Ctn 5 5 5 5
Heavy duty, double slide support for rigidity. urable spring-loaded mechanism holds D terminal/lug in place. elivers 1400-1800 lbs. (635-815 kg.) pull-out D resistance (terminal to cable). eep throat for easy insertion of terminal/lug D fitted on cable end. asy-to-read scale on both sides of drive punch E prevents under-crimping. ide base for stability- excellent for welding W to a bumper of fleet service truck or for bolting to a bench. Part No. CM-20
344
www.oki-bering.com
Welding Accessories
Rated at high capacity: RT-215C - 10,000 lbs/4540 kg (average strap strength). RT-227C - 15,000 lbs/6800 kg (average strap strength). ully adjustable for securing F large, heavy or bulky loads. ust resistant, cadmium R plated steel hardware. Part No. RT-227C Heavy-duty anchor chain at each end with grab hook. Extra-wide and long ratchet handle provides extra leverage. Weather resistant straps. trong, lightweight and rugged 100% polyester webbing, Identified by bright S yellow safety straps. T-212C comes with ratchet handle protector: Heavy duty sewn fabric pad R used to protect surface finish of cargo and ratchet mechanism ratchet handle protectors, wear pads help protect cargo and extend life of the tie down.
Rated at high capacity. RT-215 - 5,000 lbs/2270 kg (average strap strength). RT-227 - 10,000 lbs/4540 kg (average strap strength). ully adjustable ratchet tie F down used to secure large, heavy or bulky loads. Part No. RT-215 ebbing is made with strong, W lightweight and rugged 100% polyester, identified by bright yellow safety strap. Part No. RT-112 RT-115 RT-215 RT-227 RT-212C RT-227C UPC No. 0 27719 00686 4 00691 8 00696 3 00711 3 00716 8 00721 2 Size (ft) W x L 1" x 12' 1" x 15' 2" x 15' 2" x 27' 2" x 12' (chain 5/16" x 12") 2" x 27' (chain 3/8" x 12") 5/16" 3/8" Grab Hook 5/16" Max. Cap. (Lbs.) 1,500 3,000 5,000 10,000 10,000 15,000 Avg. Strap (Kg) 680 1360 2270 4540 4540 6800 Weight (Lbs.) 1 1.5 6.5 7 7.85 11.25 Ctn/Case Pack 10/40 10/20 1/5 1/5 1/5 1/5
Super strength compounded rubber lasts longer. Ozone, weather, wear, tear and abrasion resistant. Resists deterioration in outdoor environments. Reinforced ends. Cadmium plated sturdy steel S hooks. 10 per carton. 100 per case pack.
www.oki-bering.com
345
MasterGage
Welding Accessories
Back View
MG-8
MG-11
Depth of Undercut
Misalignment (High-low)
Tested to 30,000 strikes. ightnin Bug is the hottest little torch lighter on the market. Its electric multi-spark discharge ignites L all fuel gases quickly and easily. he amazing new energy generator used in Lightnin Bug never needs flints, batteries or charging. T asy and accurate ignition insured by multi-spark discharge: E 5 times or more per squeeze. urable: made of high quality materials, the Lightnin Bug D withstands severe working conditions. Its zinc plated body resists rust and corrosion. ersatile: Lightnin Bug ignites almost all industrial fuel gases, V such as oxy-acetylene, natural gas, propane, methane, MAPP, propylene, etc. 10 per carton Part No. 08-100 (UPC No. 0 27719 01319 0) Lightnin Bug is registered trademark of Worldwide Welding, Inc.
346
www.oki-bering.com
Tip Cleaners / Tip Drill Kit / Tip Refacing Tool / Key Ring
Tip Cleaners
Rust proof, stainless steel wire. File included in the case. Uniform ridges wipe and polish the orifice wall. Tangle free loops. T apered-ends allow smooth easy entry without scratching. 1 0 per carton.
