Professional Documents
Culture Documents
Cat Konik 1
Cat Konik 1
1 - 2-Octanone 2 - C-10 3 - 1-Octanol 4 - C-11 5 - 2,6-Dimethylphenol 6 - 2,6-Dimethylphenol 7 - C-12 8 - C-13 TKG 1096
Cap. 1: 2
Konik-Tech
Stationary Phase
The selection of the ideal column for a given analysis may look like a complex problem since we need to be right on the selection of the polarity of the stationary phase as well as column length, internal diameter and lm thickness. The polarity of the stationary phase is chosen depending on the kind of compounds you wish to separate. Non polar phases, such as KAP-1 and KAP-5, separate compounds by their boiling points. Intermediate polarity phases such as KAP-WAX, KAP-1701, combine retention by boiling point with the more selective interaction through hydrogen bridges or dipolar moments, etc., and thus provide a higher selectivity. The principal mechanisms of polar phases such as KAP-CN100 (Cyanosilicone with 100% of cyano propyl groups) lie in the dipole-dipole interactions between the functional groups of the stationary phase and those from the substances to be separated. These type of phases retain polar compounds more than non polar ones. In general, non polar phases are more thermally stable than the polar phases. In other words, the higher the column polarity, the lower its thermal stability. Most of the KONIK columns are cross-linked, which results in high thermal stability. The cross-linking in a stationary phase produces slight changes in the physicochemical characteristics of the phase as well as in its polarity relative to the uncross-linked phase. Thus KONIK also oers in its catalog columns with non bonded phases that show the selectivity of the original phase (for instance KAP-SE30, KAP-SE54, KAP-20M, etc).
Column: KAP-5 60m x 0.25mm ID x 0.25m. Carrier gas: He, 25 psi. Oven:110C (Isothermal). Injection: 1l, split. (1:100:250C) Concentration: Aprox. 5ng of each compound on column Detector: FID, 250C Peak Name 1 - 2-Octanone 2 - C-10 3 - 1-Octanol 4 - C-11 5 - 2,6-Dimethylphenol 6 - 2,6-Dimethylphenol 7 - C-12 8 - C-13
Length
The eciency of a chromatographic column (number of theoretical plates per meter) is a function of its length. The standard length used for most of the separations is 25-30 meters. With this length one can obtain a high eciency with relative short times of analysis. Columns of 15m are used for rapid control analyses, reaction monitoring, etc. as well as for the chromatography of high molecular weight substances while columns of 50-60 m, 100 m or 150 m are used for very complex samples. KONIK exclusively has a 150 m column for detail analyses of petroleum and essential oil hydrocarbons. As a general rule, we can say that in a constant temperature chromatographic analysis, the number of theoretical plates and analysis time are directly proportional to the column length while resolution is directly proportional to the square root of the theoretical plates. Thus, we need to take into account that when we double column length, its resolution only increases by 40% whereas analysis time doubles.
Column: KAP-5 30m x 0.25mm ID x 0.25m. Carrier gas: He, 12 psi. Injection: 1l, split. (1:100), 260C Detector: FID, 280C
1 2 3
Peak Name 1 - 2,3-Butanediol 2 - C-10 3 - 1-Octanol 4 - 2,6-Dimethylphenol 5 - C-11 6 - Nonanal 7 - 2-Ethylexanoic acid 8 - 2,6-Dimethylanine 9 - E-10 10 - Dicyclohexylamine 11 - E-11 12 - E-12
4 5 6
11 10
12
GROB test
www.konik-group.com
Cap. 1: 3
Film Thickness
The lm thickness of the stationary phase deposited inside the capillary column exerts an inuence on the number of eective theoretical plates that can be obtained with the column for a given separation, on its loading capacity, on the bleed level and on the elution temperature of a compound. A lm thickness of 0.25-0.32 mm is the standard thickness allowing for a compromise between loading capacity and resolution; and for the injection of samples with a wide volatility range. Thick lms increase retention of the most volatile components whereas thin lms provide faster elution at lower temperatures. As a general rule, thin lms (0.1 m) must be used for compounds with a high molecular weight such as triglycerides, antioxidants, etc., which have elution temperatures over 300C. Thick lms must be used for low boiling substances because thick lms increase the interaction between the substances and the stationary phase. Specically, 3-5 m lms are used to separate solvents, gases, and very volatile substances at room temperature or lower. When the thickness of the stationary phase increases, thermal stability decreases, and thus the bleed level is higher which will limit the maximum operating temperature of the column. The factor denes the relation between the column internal diameter and the stationary phase thickness, thereby helping you to select the most appropriate column for your analysis. In addition, the factor allows for the easy exchange of columns since, for a given analysis with the same stationary phase, similar factors will result in the same or very similar retention times and capacity factors. Of course, this implies taking into account the column loading capacity (phase thickness and internal diameter).
