Professional Documents
Culture Documents
EG2002 - Report Template
EG2002 - Report Template
School of Engineering
University of Aberdeen
Kings College
2011-12
Table of Contents
Contents
Table of Contents ........................................................................................................................................... I
List of Figures ................................................................................................................................................ II
List of Tables ................................................................................................................................................. II
Symbols and Abbreviations.......................................................................................................................... III
1. Introduction .............................................................................................................................................. 1
1.1
Background ................................................................................................................................... 1
2011/12
List of Figures
Figure 1: <The first figure insert caption and reference source [ref] if copied>........................................ 2
List of Tables
Table 1: <The first table - insert caption and reference source [ref] if copied ........................................... 2
2011/12
II
2011/12
Description
III
Units
1. Introduction
This template sets out the style requirements for the electronic laboratory reports that need to be submitted
for the continuous assessment exercises of course EG2002 Process Engineering.
Most of the necessary formats have been embedded in this file.
References should be numbered consecutively as they appear in the report with square brackets e.g. [1]. See
reference section for formatting of references.
1.1 Background
Complete a short description of the exercise and a short summary of the background to the exercise.
2011/12
2. Background Theory
Set out relevant background theory taking care to reference all sources (including web sources) correctly.
<Insert Figure Image here>
Figure 1: <The first figure insert caption and reference source [ref] if copied>
Variable 1
(<insert units of
variable 1>)
<insert value>
<insert value>
Variable 2
(<insert units of
variable 2>)
<insert value>
<insert value>
...
...
...
...
Variable n
(<insert units of
variable n>)
<insert value>
<insert value>
Table 1: <The first table - insert caption and reference source [ref] if copied
2011/12
3. Experimental Methodology
Set out the experimental, theoretical, or simulation approach used. Describe the materials used and the steps
followed. There needs to be enough detail to allow the reader to repeat your test using your report alone. Use
figures and table as necessary as per examples presented earlier.
2011/12
4. Results
Present the results and describe them. Do not discuss why the results look as they that is for the next
section. Use figures and table as necessary as per examples presented earlier.
2011/12
2011/12
2011/12
References
[1]
[2]
2011/12
Appendix A
2011/12