Wire Dia. 0.014 0.018 0.021 0.024 0.028 0.032 0.035 0.037 0.039 0.042 0.048 0.055 0.062 0.069 0.074 0.078 0.085 0.090 0.095 0.102 0.108 0.102
Ridge Dia. 0.016 0.020 0.023 0.026 0.030 0.034 0.038 0.040 0.042 0.044 0.050 0.057 0.065 0.075 0.080 0.085 0.092 0.096 0.102 0.108 0.114 0.126
Cleans Hole Diameter (inch) .018 - .020 .021 - .022 .024 - .026 .028 - .031 .032 - .035 .036 - .038 .039 - .040 .041 - .042 .043 - .046 .046 - .051 .052 - .055 .060 - .064 .067 - .073 .076 - .078 .081 - .082 .086 - .089 .094 - .096 .100 - .102 .104 - .106 .110 - .113 .116 - .120 .128 + Drill Size 77 - 76 75 - 74 73 - 71 70 - 68 67 - 65 64 - 62 61 - 60 59 - 58 57 56 55 - 54 53 - 52 51 - 49 48 - 47 46 - 45 44 - 43 42 - 41 39 - 38 37 - 36 35 - 33 32 - 31 30 +
Welding Accessories
King Size Set of 13 extra-long cleaners with file. age sizes: 6 through 26 for cleaning G drill size: 77-49. Part No. 0KTC (UPC No. 27719 01715 0)
Standard, Deluxe Set of 13 cleaners with file. age sizes: 6 through 26 for cleaning G drill size: 77-49. Part No. 0STC (UPC No. 27719 01714 3)
Jumbo Set of 9 cleaners with file. age sizes: 28 through 45 for cleaning G drill size: 48-30. Part No. 0JTC (UPC No. 27719 00198 2)
Master Set of 22 cleaners combines all standard and jumbo sizes with file. age sizes: 6 through 45 for cleaning G drill size: 77-30. Part No. 0MTC (UPC No. 27719 01716 7)
Most practical tip cleaning tool made. Cleans and trues most standard orifices. ontains most commonly used 12 drills (#52-74) C in assorted sizes. omplete with built-in chuck and C pocket clip. 10 per carton. Part No. TDK-12 (UPC No. 0 27719 00122 7)
evolutionary tool that eliminates scale, slag and R orifice distortion from cutting tip faces. ust a few quick turns and the tipster restores the J face of your tips to their clean, original condition. olding the tip in the proper refacing position is H easy with the tough, nylon shell. 10 per carton. Part No. TR-38 (UPC No. 0 27719 00110 4)
Handy for welders and repairmen-keys are safe and secure. Attaches easily to a strap, belt loop or a handle. Made from high quality steel with high lustre brass finish. Resists rust and corrosion. Individually poly-bagged. Part No. BK-110
www.oki-bering.com
347
Medical Cart
Welding Accessories 6
Handyguard
olds up to 10 lbs. of 12" or 14" electrodes. H ithstands temperatures up to 225 F (107 C). W Part No. HG-14 - 14" Part No. HG-18 - 18" Part No. HG-36 - 36"
ounded-file spark lighters feature R the largest hood and round file in the industry. riple-flint lighter is a quality lighter T made for the demand of the welding industry. It has a strong frame and with three large flints makes dependable ignition under all weather conditions. nduring popularity is merited E Part No. by dependable performance, 2001 ease of operation, lightweight and low-cost. 2001-C 2001F 2001F-C
Part No. 2001 UPC No. 0 27719 00002 2 00003 9 00022 0 00023 7 00024 4 00004 6 00005 3 00025 1 00052 7 00053 4
Description Single flint spark lighter, bulk (boxed) Single flint spark lighter, carded Replacement flints for single flint spark lighter, (5 pcs./Holder), 20 holders/box (bulk) Replacement flints for single flint spark lighter, (5 pcs./Holder), 1 holder/card Replacement flints for single flint spark lighter, (5 pcs./Holder), 2 holders/card Triple flint spark lighter, bulk (boxed) Triple flint spark lighter, carded Replacement flints for triple flint spark lighter, bulk (boxed) Replacement flints for triple flint spark lighter, carded (1 pcs./Card) Replacement flints for triple flint spark lighter, carded (5 pcs./Card)