Cap. 1: 4
Konik-Tech
Bleed Level
The bleed level of stationary phase from a capillary column is the parameter which will determine the level of sensitivity in a given assay. It is directly related to the amount of stationary phase in the column and thus with the lm thickness. It also increases exponentially with temperature (Fig.7). A low bleed level will allow you to work without problems with the whole range of modern high sensitivity detectors and at the same time will result in less contamination. This will also allow the quantication of high boiling point or high molecular weight compounds which are analyzed by means of high temperature gradients.
- phase ratio id - column internal diameter df - lm thickness (m)
Maximum Eciency
All manufacturing stages for capillary columns have been optimized in order to be able to oer our customers columns of very high eciency.
Column: TRB-5 15m x 0.25mm ID x 0.25m. Carrier gas: He, 6 psi. Injection: 1l, split. (1:100), 280C Detector: FID, 350C
Bleed level (FID) <4pA (325C)
Maximum Reproducibility
When you select a KONIK column for your analyses you can be assured that each of the steps in the production process has been thoroughly controlled to ensure that there are no deviations from the established quality parameters. All of the steps incorporate the maximum possible automation procedures. This translates into a high reproducibility level with regards to the chromatographic performance of our columns.
Theoretical Plates (N/m) 7.000 - 9.000 4.700 - 5.500 3.300 - 4.600 2.700 - 3.700 1.400 - 2.200
www.konik-group.com
Cap. 1: 5
KAP-1, KAP-1ht, KAP-1MS, 100% dimethyl polysiloxane KAP-SULFUR, KAP-PETRO, KAP50, 2PONA, KAP-2887 KAP-5, KAP-5ht, KAP-5MS, 95% dimethyl - 5% diphenyl KAP-STEROL, KAP-5AMINE, polysiloxane KAP-G27, KAP-5625, KAP-G27 KAP-META.X5 95% dimethyl - 5% diphenyl polysilphenylene
HP-1, HP101, SPB-1, ULTRA-1, DB-1, EQUITY-1 DB-1ht, DB-2887 SPB-1 SULFUR HP-5, ULTRA-2, SPB-5, DB-5, DB5.625, EQUITY-5 DB-5ht, PAS-5 PTE-5, SAC5, PTE-5QTM HP-5TA, DB-5MS MDN-5
BP-5
AT-5
007-2
G27, G36
KAP-1301, KAP-624, KAP-G43 6% cyanopropylphenyl-94% dimethyl HP-1301, HP-624 SPB-1301, polysiloxane DB-1301, DB-624 OVI-43 KAP-14 14% diphenyl-86% dimethyl polysiloxane KAP-20 20% diphenyl-80% dimethyl SPB-20, polysiloxane VOCOL KAP-35 35% diphenyl-65% dimethyl HP-35, DB-35 SPB-35 polysiloxane KAP-1701 KAP-225 KAP-PAG KAP-FFAP KAP-50 KAP-50ht KAP-F50 KAP-WAX 14% cyanopropylphenyl-86% dimethyl polysiloxane 50% cyanopropylphenyl-50% dimethyl polysiloxane 50% poluethylene - 50% polypropylengycol treated polyethyleneglycol for acidic compounds 50% diphenyl-50% dimethyl polysiloxane 50% diphenyl-50% dimethyl polysiloxane 50% triuoropropylmethyl polysiloxane 100% polyethylenglycol HP-1701, PAS1701, DB-1701 HP-225, DB-225 SPB-1701
