Professional Documents
Culture Documents
EDR Enews 069
EDR Enews 069
EDR Enews 069
Chilled Beams
Introduction Types of Chilled Beams Benefits of Chilled Beams Design Considerations Training Highlights About e-News
hilled beams are among the recent energy-saving innovations making their way to the U.S. market. Chilled beam technology, which involves locating a low-temperature radiator at ceiling level to cool the rising warm air, has been utilized in Europe and Australia for more than a decade. Once cooled, the air slowly descends into the occupied zone, providing adequate cooling with minimal air movement and fan power, while providing an unobstructed radiant heat sink above the occupied zone.
Chilled beams have emerged in the United States as an attractive alternative to variable air volume (VAV) systems and have been proven to be effective in conditioning both new and existing buildings. Their flexibility, ease of installation and maintenance, and energy efficiency present a cost effective alternative to more conventional cooling systems.
(continued on page 2)
Active Chilled Beams Active chilled beams incorporate tempered ventilation air, supplied through ducting in the beam itself, and provide ventilation air to a space through induction nozzles. These nozzles create a pressure differential across a cooling coil, inducing air flow from the room across the coil and supplying cool air back to the room that is a mixture of the tempered ventilation air and the recirculated room air. The cooled air enters the room via outlet slots on the underside of the beam. Because they rely upon powered air movement, rather than just buoyancy, active beams can also be used for heating by supplying hot water to the heat exchanger. Multi-Service Chilled Beams Mutli-Service Chilled Beams are similar in function to active chilled beams, but they may also act as a conduit to supply other building services such as lighting, speaker systems, IT systems, fire protection (sprinklers and detectors), acoustic insulation, Building Automation System sensors, and photocells.
ability to use higher chilled water supply temperatures (65F to 59F). This allows the chiller system to operate more efficiently and to potentially make greater use of waterside economizer control. In addition, chilled beams allow fans to operate at lower speeds, meaning that both the fans and chiller are doing less work to achieve the same amount of cooling as in a conventional system. As mentioned above, designing ventilation rates for occupancy rather than to offset heat gains can reduce the number of air changes per hour in laboratories and other buildings with large internal equipment loads, resulting in further energy savings. For example, in a typical laboratory, ventilation rates can be reduced from 12 to 18 air changes per hour to 6 to 8 air changes per hour. Smaller Equipment Required, Smaller First Cost With fewer air changes needed, ductwork, air-handling units, exhaust fans, chillers, and boilers can all be downsized. In new construction, this avoided first cost can help to offset the cost of the chilled beam units and infrastructure. Even in 2005, with contractors relatively unfamiliar with the technology, the savings from downsizing the HVAC components were found to offset the first cost of an entire chilled beam system. Indoor Air Quality Depending on the location, air may be re-used locally with chilled beams, so no contaminant mixing occurs. This results in a cleaner, healthier indoor environment, without energy penalties for introducing large quantities
(continued on page 3)
of outside air. Although chilled beams are well suited for managing the cooling loads in some laboratories, they can be an unacceptable solution in others due to heightened indoor air quality concerns. In areas with potentially dangerous contaminants, many laboratories prohibit recirculation. Maintenance Depending upon the type of installation, chilled beams contain few or no moving parts. The fact that there are no internal fans or filters to repair or clean accounts for a long life expectancy and hassle free operation. In general, all maintenance associated with a chilled beam system will be at the central plant. This compares favorably to HVAC systems that have dampers and/or actuators at each terminal box.
Design Considerations
As with any technology, chilled beams also have some some limitations. Here are a few ways in which chilled beams may require extra consideration: Humidity Control In humid climates, humidity controls may be a necessary addition to chilled beam systems. If not properly controlled, humidity levels may cause condensation on the surface of chilled beams. To avoid this problem, the internal humidity must be controlled such that the beam temperature is always above the dew point temperature of the air. A rule of thumb states that relative humidity should be kept below 50F to 55F dew point. This is equivalent to a maximum relative humidity of 50% to 55% at 72F. If it is not possible to control the humidity in the space, chilled beams may not be the preferred method for providing space cooling. Ventilation Many of the benefits derived from chilled beams come from their ability to recirculate the air within a space. When necessary, fresh ventilation air can be provided via conventional means or as part of an Active Chilled Beam system. Aesthetics Chilled beams can be integrated into a ceiling grid or left exposed. Aesthetic considerations may also include minimizing the visual impact of the beam. Manufacturers may work with design teams to customize the appearance of the chilled beams through molds and extrusions that better adapt to the facilitys architecture. In addition, the design and layout of chilled beams may incorporate key infrastructure components, such as lights, sprinkler heads, speakers, sensors, air nozzles, smoke detectors, and voice/data cables.