348
www.oki-bering.com
Holds wrenches, chisels, etc. Vibration-absorbing design, Attach to broom handles and mops for better grip. Eases awkward hand positioning. Description Tool Holder, 18" Tool Holder, spark resistant, 18"
Hand Tools
olds parts in proper alignment - even when H material is not of identical thickness. Positive lock leaves hands free. eep-throated U-shaped jaws provide D perfect visibility. 0 per carton 1 Part No. WC-9 (UPC No. 0 27719 00125 8)
ocks to work with powerful grip for smooth and L accurate bending and seaming. icro-adjusting screw and easy M release trigger. Locks to work with powerful grip. akes all kinds of bending, forming and crimping M jobs faster and easier. 0 per carton 1 Part No. LS-8 (UPC No. 0 27719 00139 5)
igh grade alloy steel for maximum durability H and performance. icro-adjustment for quick M pre-adjusting and repeat clamping. owerful locking mechanism prevents P slippage. Jaws open wide for versatility. Locks securely with hand squeeze. Easy-release trigger. 0 per carton 1 Part No. LC-6 (UPC No. 0 27719 00138 8) Part No. LC-11 (UPC No. 0 27719 00137 1)
Rugged, heavy duty drop forged steel frame. Non-slip clamping on all shapes. Extra throat depth. S teel spindles are copper plated for spatter protection. wivel pads adjust freely to S bear evenly on clamped part. Lacquered finish. ndividually boxed for easy I storage and protection. Part No. 412P Part No. 410P Part No. 408P
New design frame for maximum strength. teel spindles are copper plated for spatter protection. S wivel pads adjust freely to bear evenly on clamped part. S Lacquered finish. Part No. CC-6 Part No. CC-5
Throat Capacity Inches mm 0 - 2 0 - 3 0 - 4 0 - 5-1/4 0 - 5-7/8 0-50 0-75 0-100 0-130 0-147
mm 28 40 56 65 83
Ctn 10 10 10 10 10
514
www.oki-bering.com
Description Plier, mini-MIG Holster for YS-20 Welper, MIG plier Holster for YS-50
Hand Tools
L arge contact area assures excellent electrical contact. High clamping pressure. H igh alloy conductor assures maximum conductivity. 1 0 per carton. Part No.
9
Part No. WGC-600 UPC No.0 27719 AMP Capacity 600 600 Jaw Opening Inches mm Up to 4 Up to 4 100 100 Part No. CGC-600 Cable Capacity AWG mm2 1/0-4/0 1/0-4/0 50-105 50-105 Length Inches 8-1/4 9-1/2 mm 205 235 Weight oz. kg. 63 58 1.8 1.64
Fast, accurate visual inspection of hidden areas. Offers limitless number of positions. Withstands the stresses of constant repositioning. Non-slip handle. 10 per carton. Part No. FM-15 (UPC No. 0 27719 00123 4)
www.oki-bering.com
515
000A Description
00AW
WH-10
WH-30
mm 290
01006 9 01011 3 01016 8 01021 2 01026 7 01222 3 00690 1 01031 1 01036 6 01041 0
Cone and chisel, coil handle heavy duty Cone and cross chisel, coil handle, economy Cone and cross chisel, coil handle Cone and chisel, wooden handle Cone and chisel, soft grip handle Brush and chisel, brush locking thumb screw Brush and chisel, wooden handle Chisel and cross chisel, wooden handle Cone and chisel, wooden handle Cone and cross chisel, wooden handle Curved cone and curved chisel, wooden handle
11 11 11 11 11 11 12 12 13 13 13
280 280 280 280 280 280 275 275 325 325 325
16 15 15 13 14 17 17 16 23 23 24
Hand Tools
650 680
igh carbon steel hand shear for cutting welding cable through 4/0 (105 mm2), H power cable through 6/4 (65 mm) and rubber hose through 1/2" (13 mm). xcellent for maintenance, repair, rigging, fabrication, tool cribs, out-fitting E splicing and many others. No jaws to replace. Heavy vinyl covered safety handles. 0 per carton 1 Caution: Designed for copper and aluminum cables only.
