Professional Documents
Culture Documents
1 128113 PP Eurostrand-OSB-Betonschalung en
1 128113 PP Eurostrand-OSB-Betonschalung en
1 128113 PP Eurostrand-OSB-Betonschalung en
www.egger.com
REDUCE EXPENDITURE SECURE QUALITY EUROSTRAND OSB MOISTURE-RESISTANT, ABLE TO WITHSTAND HEAVY LOADS AND DIMENSIONALLY STABLE
PROdUCT dESCRIPTION
PRODUCTION EUROSTRAND OSB boards are wood-based material boards featuring 100% formaldehyde-free resin and a three-layer structure of especially aligned strands (micro-veneers) manufactured according to EN 300 OSB and general building authority approval Z-9.1-566 of the Deutsches Institut fr Bautechnik (DIBt). The specic strand geometry (chip length up to 160 mm) and very high degree of strand orientation as well as the raw materials used assure above-average technical characteristics. RAW MATERIALS USED Debarked softwood from domestic forestry Paran wax emulsion PU resin Water CHARACTERISTICS EUROSTRAND OSB 3 E0 or OSB 4 TOP with moisture-resistant PU resin Low thickness swelling and high dimensional stability High loading capacity Firm t of fasteners even close to the edges Unsanded surface is recommended Up to three cycles and more with corresponding handling and care Use of mould releasing agent is recommended Recommended board thickness d 20 mm AREAS OF APPLICATION Sheathing for repeated use Textured facework, e.g. ceiling cladding Ceiling edge formwork and foundation formwork Cost-effective alternative for permanent formwork (base slab) Fitted boards for system formwork (e.g. DOKA) THE CERTIFICATES General building authority approval (DIBt) Z-9.1-566 OSB CE certication by WKI Braunschweig Environmental product declaration (EPD), Institut fr Bauen und Umwelt e.V. ISO 9001 certication
Advantages at a glance
Economical alternative to coniferous plywood (e.g. maritime pine) Reusable No distortion No strand delamination after exposure to moisture Straightforward handling Uses wood resources from sustainable forestry
* The stability and rigidity values are mean values derived from own observations ** For additional formats, please consult the EUROSTRAND OSB/2 and OSB 3 E0 brochure
The allowable load and concrete pressure values must be established by a structural engineer according to the respective applicable standards (calculation values EN 12369-1 or DIBt Z-9.1-566).
Additional information on the physical construction properties and concrete component designs can be found on www.egger.com
www.egger.com
TECHNICAL HOTLINE
T +49 3841 301 - 21260 F +49 3841 301 - 20222 construction@egger.com
EN_952944_08/12 Subject to technical modications and amendments. EGGER reserve the right to withdraw or amend the information at any time.
EGGER Holzwerkstoe Wismar GmbH & Co. KG Am Haffeld 1 23970 Wismar Germany T +49 3841 301-0 F +49 3841 301-20222 info-wis@egger.com
EGGER Building Products GmbH Weiberndorf 20 6380 St. Johann in Tirol Austria T +43 50 600-0 F +43 50 600-10111 info-ebp@egger.com