(continued on page 4)
www.rdmag.com/Lab-Design-News/ Articles/2009/10/Lab-Engineering-ChilledBeams-In-Laboratories-Part-Three/
Chilled Beams in Labs: Eliminating
Control
About e-News
ont miss future issuesto sign up for a free email subscription, please visit www.energydesignresources.com. Send letters to the editor, suggestions on topics for future issues, or other comments to enews@energydesignresources.com. e-News is published by Energy Design Resources (www.energydesignresources.com), an online resource center for information on energy efficiency design practices in California. Savings By Design (www.savingsbydesign.com) offers design assistance and incentives to design teams and building owners in California to encourage high-performance nonresidential building design and construction. Energy Design Resources and Savings By Design are funded by California utility customers and administered by Pacific Gas and Electric Company, Sacramento Municipal Utility District, San Diego Gas and Electric, Southern California Edison and Southern California Gas Company, under the auspices of the California Public Utilities Commission.
The design team must consider the location and spacing of chilled beams to ensure adequate coverage of the space. In order to achieve proper interior thermal comfort, the building automation system or building operator can chose to control chilled beams individually, or controlling grouped regions of chilled beams. Acoustics Passive beams are virtually noise free, as no fans are incorporated into the system. Active beams utilize relatively low airflow ratestypically around 40 CFM. However, it is recommended to incorporate a suitable acoustic in-fill membrane into the design to enhance sound absorption, without inhibiting air flow to or from the beam. Cost One 2005 study showed that in one typical 14,100 square-foot laboratory, installation of a chilled beam system was less than the cost of a standard VAV system, coming in at just 84% of the cost of the conventional system. Even a chilled beam installation with integrated lighting cost just 96% of the VAV system installed first cost. Maximum Capacity Chilled beams may not be an effective solution for spaces with exceptionally high cooling loads, which would require an impractical number of chilled beams to be installed in the ceiling. Spaces with such loads will likely be better served by a conventional cooling system.
Training Highlights
California utilities offer outstanding educational opportunities that focus on the design, construction and operation of energyefficient buildings. Listed here are a few of the many upcoming classes and events; for complete schedules, visit each utilitys website. Implementing Energy Efficiency Projects Energy managers and maintenance professionals will learn how to perform energy assessments, screening audits, feasibility studies, and the selection of proper equipment for commercial and industrial facilities. Come learn how to do a basic audit of your facility to determine if new equipment is worth the investment. See: https://www.sce.com/ECR/EnergyCenterClassSchedule. aspx?ORG=CTAC,OTHER Title 24, 2008 is now in effect Most utilities will be holding training sessions to discuss the latest revisions to the envelope, lighting, and mechanical components of Title 24. The new standards took effect January 1, 2010. Edison CTAC: Title 24 Energy Efficiency Standards What to Expect in 2008/2009? See: https://www.sce.com/ECR/ EnergyCenterClassSchedule.aspx?ORG=CTAC,OTHER San Diego Energy Resource Center: Preparing for Californias New Nonresidential Title 24 Standards. See: https://seminars.sdge.com/ iebms/coe/coe_p2_details.aspx?eventid=5843&sessionid=fh1fdlf hnfd3fd5ff2 New PG& E Training Schedule The Pacific Energy Center and the Stockton Training Center will issue new schedules at the end of January. Check out what is now available at: http://www.pge.com/mybusiness/edusafety/ training/pec/classes/ Introduction to Life-Cycle Costing Life-Cycle Costing (LCC) is an economic analysis method that helps building owners, designers, and operations managers assess the cost benefits of energy efficient technologies, designs, and operations. Using interactive discussion and examples, attendees will learn about the role of key assumptions and how to interpret an LCC analysis. See: https://www.sce.com/ECR/ EnergyCenterClassSchedule.aspx?ORG=CTAC,OTHER Benchmarking with ENERGY STAR Portfolio Manager As of 2010 non-residential building owners and operators will be required to disclose Energy Star Benchmarking ratings on their lease to prospective lessee, buyers or lenders. More than 9 billion square feet of US buildings have already used US EPAs ENERGY STAR portfolio manager tool. This fast-paced course will address the pros and cons of various benchmarking techniques, tips for optimizing your ENERGY STAR score, and best practices for improving the score over time. See: https://seminars.sdge.com/ iebms/coe/coe_p2_details.aspx?eventid=5841&sessionid=fhkfd1 fhofd9fdkei3