Rtx-5Sil MS CP-SIL BPX-5 AT-5ms 8 CB Low Bleed/MS Rtx-1301, BPX-624 AT-624 Rtx-624 CPSIL13CB AT-20 Rtx-35 Rtx-1701 Rtx-225 CPSIL19CB CPSIL43CB BPX-35, AT-35 BPX-608 BP-10 BP-225 AT-1701 AT-225
007-5 MS
G43
G7, G19
PAG HP-FFAP, DB-FFAP NUKOL, SP-1000 HP-50+, DB-17, DB-608 DB-17ht DB-210, DB-200 HP-20M, INNOWAX DB-WAX, DBWAXetr SUPELCOWAX-10 Carbowax 20M SPB-50, SPB-2250 STABILWAX- CP-WAX DB 58 CB Rtx-50 Rtx-65 Rtx-200 STABILWAX CP-WAX 52 CB BP-20 CP-SIL 24 CB TAB-CB BP-21 AT-1000, 007-FFAP G25, G35 FFAP AT-50 007-17 G3
007-65HT G17 AT-210 AT-WAX 007-210 007-CW G6 G14, G15, G16, G20, G39
treated polyethylenglycol for basic compounds 100% polyethylenglycol 100% polyethylenglycol 100% biscyanopropyl polysiloxane non bonded phase 50% diphenyl-50% dimethyl polysiloxane bonded phase bonded phase 1,2,3-tris (cyanoethoxy)propane
CAM, HPCarbowaxBasicWax Amine HP-WAX, DB-WAX OMEGAWAX FAMEWAX SP-2340 HP-17 DB-502.2, HP-VOC HP-608 VOCOL SPB-608 TCEP Rtx-502.2 Rt-2340
Cap. 1: 6
Konik-Tech
Amines, hydrocarbons, pesticides, PCBs, phenols, sulfur 100% Dimethylpolysiloxane compounds, avors and fragrances Semivolatiles, alkaloids,drugs, FAMEs, halogenated compounds, pesticides, herbicides Pesticides, herbicides, derived sugars, solvent drugs, aromatic hydrocarbons FAMEs, aromas, solvents, BTEX, alcohols, xilene isomers, alcoholic drinks, aromatics, glycols FAMEs, free acids, phenols, fragrances, acrilates, glycols Organic volatile compounds, alcoholic drinks, aromatic products Specially column for the analysis of amines FAMEs, alditol acetates, neutral sterols EPA methods to the analysis of semi volatile compounds 5% Phenyl 95% dimethylpolysiloxane 86% dimethylpolysiloxane 7%phenyl, 7% cyanopropyl 100% Polyethylene glycol Polyethyleneglycol esteried with nitroterephthalic acid 80% dimethylpolysiloxane 20% diphenyl 95% dimethylpolysiloxane 5% diphenyl 50% dimethylpolysiloxane 25% phenyl, 25% cyanopropyl 95% dimethylpolysiloxane 5% diphenyl
KAP-50, KAP-50ht KAP-PAG KAP-F50 KAP-1301 KAP-624 KAP-14 KAP-META.X5 KAP-CN100 KAP-PETROL KAP-50.2PONA KAP-SULFUR KAP-G43 KAP-G27
CLP-pesticides, aroclors, pharmaceuticals, drugs of 65% dimethylpolysiloxane 35% diphenyl abuse, amines Specically designed for analysing chlorinated Propietary bonded and crosslinked phase pesticides and PCBs. Designed for the EPA 508, 608 and 8080 methods Drugs, glycols, pesticides, steroids, waxes, triglicerydes 50% diphenyl-50% dimethylpolysiloxane FAMEs, solvents, aromas Residual solvents, pesticides, herbicides Pesticides, arochlors, organic volatiles Volatile priority pollutants, EPA Method 502.2 Pesticides, phenols, halogenated compounds Semi volatile compounds analysis FAMEs (cis trans isomers), derived sugars, PCBs, dioxins Analysis of complex mixtures of hydrocarbons according to the ASTM Standards Analysis of hydrocarbons (Paraphine, Olephine, Naftens and Aromatics) Analysis of sulphurous compounds (natural gas, petrol, wines, beers) 50% Polyethylene, 50% Polyepropylenglycol 35% Triuoropropyl- 65% dimethyl polysiloxane 94% dimethylpolysiloxane 6% cyanopropylphenyl 6% Cyanopropyl-phenyl, 94% dimethylpolysiloxane 86% dimethylpolysiloxane 14% diphenyl Silarylene 100% Cyanopropyl Polysiloxane 100% dimethylpolysiloxane 100% dimethylpolysiloxane 100% dimethylpolysiloxane
