Professional Documents
Culture Documents
Marechal Plugs Sockets Decontactors DN
Marechal Plugs Sockets Decontactors DN
DECONTACTOR
The range
Advantages Features Core range DN8 - 20 A DN1 - 30 A DN3 - 50 A DN6 - 90 A DN9 - 150 A Dimensions
Spare parts: see page 174
p. 46 p. 47 p. 48 p. 50 p. 52 p. 54 p. 56 p. 58 p. 60
CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
Building sites
46
DN DSN
Advantages
Electrical features
From 20 to 150 Amps - Voltage up to 500 Volts AC (except DN9: 415 V) and up to 130 Volts DC Integral switching device as defined in clause 2.8 of IEC / EN 60309-1 standard Equipped with silver-nickel butt-contacts and metallic braid for added reliability and lifetime Active parts protected (IP2X finger protection with open lid) Unique keying system allows discrimination between 16 different power supplies (voltage, frequency, AC and DC current) except DN9: 4 different power supplies Number of cycles under normal operation and overload conditions from 2 to 8 times (depending on rated current) more than those required by IEC / EN 60309-1 standard Version with 4 auxiliary contacts (DN6: 90 A / 500 V)
Mechanical features
Automatic IP54 and IP55 watertightness as standard Casings made of glass fibre reinforced polyester (20 A) providing excellent electric insulation, high resistance to corrosive, UV and chemical agent environments and high mechanical resistance (IK08 impact resistance) Casings made of anti-corrosion treated metal (20 to 150 A) providing high temperature resistance and excellent mechanical resistance (IK09 impact resistance). Ambient temperature: -40 C to +60 C (for temperatures outside this range, please contact us) Spring-assisted terminals unaffected by vibrations and thermal cycling Self-opening lid; self-returning lid on request
Regulatory features
DN decontactors comply with: The IEC 60309-1 International standard and EN 60309-1 European standard (plugs and socket-outlets for industrial purposes), The European Low Voltage Directive (decree N95-1081 dated 3rd October 1995), The French decree N 88-1056 dated 14th November 1988 relating to workers protection, The decrees relating to workers protection in Belgium, Spain and Italy, The load breaking capacity according to utilisation category AC 22 of IEC / EN 60947-3 (switch standard).
Metal-bodied pl ug and socketoutlet with integr al switching device AC22, sil ver-nickel butt contacts with m etal braid, comply with BE CMA international standard . Product technica l data sheet on e-cata logue www.marechal-e lectric.com
47
DN
DECONTACTOR
The range
S
= +
DN decontactors meet the modularity system described on the front cover flap. Before consulting the part number pages, determine the parts required for the needed configuration.
Example : a wall mounting socket-outlet includes an active part, the socket-outlet (female) and an installation accessory,
the wall box. Each part has its own part number. Therefore, the order should have two part numbers.
The choice of an option or a version with auxiliary contacts results in adding a suffix (from 1 to 3 characters).
Characters from 5 to 7 Supply voltage** 20 - 24 V 190 - 230 V 220 - 250 V 380 - 440 V 380 - 440 V Handle Inclined sleeve Wall box Frequency 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz Polarity 2P 3P+E 1P+N+E 3P+E 3P+N+E
A = Installation accessory
** 16 different power supplies (voltage, frequency) and 12 polarities are available: see international standard and colour-code on page 8
48
DN
The DN core range
The following table describes the most frequent configurations. Take a look: if the required configuration is there, do not look further in the part number pages. Each configuration includes two part numbers: one for the active part (socket-outlet or inlet) and one other for the installation accessory (wall box, inclined sleeve or handle).
