Professional Documents
Culture Documents
Superconducting Electric Machine
Superconducting Electric Machine
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.(December 2011)
Superconducting electric machines are electromechanical systems that rely on the use of one or more superconducting elements. Since superconductors have no DC resistance, they typically have greater efficiency. The most important parameter that is of utmost interest in superconducting machine is the generation of a very high magnetic field that is not possible in a conventional machine. This leads to a substantial decrease in the motor volume; which means a great increase in the power density. However, since superconductors only have zero resistance under a certain superconducting transition temperature, Tc that is hundreds of degrees lower than room temperature, cryogenics are required. Now there is more interest in superconducting AC synchronous electric machines (alternators and synchronous motors). The direct current electromagnet field winding on the rotor (rotating member) use superconductors but the alternating current multiphase winding set on the stator (stationary members), which have no practical support by superconductors, uses conventional, normal conductioncopper conductors. Often the stator conductors are cooled to reduce, but not eliminate, their resistive losses.
Contents
[hide]
o o
1 History 2 Present interest 3 Advantages and disadvantages of superconducting electric machines 3.1 Compared with a conventional conductor machine 3.2 High-temperature superconductors versus Low-temperature superconductors 4 References 5 Links
[edit]History
DC homopolar machines are among the oldest electric machines. Michael Faraday made one in 1831.
[citation needed]
windings and normal conductors in their rotating pickup winding. In 2005 the General Atomics company received a contract for the creation of a large low speed superconducting homopolar motor forship propulsion. Superconducting homopolar generators have been considered as pulsed power sources for laser weapon systems. However, homopolar machines have not been practical for most applications. In the past, experimental AC synchronous superconducting machines were made with rotors using low-temperature metal superconductors that exhibit superconductivity when cooled with liquid helium. These worked, however the high cost of liquid helium cooling made them too expensive for most applications. More recently AC synchronous superconducting machines have been made with ceramic rotor conductors that exhibit high-temperature superconductivity. These have liquid nitrogen cooled ceramic superconductors in their rotors. The ceramic superconductors are also called high-temperature or liquid-nitrogen-temperature superconductors. Because liquid nitrogen is relatively inexpensive and easy to handle, there is a greater interest in the ceramic superconductor machines than the liquid helium cooled metal superconductor machines.
[edit]Present
interest
Present interest in AC synchronous ceramic superconducting machines is in larger machines like the generators used in utility and ship power plants and the motors used in ship propulsion. American Superconductor and Northrup Grumman created and demonstrated a 36.5 MW ceramic superconductor ship propulsion motor.
[edit]Advantages
[edit]Compared
Superconducting electric machines typically have the following advantages: 1. 2. Reduced resistive losses but only in the rotor electromagnet. Reduced size and weight per power capacity without considering the refrigeration
equipment. There are also the following disadvantages: 1. The cost, size, weight, and complications of the cooling system.
2.
leave their superconductive state. 3. A greater tendency for rotor speed instability. A superconducting rotor does not have
the inherent damping of a conventional rotor. Its speed may hunt or oscillate around its synchronous speed.
4.
5.
Motor bearings need to be able to withstand cold or need to be insulated from the
cold rotor. As a synchronous motor, electronic control is essential for practical operation.
Electronic control introduces expensive harmonic loss in the supercooled rotor electromagnet.
[edit]High-temperature
obtainable liquid nitrogen temperatures, which is much more economical than liquid helium that is typically used in low-temperature superconductors.
2. 3.
HTS are ceramics, and are fragile relative to conventional metal alloy
superconductors such as niobium-titanium. Ceramic superconductors cannot be bolted or welded together to form
superconducting junctions. Ceramic superconductors must be cast in their final shape when created. This may increase production costs.[citation needed]
4.
oscillating magnetic fields. This could be a problem during transient conditions, as during a sudden load or supply change.[citation needed]
[edit]References
Bumby, J. R., Superconducting Rotating Electrical Machines, Oxford: Clarendon Press, 192
pages, 1983.
Kuhlmann, J. H., Design of Electrical Apparatus, 3rd edition; New York: John Wiley & Sons,
Inc., 512 pages, 1950. <Note, this book does not consider superconducting machines. However, it provides excellent detailed design information that could be used when designing a superconducting machine.>
Motor, ProQuest Direct Complete Database, Publication No. AAT LD03278, 227 pages, 1995. <Literature evaluation, analysis, experimental results, and a large bibliography.>
[edit]Links
American Superconductor, AC synchronous superconducting ceramic motors and
generators http://www.amsc.com/
motor/index.php