Mid-polar Polar Polar Mid-polar Polar Low-Mid-polar Non-polar Polar Non-polar Non-polar Non-polar Mid-polar Non-polar
Made to full the specications of the American 94% dimethylpolysiloxane, 6% cyanopropylphenyl Pharmacopea (USP) for the analysis of residual solvents Produced to full the American Pharmacopeas (USP) 95% dimethylpolysiloxane 5% diphenyl specications, for the organic volatiles impurities test in pharmacs Complex mixtures analysis of sterols, from animal or vegetal origin Suitable column for SIMDIS evaluation based on ASTM Test Method D2887 95% dimethylpolysiloxane 5% diphenyl 100% dimethylpolysiloxane
Analysis of volatiles in alcoholic beverages and solvents. 100% Polyethylene glycol Maximum resolution of amylic alcohols. Drugs, glycols, pesticides, steroids 50% diphenyl-50% dimethylpolysiloxane For the analysis of phenol compounds (phenols, cresilic Stationary Phase non bonded acids) FAMEs, Waxes 100% Polyethylene glycol Analysis of alcohols in gasoline Phase1, 2, 3-tris (2-cyanoethoxy) propane
www.konik-group.com
Cap. 1: 7
Application Fatty Acids (Cis-Trans) Sterols Waxes Fatty Alcohols & Stigmastadiene Volatiles Halogenated Solvents Methanol and superiors alcohols
Item n KAP-882162 KAP-182238 KAP-120113 KAP-120232 KAP-140262 KAP-121033 KAP-601833 KAP-601462 KAP-601432 KAP-810532 KAP-816463 KAP-141035 KAP-142168 KAP-820232 KAP-120232 KAP-520232 KAP-910232 KAP-151035 KAP-110232 KAP-830232 KAP-110262 KAP-830262 KAP-603035 KAP-603075 KAP-6030K5 KAP-943035 KAP-943065 KAP-9430K5 KAP-115063 KAP-115065 KAP-141253 KAP-142065
KONIK Phase Capillary Column KAP-CN100 60 m x 0.25 mm x 0.20 um Capillary Column KAP-STEROL 30 m x 0.22 mm x 0.22 um Capillary Column KAP-5 15 m x 0.32 mm x 0.10 um Capillary Column KAP-5 30 m x 0.25 mm x 0.25 um Capillary Column KAP-WAX 60 m x 0.25 mm x 0.25 um Capillary Column KAP-5 30 m x 0.32 mm x 1.00 um Capillary Column KAP-624 30 m x 0.32 mm x 1.80 um Capillary Column KAP-624 60 m x 0.25 mm x 1.40 um Capillary Column KAP-624 30 m x 0.25 mm x 1.40 um Capillary Column KAP-WAX 30 m x 0.25 mm x 0.50 um Capillary Column KAP-WAX 60 m x 0.32 mm x 0.64 um Capillary Column KAP-WAX 30 m x 0.53 mm x 1.00 um Capillary Column SupraWAX-280 60 m x 0.25 mm x 0.25 um Capillary Column KAP-Meta .X5 30 m x 0.25 mm x 0.25 um Capillary Column KAP-5 30 m x 0.25 mm x 0.25 um Capillary Column KAP-5MS 30 m x 0.25 mm x 0.25 um Capillary Column MTI-5 30 m x 0.25 mm x 0.25 um Capillary Column KAP-FFAP 30 m x 