Advantages
Core range
DN8 - 20 A DN1 - 30 A DN3 - 50 A DN6 - 90 A DN9 - 150 A Dimensions
Inclined socket
Coupler socket
Plug
Socket-outlet H Handle
Inlet H Handle
DN8
DECONTACTOR
20 A
Polarity Part Number 19 84 015 19 8A 053 19 84 013 19 8A 053 19 84 017 * 19 8A 053 19 84 015 19 8A 027 19 84 013 19 8A 027 19 84 017 * 19 8A 027
Voltage
230 V 1P+N+E + installation accessory: 400 V 3P+E + installation accessory: 400 V * 3P+N+E + installation accessory:
DN1
DECONTACTOR
30 A
Polarity Part Number 19 14 015 19 1A 053 19 14 013 19 1A 053 19 14 017 * 19 1A 053 19 14 015 19 1A 027 19 14 013 19 1A 027 19 14 017 * 19 1A 027 19 14 015 19 1A 013 (P) 19 14 013 19 1A 013 (P) 19 14 017 * 19 1A 013 (P) 19 18 015 19 1A 013 (P) 19 18 013 19 1A 013 (P) 19 18 017 19 1A 013 (P) 19 18 015 19 1A 053 19 18 013 19 1A 053 19 18 017 19 1A 053 19 18 015 19 1A 027 19 18 013 19 1A 027 19 18 017 19 1A 027
(P) = poly
Voltage
230 V 1P+N+E + installation accessory: 400 V 3P+E + installation accessory: 400 V * 3P+N+E + installation accessory:
DN3
DECONTACTOR
50 A
Polarity Part Number 19 34 015 19 3A 053 19 34 013 19 3A 053 19 34 017 * 19 3A 053 19 34 015 19 3A 027 19 34 013 19 3A 027 19 34 017 * 19 3A 027 19 34 015 19 3A 013 (P) 19 34 013 19 3A 013 (P) 19 34 017 * 19 3A 013 (P) 19 38 015 19 3A 013 (P) 19 38 013 19 3A 013 (P) 19 38 017 19 3A 013 (P) 19 38 015 19 3A 053 19 38 013 19 3A 053 19 38 017 19 3A 053 19 38 015 19 3A 027 19 38 013 19 3A 027 19 38 017 19 3A 027
(P) = poly
Voltage
230 V 1P+N+E + installation accessory: 400 V 3P+E + installation accessory: 400 V * 3P+N+E + installation accessory:
DN6
DECONTACTOR
90 A
Polarity 3P+E Part Number 19 64 013 19 6A 053 19 64 017 * 19 6A 053 19 64 013 19 6A 027 19 64 017 * 19 6A 027 19 64 013 65 9A 013 D35 (E) 19 64 017 * 65 9A 013 D35 (E) 19 68 013 65 9A 013 D35 (E) 19 68 017 65 9A 013 D35 (E) 19 68 013 19 6A 053 19 68 017 19 6A 053 19 68 013 19 6A 027 19 68 017 19 6A 027
(E) = elastomere
Voltage 400 V
DN9
DECONTACTOR
150 A
Polarity Part Number 19 94 013 19 9A 053 19 94 013 19 9A 027 19 94 013 65 9A 013 D45 (E) 19 98 013 65 9A 013 D45 (E) 19 98 013 19 9A 053 19 98 013 19 9A 027
(E) = elastomere
Voltage
* A dual voltage 230 / 400 V socket-outlet with 3P+N+E accepts a 400 V plug with 3P+N+E or 3P+E as well as a 230 V plug with 1P+N+E (see front cover flap)
49
DN8
mettre photo de chantier
DECONTACTOR 20 A
Main features: (socket-outlet) IP (socket-outlet + inlet) IP IK (poly / metal) 55 54 08/09 Umax Wiring (min max) flexible Wiring (min max) stranded 20 A / 400 V 20 A / 400 V (AC22) 500 V AC - 130 V DC 1 / 4 mm2 1.5 / 6 mm2 20 A / 500 V 10 A / 500 V (AC22)
Rated currents (IEC / EN 60309-1) Rated currents and operating voltages (load breaking capacity according to IEC / EN 60947-3)
S
Main options
Socket-outlet (female)
Inlet (male)
Voltage
Stop button
Material Polyester Metal Polyester Metal Polyester Metal Polyester Metal Polyester Metal
Part # 11 84 08A 19 84 08A 11 84 033 19 84 033 11 84 015 19 84 015 11 84 013 19 84 013 11 84 017 19 84 017
Material Polyester Metal Polyester Metal Polyester Metal Polyester Metal Polyester Metal
Part # 11 88 08A 19 88 08A 11 88 033 19 88 033 11 88 015 19 88 015 11 88 013 19 88 013 11 88 017 19 88 017
Tension cord
Socket-outlet options Device for self-ejecting coupler socket IP67 watertightness Self-returning lid 180 opening lid 180-opening and self-returning lid Padlocking shaft up to 3 padlocks 8mm Stop button Rubber cover for polyester latch Rubber cover for metal latch
+ + + + + + + + +
Inlet accessories IP54 cap Closing mechanism (finger draw plate) Tension cord 19 8A 126 19 8A 346 31 1A 336
CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
19 8A 346
If you want to equip a socket-outlet or an inlet with two or more options: call us at +33 (0) 1 4511KV 60 00. FURSE EARTHING TERMINATIONS 11 33KV CABLE JOINTS & CABLE
www.cablejoints.co.uk Thorne and Derrick UK Tel 0044 191 490 1547 Fax 0044 191 477 5371 Tel 0044 117 977 4647 Fax 0044 117 9775582
50
DN
Also see: Full range of boxes page 86 Dimensions page 60 Technical Manual page 150
Advantages Core range
DN8 - 20 A
DN1 - 30 A DN3 - 50 A DN6 - 90 A DN9 - 150 A Dimensions
Installation accessories
Box
Entry M20 M25 M32 M40
11 8A 053
19 8A 053
The boxes are supplied without any cable gland. The 70 boxes are not drilled (drilled at extra cost).