Hooked to a support near the work area, the Clitch frees the welder from the cable weight. It allows the cable to be pulled through but will not let it slip back. Made to fit cable size: - AWG #2 (25 mm2) through AWG 4/0 (105 mm2) or - 5/8" (16 mm) through 7/8" (22 mm) in diameter. 0 per carton. 1 Part No. CH-240
High Rise
Building Construction
Ship Construction
Television Towers
Electrical Towers
516
www.oki-bering.com
Part Nos.
WL-F5
WL-R5
WL-S5
WL-T5
Part Nos.
WL-512
WL-514
WL-516
WL-518
Soapstone Holders
All holders come with our #1 select soapstone Stainless steel body, aluminum knob. Steel nut holds # 1 select soapstone firmly. Comes with pocket clip.
Part No. NS-16 WL-F5-6 WL-512 WL-512-B NS-16A WL-R5-10 WL-514 WL-514-B NS-16B WL-S5-10 WL-516 WL-T5 WL-T5-10 WL-518
UPC No. 0 27719 01310 7 00527 0 01430 2 01311 4 00532 4 01431 9 01312 1 00537 9 01343 5 00533 1 00538 6 00528 7
Description Flat soapstone, bulk Flat soapstone Flat soapstone holder Flat soapstone holder, bulk Round soapstone, bulk Round soapstone Round soapstone holder Round soapstone holder, bulk Square soapstone, bulk Square soapstone Square soapstone holder Thin line soapstone, bulk, 1/16 Thin line soapstone, 1/16 Thin line soapstone holder, 1/16
UM 144 pcs./pack 6 pcs./card 1 per card case pack 144 pcs./pack 10 pcs./card 1 per card case pack 144 pcs./pack 10 pcs./card 1 per card 144 pcs./pack 10 pcs./card 1 per card
11
Pocket Scribe
Lightweight, yet strong aluminum handle. harp tungsten carbide tip cuts into hard surfaces, S leaves clear marks on metal, glass, plastic, tools etc. omes with protective tip cover- protects against C damaged points, torn cloth and punctured fingers. Handy pocket clip. 10 per carton. Part No. ES-4 (UPC No. 0 27719 01438 8)
568
www.oki-bering.com
Welding Helmets
Exclusive design: contemporary profile and narrow shell design engineered to maximize performance and enable welders to work more efficiently and comfortably with increased productivity. Safe to use: extended head, face, neck and ear coverage protects against sparks and slag - preventing burns and harmful ultra-violet and infra-red rays. Lightweight: reduces stress on welders neck and back muscles. Streamlined design: allows you to work in tight space. Easy, adjustable knobs, even with the gloves on. Strong and durable: withstands heavy on-the-job abuse. Non-reflective surface: absorbs stray radiation and avoids arc flash. Ergonomically engineered: scientifically balanced for easy nod down. Excellent ventilation: channels smoke and fumes away from the welder. Makes breathing easier and a unique shape that allows room for respirators. Unique magnifier lens holder: built-in magnifier holder is adjustable to multiple positions. Adaptable: to most auto-darkening filters. Helmet includes shade 10 filter plate, safety plate (standard size) and adjustable locking ratchet headgear with sweatband. Meets or exceeds ANSI Z87.1 & CE standards.
Part No. Passive EAD-24F EAD-54F ADF-24F Part No. ADF-54F ADF-54F Auto-Darkening EH-24F* EH-24L* EH-54F* Headgear OERH* *Also available in bulk.
Description 2" X 4-1/4" fixed shade 10 4-1/2" x 5-1/4" fixed shade 10 2" X 4-1/4" fixed shade 10 4-1/2" x 5-1/4" fixed shade 10 2" X 4-1/4" fixed front, fixed shade 10 2" X 4-1/4" lift front, fixed shade 10 4-1/2" x 5-1/4" fixed front, fixed shade 10 Adjustable ratchet headgear
13
www.oki-bering.com
667