0.53 mm x 1.00 um Capillary Column KAPB-1 30 m x 0.25 mm x 0.25 um Capillary Column SupraWAX-280 30 m x 0.25 mm x 0.25 um Capillary Column KAP-1 60 m x 0.25 mm x 0.25 um Capillary Column SupraWAX-280 60 m x 0.25 mm x 0.25 um Capillary Column KAP-624 30 m x 0.53 mm x 3.00 um Capillary Column KAP-624 75 m x 0.53 mm x 3.00 um Capillary Column KAP-624 105 m x 0.53 mm x 3.00 um Capillary Column KAP-Meta.VOC 30 m x 0.53 mm x 3.00 um Capillary Column KAP-Meta.VOC 60 m x 0.53 mm x 3.00 um Capillary Column KAP-Meta.VOC 105 m x 0.53 mm x 3.00 um Capillary Column KAP-1 60 m x 0.32 mm x 5.00 um Capillary Column KAP-1 60 m x 0.53 mm x 5.00 um Capillary Column KAP-WAX 50 m x 0.32 mm x 1.20 um Capillary Column KAP-WAX 60 m x 0.53 mm x 2.00 um Capillary Column KAP-G43 30 m x 0.53 mm x 3.00 um Capillary Column KAP-G27 30 m x 0.53 mm x 5.0 um Capillary Column SupraWAX-280 30 m x 0.32 mm x 0.25 um Capillary Column KAP-624 30 m x 0.32 mm x 1.80 um Capillary Column KAP-17 10 m x 0.53 mm x 2.00 um Capillary Column KAP-608 30 m x 0.25 mm x 0.25 um Capillary Column KAP-Meta .X5 30 m x 0.25 mm x 0.25 um Capillary Column KAP-35 30 m x 0.25 mm x 0.25 um Capillary Column KAP-5MS 30 m x 0.25 mm x 0.25 um Capillary Column KAP-1701 30 m x 0.25 mm x 0.25 um Capillary Column KAP-5MS 60 m x 0.25 mm x 0.25 um Capillary Column KAP-Meta .X5 30 m x 0.25 mm x 0.50 um Capillary Column KAP-5MS 60 m x 0.25 mm x 0.25 um Capillary Column KAP-1ht 15 m x 0.32 mm x 0.10 um Capillary Column KAP-PETROL 100 m x 0.25 mm x 0.50 um Capillary Column KAP-50,2 PONA 50 m x 0.20 mm x 0.50 um Capillary Column KAP-PETRO.150 150 m x 0.25 mm x 1.00 um Capillary Column KAP-2887 10 m x 0,53 mm x 2,65 um Capillary Column KAP-TCEP 60 m x 0.25 mm x 0.40 um Capillary Column MetaBLOOD1 30 m x 0.32 mm x 1.80 um
Wine Flavours Wine Pesticides Phenols and Anisol in bottle caps Wine Glycols Flavours and Fragances
Analysis of Industrial Solvents Pharmacy Industry Residual Solvents in Pharmaceutical Products Alcohol 96 Impurities Sacarine Impurities Chlorinated and Phosphorous Pesticides
KAP-163035 KAP-175035 KAP-830233 KAP-601833 KAP-502045 KAP-360232 KAP-820232 KAP-350232 KAP-520232 KAP-130232 KAP-520262 KAP-820532 KAP-520262
PCB Analysis PAH Analysis Dioxines and Furans Petrochemical Applications Heavies PONA, PNA, PIANO PONA as ASTM D5134 Fuel Detailed Analysis ASTM D2887 Separtion of alifatics, aromatics and alcohols in fuel
Alcohol in blood
Cap. 1: 8
Konik-Tech
KAP-5
KAP-1701 KAP-WAX KAP-FFAP KAP-225 KAP-50 KAP-1MS KAP-5MS KAP-META.WAX KAP - META.X5 KAP-SUPRAWAX-280
KAP-140141 KAP-142141
KAP-120481 KAP-130181 KAP-130481 KAP-140181 KAP-142181 KAP-150181 KAP-250181 KAP-500181 KAP-510181 KAP-520181 KAP-520481 KAP-520181 KAP-810181 KAP-812181 KAP-830181 KAP-832181
KAP-830111 KAP-832111
KAP-5
KAP-1233B9
KAP-1701 KAP-WAX
KAP-513369 KAP-523369
www.konik-group.com
Cap. 1: 9