Sl
Sleeve
Handle
Cable dia. 5 - 21 mm
Straight metal with metal cable gland Cable dia. 6 - 12 mm 19 8A 963 10 - 18 mm 19 8A 953 25M
Straight poly flowerpot with metric threaded entry * Entry M20 M25 M32 M40
11 8A 013
Handle for flat or steel armoured cables on request (see zoom on page 55).
Domestic socket-outlet 10/16A 230V + inlet 1P+N+E, 10 A 230 V fuse protection Type UK FR with safety shutter Material Poly Metal Poly Metal
industrial
Part number 11 88 015 D40 * 19 88 015 D40 * 11 88 015 D16 19 88 015 D16
* All these domestic socket-outlets are available to foreign standards : replace D40 by D11 for France, D30 for Germany, D06 for Italy, D08 for Switzerland, D67 for Australia, D80 for USA etc
51
DN1
DECONTACTOR 30 A
Main features: (socket-outlet) IP (socket-outlet + inlet) IP IK (metal) 55 54 09 Umax Wiring (min max) flexible Wiring (min max) stranded 30 A / 400 V 30 A / 400 V (AC22) 500 V AC - 130 V DC 2.5 / 6 mm2 2.5 / 10 mm2 30 A / 500 V 16 A / 500 V (AC22)
Rated currents (IEC / EN 60309-1) Rated currents and operating voltages (load breaking capacity according to IEC / EN 60947-3)
S
Main options
Socket-outlet (female)
Inlet (male)
Voltage
Padlocking shaft (Padlock not supplied)
Stop button
Accessories
Socket-outlet options Device for self-ejecting coupler socket Device for self-ejecting plug IP67 watertightness Self-returning lid 180 opening lid 180-opening and self-returning lid Padlocking shaft up to 3 padlocks 8mm Stop button Rubber cover for metal latch
+ + + + + + + + +
Inlet options Device for self-ejecting coupler socket Device for self-ejecting plug IP67 watertightness Inlet accessories IP54 cap Ejecting mechanism (shark fin) Tension cord
CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS FEEDER PILLARS, FUSE to equipARC FLASH, CABLE ROLLERS, CUT-OUTS If you want LINKS, a socket-outlet or an inlet with two or more
52
DN
Also see: Dimensions page 60 Technical Manual page 150
Advantages Core range DN8 - 20 A
DN1 - 30 A
DN3 - 50 A DN6 - 90 A DN9 - 150 A Dimensions
Installation accessories
Box
Entry M20 M25 M32 M40
19 1A 053
Sl
Sleeve
Handle
Cable dia. 10 - 30 mm 10 - 30 mm
Straight poly
Straight poly flowerpot with metric threaded entry * Entry M20 M25 M32 M40
Cable dia. 6 - 12 mm 13 - 18 mm 18 - 25 mm * With built-in finger draw plate (for in-line connections) 22 - 32 mm 19 1A 013 19 1A 473 *
Handle for flat or steel armoured cables on request (see zoom on page 55).
