Professional Documents
Culture Documents
EJC65E
EJC65E
EJC65E
1/8
General Arrangement
2.4 m (8 ft)
Sandvik Mining and Construction Canada Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
2006 Sandvik Mining and Construction Canada Inc. Sandvik Mining and Construction reserves the right to change this specification without notice
NOTE: All dimensions in millimeters. Dimensions in brackets are in inches. All vertical dimensions are for an empty unit.
EJC 65E
2/8
Power Train
Motor
Type Output Voltage Frequency Speed Insulation class Cable reel AC induction type, 3 phase 37 kW (50 Hp) 600 V 60Hz/50Hz 1700 RPM/1475 RPM F Self winding type with automatic tension control and low cable shutdown 152 m (500 ft.) of #6 type GGC cable including box mount type Joy plug
Operating Weights
Total operating weight front axle rear axle 7130 kg 1823 kg 5307 kg 15720 lb. 4020 lb. 11700 lb.
Loaded Weights
Total loaded weight front axle rear axle 10079 kg 6292 kg 3786 kg 22220 lb. 13872 lb. 8348 lb.
Electric cable
Transfer Case
Dana SOH Gear drive 2.39:1
Capacities
Tramming capacity Break out force, lift Break out force, tilt Tipping load Standard bucket 2948 kg 37 kN 46 kN 7727 kg 1.2 m 6500 lb. 3791 kg 8340 lbf 4750 kg 10450 lbf 17000 lb. 1.5 yd
Transmission
Rexroth AA4V56 Hydrostatic transmission with forward and reverse
Axles
Front axle Rear axle Centre articulation/ oscillation Dana SOH 12D0840, conventional differential, fixed. Dana SOH 12D0840, no-spin differential, fixed. 16
Tires
Tire size Air pressure, front Air pressure, rear 9.00 X 20, 18 PLY 517 kPa 5.17 bar 517 kPa 5.17 bar 75 psi 75 psi
Frame
Rear and front frame Welded steel box construction Material G40.21 - 50WT-CAT#3 Central hinge Welded steel box construction with hardened steel spherical bearings Material G40.21 - 50WT-CAT#3 Lift arms Solid plate construction Material G40.21 - 50WT-CAT#3 Tanks are welded to frame.
Systems
Steering Hydraulics
Closed centre system with a single fixed displacement gear pump. One double acting steer cylinder equipped with electro./mechanical control lever.
2006 Sandvik Mining and Construction Canada Inc. Sandvik Mining and Construction reserves the right to change this specification without notice
Sandvik Mining and Construction Canada Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
EJC 65E
Turning Radius
Inner Outer Turning angle 1905 mm 3861 mm 40 75 in 152 in
3/8
Main Components
Hydraulic pump Control valve Steering cylinders Gear Electro. / mechanical EJC 3.5" bore x 1.75" rod (89 mm x 44 mm)
Manuals
All manuals are delivered on CD-ROM in web based format with Adobe PDF output for printing.
Distribution
Manual Type Spare parts manuals Operators manual Service manual Customer 3 Copies 3 Copies 3 Copies Market Area 1 Copy 1 Copy 1 Copy
Pressure Settings
Main relief Port relief valves 15.2 MPa 152 bar 17.2 MPa 172 bar 2200 psi 2500 psi
Bucket Hydraulics
Full hydraulic open-centre system with one gear pump. Equipped with electro./mechanical control lever, two lift cylinders and one dump cylinder.
Main Components
Hydraulic pump Control valve Lift cylinders Dump Cylinder Gear Electro. / mechanical EJC 4.0" bore x 2.0" rod (102 mm x 51 mm) EJC 6.5" bore x 3.5" rod (165 mm x 89 mm)
Pressure Settings
Main relief Bucket dump Bucket roll back Lift arms raise/lower Hydraulic oil tank capacity 15.2 MPa 5.5 MPa 17.2 MPa 17.2 MPa 114 l 152 bar 55 bar 172 bar 172 bar 30 US gal. 2200 psi 800 psi 2500 psi 2500 psi
Ejector Buckets
Standard Brakes
Dynamic service braking through the hydrostatic transmission. The parking brake is a spring applied, hydraulically released dry disc brake mounted on the front axle pinion.
1.5 yd
Main Components
Pressure accumulator Piston type with charge valve
Electrical Equipment
Alternator Batteries Driving and working lights 24 V 35 A min. 2 x 12 V, 950 CCA 2 front, 2 rear
2006 Sandvik Mining and Construction Canada Inc. Sandvik Mining and Construction reserves the right to change this specification without notice
Sandvik Mining and Construction Canada Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
4/8
60 55 50
EJC 65 Electric
MOTOR: TRANS: 600V, TEAO, 60 Hz Rexroth AA4V56 Hydrostatic AXLES: 12D0840 TIRES: 9.00 X 20, 18 PLY XMD2 Payload: 2950 kg Rolling Resistance % Empty Loaded
0 2 4 6 8 0 2 4 6 8
25 20 15 10 5
5% 30%
GRADE
20%
15% 10% 5%
0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
2006 Sandvik Mining and Construction Canada Inc. Sandvik Mining and Construction reserves the right to change this specification without notice
Speed (km/h)
Sandvik Mining and Construction Canada Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
5/8
MOTOR: TRANS:
AXLES: 12D0840 TIRES: 9.00 X 20, 18 PLY XMD2 Payload: 6500 lbs
0
Loaded
2 4 6 8
GRADE
30%
20%
4
20% 15%
3
15% 10%
2
10%
1 0 0 1 2 3 4 5 6 7 8 Speed (mph) 9 10
5% 5%
11
12
13
14
15
16
2006 Sandvik Mining and Construction Canada Inc. Sandvik Mining and Construction reserves the right to change this specification without notice
Sandvik Mining and Construction Canada Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
6/8
180
160
Fixed cycle time includes the time for filling, dumping, turning and accelerating
Hor./0 10 10
1:10/10 7.75 10
1:7/15 5.75 10
1:5/20 4.5 10
120
100
80
60
40
20
0 0 40 80 120 160 200 240 280 320 360 400 440 ONE WAY DISTANCE IN METRES
2006 Sandvik Mining and Construction Canada Inc. Sandvik Mining and Construction reserves the right to change this specification without notice
0%
10%
15%
20%
Sandvik Mining and Construction Canada Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
7/8
Fixed cycle time includes the time for filling, dumping, turning and accelerating 1:5/20 2.8 6.2
1300
1400
0%
10%
15%
20%
Sandvik Mining and Construction Canada Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
We make it possible
4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Web: http://www.sandvik.com