KAP-111092 KAP-1110K2
KAP-5
KAP-1701
KAP-WAX
KAP-150212 KAP-200212 KAP-201012 KAP-210512 KAP-211012 KAP-251312 KAP-250212 KAP-260112 KAP-260212 KAP-260512 KAP-261012 KAP-351312 KAP-350212 KAP-501312 KAP-500212 KAP-500512 KAP-510212 KAP-511012 KAP-520112 KAP-520212 KAP-521012 KAP-530112 KAP-531312 KAP-550212 KAP-571312 KAP-570212
KAP-260162 KAP-260262
KAP-351362 KAP-350262 KAP-501362 KAP-500262 KAP-500562 KAP-510262 KAP-511062 KAP-520162 KAP-520262 KAP-521062
KAP-1MS KAP-5MS
KAP-550262
Cap. 1: 10
Konik-Tech
KAP-META.WAX
KAP-META.X5
KAP-882152
KAP-882192
www.konik-group.com
Cap. 1: 11
KAP-5
KAP-1701
KAP-WAX
KAP-141233
KAP-141093
KAP-225 KAP-5.625
KAP-260163
KAP-35
KAP-50
KAP-1MS
Cap. 1: 12
Konik-Tech
25
50
100
KAP-PAG KAP-F50
KAP-META.WAX
KAP-META.X5
KAP-SUPRAWAX-280
KAP-CN100 KAP-WAX.DB
KAP-931063
www.konik-group.com
Cap. 1: 13
KAP-110845
KAP-5
KAP-1701
KAP-WAX
KAP-140555 KAP-141065 KAP-142065 KAP-150565 KAP-151065 KAP-200565 KAP-201065 KAP-211065 KAP-213065 KAP-260265
KAP-141045
KAP-151025
KAP-35
KAP-500565 KAP-501065
KAP-5MS
KAP-6030K5
Cap. 1: 14
Konik-Tech
10
25
30 KAP-810535 KAP-811235 KAP-820535 KAP-821035 KAP-821535 KAP-830535 KAP-831035 KAP-832035 KAP-882135 KAP-930535 KAP-931035 KAP-931535
60
75
100
105
KAP-TCEP
KAP-META.VOC
KAP-META.AMINE
www.konik-group.com
Cap. 1: 15
AUC205625
Cap. 1: 16
Konik-Tech
Medium Polarity
Polar
Aquasafe
Base-Deactivated
Column Scribe
Used to cut capillary tubing. Simply pull one smooth edge of the hard ceramic scribe (tilted about 45 degrees) across the column to lightly score the fused silica. Bend the column opposite the score and the column separates cleanly. Description Column Scribe, 10/pk Item No. AUC205312 AUC205312
AUC204002
www.konik-group.com
Cap. 1: 17
Cap. 1: 18
Konik-Tech
Ferrules for Fused Silica Visi-Union For column ID 0.25 mm, 10/pk For column ID 0.32 mm, 10/pk For column ID 0.53 mm, 10/pk AWVFS1.35-R10 AWVFS1.45-R10 AWVFS1.75-R10
AWVEU.5
1/32 Union
Ferrule Remover
Two tools are supplied for capillary ferrules from 0.4 mm to 0.8 mm ID. The tip has a spiral-cut ratchet design that slides into the ferrule easily then grabs on the way out. AUC205315 Description Ferrule Remover, 2/pk Item No. AUC205315
AUC205305
AUC205310
www.konik-group.com
Cap. 1: 19
1/32 Nut 1/32 Ferrule 1/16 Adapter with Removable Liner 1/16 Replacement Liner Valco Removable Adapters 1/16 Nut 1/16 Ferrule
Cap. 1: 20
Konik-Tech
433AINS005/0
433AINS005/1
433AINS005/2
Empty Trap
Adsorbent Trap
www.konik-group.com
Cap. 1: 21
Ferrule Sizes
A 1/16 ferrule actually measures 1/8 in diameter, while 1/8 ferrules measure 1/4 in diameter. Ferrule terminology arose because a 1/16 ferrule was normally used with 1/16 OD tubing, and so required a ferrule about twice a width. Capillary chromatographers use the same 1/16 ttings, even though capillary columns are much narrower than 1/16 tubing.