53
DN3
DECONTACTOR 50 A
Main features: (socket-outlet) IP (socket-outlet + inlet) IP IK (metal) 55 54 09 Umax Wiring (min max) flexible Wiring (min max) stranded 50 A / 400 V 50 A / 400 V (AC22) 500 V AC - 130 V DC 4 / 10 mm2 4 / 16 mm2 50 A / 500 V 32 A / 500 V (AC22)
Rated currents (IEC / EN 60309-1) Rated currents and operating voltages (load breaking capacity according to IEC / EN 60947-3)
S
Main options
Socket-outlet (female)
Inlet (male)
Voltage
Stop button
Accessories
Tension cord
Socket-outlet options Device for self-ejecting coupler socket IP67 watertightness Self-returning lid 180 opening lid 180-opening and self-returning lid Padlocking shaft up to 3 padlocks 8mm Stop button Rubber cover for metal latch
+ + + + + + + +
19 3A 126 31 1A 336
If you want to equip a socket-outlet or an inlet with two or more CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS options: call us ARC FLASH, 11 60 00. FEEDER PILLARS, FUSE LINKS, at +33 (0) 1 45 CABLE ROLLERS, CUT-OUTS
54
DN
Also see: Dimensions page 60 Technical Manual page 150
Advantages Core range DN8 - 20 A DN1 - 30 A
DN3 - 50 A
DN6 - 90 A DN9 - 150 A Dimensions
Installation accessories
Box
Entry M20 M25 M32 M40 M50
19 3A 053
Sl
Sleeve
Handle
Cable dia. 13 - 35 mm 13 - 35 mm
Straight poly
Straight poly flowerpot with metric threaded entry * Entry M25 M32 M40 M50
Cable dia. 6 - 12 mm 13 - 18 mm 18 - 25 mm * With built-in finger draw plate (for in-line connections) 22 - 32 mm 19 3A 013 19 3A 473 *
CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
You need a handle11KV 33KV CABLE JOINTS & CABLE TERMINATIONS designed for flat or FURSE EARTHING steel armoured cables? www.cablejoints.co.uk Call us at 01 45 11 60 00. Thorne and Derrick UK
Tel 0044 191 490 1547 Fax 0044 191 477 5371 Tel 0044 117 977 4647Handle for flat cables Fax 0044 117 9775582
55
DN6
DECONTACTOR 90 A
Main features: (socket-outlet) IP (socket-outlet + inlet) IP IK (metal) 55 54 09 Umax Wiring (min max) flexible Wiring (min max) stranded 90 A / 400 V 90 A / 400 V (AC22) 500 V AC - 130 V DC 10 / 25 mm2 10 / 35 mm2 90 A / 500 V 63 A / 500 V (AC22)
Rated currents (IEC / EN 60309-1) Rated currents and operating voltages (load breaking capacity according to IEC / EN 60947-3)
S
Main options
Socket-outlet (female)
Inlet (male)
20-24V deleted
Voltage 190 - 230 V 220 - 250 V 380 - 440 V Dual voltage* Polarity 3P+E 1P+N+E 3P+E 3P+N+E Material Metal Metal Metal Metal Part # 19 64 033 19 64 015 19 64 013 19 64 017 Voltage 190 - 230 V 220 - 250 V 380 - 440 V 380 - 440 V Polarity 3P+E 1P+N+E 3P+E 3P+N+E Material Metal Metal Metal Metal Part # 19 68 033 19 68 015 19 68 013 19 68 017
Stop button
Socket-outlet with auxiliary contacts With 2 auxiliary contacts (5A) Socket # + 972 With 4 auxiliary contacts (5A) Socket # + 264
If you want to add an option to this kind of socket-outlet: call us at +33 (0) 1 45 11 60 00.
Inlet with auxiliary contacts With 2 auxiliary contacts (5A) With 4 auxiliary contacts (5A)
Accessories
Closing mechanism
If you want to equip a socket-outlet with two or more options: call us at +33 (0) 1 45 11 60 00.
Inlet accessories IP54 cap Closing mechanism (draw base) Ejecting mechanism (plug release cam) Tension cord 19 6A 126 19 6A 886 19 6A 397 31 1A 336
Tension cord
19 6A 876
56
DN
Also see: Dimensions page 60 Technical Manual page 150
Advantages Core range DN8 - 20 A DN1 - 30 A DN3 - 50 A
DN6 - 90 A
DN9 - 150 A Dimensions
Installation accessories
Box
Entry M32 M40 M50 M63
19 6A 053
Sl
Sleeve
Handle
Cable dia. 18 - 25 mm 25 - 35 mm 34 - 49 mm 35 - 45 mm
Straight elastomere
Straight poly with poly cable gland Cable dia. 34 - 44 mm 61 9A 253 63P
Straight metal with metal cable gland Cable dia. 16 - 24 mm 19 6A 953 32M 22 - 32 mm 19 6A 963 34 - 44 mm 19 6A 953 50M
Straight poly flowerpot with metric threaded entry * Entry M63 61 9A 253 463
* Cable gland on request.
Handle for flat or steel armoured cables on request (see zoom on page 55).