Cap. 1: 22
Konik-Tech
Stationary Phases
Usually the solid support will be coated with a liquid stationary phase. Exceptions are molecular sieves and porous polymers such as HayeSep or Porapak, which are normally used un-coated. For a complete listing of available stationary phases.
Solid Supports
Porous Polymer Supports HaySep A, B, C, D, DB, DIP, N, P, Q, R, S, T Tenax Porapak N, P, PS, Q, QS, R, S, T Molecular Sieves 4A, 5A, 13X
Packed GC Column
Surcharges apply to the following expensive phases: EGSS-X OV-225 OV-275 OV-330 OV-1701 Polyphenylether Silars Dexsils
*Surcharge will be added **Not required with solid adsorbents such as HayeSep, Molecular Sieves, etc.
www.konik-group.com
Cap. 1: 23
Glass Column
Surcharge Table: Surcharges apply to the following expensive phases: Stationary Phase Surcharges Dexsils EGSS-X OV-225 OV-275 OV-330 OV-1701 Polyphenylether Silars Support Surcharges Chromosorb T Carbon Molecular Sieves HayeSep Porapak Chromosorb 101 - 109 Tenax Carbopacks
Cap. 1: 24
Konik-Tech
OV-351
259 16 81 107 144 15 32 33 16 44 69 119 178 101 40 17 36 146 146 228 629 222 335 67 316
461 57 124 149 233 53 72 72 55 86 113 158 204 143 86 57 108 238 238 369 872 391 552 170 494
311 45 124 153 355 44 65 66 44 81 111 162 208 142 76 45 93 358 358 338 763 273 382 153 637
482 66 189 228 463 64 98 99 65 124 171 243 305 213 114 67 139 468 468 493 1106 417 583 228 531
426 43 145 190 305 41 67 67 42 88 128 202 280 174 85 43 86 310 310 386 849 368 540 171
www.konik-group.com
Cap. 1: 25
Polymer Materials: ACN - Acrylonitrile EGDM - Ethyleneglycoldimethacrylate NVP - N-Vinyl-2-Pyrollidinone PEI - Polyethyleneimine VP - 4-Vinylpyridine DVB - Divinyl Benzene
Molecular Sieve
Molecular sieves are synthetic alumino-silicates of sodium, potassium or calcium, of various pore sizes. The pores are precisely uniform in size. Molecular Sieves are used to separate the xed gases. CO, CH4, O2 and Ar are easily separated at room temperature. 100 g/ bottle Mesh Size 60/80 80/100 AUC485323 AUC485326 AUC485336 AUC485339 AUC485448 AUC485451
Support Molecular Sieve 4A, 100 g Molecular Sieve 5A, 100 g Molecular Sieve 13X, 100g Molecular Sieve 5A
Cap. 1: 26
Konik-Tech
Porapak Q
*Operating conditions: 1m x 2.3 mm ID stainless steel column, 80/100 mesh, 175C, 25 mL/min helium ow; FID detector.
www.konik-group.com
Cap. 1: 27
Glass Wool
Cap. 1: 28
Konik-Tech
Vibrograver
Permanently engraves all hard and semi-hard surfaces; recommended for making column tags and tools. The etched information cannot be erased, wiped o, or rubbed out. Comes with a carbide tip. Description Vibrograver Vibrograver Spare Diamond Tip Spare Carbide Tip Voltage 110/120 230/240 Item No. AUC486211 AUC486212 AUC486213 AUC486214
GC End Caps
AUC205250
AUC486111
www.konik-group.com
Cap. 1: 29