57
DN9
DECONTACTOR 150 A
Main features: (socket-outlet) IP (socket-outlet + inlet) IP IK (metal) 55 54 09 Umax AC Wiring (min max) flexible Wiring (min max) stranded 415 V AC - 130 V DC 25 / 50 mm2 35 / 70 mm2 150 A / 400 V 150 A / 400 V (AC22)
Rated currents (IEC / EN 60309-1) Rated currents and operating voltages (load breaking capacity according to IEC / EN 60947-3)
S
Main options
Socket-outlet (female)
Inlet (male)
20-24V deleted
Accessories
Closing mechanism
+ + + + + + + + +
Inlet accessories IP54 cap Closing mechanism (draw base) Ejecting mechanism (plug release cam) Tension cord
Tension cord
CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
19 9A 876
If you want to equip a socket-outlet or an inlet with two or more 11KV 33KV CABLE JOINTS & CABLE TERMINATIONS options: call us at +33 (0) 1 45 11 60 00. FURSE EARTHING
www.cablejoints.co.uk Thorne and Derrick UK Tel 0044 191 490 1547 Fax 0044 191 477 5371 Tel 0044 117 977 4647 Fax 0044 117 9775582
58
DN
Also see: Dimensions page 60 Technical Manual page 150
Advantages Core range DN8 - 20 A DN1 - 30 A DN3 - 50 A DN6 - 90 A
DN9 - 150 A
Dimensions
Installation accessories
Box
Entre M32 M40 M50 M63
19 9A 053
Sl
Sleeve
Handle
Cable dia. 18 - 25 mm 25 - 35 mm 34 - 49 mm 35 - 45 mm
Straight elastomere
Straight poly with poly cable gland Cable dia. 34 - 44 mm 61 9A 253 63P
Straight poly flowerpot with metric threaded entry * Entry M63 61 9A 253 463
* Cable gland on request.
Handle for flat or steel armoured cables on request (see zoom on page 55).
59
DN range dimensions
Socket-outlet + plug
d E H Z A BH E D BB YB YB C
Plug
5 - 21 10 - 30 13 - 35 25 - 45 25 - 45
A0 A1
Socket-outlet
A 67 73 97 110 110
BB 48 49 58 67 67
E 48 55 66 81 81
H YB 12 86 15 86 22 95 24 108 24 108
d 5 5 6 6 6
E1 M B' D' M CP
E2
D B Y Y
CA 84 76 85 87 110 138
CP 64 64 74 89 112 112
E1 70 65 72 84 105 163
E2 70 65 72 84 105 116
H 18 18 22 24 29 50
E1
A1
E2 B
CA
A B CA D 184 163 110 117 225 217 145 145 257 234 190 140
E1 94 125 170
CA
E2 70 97 108
30 inclined socket
E2
E1 D B D1 Y Y
A0 A1
B1 B0 Y Y
D2 CP
CP 64 74 89 112 112
D2 95 95 90 100 100
E1 63 63 87 124 124
E1
A0
A1
70 inclined socket
E2 D B
CA
A B CA D 122 160 77 106 147 213 102 145 162 232 190 140
E1 63 87 124
60
DN
Coupler socket
5 - 21 10 - 30 13 - 35 25 - 45 25 - 45
A0 A1
Dimensions
Inlet
A 45 51 77 89 89
BB 33 45 53 64 64
E 48 55 66 81 81
H 12 15 22 25 25
d 5 5 6 6 6
H
E1 M A B'
E2 D'
B M
Coupler socket connected (A1)/ disconnected (A0) in a 30 wall mounting appliance inlet
A1 A0
B B1 B0
CP CA
CA 84 76 85 87 122 183
CP 68 68 77 91 110 110
E1 70 65 72 84 105 163
E2 70 65 72 84 105 116
H 18 18 22 24 29 50
d 6 5.5 6 6 7 7
E1
E2
D B
CA
Coupler socket connected (A1)/ disconnected (A0) in a 70 wall mounting appliance inlet
B: 180 OPENING LID
A1
A0
B1 B B0 B
A B CA D 160 145 110 117 205 206 145 145 246 224 190 140
CA E1
E1 94 125 170
E2 70 97 108
H2 30 40 49
d 6.5 8.5 9
A0 B B1 B0 202 244 267 282 249 286 320 340 281 292 337 390
D1
D2 CP
B B1 B0
D1: drilling A 88 98 127 167 167 B 111 118 156 166 166 CA 76 76 102 140 140 CP 68 77 91 110 110 D 107 107 136 142 142 D1 65 65 111 110 110 D2 95 95 90 100 100 E1 63 63 87 124 124 E2 95 95 122 124 124 d 5.5 5.5 6.5 7 7 A1 189 204 242 323 323 A0 204 220 267 296 296 B 192 209 234 285 285 B1 168 178 220 255 255 B0 176 187 235 239 239
E1 d
E2
D B
CA
A0
A1
B B
A B CA D 100 140 77 106 126 203 102 145 151 223 190 140
E1 63 87 124
61